HP Storage SAN Designer 1.6 SAN Components Summary ====================================================== Servers: ====================================================== Server: 1 Server Group: TEST Server Count: 13 Server OS: Windows Server OS Version: Windows Server 2008 x64 Hyper-V Fabric Connection(s) for this Server: 2 ====================================================== Storage: ====================================================== Storage: 1 Storage Group: HP Storage Count: 1 Storage Model Name: HP StorageWorks 4400 Enterprise Virtual Array Fabric Connection(s) for this Storage: 4 ====================================================== Fabric: ====================================================== Fabric Vendor: B-Series Fabric Speed(in Gb): 8 Growth in Ports(in %): 20 Preference: Compare Availability: NSPoF2 The configurations for the input given are: Configuration for Cost optimization can be Switch Count: 2 Configuration for Performance optimization can be Switch Count: 2 ======================================================
HP Storage SAN Designer 1.6SAN Components
Summary======================================================Servers:======================================================Server:
1Server Group: TESTServer Count: 13Server OS: WindowsServer OS
Version: Windows Server 2008 x64 Hyper-VFabric Connection(s) for
this Server: 2
======================================================Storage:======================================================Storage:
1Storage Group: HPStorage Count: 1Storage Model Name: HP
StorageWorks 4400 Enterprise Virtual ArrayFabric Connection(s) for
this Storage: 4
Note: The switch count shown here is based on initial analysis
of therequirements;however the actual count of switches required
may varyin the processed report that you receive from HP after the
detailedrequirement analysis.
SAN Summary generated based on SAN Design Reference Guide62nd
Edition dated 2011-06-06.
