8
Tested by SIBERIA Cars chassis spare parts from elastomers

Tested by SIBERIA Cars chassis spare parts from elastomers

Embed Size (px)

DESCRIPTION

Types of car suspension parts

Citation preview

Page 1: Tested by SIBERIA Cars chassis spare parts from elastomers

Tested by SIBERIACars chassis spare parts from elastomers

Page 2: Tested by SIBERIA Cars chassis spare parts from elastomers

Life in the North - is the existence on the edge of the Ecumene – the probable inhabited world.During about six months of the year it is enough to spend half an hour in the outdoors without clothes to die - even in the presence of food and water.

Here are the harshest conditions for a life on Earth: nowhere in a desert healthy person dies within 30 minutes exposure to the air. The cold affects both people and technics. The average winter temperature in Siberia drops down to – 40 degrees Celsius. Here are the most severe road and weather conditions in the world.

Temperature

Standard equipment impact

-6 Preheating is required for internal combustion engines

-15 Parts from high-carbon steel are likely broken; batteries must be pre-warmed. The first threshold value for the standard equipment

from -25 to -30

Unalloyed steel is broken; car engines, fuel tanks and oil tanks must be thermo insulated; frost-resistant rubber is required; standard pneumatic hoses are merely broken.

-30 Operating temperature limit for any standard equipment

Tested by Siberia

Threshold values for the cold in Siberia

Page 3: Tested by SIBERIA Cars chassis spare parts from elastomers

Types of car suspension parts

Page 4: Tested by SIBERIA Cars chassis spare parts from elastomers

The main advantage is that all our car parts are made of polyurethane, which performs better than rubber by following characteristics: polyurethane works better on break, it is a more elastic material than rubber. Polyurethane is also less susceptible to the effects of different environments, and it is also ozone – hydro – Oil – resistant material.

Another advantage is that our armored bushings are manufactured with polyurethane and metal bonding at the molecular level – the same way as original manufacturers do.

Comparative characteristics of polyurethane and rubber:

Main advantages of our car parts

Physical and mechanical properties Polyurethane Rubber

Operating temperature -40 °С, + 120 °С -35 °С, + 150 °С

Temperature limit of elasticity -77 °С -70 °С

Shore A hardness, schedule A 62-68* 65-75

Elasticity modulus. Stretching – 100% Stretching – 300%

29 MPa67 MPa

12 MPa-

Tensile strength at break 312 115

The changes of mass when exposed to aggressive environment

+ 5,98 % + 35 %

*- Sometimes polyurethane with hardness of 80 - 82 is used for the heavy load purposes.

We provide one year warranty, regardless the mileage.

Page 5: Tested by SIBERIA Cars chassis spare parts from elastomers

DURABILITYPU is much more durable than rubber. It is highly resistant to abrasion, corrosive environments, destruction of high dynamic loads and deformations.COMFORTPU parts maintain the perfect geometry of a suspension, providing the driving safety and comfort.

PROFITABILITYPU bushings are easier to install than the original ones. Car parts are sold separately from the control arms and the clients do not have to overpay for the control arm itself – it is a significant plus, considering the world is on course for a new financial crisis.

The advantages of working with Siberian BushingMany years of experience, highest quality and widest range of products. Car parts are easy to sellFrom the very beginning, Siberian Bushing is being developed for Russian roads which surely have the worlds heaviest conditions, and for the most severe climate of Russian Siberia.

For high – quality and high – performance installment each car part is provided along with the instructions translated into your language.

Our products

Page 6: Tested by SIBERIA Cars chassis spare parts from elastomers

On-line serviceThe advantages of working with Siberian Bushing

Convenient selection and ordering service with our on-line catalogues. When entered our web site Siberianbushing.com registered as a wholesale buyer, you can easily select a car part in a «Car part search» section.

OEM and production number recognition service

Catalogue-based selection

* for wholesale buyers the applicability for car parts is displayed

Page 7: Tested by SIBERIA Cars chassis spare parts from elastomers

Terms of cooperationEarn 42% and more with us!Minimal mark up on a selling price is 42% for the recommended retail price.

Obviously, to start earning money it is essential to have the minimum product range. We provide the wholesale buyers with price discounts depending on the initial purchase amount.

Shipment terms – 100% prepayment. After receiving full payment we ship your order. The delivery is carried out by a transport - forwarding company, courier service or any other means, as agreed mutually.

Discount providing terms Terms for the discountmaintaining

Minimum selling price mark up for the recommended retail price is 42% approx.Example: our selling price for you for the car part is 3,28 $.You can sell it at least for 4,65 $.

The initial purchase amount should be >15000 $

During 6 months period the value of the products ordered should be not less than15000 $

Page 8: Tested by SIBERIA Cars chassis spare parts from elastomers

Head office: Fulcrum Co.LtdVladivostok, 6/A Selskaya streetPhone: 8 (423) 230-02-91Phone: 8 (423) 230-02-92http://Siberianbushing.com/e-mail: [email protected]

All rights reserved. The information presented is the intellectual property of the Fulcrum Co.Ltd and is protected by the Copyright law. Any copying, reproduction, distribution or any other use of the information is strictly prohibited! For violation of these rules occurs liability under the Russian Federation law.

Contact us: