Test Results for Cisco Unified Communications Solution Release … · CHAPTER 1 Cisco Unified Communications System Test • CiscoUnifiedCommunicationsSystemTest, page 1 • CiscoUnifiedCommunicationsSystemTestforJapan,

Test Results for Cisco Unified Communications Solution Release 11.5for JapanFirst Published: July 12, 2016

Last Modified: July 14, 2016

Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000 800 553-NETS (6387)Fax: 408 527-0883

© 2016 Cisco Systems, Inc. All rights reserved.

C O N T E N T S

C H A P T E R 1 Cisco Unified Communications System Test 1

Cisco Unified Communications System Test 1

Cisco Unified Communications System Test for Japan 2

Acronyms 3

C H A P T E R 2 Test Topology and Environment Matrix 11

Test Topology 12

Environment Matrix 13

Open Caveats 18

What's New? 19

C H A P T E R 3 Test Results Summary 29

Cisco Unified Communications Manager 29

Cisco Unity Connection 35

Cisco Unified Communications Manager IM & Presence Service 38

Cisco IP Phone 40

Cisco Jabber for iPhone and iPad 45

Cisco Jabber for Android 52

Cisco Jabber for Windows 65

Cisco Jabber for Mac 72

Cisco Spark 79

Cisco Jabber Guest 83

Cisco TelePresence Video Communication Server 89

Cisco TelePresence Multipoint Control Unit 130

Cisco TelePresence Management Suite 138

Cisco TelePresence Conductor 145

Cisco TelePresence Server 155

Cisco TelePresence Content Server 167

Test Results for Cisco Unified Communications Solution Release 11.5 for Japan iii

Cisco Prime Collaboration 175

Cisco Prime Collaboration Analytics 175

Cisco Prime Collaboration Assurance 197

Cisco Prime Collaboration Provisioning 216

Related Documentation 259

Test Results for Cisco Unified Communications Solution Release 11.5 for Japaniv

Contents

C H A P T E R 1Cisco Unified Communications System Test

• Cisco Unified Communications System Test, page 1

• Cisco Unified Communications System Test for Japan, page 2

• Acronyms, page 3

Cisco Unified Communications System TestCisco Unified Communications Solution Test, an integral part of the Enterprise Voice Solution Managementis a program that validates and tests specified system-level solution for the various products and platforms inthe Cisco Unified Communications System.

Cisco Unified Communications Solution Test, the systems integration layer, ensures that the UnifiedCommunications components delivered across the various engineering teams, when combined, improves theUnified Communications System software quality. This is achieved by testing the different components.

The requirements for Cisco Unified Communications Solution Test is derived based on the following:

• Popular customer scenarios

• Input from various Business Units, fields and Cisco Services

The test bed architecture is built based on the Solution Reference Network Design (SRND), cross-section ofproduct deployment models etc. The different types of testing carried out as a part of Cisco UnifiedCommunications Solution Test are:

• Interoperability/Compatibility

• Functionality

• Availability/Reliability/Stability

• Performance/Scalability/Capacity

• Usability/Serviceability

• Special focus area - CAP (Customer Assurance Program)/Technical Assistance Center (TAC)

• Security

Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 1

Cisco Unified Communications System Test for JapanCisco Unified Communications Solution Test for Japan, in turn is an add-on testing at the solution level,where the requirements gathered are specific to Japanese usage and market. The requirements are derivedbased on the following:

• Customer found defects in selected UC products

• High priority cases that are covered by the Cisco Unified Communications Solution Test team

• Inputs from SE's and TAC team of Cisco Japan

The test execution is carried out on selected UC products, which affects the Japanese segment and that areprioritized by SE's of the Cisco Japan team. Japanese specific equivalents such as Japanese locale, ISDNSwitch type being NTT and JPNP for Numbering Plan are implemented.

The objective of Cisco Unified Communications Solution Test for Japan is to run a sub-set of solution testingthat is not covered by Cisco Unified Communications Solution Test and implement equivalents with Japaneseenvironment such as Japanese OS, localized application, selected Cisco Compatible Products and third partyequipment.

In this Cisco Unified Communications Solution Test release for Japan, the following components are tested.

• Cisco Unified Communications Manager

• Cisco Unity Connection

• Cisco Unified Communications Manager IM & Presence Service

• Cisco IP Phones

• Cisco Jabber for iPhone and iPad

• Cisco Jabber for Android

• Cisco Jabber for Mac

• Cisco Jabber for Windows

• Cisco Spark

• Cisco Unified Survivable Remote Site Telephony

• Cisco TelePresence Video Communication Server

• Cisco TelePresence Video Communication Server Expressway

• Cisco TelePresence Content Server

• Cisco TelePresence Multipoint Control Unit

• Cisco TelePresence Management Suite

• Cisco TelePresence Conductor

• Cisco TelePresence Server

• Cisco Jabber Guest

• Cisco Prime Collaboration

Test Results for Cisco Unified Communications Solution Release 11.5 for Japan2

Cisco Unified Communications System TestCisco Unified Communications System Test for Japan

AcronymsDescriptionAcronym

Advanced Audio Coding - Low DelayAAC-LD

Automated Alternate RoutingAAR

Automatic Call DistributionACD

Alternate Contact NumberACN

Active DirectoryAD

Automatic Gain ControlAGC

Audible Message Waiting IndicatorAMWI

Alternate Network Address TranslationANAT

Access PointAP

Adaptive Security ApplianceASA

American Standard Code for Information InterchangeASCII

Analog Telephone AdapterATA

Bulk Administration ToolBAT

Business EditionBE 6000H

Binary Floor Control ProtocolBFCP

Busy Lamp FieldBLF

Basic Service Set IdentifierBSSID

Certificate AuthorityCA

CDR Analysis and ReportingCAR

Channel Associated SignalingCAS

Cisco Administrative XMLCisco AXL

Call Control DiscoveryCCD

Cisco Desktop AdministratorCDA

Cisco Discovery ProtocolCDP

Call Detail RecordCDR

Caller Entered DigitsCED

Call Forward AllCFA

Call Forward BusyCFB

Call Forward No AnswerCFNA


Cisco Unified Communications System TestAcronyms

DescriptionAcronym

Call Forward UnregisteredCFUR

Cisco Jabber for AndroidCJA

Cisco Jabber for iPhoneCJI

Cisco Jabber for MacCJM

Cisco Jabber for iPadCJIPad

Cisco Jabber for WindowsCJW

Command Line InterfaceCLI

Calling Line IdentificationCLID

Client Matter CodeCMC

Call Management RecordCMR

Cross-Origin Resource SharingCORS

Clustering over WANCoW

Cisco Prime CollaborationCPC

Client Services FrameworkCSF

Cisco Collaboration Systems ReleaseCSR

Cross Site Request ForgeryCSRF

Calling Search SpaceCSS

Computer Telephony InterfaceCTI

Computer Telephony IntegrationCTI

Certificate Trust ListCTL

Cisco Unified Border ElementCUBE

Cisco Unity ConnectionCUC

Cisco Unified Communications ManagerCUCM

Cisco Unified PresenceCUP

Cisco Unified Customer Voice PortalCVP

Cisco WebEx Meetings ServerCWMS

Directed Call ParkDCP

Device and Credential RepositoryDCR

Dynamic Host Configuration ProtocolDHCP

Direct In-Ward DialingDID

Directory NumberDN



DescriptionAcronym

Dialed Number AnalyzerDNA

Do Not DisturbDND

Domain Name ServerDNS

Delayed OfferDO

Digital Private Network Signaling SystemDPNSS

Disaster Recovery SystemDRS

Differentiated Services Code PointDSCP

Device Work CenterDWC

Elliptical Curve Digital Signature AlgorithmECDSA

Extended Display Identification DataEDID

Emergency Location Identification NumberELIN

Enterprise License ManagerELM

Extension MobilityEM

Extension Mobility Cross ClusterEMCC

Early OfferEO

Cisco Enhanced Survivable Remote Site TelephonyE-SRST

Extract Transform LoadETL

Forced Authorization CodeFAC

Federal Information Processing StandardsFIPS

Fully Qualified Domain NameFQDN

Foreign Exchange OfficeFXO

Foreign Exchange StationFXS

Graphical User InterfaceGUI

GatewayGW

High AvailabilityHA

High DefinitionHD

Historical ReportingHR

Cisco Hosted Collaboration SolutionHCS

Hyper Text Markup LanguageHTML

Hypertext Transfer ProtocolHTTP

Hypertext Transfer Protocol SecureHTTPS



DescriptionAcronym

Inter Cluster TrunkICT

Identity ProviderIdP

Instant MessagingIM

IP Phone MessengerIPPM

IP Service Level AgreementsIPSLA

Integrated Services Digital NetworkISDN

Indian Standard TimeIST

Initial Trust ListITL

Interactive Voice ResponseIVR

Key Expansion ModuleKEM

Log Collection CenterLCC

Lightweight Directory Access ProtocolLDAP

Light Emitting DiodeLED

Media Convergence ServerMCS

Multipoint Control UnitMCU

Multi-Device MessagingMDM

MultiDimensional eXpressionsMDX

Managed File TransferMFT

Media Gateway Control ProtocolMGCP

Multilevel Precedence and PreemptionMLPP

Music On HoldMOH

Mobile and Remote AccessMRA

Media Resource Group ListMRGL

Managed Service ProviderMSP

Maximum Transmission UnitMTU

Message Waiting IndicatorMWI

Network Application ManagementNAM

Network Address TranslationNAT

Network Interface and Configuration EngineNICE

Non Linear ProcessingNLP

New Technology LAN Manager version 2NTLMv2



DescriptionAcronym

Network Time ProtocolNTP

One Button To PushOBTP

Operations ManagerOM

On Screen DisplayOSD

Peer-to-PeerP2P

Product Authorization KeyPAK

Personal Communication AssistantPCA

Prime Collaboration DeploymentPCD

PC over IPPCoIP

Personal Identification NumberPIN

Personal MultipartyPMP

Plain Old Telephony SystemPOTS

Primary Rate InterfacePRI

Provisioning Northbound InterfaceProvisioning - NBI

Problem Reporting ToolPRT

Public Switched Telephone NetworkPSTN

Quality Report ToolQRT

Q-Signaling protocolQSIG

Route GroupRG

Remote Desktop ProtocolRDP

Really Simple SyndicationRSS

Real Time Control ProtocolRTCP

Real Time Monitoring ToolRTMT

Realtime Transport ProtocolRTP

Security Assertion Markup LanguageSAML

Skinny Client Control ProtocolSCCP

Severely Conceal Seconds RatioSCSR

Standard DefinitionSD

Selsius Ethernet PhoneSEP

Secure File Transfer ProtocolSFTP

Session Initiation ProtocolSIP



DescriptionAcronym

Small and Midsize BusinessSMB

Shared MultipartySMP

Short Message ServiceSMS

Simple Network Management ProtocolSNMP

Simple Mail Transfer ProtocolSMTP

Cisco Unified Survivable Remote Site TelephonySRST

Secure ShellSSH

Service Set IdentifierSSID

Secure Socket LayerSSL

Single Sign OnSSO

Technical Assistant CenterTAC

Transmission Control ProtocolTCP

TelePresence Content ServerTCS

Transport Layer SecurityTLS

TelePresence Management SuiteTMS

TelePresence Management Suite Provisioning ExtensionTMSPE

Time of Day RoutingTODR

Cisco TelePresence ServerTPS

Trust Relay PointTRP

TelePresence ServerTS

Telephony User InterfaceTUI

Unified Computing SystemUCS

User Datagram ProtocolUDP

User Data ServicesUDS

Unified Messaging GatewayUMG

Cisco Unified Communications ManagerUnified CM

Uniform Resource IdentifierURI

Coordinated Universal TimeUTC

Cisco TelePresence Video Communication ServerVCS

Voice GatewayVGW

Virtual MachineVM



DescriptionAcronym

Voice Mail NotificationVMN

View Mail for OutlookVMO

Voice over IPVoIP

Voice Profile for Instant MessagingVPIM

Virtual Private NetworkVPN

Video SLA Assessment AgentVSAA

TelePresence Server on VMVTS

Wide Area NetworkWAN

Wireless FidelityWi-Fi

Extensive Application Programming InterfacexAPI

Extensible Markup LanguageXML

Extensible Messaging and Presence ProtocolXMPP





C H A P T E R 2Test Topology and Environment Matrix

• Test Topology, page 12

• Environment Matrix, page 13

• Open Caveats, page 18

• What's New?, page 19


Test TopologyFigure 1: Topology in Use


Test Topology and Environment MatrixTest Topology

Environment MatrixVersionComponentApplications

11.5.0.99837-3VersionCisco UnifiedCommunications Manager

Call Control

11.5.2.9902-201Locale

3-1-9.JPDial Plan

10.5VersionCisco Unified SurvivableRemote Site Telephony(SRST) 15.6.2 TIOS

X8.8 Alpha 5VersionCisco Telepresence VideoCommunication ServerExpressway (VCSExpressway)

vcs-lang-ja-jp_8.5-1_amd64.tlpLocale

X8.8 Alpha 5VersionCisco TelePresence VideoCommunication Server(VCS) vcs-lang-ja-jp_8.5-1_amd64.tlpLocale

11.5.0.99837-2VersionCisco UnifiedCommunications ManagerIM and Presence Service

Applications

11.5.0.9901-17Locale

11.5.0.99837-3VersionCisco Unity ConnectionVoice Mail andUnified Messaging

11.5.0.1-295Locale

11.5.69010VersionCisco Prime CollaborationAssurance & Analytics

NetworkManagement

11.2.0.523VersionCisco Prime CollaborationProvisioning


Test Topology and Environment MatrixEnvironment Matrix

VersionComponentApplications

11-0-1-11Cisco IP Phone7811/21/41/61

End Point

9-4-2SR1-1Cisco Unified IP Phone7942/62/75

1-4-7-3Cisco Unified Wireless IPPhone 7925/26

10-3-1SR2-2Cisco Unified IP ConferencePhone 8831

11-0-1-11Cisco IP Phone8811/41/45/51/61/65

11-0-2HER-56Cisco IP Phone 8821

9-4-2SR2-2Cisco Unified IP Phone8941/45

9-4-2SR2-2Cisco Unified IP Phone9951/71

TC7.3.6EX60 - Cisco TelePresenceSystem EX60

TC7.3.6EX90 - Cisco TelePresenceSystem EX90

CE 8.1.1SX20 - Cisco TelePresenceSX20 Quick Set

CE 8.1.1SX80 - Cisco TelePresenceSX80 Codec

CE 8.1.1SX10 - Cisco TelePresenceSX10 Quick Set

TC 7.3.6C90 - Cisco TelePresenceSystem Integrator PackageC90

TX6.1.11(1)500-32 - Cisco Tele PresenceSystem 500 - 32

TX6.1.11(1)TX9000 - CiscoTelePresenceSystem TX9000

CE 8.1.1MX200-G2 - CiscoTelePresence MX200-G2

CE 8.1.1MX300-G2 - CiscoTelePresence MX300-G2

IX8.1.1(59)




