Testing and Profiling in Mobile Devices Camera Ready

Embed Size (px)

Citation preview

  • 8/3/2019 Testing and Profiling in Mobile Devices Camera Ready

    1/2

    Testing and profiling Internet

    services in mobile devices

    Almudena Daz and Pedro Merino

    Dpto. Lenguajes y Ciencias de la Computacion,University of Malaga,

    Campus Teatinos, Malaga, Spain{pedro,almudiaz}@lcc.uma.es

    http://lcc.uma.es/~pedro/mobile

    Abstract. UMA proposes a novel testing facility based on normal mo-

    bile devices as testing nodes, exposing their functionalities through anew technology agnostic control node (UMA controller). This solutionwill provide a scheme to deploy experiments not only on top of currentmobile technologies (e.g. UMTS, HSPA...) but also over the upcomingLTE or LTE Advance standards as they are introduced in the market.

    Keywords: testing, facility, connectivity, performance, mobile services

    1 Introduction

    Recently, the interest in packet data mobile services has grown driven by key ap-plications such as VoIP or video streaming, as opposed to circuit switched legacy

    voice services. This trend is also in line with the evolution of 3GPP mobile tech-nologies, as there has been a clear move towards All-IP mobile networks. Alsomobile data services have been shown to provide high added value to citizens,complementing traditional services provided by fixed networks. In this contextit is key to ensure than the new improvements in the architecture of cellular net-works provide appropriate capabilities for supporting advanced mobile Internetservices assuring optimum levels of user experience.

    UMA (University of Malaga) is developing a testing facility for supporting thecomplete development process of Internet services and applications for mobiledevices.The facility is based on the instrumentation of commercial mobile devicesand their use as measurement tools. Currently the facility enables the executionof manual measurement campaigns during the execution of data services on

    the instrumented mobiles, however the purpose is to provide a remote accessto schedule and perform unattended measurement campaigns. The facility isenvisioned to targets data connectivity and performance over cellular networks(GSM, GPRS, UMTS, HSPA and LTE), mobility procedures analysis, IP trafficmonitoring, code inspection, energy consumption and location. At present thefunctionality offered focuses on network, traffic, battery and location monitoring.In future extensions of the facility it is envisioned the need to include code related

  • 8/3/2019 Testing and Profiling in Mobile Devices Camera Ready

    2/2