Test Results for Cisco Unified Communications System Release … · Cisco Unified Communications System Test for Japan CiscoUnifiedCommunicationsSystemTestforJapan,inturnisanadd-ontestingatthesolutionlevel,where

Test Results for Cisco Unified Communications System Release 11.1for JapanFirst Published: March 08, 2016

Last Modified: July 05, 2016

Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000 800 553-NETS (6387)Fax: 408 527-0883

© 2016 Cisco Systems, Inc. All rights reserved.

C O N T E N T S

C H A P T E R 1 Cisco Unified Communications System Test 1

Cisco Unified Communications System Test 1

Cisco Unified Communications System Test for Japan 2

Acronyms 3

C H A P T E R 2 Test Topology and Environment Matrix 11

Test Topology 12

Environment Matrix 13

Open Caveats 17

What's New? 18

C H A P T E R 3 Test Results Summary 23

Cisco TelePresence Video Communication Server 23

Cisco Unity Connection 65

Cisco IP Phone 79

Cisco Unified Survivable Remote Site Telephony 103

Cisco Jabber for iPhone and iPad 108

Cisco Jabber for Android 116

Cisco Jabber for Windows 120

Cisco Jabber for Mac 125

Cisco TelePresence Multipoint Control Unit 132

Cisco TelePresence Management Suite 135

Cisco TelePresence Conductor 138

Cisco TelePresence Server 140

Cisco Jabber Guest 148

Cisco Prime Collaboration 157

Cisco Prime Collaboration Analytics 157

Cisco Prime Collaboration Assurance 162

Test Results for Cisco Unified Communications System Release 11.1 for Japan iii

Cisco Prime Collaboration Provisioning 167

Related Documentation 182

Test Results for Cisco Unified Communications System Release 11.1 for Japaniv

Contents

C H A P T E R 1Cisco Unified Communications System Test

• Cisco Unified Communications System Test, page 1

• Cisco Unified Communications System Test for Japan, page 2

• Acronyms, page 3

Cisco Unified Communications System TestCisco Unified Communications System Test, an integral part of the Enterprise Voice Solution Managementis a program that validates and tests specified system-level solution for the various products and platforms inthe Cisco Unified Communications System.

Cisco Unified Communications System Test, the systems integration layer, ensures that the UnifiedCommunications components delivered across the various engineering teams, when combined, improves theUnified Communications System software quality. This is achieved by testing the different components.

The requirements for Cisco Unified Communications System Test is derived based on the following:

• Popular customer scenarios

• Input from various Business Units, fields and Cisco Services

The test bed architecture is built based on the Solution Reference Network Design (SRND), cross-section ofproduct deployment models etc. The different types of testing carried out as a part of Cisco UnifiedCommunications System Test are:

• Interoperability/Compatibility

• Functionality

• Availability/Reliability/Stability

• Performance/Scalability/Capacity

• Usability/Serviceability

• Special focus area - CAP (Customer Assurance Program)/Technical Assistance Center (TAC)

• Security

Test Results for Cisco Unified Communications System Release 11.1 for Japan 1

Cisco Unified Communications System Test for JapanCisco Unified Communications System Test for Japan, in turn is an add-on testing at the solution level, wherethe requirements gathered are specific to Japanese usage and market. The requirements are derived based onthe following:

• Customer found defects in selected UC products

• High priority cases that are covered by the Cisco Unified Communications System Test team

• Inputs from SE's and TAC team of Cisco Japan

The test execution is carried out on selected UC products, which affects the Japanese segment and that areprioritized by SE's of the Cisco Japan team. Japanese specific equivalents such as Japanese locale, ISDNSwitch type being NTT and JPNP for Numbering Plan are implemented.

The objective of Cisco Unified Communications System Test for Japan is to run a sub-set of system testingthat is not covered by Cisco Unified Communications System Test and implement equivalents with Japaneseenvironment such as Japanese OS, localized application, selected Cisco Compatible Products and third partyequipment.

In this Cisco Unified Communications System Test release for Japan, the following components are tested.

• Cisco IP Phones

• Cisco TelePresence Video Communication Server

• Cisco TelePresence Video Communication Server Expressway

• Cisco Jabber for iPhone and iPad

• Cisco Jabber for Android

• Cisco Jabber for Windows

• Cisco Jabber for Mac

• Cisco Unified Survivable Remote Site Telephony

• Cisco Unity Connection

• Cisco TelePresence Multipoint Control Unit

• Cisco TelePresence Management Suite

• Cisco TelePresence Conductor

• Cisco TelePresence Server

• Cisco Jabber Guest

• Cisco Prime Collaboration

Test Results for Cisco Unified Communications System Release 11.1 for Japan2

Cisco Unified Communications System TestCisco Unified Communications System Test for Japan

AcronymsDescriptionAcronym

Advanced Audio Coding - Low DelayAAC-LD

Automated Alternate RoutingAAR

Automatic Call DistributionACD

Alternate Contact NumberACN

Active DirectoryAD

Automatic Gain ControlAGC

Audible Message Waiting IndicatorAMWI

Alternate Network Address TranslationANAT

Adaptive Security ApplianceASA

American Standard Code for Information InterchangeASCII

Analog Telephone AdapterATA

Bulk Administration ToolBAT

Binary Floor Control ProtocolBFCP

Busy Lamp FieldBLF

Certificate AuthorityCA

CDR Analysis and ReportingCAR

Channel Associated SignalingCAS

Call Control DiscoveryCCD

Cisco Desktop AdministratorCDA

Cisco Discovery ProtocolCDP

Call Detail RecordCDR

Caller Entered DigitsCED

Call Forward AllCFA

Call Forward BusyCFB

Call Forward No AnswerCFNA

Call Forward UnregisteredCFUR

Cisco Jabber for AndroidCJA

Cisco Jabber for iPhoneCJI

Cisco Jabber for MacCJM


Cisco Unified Communications System TestAcronyms

DescriptionAcronym

Cisco Jabber for iPadCJIPad

Cisco Jabber for WindowsCJW

Command Line InterfaceCLI

Calling Line IdentificationCLID

Client Matter CodeCMC

Call Management RecordCMR

Cross-Origin Resource SharingCORS

Clustering over WANCoW

Cisco Prime CollaborationCPC

Client Services FrameworkCSF

Cross Site Request ForgeryCSRF

Calling Search SpaceCSS

Computer Telephony InterfaceCTI

Computer Telephony IntegrationCTI

Certificate Trust ListCTL

Cisco Unified Border ElementCUBE

Cisco Unity ConnectionCUC

Cisco Unified Communications ManagerCUCM

Cisco Unified PresenceCUP

Cisco Unified Customer Voice PortalCVP

Cisco WebEx Meetings ServerCWMS

Directed Call ParkDCP

Device and Credential RepositoryDCR

Dynamic Host Configuration ProtocolDHCP

Direct In-Ward DialingDID

Directory NumberDN

Dialed Number AnalyzerDNA

Do Not DisturbDND

Domain Name ServerDNS

Delayed OfferDO

Digital Private Network Signaling SystemDPNSS



DescriptionAcronym

Disaster Recovery SystemDRS

Differentiated Services Code PointDSCP

Device Work CenterDWC

Elliptical Curve Digital Signature AlgorithmECDSA

Extended Display Identification DataEDID

Emergency Location Identification NumberELIN

Enterprise License ManagerELM

Extension MobilityEM

Extension Mobility Cross ClusterEMCC

Early OfferEO

Cisco Enhanced Survivable Remote Site TelephonyE-SRST

Forced Authorization CodeFAC

Federal Information Processing StandardsFIPS

Fully Qualified Domain NameFQDN

Foreign Exchange OfficeFXO

Foreign Exchange StationFXS

Graphical User InterfaceGUI

GatewayGW

High AvailabilityHA

High DefinitionHD

Historical ReportingHR

Hyper Text Markup LanguageHTML

Hypertext Transfer ProtocolHTTP

Hypertext Transfer Protocol SecureHTTPS

Inter Cluster TrunkICT

Identity ProviderIdP

Instant MessagingIM

IP Phone MessengerIPPM

IP Service Level AgreementsIPSLA

Integrated Services Digital NetworkISDN

Indian Standard TimeIST



DescriptionAcronym

Initial Trust ListITL

Interactive Voice ResponseIVR

Joint Photographic Experts GroupJPEG

Key Expansion ModuleKEM

Log Collection CenterLCC

Lightweight Directory Access ProtocolLDAP

Light Emitting DiodeLED

Media Convergence ServerMCS

Multipoint Control UnitMCU

MultiDimensional eXpressionsMDX

Managed File TransferMFT

Media Gateway Control ProtocolMGCP

Multilevel Precedence and PreemptionMLPP

Music On HoldMOH

Mobile and Remote AccessMRA

Media Resource Group ListMRGL

Managed Service ProviderMSP

Maximum Transmission UnitMTU

Message Waiting IndicatorMWI

Network Interface and Configuration EngineNICE

Non Linear ProcessingNLP

New Technology LAN Manager version 2NTLMv2

Network Time ProtocolNTP

One Button To PushOBTP

Operations ManagerOM

On Screen DisplayOSD

Peer-to-PeerP2P

Product Authorization KeyPAK

Personal Communication AssistantPCA

Prime Collaboration DeploymentPCD

PC over IPPCoIP



DescriptionAcronym

Personal Identification NumberPIN

Picture in PicturePIP

Personal MultipartyPMP

Plain Old Telephony SystemPOTS

Primary Rate InterfacePRI

Provisioning Northbound InterfaceProvisioning - NBI

Problem Reporting ToolPRT

Public Switched Telephone NetworkPSTN

Quality Report ToolQRT

Q-Signaling protocolQSIG

Remote Desktop ProtocolRDP

Really Simple SyndicationRSS

Real Time Control ProtocolRTCP

Real Time Monitoring ToolRTMT

Realtime Transport ProtocolRTP

Security Assertion Markup LanguageSAML

Skinny Client Control ProtocolSCCP

Severely Conceal Seconds RatioSCSR

Standard DefinitionSD

Selsius Ethernet PhoneSEP

Secure File Transfer ProtocolSFTP

Session Initiation ProtocolSIP

Small and Midsize BusinessSMB

Shared MultipartySMP

Simple Network Management ProtocolSNMP

Cisco Unified Survivable Remote Site TelephonySRST

Secure ShellSSH

Secure Socket LayerSSL

Single Sign OnSSO

Technical Assistant CenterTAC

Transmission Control ProtocolTCP



DescriptionAcronym

Transport Layer SecurityTLS

TelePresence Management SuiteTMS

TelePresence Management Suite Provisioning ExtensionTMSPE

Time of Day RoutingTODR

Trust Relay PointTRP

TelePresence ServerTS

Telephony User InterfaceTUI

Unified Computing SystemUCS

User Datagram ProtocolUDP

User Data ServicesUDS

Unified Messaging GatewayUMG

Cisco Unified Communications ManagerUnified CM

Uniform Resource IdentifierURI

Coordinated Universal TimeUTC

Cisco TelePresence Video Communication ServerVCS

VCS ExpresswayVCS-E

VCS ControlVCS-C

Voice GatewayVGW

Virtual MachineVM

Voice Mail NotificationVMN

View Mail for OutlookVMO

Voice over IPVoIP

Voice Profile for Instant MessagingVPIM

Virtual Private NetworkVPN

Video SLA Assessment AgentVSAA

TelePresence Server on VMVTS

Wide Area NetworkWAN

Wireless FidelityWi-Fi

Extensive Application Programming InterfacexAPI

Extensible Markup LanguageXML

Extensible Messaging and Presence ProtocolXMPP







C H A P T E R 2Test Topology and Environment Matrix

• Test Topology, page 12

• Environment Matrix, page 13

• Open Caveats, page 17

• What's New?, page 18


Test TopologyFigure 1: Topology in Use


Test Topology and Environment MatrixTest Topology

Environment MatrixVersionComponentApplications

11.0.1.22028-1VersionCisco UnifiedCommunicationsManager

Call Control

11.0.1.1000-1Locale

3-1-9.JPDial Plan

11VersionCisco Unified SurvivableRemote Site Telephony(SRST) 15.6.1 T1IOS

11.0.1VersionCisco Unified SRSTManager

11VersionCisco UnifiedCommunication ManagerExpress

X8.7.1VersionCisco TelePresence VideoCommunication Server(VCS) vcs-lang-ja-jp_8.5-1_amd64.tlpLocale

X8.7.1VersionCisco TelePresence VideoCommunication ServerExpressway (VCSExpressway)

vcs-lang-ja-jp_8.5-1_amd64.tlpLocale

X8.7.1VersionCisco Telepresence VideoCommunication ServerExpressway on VM vcs-lang-ja-jp_8.5-1_amd64.tlpLocale

11.0.1.10000-6VersionCisco UnifiedCommunicationsManagerIM and Presence Service

Applications

11.0.1.1000-1Locale

11.0.1.22028-1VersionCisco Unity ConnectionVoice Mail andUnified Messaging

11.0.0.1-1Locale

11.1.0.408VersionCisco Prime CollaborationProvisioning

NetworkManagement

11.1.0.66573VersionCisco Prime CollaborationAssurance & Analytics


Test Topology and Environment MatrixEnvironment Matrix

VersionComponentApplications

11-0-1-11Cisco IP Phone7811/21/41/61

End Point

11-0-1-11devDEV BuildCisco IP Phone7811/21/41/61

11-0-1-11Cisco IP Phone8811/41/45/51/61/65

11-0-1-11devDEV BuildCisco IP Phone8811/41/45/51/61/65

9-4-2SR2-2Cisco Unified IP Phone8941/8945 /8961

9-4-2SR2-2Cisco Unified IP Phone9951/9971

9-2-3-1Cisco ATA 190 AnalogTelephone Adaptor

10.2.5.154Cisco DesktopCollaboration ExperienceDX650

TC7.3.6 Beta 1EX60 - Cisco TelePresenceSystem EX60

TC7.3.6 Beta 1EX90 - Cisco TelePresenceSystem EX90

CE 8.1SX20 - Cisco TelePresenceSX20 Quick Set

CE 8.1SX80 - Cisco TelePresenceSX80 Codec

CE 8.1SX10 - Cisco TelePresenceSX10 Quick Set

TC 7.3.6 Beta 1C90 - Cisco TelePresenceSystem Integrator PackageC90

TX6.1.10(7)500-32 - CiscoTelePresence System 500(32)

TX6.1.10(7)TX9000 - CiscoTelePresenceSystem TX9000

CE 8.1MX200-G2 - CiscoTelePresence MX200-G2

CE 8.1




MX300-G2 - CiscoTelePresence MX300-G2

10.2.5.154DX70-Cisco DX70

10.2.5.154DX80-Cisco DX80

15.6.1 T1IOSISR Gateways(3945e/3925e/3945/2921)

CommunicationsInfrastructure

3.16.2SIOSISR 4451-X

15.6.1 T1Cisco Unified BorderElement for ISR

3.3.5SECisco 3650 PoE Switch

15.0.2-SE 5Cisco 3750 PoE Switch

ESXi 5.5.0vCenter Server

5.2(2 a)M9500MDS Switch

15.1VersionCisco TelePresenceManagement Suite - TMS

TelePresence

4.5 (1.72)VersionMCU4510& 5310 - CiscoTelePresence MCU

MCU_4-3_UI_and_audio_JPN.packageLocale

4.2(4.23)VersionCisco TelePresence Server

XC4.1VersionCisco TelePresenceConductor

4.2(4.23)VersionCisco TelePresence Server7010

15.3VersionWireless Access Point1142

Wireless andMobility




11.6.0.230297VersionCisco Jabber for MacMessagingApplications

11.6.0.30146VersionCisco Jabber for Windows

11.5.1(229222) - 32 bit (iPhone5 andiPad)

VersionCisco Jabber for iOS

11.5.1(229222) - 64 bit (iPhone6 andiPad Air)

Apple iOS 9.2 (13C75)iPhone 5

Apple iOS 9.2 (13C75)iPhone 6

Apple iOS 9.2 (13C75)iPad

Apple iOS 9.2 (13C75)iPad Air

11.6(230696)VersionCisco Jabber for Android

Android OS 5.0.1Galaxy S4

Android OS 5.0.2Xperia Z1

Android OS 4.4.4Xperia Z3

Android OS 5.0.2Xperia Z3+

Android OS 5.1.1Sony Tab

Android OS 4.4W.2Sony Watch

2.1(2a)Cisco UCS6140

Fabric InterconnectPRIMARY

UCS


Fabric InterconnectSUBORDINATE


Fabric Cluster

ESXi 5.1.0, 5.5.0, 6.0B-Series ServerESXi Host

ESXi 5.1.0, 5.5.0, 6.0C-Series Server




Windows 7-SP1 (Japanese)Windows 7-SP1Operating SystemClient

Windows 8/8.1 (Japanese)Windows 8/8.1

Windows 10 (Japanese)Windows 10

10.10.5Mac Book Pro

IE 10, 11 (Supported Japanese language)IEBrowser

Firefox 44.0, Firefox ESR 31, 38(Supported Japanese language)

Mozilla

Chrome 43 or later (Supported Japaneselanguage)

Chrome

Windows Server 2008 (R2 Enterprise -Japanese)

MicrosoftWindows ServerServer

Windows Server 2012 (R2 Enterprise -Japanese)

2013 SP1Microsoft Exchange Server

2.5.1.28.BCisco WebEx MeetingsServer

11.0.1.10000-103Cisco MediaSense

10.6.10Cisco Jabber Guest Server

Open CaveatsTitleDefect ID

Cisco Unity Connection

Self-view video is not working in 8945 while playing video greetingsCSCuy37938

Cisco TelePresence Video Communication Server

Resume is not working in Cisco DX650 using the Hard keyCSCuy17753

Touch UI gets restarted when we select the blank option in SX10CSCuy17439

Call placed on Hold is not displaying in SX20 Quick SetCSCuy00794

Call is not ended when the receiver is been placed down in Cisco DX650CSCuy09214

Far end information is not displayed in SX80 Codec when in a callCSCuy19468

Incoming call cannot be declined using End key in Cisco DX650CSCuy09015


Test Topology and Environment MatrixOpen Caveats

What's New?Cisco VCS Clustering

Cisco VCS can be deployed either as a standalone instance or as a cluster of up to six VCS nodes (VCS peers).Each VCS node in a cluster must have the same capacity. For example, if deployed as a virtual application,each VCS node must use the same OVA template. These rules apply to VCS Control and VCS Expressway(and also to Expressway C and Expressway E). Furthermore, all VCS peers in a VCS cluster must be of thesame type. For example, a VCS Expressway node and a VCS Control node cannot be deployed as part of thesame VCS cluster.

If the endpoint loses connection with the first VCS peer it registered with, it will select another peer from theAlternate Gatekeepers list and try to re-register with that VCS.

Domain Name Server (DNS) Records can be used to provide redundancy. SIP or H.323 endpoints may leveragea DNS server to find the IP address of another VCS node with which to attempt registration if initial registrationfailed with the previous node. Relying on DNS for registration redundancy does introduce some delay becauseendpoints must wait some period of time after sending an initial registration request before sending a newregistration request to another VCS node.

Visual Voicemail in CE

The Visual Voicemail application is an alternative to audio, or telephone user interface (TUI), Voicemailservice that we have tested in Collaboration Edge (CE). We use the screen on the phone to work with voicemessages. User can view a list of voice messages and play the messages from the list via CE. User can alsocompose, reply to, forward, and delete messages in CE environment. Visual Voicemail requires Cisco UnifiedCommunications Manager (CUCM) integrated with Unity Connection 7.0 or later.

CME SRST

SRST Fallback Mode Using Cisco Unified CME enables routers to provide call-handling support for CiscoUnified IP phones if they lose connection to remote primary, secondary, or tertiary Cisco UnifiedCommunications Manager installations or if the WAN connection is down. When Cisco Unified SRSTfunctionality is provided by Cisco Unified CME, provisioning of phones is automatic and most Cisco UnifiedCME features are available to the phones during periods of fallback.

Cisco Prime Collaboration Provisioning 11.1

Quick Service Provisioning for Existing Users

Provisions initial or additional services for a user already defined in Prime Collaboration Provisioning, withoutusing the ordering wizard that involves multiple steps to order a service. An Add-on Service (if applicable)for quick provisioning in the Service Details pane on the User Provisioning page.

Service Template Assignment Enhancement

In the User Role setup page, Service Template Assignment table is added with a new Endpoint Model column.The new column enables different phone models to be defined with their default templates, so that the quickprovisioning function can use this setup to automatically choose the template.


Test Topology and Environment MatrixWhat's New?

Batch Provisioning Support Enhancement

The existing Batch Provisioning feature now supports the following new attributes:

• Geolocation

• Geolocation Filter

• Run on All Active Unified CM Nodes

• Incoming Called Party Unknown Use Device Pool CSS

SMTP Notification Setting on Cisco Unity Connections

You can provision SMTP Notification device settings for users in Cisco Unity Connection through batch.This feature allows users in Cisco Unity Connection to add, modify, or remove SMTP Notification device.

Process Management

Using process management you can restart services such as Apache, WildFly, PostgreSQL, and NICE fromthe user interface. You also have option to reboot linux server and restart Cisco Prime CollaborationProvisioning application. You can also knowwhen and who restarted the service from the restart history table.

Scheduled Synchronization

The Scheduled Synchronization command-line script utility is nowmigrated to user interface. Using schedulesynchronization, you can schedule periodic processor and domain synchronization. In addition, you can editand delete existing synchronization jobs and view details such as the job status, synchronization status, andso on. After upgrade, all cron jobs (scheduled for synchronization) are migrated as synchronization jobs tothe Schedule Synchronization page.

SSL Certificate Enhancements

In Cisco Prime Collaboration Provisioning, you can generate, download, and view the certificates throughthe user interface. You can also upload provisioning and LDAP certificates.

Monitoring the NICE Server

A NICE Restart check box is provided under Administration > System Notification Settings for emailnotification about NICE restart. You can also verify NICE status through Administration > ProcessManagement.

Test Coverage:

New FeaturesComponents

Product RebrandingCisco VCS

Virtual Machine

Serviceability/Operational Enhancement



1080p presentation locally and in call (SX10)CE 8

Support for OSD active mode (SX20)

Warning on screen regarding Touch 8" and TRC-5 (SX20)

Support for WUXGA(SX80)

MultiStream Conferencing (Hybrid)

Full Cisco Proximity support

SX80 Bandwidth Reduction

Touch UI Updates

Minor New Features:

List of discontinuations in CE8.0.0 from TC7.3.x

New Microphone LED behaviour

Setup Assistant requires authentication

API changes

Remote monitoring (web snapshots)

UI changes in active mode

Access to call statisticsDX Series

Contacts search

HDMI Audio

SIP URI

Stay in PC mode

USB Redirect

Use the System While an Outgoing Call is Ringing

Alternate Phone Book Server

Automatic Problem Report Upload

FIPS mode

JG Mobile Cross-Launch parameters improvementJabber Guest

VMWare ESXi 6.0 Support

Improvement to handle accident call disconnect

JG mobile UI alignment



New Email TemplateCisco TMS

Meeting Information Page

Added Location Information Field

Dial-in Number Allocation

Active Meeting Manager

Multiple Protocol Support for Call-in Participants

Support for Active Meeting ManagerCisco TelePresence Conductor

New page under Conference configuration

Usage reporting and statistics collection

SIP Domain Override Settings





C H A P T E R 3Test Results Summary

• Cisco TelePresence Video Communication Server, page 23

• Cisco Unity Connection, page 65

• Cisco IP Phone, page 79

• Cisco Unified Survivable Remote Site Telephony, page 103

• Cisco Jabber for iPhone and iPad, page 108

• Cisco Jabber for Android, page 116

• Cisco Jabber for Windows, page 120

• Cisco Jabber for Mac, page 125

• Cisco TelePresence Multipoint Control Unit, page 132

• Cisco TelePresence Management Suite, page 135

• Cisco TelePresence Conductor, page 138

• Cisco TelePresence Server, page 140

• Cisco Jabber Guest, page 148

• Cisco Prime Collaboration, page 157

• Related Documentation, page 182

Cisco TelePresence Video Communication ServerDefectsStatusCall Component FlowDescriptionTitleLogical ID


PassedNAVerify whether'CloudExtension' isrenamed as'HybridServices' underApplicationmenu in CiscoTelePresenceVideoCommunicationServer

'CloudExtension' isrenamed as'HybridServices'

UCJ11.1S.VCS.G.001

PassedNAVerify whetherCiscoTelePresenceVideoCommunicationServer is namedas"Expressway/VCSBase" beforeactivating theapplication witha release key

Expressway/VCSBase whensystem is inpre-activationstate

UCJ11.1S.VCS.G.002

PassedNAVerify whether'Filter ByKeyword' isadded for SyslogOutput in CiscoTelePresenceVideoCommunicationServer underMaintenance ->Logging

Keyword filteris added forsyslog output

UCJ11.1S.VCS.G.003

PassedNAVerify whetherCiscoTelePresenceVideoCommunicationServer can bedeployed onVMWare ESXi6.0

Deploy CiscoVCS onVMWare ESXi6.0

UCJ11.1S.VCS.G.004


Test Results SummaryCisco TelePresence Video Communication Server

PassedSX10 Quick Set->CiscoVCS->SipTrunk->UnifiedCM->Jabber for Android

Verify whetherthe user canmake call fromCiscoTelePresenceSX10 Quick Setwhich isregistered withCiscoTelePresenceVideoCommunicationServer to CiscoJabber forAndroid whichis registeredwith CiscoUnifiedCommunicationsManager

Making callfrom SX10Quick Set whichis registeredwith Cisco VCSto Jabber forAndroid whichis registeredwith UnifiedCM

UCJ11.1S.VCS.G.005

PassedSX20 Quick Set (Hold)->Cisco VCS->Sip Trunk->Unified CM->Jabber forAndroid

Verify whetherthe user can holdthe call fromCiscoTelePresenceSX20 Quick Setwhich isregistered withCiscoTelePresenceVideoCommunicationServer to CiscoJabber forAndroid whichis registeredwith CiscoUnifiedCommunicationsManager

Hold the call inSX20 Quick Setregistered withCisco VCSwhile in a callwith Jabber forAndroidregistered withUnified CM

UCJ11.1S.VCS.G.006



PassedSX20Quick Set->UnifiedCM->Jabber for Android

Verify whetherthe user canmake call fromCiscoTelePresenceSX20 Quick Setto Cisco Jabberfor Android bothregistered inCisco UnifiedCommunicationsManager

Making callfrom SX20Quick Set whichis registeredwith UnifiedCM to Jabberfor Androidwhich isregistered withUnified CM

UCJ11.1S.VCS.G.007

PassedJabber forAndroid(Hold)-> UnifiedCM->SX10 Quick Set

Verify whetherthe user can holdthe call fromCisco Jabber forAndroid toCiscoTelePresenceSX10 Quick Setboth registeredin Cisco UnifiedCommunicationsManager

Hold the call inJabber forAndroid whichis in call withSX10 Quick Set

UCJ11.1S.VCS.G.008

PassedSX10Quick Set->UnifiedCM ->Jabber for Android

Verify whetherthe user can endthe call fromCiscoTelePresenceSX10 Quick Setto Cisco Jabberfor Android,both registeredin Cisco UnifiedCommunicationsManager

End the callfrom SX10Quick Set toJabber forAndroid whichis registeredwith UnifiedCM

UCJ11.1S.VCS.G.009

PassedSX10 QuickSet(Hold)->UnifiedCM->Jabber for Android

Verify whetherthe user can holdthe call fromCiscoTelePresenceSX10 Quick Setto Cisco Jabberfor Android bothregistered withCisco UnifiedCommunicationsManager

Hold the call inSX10 Quick Setwhich is in callwith Jabber forAndroid whichis registeredwith UnifiedCM

UCJ11.1S.VCS.G.010



PassedJabber forAndroid(Hold)-> UnifiedCM->Sip Trunk->CiscoVCS->SX10 Quick Set

Verify whetherthe user can holdthe call fromCisco Jabber forAndroid whichis registeredwith CiscoUnifiedCommunicationsManager toCiscoTelePresenceSX10 Quick Setwhich isregistered withCiscoTelePresenceVideoCommunicationServer

Hold the call inJabber forAndroid whichis registeredwith UnifiedCM which is incall with SX10Quick Set whichis registeredwith Cisco VCS

UCJ11.1S.VCS.G.011

PassedJabber forAndroid->UnifiedCM->SX20 Quick Set

Verify whetherthe user can endthe call fromCisco Jabber forAndroid toCiscoTelePresenceSX20 Quick Setboth registeredwith CiscoUnifiedCommunicationsManager

End the callfrom Jabber forAndroid toSX20 Quick Setwhich isregistered withUnified CM

UCJ11.1S.VCS.G.012

PassedSX10 QuickSet(Mute)->UnifiedCM->Jabber for Android

Verify whetherthe user canmute the callfrom CiscoTelePresenceSX10 Quick Setto Cisco Jabberfor Android bothregistered withCisco UnifiedCommunicationsManager

Mute the callfrom SX10Quick Set toJabber forAndroid whichis registeredwith UnifiedCM

UCJ11.1S.VCS.G.013



PassedSX20Quick Set->UnifiedCM->Jabber forAndroid->Add->UnifiedCM->SX10 Quick Set

Verify whetherthe user can addCiscoTelePresenceSX10 Quick Setas newparticipant to theexisting callfrom CiscoTelePresenceSX20 Quick Setwhich is in a callwith CiscoJabber forAndroid, all areregistered withCisco UnifiedCommunicationsManager

Addingparticipant to thecall from SX20Quick Set whichis registeredwith UnifiedCM

UCJ11.1S.VCS.G.014

PassedSX80 Codec ->CiscoVCS-> EX90 -> HoldSX80 Codec -> CiscoVCS -> SX10 Quick Set-> Hold SX80 Codec ->Cisco VCS-> EX90 ->Swap

Verify whetherthe call withCiscoTelePresenceSX10 Quick Setand the call withCiscoTelePresenceSystem EX90 isswappedsuccessfully inCiscoTelePresenceSX80 Codec, allare registeredwith CiscoTelePresenceVideoCommunicationServer

Swap betweentwo calls inSX80 Codecregistered CiscoVCS

UCJ11.1S.VCS.G.015



PassedSX80 Codec -> UnifiedCM ->Jabber forWindows

Verify whetherthe user canmake call fromCiscoTelePresenceSX80 Codec toCisco Jabber forWindows bothregistered withCisco UnifiedCommunicationsManager

Making callfrom SX80Codec which isregistered withUnified CM toJabber forWindows,whichis registeredwith UnifiedCM.