IX5000 - Cisco TelePresenceIX5000

10.2.5DX650 - Cisco DX650

10.2.5DX70 - Cisco DX70

10.2.5DX80 - Cisco DX80

CE 8.2.0 pre Alpha 3Cisco TelePresence DX70

CE 8.2.0 pre Alpha 3Cisco TelePresence DX80

15.6.2 TIOSISR Gateways (3945e,3925e, 3945, 2921)

CommunicationsInfrastructure

3.16.2SIOSISR 4451-X

15.6.2 TCisco Unified BorderElement for ISR

15.0.2-SE 5Cisco 3750 PoE Switch

ESXi 5.1.0 , 5.5.0vCenter Server

5.2(2 a)M9500MDS Switch

15.2.1VersionCisco TelePresenceManagement Suite - TMS

TelePresence

4.5 (1.85)VersionMCU 4510, 5310 and 5320- Cisco TelePresence MCU

MCU_4-3_UI_and_audio_JPN.packageLocale

4.3(1.13)VersionCisco TelePresence Server

XC4.2VersionCisco TelePresenceConductor

4.3(1.13)VersionCisco TelePresence Server7010

v7.1 Build 4262VersionCisco TelePresence ContentServer

S5.0_language_packs.zipLocale

15.3VersionWireless Access Point 1142Wireless andMobility




11.7.0.236049VersionCisco Jabber for MacMessagingApplications

11.6.0.35037VersionCisco Jabber for Windows

11.6.1.236312 - 64 bit (iPhone5 andiPad)

VersionCisco Jabber for iOS

11.6.1.236312 - 64 bit (iPhone6 andiPhone6S)

Apple iOS 9.3.2(13F69)iPhone 5/6/6S

Apple iOS 9.3.2(13F69)iPad

Apple iOS 9.3.2(13F69)iPad Pro/Air

Apple iOS 2.2.1(13V420)Apple Watch

11.6.0.236802VersionCisco Jabber for Android

Android OS 5.0.1Galaxy S4


Android OS 5.0.2XperiaZ1/Z3/Z3+

Android OS 6.0.1Nexus 5X

Android OS 5.1.1Sony Tab

Android OS 5.1.1Sony Watch

10.6.9.13Version forWindows

Cisco Jabber Guest

Windows OS 7Windows

10.6.9.17Version for Mac

Mac OS 10.10.5Mac

10.6.9.30Version for iOS

Apple iOS 9.1 (13B143)iPhone 5/6

Apple iOS 9.2(13C75)iPad

10.6.9.51Version forAndroid


Android OS 5.0.2Xperia Z1

1.0.0.3021Version forWindows

Cisco Spark

1.3506Version for Mac




Version for iOS 1.26(13325)

Apple iOS 9.1 (13B143)iPhone 5/6

Apple iOS 9.2(13C75)iPad

1.10.2382Version forAndroid


Android OS 5.0.2Xperia Z1

4215Version forWeb

2.2(3d)CiscoUCS6140Fabric InterconnectPRIMARY

UCS

2.2(3d)CiscoUCS6140Fabric InterconnectSUBORDINATE

2.2(3d)CiscoUCS6140Fabric Cluster

ESXi 5.1.0, 5.5.0B-Series ServerESXi Host

ESXi 5.1.0, 5.5.0 and 6.0C-Series Server

Windows 7-SP1 (Japanese)Windows 7-SP1Operating SystemClient

Windows 8/8.1 (Japanese)Windows 8/8.1

Windows 10 (Japanese)Windows 10

10.10.5 (Japanese)Mac

IE 10, 11 (Supported Japaneselanguage)

IEBrowser

Firefox 44.0, 45.0, Firefox ESR 31,38 (Supported Japanese language)

Mozilla

Chrome 48 or later (SupportedJapanese language)

Chrome

8.0.8, 9.0Safari




Windows Server 2008 (R2 Enterprise- Japanese)

Microsoft Windows ServerServer

Windows Server 2012 (R2 Enterprise- Japanese)

2013 SP1Microsoft Exchange Server

2.5.1.28.BCisco WebEx MeetingsServer

11.0.1.10000-103Cisco MediaSense

10.6.11Jabber Guest

Open CaveatsTitleDefect ID

Cisco IP Phone

Feature is unavailable message is displayingCSCuz14699

Phone URL Page not displaying Network Locale versionCSCuz82110

Alert Name and Display ID is not displayed in 8821 PhoneCSCuz85661

Cisco Jabber for Android

During group chat notification is getting from CJW when CJA "DND"status

CSCuz83408

Customizing in custom user text is taking Unlimited words (text words)CSCuz85024

Cisco TelePresence Video Communication Server

Hold information not displayed in DX Series phonesCSCux25293

Shows far end call is been hold in call participant tab (DX70)CSCuz71479

Japanese display name is not displayed in DX70 with Japanese localeCSCuz80132

Background screen goes blackwhen language changed during call in DX80CSCux51519

Call is not muted while retrieving (EX90) first line in share LineCSCuz75359

Locale Changes automatically while user has logout of TCSCSCuz53989

Mute notification is not displayed in SX10 Quick setCSCuz81984


Test Topology and Environment MatrixOpen Caveats

What's New?Cisco Spark

Cisco Spark helps modern teams work together. Sign in to create rooms with groupmessaging, content sharing,video calling, and desktop sharing. Instant workspaces for your teams. Add files to group and 1-to-1 chat.Tap and it's a video call. Share your screen any time. Things get done fast with Cisco Spark. Keep it runningon all your devices and get notified when people add to the conversation. Short on time? Run a search or usefilters to see where you're needed most.

Cisco IP Phone 8821/8845/65

The Cisco IP Phone 8821/8845/65 is highly affordable and secure, and easy to use. Employees can also takeadvantage of telephony integration with their personal mobile devices, providing them with more flexible andconvenient ways of working. In addition to video calls, Cisco IP Phone 8821/8845 and 8865 function muchlike a digital business phone, allowing you to place and receive calls and to access basic features such as mute,hold, transfer, speed dial, call forward and more.

Cisco Prime Collaboration Provisioning 11.5

Quick Service Provisioning for Existing Users

The Quick Service Provisioning feature offers an easy and quick way to provision services for existing userswithout going through the legacy ordering wizard that has multiple steps. A new dialog box called ProvisionServices is included in the User Provisioning page to perform quick service provisioning for existing users.In addition, a new button calledCustom ServicesWizard in the user record page allows the users to provisionthe services in the legacy way.

Unified Communications Device Support

The following versions of the Unified Communications devices are newly supported:

• Cisco Unified Communications Manager 11.5

• Cisco Unity Connection 11.5

• Cisco IM and Presence 11.5

• Cisco Unified Communications Manager Express 11.5

• Cisco Unity Express 11.5

Root Access

Root access is disabled from Cisco Prime Collaboration 11.5. As a result, many procedures requiring rootaccess, can now be performed from the user interface.

Process Management

Using process management you can restart services such as Apache, JBOSS, and NICE from user interface.You have option to reboot linux server and restart Cisco Prime Collaboration Provisioning application fromuser interface. Process management also lists the details such as the restart history to view when and wherestarted the service.


Test Topology and Environment MatrixWhat's New?

Scheduled Synchronization

The Scheduled Synchronization command line script utility is now migrated to user interface. Using schedulesynchronization you can schedule periodic processor and domain synchronization from UI. In addition, youcan edit and delete existing synchronization jobs and view details such as the job status, synchronization statusand so on.

SSL Certificate- Enhancements

In Cisco Prime Collaboration Provisioning you can generate, download, and view the certificates. You canalso upload provisioning and LDAP certificates.

Cisco TelePresence MCU 5320

Cisco TelePresence MCU 5320 is a range of technology advanced and Powerful Multipoint control unitsdesigned to combine continues presence at high definition and the highest possible voice quality. MCU canbe clustered and has a flexible port capacity allowing scalability, it provides an entry-level appliance andflexible port that enables your video deployment to grow as your telepresence usage accelerates. Compatiblewith all major vendors standard- and high-definition (SD and HD, respectively) endpoints, it delivers the bestexperience for each participant, every time.

Cisco MCU 5320 platform supports 40 HD ports video and 20 Full HD ports video. Easy to use and versatilemanagement interface.it provides upscale SD resolution using cisco clear vision technology it is compatiblewithMicrosoft office communication server via cisco telepresence video communication server. It is predictableport capacity and bandwidth per site up to 4 Mbps.

Cisco TelePresence Content Server

The Cisco TelePresence Content Server simplifies the process of capturing and sharing many types of contentthroughout your organization. It includes training sessions, meetings and any critical events. With CiscoTelePresence Content Server your organization can record and stream high quality video and content for liveand on demand access.

You can also distribute your content, live or record, to any PC or portable media device or to Cisco Show andShare. Based on industrial standards, the TelePresence Content Server interoperates with Cisco and third partyH.323 and Session Initiation Protocol (SIP) based video endpoints and multiparty bridges Cisco TelePresenceServer and Cisco TelePresence multipoint control units (MCUs) can connect to it, as well, to enable live andon-demand video streaming.

It captures video and presentations for live streaming and video-on-demand viewing, compatible with CiscoTelePresence or third party standards based video endpoints. It allows for basic video editing and sharingfunctionality using simple web interface.

Cisco TelePresence IX5000

The Cisco TelePresence IX5000 Series is the industry's first H.265 triple-screen product. Participants canshare multiple content sources on three 70-inch LCD screens. 4K cameras can "unskew" video images inwhiteboard mode for remote participants, allowing flexible whiteboard placement. Stand-up mode letsparticipants move about the room. The IX500 features a sleek, new industrial design that's inviting and easyto use. Integrated lighting delivers superior video images, eliminating the need for external light reflectorsand room remediation.



Cisco Business Edition 6000

Cisco BE6000 platforms are built on virtualized Cisco Unified Computing System™ (Cisco UCS® ) products,which are designed for performance and density over a wide range of company sizes and business workloads.There are three models:

• BE6000H: Supports nine collaboration application options in a single virtualized server platform;maximum capacity of 1000 users, 2500 devices, and 100 contact center agents. Ideal for medium-scaleend-to-end collaboration deployments

• BE6000M: Supports five collaboration application options in a single virtualized server platform;maximum capacity of 1000 users, 1200 devices, and 100 contact center agents. Ideal for medium-scaleend-to-end collaboration deployments

• BE6000S: Supports five fixed collaboration applications on an integrated router/gateway/virtualizedblade server platform; maximum capacity of 150 users and 300 devices. Ideal for small-scale "office ina box" collaboration deployments

The Cisco BE6000 is a packaged solution that comes pre-loaded with virtualization and applications softwareand is pre-configured with core UC applications. Simply turn on additional collaboration applications as yourbusiness needs grow.

Cisco Business Edition 7000

Cisco BE7000 platforms are built on virtualized Cisco Unified Computing System™ (Cisco UCS®) products,which are designed for performance and density over a wide range of business workloads

• BE7000M: this medium-density model typically supports between four to six collaboration applicationsin deployments sized for 1000 to 5000 users, 3000 to 15,000 devices, and multiple sites. For morecapacity to support larger sized deployments, simply stack additional servers. And in smaller sizeddeployments with less than 1000 users, typically more applications can be supported per server

The enterprise-class Cisco UCS C240 M4 Rack-Mount Server family packages advanced performance withenergy efficiency of the Intel Xeon processor E5-2600 v3 product family in a 2-rack-unit (2RU) form factor.BE7000 platformmodels ship with a preinstalled virtualization hypervisor and preloaded software applicationsthat are ready to deploy.

Test Coverage

New FeaturesComponents

Search & Show Display Name fieldCisco Unified CommunicationsManager

Common PIN UCM & UxN

Directory Search LDAP for Edge clients

Location-Based Service on UCM

Product RebrandingCisco TelePresence VideoCommunication Server

Virtual Machine

Serviceability/Operational Enhancement

Common PIN Unity ConnectionCisco Unity Connection



Schema with enhancements for both UCM and IM&PCisco Unified CommunicationsManager IM & Presence Service

GE Phase II for UCM (Tomcat, SIP Proxy for IMP, XMPP)

AD Group Support for IM/P Roster

Long Line LabelCisco IP Phone

DND Status Display

Call Barge in 78xx

New Font and Font Size Change

Add VM Audio Back

Call Barge in 88xx

Broadcast IMCisco Jabber for Windows

Chat alert sound menu

Windows 10 support - Jabber for Windows (Outlook/ Exchange/WebEx)

Multi-Device Messaging (MDM)

Hunt groups

Custom/HTML TabsCisco Jabber for Mac

Locations

Group Pickup

Persistent Chat - Administration and Management

Alert when Available

Broadcast IM

Call With Edit

Custom Ringer

Hunt groups

User name Read only at Sign-in


Persistent Chat Room Discovery and Enrolment

Persistent chat HA Support



Broadcast IMCisco Jabber for iPhone and iPad

Default Audio Output

Jail break

Multi device messaging for Cloud

Expanded Device Support

App on Apple Watch

iOS 9 Support

Admin settings to change the default behavior of a contacts

Support 3D touch on home screen (iPhone 6S)

Support 3D touch on Chats (iPhone 6S)

Chat with Dictation (Apple Watch)

Jabber in Glances screen (Apple Watch)

Broadcast IMCisco Jabber for Android

Default Audio Output

Jail break

Custom Ringtone

Notification on Android Wear and Reply IM Message

Android Wear Improvement

Admin settings to change the default behavior of a contacts

More Emoticons [CSCuq16032]

UE improvement on CMR/ PMR meeting

Enable PRT configuration via bootstrap


1:1 Chat and Group ChatCisco Spark

Video Call

Screen Sharing

File Sharing

Cloud Extensions and Calendar Fusion Service

Call Connector Fusion Service

@mentions



Opus Codec SupportCisco Jabber Guest

Content Share Statistics

Start Call without Video

Auto Start Call

1080p presentation locally and in call (SX10)Collaboration Endpoint Software

Support for OSD active mode (SX20)

Warning on screen regarding Touch 8” and TRC-5 (SX20)

Support for WUXGA(SX80)

MultiStream Conferencing (Hybrid)

Full Cisco Proximity support

OSD and Touch UI refresh (Symphony)

In-Room Control

Multistream Support

Presenter Track

Full screen audio avatar removed

Encrypted iX support

Proximity sharing of mouse pointer

Direct sharing to far end

Minor New Features:

List of discontinuations in CE8.0.0 from TC7.3.x

New Microphone LED behaviour

Setup Assistant requires authentication

API changes

Remote monitoring (web snapshots)

