TEXAS’ SOLUTION FOR HIGH QUALITY …...2018/07/11 · TEXAS’ SOLUTION FOR HIGH QUALITY COMPRESSED AIR AND PROCESS GAS SYSTEMS WHO WE ARE TEXAS Compression Services supplies and

TEXAS’ SOLUTION FOR

HIGH QUALITY COMPRESSED AIR

AND PROCESS GAS SYSTEMS

WHO WE ARE TEXAS Compression Services supplies

and services air compressors, gas

compressors and ancillary equipment

to meet the demands of the Texas

market. In addition to supplying stand

alone compressors, our engineering

team is here to help customize

systems to meet your specific

requirements.

TCS supplies and services the Industrial, Oil & Gas,

Petrochemical, Food & Beverage, Pharmaceutical,

and Medical industries with Gardner Denver air

compressing products including Quantima,

Hydrovane, Champion and Reavell. Gardner

Denver’s product range has been developed and

honed through nearly 200

years of experience within the industry.

To accommodate the gas industry, Texas

Compression Service offers a complete

line of Gardner Denver and Leroi gas

compressors. Gardner Denver has been

supplying process gas compressors

specifically designed to meet the

demands of the gas industry for over

25 years, building a reputation as one

of the major suppliers in the industry.

TCS is part of the IGS family of

companies including Generon,

Houston Vessel Manufacturing,

Global Nitrogen Services, and

ACFM.

LOCAL COVERAGE

Texas Compression Services is headquartered in

Houston, Texas, with Sales and Service Personnel

stationed in Houston, Beaumont, Corpus Christi,

Austin, and San Antonio, Texas.

Our Service Technicians can service

any type or brand of compressor

or compressor equipment and are

ready assist you 24-hours a day,

7- days a week.

PRODUCTS

COMPRESSORS

Rotary Vane Compressors

Rotary Screw Compressors

Reciprocating Air Compressors

Gas Compressors

High Pressure Compressors / Boosters

Centrifugal Compressors

Medical Air & Vacuum

Engineered Packaged Systems

ANCILLARY

EQUIPMENT

Air Dryers

Storage Tanks / Air Receivers

Nitrogen Generators

Filters

Oil Mist Eliminators

Condensate Drains

Oil / Water Separators

Aluminum Piping

ROTARY SCREW

COMPRESSORS

OIL-LESS

Flow: 9.2 to 655 CFM

Discharge Pressure: 75 to 145 psig

Horsepower: 3 to 150 HP

Oil Content: non-detectable

OIL-FREE

Flow: 444 to 2,504 CFM


Horsepower: 100 to 450

HP Oil Content: non

detectable

LUBRICATED

Flow: 6.3 to 2,459 CFM


Horsepower: 2 to 500 HP

Oil Content: 1 to 3 ppm

VANE COMPRESSORS

GARDNER DENVER–

HYDROVANE

LUBRICATED



Horsepower: 2 to 60 hp

Oil Content: less than 3 ppm

Provides consistent supply of high quality,

pulse free air

Designed to handle difficult environments

TEXAS COMPRESSION SERVICES www.texascompressionservices.com

http://www.texascompressionservices.com/

PRODUCTS

RECIPROCATING

COMPRESSORS—

HIGH PRESSURE

High Pressure Compressors and Boosters

High Pressure 230 psig up to 6000 psig

Multi-stage reciprocating air and

water-cooled lubricated machines

AIR-COOLED PRODUCTS:

5200 Series: 230 to 580 psig



WATER COOLED PRODUCTS:




RECIPROCATING

COMPRESSORS—

LOW PRESSURE

Units are supplied as belt driven,

base mount, simplex, duplex or skid

packaged complete with dryer, air

receiver, filtration with a multitude of

common options.

PRESSURE LUBRICATED

Flow: 6 to 127 CFM


Horsepower: 1.5 to 30 HP


SPLASH LUBRICATED

Flow: 6 to 127 CFM


Horsepower: 1.5 to 30 HP


OIL-LESS



Horsepower: .75 to 15

Oil Content: non detectable

OIL-FREE CENTRIFUGAL

COMPRESSORS

DELIVERING A MAJOR

BREAKTHROUGH IN OIL-FREE

COMPRESSOR TECHNOLOGY

No gearbox, no oil, no contacting

points & no mechanical wear. Just

a single moving part, spinning in a

magnetic field at up to 60,000 rpm.

Offering outstanding energy efficiency,

reliability and low environmental impact.

Quantima also offers low noise levels at

69dB(A) and a physical footprint around

40% smaller than a standard oil-flooded

compressor.

Meets ISO 8573-1 Class 0 specifications

Flow: 998 to 2,504 CFM

Discharge Pressure: 43 to 116



OIL-LESS SCROLL

COMPRESSORS

COMPRESSED AIR FOR MEDICAL

AND LABORATORY APPLICATIONS

Meets NFPA99 strict requirements

Open and Sound attenuated cabinets offered

Tank–mounted and base mounted

solutions offered

Industrial configurations / solutions available

Medical and laboratory vacuum availability

Flow: 9.2 to 32.3 CFM

Discharge Pressure: up to 116

Horsepower: 3 to 10




PRODUCTS

OIL-FREE ROTARY

SCREW COMPRESSOR

OIL-LESS AND OIL-FREE TECHNOLOGY

20 to 150 HP single-stage water inject

100 to 420 HP two-stage dry screw

Variable speed drive offered

Available in water and

air-cooled versions

Sound attenuated cabinets offered

as standard

Meets ISO 8573-1 Class 0 specifications

OIL-FREE VARIABLE SPEED

CENTRIFUGAL

Flow: 82.7 to 1,804 CFM




Oil-Less

OIL-LESS

RECIPROCATING

COMPRESSOR

DELIVERING A MAJOR

BREAKTHROUGH IN OIL-FREE

COMPRESSOR TECHNOLOGY

Tank–mounted and base mounted

solutions offered

An addition to our scroll Medical

Air offering which meets NFPA99

specifications

Offered in Simplex, Duplex, Triplex,

and Quadplex configurations

Flow: 1.7 to 69 CFM (single unit)