UCJ11.1S.VCS.G.016

PassedSX80 Codec -> UnifiedCM ->Jabber for Mac

Verify whetherthe user canmake call fromCiscoTelePresenceSX80 Codec toCisco Jabber forMac bothregistered withCisco UnifiedCommunicationsManager

Making callfrom SX80Codec to Jabberfor Mac

UCJ11.1S.VCS.G.017

PassedSX80Codec (PresentationSharing) -> Unified CMcluster 1 -> Sip Trunk ->Unified CM cluster 2 ->DX80(line 2)

Verify whetherpresentation canbe shared fromCiscoTelePresenceSX80 Codecregistered inCisco UnifiedCommunicationsManager cluster1 to line 2 ofCisco DX80registered withCisco UnifiedCommunicationsManager cluster2 workssuccessfully

PresentationSharing in ainter-cluster callfrom SX80Codec to line 2of DX80

UCJ11.1S.VCS.G.018



PassedSX80 Codec -> UnifiedCM -> EX90

Verify whetherthe call isestablished fromCiscoTelePresenceSX80 Codec toCiscoTelePresenceSystemEX90 bychanging thedefault MTUsize value in theCiscoTelePresenceSX80 Codec

Make a callfrom SX80Codec to EX90by changing theDefault MTUsize value

UCJ11.1S.VCS.G.019

PassedSX80 Codec -> UnifiedCM ->Jabber for iPad

Verify whetherthe user canmake call fromCiscoTelePresenceSX80 Codec toCisco Jabber foriPad bothregistered withCisco UnifiedCommunicationsManager

Making callfrom SX80Codec which isregistered withUnified CM toJabber for iPad,which isregistered withUnified CM.

UCJ11.1S.VCS.G.020

PassedSX80Codec (Presentationsharing )-> Unified CM->MX200-G2 (CFA) ->Unified CM -> SX10Quick Set

Verify whetherthe presentationis shared fromCiscoTelePresenceSX80 Codec toCiscoTelePresenceSX10 Quick Setwhen call isforwarded fromCiscoTelePresenceMX200-G2 toCiscoTelePresenceSX10 Quick Setall are registeredwith CiscoUnifiedCommunicationsManager

Presentationsharing in SX80Codec to SX10Quick Setregistered withUnified CM OnCall ForwardAll fromMX200-G2 toSX10 Quick Set

UCJ11.1S.VCS.G.021



PassedEX60(Hold/Resume) ->Unified CM -> DX650

Verify whetherHold/Resume avideo call fromCiscoTelePresenceSystem EX60 toCisco DX650both registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Hold/Resume avideo call fromEX60 to DX650registered withUnified CM

UCJ11.1S.VCS.G.022

PassedDX650 -> Unified CM ->EX60

Verify whetheraudio call fromCisco DX650 toCiscoTelePresenceSystem EX60both registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Audio call toEX60 fromDX650registered inUnified CM

UCJ11.1S.VCS.G.023

PassedEX60(Hold/Resume ) ->Unified CM -> DX650

Verify whetherHold/Resumeaudio call fromCiscoTelePresenceSystem EX60 toCisco DX650both registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Hold/Resumeaudio call inEX60 to DX650registered inUnified CM

UCJ11.1S.VCS.G.024



PassedEX60(PresentationSharing) -> Unified CM-> DX650 (line 2)

Verify whetherpresentation canbe shared fromCiscoTelePresenceSystem EX60 toline 2 of CiscoDX650 bothregistered withCisco UnifiedCommunicationsManager workssuccessfully

Presentationsharing fromEX60 to line 2of DX650registered inUnified CM

UCJ11.1S.VCS.G.025

PassedEX60(PresentationSharing) -> Cisco VCS ->Sip Trunk -> Unified CM-> DX650 (line 2)

Verify whetherpresentation canbe shared fromCiscoTelePresenceSysem EX60registered inCiscoTelePresenceVideoCommunicationServer to line 2of Cisco DX650registered withCisco UnifiedCommunicationsManager workssuccessfully

Presentationsharing fromEX60 registeredin Cisco VCS toline 2 of DX650registered inUnified CM

UCJ11.1S.VCS.G.026

PassedEX60(PresentationSharing) -> Unified CMcluster 1 -> Sip Trunk ->Unified CM cluster 2 ->DX650(line 2)

Verify whetherpresentation canbe shared fromCiscoTelePresenceSystem EX60registered withCisco UnifiedCommunicationsManager cluster1 to line 2 ofCisco DX650registered withCisco UnifiedCommunicationsManager cluster2 workssuccessfully

PresentationSharing in aintercluster callfrom EX60 toline 2 of DX650

UCJ11.1S.VCS.G.027



PassedEX60(PresentationSharing) -> Unified CM-> DX650

Verify whetherpresentation canbe shared fromCiscoTelePresenceSystem EX60 toCisco DX650both registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Presentationsharing fromEX60 to DX650registered inUnified CM

UCJ11.1S.VCS.G.028

PassedEX60(PresentationSharing) -> Cisco VCS ->Sip Trunk -> Unified CM-> DX650

Verify whetherpresentation canbe shared fromCiscoTelePresenceSystem EX60registered inCiscoTelePresenceVideoCommunicationServer to CiscoDX650registered withCisco UnifiedCommunicationsManager workssuccessfully

Presentationsharing fromEX60 registeredin Cisco VCS toDX650registered inUnified CM

UCJ11.1S.VCS.G.029

PassedEX60(PresentationSharing) -> Unified CMcluster 1 -> Sip Trunk ->Unified CM cluster 2 ->DX650

Verify whetherpresentation canbe shared fromCiscoTelePresenceSystem EX60registered withCisco UnifiedCommunicationsManager cluster1 to CiscoDX650registered withCisco UnifiedCommunicationsManager cluster2 workssuccessfully

PresentationSharing in aintercluster callfrom EX60 toDX650

UCJ11.1S.VCS.G.030



PassedEX60(Hold/Resume) ->Cisco VCS -> Sip Trunk-> Unified CM -> DX650

Verify whetherHold/Resume avideo call fromCiscoTelePresenceSystem EX60registered withCiscoTelePresenceVideoCommunicationServer to CiscoDX650registered withCisco UnifiedCommunicationsManager workssuccessfully

Hold/Resume avideo call fromEX60 registeredwith Cisco VCSto DX650registered withUnified CM

UCJ11.1S.VCS.G.031

PassedEX60 (PresentationSharing )(Hold /Resume)-> Cisco VCS ->Sip trunk ->Unified CM->DX650

Verify whetherHold / Resumeworkssuccessfullyafter thepresentation isshared fromCiscoTelePresenceSystem EX60registered inCiscoTelePresenceVideoCommunicationServer to CiscoDX650registered inCisco UnifiedCommunicationsManager

Hold / Resume avideo call afterthe presentationis shared fromEX60 registeredin Cisco VCS toDX650

UCJ11.1S.VCS.G.032



PassedEX60 (logged in as EMuser)->Unified CM->DX650

Verify whethervideo call fromCiscoTelePresenceSystemEX60 bylogging asExtensionMobility user toCisco DX650,both registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Make a Videocall from EX60by logging asEM user toDX650 bothregistered inUnified CM

UCJ11.1S.VCS.G.033

PassedEX60 (logged in as EMuser)->Unified CM -DX650 (line 2)

Verify whethervideo call fromCiscoTelePresenceSystemEX60 bylogging asExtensionMobility user toline 2 of CiscoDX650, bothregistered withCisco UnifiedCommunicationsManager workssuccessfully

Make a Videocall from EX60by logging asEM user to line2 of DX650both registeredin Unified CM

UCJ11.1S.VCS.G.034

PassedEX60 (logged in as EMuser)( Hold/Resume)->Unified CM -> DX650

Verify whetherHold/Resume avideo call fromCiscoTelePresenceSystemEX60 bylogging asExtensionMobility user toCisco DX650both registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Hold/Resume avideo call fromEX60 bylogging as EMuser to DX650registered withUnified CM

UCJ11.1S.VCS.G.035



PassedEX60( logged in as EMuser) ->Unified CM->DX650 -> Call ForwardAll -> Unified CM ->EX90

Verify whetherthe call madefrom CiscoTelePresenceSystem EX60which is loggedin as ExtensionMobility user isforwarded toCiscoTelePresenceSystem EX90when CiscoDX650 has setcall forward allto CiscoTelePresenceSystem EX90,all are registeredin Cisco UnifiedCommunicationsManager

Make call fromEX60 bylogging as EMuser to DX650which has setCall ForwardAll to EX90

UCJ11.1S.VCS.G.036

PassedEX60(logged in as EMuser)(PresentationSharing)-> Unified CM ->DX650

Verify whetherpresentation canbe shared fromCiscoTelePresenceSystemEX60 byloggingExtensionMobility user toCisco DX650both registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Presentationsharing fromEX60 bylogging as EMuser to DX650registered inUnified CM

UCJ11.1S.VCS.G.037



PassedEX90 (logged in as EMuser)->Unified CM ->DX650 EX90 (logged inas EM user) -> add->Unified CM -> EX60

Verify whetherMultisiteconferencingfrom CiscoTelePresenceSystemEX90 bylogging asExtensionMobility userwith CiscoDX650 andCiscoTelePresenceSystem EX60,all registered inCisco UnifiedCommunicationsManager workssuccessfully

MultisiteConferencingfrom EX90 bylogging as EMuser to DX650and EX60registered inUnified CM

UCJ11.1S.VCS.G.038

PassedEX90 (logged in as EMuser)->Unified CM ->DX650 ( line 2) EX90(logged in as EM user) ->Add-> Unified CM ->EX60

Verify whetherMultisiteconferencingfrom CiscoTelePresenceSystemEX90 bylogging asExtensionMobility userwith line 2 ofCisco DX650and CiscoTelePresenceSystemEX60,allregistered inCisco UnifiedCommunicationsManager workssuccessfully

MultisiteConferencingfrom EX90 bylogging as EMuser to Line 2 ofDX650 andEX60 registeredin Unified CM

UCJ11.1S.VCS.G.039



PassedEX90 (logged in as EMuser)(PresentationSharing)->Unified CM ->DX650 EX90 (logged inas EM user) -> add->Unified CM -> EX60

Verify whetherpresentationsharing inMultisiteconferencingfrom CiscoTelePresenceSystem EX90 toCisco DX650and CiscoTelePresenceSystem EX60,all registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

PresentationSharing inMultisiteConferencingfrom EX90 bylogging as EMuser withDX650 andEX60 registeredin Unified CM

UCJ11.1S.VCS.G.040

PassedEX90 (logged in as EMuser)(PresentationSharing) ->Unified CM ->DX650 ( line 2)EX90(logged in as EM user) ->add-> Unified CM ->EX60

Verify whetherPresentationSharing inMultisiteConferencingfrom CiscoTelePresenceSystem EX90byloggingExtensionMobility userwith line 2 ofCisco DX650andCiscoTelePresenceSystem EX60,all registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

PresentationSharing inMultisiteConferencingfrom EX90 bylogging as EMuser with Line 2of DX650 andEX60 registeredin Unified CM

UCJ11.1S.VCS.G.041



PassedEX90(logged in as EMuser)(PresentationSharing)-> Unified CMcluster 1 -> Sip Trunk ->Unified CM cluster 2->DX650 (line 2)

Verify whetherpresentation canbe shared fromCiscoTelePresenceSystemEX90 bylogging asExtensionMobility userregistered withCisco UnifiedCommunicationsManager cluster1 to line 2 ofCisco DX650registered withCisco UnifiedCommunicationsManager cluster2 workssuccessfully

Presentationsharing inInter-clustervideo call fromEX90 bylogging as EMuser to line 2 ofDX650 bothregistered inUnified CM

UCJ11.1S.VCS.G.042

PassedEX90 (logged in as EMuser)(Hold/Resume)->UnifiedCM -> DX650 ( line2)EX90 (logged in as EMuser) -> add-> UnifiedCM -> EX60

Verify whetherHold/Resume inMultisiteconferencingfrom CiscoTelePresenceSystemEX90 bylogging asExtensionMobility userwith line 2 ofCisco DX650and CiscoTelePresenceSystem EX60,all registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Hold/Resume inMultisiteConferencingfrom EX90 bylogging as EMuser with Line 2of DX650 andEX60 registeredin Unified CM

UCJ11.1S.VCS.G.043



PassedSX20 Quick Set -> CiscoVCSExpressway ->CiscoVCS -> Unified CM ->Cisco VCS -> Cisco VCSExpressway ->MX300-G2 ->Presentation Sharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceSX20 Quick Setto CiscoTelePresenceMX300-G2 bothregistered withCisco UnifiedCommunicationsManager viaCollaborationEdge

Presentationsharing fromSX20 Quick Setto MX300-G2both registeredviaCollaborationEdge

UCJ11.1S.VCS.G.044

PassedMX200-G2 -> CiscoVCSExpressway ->CiscoVCS-> Unified CM -> CiscoVCS -> Cisco VCSExpressway -> SX80Codec

Verify whetherthe video callfrom CiscoTelePresenceMX200-G2 toCiscoTelePresenceSX80 Codecboth registeredwith CiscoUnifiedCommunicationsManager viaCollaborationEdge can beestablishedsuccessfully

Making videocall fromMX200-G2 toSX80 Codecboth registeredviaCollaborationEdge

UCJ11.1S.VCS.G.045

PassedSX80 Codec -> CiscoVCS Expressway ->CiscoVCS -> Unified CM ->DX70 -> PresentationSharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceSX80 Codecregistered withCisco UnifiedCommunicationsManager viaCollaborationEdge to CiscoDX70 registeredwith CiscoUnifiedCommunicationsManager

Presentationsharing fromSX80 Codec toDX70 viaCollaborationEdge

UCJ11.1S.VCS.G.046



PassedMX200-G2 ->Cisco VCSExpressway >CiscoVCS->Unified CM ->Cisco VCS -> Cisco VCSExpressway -> SX80Codec ->Hold/Transfer ->CiscoVCSExpressway ->CiscoVCS ->Unified CM-> DX80

Verify whetherthe consultativecall transferfrom CiscoTelePresenceMX200-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge to CiscoDX80 registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Consultative calltransfer fromMX200-G2 toDX80 viaCollaborationEdge

UCJ11.1S.VCS.G.047

PassedMX200-G2 -> CiscoVCSExpressway ->CiscoVCS-> Unified CM -> SX20Quick Set MX300-G2 ->Add -> Cisco VCSExpressway ->CiscoVCS-> Unified CM -> EX90(Hold/Resume)

Verify whetherHold / Resume avideoconferenceamong CiscoTelePresenceMX200-G2,CiscoTelePresenceSX20 Quick Setboth registeredin Cisco UnifiedCommunicationsManager viaCollaborationEdge and CiscoTelePresenceSystem EX90registered withCisco UnifiedCommunicationsManager workssuccessfully

Hold/Resume avideoconferenceamongMX200-G2 ,SX20 Quick Setand EX90 viaCollaborationEdge

UCJ11.1S.VCS.G.048



PassedMX200-G2 -> CiscoVCSExpressway ->CiscoVCS-> Unified CM ->DX80(Hold/Resume)

Verify whetherthe Hold /Resume a videocall from CiscoTelePresenceMX200-G2registered inCisco UnifiedCommunicationsManager viaCollaborationEdge to CiscoDX80 registeredwith CiscoUnifiedCommunicationsManager workssuccessfully

Hold/ Resume avideo call fromMX200-G2 toDX80 viaCollaborationEdge

UCJ11.1S.VCS.G.049

PassedMX300-G2 -> CiscoVCSExpressway ->CiscoVCS-> Unified CM -> SX10Quick Set MX300-G2 ->Add -> Cisco VCSExpressway ->CiscoVCS-> Unified CM ->EX90(PresentationSharing)

Verify whetherpresentation canbe sharedsuccessfully invideoconferenceamong CiscoTelePresenceMX300-G2,CiscoTelePresenceSX10 Quick Setregistered withCisco UnifiedCommunicationsManager viaCollaborationEdge and CiscoTelePresenceSystem EX90registered withCisco UnifiedCommunicationsManager

PresentationSharing in videoconferenceamongMX300-G2 ,SX10 Quick Setand EX90 viaCollaborationEdge

UCJ11.1S.VCS.G.050



PassedSX20 Quick Set -> CiscoVCS Expressway ->CiscoVCS -> Unified CM ->DX80 -> PresentationSharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceSX20 Quick Setregistered inCisco UnifedCommunicationsManger viaCollaborationEdge to CiscoDX80 registeredwith CiscoUnifiedCommunicationsManager

Presentationsharing fromSX20 Quick Setto DX80 viaCollaborationEdge

UCJ11.1S.VCS.G.051

PassedSX20 Quick Set -> CiscoVCSExpressway ->CiscoVCS -> Unified CM ->DX80 SX20 Quick Set ->Add -> Cisco VCSExpressway ->CiscoVCS-> Unified CM->EX90->Conference

Verify whetherthe videoconferenceamong CiscoTelePresenceSX20 Quick Setregistered inCisco UnifiedCommunicationsManager viaCollaborationEdge, CiscoDX80 and CiscoTelePresenceSystem EX90both registeredwith CiscoUnifiedCommunicationsManager

Making videoconferenceamong SX20Quick Set,DX80 & EX90viaCollaborationEdge

UCJ11.1S.VCS.G.052



PassedEX90-> Cisco VCSExpressway ->CiscoVCS-> Unified CM -> 8861

Verify whetherthe video callfrom CiscoTelePresenceSystem EX90registered inCisco UnifedCommunicationsManager viaCollaborationEdge to Cisco IPPhone 8861registered withCisco UnifiedCommunicationsManager can beestablishedsuccessfully

Making callfrom EX90 to8861 viaCollaborationEdge

UCJ11.1S.VCS.G.053

PassedDX650 -> Unified CM ->SX20 Quick Set

Verify whethercall statistics canbe accessedfrom call pagewhen CiscoDX650 is invideo call withCiscoTelePresenceSX20 Quick Setboth registeredwith CiscoUnifiedCommunicationsManager

Access callstatistics fromDX650 duringvideo call

UCJ11.1S.VCS.G.054

PassedDX650 -> Unified CM ->SX20 Quick Set

Verify whethercall statistics canbe accessedfrom call pagewhen CiscoDX650 is inaudio call withCiscoTelePresenceSX20 Quick Setboth registeredwith CiscoUnifiedCommunicationsManager

Access callstatistics fromDX650 duringaudio call

UCJ11.1S.VCS.G.055



PassedNAVerify whethercall search fieldof Cisco DX650registered withCisco UnifiedCommunicationsManager , pullsresult fromRecents,Favorites,Contacts andDirectory inCisco DX650

Call search fieldpulls result fromRecents,Favorites,Contacts andDirectory inDX650

UCJ11.1S.VCS.G.056


Verify whetherthe call can bemade by twosteps fromcontact details inCisco DX650registered withCisco UnifiedCommunicationsManager

Two stepscalling for thecontact details inDX650

UCJ11.1S.VCS.G.057

PassedNAVerify whetherContact issearched fromthe beginning ofthe first and lastname from allthe providers inCisco DX650

Contact issearched fromthe beginning ofthe first and lastname from allthe providers inDX650

UCJ11.1S.VCS.G.058


Verify whetherthe SIP URIs inemail isclickable andinitiate calldirectly fromCisco DX650registered withCisco UnifiedCommunicationsManager

Clickable SIPURIs to simplifycalling inDX650

UCJ11.1S.VCS.G.059



PassedDX650 -> Unified CM ->DX70

Verify whetherthe user can usecalculatorapplication inCisco DX650when outgoingcall made fromCisco DX650 toCisco DX70both registeredwith CiscoUnifiedCommunicationsManager

Use thecalculatorapplication inDX650 Whilean OutgoingCall is made

UCJ11.1S.VCS.G.060

PassedDX650->UnifiedCM->MX300-G2

Verify whetherGmail app canbe used when anoutgoing callmade fromCisco DX650 toCiscoTelePresenceMX300-G2 bothregistered toCisco UnifiedCommunicationsManager

Use the GmailApp in DX650while anoutgoing call ismade

UCJ11.1S.VCS.G.061


Verify whetherYoutube app canbe used when anoutgoing callmade fromCisco DX650 toCiscoTelePresenceMX200-G2 bothregistered toCisco UnifiedCommunicationsManager

Use the YoutubeApp in DX650while anoutgoing call ismade

UCJ11.1S.VCS.G.062




Verify whetherGoogle app canbe used when anoutgoing callmade fromCisco DX650 toCiscoTelePresenceMX300-G2 bothregistered toCisco UnifiedCommunicationsManager

Use the GoogleApp in DX650while anoutgoing call ismade

UCJ11.1S.VCS.G.063


Verify whetherMusic app canbe used when anoutgoing callmade fromCisco DX650 toCiscoTelePresenceMX200-G2 bothregistered toCisco UnifiedCommunicationsManager

Use the MusicApp in DX650while anoutgoing call ismade

UCJ11.1S.VCS.G.064

PassedNAVerify whetherthe Mouse canbe connected toCisco DX650usingUSB cableand Mouseevent is receivedbyCiscoDX650

Connect Mouseto DX650 usingUSB cable

UCJ11.1S.VCS.G.065

PassedNAVerify whetheralternate UDSserver can beadded to CiscoDX650registered withCisco UnifiedCommunicationsManager

Add alternateUDS server inDX650

UCJ11.1S.VCS.G.066



PassedNAVerify whetherAutomaticProblem ReportUpload can beenabled in CiscoDX650 in theProduct SpecificConfigurationLayout portionof Cisco UnifiedCommunicationsManager

AutomaticProblem ReportUpload inDX650

UCJ11.1S.VCS.G.067

PassedNAVerify whetherFIPS mode ispresent underProduct SpecificConfigurationpage of CiscoDX650registered withCisco UnifiedCommunicationsManager

Verify FIPSmode underProduct SpecificConfiguration ofDX650

UCJ11.1S.VCS.G.068

PassedNAVerify whetherpassword toaccess settingsfor CiscoDX650 can beset usingcommon phoneprofile for CiscoDX650

Set password forsettings inDX650

UCJ11.1S.VCS.G.069

PassedNAVerify whethersettings can beaccessed byenteringpassword inCisco DX650registered withCisco UnifiedCommunicationsManager

Access settingsby enteringpassword inDX650

UCJ11.1S.VCS.G.070



PassedDX70 -> Unified CM ->Integrator Package C90

Verify whethercall statistics isaccessibleduring a callbetween CiscoDX70 and CiscoTelePresenceSystemIntegratorPackage C90when both areregistered withCisco UnifiedCommunicationsManager

Call statisticsaccess fromDX70 during avideo call

UCJ11.1S.VCS.G.071

PassedDX70 -> Unified CM ->Integrator Package C90DX70 -> Transfer ->Unified CM ->DX80DX80->UnifiedCM->Integrator PackageC90

Verify whethercall statistics isaccessible fromCisco DX80when the call istransferred fromCisco DX70which was in acall with CiscoTelePresenceSystemIntegratorPackage C90, alldevices areregistered withCisco UnifiedCommunicationsManager

Call statisticsaccess in DX80after calltransfer fromDX70

UCJ11.1S.VCS.G.072



PassedDX70 -> Unified CM->Sip Trunk -> CiscoVCS-> Integrator Package C90

Verify whethercall statistics isaccessibleduring a callbetween CiscoDX70 and CiscoTelePresenceSystemIntegratorPackage C90when CiscoTelePresenceSystemIntegratorPackage C90 isregistered withCiscoTelePresenceVideoCommunicationServer

Call statisticsaccess fromDX70 during avideo call withIntegratorPackage C90registered toCisco VCS

UCJ11.1S.VCS.G.073

PassedDX70(PresentationSharing) -> Unified CM-> Integrator Package C90

Verify whethercall statistics isaccessibleduringpresentationsharing betweenCiscoDX70 andCiscoTelePresenceSystemIntegratorPackage C90when bothregistered withCisco UnifiedCommunicationsManager

Call statisticsaccess fromDX70 duringpresentationsharing

UCJ11.1S.VCS.G.074



PassedDX70(PresentationSharing) -> Unified CM->Sip Trunk -> CiscoVCS-> Integrator Package C90

Verify whethercall statistics isaccessibleduringpresentationsharing betweenCiscoDX70 andCiscoTelePresenceSystemIntegratorPackage C90when CiscoTelePresenceSystemIntegratorPackage C90registered withCiscoTelePresenceVideoCommunicationServer

Call statisticsaccess fromDX70 duringpresentationsharing withIntegratorPackage C90registered toCisco VCS

UCJ11.1S.VCS.G.075

PassedDX70 -> Unified CM ->DX80(1) DX70 -> Callpark -> Unified CM ->DX80(2) DX80(1)->Unified CM -> DX80(2)

Verify whethercall statistics isaccessible aftera call parked inCisco DX70 isretrieved fromCisco DX80both registeredwith CiscounifiedCommunicationsManager

Call statisticsaccess fromDX70 andDX80 during avideo call

UCJ11.1S.VCS.G.076

PassedDX70 -> Unified CM ->DX80 DX70 -> UnifiedCM -> Add -> IntegratorPackage C90

Verify whethercontacts searchfield isaccessible fromCisco DX70during a videocall to addanother callregistered withCisco UnifiedCommunicationsManager

Contacts Searchfield accessfrom DX70 toget contacts

UCJ11.1S.VCS.G.077



PassedDX70 -> Unified CM ->DX80 DX70 -> Add ->Unified CM ->Sip Trunk-> CiscoVCS-> IntegratorPackage C90

Verify whethercontacts searchfield isaccessible fromCisco DX70during a videocall to addanother callregistered withCiscoTelePresenceVideoCommunicationServer

Contacts Searchfield accessfrom DX70 toget contacts tocall from and toadd another call

UCJ11.1S.VCS.G.078

PassedIntegrator Package C90->Unified CM-> DX70

Verify whethervideo call fromCiscoTelePresenceSystemIntegratorPackage C90registered withCisco UnifiedCommunicationsManager isreceived inPicture-in-Picturewindow whileworking in PCmode

Video calls arereceived inPicture-in-Picture(PIP) windowwhile workingin PC mode

UCJ11.1S.VCS.G.079


Verify whethervideo call fromCiscoTelePresenceSystemIntegratorPackage C90registered withCiscoTelePresenceVideoCommunicationServer isreceived inPicture-in-Picturewindow whileworking in PCmode

Video call fromIntegratorPackage C90registered withCisco VCS isreceived inPicture-in-Picture(PIP) windowwhile workingin PC mode

UCJ11.1S.VCS.G.080




Verify whetheraudio call fromCiscoTelePresenceSystemIntegratorPackage C90registered withCiscoTelePresenceVideoCommunicationServer isreceived inPicture-in-Picturewindow inCiscoDX80 whileworking in PCmode

Audio calls fromIntegratorPackage C90registered withCisco VCS isreceived inPicture-in-Picture(PIP) window inDX80 whileworking in PCmode

UCJ11.1S.VCS.G.081


Verify whetheraudio call fromCiscoTelePresenceSystemIntegratorPackage C90registered withCisco UnifiedCommunicationsManager isreceived inPicture-in-Picturewindow inCiscoDX80 whileworking in PCmode

Audio calls arereceived inPicture-in-Picture(PIP) window inDX80 whileworking in PCmode

UCJ11.1S.VCS.G.082



PassedIntegrator Package C90->Cisco VCS-> Sip Trunk-> Unified CM-> DX80

Verify whetherthe PC screencan be viewed inCisco DX80while answeringa video call fromCiscoTelePresenceSystemIntegratorPackage C90registered withCiscoTelePresenceVideoCommunicationServer

Stay viewing thescreen of PCafter answeringa video call inDX80

UCJ11.1S.VCS.G.083

PassedIntegrator Package C90->Cisco VCS-> Sip Trunk-> Unified CM-> DX80

Verify whetheraudio calls fromCiscoTelePresenceSystemIntegratorPackage C90registered withCiscoTelePresenceVideoCommunicationServer arerepresented withPicture-in-Pictureover the PCscreen

RepresentationofPicture-in-Picture(PIP) over thePC screenduring audio call

UCJ11.1S.VCS.G.084



PassedIntegrator Package C90->Unified CM -> DX70

Verify whetherPicture-in-Picturewindow can beescalated to fullscreen afteranswering avideo call fromCiscoTelePresenceSystemIntegratorPackage C90 bydouble tappingin Cisco DX70while viewingpresentation,both registeredwith CiscoUnifiedCommunicationsManager

Escalating fromPicture-in-Picture(PIP) window tofull screenduringpresentation inDX70 afteranswering a callfrom IntegratorPackage C90

UCJ11.1S.VCS.G.085

PassedIntegrator PackageC90->Cisco VCS -> SipTrunk -> Unified CM ->DX80

Verify whetherPicture-in-Picturewindow can beescalated to fullscreen afteranswering avideo call fromCiscoTelePresenceSystemIntegratorPackage C90registered withCiscoTelePresenceVideoCommunicationServer bydouble tappingin Cisco DX80while viewingpresentation

Escalating fromPicture-in-Picture(PIP) window tofull screen inDX80 afteranswering a callfrom IntegratorPackage C90registered withCisco VCS