UI changes in active mode

Measure ultrasound-pairing quality using the VU meter

Provision endpoints to use HTTPS only from CUCM

Snap to Whiteboard improvements

Touch UI Update



Access to call statisticsCisco DX Series

Contacts search

HDMI Audio

SIP URI

Stay in PC mode

USB Redirect

Use the System While an Outgoing Call is Ringing

Alternate Phone Book Server

FIPS mode

Support Active Meeting ManagerCisco TelePresence Conductor

New Page under Conference Configuration

Usage Reporting and Statistics Collection

2048-bit Encryption

Localization / Internationalization

Temporary Multi-Party Licensing

Multi-Party License Compliance Banner

Increased 410v capacityCisco TelePresence Server

Changes to vTS operating system

Customizable audio prompts

New lobby screen image

New PIN entry process

Presenter Icon

Streamlined conference entry

Customizable lobby screen

New audio prompts

Conductor FailoverCisco TelePresence Management Suite

Support for CE endpoints running CE8.2

Support for ESXi 6.0



Upgrade Support from 11.0, 11.1 to 11.2Cisco Prime Collaboration Provisioning

Support Activate/Deactivate Serviceability on CUCM throughBatch

Add Access Control in User Provisioning

Support Service Activation on IM&P through Batch

Enterprise Phone Configuration

UC Communication Enhancements

Default values for EM Templates

Security FIPS Gap Closure

Keyword Feature

Support Enterprise Parameter via Batch

Batch Ordering Continue on Failure on Day 2 Object

Notification Devices Provisioning for CUC

Fix LDAP import and filtering gaps requests

Security: Address FIPS gapsCisco Prime Collaboration Assurance

New device support

Prime collaboration essential for BE

QIP Enhancements

MSP Mode NAT Setup-New scenario for HCS

CSR 11.5 Device support

MSP mode-Access only to reports

Support upgrade from Cisco Prime Collaboration Assurance 10.xand 11.0 to 11.5

RTMT Parity and phone data collection Enhancement



Menu changesCisco Prime Collaboration Analytics

CSR 11.5 Device Support

Engineering Enhancements

Analytics for HCS Requirements

Prime Collab Analytics for BE

Improve Dashboard, Dashlet and ETL process Performance

Voice Conference and Capacity Analysis Enhancements

Service Experience Enhancement

Busy hour Trunk/RG call volume

Jabber Analytics

Before You Begin

Cisco Jabber for Mac

It is noticed that sometime text editor can cause problem while editing jabberLocalConfig.xml file. Somake sure to use TextWrangler or Xcode when editing this file.

Note





C H A P T E R 3Test Results Summary

• Cisco Unified Communications Manager, page 29

• Cisco Unity Connection, page 35

• Cisco Unified Communications Manager IM & Presence Service, page 38

• Cisco IP Phone, page 40

• Cisco Jabber for iPhone and iPad, page 45

• Cisco Jabber for Android, page 52

• Cisco Jabber for Windows, page 65

• Cisco Jabber for Mac, page 72

• Cisco Spark, page 79

• Cisco Jabber Guest, page 83

• Cisco TelePresence Video Communication Server, page 89

• Cisco TelePresence Multipoint Control Unit, page 130

• Cisco TelePresence Management Suite, page 138

• Cisco TelePresence Conductor, page 145

• Cisco TelePresence Server, page 155

• Cisco TelePresence Content Server, page 167

• Cisco Prime Collaboration, page 175

• Related Documentation, page 259

Cisco Unified Communications ManagerDefectsStatusCall Component

FlowDescriptionTitleLogical ID


PassedNAVerify that display namesection should be blankif there is no previouslysaved display name indatabase in generalsettings page in CiscoUnifiedCommunicationsSelf Care Portal

Display namesection shouldbe blank inself care portal

UCJ11.5S.CUCM.G.001

PassedNAVerify user ID on the topright corner of thegeneral settings pageafter successful login inCisco UnifiedCommunications SelfCare Portal

Display ofuser ID in selfcare portal

UCJ11.5S.CUCM.G.002

PassedNAVerify the IM andAvailability of self careportal after successfullogin in Cisco UnifiedCommunications SelfCare Portal

IM andAvailability ofself care portalaftersuccessfullogin

UCJ11.5S.CUCM.G.003

PassedNAVerify my additionalPhones functionality ofself care portal aftersuccessful login to CiscoUnifiedCommunicationsSelf Care Portal

AdditionalPhonefunctionalityin self careportal

UCJ11.5S.CUCM.G.005

PassedNAVerify the ring settingsfunctionality of self careportal after successfullogin to Cisco UnifiedCommunications SelfCare Portal

Ring settingsfunctionalityof Self CarePortal aftersuccessfullogin

UCJ11.5S.CUCM.G.006

PassedNAVerify the voice mailnotificationsfunctionality of self careportal after successfullogin to Cisco UnifiedCommunications SelfCare Portal

Voice MailNotificationsfunctionalityof self careportal aftersuccessfullogin

UCJ11.5S.CUCM.G.007

PassedNAVerify call forwardingfunctionality of self careportal after successfullogin to Cisco UnifiedCommunications SelfCare Portal

CallForwardingfunctionalityof self careportal aftersuccessfullogin

UCJ11.5S.CUCM.G.008


Test Results SummaryCisco Unified Communications Manager

PassedNAVerify whether theLDAP search is enabledor not under LDAPsearch for enterpriseusers through UDS inCisco UnifiedCommunicationsManager using single UI

LDAP searchin Unified CM

UCJ11.5S.CUCM.G.009

PassedNAVerify the LDAP searchpasswords match in boththe fields (LDAPpassword and confirmpassword) should matchin Cisco UnifiedCommunicationmanagerusing single UI

LDAP searchpassword inUnified CM

UCJ11.5S.CUCM.G.010

PassedNAVerify whether the viewdetails link navigates toUC service profile pageadded in Cisco UnifiedCommunicationsManager using single UI

View detailslink in LDAPSearch

UCJ11.5S.CUCM.G.011

PassedNAVerify display namesection in generalsettings of self careportal after successfullogin for LDAP synceduser

Display namesection ingeneralsettings of selfcare portal

UCJ11.5S.CUCM.G.012

PassedNAVerify enable user searchcheck box is unchecked,the admin is not allowedto configure anything onthe Cisco Unified OSAdministration page

Enable usersearch checkbox isunchecked inLDAP Search

UCJ11.5S.CUCM.G.013

PassedNAVerify the create tar filename and selectedparticular importfunctionality

Tar file forimport of bulkadministrationin Unified CM

UCJ11.5S.CUCM.G.014

PassedNAVerify the create tar filename and selectedparticular importfunctionality withoverride

Tar file forimport withoverride ofbulkadministrationin Unified CM

UCJ11.5S.CUCM.G.015



PassedNAVerify phone contactsfunctionality of self careportal after successfullogin to Cisco UnifiedCommunications SelfCare Portal

Phone contactsfunctionalityof self careportal aftersuccessfullogin

UCJ11.5S.CUCM.G.016

PassedNAVerify downloadsfunctionality of self careportal after successfullogin to Cisco UnifiedCommunications SelfCare Portal

Downloadsfunctionalityof self careportal aftersuccessfullogin

UCJ11.5S.CUCM.G.017

PassedNAVerify self careenterprise parameterfunctionality of self careportal after successfullogin to Cisco UnifiedCommunications SelfCare Portal

Self-careenterpriseparameterfunctionalityof self careportal aftersuccessfullogin

UCJ11.5S.CUCM.G.018

PassedNAVerify filter-byfunctionality for speeddial of self care portalafter successful login toCisco UnifiedCommunications SelfCare Portal

Filter-byfunctionalityfor speed dialof self careportal aftersuccessfullogin

UCJ11.5S.CUCM.G.019

PassedNAVerify filter-byfunctionality of voicemail notifications ofCisco UnifiedCommunications SelfCare Portal aftersuccessful login

Filter-byfunctionalityof voice mailnotificationsof self careportal aftersuccessfullogin

UCJ11.5S.CUCM.G.020

PassedNAVerify filter-byfunctionality for "AllPhones" and phonecontacts of CiscoUnifiedCommunications SelfCare Portal aftersuccessful login

Filter-byfunctionalityfor "AllPhones" andphone contactsof self careportal aftersuccessfullogin

UCJ11.5S.CUCM.G.021



PassedNAVerify loginfunctionality of self careportal check if thebanner message isdisplayed in self carelogin page when useruploads a banner inCisco UnifiedCommunications SelfCare Portal

Loginfunctionalityof self careportal whenuser uploadsthe customlogin messagein admin page

UCJ11.5S.CUCM.G.022

PassedNAVerify the add UCservice button takes toUC service page withproduct type by defaultselected as directory

Add UCservice buttonin Unified CM

UCJ11.5S.CUCM.G.023

PassedNAVerify whether devicelocation tracking serviceoption is displayed in themain menu in CiscoUnifiedCommunicationsManager successfully

Display devicelocationtrackingservices optionin main menu

UCJ11.5PH2S.CUCM.G.001

PassedNAVerify whether devicelocation tracking serviceoption is displayed in themain menu and able toselect wireless accesspoint controller option inCisco UnifiedCommunicationsManager successfully

Selectingwirelessaccess pointcontrolleroption inadvancedfeatures


PassedNAVerify whether theSNMP settings arechecked when thecontrollers are added inswitches and accesspoint controller page inCisco CommunicationsManager and also checkfor the statussuccessfully

Testing SNMPsettings whenaddingcontroller inwirelessaccess pointcontroller


PassedNAVerify whether pop upmessage is displayed ifwe click the sync iconafter adding thecontroller detailssuccessfully in CiscoUnifiedCommunicationsManager

Sync initiatedpopup afteradding thecontroller




PassedNAVerify whether errornotification is displayedwhen the existingcontroller name is addedagain in Cisco UnifiedCommunicationsManager

Errornotificationwith samecontrollername inUnified CM


PassedNAVerify whether theindividual controller isable to cancelsynchronize and checkfor the error notificationis displayed in CiscoUnifiedCommunicationsManager

Cancelsynchronizefor individualcontroller inUnified CM


PassedNAVerify whether the popup message is displayedwhen the controller isdeleted in CiscoCommunicationsManager successfully

Popupmessage whenthe controlleris deleted


PassedNAVerify whether the statusof AP remainsunchanged afterrestarting the service inCisco CommunicationsManager successfully

Restart theservice andverify thestatus of AP


PassedNAVerify whether last syncsuccess string displayedin wireless access pointcontroller configurationpage after thesynchronization isinitiated successfully inCisco UnifiedCommunicationsManager

Last syncsuccess aftersynchronizationof controller inUnified CM


PassedNAVerify whether switchesand access point pagedisplays all the addedaccess points recordssuccessfully in CiscoUnifiedCommunicationsManager successfully

Display accesspoints recordsin switchesand accesspoint page inUnified CM

UCJ11.5PH2S.CJA.G.010



PassedNAVerify whether switchesand access point pagedisplays all the InactiveAP details successfullyin Cisco UnifiedCommunicationsManager successfully

DisplayInactive APdetails inaccess pointsrecords inswitches andaccess pointpage inUnified CM


PassedNAVerify whether theassociated endpoints willbe displayed in accesspoint page of switchesand access point in CiscoUnifiedCommunicationsManager successfully

Findingassociatedendpoints inswitches andaccess points


PassedNAVerify whether therebroadcast externalmulticast source optionis able to enablesuccessfully in CiscoUnifiedCommunicationsManager successfully

EnableRebroadcastexternalmulticastsource inUnified CM


PassedNAVerify whether newMOH audio source isable to add in music onhold configuration pagemulticast source optionsuccessfully in CiscoUnifiedCommunicationsManager successfully

Adding MOHaudio sourcein music onholdconfigurationpage


PassedNAVerify whether thedevices are sorted byusing the BSSID inswitches and accesspoint in Cisco UnifiedCommunicationsManager successfully

Able to finddevices byusing BSSID


Cisco Unity ConnectionDefectsStatusCall Component FlowDescriptionTitleLogical ID


Test Results SummaryCisco Unity Connection

PassedIP Phone A -> Unified CM ->IP Phone B -> UnityConnection

Verify commonPIN is workingsuccessfully forCisco UnityConnection userwhen callforward all isenabled tovoicemail in78xx

Common PINfor UnityConnectionusers whenCFA tovoicemail in78xx

UCJ11.5S.CUC.G.022

PassedIP Phone A -> Unified CM ->IP Phone BIP Phone C -> Unified CM ->IP Phone B -> UnityConnection

Verify commonPIN is workingsuccessfully forCisco UnityConnection userwhen callforward busy isenabled tovoicemail in78xx

Common PINfor UnityConnectionusers whenCFB tovoicemail in78xx

UCJ11.5S.CUC.G.023


Verify commonPIN is workingsuccessfully forCisco UnityConnection userwhen callforward noanswer isenabled tovoicemail in99xx

Common PINfor UnityConnectionusers whenCFNA tovoicemail in99xx

UCJ11.5S.CUC.G.027

PassedCJW 2 -> Unified CM ->CJW 1 -> Unity Connection

Verify commonPIN UnityConnection isworkingsuccessfully forCisco Jabber forWindows whencall forward allis enabled tovoice mail

Common PINUnityConnectionfor CJWwhencall forwardall to voicemail

UCJ11.5S.CUC.G.028



PassedEnd User1 -> Web Inbox ->End User2 (IP Phone A)

Verify voicemails aredeletedsuccessfullyusing thecommon PIN inCisco IP Phone8961 when enduser isconfigured withextensionmobility feature

Delete thevoice mailsusingcommon PINwhen userlogin withextensionmobilityfeature

UCJ11.5S.CUC.G.030


Verify whetherCisco IP Phone88xx user is ableto retrieve thevoice mailsusing thecommon PINwhich is sentfromWeb Inboxtool

Retrieve voicemails in 88xxusingcommon PINwhich is sentfrom WebInbox ofUnityConnection

UCJ11.5S.CUC.G.033

PassedEnd User1 -> Web Inbox ->End User2 (CJM)

Verify whetherCisco Jabber forMac user is ableto retrieve thesecure voicemailssuccessfullyusing commonPIN which issent from WebInbox tool

Send securevoice mailsfrom WebInbox tool andretrieve thesame usingcommon PINin CJM

UCJ11.5S.CUC.G.038


Verify whetherthe end user PINis updated inCiscoUnified IPPhone 9971after changingthe commonPIN throughWeb Inbox ofCisco UnityConnection

Change theend user'scommon PINin Web Inboxof UnityConnection

UCJ11.5S.CUC.G.035




Verify whetherthe commonPIN is workingsuccessfullywhile retrievingvoicemails forshared lines

Common PINfor voicemailwhen IPPhones are inshared line

UCJ11.5S.CUC.G.041

PassedIP Phone A -> Unified CM ->CJW -> Unity Connection

Verify whethervoice mail issendingsuccessfullyfrom CiscoUnified IPPhone 9971 toCisco Jabber forWindows andretrieved usingcommon PIN