Horsepower: .75 to 15 (single unit)


AIR DRYERS

REFRIGERATED

38°F Dew Point

High Ambient Dryer 20 to 125 scfm and

185 degrees F inlet, max 175 psig

High Pressure Dryer 30 to 3,000 scfm inlet

and up to 725 psig inlet

Cycling Refrigerated Dryer 90 to 675 scfm @

max pressure 232 psig

High Capacity Refrigerated Dryer 2,000 to

20,000 scfm @ 175 psig

Non Cycling Refrigerated Dryer 10 to 3,000 scfm

TWIN TOWER DESICCANT

-40°F Dew Point

Heatless Desiccant 40 to 10,000 scfm @ 150 psig

Heated Desiccant dryer 300 to 10,000 scfm @

150 psig

Blower Purge Desiccant 500 to 10,000 scfm @

150 psig

SINGLE TOWER DESICCANT

-40°F Pressure Dew Point

Flows from 5 to 30 scfm @ 150 psig

GARDNER DENVER AND GENERON IGS—

MEMBRANE DRYERS

Inlet flows from fractional cfm to 175

Max pressure 200 psig, dew point is

dependent on temperature

AIR TREATMENT

In-line Filtration

Condensate treatment systems

Condensate drains



PRODUCTS

NITROGEN

GENERATORS

GENERON IGS

Texas Compression Services has

cabinet-sized nitrogen generators and

small skidded systems to meet your site’s

nitrogen generation needs. These are

fabricated by our sister company

Generon IGS.

Purities available from 95% to 99.9995%

We have the ability to meet flow

demands for any application.

COMPRESSED

AIR PIPING

Sizes from .5” to 8”

Calibrated aluminum pipe meets

ASME/ANSI B31.1 power piping

system code

No plastic fittings as offered by

competitive providers

Offers ease of installation and

transition to other piping material

AIR RECEIVERS /

STORAGE TANKS

Standard and custom designed

receivers from 100 to 10,000 gallons

Pressures up to 5,000 psig

ENGINEERED

SYSTEMS

In partnership with our sister company,

Generon IGS, Texas Compression Services

can assist with the detailed engineering,

planning and installation of custom

engineered solutions. Our experienced

engineering staff is highly-skilled at

meeting approval drawings and Vendor

Data Requirement List (VDRL) criteria.

We have the capabilities to design

compressors based on your specifications.



PRODUCTS

GAS COMPRESSORS

Gardner Denver is one of the world’s leading suppliers of rotary screw gas

compressors for VRU, gas gathering, bio gas, landfill gas and other applications and

offers more features per horsepower, more features for your dollar, more options

to match your job, and more efficiency to save on your power costs. The savings of

owning and operating a Gardner Denver Rotary Gas Compressor begin to build the

minute you turn it on and keep building throughout its long, productive life.

RENTALS, SERVICE

& PARTS

Our factory trained service technicians

are prepared to service your

compressed air system 24/7.

Factory approved Oil will be used in

repairing your equipment.

The majority of time equipment can be

SINGLE & TWO-STAGE ROTARY

SCREW COMPRESSORS AVAILABLE

Flow: 20 to 15,000 MSCFD

Power Requirements: 10 to 800 HP

Suction Pressures: 20” HG to

50 PSIG

Discharge Pressures: up to

500 PSIG

STANDARD FEATURES

Ability to adapt to various input speeds

Heavy duty bearings

Turn-valve Capacity Control:

60% turn down

No Yellow Metals in contact with

gas flow

Corrosion Resistant Ductile Iron Rotors

AVAILABLE OPTIONS

Frame mounted oil pumps (all models)

SAE and NEMA Mounts

Gas / Oil Reservoirs with ASME and

CRN Registry

Reciprocating gas compressors

available up to 250 PSIG.

repaired or replaced on sight.

Any customer we have a service contract

with will receive rental equipment at a

reduced rate.

Our service technicians can service all

brands and all types of compressors.

Service contracts available.

Start-up service offered.

Emergency services, and temporary

rental of compressors offered to ensure

you still meet your air compression

needs while your system is down.



TEXAS COMPRESSION SERVICES

IS AN AUTHORIZED DISTRIBUTOR

OF THE FOLLOWING:

TEXAS COMPRESSION SERVICES

HEADQUARTERS

16250 Tomball Parkway

Houston, Texas 77086

Phone: 713-550-1556

Fax: 713-937-5250

[email protected]

www.texascompressionservices.com

generon.com globalnitrogenservices.com houstonvessel.com acfm-inc.com

WE ARE AUTHORIZED DISTRIBUTOR OF:

Industrial Compressors

Industrial Air Dryers

Ancillary Equipment

Nitrogen Generators

Compressed Air Piping

Air Receivers & Storage Tanks

Engineered Systems

mailto:[email protected]


Documents

TEXAS’ SOLUTION FOR HIGH QUALITY …...2018/07/11 · TEXAS’ SOLUTION FOR HIGH QUALITY COMPRESSED AIR AND PROCESS GAS SYSTEMS WHO WE ARE TEXAS Compression Services supplies and