UCJ11.1S.VCS.G.086



PassedIntegrator Package C90->Unified CM -> DX80

Verify whetherPicture-in-Picturewindow can beescalated to fullscreen afteranswering avideo call fromCiscoTelePresenceSystemIntegratorPackage C90 bydouble tappingin Cisco DX80while viewingpresentation,both registeredwith CiscoUnifiedCommunicationsManager

Escalating fromPicture-in-Picture(PIP) window tofull screenduringpresentation inDX80 afteranswering avideo call fromIntegratorPackage C90

UCJ11.1S.VCS.G.087

PassedIntegrator Package C90 ->Cisco VCS -> Sip Trunk-> Unified CM -> DX70

Verify whetherPicture-in-Picturewindow can beescalated to fullscreen afteranswering avideo call fromCiscoTelePresenceSystemIntegratorPackage C90registered withCiscoTelePresenceVideoCommunicationServer bydouble tappingin Cisco DX70while viewingpresentation

Escalating fromPicture-in-Picture(PIP) window tofull screen inDX70 afteranswering a callfrom IntegratorPackage C90registered withCisco VCS

UCJ11.1S.VCS.G.088



PassedIntegrator Package C90 ->Unified CM -> DX70DX70 -> Shared line ->DX80 DX70 -> Call park-> Unified CM -> Callretrieval -> DX80

Verify whethercall betweenCiscoDX70 andCiscoTelePresenceSystemIntegratorPackage C90can be parked inCisco DX70 canretrieved fromCisco DX80 allthe endpointsare registered inCisco UnifiedCommunicationsManager

Call park fromDX70 to DX80

UCJ11.1S.VCS.G.089

PassedIntegrator Package C90 ->Unified CM -> DX70DX70 -> Shared line ->DX80 DX70 -> Hold ->Unified CM ->Resume ->DX80

Verify whethercall from CiscoTelePresenceSystemIntegratorPackage C90which is put onhold in CiscoDX70 can beresumed fromCisco DX80,when both are inshared line allregistered inCisco UnifiedCommunicationsManager

Hold a call inDX70 which isin a call withIntegratorPackage C90registered withUnified CM andResume inDX80 whenboth are inshared line

UCJ11.1S.VCS.G.090



PassedIntegrator Package C90 ->Unified CM -> DX70DX70 -> shared line ->DX80 DX80 ->Barge->Unified CM->DX70, IntegratorPackage C90

Verify whethercall from CiscoTelePresenceSystemIntegratorPackage C90 toCisco DX70 canbe barged fromCisco DX80 tomake aconference callwhen allendpointsregistered withCisco UnifiedCommunicationsManager

Call bargebetweenIntegratorPackage C90registered withUnified CM andDX endpoints

UCJ11.1S.VCS.G.091

PassedIntegrator Package C90 ->Cisco VCS -> Sip Trunk-> Unified CM -> DX70DX70 -> shared line ->DX80 DX80 ->Barge->Unified CM->DX70, IntegratorPackage C90

Verify whethercall from CiscoTelePresenceSystemIntegratorPackage C90registered withCiscoTelePresenceVideoCommunicationServer to CiscoDX70 can bebarged fromCisco DX80 tomake aconferencecall,bothregistered inCisco UnifiedCommunicationsManager

Call bargebetweenIntegratorPackage C90registered withCisco VCS andDX endpoints

UCJ11.1S.VCS.G.092



PassedIntegrator Package C90 ->Cisco VCS -> Sip Trunk-> Unified CM -> DX80DX70 -> Shared line ->DX80 DX80 -> HoldDX70->Resume->UnifiedCM->Integrator PackageC90

Verify whethercall from CiscoTelePresenceSystemIntegratorPackage C90registered withCiscoTelePresenceVideoCommunicationServer which isput on hold inCisco DX80 canbe resumed fromCisco DX70,when both usesa shared line,both registeredin Cisco UnifiedCommunicationsManager

Hold a call inDX70 which isin a call withIntegratorPackage C90registered withCisco VCS andResume inDX80 whenboth are inshared line

UCJ11.1S.VCS.G.093

PassedIntegrator Package C90 ->Unified CM -> DX70

Verify whetherPC audio ismuted in CiscoDX70 whileansweringincoming callfrom CiscoTelePresenceSystemIntegratorPackage C90registered withCisco UnifiedCommunicationsManager

PC Audio call ismuted in DX70while answeringincoming call

UCJ11.1S.VCS.G.094



PassedIntegrator Package C90 ->Cisco VCS -> Sip Trunk-> Unified CM -> DX80

Verify whetherPC audio ismuted in CiscoDX80 whileansweringincoming callfrom CiscoTelePresenceSystemIntegratorPackage C90registered withCiscoTelePresenceVideoCommunicationsManager

PC Audio call ismuted in DX80while answeringincoming callfrom IntegratorPackage C90registered inCisco VCS

UCJ11.1S.VCS.G.095

Passed500-32 (PresentationSharing) -> Unified CMcluster 1 -> Sip Trunk ->Unified CM cluster 2 ->line 2 of DX70

Verify whetherpresentation canbe shared in aninter-cluster callfrom CiscoTelePresenceSystem 500-32to line 2 ofCisco DX70both registeredwith CiscoUnifiedCommunicationsManager

PresentationSharing in aninter-cluster callfrom 500-32 toline 2 of DX70

UCJ11.1S.VCS.G.096



Passed500-32 (PresentationSharing) -> Unified CM-> SX10Quick Set -> CallForward All -> UnifiedCM -> line 2 of DX70

Verify whetherpresentation canbe shared fromCiscoTelePresenceSystem 500-32to line 2 ofCisco DX70when CallForward All isset from CiscoTelePresenceSX10 Quick Setto line 2 ofCisco DX70 allregistered withCisco UnifiedCommunicationsManager

PresentationSharing from500-32 to line 2of DX70 whenCFA is set fromSX10 Quick Setto line 2 ofDX70

UCJ11.1S.VCS.G.097

Passed500-32 (PresentationSharing) -> Unified CMcluster 1 -> Sip Trunk ->Unified CM cluster 2 ->SX10 Quick Set -> CallForward All -> UnifiedCM cluster 2 -> line 2 ofDX70

Verify whetherpresentation canbe shared in aninter-cluster callfrom CiscoTelePresenceSystem 500-32to line 2 ofCisco DX70when CallForward All isset from CiscoTelePresenceSX10 Quick Setto line 2 ofCisco DX70 allregistered withCisco UnifiedCommunicationsManager

PresentationSharing in aninter-cluster callfrom 500-32 toline 2 of DX70when CFA is setfrom SX10Quick Set to line2 of DX70

UCJ11.1S.VCS.G.098



Passed500-32(PresentationSharing) -> Unified CMcluster 1 -> Sip Trunk ->Unified CM cluster 2 ->DX70(CFA) -> UnifiedCM cluster 2 -> DX650

Verify whetherpresentation canbe shared fromCiscoTelePresenceSystem 500-32registered inCisco UnifiedCommunicationsManager cluster1 to CiscoDX650 when acall is forwardedfrom CiscoDX70 bothregistered inCisco UnifiedCommunicationsManager cluster2

Presentationsharing in aninter-clustervideo call from500-32 to DX70which has setCall ForwardAll from DX70to DX650

UCJ11.1S.VCS.G.099

Passed500-32(PresentationSharing) -> Unified CM->DX80(CFA) -> UnifiedCM -> DX650

Verify whetherpresentation canbe shared fromCiscoTelePresenceSystem 500-32to Cisco DX650when CallForward All isset from CiscoDX80 to CiscoDX650 allregistered inCisco UnifiedCommunicationsManager

Presentationsharing in avideo call from500-32 to DX80which has setCall ForwardAll from DX80to DX650

UCJ11.1S.VCS.G.100



Passed500-32 (PresentationSharing) -> Unified CM-> SX10Quick Set -> CallForward All -> UnifiedCM -> line 2 of DX80

Verify whetherpresentation canbe shared fromCiscoTelePresenceSystem 500-32to line 2 ofCisco DX80when CallForward All isset from CiscoTelePresenceSX10 Quick Setto line 2 ofCisco DX80 allregistered withCisco UnifiedCommunicationsManager

PresentationSharing from500-32 to line 2of DX80 whenCFA is set fromSX10 Quick Setto line 2 ofDX80

UCJ11.1S.VCS.G.101

Passed500-32 (PresentationSharing) -> Unified CMcluster 1 -> Sip Trunk ->Unified CM cluster 2 ->SX10 Quick Set -> CallForward All -> UnifiedCM cluster 2 -> line 2 ofDX80

Verify whetherpresentation canbe shared in aninter-cluster callfrom CiscoTelePresenceSystem 500-32registered withCisco UnifiedCommunicationsManager cluster1 to line 2 ofCisco DX80when CallForward All isset from CiscoTelePresenceSX10 Quick Setto line to 2 ofCisco DX80both registeredwith CiscoUnifiedCommunicationsManager cluster2

PresentationSharing in aninter-cluster callfrom 500-32 toline 2 of DX80when CFA is setfrom SX10Quick Set to line2 of DX80

UCJ11.1S.VCS.G.102



CSCuy17753FailedDX650 -> Unified CM ->SX10 SX20 -> UnifiedCM -> DX650

Verify whetherthe call can beresumed usingthe hard key inCisco DX650during multiplecalls,allendpointsregistered withCisco UnifiedCommunicationsManager

Resume the callin DX650whichis registered inUnified CMusing the Hardkey

UCJ11.1S.VCS.G.103

CSCuy17439FailedSX20 Quick Set ->Unified CM -> SX10Quick Set SX20Quick Set-> Hold/Transfer ->Unified CM -> SX80Codec

Verify whetherthe touch UI isnot restartedwhen the userselect the blankoption in CiscoTelePresenceSX10 Quick Setwhich isregistered withCisco UnifiedCommunicationsManager

Make a callfrom SX20Quick Set toSX10 Quick Setwhich isregistered inUnified CM andperform aConsultativetransfer fromSX10 Quick Set

UCJ11.1S.VCS.G.104

CSCuy00794FailedSX20 Quick Set -> CiscoVCS -> Sip Trunk ->Unified CM ->MX200-G2(Hold)

Verify whetherthe user can seethe call placedon holdmessagein CiscoTelePresenceSX20 Quick Setwhich isregistered withCisco UnifiedCommunicationsManager

Make a callfrom SX20Quick Set whichis registered inVCS toMX200-G2which isregistered inUnified CM andplace the call onhold fromMX200-G2

UCJ11.1S.VCS.G.105

CSCuy09214FailedMX200-G2 -> UnifiedCM -> DX650

Verify whetherthe call is endedin Cisco DX650which isregistered withCisco UnifiedCommunicationsManager whenthe receiver isplaced down

Place thereceiver down inDX650 which isregistered inUnified CM toend the call

UCJ11.1S.VCS.G.106



CSCuy19468FailedMX200-G2 -> UnifiedCM -> SX80 Codec

Verify whetherthe call isestablished byfrom CiscoTelepresenceMX200-G2 toCiscoTelepresenceSX80Codecusing touch ui

Make a callfromMX200-G2 toSx80 Codecusing touch ui

UCJ11.1S.VCS.G.107

CSCuy09015FailedEX90->UnifiedCM->DX650->Decline

Verify whetherthe video callfrom CiscoTelePresenceSystem EX90can be declinedfrom CiscoDX650 bothregistered inCisco UnifiedCommunicationsManager

Decline the callfrom End hardkey in DX650

UCJ11.1S.VCS.G.108

Cisco Unity ConnectionDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedCJW1 -> Unified CM ->CJW2 -> UnityConnection

Verify whetherthe Cisco Jabberfor Windows isnot received anymessagewaitingindication afterdisable theoption MessageWaitingIndication inCisco UnityConnection

Video greetingnotification inCJW whendisable theMWIoption in CUC

UCJ11.1S.CUC.G.207


Test Results SummaryCisco Unity Connection

PassedIP Phone A -> UnifiedCM -> IP Phone B ->Unity Connection

Verify whetherthe Cisco IPPhone 88xx isnot received anymessagewaitingindication afterdisable theoption MessageWaitingIndication inCisco UnityConnection

Video greetingsnotification in88xx whendisable theMWIoption in CUC

UCJ11.1S.CUC.G.210

PassedCJW -> Unified CM ->CJM -> UnityConnection

Verify whetherthe videogreetingsrerecord isworked fine forCisco Jabber forMac

Rerecord videogreetings inCJM

UCJ11.1S.CUC.G.212

PassedIP Phone A ->VCS-E ->VCS-C -> Unified CM-> Unity Connection

Verify whetherthe voice mail isconnected inCisco IP Phone78xx / 88xxsuccessfullywhen it isregisteredthroughCollaborationEdge

Voice mailconnection in78xx / 88xxafter registeredthrough CE

UCJ11.1S.CUC.G.022

PassedIP Phone A ->VCS-E ->VCS-C -> Unified CM-> Unity Connection

Verify whetherthe voice mailTUI prompt iswork in Cisco IPPhone 78xx /88xxsuccessfullywhen it isregisteredthroughCollaborationEdge

Voice mailprompt in 78xx/ 88xx afterregisteredthrough CE

UCJ11.1S.CUC.G.023



PassedIP Phone A ->VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->IP Phone B -> UnityConnection

Verify whetherthe voice mail issent successfullyfrom Cisco IPPhone 78xx toCisco IP Phone88xx when it isregisteredthroughCollaborationEdge

Send voicemails from 78xxto 88xx afterregisteredthrough CE

UCJ11.1S.CUC.G.024

PassedCJW -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->IP Phone A -> UnityConnection

Verify whetherthe Cisco IPPhone 78xx /88XX is notreceived anymessagewaitingindication afterdisabling theoption MessageWaitingIndication inCisco UnityConnection

Voice mailnotification in78xx / 88xxwhen disable theMWI option inCUC

UCJ11.1S.CUC.G.021


Verify whetherthe voice mailnotification isdisplayedsuccessfully inCisco IP Phone88xx when it isregisteredthroughCollaborationEdge

Voice mailnotification in88xx afterregisteredthrough CE

UCJ11.1S.CUC.G.025


Verify whetherthe saved voicemails are playedsuccessfullyusing the voiceprompt in CiscoIP Phone 78xx /88xx when it isregisteredthroughCollaborationEdge

Play voice mailsin 78xx / 88xxafter registeredthrough CE

UCJ11.1S.CUC.G.027




Verify whetherthe voice mailreceived dateand time isdisplayedsuccessfully inCisco IP Phone78xx / 88xxwhen it isregisteredthroughCollaborationEdge

Date and time ofvoice mails in78xx / 88xxafter registeredthrough CE

UCJ11.1S.CUC.G.028


Verify whetherthe retrievedvoice mails aresavedsuccessfullyusing the voiceTUI prompt inCisco IP Phone78xx / 88xxwhen it isregisteredthroughCollaborationEdge

Retrieve andsave voice mailsin 78xx / 88xxafter registeredthrough CE

UCJ11.1S.CUC.G.029


Verify whethervoice mails aredeletedsuccessfullyusing the voiceprompt in CiscoIP Phone 78xx /88xx when it isregisteredthroughCollaborationEdge

Delete voicemails in 78xx /88xx afterregisteredthrough CE

UCJ11.1S.CUC.G.030




Verify whethervoice mails areviewed visuallyin Cisco IPPhone 88xxwhile sendingvoicemails fromCisco Jabber forWindows when88xx isregisteredthroughCollaborationEdge

View voicemails visually in88xx afterregisteredthrough CE

UCJ11.1S.CUC.G.031


Verify whetherthe visual voicemails are playedsuccessfully inCisco IP Phone88xx whilesendingvoicemails fromCisco Jabber forWindows whenit is registeredthroughCollaborationEdge

Play visualvoice mails in88xx afterregisteredthrough CE

UCJ11.1S.CUC.G.033


Verify whetherthe voice mailduration isviewed visuallyin Cisco IPPhone 88xxwhen it isregisteredthroughCollaborationEdge

View voice mailduration visuallyin 88xx afterregisteredthrough CE

UCJ11.1S.CUC.G.034




Verify whetherthe voice mailsare sortedsuccessfully asper the date andtime in Cisco IPPhone 88xxwhen it isregisteredthroughCollaborationEdge

Sort voice mailsin 88xx afterregisteredthrough CE

UCJ11.1S.CUC.G.035


Verify whetherthe voice mailsare playingsuccessfullyafter multiplepause and playin Cisco IPPhone 88xxwhen it isregisteredthroughCollaborationEdge

Pause and playvoice mails in88xx afterregisteredthrough CE

UCJ11.1S.CUC.G.036

PassedCJW -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->IP Phone B -> UnityConnection

Verify whetherthe voice mailrewind isworkedsuccessfully inCisco IP Phone88xx whilesendingvoicemails fromCisco Jabber forWindows whenit is registeredthroughCollaborationEdge

Rewind voicemails in 88xxafter registeredthrough CE

UCJ11.1S.CUC.G.037




Verify whetherthe visual voicemails are deletedsuccessfullyafter deleteconfirmation inCisco IP Phone88xx when it isregisteredthroughCollaborationEdge

Delete visualvoice mails in88xx afterregisteredthrough CE

UCJ11.1S.CUC.G.038


Verify whetherthe voice mailcount isdisplayedvisually in CiscoIP Phone 88xxwhen it isregisteredthroughCollaborationEdge

Visual voicemail count in88xx afterregisteredthrough CE

UCJ11.1S.CUC.G.039

PassedWeb Inbox -> UnityConnection -> IP PhoneA -> VCS E -> VCS C -> Unity Connection

Verify whetherthe voice mailsare viewedvisually in CiscoIP Phone 88xxsuccessfullywhile sendingvoicemails fromweb inbox tool

View voicemails visually in88xx whilesending fromweb inbox afterregisteredthrough CE

UCJ11.1S.CUC.G.901

PassedIP Phone A ->VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJW -> UnityConnection

Verify whetherthe visual voicemail reply isworking fine inCisco IP Phone88xx when it isregisteredthroughCollaborationEdge

Reply to thevisual voicemails from 88xxto CJW after itis registeredthrough CE

UCJ11.1S.CUC.G.902



PassedIP Phone A ->VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJW -> UnityConnection

Verify whetherthe visual voicemail forward isworking fine inCisco IP Phone88xx when it isregisteredthroughCollaborationEdge

Forward visualvoicemails from88xx to CJWafter it isregisteredthrough CE

UCJ11.1S.CUC.G.903


Verify whetherthe visual voicemail count isdisplayedcorrectly inCisco IP Phone88xx bymarking the readvoicemail asunread when88xx isregisteredthroughCollaborationEdge

Visual voicemail count in88xx after voicemails aremarked asunread by theend user

UCJ11.1S.CUC.G.904

PassedNAVerify whetherthe errornotification isdisplaying inCisco IP Phone88xx whileentering wrongPIN for visualvoicemail loginwhen 88xx isregisteredthroughCollaborationEdge

Errornotification in88xx whileentering wrongPIN for visualvoice mail after88xx isregisteredthrough CE

UCJ11.1S.CUC.G.905

PassedCJW -> Unified CM ->IP Phone A ->VCS-E ->VCS-C -> Unified CM-> Unity Connection ->VCS-E -> VCS-C -> IPPhone B

Verify whetherthe voice mailpark is workingfine in Cisco IPPhone 88xxwhen it isregisteredthroughCollaborationEdge

Park visualvoicemails in88xx after it isregisteredthrough CE

UCJ11.1S.CUC.G.906



PassedCJW -> Unified CM ->IP Phone A ->VCS-E ->VCS-C -> Unified CM-> Unity Connection

Verify whetherthe parkreversion forvoice mail isworking fine inCisco IP Phone88xx when it isregisteredthroughCollaborationEdge

Voicemail parkreversion in88xx after it isregisteredthrough CE

UCJ11.1S.CUC.G.907

PassedIP Phone A ->VCS-E ->VCS-C -> Unified CM-> Unity Connection->VCS-C -> VCS-E ->CJW ,IP Phone B, IPPhone C

Verify whetherthe forwardvisual voicemails tomultipleusers fromCiscoIP Phone 88xxwhen it isregisteredthroughCollaborationEdge

Forward visualvoice mail tomultiple usersfrom 88xx afterit is registeredthrough CE

UCJ11.1S.CUC.G.908


Verify whetherthe secure voicemails areplaying in CiscoIP Phone 88xxby using thevisual voicemail optionwhen 88xx isregisteredthroughCollaborationEdge

Play securevoice messagesin 88xx usingvisual voicemailoption

UCJ11.1S.CUC.G.909


Verify whetherthe voice mailsare sorted byselecting theurgent option inCisco IP Phone88xx when it isregisteredthroughCollaborationEdge

Sort voicemessages as perthe urgentoption in 88xxusing visualvoicemail

UCJ11.1S.CUC.G.910




Verify whethervoice mails areviewed visuallyin Cisco Jabberfor iPad when itis registeredthrough MobileRemote Access

View voicemails visually inCJIPad afterlogin throughMRA

UCJ11.1S.CUC.G.123


Verify whetherthe voicemailnotifications aredisplayedsuccessfully inCisco Jabber foriPad whilesendingvoicemails fromweb inboxwhenthe Cisco Jabberfor iPad isregisteredthrough MobileRemote Access

Voicemailnotification inCJIPad afterlogin throughMRA

UCJ11.1S.CUC.G.125

PassedNAVerify whetherthe voice mail isconnected inCisco Jabber foriPhonesuccessfullywhen it isregisteredthrough MobileRemote Access

Voice mailconnection inCJI after loginthrough MRA

UCJ11.1S.CUC.G.103

PassedCJI-> VCS-E -> VCS-C-> Unified CM ->VCS-C -> VCS-E ->CJW -> UnityConnection

Verify whetherthe voice mail issent successfullyfrom CiscoJabber foriPhone when itis registeredthrough MobileRemote Access

Send voicemails from CJIafter loginthrough MRA

UCJ11.1S.CUC.G.108



PassedCJI1 -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJI2 -> UnityConnection

Verify whethervoice mails areviewed visuallyin Cisco Jabberfor iPhone whenit is registeredthrough MobileRemote Access

View voicemails visually inCJI after loginthrough MRA

UCJ11.1S.CUC.G.122

PassedCJA -> VCS-E ->VCS-C -> Unified CM-> Unity Connection

Verify whetherthe voice mail isconnected inCisco Jabber forAndroidsuccessfullywhen it isregisteredthrough MobileRemote Access

Voice mailconnection inCJA after loginthrough MRA

UCJ11.1S.CUC.G.101

PassedCJA -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJW -> UnityConnection

Verify whetherthe voice mail issent successfullyfrom CiscoJabber forAndroid when itis registeredthrough MobileRemote Access

Send voicemails from CJAafter loginthrough MRA

UCJ11.1S.CUC.G.105

PassedCJW -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJA -> UnityConnection

Verify whetherthe voice mailnotification isshownsuccessfully inCisco Jabber forAndroid when itis registeredthrough MobileRemote Access

Voice mailnotification inCJA after loginthrough MRA

UCJ11.1S.CUC.G.106


Verify whetherthe voice mail isretrievedsuccessfully inCisco Jabber forAndroid when itis registeredthrough MobileRemote Access

Retrieve voicemail in CJAafter loginthrough MRA

UCJ11.1S.CUC.G.107




Verify whetherthe voice mailreceived dateand time isdisplayedsuccessfully inCisco Jabber forAndroid when itis registeredthrough MobileRemote Access

Date and Timedisplay of voicemail in CJAafter loginthrough MRA

UCJ11.1S.CUC.G.111

PassedCJA2 -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJA1 -> UnityConnection

Verify whetherthe voice mailsare savedsuccessfully inCisco Jabber forAndroid when itis registeredthrough MobileRemote Access

Save voice mailin CJA afterlogin throughMRA

UCJ11.1S.CUC.G.113

PassedCJA1 -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJA2 -> UnityConnection

Verify whethervoice mails areviewed visuallyin Cisco Jabberfor Androidwhen it isregisteredthrough MobileRemote Access

View voicemails visually inCJA after loginthrough MRA

UCJ11.1S.CUC.G.121

PassedCJW-> VCS-E ->VCS-C -> Unified CM-> Unity Connection

Verify whetherthe voice mail isconnected inCisco Jabber forWindowssuccessfullywhen it isregisteredthroughCollaborationEdge

Voice mailconnection inCJW after loginthrough CE

UCJ11.1S.CUC.G.001



PassedCJW-> VCS-E ->VCS-C -> Unified CM-> Unity Connection

Verify whetherthe voice mailconnectionstatus is shownsuccessfully inCisco Jabber forWindows whenit is registeredthroughCollaborationEdge

Voice mailconnectionstatus in CJWafter loginthrough CE

UCJ11.1S.CUC.G.002

PassedCJW2 -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJW1 -> UnityConnection

Verify whetherthe voice mailsare sentsuccessfullyfrom CiscoJabber forWindows whenit is registeredthroughCollaborationEdge

Send voicemails fromCJWafter loginthrough CE

UCJ11.1S.CUC.G.005


Verify whetherthe voice mailreceived dateand time isdisplayedsuccessfully inCisco Jabber forWindows whenit is registeredthroughCollaborationEdge

Date and Timedisplay for voicemail in CJWafter loginthrough CE

UCJ11.1S.CUC.G.011


Verify whetherthe voice mailsare savedsuccessfully inCisco Jabber forWindows whenit is registeredthroughCollaborationEdge

Save voice mailin CJW afterlogin throughCE

UCJ11.1S.CUC.G.013



PassedCJM-> VCS-E ->VCS-C -> Unified CM-> Unity Connection

Verify whetherthe voice mailconnectionstatus is shownsuccessfully inCisco Jabber forMac when it isregisteredthroughCollaborationEdge

Voice mailconnectionstatus in CJMafter loginthrough CE

UCJ11.1S.CUC.G.004

PassedCJM2 -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJM1 -> UnityConnection

Verify whetherthe voice mailnotification isshownsuccessfully inCisco Jabber forMac when it isregisteredthroughCollaborationEdge

Voice mailnotification inCJM after loginthrough CE

UCJ11.1S.CUC.G.009


Verify whetherthe voice mail isretrievedsuccessfully inCisco Jabber forMac when it isregisteredthroughCollaborationEdge

Retrieve voicemail in CJMafter loginthrough CE

UCJ11.1S.CUC.G.010


Verify whetherthe voice mailsare deletedsuccessfully inCisco Jabber forMac when it isregisteredthroughCollaborationEdge

Delete voicemail in CJMafter loginthrough CE

UCJ11.1S.CUC.G.016



CSCuy37938FailedIP Phone A -> UnifiedCM -> IP Phone B ->Unity Connection

Verify whetherthe self-view isworked fine inCisco IP Phone89xxsuccessfullywhile sending /receiving videogreetings fromCisco IP Phone88xx

Self-view in89xx whilesending/receivingvideo greetings

UCJ11.1S.CUC.G.921

Cisco IP PhoneDefectStatusCall Component FlowDescriptionTitleLogical ID

PassedIP Phone A -> Unified CM -> IPPhone B -> Unified CM -> IPPhone C

Verify whetherthe Call ForwardBusy is workedsuccessfully inCisco IP Phone7841afterchanged the DNof Cisco IPPhone B

CFB in 7841when it is inShared Line

UCJ11.1S.IPPhone.G.701


Verify whetherthe Call ForwardBusy is workedsuccessfully inCisco IP Phone7841 when it isin Shared Line

CFB in7841afterchanged theDN



Verify whetherthe Call ForwardNo Answer isworkedsuccessfully inCisco IP Phones7841 when it isin Shared Line

CFNA in7841 when itis in SharedLine



Test Results SummaryCisco IP Phone

PassedIP Phone A -> Unified CM -> IPPhone B -> Unified CM-> IPPhone C

Verify whetherthe Call ForwardNo Answer isworkedsuccessfully inCisco IP Phone7841 when it isin Shared Lineafter modifyingthe DN

CFNA in7841afterchanged theDN


PassedIP Phone A -> Unified CM1 ->ICT Trunk-> Unified CM2 -> IPPhone B -> Unified CM2 -> IPPhone C

Verify whetherthe Call ForwardBusy is workedsuccessfully inCisco IP Phone7841 when it isin Shared Linevia ICT Trunk

CFB in7841when itis in SharedLine via ICTTrunk


PassedIP Phone A -> Unified CM1 ->SIP Trunk -> Unified CM2 -> IPPhone B -> Unified CM2 -> IPPhone C

Verify whetherthe Call ForwardBusy is workedsuccessfully inCisco IP Phone7841 when it isin Shared Linevia SIP Trunk

CFB in 7841when it is inShared Linevia SIP Trunk


PassedIP Phone A -> Unified CM1 ->ICT Trunk -> Unified CM2 ->IP Phone B -> Unified CM2 ->IP Phone C

Verify whetherthe Call ForwardNo Answerworkedsuccessfully inCisco IP Phones7841 when it isin Shared Linevia ICT Trunk

CFNA in7841 when itis in SharedLine via ICTTrunk



Verify whetherthe Call ForwardNo Answerworkedsuccessfully inCisco IP Phones7841 when it isin Shared Linevia SIP Trunk

CFNA in7841 when itis in SharedLine via SIPTrunk





Verify whetherthe Call ForwardUnregistered isworkedsuccessfully inCisco IP Phone7841 when it isin Shared Line

CFUR in7841 when itis in SharedLine


PassedIP Phone A -> Unified CM1 ->ICT Trunk -> Unified CM2 ->IP Phone B -> Unified CM2->IP Phone C

Verify whetherthe Call ForwardUnregistered isworkedsuccessfully inCisco IP Phone7841 when it isin Shared Linevia ICT Trunk

CFUR in7841 when itis in SharedLine via ICTTrunk



Verify whetherthe Call ForwardUnregistered isworkedsuccessfully inCisco IP Phone7841 when it isin Shared Linevia SIP Trunk

CFUR inCisco IPPhone 7841when it is inShared Linevia SIP Trunk


PassedIP Phone A -> Unified CM -> IPPhone C -> Unified CM -> IPPhone B

Verify whetherthe Call ForwardBusy is workedsuccessfully inCisco IP Phone8841 when it isin Shared Line