Send voicemail from9971 to CJWand retrieveusingcommon PIN

UCJ11.5S.CUC.G.043

Cisco Unified Communications Manager IM & Presence ServiceDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedNAVerify whether theSelf-signedcertificate fortomcat-ECDSA isgenerated in CiscoUnified IM &Presence

GenerateSelf-signedcertificate fortomcat-ECDSAin CertificateManagementof Cisco IM &P

UCJ11.5S.IM&P.G.001

PassedNAVerify whether theGenerateCertificate SigningRequest fortomcat-ECDSA isgenerated in CiscoUnified IM &Presence

Generate CSRfortomcat-ECDSAin CertificateManagementof Cisco IM &P

UCJ11.5S.IM&P.G.002


Test Results SummaryCisco Unified Communications Manager IM & Presence Service

PassedNAVerify whether theSelf-signedcertificate for cup- xmpp - s2s -ECDSACUP-XMPP isgenerated in CiscoUnified IM &Presence

GenerateSelf-signedcertificate forCUP-XMPP inCertificateManagementof Cisco IM &P

UCJ11.5S.IM&P.G.003

PassedNAVerify whether theGenerateCertificate SigningRequest forCUP-XMPP isgenerated in CiscoUnified IM &Presence

GenerateCertificateSigningRequest forCUP-XMPP inCertificateManagementof Cisco IM &P

UCJ11.5S.IM&P.G.004

PassedNAVerify when theKey Length valueis 256, then theHash Algorithmvalue will be autopopulated toSHA256 from thedrop down listSelf-signedcertificate for cup- xmpp - s2s -ECDSAsuccessfully

Auto populateto SHA256from the dropdown list ofSelf-signedcertificate forcup - xmpp -s2s - ECDSA

UCJ11.5S.IM&P.G.006

PassedNAVerify whether theSelf-signedcertificate for cup- xmpp - s2s -ECDSA isgenerated in CiscoUnified IM &Presence

GenerateSelf-signedcertificate forcup - xmpp -s2s - ECDSAin CertificateManagementof Cisco IM &P

UCJ11.5S.IM&P.G.008


Test Results SummaryCisco Unified Communications Manager IM & Presence Service

PassedNAVerify whether theSelf-signedcertificate forCUP-ExtensibleMessaging andPresenceProtocol-s2s isgenerated in CiscoUnified IM &Presence

GenerateSelf-signedcertificate forcup - xmpp -s2s - ECDSAin CertificateManagementof Cisco IM &P

UCJ11.5S.IM&P.G.009

PassedNAVerify whether theSelf-signedcertificate for cup- xmpp - s2s -ECDSA is able todelete in CiscoUnified IM &Presence

DeleteSelf-signedcertificate forcup - xmpp -s2s - ECDSAin CertificateManagementof Cisco IM &P

UCJ11.5S.IM&P.G.010

PassedNAVerify themaximumenterprise groupsize can be able toset to 200 and popup is displayed inCisco Unified IM& Presence

Set Maximumenterprisegroup size as200 and checkfor the pop upmessage

UCJ11.5S.IM&P.G.011

PassedNAVerify whether themaximumenterprise groupsize can be able toset to 0 and thepop up isdisplayed in CiscoUnified IM &Presence

Set theMaximumenterprisegroup size as 0and check forthe pop upmessage

UCJ11.5S.IM&P.G.012

Cisco IP PhoneDefectsStatusCall Component



Test Results SummaryCisco IP Phone

PassedNAVerify whether thelong line label isdisplay successfullyin Cisco IP Phone88xx using JPcharacters

Assign longline label to88xx using JPcharacters

UCJ11.5S.IPPhone.G.401

PassedNAVerify whether theassigned long linelabel "2055 - INDIA- TAMILNADU -CHENNAI" isdisplayed successfullyin Cisco IP Phone88xx

Assign longline label asnumber andcapitalalphabets in88xx


PassedNAVerify whether theCisco IP Phone 88xxenable DND usingsoftkey andmake surethe call is notconnectingsuccessfully

Enable DND in88xx usingsoftkey andplace a call


PassedIP Phone A ->Unified CM -> IPPhone B

Verify whether theCisco IP Phone 88xxdisable DND usingsoftkey andmake surethe call getsconnectedsuccessfully

Disable DNDin 88xx usingsoftkey andplace a call


PassedNAVerify whether theCisco IP Phone 88xxenable DND usingsoftkey and it isshowing DND iconon header bar

Enable DND in88xx usingsoftkey to showthe DND iconon header bar


PassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C

Verify whether CiscoIP Phones 88xx ableto barge the callsuccessfullywhen callmade from Cisco IPPhone A to Cisco IPPhone B which is inshared-linewith CiscoIP Phone 88xx

Call Bargefrom 88xxwhen it is onshared line




PassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C->Unified CM -> IPPhone D

Verify whether CiscoIP Phone 88xx makea conference call byusing barge softkeyand able tocompletely transferthe call to Cisco IPPhone D successfully

Call Transferby 88xx whenit is on activeconference callusing barge


PassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C->Unified CM -> IPPhone D

Verify whether CiscoIP Phone 88xx makea conference call byusing barge softkeyand able to park theactive call andretrieved by Cisco IPPhone D successfully

Call Park by88xx when it ison activeconference callusing barge



Verify whether thenew font and font sizealert name isdisplayed successfullywhen place a call inCisco IP Phone 88xx

New font andfont sizealerting namein 88xx whenplace a call


PassedNAVerify whether thechanged new font andfont size of small isdisplayed successfullyin Cisco IP Phone88xx

Change newfont and fontsize as small in88xx


PassedNAVerify whether theenlarge Cisco sans(light) font issuccessfully in CiscoIP Phone 88xx

Enlarge Ciscosans (light) fontin 88xx


PassedIP Phone A ->Unified CM -> IPPhone B -> UnityConnection

Verify whether theCisco IP Phone 88xxis not answer callingIP Phone send visualvoice mail call toCisco IP Phones 88xxsuccessfully

Make a call to88xx when it isnot answer itsend visualvoice mail


PassedIP Phone A ->Unified CM ->Unity Connection ->IP Phone B

Verify whether all thevisual voice mail callsare compose by nameis successfully inCisco IP Phone 88xx

Visual voicemail calls arecompose byname in 88xx




PassedIP Phone A ->Unified CM ->Unity Connection

Verify whether thevisual voice mail callplayback speed fasterworks successfully inCisco IP Phone 88xx

Visual voicemail callplayback speedis faster in 88xx



Verify whetherConference calldetails is displayedsuccessfully in CiscoIP Phone 8821

Conference calldetails in 8821

UCJ11.5PH2S.IPPhone.G.013


Verify whethertransfer details isdisplayed successfullyin Cisco IP Phone8821

Call Transferdetails in 8821


PassedNAVerify whether theJapanese characterslong line label isdisplayed successfullyin Cisco IP Phone8821

AssignJapanesecharacters forlong line labelin 8821


PassedNAVerify whether theDo Not Disturb statusis displayedsuccessfully in CiscoIP Phone 8821

DND status isON in 8821



Verify whether theMOH is worked inCisco IP Phone 8821successfully afterpressing transfer key

Listen MOHafter pressingTransfer key in8821


PassedNAVerify whetherCorporate Directorydisplayed Japanesecharacter in Cisco IPPhone 8821successfully

CorporateDirectorydisplayedJapanesecharacter inCisco IP Phone8821



Verify whether theMOH is workedsuccessfully in CiscoIP Phone 8821 whenit is in Shared Line

MOH in 8821when it is inShared Line




PassedIP Phone B ->Unified CM -> IPPhone A

Verify whether DoNot Disturb is workedsuccessfully in CiscoIP Phone 8821 whenRinger Off optionwith Flash only

DND in 8821when RingerOff option withFlash only



Verify whether Holdand Resume isworked successfullyin Cisco IP Phone8821 when it hasspecial character DNand Shared Line

Hold andResume in8821 when ithas specialcharacter DNand SharedLine


PassedIP Phone A ->Unified CM -> IPPhone BIP Phone A ->Unified CM -> IPPhone C

IP Phone A ->Unified CM -> IPPhone D

Verify whether Holdand Resume isworked successfullyin Cisco IP Phone8821 when New Callis initiated afterholding two activecall

Hold andResume in8821 when it isin two NewCall


PassedIP Phone A ->Unified CM -> IPPhone BIP Phone A ->Unified CM -> IPPhone C

Verify whether Holdand Resume isworked in Cisco IPPhone 8821 for longduration when NewCall successfully

Hold andResume in8821 for longduration whenNew Call



Verify whether Holdand Resume isworked successfullyin Cisco IP Phone8821 after Conferencethe call to Cisco IPPhone 88xx

Hold andResume in8821 incompleted callConference


PassedIP Phone C ->Unified CM -> IPPhone A -> UnifiedCM -> IP Phone B

Verify whether Holdin Cisco IP Phone8821 and Resume thecall in Cisco IP Phone8841 when it is inShared Linesuccessfully

Hold in 8821and Resume thecall in 8841when it is inShared Line



Verify whether HoldReversion in Cisco IPPhone 8821successfully

Hold Reversionin 8821





Verify whether CiscoIP Phone 8821 is ableto forward a call toCisco IP Phone Bsuccessfully

CFA in CiscoIP Phone 8821to Cisco IPPhone


PassedIP Phone A ->Unified CM -> IPPhone C

Verify whether CallForward No Answeris worked in Cisco IPPhone 8821successfully

CFNA in CiscoIP Phone 8821to Cisco IPPhone D


PassedNAVerify whether CiscoIP Phone 8821 is ableto access the PersonalDirectory successfully

PersonalDirectoryaccessibility inCisco IP Phone8821


PassedNAVerify whether CiscoIP Phone 8821 is ableto access theCorporate Directorysuccessfully

CorporateDirectoryaccessibility inCisco IP Phone8821


CSCuz14699FailedNAVerify whether"Feature isunavailable" is notdisplayed in Cisco IPPhone 8945(SCCP)when unregisteredstatus

Feature isunavailablemessage is notdisplayed


CSCuz82110FailedNAVerify whether PhoneURL Page displayNetwork locale for IPPhone successfully

Network localein 8821


CSCuz85661FailedIP Phone B ->Unified CM -> IPPhone A

Verify whether alertname and display Idis displayedsuccessfully in CiscoIP Phone 8821

Alert name andDisplay ID in8821


Cisco Jabber for iPhone and iPadDefectsStatusCall Component FlowDescriptionTitleLogical ID


Test Results SummaryCisco Jabber for iPhone and iPad

PassedNADisable a parameter asFalse injabber-config.xml file,press continue in thewarning message as"Rooted devicedetected" in CJI

Disableparameter forJailbreak injabber-config.xmlfile and accepta warningmessage in CJI

UCJ11.5S.CJI.G.010

PassedNAEnable a Parameter forJailbreak quit thesigned Jabber andlogin again in CJIverify its shows samewarning message

Enable aParameter forJailbreak quitthe signedJabber andlogin again inCJI

UCJ11.5S.CJI.G.011

PassedNAVerify whether thealerting tone triggervia speaker while themessage delivered inthe Cisco Jabber foriPhone

Alerting tonevia speakerwhile messagedelivered in CJI

UCJ11.5S.CJI.G.028

PassedNAVerify whether CiscoJabber for iPhone isable to start meetingwhile in the group chatsuccessfully

Initialize ameeting whileon a group chatfrom CJI

UCJ11.5S.CJI.G.021

PassedNAVerify whether thereceived messages ofCisco Jabber foriPhone are shown inother Jabber Clients(CJW,CJM)successfully

Receive chatmessages inMultiple JabberClients

UCJ11.5PH2S.CJI.G.202

PassedNAVerify whether thedate of sent messagesare shown in multipledevices while sendingchat messages fromCisco Jabber foriPhone

Sent messagedate in CJI




PassedNAVerify whether thereceived message datein Cisco Jabber foriPhone 2 is matchedwith multiple Jabberclients (CJW,CJM)while sending chatmessages from CiscoJabber for iPhone 1

Receivedmessage date inMultiple JabberClients


PassedNAVerify whether thenotifications are notdisplayed in multipleJabber clients (CJW,CJM,CJI2) after CiscoJabber for iPhone 2receives chatmessagesfrom Cisco Jabber foriPhone 1

Message statusin multipleJabber Clientsafter retrievingthe chatmessages in CJI


PassedNAVerify whether thechat message isreceived in CiscoJabber for Windows,Cisco Jabber for Mac,and Cisco Jabber foriPhone 2 successfullyand sent replymessagefrom Cisco Jabber forWindows whileretrieving chatmessage from CiscoJabber for iPhone 1

Retrieve chatmessages inmultipledevices(CJI,CJW,CJM)and reply fromCJW


PassedNAVerify whether thelogin status of CiscoJabber is shown inApple watch when itis paired with CiscoJabber for iPhone

Jabber loginstatus in Applewatch


PassedNAVerify whether thechat messagenotifications aredisplayed successfullyin Apple watch whilesending chat messagefrom Cisco Jabber forWindows

Chat messagenotifications inApple watch




PassedCJW -> Unified CM ->CJI

Verify whether themissed callnotifications aredisplayed successfullyin Apple watch whilecalling from CiscoJabber forWindows toCisco Jabber foriPhone

Missed callnotifications inApple watch


PassedNAVerify whether theavailability status isdisplayed correctly inApple watch afterpairing the AppleWatch with iPhone

End useravailabilitystatus in Applewatch



Verify whether the callreceive and decline isworked fine in Applewatch while makingcall from Cisco Jabberfor windows to CiscoJabber for iPhone

Receive andDecline the callin Apple watch


PassedNAVerify whether theCisco Jabber isinstalled and signed iniPhone with IOSversion 9.0successfully

Install andlogin Jabber iniPhone withversion 9.0


PassedNAVerify whether thealert when available isworked fine in CiscoJabber for Desktop(CJW,CJM) whenCisco Jabber foriPhone user becomesavailable

Alert whenavailable inCisco Jabberdesktop deviceswhen loginwith CJI user


PassedNAVerify whether theInstant Messaging isworked fine in CiscoJabber for Desktop(CJW,CJM) afterchanging presencestatus to gray scale inCisco Jabber foriPhone

Gray scalestatus in Jabberdesktop deviceswhen loginwith CJI user




PassedNAVerify whether theJapanese characters(ひらがな,カタカナ,会意) are displayedcorrectly in CiscoJabber for iPhonewhile adding groupsfor contacts

Use Japanesecharacters (ひらがな,カタカナ,会意)while addinggroup ofcontacts in CJI


PassedNAVerify whether thespecial characters(!@#$%^&*) aredisplayed correctly inCisco Jabber foriPhone while addingcustom status andcontacts group

Use specialcharacters(!@#$%^&*)in custom statusand contactsgroup in CJI


PassedNAVerify Cisco Jabberfor iPhone 6s can ableto view chatnotification on 3Dtouch successfully

