2
Valuable Laboratory Testing Services With an increasing need to test and verify components, it is essential to have a complete, full service corrosion and materials laboratory available at all times. DNV provides laboratory testing to assist with a wide range of practical solutions when evaluating and selecting materials, coatings, inhibitors and qualifying new technologies. Our scientists have extensive experience in designing laboratory tests and selecting the critical variables that permit accurate simulation of field conditions. We provide testing, certification and verification of materials and technologies in accordance with NACE, ASTM, CSA, ISO, NORSOK and DNV standards. Where standards do not exist, we can help develop requirements and customize tests to qualify new technology. We offer a variety of testing techniques for many materials, corrosion and integrity problems including: Electrochemical techniques (EIS, CPP, CPT, CCT, ECPT, etc.) Environmentally induced corrosion Coupon testing for internal corrosion Microbiological testing Multiphase flow testing Inhibitor and coating testing Constant, cyclic and slow strain rate loading Elastomers—non-metallic materials Hydrogen sulfide testing High temperature and pressure testing in different environments Soil testing: chemistry, cations, anions, pH, resistivity, LPR, physical properties and particle distribution DNV provides you with cost effective solutions to materials, corrosion and integrity problems. Providing a full range of materials and corrosion testing services Testing and Qualification DNV (Columbus) 5777 Frantz Road Dublin, OH 43017 USA 614.761.1214 [email protected] www.dnvcolumbus.com

Testing

Embed Size (px)

DESCRIPTION

We provide testing, certification and verification of materials and technologies in accordance with NACE, ASTM, CSA, ISO, NORSOK and DNV standards. Where standards do not exist, we can help develop requirements and customize tests to qualify new technology. We offer a variety of testing techniques for many materials, corrosion and integrity problems including:  Elastomers—non-metallic materials  Coupon testing for internal corrosion  Hydrogen sulfide testing

Citation preview

Page 1: Testing

Valuable Laboratory Testing Services

With an increasing need to test and verify components, it is essential to have a complete, full service corrosion and materials laboratory available at all times. DNV provides laboratory testing to assist with a wide range of practical solutions when evaluating and selecting materials, coatings, inhibitors and qualifying new technologies. Our scientists have extensive experience in designing laboratory tests and selecting the critical variables that permit accurate simulation of field conditions. We provide testing, certification and verification of materials and technologies in accordance with NACE, ASTM, CSA, ISO, NORSOK and DNV standards. Where standards do not exist, we can help develop requirements and customize tests to qualify new technology. We offer a variety of testing techniques for many materials, corrosion and integrity problems including:

Electrochemical techniques (EIS, CPP, CPT, CCT, ECPT,

etc.)

Environmentally induced corrosion

Coupon testing for internal corrosion

Microbiological testing

Multiphase flow testing

Inhibitor and coating testing

Constant, cyclic and slow strain rate loading

Elastomers—non-metallic materials

Hydrogen sulfide testing

High temperature and pressure testing in different environments

Soil testing: chemistry, cations, anions, pH, resistivity, LPR,

physical properties and particle distribution

DNV provides you with cost effective solutions to materials, corrosion and integrity problems.

Providing a full range of materials and corrosion testing services

Testing and Qualification

DNV (Columbus) 5777 Frantz Road Dublin, OH 43017 USA 614.761.1214 [email protected] www.dnvcolumbus.com

Page 2: Testing

Providing a full range of materials and corrosion testing services

Testing and Qualification

State-of-the-Art Equipment

DNV provides specialists for assistance in selecting optimal test sequences and producing the desired information at the most economical cost. We also have modern equipment to perform tests to meet your needs, including:

Online sensors and sacrifical anodes

Constant, cyclic and slow strain rate loading

Over 50 autoclaves

Pressure, Volume, Temperature (PVT) quartz window cell

Salt fog chamber

UV exposure cabinet

Potentiostats, FRAs, ZRAs, RDE, RCE

Atomic Force Microscope (AFM) and Near-Field Scanning

Optical Microscope (NSOM) for in-situ characterization of processes at the surface level

Scanning Electron Microscope (SEM) with Energy Disper-sive Spectroscopy (EDS)

UV microscope

Flow loop Pressure: up to 10 bars Temperature: up to 130◦ C Superficial Gas Velocity: 0 to 25 m/s Superficial Liquid Velocity: 0 to 5 m/s Liquid Viscosity Range 0.5 to 300 cP

DNV (Columbus) 5777 Frantz Road Dublin, OH 43017 USA 614.761.1214 [email protected] www.dnvcolumbus.com