CFB in 8841when it is inShared Line



Verify whetherthe Call ForwardNo Answerworkedsuccessfully inCisco IP Phones8865 when it isin Shared Line

CFNA in8865 when itis in SharedLine





Verify whetherthe Call ForwardBusy is workedsuccessfully inCisco IP Phone8841 when it isin Shared Linevia ICT Trunk

CFB in8841when itis in SharedLine via ICTTrunk



Verify whetherthe Call ForwardBusy is workedsuccessfully inCisco IP Phone8865 when it isin Shared Linevia SIP Trunk

CFB in 8865when it is inShared Linevia SIP Trunk


PassedIP Phone A -> Unified CM1 ->SIP Trunk -> CUBE -> SIPTrunk -> Unified CM2 -> IPPhone B -> Unified CM2 -> IPPhone C

Verify whetherthe Call ForwardBusy is workedsuccessfully inCisco IP Phone8841 when it isin Shared Linevia CiscoUnified BorderElement

CFB in 8841when it is inShared Linevia CUBE



Verify whetherthe Call ForwardNo Answerworkedsuccessfully inCisco IP Phones8865 when it isin Shared Linevia ICT Trunk

CFNA in8865 when itis in SharedLine via ICTTrunk



Verify whetherthe Call ForwardNo Answerworkedsuccessfully inCisco IP Phones8841 when it isin Shared Linevia SIP Trunk

CFNA in8841 when itis in SharedLine via SIPTrunk




PassedIP Phone A -> Unified CM1 ->SIP Trunk -> CUBE -> UnifiedCM2 -> IP Phone B -> UnifiedCM2 -> IP Phone C

Verify whetherthe Call ForwardNo Answerworkedsuccessfully inCisco IP Phones8865 when it isin Shared Linevia CiscoUnified BorderElement

CFNA in8865 when itis in SharedLine viaCUBE


PassedIP Phone A -> Unified CM -> IPPhone C -> Unified CM -> IPPhone B

Verify whetherthe Call ForwardUnregistered isworkedsuccessfully inCisco IP Phone8841 when it isin Shared Line

CFUR in8841 when itis in SharedLine



Verify whetherthe Call ForwardUnregistered isworkedsuccessfully inCisco IP Phone8865 when it isin Shared Linevia ICT Trunk

CFUR in8865 when itis in SharedLine via ICTTrunk



Verify whetherthe Call ForwardUnregistered isworkedsuccessfully inCisco IP Phone8841 when it isin Shared Linevia SIP Trunk

CFUR in8841 when itis in SharedLine via SIPTrunk


PassedIP Phone A -> Unified CM -> IPPhone B

Verify whetherthe hold andresume workedsuccessfully inCisco IP Phone7841 when it isin Shared Line

Hold andResume in7841 when itis in SharedLine





Verify whetherthe hold andresume workedsuccessfully inCisco IP Phone8865 when it isin Shared Line

Hold andResume in8865 when itis in SharedLine


PassedIP Phone A -> Unified CM1 ->ICT Trunk -> Unified CM2 ->IP Phone B

Verify whetherthe hold andresume workedsuccessfully inCisco IP Phone7841 when it isin Shared Linevia ICT Trunk

Hold andResume in7841 when itis in SharedLine via ICTTrunk


PassedIP Phone A -> Unified CM1 ->SIP Trunk -> Unified CM2 -> IPPhone B

Verify whetherthe hold andresume workedsuccessfully inCisco IP Phone7841 when it isin Shared Linevia SIP Trunk

Hold andResume in7841 when itis in SharedLine via SIPTrunk



Verify whetherthe hold andresume workedsuccessfully inCisco IP Phone8865 when it isin Shared Linevia ICT Trunk

Hold andResume in8865 when itis in SharedLine via ICTTrunk



Verify whetherthe hold andresume workedsuccessfully inCisco IP Phone8865 when it isin Shared Linevia SIP Trunk

Hold andResume in8865 when itis in SharedLine via SIPTrunk




PassedIP Phone A -> Unified CM1 ->SIP Trunk -> CUBE -> SIPTrunk -> Unified CM2 -> IPPhone B

Verify whetherthe hold andresume workedsuccessfully inCisco IP Phone7841 when it isin Shared Linevia CiscoUnified BorderElement

Hold andResume in7841 when itis in SharedLine viaCUBE


PassedIP Phone A -> Unified CM1 ->SIP Trunk -> CUBE -> SIPTrunk -> Unified CM2 -> IPPhone B

Verify whetherthe hold andresume workedsuccessfully inCisco IP Phone8865 when it isin Shared Linevia CiscoUnified BorderElement

Hold andResume in8865 when itis in SharedLine viaCUBE


PassedIP Phone A -> Unified CM 1 ->ICT Trunk -> Unified CM2 ->IP Phone B -> Unified CM2 ->IP Phone C

Verify whetherthe transferworkedsuccessfully inCisco IP Phone7841 when it isin Shared Linevia ICT Trunk

Call Transferby 7841when it is inShared Linevia ICTTrunk


PassedIP Phone A -> Unified CM 1 ->ICT Trunk -> Unified CM2 ->IP Phone B -> Unified CM2 ->IP Phone C

Verify whetherthe transferworkedsuccessfully inCisco IP Phone8865 when it isin Shared Linevia ICT Trunk

Call Transferby 8865when it is inShared Linevia ICTTrunk



Verify whetherthe transferworkedsuccessfully inCisco IP Phone7841 when it isin Shared Linevia SIP Trunk

Call Transferby 7841when it is inShared Linevia SIP Trunk





Verify whetherthe transferworkedsuccessfully inCisco IP Phone8865 when it isin Shared Linevia SIP Trunk

Call Transferby 8865when it is inShared Linevia SIP Trunk



Verify whetherthe transferworkedsuccessfully inCisco IP Phone7841 when it isin Shared Linevia CiscoUnified BorderElement

Call Transferby 7841when it is inShared Linevia CUBE



Verify whetherthe transferworkedsuccessfully inCisco IP Phone8865 when it isin Shared Linevia CiscoUnified BorderElement

Call Transferby 8865when it is inShared Linevia CUBE



Verify whetherthe caller IDworkedsuccessfully inCisco IP Phone8865 when it isin Shared Linevia ICT Trunk

Caller ID in8865 when itis in SharedLine via ICTTrunk


PassedNAVerify whetherDo Not Disturb(Call Reject) isworkedsuccessfully inCisco IP Phone7841 when it isShared Line

DND in 7841when it isShared Line




PassedNAVerify whetherDo Not Disturb(Call Reject) isworkedsuccessfully inCisco IP Phone8865 when it isShared Line

DND in 8865when it isShared Line


PassedNAVerify whetherDo Not Disturb(Call Reject) isworkedsuccessfully inCisco IP Phone7841 when it isShared Line viaSIP Trunk

DND in 7841when it isShared Linevia SIP Trunk



Verify whetherthe speed dialworkedsuccessfullyCisco IP Phone8841when it isShared Line viaSIP Trunk

Speed Dial in8841 when itis SharedLine via SIPTrunk



Verify whetherthe speed dialworked in CiscoIP Phone 8865when it isShared Line viaSIP Trunksuccessfully

Speed Dial in8865 when itis SharedLine via SIPTrunk


PassedIP Phone B -> Unified CM -> IPPhone C ; IP Phone A -> UnifiedCM -> IP Phone C

Verify whethercall back toastmessage need todisplay in CiscoIP Phone 7841when it is inShared Linesuccessfully

Call back in7841 when itis SharedLine



Pass if the callpark reversion isworked in CiscoIP Phone 7841successfully

Call ParkReversion in7841





Verify whethercall parkreversion isworked in CiscoIP Phone 8865successfully

Call ParkReversion in8865



Verify whetherabbreviated dialis display inCisco IP Phone8865 when it isShared Linesuccessfully

AbbreviatedDial in 8865when it isShared Line



Verify whethercall istransferred inCisco IP Phone7841 when it isin Shared Linesuccessfully

Call Transferin 7841 whenit is SharedLine



Verify whethercall istransferred inCisco IP Phone8841 when it isin Shared Linesuccessfully

Call Transferin 8841 whenit is SharedLine



Verify whethercall transfer inCisco IP Phone7841 has callerID with specialcharactersuccessfully

Call Transferin 7841 hascaller IDwithspecialcharacter



Verify whethercall transfer inCisco IP Phone8865 has callerID with specialcharactersuccessfully

Call Transferin 8865 hascaller IDwithspecialcharacter




PassedIP Phone A -> VCS-E -> VCS-C-> Unified CM -> VCS-C ->VCS-E -> IP Phone B -> VCS-E-> VCS-C -> Unified CM ->VCS-C -> VCS-E -> IP Phone C

Verify whetherthe call isestablished andcall transfer isworkedsuccessfully inCisco IP Phone7841 afterregisteredthroughCollaborationEdgewhenVCS-E primarydown

Call madefrom first lineof IP PhoneA to secondline of 7841and does calltransfer whileregisteredthrough CEwhenVCS -Eprimarydown


PassedIP Phone A -> VCS-E -> VCS-C-> Unified CM -> VCS-C ->VCS-E -> IP Phone B ->VCS-E-> VCS-C -> Unified CM ->VCS-C -> VCS-E -> IP Phone C

Verify whetherthe call isestablished andconsult transferis workedsuccessfully inCisco IP Phone8865 afterregisteredthroughCollaborationEdgewhenVCS-E primarydown

Call madefrom first lineof IP PhoneA to secondline of 8865and doesconsulttransfer whileregisteredthrough CEwhenVCS -Eprimarydown


PassedIP Phone A -> VCS-E -> VCS-C-> Unified CM -> VCS-C ->VCS-E -> IP Phone B->VCS-E-> VCS-C -> Unified CM ->VCS-C -> VCS-E -> IP Phone C


Call madefrom first lineof 8841 tosecond line of7861and doesconsulttransfer whileregisteredthrough CEwhenVCS -Eprimarydown






Call madefrom first lineof 8865 tosecond line of8841and doesconsulttransfer whileregisteredthrough CEwhenVCS -Eprimarydown



Verify whetherconference isoccurredsuccessfully inCisco IP Phone7861 and CiscoIP Phone 8865after registeredthroughCollaborationEdgewhenVCS-E primarydown

Callconference in7861 afterregisteredthrough CEwhenVCS -Eprimarydown



Verify whethercall istransferred inCisco IP Phone7841 afterregisteredthroughCollaborationEdgewhenVCS-E primarydownsuccessfully

Call Transferin 7841 whenit is in SharedLine afterregisteredthrough CEwhenVCS -Eprimarydown





Verify whethercaller ID withspecial characteris display inCisco IP Phone8865 afterregisteredthroughCollaborationEdgewhenVCS-E primarydownsuccessfully

Caller IDwith specialcharacter in8865 afterregisteredthrough CEwhenVCS -Eprimarydown



Verify whetherCall ForwardAll is worked inCisco IP Phone8865 afterregisteredthroughCollaborationEdge VCS-Eprimary downsuccessfully

Enable CFAin 8865whileregisteredthrough CEwhen VCS-Eprimarydown



Verify whetherblind transfer isworked in CiscoIP Phone 7861after registeredthroughCollaborationEdge whenVCS-Csecondary downsuccessfully

Blind transferin 7861 afterregisteredthrough CEwhen VCS-Csecondarydown



Verify whetherblind transfer isworked in CiscoIP Phone 8865after registeredthroughCollaborationEdge whenVCS-Csecondary downsuccessfully

Blind transferin 8865 afterregisteredthrough CEwhen VCS-Csecondarydown





Verify whetherconsult transferis worked inCisco IP Phone7841 afterregisteredthroughCollaborationEdge whenVCS-Csecondary downsuccessfully

ConsultTransfer in7841 afterregisteredthrough CEwhen VCS-Csecondarydown


PassedIP Phone A -> VCS-E -> VCS-C-> Unified CM -> VCS-C ->VCS-E -> IP Phone B

Verify whetherspeed dial BusyLamp Field isworked in CiscoIP Phone 7861after registeredthroughCollaborationEdge whenVCS-E primarydownsuccessfully

Speed dialBLF in 7861afterregisteredthrough CEwhen VCS-Eprimarydown




Speed dialBLF in 8865afterregisteredthrough CEwhen VCS-Eprimarydown




Speed dialBLF in firstline of 7841to second lineof 7861 afterregisteredthrough CEwhen VCS-Eprimarydown






Speed dialBLF in thirdline of 8841to second lineof 8865 afterregisteredthrough CEwhen VCS-Eprimarydown



Verify whetherspeed dial BusyLamp Field isworked in CiscoIP Phone 8865and Cisco IPPhone 8841after registeredthroughCollaborationEdge whenVCS-E primarydownsuccessfully

Speed dialBLF in fourthline of 8865to second lineof 8841 afterregisteredthrough CEwhen VCS-Eprimarydown



Verify whetherspeed dial BusyLamp Field isworked in CiscoIP Phone 8865and Cisco IPPhone 7861after registeredthroughCollaborationEdge whenVCS-E primarydownsuccessfully

Speed dialBLF in firstline of 8865to fourth line7861afterregisteredthrough CEwhen VCS-Eprimarydown




PassedIP Phone A -> VCS-E -> VCS-C-> Unified CM -> VCS-C ->VCS-E -> IP Phone B ->UnifiedCM -> VCS-C -> VCS-E -> IPPhone C

Verify whetherthe DirectedCall Park issuccessful inCisco IP Phone7861 afterregisteredthroughCollaborationEdge whenVCS-Csecondary downsuccessfully

Directed CallPark on 7861afterregisteredthrough CEwhen VCS-Csecondarydown


PassedIP Phone A -> VCS-E -> VCS-C-> Unified CM -> VCS-C ->VCS-E -> IP Phone B ->UnifiedCM -> VCS-C -> VCS-E -> IPPhone C

Verify whetherthe DirectedCall Park issuccessful inCisco IP Phone8841 afterregisteredthroughCollaborationEdge whenVCS-Csecondary downsuccessfully

Directed CallPark on 8841afterregisteredthrough CEwhen VCS-Csecondarydown


PassedIP Phone A -> VCS-E -> VCS-C-> Unified CM -> VCS-C ->VCS-E -> IP Phone B ; IP PhoneC -> Unified CM -> VCS-C ->VCS-E -> IP Phone A

Verify whetherthe DirectedCall Park inShared Line issuccessful inCisco IP Phone7861 afterregisteredthroughCollaborationEdgewhenVCS-E primarydownsuccessfully

Directed CallPark onShared Line7841 afterregisteredthrough CEwhenVCS -Eprimarydown




PassedIP Phone A -> VCS-E -> VCS-C-> Unified CM -> VCS-C ->VCS-E -> IP Phone B ; IP PhoneC -> Unified CM -> VCS-C ->VCS-E -> IP Phone A

Verify whetherthe DirectedCall Park inShared Line issuccessful inCisco IP Phone8865 afterregisteredthroughCollaborationEdgewhenVCS-E primarydownsuccessfully

Directed CallPark onShared Linein 8865 afterregisteredthrough CEwhenVCS -Eprimarydown


PassedIP Phone A -> VCS-E -> VCS-C-> Unified CM -> VCS-C ->VCS-E -> IP Phone B -> IPPhone C -> Unified CM ->VCS-C -> VCS-E -> IP PhoneD

Verify whetherthe DirectedCall Park thenconference issuccessfulbetween CiscoIP Phone 7861and Cisco IPPhone 8865after registeredthroughCollaborationEdge whenVCS-Csecondary downsuccessfully

Directed CallPark andconference in7861 afterregisteredthrough CEwhen VCS-Csecondarydown


PassedIP Phone A -> VCS-E -> VCS-C-> Unified CM -> VCS-C ->VCS-E -> IP Phone B -> IPPhone C -> Unified CM ->VCS-C -> VCS-E -> IP PhoneD

Verify whetherthe DirectedCall Park thenconference issuccessfulbetween CiscoIP Phone 8841and Cisco IPPhone 8865after registeredthroughCollaborationEdge whenVCS-Csecondary downsuccessfully

Directed CallPark andconference in8841 afterregisteredthrough CEwhen VCS-Csecondarydown




PassedIP Phone A -> Unified CM1->SIP Trunk -> Unified CM2 ->VCS-C -> VCS-E -> IP Phone B->Unified CM2 -> VCS-C ->VCS-E -> IP Phone C

Verify whetherthe blindtransfer issuccessful inCisco IP Phone7861 afterregisteredthroughCollaborationEdge whenVCS-E primarydownsuccessfully

Make intercluster Blindtransfer in7861 afterregisteredthrough CEwhen VCS-Eprimarydown


PassedIP Phone A -> Unified CM1->SIP Trunk -> Unified CM2->VCS-C -> VCS-E -> IP PhoneB -> Unified CM2 -> VCS-C ->VCS-E -> IP Phone C

Verify whetherthe blindtransfer issuccessful inCisco IP Phone8865 afterregisteredthroughCollaborationEdge whenVCS-E primarydownsuccessfully

Make intercluster Blindtransfer in8865 afterregisteredthrough CEwhen VCS-Eprimarydown


PassedIP Phone A -> Unified CM1 ->SIP Trunk -> Unified CM2 ->VCS-C -> VCS-E -> IP Phone B-> Unified CM 2 ->VCS-C ->VCS-E -> IP Phone C

Verify whetherthe consulttransfer issuccessful inCisco IP Phone7861 afterregisteredthroughCollaborationEdge VCS-Eprimarysuccessfully

Make interclusterconsulttransfer in7861 afterregisteredthrough CEwhen VCS-Eprimarydown




PassedIP Phone A -> Unified CM1 ->SIP Trunk -> Unified CM2 ->VCS-C -> VCS-E -> IP Phone B-> Unified CM2 ->VCS-C ->VCS-E -> IP Phone C

Verify whetherthe consulttransfer issuccessful inCisco IP Phone8865 afterregisteredthroughCollaborationEdge VCS-Eprimarysuccessfully

Make interclusterconsulttransfer in8865 afterregisteredthrough CEwhen VCS-Eprimarydown


PassedIP Phone A -> Unified CM1 ->SIP Trunk -> Unified CM2 ->VCS-C -> VCS-E -> IP Phone B-> Unified CM2 -> VCS-C ->VCS-E -> IP Phone C

Verify whetherthe callconference issuccessful inCisco IP Phone7841 afterregisteredthroughCollaborationEdge whenVCS-Csecondary downsuccessfully

Make intercluster callconference in7841 afterregisteredthrough CEwhen VCS-Csecondarydown



Verify whetherhold and resumeis established inCisco IP Phone7861 afterregisteredthroughCollaborationEdge whenVCS-E primarydownsuccessfully

Hold andResume thecall in 7861afterregisteredthrough CEwhen VCS-Eprimarydown



Verify whetherhold and resumeis established inCisco IP Phone8865 afterregisteredthroughCollaborationEdge whenVCS-E primaryownsuccessfully

Hold andResume thecall in 8865afterregisteredthrough CEwhen VCS-Eprimarydown





Verify whethercall is parked inCisco IP Phone7861 afterregisteredthroughCollaborationEdge VCS-Eprimarysuccessfully

Call Park in7861afterregisteredthrough CEwhen VCS-Eprimarydown



Verify whethercall is parked inCisco IP Phone8851afterregisteredthroughCollaborationEdge VCS-Eprimarysuccessfully

Call Park in8851 afterregisteredthrough CEwhen VCS-Eprimarydown



Verify whethercall transfer inCisco IP Phone7861 afterregisteredthroughCollaborationEdge whenVCS-E primarydownsuccessfully

Call Transferin 7861afterregisteredthrough CEwhen VCS-Eprimarydown



Verify whethercall transfer inCisco IP Phone8865 afterregisteredthroughCollaborationEdge whenVCS-E primarydownsuccessfully

Call Transferin 8865 afterregisteredthrough CEwhen VCS-Eprimarydown





Verify whethercall transfer inCisco IP Phone7841afterregisteredthroughCollaborationEdge whenVCS-E primarydownsuccessfully

Call Transferin 7841 afterregisteredthrough CEwhen VCS-Eprimarydown


PassedIP Phone -> Unified CM -> ATAVerify whethercall made toCisco ATA issuccessful whenline1 and line2of Cisco ATAare in SharedLine

Make a callto ATA whenline1 andline2 of ATAare in SharedLine


PassedIP Phone -> Unified CM -> ATAVerify whethercall made fromCisco IP Phone8841 to line1 ofCisco ATA issuccessful, whenline1 of CiscoATA and CiscoUnified IPPhone 9971 arein Shared Line

Make a callfrom 8841 toline1 ofATA, whenline1 of ATAand 9971 arein SharedLine


PassedATA -> Unified CM -> IP PhoneVerify whethercall made fromline1 to line2 ofATA answercall in 8841 issuccessful, whenline2 of CiscoATA and CiscoIP Phone 8841are in SharedLine

Make a callline1 to line2of ATA,when line2 ofATA and8841 are inShared Line


PassedIP Phone -> Unified CM -> ATAVerify whetherspeed dial fromCisco IP Phone8861 to CiscoATA issuccessful

Make aSpeed dialcall from8861 to line1of ATA




PassedIP Phone -> Unified CM -> ATAVerify whetherspeed dial toCisco ATA fromCisco IP Phone8861 issuccessful whenline1 and line2of ATA are inShared Line

Make aSpeed dialcall from8861 to ATAwhen line1and line2 arein SharedLine


PassedIP Phone A -> Unified CM ->ATA -> Unified CM -> IP PhoneB

Verify whethercall forward allfrom Cisco ATAto Cisco IPPhone 8841 issuccessful

Call ForwardAll fromATA to 8841


PassedIP Phone -> Unified CM -> ATA-> Unified CM -> ATA

Verify whethercall forward allfrom Cisco ATAline1 to line2 issuccessful

Call ForwardAll fromATA line1 toline2


PassedIP Phone A -> Unified CM ->ATA ; IP Phone B -> UnifiedCM -> IP Phone C

Verify whethercall forwardbusy fromCiscoATA to Cisco IPPhone 8845 issuccessful

Call ForwardBusy fromATA to 8845



Verify whetherCall ForwardNoAnswer fromCisco ATA toCisco IP Phone8865 issuccessful

Call ForwardNo Answerfrom ATA to8865


PassedIP Phone -> Unified CM -> ATAVerify whethercall made toCisco ATA andhold & resumecall in CiscoATA withheadset issuccessful

Make a callto ATA andHold &Resume withheadset




PassedIP Phone -> Unified CM -> ATAVerify whethercall made toCisco ATA holdand resume callin Cisco IPPhone 8861withheadset issuccessful

Make a callto ATA andHold &Resume in8861 withheadset


PassedIP Phone A -> Unified CM1 ->SIP Trunk -> Unified CM2->ATA -> Unified CM2 - IPPhone B

Verify whethercall istransferred byCisco ATA toCisco IP Phone8845 issuccessful whenit is an activecall with CiscoIP Phone 8841for the callinitiated via SIPTrunk

Call transferby ATA to8845 when itis in activecall with8841 for thecall initiatedvia SIP Trunk


PassedIP Phone A -> Unified CM1 ->ICT Trunk -> Unified CM2->ATA -> Unified CM2 -> IPPhone B

Verify whethercall istransferred byCisco ATA toCisco IP Phone8865 issuccessful whenit is an activecall with CiscoIP Phone 8841for the callinitiated via ICTTrunk

Call transferby ATA to8865 when itis in activecall with8841 for thecall initiatedvia ICTTrunk


PassedIP Phone -> Unified CM -> ATAVerify whetherCaller ID isshowing inCisco IP Phone8845 issuccessful

Make a callfrom 8845 toATA both areassignedCaller ID




PassedIP Phone ->Unified CM1 -> ICTTrunk -> Unified CM2 -> ATA

Verify whetherCaller ID isshowing inCisco IP Phone8865 issuccessfullywhen it is anactive call withCisco ATA forthe call initiatedvia ICT Trunk

Make a callto ATA withCaller ID forthe callinitiated viaICT Trunk


PassedIP Phone -> Unified CM1 -> SIPTrunk -> Unified CM2 - ATA

Verify whetherCaller ID isshowing inCisco IP Phone8865 issuccessfullywhen it is anactive call withCisco ATA forthe call initiatedvia SIP Trunk

Make a callto ATA withCaller ID forthe callinitiated viaSIP Trunk



Verify whetherCall ForwardAll from CiscoATA to Cisco IPPhone 8841 andit showingCaller IDsuccessfully

Call ForwardAll fromATA to 8841with CallerID



Verify whetherCall ForwardNoAnswer fromCisco ATA toCisco IP Phone8845 ,afterconnecting callit is showingCaller IDsuccessfully

Call ForwardNo Answerfrom ATA to8845 withCaller D


PassedATA -> Unified CM -> IP PhoneVerify whetheruser able toredial the mostrecently dialedcall from CiscoATA to Cisco IPPhone 8865 issuccessfully

Make a redialcall fromATA usingmost recentcalls




PassedATA -> Unified CM1 -> ICTTrunk -> Unified CM2 -> IPPhone

Verify whetheruser able toredial the mostrecently dialedcall from CiscoATA to Cisco IPPhone 8845 issuccessfully forthe call initiatedvia ICT Trunk

Make a redialcall fromATA usingmost recentcalls for thecall initiatedvia ICT trunk


PassedATA -> Unified CM1 -> SIPTrunk -> Unified CM2 -> IPPhone

Verify whetheruser able toredial the mostrecently dialedcall from CiscoATA to Cisco IPPhone 8845 issuccessfully forthe call initiatedvia SIP Trunkvia SIP Trunk

Make a redialcall by ATAusing mostrecent callsfor the callinitiated viaSIP Trunk


Cisco Unified Survivable Remote Site TelephonyDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedIP Phone A -> Unified SRST-> IP Phone B -> UnifiedSRST -> IP Phone C

Verify whether theCall Forward Allfrom Cisco IP Phone7821 to Cisco IPPhone 7841 isworking properlyduring Unified CMfallback mode

CFA from 7821to 7841 duringUnified CMfallback mode

UCJ11.1S.SRST.G.001

PassedIP Phone B-> Unified SRST-> IP Phone A

Verify the call waitingis working properly inCisco IP Phone 7821during Unified CMfallback mode

Call Waiting in7821 duringUnified CMfallback mode

UCJ11.1S.SRST.G.002

PassedIP Phone A -> Unified SRST-> IP Phone B

Verify whether theCaller ID for Cisco IPPhone 7821 showingin Hiragana duringUnified CM fallbackmode

Caller ID inHiragana for7821 duringUnified CMfallback mode

UCJ11.1S.SRST.G.003


Test Results SummaryCisco Unified Survivable Remote Site Telephony


Verify whether theCaller ID in Cisco IPPhone 7841 isshowing in Kanjiduring Unified CMfallback mode

Caller ID inKanji for 7841during UnifiedCM fallbackmode

UCJ11.1S.SRST.G.004


Verify whether theCisco IP Phone 7861is able to join theexisting conference ofCisco IP Phone7821/41 successfullyin Unified CMfallback mode

Add 7861participant intoexistingconference of7821/41 duringUnified CMfallback mode

UCJ11.1S.SRST.G.005


Verify whether theconference betweenCisco IP Phone 7821and Cisco IP Phone7841 is working fineduring Unified CMfallback mode

Conferencebetween 7821,7841 and 7861during UnifiedCM fallbackmode

UCJ11.1S.SRST.G.006


Verify whether theparticipant is removedfrom Cisco IP Phone7841 successfullyfrom the conferenceof Cisco IP Phone78xx during UnifiedCM fallback mode

Removeparticipant from7841 in theconference of78xx duringUnified CMfallback mode

UCJ11.1S.SRST.G.007


Verify whether theDoNot Disturb ringeroff is workingproperly in Cisco IPPhone 78xx inUnified SRST mode

DND ringer offfor 78xx inUnified CMfallback mode

UCJ11.1S.SRST.G.008

PassedNAVerify whether theDo Not Disturb rejectis working properly inUnified CM IP Phone78xx inUnified SRSTmode

DND call rejectfor 78xx inUnified CMfallback mode

UCJ11.1S.SRST.G.009


Verify whether thehold and resume inCisco IP Phone 78xxis working properlyduring Unified CMfallback mode

Hold andResume in 78xxduring UnifiedCM fallbackmode

UCJ11.1S.SRST.G.010



PassedNAVerify whether theCisco IP Phone 7841is able to joinsuccessfully for theShared Line betweenCisco IP Phone 7821and Cisco IP Phone7861 during the SRSTfall back mode

Join from 7841for the SharedLine between7821 and 7861during SRSTfall back mode

UCJ11.1S.SRST.G.011


Verify whether theconsult transfer fromCisco IP Phone 7821to Cisco IP Phone7841 is workingproperly duringUnified CM fallbackmode

Consult Transferfrom 7821 to7841 duringUnified CMfallback mode

UCJ11.1S.SRST.G.012


Verify that Cisco IPPhone 7821 makescall to 7861 Cisco IPPhone and call getsestablishedsuccessfully inUnified CM fallbackmode

Callestablishmentbetween two78xx duringUnified CMfallback mode

UCJ11.1S.SRST.G.013


Verify that callwaiting notificationviewed in 7841 CiscoIP Phone successfullyduring Unified CMfallback mode

Make call from7821 to 7841call waitingduring UnifiedCM fallbackmode

UCJ11.1S.SRST.G.014


Verify whether the7841 Cisco IP Phonedoes consult transferwith Cisco IP Phone7861 with in UnifiedSRST successfullyduring Unified CMfallback mode

Transfer the callfrom 7841 to7861 withinUnified SRSTduring UnifiedCM fallbackmode

UCJ11.1S.SRST.G.015


Verify whether theparticipant is removedfrom Cisco IP Phone8841 successfullyfrom the conferenceof Cisco IP Phones8851/61 during SRSTfall back mode