Chatnotifications on3D touch in CJI


PassedNAVerify whether theCisco Jabber for Applewatch paired withCisco Jabber foriPhone getting anincoming messagenotification from CJAin glances screensuccessfully

MessageNotification inglances screenof Apple watch



Verify whether theCisco Jabber for Applewatch display theHoldstatus successfully

Hold status inApple watch


PassedNAVerify whether CiscoJabber for iPhone 6scan sign in CiscoJabber via 3D touchsuccessfully

Sign in CJI userby 3D touch


PassedCJI -> Unified CM ->CJA

Sign in Cisco Jabberfor iPhone 6s via 3Dtouch and verify CiscoJabber for iPhone 6scan initiate a call toother Jabber clientssuccessfully

Sign in Jabbervia 3D touch inCJI and make acall to otherJabber Clients




PassedNAVerify Cisco Jabberfor iPhone 6s can senda chat to CJIPad via3D touch successfully

Start chatsession withCJIPad in CJIusing 3D touch


PassedNAVerify Cisco Jabberfor iPhone 6s candisplay the recents via3D touch successfully

Display ofrecents in CJIvia 3D touch


PassedNAVerify Cisco Jabberfor iPhone 6s can set apreview chat bycustomizing amessageusing 3D touchsuccessfully

Set a previewchat bycustomize amessage using3D touch in CJI


PassedNAVerify Cisco Jabberfor iPhone 6s can senda default previewmessage 'Thank you!'by using 3D touchsuccessfully

Send a defaultpreview chat'Thank you!' byusing 3D touchin CJI


PassedNAVerify whether CiscoJabber for iPad is ableto send broadcastmessage to alreadycreated group from itscontact listsuccessfully

SendingBroadcastmessage fromCJIPad togroup from itscontact

UCJ11.5S.CJIPad.G.001

PassedCJIPad1 -> UnifiedCM -> CJIPad2

Verify whether CiscoJabber for iPad is ableto send broadcastmessage during a call

Send broadcastmessage fromCJIPad1 toCJW during acall withCJIPad2


PassedNAVerify whether CiscoJabber for iPad is ableto access in the rooteddevice

Login Jabber inthe CJIPadwhere therooted featureenable


PassedNAEnable a parameter asTrue injabber-config.xml file,press a quit button inthe warning messageverify the CJIPad quitsuccessfully

Enableparameter forJailbreak injabber-config.xmlfile and Ignorea warningmessage inCJIPad




PassedNADisable a parameter asFalse injabber-config.xml file,check the warningmessage as "Rooteddevice detected" inCJIPad

Disableparameter forJailbreak injabber-config.xmlfile


PassedNAVerify whether CiscoJabber for iPad is ableto send a meetinginvite to Cisco Jabberfor Windows

Send a meetingInvite to CJWfrom CJIPad


PassedNAVerify the CiscoJabber for iPad add anew participant in thecreated chat sessionwith Cisco Jabber forWindows in thecontact menusuccessfully

Adding aparticipant increated chatsession

UCJ11.5PH2S.CJIPad.G.479

PassedNAVerify the CiscoJabber for iPad initiatea chat session fromcontact menu withCisco Jabber forWindows successfully

Initiate a chatsession bytapping a userpresent in thecontact ofCJIPad


PassedCJI1 -> Unified CM ->CJIPad Pro -> UnifiedCM -> CJI2

Verify whether theCisco Jabber for iPadPro can transfer call toCisco Jabber foriPhone successfully

Call Transferfrom CJIPadPro to CJI


PassedNAVerify whether theCisco Jabber iPad Procan initiated groupchat with Cisco Jabberfor Android and CiscoJabber for iPhonesuccessfully

Initiate GroupChat fromCJIPad Pro


PassedMX100 ->UnifiedCM-> CJIPad

Verify whether CiscoJabber for iPad Progetting an incomingcall from video endpoint successfully

Initiate a callfrom video endpoints toCJIPad Pro




PassedNAVerify the CiscoJabber can sign insuccessfully in iPadwhen iOS 9 installed

Login Jabber iniPad with iOS 9installed


PassedNAVerify the Phoneservice working inCisco Jabber for iPadduring iOS 9 isinstalled

Phone Servicestatus in CJIPadwhen iOS 9 isinstalled


PassedCJM -> Unified CM ->CJIPad

Verify the CiscoJabber for iPad canreceive incoming callfrom Cisco Jabber forMac during iOS 9installed

Make a callfrom CJM toCJIPad wheniOS 9 isinstalled


PassedNAVerify whether theJapanese characters(Hiragana, Katakana,Kanji) are displayedcorrectly in CiscoJabber for iPad whilecreating user ID withfirst name and lastname

Use Japanesecharacters(Hiragana,Katakana,Kanji) in firstand last namewhile creatinguser ID forCJIPad


Cisco Jabber for AndroidDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedNAVerify whetherCisco Jabber forAndroid is able tosend broadcastmessage toalready createdgroup from itscontact listsuccessfully

SendBroadcastmessage fromCJA to groupfrom itscontact

UCJ11.5S.CJA.G.001


Test Results SummaryCisco Jabber for Android

PassedNAVerify whetherCisco Jabber forAndroid is able tosend broadcastmessage to CiscoJabber forWindows andCisco Jabber forMac from itscontact listsuccessfully

Sendbroadcastmessage fromCJA toselected userfrom thecontact list

UCJ11.5S.CJA.G.005

PassedNAVerify whetherCisco Jabber forAndroid is able toaccess in theRooted device

Login CJA inrooted device

UCJ11.5S.CJA.G.016

PassedNAEnable aparameter as Trueinjabber-config.xmlfile, press a quitbutton in thewarning messageverify the CiscoJabber forAndroid quitsuccessfully

Enableparameter forJailbreak injabber-config.xmlfile and Ignorea warningmessage inCJA.

UCJ11.5S.CJA.G.017

PassedNADisable aparameter asFalse injabber-config.xmlfile, press quit inthe warningmessage as"Rooted devicedetected" in CiscoJabber forAndroid

Disableparameter forJailbreak injabber-config.xmlfile and Ignorea warningmessage inCJA

UCJ11.5S.CJA.G.019



PassedNADisable aparameter asFalse injabber-config.xmlfile, presscontinue in thewarning messageas "Rooted devicedetected" in CiscoJabber forAndroid

Disableparameter forJailbreak injabber-config.xmlfile and accepta warningmessage inCJA

UCJ11.5S.CJA.G.020

PassedCJW -> Unified CM ->CJA

Verify whetherCisco Jabber forAndroid is able toattend a call andcommunicate viaspeaker

Attend aincoming callin CJA viaSpeaker

UCJ11.5S.CJA.G.006

PassedNAVerify whetherCisco Jabber forAndroid is able toenable a Nativeringtone

Enabling theNativeringtone inCJA

UCJ11.5S.CJA.G.031

PassedNAVerify whetherCisco Jabber forAndroid is able toset a Ciscoringtone and get acall alert

Enabling theCisco ringtonein CJA

UCJ11.5S.CJA.G.032

PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1 isable to reply amessage to CiscoJabber forAndroid2successfully

Reply fromandroid wear




PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays theemoticonsreceived fromCisco Jabber forAndroid2 duringP2P chatsuccessfully

Displayemoticons inandroid wear


PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the errormessage whenCisco Jabber forAndroid1 logoutof Jabber

Logout in CJAand displayserror messagein androidwear


PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays thenumber of unreadmessagesreceived fromCisco Jabber forAndroid2 duringP2P chat

Displayunreadmessages inandroid wear


PassedCJA2 ->Unified CM ->CJA1

Verify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays themissed callnotificationreceived fromCisco Jabber forAndroid2

Displaymissed callnotification inandroid wearfrom CJA




PassedCJW -> Unified CM ->CJA1

Verify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays themissed callnotificationreceived fromCisco Jabber forWindows duringP2P chat withCisco Jabber forAndroid2

Displaymissed callnotification inandroid wearduring P2Pchat


PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the deleteconversation iconsuccessfully

Deleteconversationin androidwear


PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays therecents iconsuccessfully

Displayrecents icon inandroid wear



Verify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the callon hold statuswhen CiscoJabber forAndroid2 holdsthe call of CiscoJabber forAndroid1

Display callon hold statusin androidwear





Verify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the callresumed statuswhen CiscoJabber forAndroid2 resumesthe call of CiscoJabber forAndroid1

Display callresumed statusin androidwear



Verify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the errornotification whenthe call is failed inCisco Jabber forAndroid1 due tochange in network

Display errormessage inandroid wearwhen callfailed


PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the groupchat invite fromCisco Jabber forMac successfully

Group chatinvitenotificationdisplay inandroid wear


PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the filesent notificationwhen it sendsJPEG file toCisco Jabber forAndroid2 duringP2P chatsuccessfully

File sentnotification inandroid wearduring P2Pchat




PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1 isable to reply forgroup chatmessagesuccessfully

Reply forgroup chatmessage inandroid watch



Verify whetherCisco Jabber forAndroid1 is ableto make a callwith Cisco Jabberfor Android2 byclicking itscontact from itscontact listsuccessfully

Make a callfrom thecontact list


PassedNAVerify whetherCisco Jabber forAndroid1 displaysthe targetnumbers of CiscoJabber forAndroid2 byclicking itscontact from thecontact listsuccessfully

Display targetnumbers list inthe contact list


PassedNAVerify whethermore emoticonscan be sent fromCisco Jabber forAndroid1 to CiscoJabber forAndroid2successfully

Send moreemoticonsfrom CJA1 toCJA2


PassedNAVerify whetherfile (Image-JPEG)can be transferredduring group chatfromCisco Jabberfor Android tomultiple Jabberclientssuccessfully

File transferduring groupchat fromCJAto multipledevices




PassedNAVerify whetherJapaneseDate/Time formatis showingproperly inmultiple Jabberclients during thegroup chatsuccessfully

JapaneseDate/TimeFormat duringgroup chat inmultipledevices


PassedNAVerify whethergroup chatnotification isshown andaccepted inmultiple Jabberclients whenCisco Jabber forAndroid1 initiatedthe Group chatsuccessfully

Group chatacceptnotification inMultipledevices


PassedNAVerify whetherCisco Jabber forAndroid1 is ableto record personalmeeting roomsuccessfully.

RecordPersonalmeeting roomfrom CJA


PassedNAVerify whetherCisco Jabber forAndroid1 is ableto lock personalmeeting roomsuccessfully.

Lock Personalmeeting roomfrom CJA


PassedNAVerify whetherCisco Jabber forAndroid1 is ableto leave personalmeeting roomsuccessfully.

LeavePersonalmeeting roomfrom CJA


PassedNAVerify whetherCisco Jabber forAndroid is able tosend crash logsthrough mailsuccessfully

Send problemreporting ascrash




PassedNAVerify whetherCisco Jabber forAndroid is able tocall and videologs through mailsuccessfully

Send problemreporting ascall and video


PassedNAVerify whetherthe Japanesecharacters (ひらがな,カタカナ,会意) aredisplayedcorrectly in CiscoJabber forAndroid whilecreating user IDwith first nameand last name

Use Japanesecharacters (ひらがな,カタカナ,会意) infirst and lastname whilecreating userID for CJA


PassedNAVerify whetherthe Japanese dateformat isdisplayedcorrectly in CiscoJabber forAndroid whileviewing the chathistory details

Display ofdate format(YYYY/MM/DD)in CJA whileviewing thechat historydetails


PassedNAVerify whetherthe files andscreen capturesare sentsuccessfully fromCisco Jabber forAndroid to otherJabber clients

File transferand screencaptures fromCJA



Verify whether"On a call" statusis showing inCisco Jabber forAndroid during anactive callbetween CiscoJabber forAndroid1 andCisco Jabber forAndroid2successfully

"On a call"presence statusduring anactive call




PassedNAVerify whetherfile (Image-JPEG)can be transferredduring group chatfromCisco Jabberfor Android toCisco Jabber forWindowssuccessfully

File transfer(Image-JPEG)during groupchat fromCJAto CJW


PassedNAVerify whetherfile (Video) canbe transferredduring group chatfromCisco Jabberfor Android toCisco Jabber forWindowssuccessfully

File transfer(Video) duringgroup chatfrom CJA toCJW


PassedNAVerify whetherScreenshot can betransferred duringgroup chat fromCisco Jabber forAndroid to CiscoJabber forWindowssuccessfully

TransferScreenshotfrom CJA toCJW


PassedNAVerify whetherbasic call can bemade from CiscoJabber forWindows to CiscoJabber forAndroid is notsuccessful whenCisco Jabber forAndroid presencestatus is in DoNot Disturb

Make a callfrom CJW toCJA whenCJA is inDND state


PassedNAVerify whetherError notificationis showing inCisco Jabber forAndroid when theopened file istransferringduringGroup chatsuccessfully

ErrorNotificationwhile FileTransferduring Groupchat




PassedNAVerify whetherCisco Jabber forAndroid transferthe file(Image-JPEG)during group chathas been declinedin Cisco Jabberfor Windowssuccessfully

Decline thefile transferduring groupchat


PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1 isable to reply amessage asemoticons withtext to CiscoJabber forAndroid2successfully

Reply amessage asemoticon withtext in androidwear


PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays moreemoticonsreceived fromCisco Jabber forAndroid2 duringP2P chatsuccessfully

Display moreemoticons inandroid wear



Verify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays themissed callDirectoryNumberreceived fromCisco Jabber forAndroid2

Displaysmissed callDN in androidwear





Verify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the callpark status whenCisco Jabber forAndroid1 parksthe call of CiscoJabber forAndroid2

Display callpark status inandroid wear


PassedNAVerify whetherblocked file (png)should not betransferred duringgroup chat fromCisco Jabber forAndroid to CiscoJabber forWindowssuccessfully

Block Filetransfer (png)during groupchat fromCJAto CJW


PassedNAVerify whethercustomizedpresence status(text withsymbols) of CiscoJabber forWindows will bereflecting in theCisco Jabber forAndroidsuccessfully

Customize thepresence statusin CJA


PassedCJA1 ->Unified CM ->CJA2 ->Unified CM ->CJW

Verify whetherCisco Jabber forAndroid transferscall to CiscoJabber forWindowssuccessfully

Call transferfrom CJA toCJW


PassedCJA1 ->Unified CM ->CJA2 ->Unified CM ->CJW

Verify whetherCisco Jabber forAndroid1 isretrive Park callwith Park numbersuccessfully

Retrive Parkcall in CJA





Verify whetherCisco Jabber forAndroid is able topark the callsuccessfully

Call Park inCJA



Verify whetherthe call hold andresume issuccessful inCisco Jabber forAndroid

Hold andresume thecall in CJA


PassedNAVerify whetherthe Cisco Jabberfor Androidphone service isin connected stateafter login toJabber viaCollaborationEdge successfully

Phone servicein connectedstate via CE

UCJ11.5PH2S.CJA.SR.001

PassedNAVerify whetherCisco Jabber forAndroid phoneservice connectedstatus whenJabber comesback from the idlestate viaCollaborationEdge

Phone serviceconnectedstatus whenJabber comesfrom idle statevia CE


PassedCJA1 -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJA2

Verify whetherCisco Jabber forAndroid1 is ableto make a call toCisco Jabber forAndroid2 viaCollaborationEdge when phoneservice inconnected state inboth clients

Make a callfrom CJAwhen phoneservice inconnectedstate via CE




PassedCJW -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJA

Verify whetherCisco Jabber forAndroid receivesan incoming callfromCisco Jabberfor Windowswhen it is in idlestate viaCollaborationEdge

Receiving anincoming callfrom CJWwhen CJA inidle state viaCE


PassedCJW -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJA

Verify whetherCisco Jabber forAndroid receivesthe incoming callfromCisco Jabberfor windows viaCollaborationEdge after 10minutes durationfrom login time ofCisco Jabber forAndroid

Incoming callin CJA fromCJW after 10minutesduration fromlogin time ofCJA via CE


CSCuz83408FailedNAVerify whetherduring group chatnotification isgetting fromCisco Jabber forWindows whenCisco Jabber forAndroid is"DND" stagesuccessfully ornot

During groupchatnotification isgetting fromCJW whenCJA "DND"stage


CSCuz85024FailedNAVerify whethercustomizing incustom user textis takingUnlimited words(text words)successfully ornot

Customizingin custom usertext is takingUnlimitedwords (textwords)


Cisco Jabber for WindowsDefectsStatusCall Component



Test Results SummaryCisco Jabber for Windows

PassedNAVerify whether CiscoJabber for Windows isable to send broadcastmessage to CiscoJabber for Android andCisco Jabber for Macfrom the contacts listsuccessfully

Sendingbroadcastmessage fromCJW to bothdesktop andmobile clients

UCJ11.5S.CJW.G.001

PassedNAVerify whether CiscoJabber for Windows isable to send broadcastmessage to groupcreated already in thecontacts successfully

Sendingbroadcastmessage fromCJW to thegroup from itscontacts

UCJ11.5S.CJW.G.002

PassedCJW1 -> Unified CM-> CJW2

Verify whether CiscoJabber for Windows1is able to sendbroadcast message toCisco Jabber forAndroid and CiscoJabber for Mac fromits contact list duringcall with Cisco Jabberfor Windows2successfully

Sendingbroadcastmessage fromCJW1 to CJMand CJA duringcall with CJW2

UCJ11.5S.CJW.G.003


Verify whether CiscoJabber for Windows1is able to sendbroadcast message tothe group createdalready in the contactsduring call with CiscoJabber for Windows2successfully

Sendingbroadcastmessage fromCJW1 to thegroup from itscontacts during acall with CJW2

UCJ11.5S.CJW.G.004


Verify whether CiscoJabber for Windows1is able to set thecustom ringtones fromthe "select ringtone"option from thesettings menu andcheck the customringtone is ringedwhen it gets theincoming call fromCisco Jabber forWindows2successfully

Customringtones forcalls in CJW

UCJ11.5S.CJW.G.019




Verify whether CiscoJabber for Windows1is able to enable the"mute Jabber soundswhen on a call" optionduring a call withCisco Jabber forWindows2successfully

Mute Jabbersound optionduring a call

UCJ11.5S.CJW.G.018

PassedNAVerify whether CiscoJabber for Windows1is able to set thecustom chat alert fromthe "chat messagesound" option undersettings menu andcheck the custom chatsound is heard when itgets the chat alert fromCisco Jabber forWindows2successfully

Custom soundfor chat messagein CJW

UCJ11.5S.CJW.G.021


Verify whether CiscoJabber for Windows1do not display theincoming call alertfrom Cisco Jabber forWindows2 when "donot show incoming callalerts when in Do notDisturb" option isenabled in CiscoJabber for Windows1successfully

Do not showincoming callalert in DNDmode

UCJ11.5S.CJW.G.022

PassedNAVerify whether CiscoJabber for Windows1is able to enable thechat room messagealert option and alsochecks the alert fromCisco Jabber forWindows2 is displayedin Cisco Jabber forWindows1successfully

Chat roommessage alert inCJW

UCJ11.5S.CJW.G.014



PassedNAVerify whether CiscoJabber for Windows isable to enable the chatroom message alertoption and also checkthe sound is heardwhen the chat roommessage is receivedfrom Cisco Jabber forMac and also the alertis displayed in CiscoJabber for Windowssuccessfully

Displaynotification withsound alert forchat roommessages

UCJ11.5S.CJW.G.016

PassedNAVerify whether sharescreen works in CiscoJabber for Windowssuccessfully

Share screen inCJW

UCJ11.5PH2S.CJW.G.005

PassedNAVerify whether CiscoJabber for Windows isable to sendscreenshots duringgroup chat successfully

SendScreenshotsduring groupchat in CJW


PassedNAVerify whethermeeting invitescheduled via outlookshows in Cisco Jabberfor Windowssuccessfully

Schedulemeetinginvitations viaoutlook


PassedNAVerify whether userpresence status is ableto reflect in MicrosoftOutlook successfullywhen the user statuschanged in CiscoJabber for Windows

Changedpresence statusin CJW shouldreflect inMicrosoftOutlook


PassedCJW A -> UnifiedCM -> CJW B

Verify whether CiscoJabber for Windows isable to initiate a callduringWebExmeetingsuccessfully

Initiate callbetween CJWduring WebExmeeting


PassedNAVerify whethermessage invite is sentvia SMS to CiscoJabber for WindowsduringWebExmeetingsuccessfully

Send invitemessage to CJWvia SMS duringWebEx Meeting




PassedNAVerify whethernotification message isable to get in CiscoJabber for Windows Aduring WebEx whenCisco Jabber forWindows B leaves themeeting

Notificationmessage shownin CJW A whenCJW B leavesWebEx meeting


PassedNAVerify whether huntgroup notification isshown once log out ofHunt Group in CiscoJabber for Windowssuccessfully

Hunt Grouplogoutnotification inCJW


PassedCJA -> Unified CM-> CJW

Verify whetherincoming call toast isdisplayed in CiscoJabber for Windowswhen Cisco Jabber forAndroid dails HuntPilot Numbersuccessfully

Incoming calltoast displayedin CJW whenCJA dail HuntPilot Number


PassedCJW A -> UnifiedCM1 -> CJW B ->Unified CM1 -> CJWC

Verify whether CiscoJabber for Windows isable to hold andresumewhen callmadeto hunt pilot numberusing Longest IdleDistributionAlgorithmsuccessfully

Hold andResume betweenCJW A, CJW B,CJW C in sameHunt-Group


PassedIP Phone A ->Unified CM -> CJW

Verify whether CiscoJabber for Windows inHunt Group withBroadcast algorithm isable to attend the callfrom any Cisco IPPhone using Hunt PilotNumber successfully

Add CJW inHunt GroupwithBroadcastalgorithm andmake a call toCJW from anyCisco IP Phoneusing Hunt PilotNumber


PassedIP Phone A ->Unified CM -> IPPhone B CJM ->Unified CM -> CJW

Verify whether the callis forwarded to CiscoJabber for Windowswhen devices in a HuntGroup are busysuccessfully

Call forward toCJW whendevices are inbusy state




PassedCJW A -> UnifiedCM -> CJW B ->Unified CM -> CJWC

Verify whether call isable to forward toCisco Jabber forWindows during groupchat successfully

Call forward toCJW duringgroup chat


PassedCJM -> Unified CM-> CJW -> UnifiedCM -> IP Phone C

Verify whether CiscoJabber for Windowsattends the incomingcall from Cisco Jabberfor Mac dials huntpilot number and ableto transfer the call toany Cisco IP Phonesuccessfully

Transfer call toany Cisco IPPhone whenCJW attends theincoming callfrom CJM &dials Hunt PilotNumber


PassedCJM -> Unified CM-> CJW

Verify whether the callis forwarded to CiscoJabber for Windowswhen no devices in theHunt group attends theincoming call fromCisco Jabber for Macusing hunt pilotnumber successfully

The call isforwarded toCJW when nodevices in theHunt Grouppicks the callfrom CJM


PassedIP Phone A ->Unified CM2 -> SIPTrunk -> UnifiedCM1 -> CJW

Verify whether CiscoIP Phone A fromUnified CM2 makes acall to hunt pilotnumber via SIP Trunkto Cisco Jabber forWindows present inthe hunt groupsuccessfully

Make a call fromCisco IP Phone78xx to HuntPilot number viaSIP Trunk


PassedCJW A -> UnifiedCM1 -> CJW B ->Unified CM1 -> ICTtrunk-> Unified CM2-> IP Phone A

Verify whether CiscoJabber for Windows Bpresent in hunt groupattends the call andinitiates conferencewith Cisco IP Phone78xx via ICT Trunksuccessfully

MakeConference callwith CJW andCisco IP Phone78xx via ICTtrunk


PassedIP phoneA ->UnifiedCM -> CJW B

Verify whether CiscoJabber for Windowsfrom Line Group 2attends the call fromany Cisco IP Phonewhen two Line groupsare mapped to singleHunt list

Two Line groupsmapped intosingle Hunt listand make a callfrom any CiscoIP Phone viaHunt PilotNumber




PassedNAVerify whether CiscoJabber for Windows isable to removeparticipants during agroup chat successfully

Remove aparticipantduring a groupchat in CJW


PassedNAVerify whether theJapanese characters(ひらがな,カタカナ,会意) are displayedcorrectly in CiscoJabber for Windows 1while chatting withCisco Jabber forWindows 2

Use Japanesecharacters (ひらがな,カタカナ,会意) whilechatting in CJW


PassedNAVerify whether theJapanese characters(ひらがな,カタカナ,会意) are displayedcorrectly in CiscoJabber for Windowswhile adding customcontacts

Use Japanesecharacters (ひらがな,カタカナ,会意) whileadding customcontacts in CJW


PassedNAVerify whether theJapanese characters(ひらがな,カタカナ,会意) are displayedcorrectly in CiscoJabber for Windowswhile adding customtabs

Use Japanesecharacters (ひらがな,カタカナ,会意) whileadding customtabs in CJW


PassedNAVerify whether theJapanese characters(ひらがな,カタカナ,会意) are displayedcorrectly in CiscoJabber for Windowswhile adding group forcontacts

Use Japanesecharacters (ひらがな,カタカナ,会意) whileadding group ofcontacts in CJW


PassedNAVerify whether theJapanese characters(ひらがな,カタカナ,会意) are displayedcorrectly in CiscoJabber for Windowswhile creating andediting chat rooms

Use Japanesecharacters (ひらがな,カタカナ,会意) whileadding chatrooms in CJW




PassedNAVerify whether thename format(lastname- firstname)is displaying correctlyfor Japanese userswhile creating user IDwith Japanesecharcters (ひらがな,カタカナ,会意)successfully

Display ofJapanesecharacters (ひらがな,カタカナ,会意) in first andlast name whilecreating user IDfor CJW


PassedNAVerify whether theJapanese date format isdisplayed correctly inCisco Jabber forWindows whileviewing the calendar inmeetings tab

Display of dateformat(YYYY/MM/DD)in CJW whileviewing thecalendar


Cisco Jabber for MacDefectsStatusCallComponent FlowDescriptionTitleLogical ID

PassedNAVerify whether CiscoJabber for Mac is able tosend broadcast messageto Cisco Jabber forAndroid andCisco Jabberfor Windows from itscontact list successfully

Sendingbroadcastmessage fromthe contact list

UCJ11.5S.CJM.G.001

PassedNAVerify whether CiscoJabber for Mac displays"call with edit" option inhub menu successfully

Call with Editin CJM

UCJ11.5S.CJM.G.006

PassedCJM ->Unified CM ->CJW

Verify whether CiscoJabber for Mac is able toedit the directory numberof Cisco Jabber forWindows from the recenthub menu and make acall successfully

CJM Edits thedirectorynumber ofCJW fromRecents tabusing "callwith edit"option

UCJ11.5S.CJM.G.007

PassedNAVerify whether a user canable to add custom tab inthe Hub menu in CiscoJabber for Macsuccessfully

User can addcustom tab inthe menu

UCJ11.5S.CJM.G.012


Test Results SummaryCisco Jabber for Mac

PassedNAVerify whether CiscoJabber for Mac1 user canable to create custom tabin the Hub menu duringP2P chat with CiscoJabber for Mac2successfully

Creatingcustom tab inthe Hub menuduring P2Pchat

UCJ11.5S.CJM.G.015

PassedCJM ->Unified CM ->CJW

Verify whether CiscoJabber for Mac is able toadd the new locationduring call with CiscoJabber for Windows byenabling the new locationdetection check boxsuccessfully

New Locationupdate in CJMduring call

UCJ11.5S.CJM.G.020

PassedNAVerify whether CiscoJabber for Mac is able todecline the new locationdetected popup when it isconnected with LANsuccessfully

Decline newlocation updatewhen CJMconnectedwithLAN

UCJ11.5S.CJM.G.023

PassedNAVerify whether CiscoJabber for Mac1 displaysthe "alert when available"message successfullywhen Cisco Jabber forAndroid comes online

Displays "alertwhenavailable"message whenmobile client isavailable

UCJ11.5S.CJM.G.025

PassedCJM1 -> Unified CM-> CJM2

Verify whether CiscoJabber for Mac1 displaysthe "alert when available"message successfullywhen Cisco Jabber forWindows comes online ,during a call with CiscoJabber for Mac2

Displays "alertwhenavailable"messageduring a call

UCJ11.5S.CJM.G.026

PassedNAVerify whether CiscoJabber for Mac1 displaysthe alert messagesuccessfully when CiscoJabber for Mac2, CiscoJabber for Android comesonline at same time

Displays alertmessage whentwo or moreusers becomeavailable atsame time

UCJ11.5S.CJM.G.029



PassedCJM2 -> Unified CM-> CJM1

Verify whether CiscoJabber for Mac1 ofgroup1 attends the callfrom Cisco Jabber forMac2 of group2 of samecluster

Attendinggroup call fromanother group

UCJ11.5S.CJM.G.057

PassedNAVerify whether CiscoJabber for Mac is able toremove my chat roomssuccessfully

Removingpersistent chatrooms fromMy rooms

UCJ11.5S.CJM.G.042

PassedNAVerify whether CiscoJabber for Mac1 is ableto send persistent chatinvite to Cisco Jabber forMac2 by exceeding theparticipant limit

Exceeding theparticipantlimit inpersistent chatroom

UCJ11.5S.CJM.G.045

PassedNAVerify whether CiscoJabber for Mac1 is ableto remove Cisco Jabberfor Windows from thechat room successfully

Removingmembers fromthe chat room

UCJ11.5S.CJM.G.049

PassedNAVerify whether CiscoJabber for Mac is able toedit the persistent chatroom name successfully

Editingpersistent chatroom name ofCJM

UCJ11.5S.CJM.G.051

PassedNAVerify chat rooms areadded successfully inCisco Jabber forWindows which iscreated using double bytecharacters in CiscoJabber for Mac

Add chatrooms withdouble bytecharacters

UCJ11.5S.CJM.G.052

PassedNAVerify Cisco Jabber forMac1 is able to do P2Pchat with Cisco Jabberfor Mac2 whoparticipates in persistentchat at same time.