Removeparticipant from8841 in theconference of8851/61 duringUnified CMfallback mode

UCJ11.1S.SRST.G.016




Verify whether theCisco IP Phone 8841able to join theexisting conference ofCisco IP Phones8851/61 successfullyin Unified CMfallback mode

Add 8841Participant intoexistingconference of8851/61 duringUnified CMfallback mode

UCJ11.1S.SRST.G.017


Verify whether theconsult transfer fromCisco IP Phone 8851to Cisco IP Phone8861 is workingproperly duringUnified CM fallbackmode

Consult transferfrom 8851 to8861 duringUnified CMfallback mode

UCJ11.1S.SRST.G.018

PassedNAVerify whether CiscoIP Phone 8861 able toJoin successfully forthe shared linebetween Cisco IPPhone 8841 andCiscoIP Phone 8851 duringthe Unified CMfallback mode

Join from 8861for the SharedLine between8841 and 8851during UnifiedCM fallbackmode

UCJ11.1S.SRST.G.019


Verify whether theDoNot Disturb ringeroff is workingproperly in Cisco IPPhone 88xx inUnified CM fallbackmode

DND ringer offfor 88xx inUnified CMfallback mode

UCJ11.1S.SRST.G.020


Verify whether theconference betweenCisco IP Phone8851,8861 Cisco IPPhone 8841 isworking fine duringUnified CM fallbackmode

Conferencebetween 8851,8861 and 8841during UnifiedCM fallbackmode

UCJ11.1S.SRST.G.021

PassedIP Phone B -> Unified SRST-> IP Phone A -> UnifiedSRST -> IP Phone C

Verify whether theCall Forward Allfrom Cisco IP Phone8841 Line 4 to CiscoIP Phone 8861 Line 4is working properlyduring Unified CMfallback mode

CFA from 8841Line 4 to 8861Line 4 duringUnified CMfallback mode

UCJ11.1S.SRST.G.022




Verify whether callcan be made fromCisco IP Phone 88xxduring Unified CMfallback modesuccessfully

Make a basiccall in 88xxduring UnifiedCM fallbackmode

UCJ11.1S.SRST.G.323


Verify whether redialcan be made in IPPhone during UnifiedCM fallback modesuccessfully

Redial the call inIP Phone duringUnified CMfallback mode

UCJ11.1S.SRST.G.328

PassedIP Phone A -> Unified SRST(CME SRST) -> IP Phone B

Verify whether CiscoUnified IP Phone B isable to park andretrieve the call inCME SRST modesuccessfully

Call park inCME SRSTmode

UCJ11.1S.SRST.G.950

PassedIP Phone A -> Unified SRST(CME SRST) -> IP Phone B-> Unified SRST (CMESRST) -> IP Phone C

Verify whether CiscoUnified IP Phone Amakes call to CiscoUnified IP Phone Band IP Phone B isable to transfer thecall successfully inCME SRST mode

Call Transfer inCME SRSTmode

UCJ11.1S.SRST.G.951

PassedIP Phone A -> Unified SRST(CME SRST) -> IP Phone B-> Unified SRST (CMESRST) -> IP Phone C

Verify whether callforward is enabledsuccessfully in CiscoUnified IP Phone Band Cisco Unified IPPhone C attends theincoming call from IPPhone A in CMESRST modesuccessfully

Call Forward inCME SRSTmode

UCJ11.1S.SRST.G.952


Verify that CiscoUnified IP Phone Bpresent in the Huntgroup answers theincoming call fromCisco Unified IPPhone A usinglongest-idle algorithm

Hunt groupusinglongest-idlealgorithm inCME SRSTmode

UCJ11.1S.SRST.G.953




Verify that CiscoUnified IP Phone Bpresent in the Huntgroup answers theincoming call fromCisco Unified IPPhone A usingparallel algorithm

Hunt groupusing parallelalgorithm inCME SRSTmode

UCJ11.1S.SRST.G.954

PassedIP Phone B -> Unified SRST(CME SRST) -> IP Phone C

Verify that CiscoUnified IP Phone Cpresent in the Huntgroup answers theincoming call fromCisco Unified IPPhone B usingsequential algorithm

Hunt groupusing sequentialalgorithm inCME SRSTmode

UCJ11.1S.SRST.G.955

PassedIP Phone A -> Unified SRST(CME SRST) -> Hunt PilotNumber -> IP Phone B ->Unified SRST (CME SRST)-> IP Phone C

Verify that CiscoUnified IP Phone Bpresent in the huntgroup answers the calland transfers the callsuccessfully to CiscoUnified IP Phone C

Call Transfer byIP Phone Bpresent in theHunt group

UCJ11.1S.SRST.G.956


Verify whether CiscoUnified IP Phone B isable to Hold andResume the incomingcall from CiscoUnified IP Phone Asuccessfully

Hold/Resumethe call by IPPhone B inCME SRSTmode

UCJ11.1S.SRST.G.957

Cisco Jabber for iPhone and iPadDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedCJW1 -> Unified CM -> CJI1 ->Unified CM -> CJI2 -> UnifiedCM -> CJW2

Verify whether theCisco Jabber foriPhone canestablishconsultative chaintransfersuccessfully

Consultativechain transferfrom CJI toCJW

UCJ11.1S.CJI.G.004


Test Results SummaryCisco Jabber for iPhone and iPad

PassedCJI -> Unified CM -> IP PhoneVerify whether theCisco Jabber foriPhone display theplaced call ofCisco IP Phone7841 namecorrectly in therecent logsuccessfully.

Placed calledname in recentlogs of CJI

UCJ11.1S.CJI.G.005

PassedDX80 -> Unified CM -> CJIVerify whetherCisco Jabber foriPhone can able toreceive a call fromDX80successfully

Make a callfrom DX80 toCJI

UCJ11.1S.CJI.G.006

PassedDX80 -> Unified CM -> CJIVerify whetherCisco Jabber foriPhone can able toHold and Resumethe call multipletimes successfully

Hold andResumemultiple timeswhen callbetween DX80and CJI

UCJ11.1S.CJI.G.017

PassedIP Phone -> Unified CM -> CJIVerify whetherCisco Jabber foriPhone get callnotificationsuccessfully whenin the shared linewith Cisco IPPhone 8841.

Call notificationin CJI whenshared the sameDN with IPPhone

UCJ11.1S.CJI.G.018

PassedIP Phone -> UnifiedCM->MX100-> Unified CM ->CJI

Verify whethercall transfer in CJIfrom MX100successfully

Call transferbetween MX100 to CJI

UCJ11.1S.CJI.G.019

PassedNAVerify whetherCisco Jabber foriPhone get groupchat invite fromthe Cisco Jabberfor Macsuccessfully

Make a Groupchat from Macto CJI

UCJ11.1S.CJI.G.020

PassedCJI -> Unified CM->CJAVerify whetherCisco Jabber foriPhone can initiatea call duringgroup chat

Make a callfrom CJI duringGroup chat toCJA

UCJ11.1S.CJI.G.021



PassedIP Phone A -> Unified CM -> IPPhone B -> Unified CM -> CJI

Verify whetherCisco Jabber foriPhone can able topark thetransferred callfrom Cisco IPPhone 8841successfully

Park thetransferred callfrom 8841 inCJI

UCJ11.1S.CJI.G.022

PassedIP Phone A -> Unified CM A ->SIP Trunk -> Unified CM B ->IP Phone B -> Unified CM B ->CJI

Verify whetherCisco Jabber foriPhone can able topark thetransferred callfrom Cisco IPPhone 8841 viaSIP Trunksuccessfully

Park thetransferred callfrom 8841 inCJI via SIPTrunk.

UCJ11.1S.CJI.G.023

PassedCJI1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJI2 -> VCS-E -> VCS-C ->Unified CM -> CJA1

Verify whether thecall transfer fromCisco Jabber foriPhone to CiscoJabber forAndroidsuccessful duringVCS-E primary isdown

Call transferfrom CJI1 toCJA1 whenVCS-E primaryis down

UCJ11.1S.CJI.G.001

PassedCJW1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJI1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJI2 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJW2

Verify whether thechain transfer issuccessful inCisco Jabber foriPhone when callmade viaCollaborationEdge duringVCS-E primary isdown

Chain transferfrom CJI whenVCS-E primaryis down

UCJ11.1S.CJI.G.002

PassedCJW1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJI1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJI2

Verify whether theconsultative calltransfer fromCisco Jabber foriPhone1 to CiscoJabber for iPhone2is successful whencall made viaCollaborationEdge duringVCS-E primary isdown

Consultativetransfer the callfrom CJI1 toCJI2 whenVCS-E primaryis down

UCJ11.1S.CJI.G.003



PassedCJI1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJI2

Verify whether thevideo call madebetween CiscoJabber for iPhone1and Cisco Jabberfor iPhone2 issuccessful whenmaking video callvia CE duringVCS-E primary isdown & VCS-Csecondary is down

Make video callbetween CJI1and CJI2 via CEwhen VCS-Eprimary &VCS-Csecondary isdown

UCJ11.1S.CJI.G.005

PassedCJI1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJI2

Verify Hold andResume the call inCisco Jabber foriPhone formultiple times viaCE during VCS-Eprimary is down

Hold andResume the callin CJI formultiple timeswhen call madevia CE

UCJ11.1S.CJI.G.014

PassedNAVerify whether thegroup chatinitiated fromCisco Jabber foriPhone1 to CiscoJabber for iPhone2and Cisco Jabberfor Android1 issuccessful viaCollaborationEdge, duringVCS-E primary isdown

Initiate GroupChat from CJIvia CE whenVCS-E primaryis down

UCJ11.1S.CJI.G.016

PassedNAVerify whetherCisco Jabber foriPhone can joinedthe group chatwith Cisco Jabberfor Macsuccessfully viaCollaborationEdge, duringVCS-E primary isdown

Accept a GroupChat from CJMin CJI via CEwhen VCS-Eprimary is down

UCJ11.1S.CJI.G.017



PassedNAVerify whetherCisco Jabber foriPhone cantransfer filesuccessfully viaCollaborationEdge, duringVCS-E primary &VCS-C secondaryis down

Transfer a filebetween CJI toCJA via CEwhen VCS-Eprimary andVCS-Csecondary down

UCJ11.1S.CJI.G.018

PassedCJI1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJA

Verify WhetherCisco Jabber forAndroid canresume a call onhold when inshared line via CE

Hold a call inCJI and resumea call in CJAwhen in sharedline

UCJ11.1S.CJI.G.019

PassedNAVerify Whetherthe Cisco Jabberfor iPhone cannotable to join acreated group chatsuccessfully.

Create andDelete a Groupchat beforemembers joinedin a group

UCJ11.1S.CJI.G.020

PassedCJIPad1 -> Unified CM ->CJIPad2 -> Unified CM -> CJA1

Verify whether thecall transfer fromCisco Jabber foriPad to CiscoJabber forAndroid issuccessfully

Make a calltransfer fromCJIPad2 toCJA1

UCJ11.1S.CJIPad.G.001

PassedCJW1 ->Unified CM ->CJIPad1-> Unified CM -> CJIPad2 -> ->Unified CM -> CJW2

Verify whether theCisco Jabber foriPad can establishchain transfersuccessfully

Make a chaintransfer fromCJIPad


PassedCJW1 ->Unified CM ->CJIPad1-> Unified CM -> CJIPad2

Verify whether theconsultative calltransfer fromCisco Jabber foriPad1 to CiscoJabber for iPad2successfully

Consultativetransfer fromCJIPad1 toCJIPad2




PassedCJIPad -> Unified CM -> CJWVerify whetherCisco Jabber foriPad can establisha call to CiscoJabber forWindowssuccessfully

Video callbetween CJIPadto CJW


PassedIP Phone -> Unified CM ->CJIPad

Verify whetherCisco Jabber foriPad able to parkthe incoming callfrom Cisco IPPhone 8841Successfully

Place aincoming callon park inCJIPad


PassedIP Phone -> Unified CM A ->SIP Trunk -> Unified CM B ->CJIPad

Verify whetherCisco Jabber foriPad can able topark the incomingcall from Cisco IPPhone 8841 viaSIP Trunksuccessfully.

Place aincoming callon park inCJIPad via SIPTrunk.


PassedNAChecking theJabber canconnectautomaticallywhen network isavailable inmobile clients

CJIPad canconnectautomaticallywhen networkavailable


PassedCJIPad -> Unified CM -> DX80Verify "on call"presence status inJabber clientswhile establishinga video call

Make a call tovideo end pointsand check thepresence statusof the CJIPad


PassedCJW1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJIPad1 -> VCS-E -> VCS-C-> Unified CM -> VCS-C ->VCS-E -> CJIPad2 -> VCS-E ->VCS-C ->Unified CM ->VCS-C-> VCS-E -> CJW2

Verify whether theconsultative chaintransfer fromCisco Jabber foriPad when callmade viaCollaborationEdge duringVCS-E primary isdown

Consultativechain transferfrom CJIPadwhen VCS-Eprimary is down




PassedCJIPad1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJIPad2

Verify whether thevideo call madebetween CiscoJabber for iPad1and Cisco Jabberfor iPad2 issuccessfullyduring VCS-Eprimary is downin CollaborationEdge

Make video callbetweenCJIPad1 andCJIPad2 via CEwhen VCS-Eprimary is down


PassedCJW1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJIPad1 -> VCS-E -> VCS-C-> Unified CM -> VCS-C ->VCS-E -> CJIPad2

Verify whether thecall made viaCollaborationEdge is held andresumed backsuccessfully inCisco Jabber foriPad1 when itshares the sameDN with CiscoJabber for iPad2,during VCS-Eprimary is down

Hold andResume thevideo call inCJIPad when inShared Line


PassedCJW1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJIPad1 -> VCS-E -> VCS-C-> Unified CM -> CJIPad2

Verify whether thecall transfer fromCisco Jabber foriPad is successfulwhen it shares thesame DN withCisco Jabber foriPad and duringVCS-E primary isdown

Call transferfrom CJIPadwhen in SharedLine and whenVCS-E primaryis down


PassedCJW1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJIPad1 -> VCS-E -> VCS-C-> Unified CM -> CJIPad2 ->VCS-C ->VCS-E ->Unified CM-> CJW2

Verify whether thechain call transferfrom Cisco Jabberfor iPad issuccessful when itshares the sameDN with CiscoJabber for iPadand duringVCS-Eprimary is down

Chain calltransfer fromCJIPad when inShared Line andwhen VCS-Eprimary is down




PassedCJW1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJIPad1 -> VCS-E -> VCS-C-> Unified CM -> CJIPad2

Verify whether theconsultative calltransfer fromCisco Jabber foriPad is successfulwhen it shares thesame DN withCisco Jabber foriPad and duringVCS-E primary isdown

Consultativecall transferfrom CJIPadwhen in SharedLine and whencall made viaCE, and whenVCS-E primaryis down


PassedCJW1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJIPad1 -> VCS-E -> VCS-C-> Unified CM -> CJIPad2 ->VCS-C ->VCS-E ->Unified CM-> CJW2

Verify whether theconsultative chaintransfer fromCisco Jabber foriPad is successfulwhen it shares thesame DN withCisco Jabber foriPad and when thecall has made viaCollaborationEdge and duringVCS-E primary isdown

Consultativechain transferfrom CJIPadwhen in SharedLine and duringVCS-E primaryis down


PassedCJIPad1 -> VCS-E -> VCS-C ->Unified CM ->VCS-C ->VCS-E-> CJIPad2

Verify whether thecall park canestablish in CiscoJabber for iPadduring VCS-Eprimary is downwhenCisco Jabberfor IPad 1 andCisco Jabber foriPad2 in sharedline

Call Park atCJIPad duringVCS-E primaryis down


PassedNAVerify whether theemoticons are sentsuccessfullyduring chat inCisco Jabber foriPad viaCollaborationEdge, duringVCS-E primary &VCS -C secondaryis down

Send emoticonsduring chat inCJIPad via CE




PassedNAVerify whetherCisco Jabber foriPad can abletransfer a file toCisco Jabber forAndroidsuccessfullyduring VCS-Eprimary is down.

Transfer a filebetween CJIPadto CJA


Cisco Jabber for AndroidDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedCJI1 -> Unified CM -> CJA1 ->Unified CM -> CJI2

Verify whetherthe call transferfrom CiscoJabber forAndroid1 toCisco Jabber foriPhone2 issuccessfully

Call transferfrom CJA1 toCJI2

UCJ11.1S.CJA.G.001

PassedCJW1 -> Unified CM -> CJA1 ->Unified CM -> CJA2 -> UnifiedCM -> CJW2

Verify whetherthe chaintransfer fromCisco Jabber forAndroid toCisco Jabber forWindowssuccessfully

Chain transferfrom CJA

UCJ11.1S.CJA.G.002

PassedCJW1 -> Unified CM -> CJA1 ->Unified CM -> CJA2

Verify whetherthe consultativetransfer fromCisco Jabber forAndroid1 toCisco Jabber forAndroid2 issuccessfully

Consultativetransfer fromCJA1 to CJA2

UCJ11.1S.CJA.G.003

PassedCJW1 -> Unified CM -> CJA1 ->Unified CM -> CJA2 -> UnifiedCM -> CJW2

Verify whetherthe consultativechain transferfrom CiscoJabber forAndroid issuccessfully

Consultativechain transferfrom CJA

UCJ11.1S.CJA.G.004


Test Results SummaryCisco Jabber for Android

PassedCJA1 -> Unified CM -> CJA2Verify whetherduring call holdin Cisco Jabberfor Android thevideo get pausedsuccessfully

Video displaystatus whilehold in CJA

UCJ11.1S.CJA.G.005

PassedCJA -> Unified CM -> IP PhoneVerify the CiscoJabber forAndroid displaythe placed callof Cisco IPPhone 7841name correctlyin the recent log.

Placed callname in recentlogs of CJA

UCJ11.1S.CJA.G.006

PassedDX80 -> Unified CM -> CJAVerify whetherCisco Jabber forAndroid canable to receive acall from CiscoDX80successfully

Call fromDX80to CJA

UCJ11.1S.CJA.G.007

PassedIP Phone -> Unified CM -> CJAVerify whetherJabber forAndroid able topark theincoming callfrom Cisco IPPhone 8841Successfully

Park theincoming callfrom IP Phonein Jabber forAndroid

UCJ11.1S.CJA.G.008

PassedCJA -> Unified CM -> DX 80Verify thepresence status"On a call"displayed inJabber forAndroidsuccessfully

Make a call tovideo end pointsand check thepresence statusof the CJA

UCJ11.1S.CJA.G.009

PassedCJA -> Unified CM -> DX 80Verify the videohas stopped inthe Cisco Jabberfor Androidwhen the holdpressed in DX80

Hold andResume the callwith video endpoint and checkthe video status

UCJ11.1S.CJA.G.010



PassedCJA1 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJA2 -> VCS-E -> VCS-C ->Unified CM -> CJI1

Verify whetherthe call transferfrom CiscoJabber forAndroid toCisco Jabber foriPhonesuccessfullyduring VCS-Eprimary is down

Call transferfrom CJA1 toCJI1 whenVCS-E primaryis down

UCJ11.1S.CJA.G.011

PassedCJW1 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJA1 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJA2 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJW2

Verify whetherthe chaintransfer issuccessful inCisco Jabber forAndroid whencall made viaCollaborationEdge duringVCS-E primaryis down

Chain transferfrom CJAduring VCS-Eprimary is down

UCJ11.1S.CJA.G.012

PassedCJW1 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJA1 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJA2

Verify whetherthe consultativecall transferfrom CiscoJabber forAndroid1 toCisco Jabber forAndroid2 issuccessful whencall made viaCollaborationEdge duringVCS-E primaryis down

Consultativetransfer the callfrom CJA1 toCJA2 duringVCS-E primaryis down

UCJ11.1S.CJA.G.013

PassedCJW1 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJA1 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJA2 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJW2

Verify whetherthe consultativechain transfer issuccessful inCisco Jabber forAndroid whencall made viaCollaborationEdge duringVCS-E primaryis down

Consultativechain transferfrom CJAduring VCS-Eprimary is down

UCJ11.1S.CJA.G.014



PassedCJA1 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJA2

Verify whetherthe video callmade betweenCisco Jabber forAndroid1 andCisco Jabber forAndroid2 issuccessful whenmaking videocall viaCollaborationEdge duringVCS-E primaryis down

Make Video callbetween CJA1and CJA2 viaCE duringVCS-E primaryis down

UCJ11.1S.CJA.G.015

PassedCJW1 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJA1 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJA2

Verify whetherthe call made viaCollaborationEdge is held andresumed backsuccessfully inCisco Jabber forAndroid1 whenit shares thesame DN withCisco Jabber forAndroid2,during VCS-Cprimary is down

Hold andResume thevideo call inCJA when inShared Line

UCJ11.1S.CJA.G.016

PassedCJW1 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJA1 -> VCS-E -> VCS-C ->Unified CM -> CJA2

Verify whetherthe call transferfrom CiscoJabber forAndroid issuccessful whenit shares thesame DN withCisco Jabber foriPhone duringVCS-E primaryis down

Call transferfrom CJA whenin Shared Lineand duringVCS-E primaryis down

UCJ11.1S.CJA.G.017



PassedCJW1 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJA1 -> VCS-E -> VCS-C ->Unified CM -> CJA2 -> VCS-C ->VCS-E -> Unified CM -> CJW2

Verify whetherthe chain calltransfer fromCisco Jabber forAndroid issuccessful whenit shares thesame DN withCisco Jabber foriPhone duringVCS-E primaryis down

Chain Calltransfer fromCJA when inShared Line andduring VCS-Eprimary is down

UCJ11.1S.CJA.G.018

PassedCJW1 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJA1 -> VCS-E -> VCS-C ->Unified CM -> CJA2

Verify whetherthe consultativecall transferfrom CiscoJabber forAndroid issuccessful whenit shares thesame DN withCisco Jabber foriPhone duringVCS-E primaryis down

ConsultativeCall transferfrom CJA whenin Shared Lineand when callmade via CE,during VCS-Eprimary is down

UCJ11.1S.CJA.G.019

PassedCJW1 -> VCS-E -> VCS-C ->Unified CM -> VCS-C -> VCS-E-> CJA1 -> VCS-E -> VCS-C ->Unified CM -> CJA2 -> VCS-C ->VCS-E -> Unified CM -> CJW2

Verify whetherthe consultativechain transferfrom CiscoJabber forAndroid issuccessful whenit shares thesame DN withCisco Jabber foriPhone andwhen the callhas made viaCollaborationEdge duringVCS-E primaryis down

ConsultativeChain transferfrom CJA whenin Shared Lineduring VCS-Eprimary is down

UCJ11.1S.CJA.G.020

Cisco Jabber for WindowsDefectsStatusCall Component FlowDescriptionTitleLogical ID


Test Results SummaryCisco Jabber for Windows

PassedNAVerify whether CiscoJabber for Windows isable to login to Jabbersuccessfully whenVCS-E primary isdown

Login whenVCS-E primaryis down

UCJ11.1S.CJW.G.029

PassedNAVerify whether CiscoJabber for Windows isreceived the group chatinvite from CiscoJabber for Macsuccessfully whenVCS-E primary isdown

Group chatinvite isreceived whenVCS-E primaryis down

UCJ11.1S.CJW.G.005

PassedNAVerify whether CiscoJabber for Windowssend/receive group chatmessages successfullywhen VCS-E primaryis down

Receive groupchat messageswhen VCS-Eprimary is down

UCJ11.1S.CJW.G.009

PassedNAVerify whether CiscoJabber for Windowsreceive a file fromCisco Jabber forWindows during groupchat successfully whenVCS-E primary isdown

Receiving filefrom group chatwhen VCS-Eprimary is down

UCJ11.1S.CJW.G.013

PassedNAVerify whetheravailable status isdisplayed in CiscoJabber for Windowssuccessfully whenVCS-E primary isdown

Available statuswhen VCS-Eprimary is down

UCJ11.1S.CJW.G.017

PassedNAVerify whether do notdisturb status isdisplayed in CiscoJabber for Windowssuccessfully whenVCS-E primary isdown

Do not Disturbstatus whenVCS-E primaryis down

UCJ11.1S.CJW.G.025



PassedCJW1 -> VCS-E -> VCS-C-> Unified CM -> VCS-C-> VCS-E -> CJW2

Verify whether CiscoJabber forWindows1 isable to make a videocall to Cisco Jabber forWindows2 whenVCS-E primary isdown

Making videocall whenVCS-E primaryis down

UCJ11.1S.CJW.G.037


Verify whether theCisco Jabber forWindows1 holds thecall of Cisco Jabber forWindows2 whenVCS-E primary isdown and checkwhether the call is inconnected state

Connectedstatus of thehold call whenVCS-E primaryis down

UCJ11.1S.CJW.G.041


Verify whether theCisco Jabber forWindows1 resume thecall of Cisco Jabber forWindows2 whenVCS-E primary isdown and checkwhether the call is inconnected state

Call resumewhen VCS-Eprimary is down

UCJ11.1S.CJW.G.045

PassedCJW1 -> VCS-E -> VCS-C-> Unified CM -> VCS-C-> VCS-E -> CJW2 ->VCS-E -> VCS-C ->Unified CM -> VCS-C ->VCS-E -> CJM

Verify whether the callis in connected statewhen Cisco Jabber forWindows1 is inconference with CiscoJabber for Windows2and Cisco Jabber forMac when VCS-Eprimary is down

Status of theconference callwhen VCS-Eprimary is down

UCJ11.1S.CJW.G.049

PassedCJM -> VCS-E -> VCS-C-> Unified CM -> VCS-C-> VCS-E -> CJW1 ->VCS-E -> VCS-C ->Unified CM -> VCS-C ->VCS-E -> CJW2

Verify whether CiscoJabber forWindows1 isable to transfer the callto Cisco Jabber forWindows2 from CiscoJabber for Mac whenVCS-E primary isdown and checkwhether the call is inconnected state inCisco Jabber forWindows2

Connectedstatus of calltransfer in CJWwhen VCS-Eprimary is down

UCJ11.1S.CJW.G.053



PassedCJM -> VCS-E -> VCS-C-> Unified CM -> VCS-C-> VCS-E -> CJW1 ->VCS-E -> VCS-C ->Unified CM -> VCS-C ->VCS-E -> CJW2

Verify whether CiscoJabber forWindows1 isable to pick up thegroup call from CiscoJabber for Windows2successfully whenVCS-E primary isdown

Group callpickup in CJWwhen VCS-Eprimary is down

UCJ11.1S.CJW.G.058

PassedNAVerify whether CiscoJabber forWindows1 isable to receive screencapture from CiscoJabber for Windows2from P2P chat whenVCS-E primary isdown

Receivingscreen capturewhen VCS-Eprimary is down

UCJ11.1S.CJW.G.066

PassedNAVerify whether CiscoJabber forWindows1 isable to receive JPEGfile from Cisco Jabberfor Windows2 fromP2P chat when VCS-Eprimary is down

Receiving JPEGfile whenVCS-E primaryis down

UCJ11.1S.CJW.G.067

PassedNAVerify whether CiscoJabber for Windows isable to add CiscoJabber for Mac into thegroup group chatsuccessfully whenVCS-C primary isdown

Addingparticipant intogroup chat whenVCS-E primaryis down

UCJ11.1S.CJW.G.068

PassedNAVerify whether CiscoJabber for Windows1displays the alertmessage successfullywhen Cisco Jabber forWindows2 comesonline when VCS-Eprimary is down

Display useralert messagewhen desktopclient user isavailable whenVCS-E primaryis down

UCJ11.1S.CJW.G.069

PassedNAVerify whether CiscoJabber for Windowsdisplays the alertmessage successfullywhen Cisco Jabber forAndroid comes onlinewhen VCS-E primaryis down

Display useralert messagewhen mobileclient user isavailable whenVCS-E primaryis down

UCJ11.1S.CJW.G.070



PassedNAVerify whether CiscoJabber for Windows1displays the alertmessage successfullywhen Cisco Jabber forWindows2, CiscoJabber for Androidcomes online at sametime when VCS-Eprimary is down

Displaying alertmessage whentwo or moreusers becomeavailable atsame time whenVCS-E primaryis down

UCJ11.1S.CJW.G.071

PassedNAVerify whether CiscoJabber for Windows isable to send broadcastmessage to CiscoJabber for Android andCisco Jabber for Macfrom its contact listsuccessfully whenVCS-E primary isdown

Sendingbroadcastmessage fromthe contact listwhen VCS-Eprimary is down

UCJ11.1S.CJW.G.072

PassedNAVerify whether CiscoJabber for Windows isable to send broadcastmessage to a groupcreated already in itscontacts successfullywhen VCS-E primaryis down

Sendingbroadcastmessage to thegroup present incontacts whenVCS-E primaryis down

UCJ11.1S.CJW.G.073


Verify whether CiscoJabber forWindows1 isable to send broadcastmessage to a groupcreated already in itscontacts successfullyduring call with CiscoJabber for Windows2when VCS-E primaryis down

Sendingbroadcastmessage to thegroup present incontacts duringcall whenVCS-E primaryis down

UCJ11.1S.CJW.G.074

PassedNAVerify whether CiscoJabber for Windowscan able to customizethe presence statussuccessfully whenVCS-E primary isdown

Customize thepresence statusin CJW whenVCS-E primaryis down

UCJ11.1S.CJW.G.075



PassedNAVerify whether CiscoJabber for Windowscan able to delete thecustom statusessuccessfully whenVCS-E primary isdown

Delete thecustom status inCJW whenVCS-E primaryis down

UCJ11.1S.CJW.G.076

PassedCJM -> VCS-E -> VCS-C-> Unified CM -> VCS-C-> VCS-E -> CJW

Verify whether CiscoJabber for Windowsreceive the missed callnotification in therecents from CiscoJabber for Macsuccessfully whenVCS-E primary isdown

Receivingmissed callnotification inrecents in CJWwhen VCS-E isdown

UCJ11.1S.CJW.G.079

PassedNAVerify whether CiscoJabber for Windows isable to update thelocation successfullywhen VCS-E primaryis down