P2P chat withpersistent chatroommembersin CJM

UCJ11.5S.CJM.G.053

PassedNAVerify whether CiscoJabber for Mac is able tocreate a group chat withthe same persistent chatroom memberssuccessfully

Creating agroup chatwith the sameparticipantsfrom thepersistent chat

UCJ11.5S.CJM.G.054



CSCux53851FailedNAVerify whether CiscoJabber for Mac is able toreceive text and alsoemoticons throughbroadcast message fromCisco Jabber forWindows successfully

ReceivingBroadcastmessage withtext andemoticonsfrom CiscoJabber forWindows

UCJ11.5S.CJM.G.077

CSCux53871FailedNAVerify whether CiscoJabber for Mac is able toadd the custom tab URIof CUP and check theURI is redirecting to theCUP web pagesuccessfully

Redirectingcustom tabURI from thehub menu

UCJ11.5S.CJM.G.078

PassedNAVerify whether theusername field isavailable for user inputon first logon in CiscoJabber for Macsuccessfully

Username fieldis available forthe first loginin CJM

UCJ11.5Ph2S.CJM.G.001

PassedNAVerify whether theusername field becomesread only mode with thesame user for allsubsequent logins inCisco Jabber for Macsuccessfully

Username fieldbecomes readonly for allsubsequentlogins with thesame user inCJM


PassedNAVerify whether theusername field becomeseditable once afterresetting Cisco Jabber forMac successfully

Username fieldbecomeseditable afterresetting CJM


PassedNAVerify whether thecustom ringtones aredisplayed in Cisco Jabberfor Mac successfully

Display ofcustomringtones inCJM


PassedNAVerify whether all thecustom ringtones areplayed in Cisco Jabberfor Mac successfully

Click and playall customringtones inCJM




PassedIP Phone A -> UnifiedCM -> IP Phone B ->Unified CM ->CJM

Verify whether theClassic Ringer ringtoneis played when a call istransferred to CiscoJabber for Mac from anyCisco IP Phonesuccessfully

Set ringtone asClassic Ringerand transfer acall to CJM


PassedIP Phone -> UnifiedCM ->CJW ->UnifiedCM ->CJM

Verify whether theRipples ringtone isplayed when a call isforwarded to CiscoJabber for Mac fromCisco Jabber forWindows successfully

Set customringtone asRipples andforward a callfrom CJW


PassedNAVerify whether huntgroup notification isshown once log out ofHunt Group in CiscoJabber for Macsuccessfully

Hunt Grouplogoutnotification inCJM


PassedCJW ->Unified CM ->CJM

Verify whether CiscoJabber for Mac is able toattend the call whenCisco Jabber forWindows dials to HuntPilot Number

Add CJM inthe hunt groupand establishcall from CJWto CJM usinghunt pilotnumber


PassedCJI -> Unified CM ->CJM

Verify whether CiscoJabber for Mac present inthe Line Group attendsthe call from CiscoJabber for iPhone when"Top Down" DistributionAlgorithm is configuredin the Line group

Add CJM inHunt Groupwith TopDownalgorithm andmake a call toCJM from CJIusing HuntPilot Number


PassedCJA -> Unified CM ->CJM2

Verify whether CiscoJabber forMac fromLineGroup 2 attends the callfrom Cisco Jabber forAndroid when two Linegroups are mapped tosingle Hunt list

Create twoLine Groupsand map theminto singleHunt List




PassedCJW ->Unified CM ->CJM ->Unified CM ->IP Phone C

Verify whether CiscoJabber for Mac attendsthe incoming call fromCisco Jabber forWindows dials Hunt PilotNumber and transfers thecall to any Cisco IPPhone successfully

CJM attendsthe incomingcall from HuntPilot Numberand transfersthe call to anyCisco IP Phone


PassedIP Phone A -> UnifiedCM -> IP Phone BCJW ->Unified CM ->CJM

Verify whether the call isforwarded to CiscoJabber for Mac whendevices in a Hunt Groupare busy successfully

CallForwarded toCJM when thedevices in aHunt Group isbusy


PassedNAVerify whether CiscoJabber for Mac2 is ableto invite members to chatroom created by CiscoJabber for Mac1successfully

Moderatorsinvitingmembers tochat room inCJM


PassedNAVerify whether CiscoJabber for Mac2 is ableto join passwordprotected chatroomcreated by Cisco Jabberfor Mac1 successfully

Join thepasswordprotected chatroom in CJM


PassedNAVerify whether CiscoJabber for Mac2 is ableto remove itself from achat room created byCisco Jabber forMac1 byclicking RemoveMembership buttonsuccessfully

CJM2 removedby itself from achat roomcreated byCJM1


PassedNAVerify whether CiscoJabber for Mac2 andCisco Jabber forWindows are able todownload the filestransferred from CiscoJabber for Mac1 duringpersistent chatsuccessfully

File downloadby all the chatmembersduringpersistent chat




PassedNAVerify whether CiscoJabber for Mac1 is ableto receive an errormessage automaticallyduring chat when primarychat service is downsuccessfully

Receive anerror messagewhen primarychat service isdown in CJM


PassedNAVerify whether CiscoJabber for Mac1 is ableto view the chat serviceby clicking show moreoption with secondarychat service successfully

View the chathistory withthe secondaryservice


PassedNAVerify whether IM isshown in the chatwindow in Cisco Jabberfor Mac1, Cisco Jabberfor Mac2, and CiscoJabber for iPhonesuccessfully

IM is shown asread in all thedevices loggedon with thesame user


PassedNAVerify whether CiscoJabber for Mac1 is ableto send a file to CiscoJabber for Android, CiscoJabber for Windows andCisco Jabber for Mac2successfully

Transfer a filefrom CJM tomultipledevices loggedon with thesame user


PassedNAVerify whether theJapanese characters (ひらがな,カタカナ,会意)are displaying correctlyin Cisco Jabber for Macwhile doing chat

Use Japanesecharacters (ひらがな,カタカナ,会意)while chattingin CJM


PassedNAVerify whether theJapanese characters (ひらがな,カタカナ,会意)are displayed correctly inCisco Jabber for Macwhile creating / editingchat rooms

Use Japanesecharacters (ひらがな,カタカナ,会意)while addingchat rooms inCJM


PassedNAVerify whether theJapanese date format(YYYY/MM/DD) isdisplayed correctly inCisco Jabber for Macwhile viewing the chathistory details

Display of dateformat(YYYY/MM/DD)in CJM whileviewing thechat historydetails




PassedCJI -> Unified CM ->CJM

Verify whether CiscoJabber for Mac is able toattend the call whenCisco Jabber for iPaddials to Hunt PilotNumber

Add CJM inthe hunt groupand establishcall from CJIto CJM usinghunt pilotnumber


PassedCJA -> Unified CM ->CJM

Verify whether theMischief ringtone isplayed when CiscoJabber forMac getting anincoming call fromCiscoJabber for Androidsuccessfully

Set ringtone asMischief andmake a callfrom CJA toCJM


PassedNAVerify whether CiscoJabber for Mac is able toget a file from CiscoJabber for Windowswhen logged withmultiple device with thesame user

Transfer a filefrom CJW tomultipledevices loggedon with thesame user


PassedNAVerify whether CiscoJabber for Android, CiscoJabber for iPhone andCisco Jabber for Mac isable to receive screencapture from CiscoJabber for Windowswhen MDM enabled

Send a screencapture fromCJW tomultipledevices loggedon with sameuser


Cisco SparkDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedNAVerify instantmessage withpeople issuccessful fromCisco Spark forWindows usingactivated E-mailaccount

Chat withpeopleinstantlyusing theirE-mailaccount

UCJ11.5S.Spark.G.003


Test Results SummaryCisco Spark

PassedNAVerify user is ableto create Sparkroom with list ofpeople when theylogin first timefrom Cisco Sparkfor Windows

Create aSpark roomwhen userlogin for firsttime


PassedNAVerify user is ableto mark 1-To-1room as favoritein Cisco Spark forWindows

Mark 1-To-1room asfavorite inCisco Sparkfor Windows


PassedNAVerify user is ableto create 1-To-1room and sendinstant messagesto people who arein different E-maildomain

Create 1-To-1roominstantly withdifferentdomain users


PassedNAVerify user is ableto view number ofpeople present in1-To-1 room fromCisco Spark forWindows

People countin 1-To-1room


PassedNAVerify user is ableto send andreceive instantmessages in1-To-1 room fromCisco Spark forWindows

Send andreceive IM in1-To-1 room


PassedNAVerify user is ableto see visual alertnotification whenreceiving instantmessages in1-To-1 room fromCisco Spark forWindows

Visual alertnotificationwhenreceiving IM


PassedNAVerify user is ableto delete theinstant messagesin 1-To-1 room

Delete themessage in1-To-1 room




PassedNAVerify Sparkclient isdisplayingmessages withdate and time in1-To-1 room fromCisco Spark forWindows

Displaymessageswith date andtime in1-To-1 room


PassedNAVerify user is ableto create Sparkroom title inJapanese fromCisco Spark forWindows

Room namein Japanesecharacterswhen creatingSpark Room


PassedNAVerify user is ableto add anotheruser to currentSpark room

Add user toSpark room


PassedNAVerify user is ableto remove peoplefrom Spark room

Removepeople fromSpark room


PassedNAVerify user is ableto leave or exitfrom 1-To-1 roomfrom Cisco Sparkfor Windows

Leave from1-To-1 room


PassedSpark for Windows1 ->Spark Cloud -> Spark forWindows2

Verify user is ableto make a videocall from 1-To-1room from CiscoSpark forWindows

Start videocall from1-To-1 roomusing CiscoSpark forWindows


PassedSpark for Windows1 ->Spark Cloud -> Spark forWindows2 -> Spark forWindows3

Verify user is ableto start video callin Spark roomfrom Cisco Sparkfor Windows

Start videocall in Sparkroom fromSpark forWindows



Verify user is ableto view calldetails of videocall in 1-To-1room from CiscoSpark forWindows

Call details ofvideo call in1-To-1 room





Verify user is ableto start a videocall from 1-To-1room and sharescreen usingSpark forWindows

Start a Videocall from1-To-1 roomand sharescreen usingSpark forWindows


PassedNAVerify user is ableto send document(*.doc) file in1-To-1 room fromCisco Spark forWindows1 toCisco Spark forWindows2

Send doc filein 1-To-1room


PassedNAVerify user is ableto send more than10 attachments inSpark room andview recentcontent fromCisco Spark forWindows

Send morethan 10attachmentsin Sparkroom andview recentcontent


PassedNAVerify calendarconnectorconnection withCisco Spark cloudmanagementportal issuccessful

Calendarconnectorconnectionwith CiscoSpark cloudmanagementportal


PassedNAVerify callconnectorconnection withCisco Spark cloudmanagementportal

Callconnectorconnectionwith CiscoSpark cloudmanagementportal


PassedNAVerify user is ableto add UnifiedCM server in callconnector ofcloud extensionsin expressway

Add UnifiedCM server incall connector




PassedNAVerify user is ableto send differentfile formats in1-To-1 room fromCisco Spark forWindows1 toCisco Spark forWindows2

Send differentfile formats in1-To-1 room


PassedNAVerify user is ableto notify peoplewho unchecked'Mark asImportant' inSpark room using@mentions

Use@mentions inSpark room


PassedNAVerify user is ableto filter and viewmessagesavailable in@mentions menuin left side ofCisco Spark forWindows

View@mentionsfilter to view@mentionsmessages


Cisco Jabber GuestDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedJabber guest client(Windows) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> SX10 Quick Set-> Presentation Sharing

To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenJabber guest clienton Windows andCisco TelePresenceSX10 Quick Set viaCisco Expressway-E

Presentationsharing invideo callbetweenJabber guestclient onWindows andSX10 QuickSet via CiscoExpressway-E

UCJ11.5S.JG.G.001


Test Results SummaryCisco Jabber Guest

PassedJabber guest client (iOS)-> Cisco Expressway-E-> Cisco Expressway-C-> Unified CM -> SX20Quick Set -> PresentationSharing

To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenJabber guest clienton iOS and CiscoTelePresence SX20Quick Set via CiscoExpressway-E

Presentationsharing invideo callbetweenJabber guestclient on iOSand SX20Quick Set viaCiscoExpressway-E

UCJ11.5S.JG.G.004

PassedJabber guest client(Android) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> SX10 Quick Set-> Presentation Sharing

To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenJabber guest clienton Android andCisco TelePresenceSX10 Quick Set viaCisco Expressway-E

Presentationsharing invideo callbetweenJabber guestclient onAndroid andSX10 QuickSet via CiscoExpressway-E

UCJ11.5S.JG.G.005

PassedJabber guest client (iOS)-> Cisco Expressway-E-> Cisco Expressway-C-> Unified CM ->DX70/DX80 ->Presentation Sharing

To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenJabber guest clienton iOS and CiscoDX70/80 via CiscoExpressway-E

Presentationsharing invideo callbetweenJabber guestclient on iOSand DX seriesendpoints viaCiscoExpressway-E

UCJ11.5S.JG.G.007

PassedJabber guest client(Android) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> DX70/DX80 ->Presentation Sharing

To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenJabber guest clienton Android andCisco DX70/80 viaCisco Expressway-E

Presentationsharing invideo callbetweenJabber guestclient onAndroid andDX seriesendpoints viaCiscoExpressway-E

UCJ11.5S.JG.G.008



PassedJabber guest client (iOS)-> Cisco Expressway-E-> Cisco Expressway-C-> Unified CM ->MX200-G2

To Verify that user isable to do auto startvideo call betweenJabber guest clienton iOS and CiscoTelePresenceMX200-G2 viaCisco Expressway-E

Video callbetweenJabber guestclient on iOSandMX200-G2via CiscoExpressway-E

UCJ11.5S.JG.G.010

PassedJabber guest client(Android) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> MX200-G2

To Verify that user isable to do auto startvideo call betweenJabber guest clienton Android andCisco TelePresenceMX200-G2 viaCisco Expressway-E

Video callbetweenJabber guestclient onAndroid andMX200-G2via CiscoExpressway-E

UCJ11.5S.JG.G.011

PassedJabber guest client(Windows) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> DX70/DX80

To Verify that user isable to do auto startvideo call betweenJabber guest clienton Windows andCisco DX 70/80endpoints via CiscoExpressway-E

Video callbetweenJabber guestclient onWindows andDX seriesendpoints viaCiscoExpressway-E