New locationupdate in CJWwhen VCS-Eprimary is down

UCJ11.1S.CJW.G.080


Verify whether CiscoJabber for Windows isable to share its screenduring call with CiscoJabber Macsuccessfully whenVCS-E primary isdown

Screen share inCJW whenVCS-E primaryis down

UCJ11.1S.CJW.G.081


Verify whether CiscoJabber for Windowschanges its status topresenting when itshares screen withCisco Jabber Macsuccessfully during callwhen VCS-E primaryis down

Presentingstatus of CJWduring screenshare whenVCS-E primaryis down

UCJ11.1S.CJW.G.082

Cisco Jabber for MacDefectsStatusCall Component

FlowDescriptionTitleLogical ID


Test Results SummaryCisco Jabber for Mac

PassedNAVerify whetherCisco Jabber forMac1 is able tosend/receivedesktop client URIlink of Cisco Jabberfor Windows in thechat window duringP2P chat with CiscoJabber for Mac2successfully

Send/Receivedesktop clientURI link in chatwindow duringP2P chat

UCJ11.1S.CJM.G.001

PassedNAVerify whetherCisco Jabber forMac1 is able tosend/receivemobileclient URI link ofCisco Jabber forAndroid in the chatwindow during P2Pchat with CiscoJabber for Mac2successfully

Send/Receivemobile clientURI link in chatwindow duringP2P chat

UCJ11.1S.CJM.G.002

PassedNAVerify whetherCisco Jabber forMac1 is able toinitiate P2P chatwith Cisco Jabberfor Android usingthe URI link whichis received fromCisco Jabber forMac2 during P2Pchat successfully

CJM initiatesP2P chat withmobile clientfrom the chatwindow usingURI link

UCJ11.1S.CJM.G.003

PassedNAVerify whetherCisco Jabber forMac1 is able toinitiate P2P chatwith Cisco Jabberfor Windows usingthe URI link whichis received fromCisco Jabber forMac2 during P2Pchat successfully

CJM initiatesP2P chat withdesktop clientfrom the chatwindow usingURI link

UCJ11.1S.CJM.G.004



PassedCJM -> Unified CM-> CJW

Verify whetherCisco Jabber forMac is able to sendthe URI link ofCisco Jabber forAndroid in the chatwindow during callwith Cisco Jabberfor Windowssuccessfully

Send mobileclient URI linkduring call

UCJ11.1S.CJM.G.005

PassedCJM -> Unified CM-> CJA

Verify whetherCisco Jabber forMac is able to sendthe URI link ofCisco Jabber forWindows in the chatwindow during callwith Cisco Jabberfor Androidsuccessfully

Receive desktopclient URI linkduring call

UCJ11.1S.CJM.G.006

PassedCJM1 -> Unified CM-> CJW

Verify whetherCisco Jabber forMac1 is able toinitiate a call withCisco Jabber forWindows from thechat window usingits URI link whichis received fromCisco Jabber forMac2 during P2Pchat successfully

CJM initiates acall to desktopclient from theP2P chatwindow usingURI link

UCJ11.1S.CJM.G.007

PassedCJM1 -> Unified CM-> CJA

Verify whetherCisco Jabber forMac1 is able toinitiate a call withCisco Jabber forAndroid from thechat window usingits URI link whichis received fromCisco Jabber forMac2 during P2Pchat successfully

CJM initiates acall to mobileclient from theP2P chatwindow usingURI link

UCJ11.1S.CJM.G.008



PassedNAVerify whetherCisco Jabber forMac is able toreceive mobileclient URI link ofCisco Jabber forAndroid in the chatwindow from CiscoJabber forWindowsduring group chatsuccessfully

Receive mobileclient URI linkduring groupchat

UCJ11.1S.CJM.G.014

PassedNAVerify whetherCisco Jabber forMac is able toreceive desktopclient URI link ofCisco Jabber forWindows in the chatwindow from CiscoJabber for Androidduring group chatsuccessfully

Receive desktopclient URI linkduring groupchat

UCJ11.1S.CJM.G.015

PassedCJM -> Unified CM-> CJW

Verify whetherCisco Jabber forMac is able toinitiate a desktopclient call of CiscoJabber forWindowsusing its URI linkfrom the group chatwindowsuccessfully

Initiate desktopclient call fromthe group chat

UCJ11.1S.CJM.G.016

PassedCJM -> Unified CM-> CJA

Verify whetherCisco Jabber forMac is able toinitiate a mobileclient call of CiscoJabber for Androidusing its URI linkfrom the group chatwindowsuccessfully

Initiate mobileclient call fromthe group chat

UCJ11.1S.CJM.G.017



PassedCJM -> Unified CM-> C90

Verify Cisco Jabberfor Mac is able tomake a call to C90during P2P chatwith Cisco Jabberfor Androidsuccessfully

Making a call toC90 from CJMduring P2P chatwith CJA

UCJ11.1S.CJM.G.020

PassedNAVerify whetherCisco Jabber forMac is able toreceive the URI linkof blocked userCisco Jabber forWindows in the chatwindow during P2Pchat with CiscoJabber for Mac2successfully

Receive URIlink of blockeduser during P2Pchat

UCJ11.1S.CJM.G.032

PassedCJM1 -> Unified CM-> CJW

Verify whetherCisco Jabber forMac1 is able toinitiate a call withCisco Jabber forWindows using thetel:DN which isreceived fromCiscoJabber for Mac2during P2P chatsuccessfully

Making a callusing tel:DN ofCJW

UCJ11.1S.CJM.G.060

PassedCJM1 -> Unified CM-> CJA

Verify whetherCisco Jabber forMac1 is able toinitiate a call withCisco Jabber forAndroid using thetel:DN which isreceived fromCiscoJabber for Mac2during P2P chatsuccessfully

Making a callusing tel:DN ofCJA

UCJ11.1S.CJM.G.061

PassedNAVerify whetherCisco Jabber forMac is able to loginto Jabbersuccessfully whenVCS-E primary isdown

Login whenVCS-E primaryis down

UCJ11.1S.CJM.G.129



PassedNAVerify whetherCisco Jabber forMac1 receive P2Pchat messages fromCisco Jabber forMac2 successfullywhen VCS-Eprimary is down

Receive P2Pchat messageswhen VCS-Eprimary is down

UCJ11.1S.CJM.G.101

PassedNAVerify whetherCisco Jabber forMac sent group chatinvite to CiscoJabber forWindows,CiscoJabber for Androidsuccessfully whenVCS-E primary isdown

Group chatinvite is sentfromCJMwhenVCS-E primaryis down

UCJ11.1S.CJM.G.105

PassedNAVerify whetherCisco Jabber forMac1 send/receivethe group chatmessages fromCisco Jabber forMac2 successfullywhen VCS-Eprimary is down

Send/Receivegroup chatmessages whenVCS-E primaryis down

UCJ11.1S.CJM.G.109

PassedNAVerify whetherCisco Jabber forMac receive a filefrom Cisco JabberforWindows duringgroup chatsuccessfully whenVCS-E primary isdown

Receiving filefrom group chatwhen VCS-Eprimary is down

UCJ11.1S.CJM.G.113

PassedNAVerify whetheraway status isdisplayed in theCisco Jabber forMac successfullywhen VCS-Eprimary is down

Away statuswhen VCS-Eprimary is down

UCJ11.1S.CJM.G.121



PassedCJM1 -> VCS-E ->VCS-C -> UnifiedCM -> VCS-C ->VCS-E -> CJM2

Verify whetherCisco Jabber forMac1 is able tomake a video call toCisco Jabber forMac2 when VCS-Eprimary is down

Making videocall whenVCS-E primaryis down

UCJ11.1S.CJM.G.137


Verify whether theCisco Jabber forMac1 holds the callof Cisco Jabber forMac2 when VCS-Eprimary is down andcheck whether thecall is in connectedstate

Connectedstatus of thehold call whenVCS-E primaryis down

UCJ11.1S.CJM.G.141


Verify whether theCisco Jabber forMac1 resume thecall of Cisco Jabberfor Mac2 whenVCS-E primary isdown and checkwhether the call isin connected state

Call resumewhen VCS-Eprimary is down

UCJ11.1S.CJM.G.145

PassedCJW -> VCS-E ->VCS-C -> UnifiedCM -> VCS-C ->VCS-E -> CJM1 ->VCS-E -> VCS-C ->Unified CM ->VCS-C -> VCS-E ->CJM2

Verify whether thecall is in connectedstate when CiscoJabber for Mac1 isin conference withCisco Jabber forMac2 and CiscoJabber forWindowswhen VCS-Eprimary is down

Status of theconference callwhen VCS-Eprimary is down

UCJ11.1S.CJM.G.149

PassedCJW -> VCS-E ->VCS-C -> UnifiedCM -> VCS-C ->VCS-E -> CJM1 ->VCS-E -> VCS-C ->Unified CM ->VCS-C -> VCS-E ->CJM2

Verify whether thecall is in connectedstate when CiscoJabber for Mac1transfers the call toCisco Jabber forMac2 from CiscoJabber forWindowswhen VCS-Eprimary is down

Status of calltransfer in CJMwhen VCS-Eprimary is down

UCJ11.1S.CJM.G.153



Cisco TelePresence Multipoint Control UnitDefectsStatusCall component flowDescriptionTitleLogical ID

PassedSX20 Quick Set-> Unified CM-> SX80Codec SX20Quick Set->Add -> Unified CM->MRGL->MCU5310->DX80->Hold/Resume

Verify whether thehold and resumefrom CiscoDX80,while in a callwith CiscoTelePresence SX20Quick Set and CiscoTelePresence SX80Codec by usingCisco TelePresenceMCU 5310 allregistered in CiscoUnifiedCommunicationsManager

Hold andresume theadhocconference callusing MCU5310 in DX80

UCJ11.1S.MCU.G.001

PassedSX20Quick Set ->Unified CM-> SX80Codec SX20Quick Set->Add-> UnifiedCM->MRGL->MCU 5310->MX200-G2 -> PresentationSharing

Verify whether thepresentation isshared from CiscoTelePresenceMX200-G2 ,while ina adhoc conferencecall with CiscoTelePresence SX20Quick Set and CiscoTelePresence SX80Codec by usingCisco TelePresenceMCU 5310 allregistered in CiscoUnifiedCommunicationsManager

Presentationsharing fromMX200-G2 inadhocconference callusing MCU5310

UCJ11.1S.MCU.G.002


Test Results SummaryCisco TelePresence Multipoint Control Unit

PassedSX20Quick Set ->Unified CM-> SX80Codec SX20Quick Set->Add-> UnifiedCM->MRGL->MCU 5310->MX300-G2 -> PresentationSharing

Verify whether thepresentation isshared from CiscoTelePresenceMX300-G2 ,while ina conference callwith CiscoTelePresence SX20Quick Set and CiscoTelePresence SX80Codec by usingCisco TelePresenceMCU 5310 allregistered in CiscoUnifiedCommunicationsManager

Presentationsharing fromMX300-G2 inadhocconference callusing MCU5310

UCJ11.1S.MCU.G.003

PassedSX20 Quick Set-> Unified CM-> SX80Codec SX20Quick Set->Add -> Unified CM->MRGL->MCU5310->MX200-G2->Hold/Resume

Verify whether thehold and resumefrom CiscoTelePresenceMX200-G2,while ina call with CiscoTelePresence SX20Quick Set and CiscoTelePresence SX80Codec by usingCisco TelePresenceMCU 5310 allregistered in Ciscounifiedcommunicationsmanager

Hold andresume theadhocconference callusing MCU5310 inMX200-G2

UCJ11.1S.MCU.G.004

PassedSX20 Quick Set-> Unified CM-> SX80Codec SX20Quick Set->Add -> Unified CM->MRGL->MCU5310->MX300-G2->Hold/Resume

Verify whether thehold and resumefrom CiscoTelePresenceMX300-G2,while ina call with CiscoTelePresence SX20Quick Set and CiscoTelePresence SX80Codec by usingCisco TelePresenceMCU 5310 allregistered in CiscoUnifiedCommunicationsManager

Hold andresume theadhocconference callusing MCU5310 inMX300-G2

UCJ11.1S.MCU.G.005



PassedSX20Quick Set ->Unified CM-> SX80Codec SX20Quick Set->Add-> UnifiedCM->MRGL->MCU 5310->DX70 -> Presentation Sharing

Verify whether thepresentation isshared from CiscoDX70,while in aconference call withCisco TelePresenceSX20 Quick Set andCisco TelePresenceSX80 Codec byusing CiscoTelePresence MCU5310 all registered inCisco UnifiedCommunicationsManager

Presentationsharing fromDX70 in adhocconference callusing MCU5310

UCJ11.1S.MCU.G.006

PassedSX20Quick Set ->Unified CM-> SX80Codec SX20Quick Set->Add-> UnifiedCM->MRGL->MCU 5310->Conference

Verify whether themeet me videoconference callusing CiscoTelePresence MCU5310 to CiscoTelePresence SX10Quick Set bothregistered in CiscoUnifiedCommunicationsManager

Initiate the meetme videoconference fromSX10 Quick Setusing CiscoMCU 5310

UCJ11.1S.MCU.G.007

PassedSX20Quick Set ->Unified CM-> SX80Codec SX20Quick Set->Add-> UnifiedCM->MRGL->MCU 5310->Integrator Package C90 ->Presentation Sharing

Verify whether thepresentation isshared from CiscoTelePresenceSystem IntegratorPackage C90 ,whilein a conference callwith CiscoTelePresence SX20Quick Set and CiscoTelePresence SX80Codec by usingCisco TelePresenceMCU 5310 allregistered in CiscoUnifiedCommunicationsManager

Presentationsharing fromIntegratorPackage C90 inadhocconference callusing MCU5310

UCJ11.1S.MCU.G.008



PassedSX20Quick Set ->Unified CM-> SX80Codec SX20Quick Set->Add-> UnifiedCM->MRGL->MCU 5310->EX90 -> Presentation Sharing

Verify whether thepresentation isshared from CiscoTelePresenceSystem EX90 ,whilein a conference callwith CiscoTelePresence SX20Quick Set and CiscoTelePresence SX80Codec by usingCisco TelePresenceMCU 5310 allregistered in CiscoUnifiedCommunicationsManager

Presentationsharing fromEX90 in adhocconference callusing MCU5310

UCJ11.1S.MCU.G.009

PassedSX20 Quick Set-> Unified CM-> SX80Codec SX20Quick Set->Add -> Unified CM->MRGL->MCU 5310->Integrator PackageC90->Hold/Resume

Verify whether thehold and resumefrom CiscoTelePresenceSystem IntegratorPackage C90 ,whilein a call with CiscoTelePresence SX20Quick Set and CiscoTelePresence SX80Codec by usingCisco TelePresenceMCU 5310 allregistered in CiscoUnifiedCommunicationsManager

Hold andresume theadhocconference callusing MCU5310 inIntegratorPackage C90

UCJ11.1S.MCU.G.010

Cisco TelePresence Management SuiteDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedNAVerify whether the NewEmail Template is noticedin booking confirmationemail after booking a newconference in CiscoTelePresenceManagementSuite

New EmailTemplate fornewly bookedconference

UCJ11.1S.TMS.G.001


Test Results SummaryCisco TelePresence Management Suite

PassedNAVerify whether the NewEmail Template is noticedin email after cancelling anew conference in CiscoTelePresenceManagementSuite

New EmailTemplate forcancelledconference

UCJ11.1S.TMS.G.002

PassedNAVerify whether MeetingDetails Page can be openedfrom Booking->ListConferences->Conferencedrop down menu and theinformation can be seen inCisco TelePresenceManagement Suite

Meeting DetailsPage under ListConferences inCisco TMS

UCJ11.1S.TMS.G.003

PassedNAVerify whether MeetingDetails Page can be openedfrom BookingConfirmationMail and theinformation of themeetingcan be seen in MeetingDetails of CiscoTelePresenceManagementSuite

Meeting DetailsPage fromBookingConfirmationMail in CiscoTMS

UCJ11.1S.TMS.G.004

PassedNAVerify whether locationfield has been added underBooking->NewConference in CiscoTelePresenceManagementSuite

Location field inCisco TMS

UCJ11.1S.TMS.G.005

PassedNAVerify whether a newlocation can be added inthe location field underBooking->NewConference in CiscoTelePresenceManagementSuite

Adding alocation inLocation field inCisco TMS

UCJ11.1S.TMS.G.006



PassedMX300-G2,MX200-G2->CiscoVCS->Conductor->CiscoTS on VM->CMR

Verify whether CMRConference details forCisco TelePresenceMX300-G2 and CiscoTelePresence MX200-G2registered in CiscoTelePresence VideoCommunication Server andcan be checked and viewedusing Active MeetingManager in CiscoTelePresenceManagementSuite ProvisioningExtension User Portal

CMRConferencedetails for CiscoVCS registeredendpoints inActive MeetingManager

UCJ11.1S.TMS.G.007

PassedMX300-G2,MX200-G2->CiscoVCS->Conductor->CiscoTS onVM->CMR->Mute allparticipants

Verify whether all theparticipants (CiscoTelePresence MX300-G2and Cisco TelePresenceMX200-G2) registered toCisco TelePresence VideoCommunication Server canbe muted using ActiveMeetingManager in CiscoTelePresenceManagementSuite ProvisioningExtension User Portal

Muting all CiscoVCS registeredparticipants inCMR usingActive MeetingManager

UCJ11.1S.TMS.G.008

PassedMX300-G2,MX200-G2->CiscoVCS->Conductor->CiscoTS onVM->CMR->Mute allparticipants->Unmute allparticipants

Verify whether all theparticipants (CiscoTelePresence MX300-G2and Cisco TelePresenceMX200-G2) registered toCisco TelePresence VideoCommunication Server canbe unmuted using ActiveMeetingManager in CiscoTelePresenceManagementSuite ProvisioningExtension User Portal

Unmuting allCisco VCSregisteredparticipants inCMR usingActive MeetingManager

UCJ11.1S.TMS.G.009



PassedMX300-G2,MX200-G2->CiscoVCS->Conductor->CiscoTS onVM->CMR->Disconnectall participants

Verify whether all theparticipants (CiscoTelePresence MX300-G2and Cisco TelePresenceMX200-G2) registered toCisco TelePresence VideoCommunication Server canbe disconnected usingActive Meeting Managerin Cisco TelePresenceManagement SuiteProvisioning ExtensionUser Portal

Disconnect allCisco VCSregisteredparticipants inCMR usingActive MeetingManager

UCJ11.1S.TMS.G.010

PassedNAVerify whether IP AudioCall-in can beenabled/disabled for SmartScheduler in CiscoTelePresenceManagementSuite ProvisioningExtension

Enable/DisableIP Video Call-infor SmartScheduler

UCJ11.1S.TMS.G.011

PassedNAVerify whether ISDNVideo Call-in can beenabled/disabled for SmartScheduler in CiscoTelePresenceManagementSuite ProvisioningExtension

Enable/DisableISDN VideoCall-in forSmart Scheduler

UCJ11.1S.TMS.G.012

PassedSIP Dial-inParticipant->CiscoVCS->Cisco MCU4510->Cisco TMS

Verify whether scheduledconference for a Dial-Inparticipant workssuccessfully in CiscoTelePresenceManagementSuite

Conference forDial-inparticipant inCisco TMS

UCJ11.1S.TMS.G.013

Cisco TelePresence ConductorDefectsStatusCall Component

FlowDescriptionTitleLogical ID


Test Results SummaryCisco TelePresence Conductor

PassedEX60 -> Cisco VCS-> Conductor ->Cisco TS 7010 ->CMR meetingconference EX90 ->Cisco VCS ->Conductor -> CiscoTS 7010 -> CMRmeeting conference

Verify whether user can ableto disconnect a participantfrom the conference havingendpoints registered withCisco TelePresence VideoCommunication Server inActive Meeting Managerusing Cisco TelePresenceManagement SuiteProvisioning Extensionintegrated with CiscoTelePresence Conductormanaged by CiscoTelePresence Server 7010

Disconnecting aparticipant in theconference fromActive MeetingManager usingTMSPE withConductormanaged byCisco TS 7010

UCJ11.1S.TC.G.001

PassedEX60 -> Cisco VCS-> Conductor ->TelePresence Serveron VM -> CMRmeeting conferenceEX90 -> Cisco VCS-> Conductor ->TelePresence Serveron VM -> CMRmeeting conference

Verify whether user can ableto disconnect all theparticipants from theconference having endpointsregistered with CiscoTelePresence VideoCommunication Server inActive Meeting Managerusing Cisco TelePresenceManagement SuiteProvisioning Extensionintegrated with CiscoTelePresence Conductormanaged by CiscoTelePresence Server on VM

Disconnectingall theparticipantsfrom theconference fromActive MeetingManager usingTMSPE withConductormanaged byTelePresenceServer on VM

UCJ11.1S.TC.G.002

PassedNAVerify whether the user is ableto select the conferenceplacement (either FavorScheduled or Favor CMR)under ConferenceConfiguration -> ConferencePlacement in CiscoTelePresence Conductor

Selection ofConferencePlacement underConferenceConfiguration inConductor

UCJ11.1S.TC.G.003

PassedNAVerify whether 1 week'sbridge utilization usage reportcan be downloaded in CiscoTelePresence Conductor

Usage ReportCollection for1week inConductor

UCJ11.1S.TC.G.004


Test Results SummaryCisco TelePresence Conductor

PassedSX80 Codec ->Unified CM ->Conductor -> CiscoTS 7010 -> MeetingConference

Verify whether CiscoTelePresence Conductor IPaddress is overridden byconfigured Sip domain whena Sip registered participantjoins the conference in CiscoTelePresence Conductormanaged by CiscoTelePresence Server 7010

Sip DomainOverrideSettings inConductor

UCJ11.1S.TC.G.005

PassedDX650 -> UnifiedCM ->Conductor ->MCU 5310 ->Meeting Conference

Verify whether Cisco DX650registered in Cisco UnifiedCommunicationsManager canjoin a Meeting conferencemanaged by CiscoTelePresence MCU 5310 inCisco TelePresenceConductor

Joining aMeetingconference fromDX650managed byCisco MCU5310

UCJ11.1S.TC.G.006

PassedDX650 ->UnifiedCM ->Conductor ->TelePresence Serveron VM-> Full HDMeeting Conference

Verify whether Cisco DX650registered in Cisco UnifiedCommunicationsManager canjoin a Full HD Meetingconference managed by CiscoTelePresence Server on VMin Cisco TelePresenceConductor

Joining a FullHD Meetingconference fromDX650managed byCiscoTelePresenceServer on VM

UCJ11.1S.TC.G.007

PassedDX650 -> UnifiedCM ->Conductor ->TelePresence Serveron VM -> HDMeeting Conference

Verify whether Cisco DX650registered in Cisco UnifiedCommunicationsManager canjoin a HDMeeting conferencemanaged by CiscoTelePresence Server on VMin Cisco TelePresenceConductor

Joining a HDMeetingconference fromDX650managed byCiscoTelePresenceServer on VM

UCJ11.1S.TC.G.008

Cisco TelePresence ServerDefectsStatusCall Component FlowDescriptionTitleLogical ID


Test Results SummaryCisco TelePresence Server

PassedMX200-G2(paired withAndroid phone ),SX10QuickSet & DX80 -> Unified CM->Cisco TS 7010 ->MeetingConference

Verify whether Meetme conference workssuccessfully amongCisco TelePresenceMX200-G2,CiscoTelePresence SX10Quick Set & CiscoDX80 which areregistered with CiscoUnifiedCommunicationsManager using CiscoTelePresence Server7010 and pairing theAndroid phone withCisco TelePresenceMX200-G2 via CiscoProximity

Meet meconferenceamongMX200-G2,SX10Quick Set &DX80which areregistered withUnified CMusing Cisco TS7010 andpairing theAndroid PhonewithMX200-G2via Proximity

UCJ11.1S.TS.G.001

PassedMX300-G2(paired withiPhone ),SX20 Quick Set &DX70 -> Unified CM ->Cisco TS 7010 -> MeetingConference

Verify whether Meetme conference workssuccessfully amongCisco TelePresenceMX300-G2,CiscoTelePresence SX20Quick Set & CiscoDX70 which areregistered with CiscoUnifiedCommunicationsManager using CiscoTelePresence Server7010 and pairing theiPhone with CiscoTelePresenceMX300-G2 via CiscoProximity

Meet meconferenceamongMX300-G2,SX20Quick Set &DX70which areregistered withUnified CMusing Cisco TS7010 andpairing theiPhone withMX300-G2 viaProximity

UCJ11.1S.TS.G.002



PassedMX200-G2(paired with iPad),SX10 Quick Set & DX80-> Unified CM -> Cisco TS7010 ->Meeting Conference

Verify whether Meetme conference workssuccessfully amongCisco TelePresenceMX200-G2,CiscoTelePresence SX10Quick Set & CiscoDX80 which areregistered with CiscoUnifiedCommunicationsManager using CiscoTelePresence Server7010 and pairing theiPad with CiscoTelePresenceMX200-G2 via CiscoProximity

Meet meconferenceamongMX200-G2,SX10Quick Set &DX80which areregistered withUnified CMusing Cisco TS7010 andpairing the iPadwithMX200-G2via Proximity

UCJ11.1S.TS.G.003

PassedMX200-G2(paired withAndroid ), IntegratorPackage C90 & DX80 ->Unified CM -> Cisco TS7010 ->Meeting Conference

Verify whether mutingthe call from AndroidPhone which is pairedwith CiscoTelePresenceMX200-G2 via CiscoProximity is workingsuccessfully during themeet me conferenceamong CiscoTelePresenceMX200-G2, CiscoTelePresence SystemIntegrator PackageC90 & Cisco DX80which are registeredwith Cisco UnifiedCommunicationsManager using CiscoTelePresence Server7010

Meet meconferenceamongMX200-G2,IntegratorPackage C90 &DX80which areregistered withUnified CMusing Cisco TS7010 and mutethe call fromAndroid Phonewhich is pairedwithMX200-G2via Proximity

UCJ11.1S.TS.G.004



PassedMX200-G2(paired withiPhone ),SX20 Quick Set &DX80 -> Unified CM ->Cisco TS 7010 -> MeetingConference

Verify whether mutingthe call from iPhonewhich is paired withCisco TelePresenceMX200-G2 via CiscoProximity is workingsuccessfully during themeet me conferenceamong CiscoTelePresenceMX200-G2,CiscoTelePresence SX20Quick Set & CiscoDX80 which areregistered with CiscoUnifiedCommunicationsManager using CiscoTelePresence Server7010

Meet meconferenceamongMX200-G2,SX20Quick Set &DX80which areregistered withUnified CMusing Cisco TS7010 and mutethe call fromiPhone which ispaired withMX200-G2 viaProximity

UCJ11.1S.TS.G.005

PassedMX200-G2(paired with iPad),SX10 Quick Set & DX80-> Unified CM -> Cisco TS7010 ->Meeting Conference

Verify whether mutingthe call from iPadwhich is paired withCisco TelePresenceMX200-G2 via CiscoProximity is workingsuccessfully during themeet me conferenceamong CiscoTelePresenceMX200-G2,CiscoTelePresence SX10Quick Set & CiscoDX80 which areregistered with CiscoUnifiedCommunicationsManager using CiscoTelePresence Server7010

Meet meconferenceamongMX200-G2,SX10Quick Set &DX80which areregistered withUnified CMusing Cisco TS7010 and mutethe call fromiPad which ispaired withMX200-G2 viaProximity

UCJ11.1S.TS.G.006



PassedMX200-G2(paired withiPhone ),DX70 & DX80 ->Unified CM -> Cisco TS7010 ->Meeting Conference

Verify whether Meetme conference workssuccessfully amongCisco TelePresenceMX200-G2,CiscoDX70 & Cisco DX80which are registeredwith Cisco UnifiedCommunicationsManager using CiscoTelePresence Server7010 and checking theinformation of devicesin Web UI ofMX200-G2

Meet meconferenceamongMX200-G2,DX70& DX80 whichare registeredwith UnifiedCM using CiscoTS 7010 andchecking theinformation ofdevices in WebUI ofMX200-G2

UCJ11.1S.TS.G.007

PassedMX200-G2(paired withAndroid ),EX90 & DX80 ->Unified CM -> Cisco TS7010 ->Meeting Conference

Verify whether endingthe call from AndroidPhone which is pairedwith CiscoTelePresenceMX200-G2 via CiscoProximity is workingsuccessfully during themeet me conferenceamong CiscoTelePresenceMX200-G2, CiscoTelePresence SystemEX90 & Cisco DX80which are registeredwith Cisco UnifiedCommunicationsManager using CiscoTelePresence Server7010

Meet meconferenceamongMX200-G2,EX90& DX80 whichare registeredwith UnifiedCM using CiscoTS 7010 andend the callfrom AndroidPhone which ispaired withMX200-G2 viaProximity

UCJ11.1S.TS.G.008



PassedMX200-G2(paired withiPhone ),EX60 & DX80 ->Unified CM -> Cisco TS7010 ->Meeting Conference

Verify whether endingthe call from iPhonewhich is paired withCisco TelePresenceMX200-G2 via CiscoProximity is workingsuccessfully during themeet me conferenceamong CiscoTelePresenceMX200-G2,CiscoTelePresence SystemEX60 & Cisco DX80which are registeredwith Cisco UnifiedCommunicationsManager using CiscoTelePresence Server7010

Meet meconferenceamongMX200-G2,EX60& DX80 whichare registeredwith UnifiedCM using CiscoTS 7010 andend the callfrom iPhonewhich is pairedwithMX200-G2via Proximity

UCJ11.1S.TS.G.009

PassedSX20 Quick Set(paired withPC client),SX10 Quick Set& MX200-G2->CiscoVCS->Cisco TS7010->MeetingConference-> Screen Sharing

Verify whether Screensharing from PCClient to CiscoTelePresence SX20Quick Set via CiscoProximity workssuccessfully duringMeet me conferenceamong CiscoTelePresence SX20Quick Set ,CiscoTelePresence SX10Quick Set & CiscoTelePresenceMX200-G2 which areregistered with CiscoTelePresence VideoCommunicationServer using CiscoTelePresence Server7010

Screen sharingfrom PC Clientto SX20 QuickSet viaProximityduring Meet meconferenceamong SX20Quick Set,SX10 QuickSet &MX200-G2which areregistered withCisco VCSusing Cisco TS7010

UCJ11.1S.TS.G.010



PassedSX10 Quick Set(paired withAndroid phone),MX200-G2& SX20 Quick Set->CiscoVCS->Cisco TS7010->Meeting Conference

Verify whether Meetme conference workssuccessfully amongCisco TelePresenceSX10Quick Set,CiscoTelePresenceMX200-G2 & SX20Quick Set which areregistered with CiscoTelePresence VideoCommunicationServer using CiscoTelePresence Server7010 and pairing theAndroid Phone withCisco TelePresenceSX10 Quick Set viaCisco Proximity

Meet meconferenceamong SX10Quick Set,MX200-G2 &SX20 Quick Setwhich areregistered withCisco VCSusing Cisco TS7010 andpairing theAndroid Phonewith SX10Quick Set viaProximity

UCJ11.1S.TS.G.011

PassedMX300-G2(paired with PCclient),SX10 Quick Set &SX20 Quick Set->CiscoVCS->Cisco TS7010->MeetingConference->Sharing Screen

Verify whether Screensharing from PCClient to CiscoTelePresenceMX300-G2 via CiscoProximity workssuccessfully duringMeet me conferenceamong CiscoTelePresenceMX300-G2,CiscoTelePresence SX10Quick Set & SX20Quick Set which areregistered with CiscoTelePresence VideoCommunicationServer using CiscoTelePresence Server7010

Screen sharingfrom PC Clientto MX300-G2via Proximityduring Meet meconferenceamongMX300-G2,SX10Quick Set &SX20 Quick Setwhich areregistered withCisco VCSusing Cisco TS7010

UCJ11.1S.TS.G.012



PassedMX200-G2(paired withiPhone),SX10 Quick Set &SX20 Quick Set->CiscoVCS->Cisco TS7010->Meeting Conference

Verify whether Meetme conference workssuccessfully amongCisco TelePresenceMX200-G2,CiscoTelePresence SX10Quick Set & SX20Quick Set which areregistered with CiscoTelePresence VideoCommunicationServer using CiscoTelePresence Server7010 and pairing theiPhone with CiscoTelePresenceMX200-G2 via CiscoProximity

Meet meconferenceamongMX200-G2,SX10Quick Set &SX20 Quick Setwhich areregistered withCisco VCSusing Cisco TS7010 andpairing theiPhone withMX200-G2 viaProximity

UCJ11.1S.TS.G.013

PassedMX200-G2(paired withiPad),SX10 Quick Set &SX20 Quick Set->CiscoVCS->Cisco TS7010->Meeting Conference

Verify whether Meetme conference worksamong CiscoTelePresenceMX200-G2,CiscoTelePresence SX10Quick Set & SX20Quick Set which areregistered with CiscoTelePresence VideoCommunicationServer using CiscoTelePresence Server7010 and pairing theiPad with CiscoTelePresenceMX200-G2 via CiscoProximity

Meet meconferenceamongMX200-G2,SX10Quick Set &SX20 Quick Setwhich areregistered withCisco VCSusing Cisco TS7010 andpairing the iPadwithMX200-G2via Proximity

UCJ11.1S.TS.G.014



PassedMX200-G2(paired with PCclient),SX10 Quick Set &DX80->Unified CM->CiscoTS 7010->MeetingConference->Screen Sharing

Verify whether Screensharing from PCClient to CiscoTelePresenceMX200-G2 via CiscoProximity workssuccessfully duringMeet me conferenceamong CiscoTelePresenceMX200-G2,CiscoTelePresence SX10Quick Set & CiscoDX80 which areregistered with CiscoUnifiedCommunicationsManager using CiscoTelePresence Server7010

Screen sharingfrom PC Clientto MX200-G2via Proximityduring Meet meconferenceamongMX200-G2,SX10Quick Set &DX80which areregistered withUnified CMusing Cisco TS7010

UCJ11.1S.TS.G.015

Cisco Jabber GuestDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedNATo Verifywhether theuser is able toinstall CiscoJabber Guestserver 10.6.10in ESXi 6.0hypervisor withB-Series Server

Install CiscoJabber GuestServer 10.6.10in ESXi 6.0Hypervisor withB-Series Server

UCJ11.1S.JG.G.001

PassedNATo Verifywhether theuser is able toinstall CiscoJabber Guestserver 10.6.10in ESXi 6.0hypervisor withC-Series Server

Install CiscoJabber GuestServer 10.6.10in ESXi 6.0Hypervisor withC-Series Server

UCJ11.1S.JG.G.002


Test Results SummaryCisco Jabber Guest

PassedJabber GuestClient(Android)->JabberGuest->Expressway-E->Expressway-C->UnifiedCM->SX10 Quick Set

Verify whethercross launchparametersimprovementreflect in CiscoJabber Guest onAndroidsuccessfully

Cross LaunchParametersimprovement inJabber Guest onAndroid

UCJ11.1S.JG.G.003

PassedJabber GuestClient(Android)->Jabber Guest->Expressway-E->Expressway-C->UnifiedCM->MX200-G2

Verify whetherMobile UIAlignmentproperlyreflected inCisco JabberGuest onAndroidsuccessfully

Check MobileUI Alignment inJabber Guest onAndroid

UCJ11.1S.JG.G.004

PassedJabber Guest Client(IOS)->JabberGuest->Expressway-E->Expressway-C->UnifiedCM->MX300-G2

Verify whetherMobile UIAlignmentproperlyreflected inCisco JabberGuest on IOSsuccessfully

Check MobileUI Alignment inJabber Guest onIOS

UCJ11.1S.JG.G.005

PassedJabber GuestClient(Windows)->Jabber Guest->Expressway-E->Expressway-C->UnifiedCM->SX10 Quick Set

To verifywhether theuser is able tomake longduration videocall betweenCisco JabberGuest onWindows andCiscoTelePresenceSX10Quick Setvia CiscoExpressway-E

Long Durationvideo callbetween JabberGuest onWindows andSX10 Quick Setvia Expressway-E

UCJ11.1S.JG.G.006



PassedJabberGuest Client(Mac)->JabberGuest->Expressway-E->Expressway-C->UnifiedCM->SX20 Quick Set

To verifywhether theuser is able tomake longduration videocall betweenCisco JabberGuest on Macand CiscoTelePresenceSX20Quick Setvia CiscoExpressway-E

Long Durationvideo callbetween JabberGuest on Macand SX20QuickSet viaExpressway -E

UCJ11.1S.JG.G.007


To verifywhether theuser is able tomake longduration videocall betweenCisco JabberGuest onAndroid andCiscoTelePresenceMX200-G2 viaCiscoExpressway-E

Long Durationvideo callbetween JabberGuest onAndroid andMX200-G2 viaExpressway -E

UCJ11.1S.JG.G.008

PassedJabber Guest Client(IOS)->JabberGuest->Expressway-E->Expressway-C->UnifiedCM->MX300-G2

To verifywhether theuser is able tomake longduration videocall betweenCisco JabberGuest on IOSand CiscoTelePresenceMX300-G2 viaCiscoExpressway-E

Long Durationvideo callbetween JabberGuest on IOSand MX300-G2via Expressway-E

UCJ11.1S.JG.G.009



PassedJabber GuestClient(Windows)->Jabber Guest->Expressway-E->Expressway-C->UnifiedCM->MX300-G2

To verifywhether theuser is able tomake an adhoccall with Guestvideo policy assend andreceive canstart/stopsending duringcall (default)from CiscoJabber GuestClient onWindows toCiscoTelePresenceMX300-G2

Adhoc call withGuest videopolicy as sendand receive canstart/stopsending duringcall (default)from JabberGuest Client onWindows toMX300-G2

UCJ11.1S.JG.G.010


To verifywhether theuser is able tomake an adhoccall with Guestvideo policy ascannot send orreceivethroughout callfrom CiscoJabber GuestClient onWindows toCiscoTelePresenceMX300-G2

Adhoc call withGuest videopolicy as cannotsend or receivethroughout callfrom JabberGuest Client onWindows toMX300-G2

UCJ11.1S.JG.G.011




To verifywhether theuser is able tomake an adhoccall with Guestvideo policy asreceive only ,cannot startsending duringcall from CiscoJabber GuestClient onWindows toCiscoTelePresenceMX300-G2

Adhoc call withGuest videopolicy as receiveonly , cannotstart sendingduring call fromJabber GuestClient onWindows toMX300-G2

UCJ11.1S.JG.G.012


To verifywhether theuser is able tomake an adhoccall with Guestvideo policyreceive onlyinitially, canstart/stopsending duringcall from CiscoJabber GuestClient onWindows toCiscoTelePresenceMX300-G2

Adhoc call withGuest videopolicy as receiveonly initially,can start/stopsending duringcall from JabberGuest Client onWindows toMX300-G2

UCJ11.1S.JG.G.013



PassedJabberGuest Client(Mac)->JabberGuest->Expressway-E->Expressway-C->UnifiedCM->MX200-G2

To verifywhether theuser is able tomake an adhoccall with Guestvideo policy assend andreceive canstart/stopsending duringcall (default)from CiscoJabber GuestClient on Macto CiscoTelePresenceMX200-G2

Adhoc call withGuest videopolicy as sendand receive canstart/stopsending duringcall (default)from JabberGuest Client onMac toMX200-G2

UCJ11.1S.JG.G.014

PassedJabberGuest Client(Mac)->JabberGuest->Expressway-E->Expressway-C->UnifiedCM->MX200-G2

To verifywhether theuser is able tomake an adhoccall with Guestvideo policy ascannot send orreceivethroughout callfrom CiscoJabber GuestClient on Macto CiscoTelePresenceMX200-G2

Adhoc call withGuest videopolicy as cannotsend or receivethroughout callfrom JabberGuest Client onMac toMX200-G2

UCJ11.1S.JG.G.015

PassedJabberGuest Client(Mac)->JabberGuest->Expressway-E->Expressway-C->UnifiedCM->SX10 Quick Set

To verifywhether theuser is able tomake an adhoccall with Guestvideo policy asreceive only,cannot startsending duringcall from CiscoJabber GuestClient on Macto CiscoTelePresenceSX10Quick Set

Adhoc call withGuest videopolicy as receiveonly , cannotstart sendingduring call fromJabber GuestClient on Macto SX10 QuickSet

UCJ11.1S.JG.G.016



PassedJabberGuest Client(Mac)->JabberGuest->Expressway-E->Expressway-C->UnifiedCM->SX80 Codec

To verifywhether theuser is able tomake an adhoccall with Guestvideo policyreceive onlyinitially, canstart/stopsending duringcall from CiscoJabber GuestClient on Macto CiscoTelePresenceSX80 Codec

Adhoc call withGuest videopolicy as receiveonly initially,can start/stopsending duringcall from JabberGuest Client onMac to SX80Codec

UCJ11.1S.JG.G.017

PassedJabber Guest Client(IOS)->JabberGuest->Expressway-E->Expressway-C->UnifiedCM->DX80

To verifywhether theuser is able tomake an adhoccall with Guestvideo policy assend andreceive canstart/stopsending duringcall (default)from CiscoJabber GuestClient on IOS(iPhone/iPad) toCisco DX80

Adhoc call withGuest videopolicy as sendand receive canstart/stopsending duringcall (default)from JabberGuest Client onIOS(iPhone/iPad)to DX80

UCJ11.1S.JG.G.018

PassedJabber Guest Client(IOS)->JabberGuest->Expressway-E->Expressway-C->UnifiedCM->DX70

To verifywhether theuser is able tomake an adhoccall with Guestvideo policy ascannot send orreceivethroughout callfrom CiscoJabber GuestClient on IOS(iPhone/iPad) toCisco DX70

Adhoc call withGuest videopolicy as cannotsend or receivethroughout callfrom JabberGuest Client onIOS(iPad/iPhone) toDX70

UCJ11.1S.JG.G.019



PassedJabber Guest Client(IOS)->JabberGuest->Expressway-E->Expressway-C->UnifiedCM->SX10 Quick Set

To verifywhether theuser is able tomake an adhoccall with Guestvideo policy asreceive only ,cannot startsending duringcall from CiscoJabber GuestClient on IOS(iPhone/iPad) toCiscoTelePresenceSX10Quick Set

Adhoc call withGuest videopolicy as receiveonly , cannotstart sendingduring call fromJabber GuestClient on IOS(iPhone/iPad) toSX10 Quick Set

UCJ11.1S.JG.G.020

PassedJabber Guest Client(IOS)->JabberGuest->Expressway-E->Expressway-C->UnifiedCM->SX20 Quick Set

To verifywhether theuser is able tomake an adhoccall with Guestvideo policyreceive onlyinitially, canstart/stopsending duringcall from CiscoJabber GuestClient on IOS(iPhone/iPad) toCiscoTelePresenceSX20Quick Set

Adhoc call withGuest videopolicy as receiveonly initially,can start/stopsending duringcall from JabberGuest Client onIOS(iPhone/iPadto SX20 QuickSet

UCJ11.1S.JG.G.021




To verifywhether theuser is able tomake an adhoccall with Guestvideo policy assend andreceive canstart/stopsending duringcall (default)from CiscoJabber GuestClient onAndroid(Samsung/Sony)to CiscoTelePresenceMX300-G2

Adhoc call withGuest videopolicy as sendand receive canstart/stopsending duringcall (default)from JabberGuest Client onAndroid(Samsung/Sony)to MX300-G2

UCJ11.1S.JG.G.022


To verifywhether theuser is able tomake an adhoccall with Guestvideo policy ascannot send orreceivethroughout callfrom CiscoJabber GuestClient onAndroid(Samsung/Sony)to CiscoTelePresenceMX300-G2

Adhoc call withGuest videopolicy as cannotsend or receivethroughout callfrom JabberGuest Client onAndroid(Samsung/Sony)to MX300-G2

UCJ11.1S.JG.G.023



PassedJabber GuestClient(Android)->Jabber Guest->Expressway-E->Expressway-C->UnifiedCM->SX10 Quick Set

To verifywhether theuser is able tomake an adhoccall with Guestvideo policy asreceive only ,cannot startsending duringcall from CiscoJabber GuestClient onAndroid(Samsung/Sony)to CiscoTelePresenceSX10Quick Set

Adhoc call withGuest videopolicy as receiveonly , cannotstart sendingduring call fromJabber GuestClient onAndroid(Samsung/Sony)to SX10 QuickSet

UCJ11.1S.JG.G.024

PassedJabber GuestClient(Android)->Jabber Guest->Expressway-E->Expressway-C->UnifiedCM->SX20 Quick Set

To verifywhether theuser is able tomake an adhoccall with Guestvideo policyreceive onlyinitially, canstart/stopsending duringcall from CiscoJabber GuestClient onAndroid(Samsung/Sony)to CiscoTelePresenceSX20Quick Set

Adhoc call withGuest videopolicy as receiveonly initially,can start/stopsending duringcall from JabberGuest Client onAndroid(Samsung/Sony)to SX20 QuickSet

UCJ11.1S.JG.G.025

Cisco Prime Collaboration

Cisco Prime Collaboration AnalyticsDefectsStatusDescriptionTitleLogical ID


Test Results SummaryCisco Prime Collaboration

PassedGo to Analytics -> TechnologyAdoption and verify whether theuser is able to check for PreviousPage link in DeploymentDistribution By Endpoint Modeldashlet in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for Previous Pagelink (Navigation) inDeployment DistributionBy Endpoint Modeldashlet

UCJ11.1S.CPC-AN.G.001

PassedGo to Analytics -> TechnologyAdoption and verify whether theuser is able to check for PreviousPage link in Call Distribution ByEndpoint Model dashlet in CiscoPrime Collaboration AssuranceEnterprise mode

Check for Previous Pagelink (Navigation) in CallDistribution By EndpointModel dashlet


PassedGo to Analytics -> Asset Usageand verify whether the user is ableto check for Previous Page link inLeast Used Endpoint Typesdashlet in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for Previous Pagelink (Navigation) in LeastUsed Endpoint Typesdashlet


PassedGo to Analytics -> Asset Usageand verify whether the user is ableto check for Previous Page link inNo Show Video TelepresenceEndpoint dashlet in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for Previous Pagelink (Navigation) in NoShowVideo TelepresenceEndpoint dashlet


PassedGo to Analytics -> TrafficAnalysis and verify whether theuser is able to check for PreviousPage link in Top N Call TrafficLocations dashlet in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for Previous Pagelink (Navigation) in TopN Call Traffic Locationsdashlet


PassedGo to Analytics -> CapacityAnalysis and verify whether theuser is able to check for PreviousPage link in Busy-Hour TrunkCapacity dashlet in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for Previous Pagelink (Navigation) inBusy-Hour TrunkCapacity dashlet



Test Results SummaryCisco Prime Collaboration Analytics

PassedGo to Analytics -> CapacityAnalysis and verify whether theuser is able to check for PreviousPage link in Busy Hour RouteGroup Capacity dashlet in CiscoPrime Collaboration AssuranceEnterprise mode

Check for Previous Pagelink (Navigation) inBusy-Hour Route GroupCapacity dashlet.


PassedGo to Analytics -> ServiceExperience and verify whether theuser is able to check for PreviousPage link in Service ExperienceDistribution dashlet in CiscoPrime Collaboration AssuranceEnterprise mode

Check for Previous Pagelink (Navigation) inService ExperienceDistribution dashlet


PassedGo to Analytics -> UC SystemPerformance and verify whetherthe user is able to check forPrevious Page link in CPUUtilization dashlet in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for Previous Pagelink (Navigation) in CPUUtilization dashlet


PassedGo to Analytics -> UC SystemPerformance and verify whetherthe user is able to check forPrevious Page link in MemoryUtilization dashlet in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for Previous Pagelink (Navigation) inMemory Utilizationdashlet


PassedGo to Analytics -> VideoConferences and verify whetherthe user is able to check forPrevious Page link inConferencing Devices VideoUtilization dashlet in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for Previous Pagelink (Navigation) inConferencing DevicesVideo Utilization dashlet


PassedGo to Analytics -> License Usageand verify whether the user is ableto check for Previous Page link inContact Centre Enterprise dashletin Cisco Prime CollaborationAssurance Enterprise mode

Check for Previous Pagelink (Navigation) inContact Centre Enterprisedashlet




PassedGo to Analytics -> TechnologyAdoption and verify whether theuser is able to check forDetachable option to view theDeployment Distribution ByEndpoint Model dashlet in newtab in Cisco Prime CollaborationAssurance Enterprise mode

Check for Detachableoption to view theDeployment DistributionBy Endpoint Modeldashlet in new tab


PassedGo to Analytics -> TechnologyAdoption and verify whether theuser is able to check forDetachable option and view theCall Distribution By EndpointModel dashlet in new tab in CiscoPrime Collaboration AssuranceEnterprise mode

Check for Detachableoption to view the CallDistribution By EndpointModel dashlet in new tab


PassedGo to Analytics -> Asset Usageand verify whether the user is ableto check for Detachable option toview the Least Used EndpointTypes dashlet in new tab in CiscoPrime Collaboration AssuranceEnterprise mode

Check for Detachableoption to view the LeastUsed Endpoint Typesdashlet in new tab


PassedGo to Analytics -> Asset Usageand verify whether the user is ableto check for Detachable option toview the No Show VideoTelepresence Endpoint dashlet innew tab in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for Detachableoption to view the and NoShowVideo TelepresenceEndpoint dashlet in newtab


PassedGo to Analytics -> TrafficAnalysis and verify whether theuser is able to check forDetachable option to view theTop N Call Traffic Locationsdashlet in new tab in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for Detachableoption to view the Top NCall Traffic Locationsdashlet in new tab


PassedGo to Analytics -> CapacityAnalysis and verify whether theuser is able to check forDetachable option to view theBusy-Hour Trunk Capacitydashlet in new tab in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for Detachableoption to view theBusy-Hour TrunkCapacity dashlet in newtab




PassedGo to Analytics -> CapacityAnalysis and verify whether theuser is able to check forDetachable option to view theBusy-Hour RouteGroupCapacitydashlet in new tab in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for Detachableoption to view theBusy-Hour Route GroupCapacity dashlet in newtab


PassedGo to Analytics -> ServiceExperience and verify whether theuser is able to check forDetachable option to view theService Experience Distributiondashlet in new tab in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for Detachableoption to view the ServiceExperience Distributiondashlet in new tab


PassedGo to Analytics -> UC SystemPerformance and verify whetherthe user is able to check forDetachable option to view theCPU Utilization dashlet in newtab in Cisco Prime CollaborationAssurance Enterprise mode

Check for Detachableoption to view the CPUUtilization dashlet in newtab


PassedGo to Analytics -> UC SystemPerformance and verify whetherthe user is able to check forDetachable option to view theMemory Utilization dashlet innew tab in Cisco PrimeCollaboration AssuranceEnterprise mode

Check for Detachableoption to view theMemory Utilizationdashlet in new tab


PassedGo to Analytics -> VideoConferences and verify whetherthe user is able to check forDetachable option to view theConferencing Devices VideoUtilization dashlet in new tab inCisco Prime CollaborationAssurance Enterprise mode

Check for Detachableoption to view theConferencing DevicesVideo Utilization dashletin new tab


PassedGo to Analytics -> License Usageand verify whether the user is ableto check for Detachable option toview the Contact CentreEnterprise dashlet in new tab inCisco Prime CollaborationAssurance Enterprise mode

Check for Detachableoption to view the ContactCentre Enterprise dashletin new tab




PassedLogin to Cisco PrimeCollaboration Assurance Serveras Admin through vSphere clientand verify that user is able toupgrade from 11.0 to 11.1successfully

Upgrade Cisco PrimeCollaboration Assurancefrom 11.0 to 11.1


PassedGo to Analytics -> TrafficAnalysis and verify whether useris able to check the Call Statisticsfor selected Endpoint in Top NCallers dashlet in Cisco PrimeCollaboration AssuranceEnterprise mode

Check whether CallStatistics are displayed forselected Endpoint in TopN Callers dashlet


PassedGo to Analytics -> TrafficAnalysis and verify whether useris able to check the Call Durationfor selected Endpoint in Top NDialed Numbers dashlet in CiscoPrime Collaboration AssuranceEnterprise mode

Check whether CallDuration are displayed forselected Endpoint in TopN Dialed Numbersdashlet


PassedGo to Analytics -> TrafficAnalysis and verify whether useris able to check the Call Count forselected Endpoint in Top NDialed Numbers dashlet in CiscoPrime Collaboration AssuranceEnterprise mode

Check whether CallCount are displayed forselected Endpoint in TopN Dialed Numbersdashlet


PassedGo to Analytics -> TrafficAnalysis and verify whether useris able to check the Call Durationfor selected Endpoint in Top NCallers dashlet in Cisco PrimeCollaboration AssuranceEnterprise mode

Check whether CallDuration are displayed forselected Endpoint in TopN Callers dashlet


PassedGo to Analytics -> TrafficAnalysis and verify whether useris able to check the Call Count forselected Endpoint inTop NCallers dashlet in Cisco PrimeCollaboration AssuranceEnterprise mode

Check whether CallCount are displayed forselected Endpoint in TopN Callers dashlet


Cisco Prime Collaboration AssuranceDefectsStatusDescriptionTitleLogical ID


Test Results SummaryCisco Prime Collaboration Assurance

PassedGo to Device Inventory -> InventoryManagement Dashboard and verifywhether the user is able to cross launchthe 360° view for Device in Cisco PrimeCollaboration Assurance EnterpriseMode

Check for 360° view tocross launch Device inEnterprise Mode

UCJ11.1S.CPC-AS.G.001

PassedGo to Device Inventory -> InventoryManagement Dashboard and verifywhether the user is able to cross launchthe 360° view for Endpoints in CiscoPrime Collaboration AssuranceEnterprise Mode

Check for 360° view tocross launch Endpoints inEnterprise Mode


PassedGo to Device Inventory -> InventoryManagement Dashboard and verifywhether the user is able to check thestatus for vCenter through 360° view inCisco Prime Collaboration AssuranceEnterprise Mode

Check the status forvCenter through 360°view in Enterprise Mode


PassedGo to Diagnose -> Endpoint DiagnosticsDashboard and verify whether the useris able to check the Connectivity Detailsin 360° view for Jabber Desktop in CiscoPrime Collaboration AssuranceEnterprise Mode

Check the ConnectivityDetails in 360° view forJabber Desktop inEnterprise Mode


PassedGo to Diagnose -> Endpoint DiagnosticsDashboard and verify whether the useris able to check the Endpoint Details in360° view for DX70 in Cisco PrimeCollaboration Assurance EnterpriseMode

Check the EndpointDetails in 360° view forDX70 in EnterpriseMode


PassedGo to Diagnose -> Endpoint DiagnosticsDashboard and verify whether the useris able to check the System Details in360° view for Jabber Desktop in CiscoPrime Collaboration AssuranceEnterprise Mode

Check the SystemDetailsin 360° view for JabberDesktop in EnterpriseMode


PassedGo to Device Inventory -> InventoryManagement Dashboard and verifywhether the user is able to view theMaximized device 360° view for CiscoUnity Connection in Cisco PrimeCollaboration Assurance EnterpriseMode

View the Maximizeddevice 360° view forCisco Unity Connectionin Enterprise Mode




PassedGo to Device Inventory -> InventoryManagement Dashboard and verifywhether the user is able to view the CPUUtilization in Maximized device 360°view for Cisco Unified CommunicationsManager in Cisco Prime CollaborationAssurance Enterprise Mode

View the CPUUtilizationin Maximized device360° view for CiscoUnified CommunicationsManager in EnterpriseMode


PassedGo to Device Inventory -> InventoryManagement Dashboard and verifywhether the user is able to view the TraceRoute in Maximized device 360° viewfor Cisco Telepresence Server in CiscoPrime Collaboration AssuranceEnterprise Mode

View the Trace Route inMaximized device 360°view for CiscoTelepresence Server inEnterprise Mode


PassedGo to Device Inventory -> InventoryManagement Dashboard and verifywhether the user is able to view thePooling Parameters in Device 360° viewfor Cisco Telepresence Server in CiscoPrime Collaboration AssuranceEnterprise Mode

View the PoolingParameters in Device360° view for CiscoTelepresence Server inEnterprise Mode


PassedGo to Device Inventory -> InventoryManagement Dashboard and verifywhether the user is able to view the CiscoTelepresence Conductor IP Address linkon the same page in Cisco PrimeCollaboration Assurance EnterpriseMode

View the CiscoTelepresence ConductorIP Address link underInverntory Managementin Enterprise Mode


PassedGo to Diagnose -> Endpoint DiagnosticsDashboard and verify whether the useris able to view the Endpoints IP Addresslink on the same page in Cisco PrimeCollaboration Assurance EnterpriseMode

View the Endpoints IPAddress link underEndpoint Diagnostics inEnterprise Mode


PassedGo to Device Inventory -> UC DeviceSearch Dashboard and verify whetherUCCluster status renamed as UCDeviceSearch when upgraded fromCisco PrimeCollaboration Assurance 11.0 to 11.1 inEnterprise Mode

Check whether UCCluster status renamed asUC Device Search inEnterprise Mode


PassedGo toAssuranceAdministration -> EventCustomization Dashboard and verifywhether the user is able to check theSearch option functionality in CiscoPrime Collaboration AssuranceEnterprise Mode

Check Search optionfunctionality under EventCustomization inEnterprise Mode




PassedGo to Monitor -> System ViewDashboard and verify whether the useris able to view the Virtual MemoryUsage of Cisco Unity Connection underPerformance tab in Cisco PrimeCollaboration Assurance EnterpriseMode

View the VirtualMemoryUsage of Cisco UnityConnection underPerformance tab inEnterprise Mode


PassedGo to Device Inventory -> UC DeviceSearch Dashboard and verify whetherthe user is able to search Devices inCisco Prime Collaboration AssuranceEnterprise Mode

SearchDevices under UCDevice Search inEnterprise Mode


PassedGo toAssuranceAdministration -> EventCustomization Dashboard and verifywhether the user is able to view the Notesfor Email column under CorrelationRules tab in Cisco Prime CollaborationAssurance Enterprise Mode

View the Notes for Emailcolumn under CorrelationRules tab in EnterpriseMode


PassedGo toAssuranceAdministration -> EventCustomization Dashboard and verifywhether the user is able to add notessuccessfully in Notes for Email columnunder Syslog Rules tab in Cisco PrimeCollaboration Assurance MSP Mode

Adding Notessuccessfully in Notes forEmail column underSyslog Rules tab in MSPMode


PassedGo toAssuranceAdministration -> EventCustomization Dashboard and verifywhether the user is able to add notessuccessfully in Notes for Email columnunder Threshold Rules tab in CiscoPrime Collaboration Assurance MSPMode

Adding Notessuccessfully in Notes forEmail column underThreshold Rules tab inMSP Mode


PassedGo toAssuranceAdministration -> EventCustomization Dashboard and verifywhether the user is able to Add Eventunder Threshold Rules Advanced tab inCisco Prime Collaboration AssuranceEnterprise Mode

Add Event underThreshold Rules tab inEnterprise Mode


PassedGo toAssuranceAdministration -> EventCustomization Dashboard and verifywhether the user is able to Delete SyslogEvent under Syslog Rules tab in CiscoPrime Collaboration Assurance MSPMode

Delete Syslog Eventunder Syslog Rules tab inMSP Mode




PassedGo toAssuranceAdministration -> EventCustomization Dashboard and verifywhether the user is able to Edit SyslogEvent under Syslog Rules tab in CiscoPrime Collaboration Assurance MSPMode

Edit Syslog Event underSyslog Rules tab in MSPMode


PassedGo toAssuranceAdministration -> EventCustomization Dashboard and verifywhether the user is able to EditCorrelation Rule under Correlation Rulestab in Cisco Prime CollaborationAssurance MSP Mode

Edit Correlation Ruleunder Correlation Rulestab in MSP Mode


PassedGo toAssuranceAdministration -> EventCustomization Dashboard and verifywhether the user is able to disable AlarmSuppression under Correlation Rules tabin Cisco Prime Collaboration AssuranceEnterprise Mode

Disable AlarmSuppression underCorrelation Rules tab inEnterprise Mode


PassedGo toAssuranceAdministration -> EventCustomization Dashboard and verifywhether the user is able to Clone aCorrelation Rule under Correlation Rulestab in Cisco Prime CollaborationAssurance Enterprise Mode

Clone a Correlation Ruleunder Correlation Rulestab in Enterprise Mode


PassedGo toAssuranceAdministration -> EventCustomization Dashboard and verifywhether the user is able to use the Raiseoption for a Syslog Event under SyslogRules tab in Cisco Prime CollaborationAssurance MSP Mode

Check for Raise optionunder Syslog Rules tab inMSP Mode


PassedGo to Device Inventory -> InventoryManagement Dashboard and verifywhether the user is able to discover CiscoUnified Communications Manager inCisco Prime Collaboration AssuranceEnterprise Mode

Discover Cisco UnifiedCommunicationsManager under InventoryManagement Dashboardin Enterprise Mode


PassedGo to Device Inventory -> InventoryManagement Dashboard and verifywhether the user is able to discovervCenter in Cisco Prime CollaborationAssurance Enterprise Mode

Discover vCenter underInventory ManagementDashboard in EnterpriseMode




PassedGo to Device Inventory -> InventoryManagement Dashboard and verifywhether the user is able to discover CiscoTelepresence Server in Cisco PrimeCollaboration Assurance EnterpriseMode

Discover CiscoTelepresence Serverunder InventoryManagement Dashboardin Enterprise Mode


PassedGo to Device Inventory -> InventoryManagement Dashboard and verifywhether the user is able to discover CiscoTelepresence Conductor in Cisco PrimeCollaboration Assurance EnterpriseMode

Discover CiscoTelepresence Conductorunder InventoryManagement Dashboardin Enterprise Mode


Cisco Prime Collaboration ProvisioningDefectsStatusDescriptionTitleLogical ID

PassedGo to Infrastructure Setup ->Configuration Template and verifythat user is able to create a newconfiguration template for theProcessor type Unified CM andItem type Deployment service inCisco Prime CollaborationProvisioning successfully

Create a newConfiguration Templatefor the Processor typeUnified CM and Itemtype Deployment serviceunder InfrastructureSetup

UCJ11.1S.CPC-PR.G.001

PassedGo to Infrastructure Setup ->Configuration Template and verifythat user is able to create a newconfiguration template for theProcessor type Unified CM andItem type Device Mobility inCisco Prime CollaborationProvisioning successfully

Create a newConfiguration Templatefor the Processor typeUnified CM and Itemtype Device Mobilityunder InfrastructureSetup


PassedGo to Infrastructure Setup ->Configuration Template and verifythat user is able to create a newconfiguration template for theProcessor type Unified CM andItem type Media Resource Groupin Cisco Prime CollaborationProvisioning successfully

Create a newConfiguration Templatefor the Processor typeUnified CM and Itemtype Media ResourceGroup underInfrastructure Setup



Test Results SummaryCisco Prime Collaboration Provisioning

PassedGo to Infrastructure Setup ->Configuration Template and verifythat user is able to create a newconfiguration template for theProcessor type Unified CM andItem type Media Resource GroupList in Cisco Prime CollaborationProvisioning successfully

Create a newConfiguration Templatefor the Processor typeUnified CM and Itemtype Media ResourceGroup List underInfrastructure Setup


PassedGo to Infrastructure Setup ->Configuration Template and verifythat user is able to create a newconfiguration template for theProcessor type Unified CM andItem type Message waiting inCisco Prime CollaborationProvisioning successfully

Create a newConfiguration Templatefor the Processor typeUnified CM and Itemtype Message waitingunder InfrastructureSetup


PassedGo to Infrastructure Setup ->Configuration Template and verifythat user is able to create a newconfiguration template for theProcessor type Unified CM andItem type IP phone services inCisco Prime CollaborationProvisioning successfully

Create a newConfiguration Templatefor the Processor typeUnified CM and Itemtype IP phone servicesunder InfrastructureSetup


PassedGo to Infrastructure Setup ->Configuration Template and verifythat user is able to create a newconfiguration template for theProcessor type Unified CM andItem typeAppUser in Cisco PrimeCollaboration Provisioningsuccessfully

Create a newConfiguration Templatefor the Processor typeUnified CM and Itemtype App User underInfrastructure Setup


PassedGo to Infrastructure Setup ->Configuration Template and verifythat user is able to create a newconfiguration template for theProcessor type Unified CM andItem type Geo Location Filter inCisco Prime CollaborationProvisioning successfully

Create a newConfiguration Templatefor the Processor typeUnified CM and Itemtype Geo Location Filterunder InfrastructureSetup


PassedGo to Infrastructure Setup ->Configuration Template and verifythat user is able to create a newconfiguration template for theProcessor type Unified CM andItem type Directed Call Park inCisco Prime CollaborationProvisioning successfully

Create a newConfiguration Templatefor the Processor typeUnified CM and Itemtype Directed Call Parkunder InfrastructureSetup




PassedGo to Infrastructure Setup ->Configuration Template and verifythat user is able to create a newconfiguration template for theProcessor type Unified CM andItem type Feature Group Templatein Cisco Prime CollaborationProvisioning successfully

Create a newConfiguration Templatefor the Processor typeUnified CM and Itemtype Feature GroupTemplate underInfrastructure Setup


PassedGo to Infrastructure Setup ->Configuration Template and verifythat user is able to create a newconfiguration template for theProcessor type Unified CM andItem type Physical Location inCisco Prime CollaborationProvisioning successfully

Create a newConfiguration Templatefor the Processor typeUnified CM and Itemtype Physical Locationunder InfrastructureSetup


PassedGo to Infrastructure Setup ->Configuration Template and verifythat user is able to create a newconfiguration template for theProcessor type Unified CM andItem type UC Service in CiscoPrime Collaboration Provisioningsuccessfully

Create a newConfiguration Templatefor the Processor typeUnified CM and Itemtype UC Service underInfrastructure Setup


PassedGo to Device Setup and verify thatuser is able to view the respectiveerror message indication whileadding more than 5 Cisco UnifiedCommunications Manager toCisco Prime CollaborationProvisioning successfully

Error message indicationwhile adding more than5 Cisco UnifiedCommunicationsManager using DeviceSetup


PassedGo to Device Setup and verify thatuser is able to view the respectiveerror message indication whileadding more than 5 Cisco UnityConnection to Cisco PrimeCollaboration Provisioningsuccessfully

Error message indicationwhile adding more than5 Cisco UnityConnection usingDeviceSetup


PassedGo to Device Setup and verify thatuser is able to view the respectiveerror message indication whileadding more than 5 Cisco UnifiedCommunicationsManager IM andPresence to Cisco PrimeCollaboration Provisioningsuccessfully

Error message indicationwhile adding more than5 Cisco UnifiedCommunicationsManager IM andPresence using DeviceSetup




PassedGo to Infrastructure Setup ->Configuration Template and verifythat user is able to create a newconfiguration template for theProcessor type Unified CM andItem type Control Service underInfrastructure Setup in CiscoPrime Collaboration Provisioningsuccessfully

Create a newConfiguration Templatefor the Processor typeUnified CM and Itemtype Control Serviceunder InfrastructureSetup


PassedGo to Infrastructure Setup ->Configuration Template and verifythat user is able to create a newconfiguration template for theProcessor type Unified CM andItem type LDAP Directory underInfrastructure Setup in CiscoPrime Collaboration Provisioningsuccessfully

Create a newConfiguration Templatefor the Processor typeUnified CM and Itemtype LDAP Directoryunder InfrastructureSetup


PassedLogin to Cisco PrimeCollaboration Provisioning Serveras Admin through vSphere clientand verify that user is able toupgrade from 10.6 to 11.1successfully

Upgrade Cisco PrimeCollaborationProvisioning fromversion 10.6 to 11.1


PassedLogin to Cisco PrimeCollaboration Provisioning Serveras Admin through vSphere clientand verify that user is able toupgrade from 11.0 to 11.1successfully

Upgrade Cisco PrimeCollaborationProvisioning fromversion 11.0 to 11.1


PassedGo to Administration -> ScheduleSynchronization and verify thatuser is able to ScheduleSynchronization for a specifiedLDAP using Custom GranularSynchronization withSynchronization option as "Abortsynchronization on devicesynchronization failure" and checkthe results successfully

ScheduleSynchronization for aspecified LDAP usingCustom GranularSynchronization withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"




PassedGo to Administration -> ScheduleSynchronization and verify thatuser is able to ScheduleSynchronization for a specifiedCisco Unified CommunicationsManager using Custom GranularSynchronization withSynchronization option as "ForceDomain Synchronization" andcheck the results successfully

ScheduleSynchronization for aspecified Cisco UnifiedCommunicationsManager using CustomGranularSynchronization withSynchronization optionas "Force DomainSynchronization"


PassedGo to Administration -> ScheduleSynchronization and verify thatuser is able to ScheduleSynchronization for a specifiedCisco Unified CommunicationsManager using Custom GranularSynchronization withSynchronization option as "Rundevice synchronization in parallel"and check the results successfully

ScheduleSynchronization for aspecified Cisco UnifiedCommunicationsManager using CustomGranularSynchronization withSynchronization optionas "Run devicesynchronization inparallel"


PassedGo to Administration -> ScheduleSynchronization and verify thatuser is able to ScheduleSynchronization for a specifiedCisco Unified CommunicationsManager using Custom GranularSynchronization withSynchronization option as "Abortsynchronization on devicesynchronization failure" and checkthe results successfully

ScheduleSynchronization for aspecified Cisco UnifiedCommunicationsManager using CustomGranularSynchronization withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"


PassedGo to Administration -> ScheduleSynchronization and verify thatuser is able to ScheduleSynchronization for a specifiedCisco Unified CommunicationsManager IM and Presence usingCustomGranular Synchronizationwith Synchronization option as"Force Domain Synchronization"and check the results successfully

ScheduleSynchronization for aspecified Cisco UnifiedCommunicationsManager IM andPresence using CustomGranularSynchronization withSynchronization optionas "Force DomainSynchronization"




PassedGo to Administration -> ScheduleSynchronization and verify thatuser is able to ScheduleSynchronization for a specifiedCisco Unified CommunicationsManager IM and Presence usingCustomGranular Synchronizationwith Synchronization option as"Run device synchronization inparallel" and check the resultssuccessfully

ScheduleSynchronization for aspecified Cisco UnifiedCommunicationsManager IM andPresence using CustomGranularSynchronization withSynchronization optionas "Run devicesynchronization inparallel"


PassedGo to Administration -> ScheduleSynchronization and verify thatuser is able to ScheduleSynchronization for a specifiedCisco Unified CommunicationsManager IM and Presence usingCustomGranular Synchronizationwith Synchronization option as"Abort synchronization on devicesynchronization failure" and checkthe results successfully

ScheduleSynchronization for aspecified Cisco UnifiedCommunicationsManager IM andPresence using CustomGranularSynchronization withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"


PassedGo to Administration -> ScheduleSynchronization and verify thatuser is able to ScheduleSynchronization for a specifiedCisco Unity Connection usingCustomGranular Synchronizationwith Synchronization option as"Force Domain Synchronization"and check the results successfully

ScheduleSynchronization for aspecified Cisco UnityConnection usingCustom GranularSynchronization withSynchronization optionas "Force DomainSynchronization"


PassedGo to Administration -> ScheduleSynchronization and verify thatuser is able to ScheduleSynchronization for a specifiedCisco Unity Connection usingCustomGranular Synchronizationwith Synchronization option as"Run device synchronization inparallel" and check the resultssuccessfully

ScheduleSynchronization for aspecified Cisco UnityConnection usingCustom GranularSynchronization withSynchronization optionas "Run devicesynchronization inparallel"




PassedGo to Administration -> ScheduleSynchronization and verify thatuser is able to ScheduleSynchronization for a specifiedCisco Unity Connection usingCustomGranular Synchronizationwith Synchronization option as"Abort synchronization on devicesynchronization failure" and checkthe results successfully

ScheduleSynchronization for aspecified Cisco UnityConnection usingCustom GranularSynchronization withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"


PassedGo to Administration -> ScheduleSynchronization and verify thatuser is able to ScheduleSynchronization for a specifiedLDAP using Custom GranularSynchronization withSynchronization option as "ForceDomain Synchronization" andcheck the results successfully

ScheduleSynchronization for aspecified LDAP usingCustom GranularSynchronization withSynchronization optionas "Force DomainSynchronization"


PassedGo to Administration -> ScheduleSynchronization and verify thatuser is able to ScheduleSynchronization for a specifiedLDAP using Custom GranularSynchronization withSynchronization option as "Rundevice synchronization in parallel"and check the results successfully

ScheduleSynchronization for aspecified LDAP usingCustom GranularSynchronization withSynchronization optionas "Run devicesynchronization inparallel"


PassedGo to Infrastructure Setup ->Infrastructure Configuration andverify that user is able to addSystem Call Handlers for thespecified Cisco Unity Connectionin Cisco Prime CollaborationProvisioning installed at BE6000Sserver and validate the configuredSystem Call handlers is replicatedat Cisco Unity Connection WebGUI

Add and validate SystemCall Handlers for thespecified Cisco UnityConnection usingInfrastructureConfiguration




PassedGo to Infrastructure Setup ->Infrastructure Configuration andverify that user is able to addDirectory Handlers for thespecified Cisco Unity Connectionin Cisco Prime CollaborationProvisioning installed at BE6000Sserver and validate the configuredDirectory handlers is replicated atCiscoUnity ConnectionWebGUI

Add and validateDirectory Handlers forthe specified Cisco UnityConnection usingInfrastructureConfiguration


PassedGo to Infrastructure Setup ->Infrastructure Configuration andverify that user is able to addInterview Handlers for thespecified Cisco Unity Connectionin Cisco Prime CollaborationProvisioning installed at BE6000Sserver and validate the configuredInterview handlers is replicated atCiscoUnity ConnectionWebGUI

Add and validateInterview Handlers forthe specified Cisco UnityConnection usingInfrastructureConfiguration


PassedGo to Infrastructure Setup ->Infrastructure Configuration andverify that user is able to addCustom Recordings for thespecified Cisco Unity Connectionin Cisco Prime CollaborationProvisioning installed at BE6000Sserver and validate the configuredCustom Recordings is replicatedat Cisco Unity Connection WebGUI

Add and validate CustomRecordings for thespecified Cisco UnityConnection usingInfrastructureConfiguration


PassedGo to Infrastructure Setup ->Infrastructure Configuration andverify that user is able to addDirect Call Routing Rule for thespecified Cisco Unity Connectionin Cisco Prime CollaborationProvisioning installed at BE6000Sserver and validate the configuredDirect Call Routing Rule isreplicated at Cisco UnityConnection Web GUI

Add and validate DirectCall Routing Rule for thespecified Cisco UnityConnection usingInfrastructureConfiguration




PassedGo to Infrastructure Setup ->Infrastructure Configuration andverify that user is able to addForwarded Call Routing Rule forthe specified Cisco UnityConnection in Cisco PrimeCollaboration Provisioninginstalled at BE6000S server andvalidate the configured ForwardedCall Routing Rule is replicated atCiscoUnity ConnectionWebGUI

Add and validateForwarded Call RoutingRule for the specifiedCisco Unity Connectionusing InfrastructureConfiguration


PassedGo to Administration -> ProcessManagement and verify that useris able view the respectivemessage notification whilerestarting Apache(Web Server) inCisco Prime CollaborationProvisioning installed at BE6000Sserver successfully

Message notificationwhile restart ApacheServer through ProcessManagement atBE6000Sserver


PassedGo to Administration -> ProcessManagement and verify that useris able view the respectivemessage notification whilerestarting JBOSS(ApplicationServer) in Cisco PrimeCollaboration Provisioninginstalled at BE6000S serversuccessfully

Message notificationwhile restart JBOSSServer through ProcessManagement atBE6000Sserver


PassedGo to Administration -> ProcessManagement and verify that useris able view the respectivemessage notification whilerestarting NICE(ConfigurationEngine) in Cisco PrimeCollaboration Provisioninginstalled at BE6000S serversuccessfully

Message notificationwhile restart NICEService through ProcessManagement atBE6000Sserver


PassedGo to Administration -> ProcessManagement and verify that useris able view the respectivemessage notification whilerebooting Cisco PrimeCollaboration Provisioninginstalled at BE6000S serversuccessfully

Message notificationwhile reboot Cisco PrimeCollaborationProvisioning Serverthrough ProcessManagement atBE6000Sserver




PassedGo to Administration -> ProcessManagement and verify that useris able to view the respectivemessage notification whilerestartingAll Processes (Postgress,Apache(Web Server),JBOSS(Application Server),NICE(Configuration Engine)) atthe same time in Cisco PrimeCollaboration Provisioninginstalled at BE6000S serversuccessfully

Message notificationwhile restart AllProcesses (Postgress,Apache(Web Server),JBOSS(ApplicationServer),NICE(ConfigurationEngine)) at the same timethrough ProcessManagement atBE6000Sserver


PassedGo to Advanced Provisioning ->Batch Provisioning and verify thatuser is able to update MaximumWait Time For Host to 5 minutesfor Conference Now Service inCisco Prime CollaborationProvisioning installed at BE6000Sserver successfully

Update Maximum WaitTime For Host to 5minutes for ConferenceNow Service throughBatch file













PassedGo to Provisioning Setup andverify that user is able to create aService Template for DX650Endpoint Model under SpecifiedDomain in Cisco PrimeCollaboration Provisioningsuccessfully

Create a ServiceTemplate for DX650Endpoint Model underDomain throughProvisioning Setup at BE6000H Server








PassedGo to Provisioning Setup andverify that user is able to create aService Template for GenericDesktop Video Endpoint Modelunder Specified Domain in CiscoPrime Collaboration Provisioningsuccessfully

Create a ServiceTemplate for GenericDesktop Video EndpointModel under Domainthrough ProvisioningSetup at BE 6000HServer


PassedGo to Provisioning Setup andverify that user is able to create aService Template for GenericMultiple Screen Room SystemEndpoint Model under SpecifiedDomain in Cisco PrimeCollaboration Provisioningsuccessfully

Create a ServiceTemplate for GenericMultiple Screen RoomSystem Endpoint Modelunder Domain throughProvisioning Setup at BE6000H Server


PassedGo to Provisioning Setup andverify that user is able to create aService Template for GenericSingle Screen Room SystemEndpoint Model under SpecifiedDomain in Cisco PrimeCollaboration Provisioningsuccessfully

Create a ServiceTemplate for GenericSingle Screen RoomSystem Endpoint Modelunder Domain throughProvisioning Setup at BE6000H Server




PassedGo to Provisioning Setup andverify that user is able to create aService Template for Cisco Jabberfor Android EndpointModel underSpecified Domain in Cisco PrimeCollaboration Provisioningsuccessfully

Create a ServiceTemplate for CiscoJabber for AndroidEndpoint Model underDomain throughProvisioning Setup at BE6000H Server


PassedGo to Provisioning Setup andverify that user is able to create aService Template for Cisco Jabberfor iPhone Endpoint Model underSpecified Domain in Cisco PrimeCollaboration Provisioningsuccessfully

Create a ServiceTemplate for CiscoJabber for iPhoneEndpoint Model underDomain throughProvisioning Setup at BE6000H Server


PassedGo to Provisioning Setup andverify that user is able to create aService Template for Cisco Jabberfor Tablet Endpoint Model underSpecified Domain in Cisco PrimeCollaboration Provisioningsuccessfully

Create a ServiceTemplate for CiscoJabber for TabletEndpoint Model underDomain throughProvisioning Setup at BE6000H Server


PassedGo to Provisioning Setup andverify that user is able to create aService Template for Cisco Jabberfor Desktop EndpointModel underSpecified Domain in Cisco PrimeCollaboration Provisioningsuccessfully

Create a ServiceTemplate for CiscoJabber for DesktopEndpoint Model underDomain throughProvisioning Setup at BE6000H Server


PassedGo to Provisioning Setup andverify that user is able to create aService Template for CiscoTelePresence System EX60Endpoint Model under SpecifiedDomain in Cisco PrimeCollaboration Provisioningsuccessfully

Create a ServiceTemplate for CiscoTelePresence EX60Endpoint Model underDomain throughProvisioning Setup at BE6000H Server


PassedGo to Provisioning Setup andverify that user is able to create aService Template for CiscoTelePresence System EX90Endpoint Model under SpecifiedDomain in Cisco PrimeCollaboration Provisioningsuccessfully

Create a ServiceTemplate for CiscoTelePresence EX90Endpoint Model underDomain throughProvisioning Setup at BE6000H Server




PassedGo to Provisioning Setup andverify that user is able to create aService Template for CiscoTelePresence 1000 EndpointModel under Specified Domain inCisco Prime CollaborationProvisioning successfully

Create a ServiceTemplate for CiscoTelePresence 1000Endpoint Model underDomain throughProvisioning Setup at BE6000H Server





PassedGo to Provisioning Setup andverify that user is able to create aService Template for CiscoTelePresence 1300-47 EndpointModel under Specified Domain inCisco Prime CollaborationProvisioning successfully

Create a ServiceTemplate for CiscoTelePresence 1300-47Endpoint Model underDomain throughProvisioning Setup at BE6000H Server


PassedGo to Provisioning Setup andverify that user is able to create aService Template for CiscoTelePresence 1300-65 EndpointModel under Specified Domain inCisco Prime CollaborationProvisioning successfully











PassedGo to Provisioning Setup andverify that user is able to create aService Template for CiscoTelePresence System 500-32Endpoint Model under SpecifiedDomain in Cisco PrimeCollaboration Provisioningsuccessfully



PassedGo to Provisioning Setup andverify that user is able to create aService Template for CiscoTelePresence System 500-37Endpoint Model under SpecifiedDomain in Cisco PrimeCollaboration Provisioningsuccessfully



PassedGo to Provisioning Setup andverify that user is able to create aService Template for CiscoTelePresence Codec C40 EndpointModel under Specified Domain inCisco Prime CollaborationProvisioning successfully

Create a ServiceTemplate for CiscoTelePresence Codec C40Endpoint Model underDomain throughProvisioning Setup at BE6000H Server








PassedGo to Provisioning Setup andverify that user is able to create aService Template for CiscoTelePresence MX200 EndpointModel under Specified Domain inCisco Prime CollaborationProvisioning successfully

Create a ServiceTemplate for CiscoTelePresence MX200Endpoint Model underDomain throughProvisioning Setup at BE6000H Server




PassedGo to Provisioning Setup andverify that user is able to create aService Template for CiscoTelePresenceMX200G2EndpointModel under Specified Domain inCisco Prime CollaborationProvisioning successfully

Create a ServiceTemplate for CiscoTelePresenceMX200G2Endpoint Model underDomain throughProvisioning Setup at BE6000H Server


PassedGo to Provisioning Setup andverify that user is able to create aService Template for CiscoTelePresence MX300 EndpointModel under Specified Domain inCisco Prime CollaborationProvisioning successfully

Create a ServiceTemplate for CiscoTelePresence MX300Endpoint Model underDomain throughProvisioning Setup at BE6000H Server


PassedGo to Provisioning Setup andverify that user is able to create aService Template for CiscoTelePresenceMX300G2EndpointModel under Specified Domain inCisco Prime CollaborationProvisioning successfully

Create a ServiceTemplate for CiscoTelePresenceMX300G2Endpoint Model underDomain throughProvisioning Setup at BE6000H Server


PassedGo to Administration-> ScheduleSynchronization and verify thatuser is able to create and runSynchronization schedule withSynchronization type as "All" andSynchronization option as "ForceDomain Synchronization" in CiscoPrime Collaboration Provisioninginstalled at BE6000H Server

Create and runSynchronizationschedule withSynchronization type as"All" andSynchronization optionas "Force DomainSynchronization" atBE6000H Server


PassedGo to Administration-> ScheduleSynchronization and verify thatuser is able to create and runSynchronization schedule withSynchronization type as "All CallProcessors" and Synchronizationoption as "Force DomainSynchronization" in Cisco PrimeCollaboration Provisioninginstalled at BE6000H Server

Create and runSynchronizationschedule withSynchronization type as"All Call Processors" andSynchronization optionas "Force DomainSynchronization" atBE6000H Server




PassedGo to Administration-> ScheduleSynchronization and verify thatuser is able to create and runSynchronization schedule withSynchronization type as "AllMessage Processors" andSynchronization option as "ForceDomain Synchronization" in CiscoPrime Collaboration Provisioninginstalled at BE6000H Server

Create and runSynchronizationschedule withSynchronization type as"All MessageProcessors" andSynchronization optionas "Force DomainSynchronization" atBE6000H Server


PassedGo to Administration-> ScheduleSynchronization and verify thatuser is able to create and runSynchronization schedule withSynchronization type as "AllPresence Processors" andSynchronization option as "ForceDomain Synchronization" in CiscoPrime Collaboration Provisioninginstalled at BE6000H Server

Create and runSynchronizationschedule withSynchronization type as"All PresenceProcessors" andSynchronization optionas "Force DomainSynchronization" atBE6000H Server


Related DocumentationCisco VCS Control and Expressway

Deployment Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-7/Cisco-VCS-Cluster-Creation-and-Maintenance-Deployment-Guide-X8-7.pdf

Cisco IP Phone 7800 Series

Administration Guide:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7800-series/english/admin-guide/pa2d_b_7800-series-admin-guide-cucm.html

Cisco IP Phone 8800 Series


http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8800-series/english/adminguide/P881_BK_C136782F_00_cisco-ip-phone-8800_series/P881_BK_C136782F_00_cisco-ip-phone-8811-8841_chapter_01011.html

Cisco Unity Connection


http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/administration/guide/11xcucsagx.html


Test Results SummaryRelated Documentation








http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/administration/guide/11xcucsagx.html

Cisco Unified Communications Manager and Cisco Unity Connection

Integration Guide:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/integration/guide/cucm_sccp/cucintcucmskinny.html

Cisco Unified Survivable Remote Site Telephony


http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/SCCP_and_SIP_SRST_Admin_Guide/srst_roadmap.html

Cisco Jabber for Mac 11.0

Release Notes:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/mac/11_0/rn/JABM_BK_C915C45F_00_cisco-jabber-mac11-release-notes.html

Cisco Jabber for Windows 11.0

Release Notes:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/11_0/RN/JABW_BK_C5E7828C_00_cisco-jabber-windows-11-release-notes.html

Cisco TelePresence Video Communication Server

Configuration Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-7/Cisco-VCS-Basic-Configuration-Single-VCS-Control-Deployment-Guide-X8-7.pdf

Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/release_note/Cisco-VCS-Release-Note-X8-7.pdf

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/install_guide/Cisco-VCS-Virtual-Machine-Install-Guide-X8-7.pdf

Mobile and Remote Access Deployment Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-7/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-7.pdf

Cisco TelePresence Management Suite


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/admin_guide/Cisco-TMS-Admin-Guide-15-1.pdf

Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/release_note/Cisco-TMS-release-notes-15-1.pdf























Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/install_guide/Cisco-TMS-install-guide-15-1.pdf

Cisco TelePresence Conductor


http://www-author.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/admin_guide/TelePresence-Conductor-Admin-Guide-XC4-1.pdf

Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/release_note/TelePresence-Conductor-Release-Notes-XC4-1.pdf

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/install_guide/TelePresence-Conductor-Virtual-Machine-Install-Guide-XC4-1.pdf

Cisco TelePresence Server

Configuration Guide:

http://www.cisco.com/en/US/docs/telepresence/infrastructure/ts/deployment_guide/Cisco_TelePresence_Server_Deployment_Guide.pdf

Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/release_note/Cisco-TelePresence-Server-Software-Release-Notes-4-2-4-23.pdf

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Cisco_TelePresence_Server_7010_Installation_Guide.pdf

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Cisco-TelePresence-Server-on-Virtual-Machine-Install-Guide-4-1-2-29.pdf

Cisco Jabber Guest


http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Guest/10_6/ag/JABC_BK_C5AE0E46_00_cisco-jabber-guest-106-administration.pdf

Installation Guide:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Guest/10_6/icg/JABC_BK_JF2738FB_00_jabber-guest-server-106-installation.pdf

Cisco TelePresence Multipoint Control Unit

Installation and Upgrade Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/install_guide/mcu_deployment_guide_4-5.pdf

Release Notes:

























http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/release_note/Cisco-TelePresence-MCU-Software-release-notes-4-5-1-72.pdf

Cisco DX70 and DX80

User Guide:

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/dx/dx70/user/1025/en/dx70-dx80-user-guide-1025.pdf


http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/dx/series/admin/1025/DX00_BK_CB112361_00_cisco-dx-series-ag-1025.html

Release Notes:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/dx/series/rel-notes/1025/dx00_b_release-notes-dx-series-1025.html

Cisco Prime Collaboration Provisioning


http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-1/Provisioning/install_upgrade/guide/Cisco_Prime_Collaboration_Provisioning_Install_and_Upgrade_Guide_11_1.pdf

Cisco Prime Collaboration Assurance and Analytics


http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-1/assurance/inst_upg/guide/cpco_b_Cisco_Prime_Collaboration_Assurance_and_Analytics_Install_and_Upgrade_Guide_11_1.pdf

















Documents

Test Results for Cisco Unified Communications System Release … · Cisco Unified Communications System Test for Japan CiscoUnifiedCommunicationsSystemTestforJapan,inturnisanadd-ontestingatthesolutionlevel,where