UCJ11.5S.JG.G.012

PassedJabber guest client (iOS)-> Cisco Expressway-E-> Cisco Expressway-C-> Unified CM ->DX70/DX80

To Verify that user isable to do auto startvideo call betweenJabber guest clienton iOS and CiscoDX DX70/DX80endpoints via CiscoExpressway-E

Video callbetweenJabber guestclient on iOSand DX seriesendpoints viaCiscoExpressway-E

UCJ11.5S.JG.G.013

PassedJabber guest client(Windows) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> EX90

To Verify that OpusCodec is used invideo call betweenJabber guest clienton Windows andCisco TelePresenceSystem EX90 viaCisco Expressway-E

Video callbetweenJabber guestclient onWindows andEX90 viaCiscoExpressway-E

UCJ11.5S.JG.G.014



PassedJabber guest client (iOS)-> Cisco Expressway-E-> Cisco Expressway-C-> Unified CM -> EX90

To Verify that OpusCodec is used invideo call betweenJabber guest clienton iOS and CiscoTelePresence SystemEX90 via CiscoExpressway-E

Video callbetweenJabber guestclient on iOSand EX90 viaCiscoExpressway-E

UCJ11.5S.JG.G.015

PassedJabber guest client(Android) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> IntegratorPackage C90

To Verify that OpusCodec is used invideo call betweenJabber guest clienton Android andCisco TelePresenceSystem IntegratorPackage C90 viaCisco Expressway-E

Video callbetweenJabber guestclient onAndroid andIntegratorPackage C90via CiscoExpressway-E

UCJ11.5S.JG.G.016

PassedJabber guest client(Windows) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> 7821

To Verify that OpusCodec is used invideo call betweenJabber guest clienton Windows andCisco Unified IPPhone 7821 viaCisco Expressway-E

Audio callbetweenJabber guestclient onWindows and7821 via CiscoExpressway-E

UCJ11.5S.JG.G.017

PassedJabber guest client(Windows) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> EX90

To Verify that user isable to make a callwithout videobetween Jabber guestclient on Windowsand CiscoTelePresence SystemEX90 via CiscoExpressway-E

Call withoutvideo betweenJabber guestclient onWindows andEX90 viaCiscoExpressway-E

UCJ11.5S.JG.G.018

PassedJabber guest client (iOS)-> Cisco Expressway-E-> Cisco Expressway-C-> Unified CM -> EX90

To Verify that user isable to make a callwithout videobetween Jabber guestclient on iOS andCisco TelePresenceSystem EX90 viaCisco Expressway-E

Call withoutvideo betweenJabber guestclient on iOSand EX90 viaCiscoExpressway-E

UCJ11.5S.JG.G.019



PassedJabber guest client(Android) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> IntegratorPackage C90

To Verify that user isable to make a callwithout videobetween Jabber guestclient on Androidand CiscoTelePresence SystemIntegrator PackageC90 via CiscoExpressway-E

Call withoutvideo betweenJabber guestclient onAndroid andIntegratorPackage C90via CiscoExpressway-E

UCJ11.5S.JG.G.020

PassedJabber guestclient(IOS)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->SX80Codec->PresentationSharing

To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenCisco Jabber Guestclient on IOS andCisco TelePresenceSX80 Codec viaCisco Expressway-E

Presentationsharing invideo callbetweenJabber Guestclient on iOSand SX80Codec Set viaCiscoExpressway-E

UCJ11.5PH2S.JG.G.001

PassedJabber guestclient(Android)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->MX200G2->Presentation Sharing

To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenCisco Jabber Guestclient on Androidand CiscoTelePresenceMX200G2 via CiscoExpressway-E

Presentationsharing invideo callbetweenJabber Guestclient onAndroid andMX200 G2Set via CiscoExpressway-E


PassedJabber guestclient(Android)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->DX80->PresentationSharing

To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenCisco Jabber Guestclient on Androidand Cisco DX80 viaCisco Expressway-E

Presentationsharing invideo callbetweenJabber Guestclient onAndroid andDX80 Set viaCiscoExpressway-E




PassedJabber guestclient(Windows)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->MX300G2->Presentation Sharing

To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenCisco Jabber Guestclient on Windowsand CiscoTelePresenceMX300 G2endpoints via CiscoExpressway-E

Presentationsharing invideo callbetweenJabber Guestclient onWindows andMX300 G2endpoints viaCiscoExpressway-E


PassedJabber guestclient(MAC)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->DX80->PresentationSharing

To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenCisco Jabber Guestclient on MAC andCisco DX80endpoint via CiscoExpressway-E

Presentationsharing invideo callbetweenJabber Guestclient onMACand DX80endpoint viaCiscoExpressway-E


PassedJabber guestclient(Android)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->SX80Codec->PresentationSharing

To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenCisco Jabber Guestclient on Androidand CiscoTelePresence SX80Codec via CiscoExpressway-E

Presentationsharing invideo callbetweenJabber Guestclient onAndroid andSX80 Codecendpoints viaCiscoExpressway-E


PassedJabber guestclient(Windows)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->SX80 Codec

To Verify that user isable to do auto startvideo call betweenCisco Jabber Guestclient on Windowsand CiscoTelePresence SX80Codec via CiscoExpressway-E

Video callbetweenjabber Guestclient onwindows andSX80 Codecvia CiscoExpressway-E




PassedJabber guestclient(IOS)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->DX70

To Verify that user isable to do auto startvideo call betweenCisco Jabber Guestclient on IOS andCisco DX70 viaCisco Expressway-E

Video callbetweenJabber Guestclient on iOSand DX70 viaCiscoExpressway-E


PassedJabber guestclient(Windows)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->DX80

To Verify that user isable to do auto startvideo call betweenCisco Jabber Guestclient on Windowsand Cisco DX80 viaCisco Expressway-E

Video callbetweenJabber Guestclient onwindows andDX80 viaCiscoExpressway-E


PassedJabber guestclient(MAC)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->IntegratorPackageC90

To Verify that user isable to do auto startvideo call betweenCisco Jabber Guestclient on MAC andCisco TelePresenceSystem IntegratorPackage C90 viaCisco Expressway-E

Video callbetweenJabber Guestclient on Macand IntegratorPackage C90via CiscoExpressway-E


PassedJabber guestclient(IOS)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->DX650

To Verify that user isable to do auto startvideo call betweenCisco Jabber Guestclient on IOS andCisco DX650 viaCisco Expressway-E

Video callbetweenjabber Guestclient on iOSand DX650via CiscoExpressway-E


Cisco TelePresence Video Communication ServerDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedNAVerify whetherCisco TelePresenceVideoCommunicationServer is named as"Expressway/VCSBase"when systemis in pre-activationstate

"Expressway/VCSBase" whensystem is inpre-activationstate

UCJ11.5S.VCS.G.001


Test Results SummaryCisco TelePresence Video Communication Server

PassedNAVerify whether'Cloud Extension'is renamed as'Hybrid Services' inCisco TelePresenceVideoCommunicationServer underApplication menu

"CloudExtension" isrenamed as'HybridServices'

UCJ11.5S.VCS.G.002

PassedNAVerify whetherCisco TelePresenceVideoCommunicationServer can bedeployedsuccessfully onVMware ESXi 6.0

Deploy CiscoVCS onVMwareESXi6.0

UCJ11.5S.VCS.G.003

PassedNAVerify whether'Filter ByKeyword' is addedfor Syslog Outputin CiscoTelePresenceVideoCommunicationServer underMaintenance ->Logging

Keyword filteris added forsyslog output

UCJ11.5S.VCS.G.004

PassedNAVerify whetherTransportConnectionconfigurations areadded for SyslogOutput in CiscoTelePresenceVideoCommunicationServer underMaintenance ->Logging

TransportConnectionconfigurationsare added forsyslog output

UCJ11.5S.VCS.G.005



PassedSX10 Quick Set ->Cisco VCS Expressway->CiscoVCS ->UnifiedCM -> Cisco VCS ->Cisco VCS Expressway-> MX200-G2 ->Presentation Sharing

Verify whetherpresentation can beshared from CiscoTelePresence SX10Quick Set to CiscoTelePresenceMX200-G2 bothregistered withCisco UnifiedCommunicationsManager viaCollaboration Edge

Presentationsharing fromSX10 QuickSet toMX200-G2both registeredviaCollaborationEdge

UCJ11.5S.VCS.G.006

PassedMX300-G2 -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> Cisco VCS ->Cisco VCS Expressway-> SX20 Quick Set

Verify whether thevideo call fromCisco TelePresenceMX300-G2 toCisco TelePresenceSX20 Quick Setboth registeredwith Cisco UnifiedCommunicationsManager viaCollaboration Edgecan be establishedsuccessfully

Making videocall fromMX300-G2and SX20Quick Set bothregistered viaCollaborationEdge

UCJ11.5S.VCS.G.007

PassedSX10 Quick Set ->Unified CM -> CiscoVCS -> Cisco VCSExpressway -> SX80Codec -> Hold/Transfer-> Cisco VCSExpressway -> CiscoVCS -> Unified CM ->DX80

Verify whether theconsultative calltransfer fromCiscoTelePresence SX80Codec registeredwith Cisco UnifiedCommunicationsManager viaCollaboration Edgeto Cisco DX80registered withCisco UnifiedCommunicationsManager workssuccessfully

Consultativecall transferfrom SX80Codec toDX80 viaCollaborationEdge

UCJ11.5S.VCS.G.009



PassedMX300-G2 -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> SX10 Quick SetMX300-G2 -> Add ->Cisco VCS Expressway->CiscoVCS ->UnifiedCM -> EX90(Hold/Resume)

Verify whetherHold / Resume avideo conferenceamong CiscoTelePresenceMX300-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge, CiscoTelePresence SX10Quick Set andCisco TelePresenceSystem EX90 bothregistered withCisco UnifiedCommunicationsManager workssuccessfully

Hold/Resumea videoconferenceamongMX300-G2 ,SX10 QuickSet and EX90viaCollaborationEdge

UCJ11.5S.VCS.G.010

PassedMX300-G2 -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> DX80 ->Presentation Sharing

Verify whetherpresentation can beshared from CiscoTelePresenceMX300-G2registered withCisco UnifiedCommunicationsManager viaCollaboration Edgeto Cisco DX80registered withCisco UnifiedCommunicationsManager

Presentationsharing fromMX300-G2 toDX80 viaCollaborationEdge

UCJ11.5S.VCS.G.013



PassedMX300-G2 -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> DX80MX300-G2 -> Add ->Cisco VCS Expressway->CiscoVCS ->UnifiedCM-> EX90->Conference

Verify whether thevideo conferenceamong CiscoTelePresenceMX300-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge, Cisco DX80and CiscoTelePresenceSystem EX90 bothregistered withCisco UnifiedCommunicationsManager workssuccessfully

Making videoconferenceamongMX300-G2,DX80&EX90viaCollaborationEdge

UCJ11.5S.VCS.G.014

PassedMX200-G2-> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM (Publisher) -> 88617841 -> Cisco VCSExpressway -> CiscoVCS -> Unified CM(Subscriber) -> 8861

Verify whetherCisco TelePresenceMX200-G2registered in CiscoUnifiedCommunicationsManager Publishervia CollaborationEdge and CiscoUnified IP Phone8861 registeredwith Cisco UnifiedCommunicationsManager Publisherare registered toCisco UnifiedCommunicationsManagersubscriber whenthe publisher isdown and call isestablishedsuccessfully

Making callfromMX200-G2registered inUnified CMCluster viaCollaborationEdge to IPPhone 8861registered withUnified CMCluster whenUnified CMPublisher isdown

UCJ11.5S.VCS.G.019



PassedEX90 -> Cisco VCSExpressway (Primary)-> CiscoVCS ->UnifiedCM -> Cisco VCS ->Cisco VCS Expressway(Primary) -> SX10Quick SetEX90 -> Cisco VCSExpressway(Secondary)-> CiscoVCS ->UnifiedCM -> Cisco VCS->Cisco VCSExpressway (Secondary)-> SX10 Quick Set

Verify whetherVideo call is alivebetween CiscoTelePresenceSystem EX90registered viaCollaboration Edge& CiscoTelePresence SX10Quick Setregistered in CiscoUnifiedCommunicationsManager whenCisco VCSExpresswayPrimary goes downin CollaborationEdge

Checking callstatus betweenEX90registered viaCollaborationEdge andSX10 QuickSet registeredin Unified CMwhen PrimaryCisco VCSExpresswaygoes down inCollaborationEdge

UCJ11.5S.VCS.G.020

PassedDX80 -> Unified CM ->Integrator Package C90

Verify whetherauto answer workssuccessfully inCisco TelePresenceSystem IntegratorPackage C90registered withCisco UnifiedCommunicationsManager whenconfigured usingRemote Control

ConfigureAuto Answerin IntegratorPackage C90using RemoteControl

UCJ11.5S.VCS.G.024

PassedNAVerify whetherfactory reset can bedone on the Touch10" paired withCisco TelePresenceSX80 Codecsuccessfully

Factory resetof Touch10"which is pairedwith SX80Codec

UCJ11.5S.VCS.G.025



PassedSX10 Quick Set(Presentation Sharing)-> Cisco VCS -> SX20Quick Set

Verify whether thepresentation isshared from CiscoTelePresence SX10Quick Set to CiscoTelePresence SX20Quick Set onsetting presentationresolution to1080p5 which areregistered withCisco TelePresenceVideoCommunicationServer

Presentationsharing fromSX10 QuickSet to SX20Quick Set bysettingpresentationresolution to1080p5

UCJ11.5S.VCS.G.026

PassedNAVerify whether thedisplay of CiscoTelePresence SX20Quick Set showsPhoenix OSDwhen it is in Activemode

CheckingPhoenix OSDin SX20QuickSet in activemode

UCJ11.5S.VCS.G.027

PassedNAVerify whetherstatic IP addresscan be assigned toCisco TelePresenceSX20 Quick Setusing the newPhoenix UI inActive mode

Assign StaticIP Address toSX20 QuickSet using thenew PhoenixOSD UI

UCJ11.5S.VCS.G.028

PassedNAVerify whether thewarning messages"This touch panelis not supported.Please use thelatest model,Touch 10" isdisplayed in CiscoTelePresence SX20Quick Set whenTouch 8 isconnected

Checking forwarningmessage thatsays Touch 8"is notsupported inSX20 QuickSet.

UCJ11.5S.VCS.G.029

PassedNAVerify whether thenew resolution1920 x 1200 ispresent in CiscoTelePresence SX80Codec

New inputresolutionWUXGA forSX80 Codec

UCJ11.5S.VCS.G.031



PassedSX80 Codec,MX200-G2 &MX300-G2 -> CiscoVCS -> Conductor ->Cisco TS on VM ->Lecture Conference

Verify whether themultistreamconference isestablishedbetween CiscoTelePresence SX80Codec, CiscoTelePresenceMX200-G2 andCisco TelePresenceMX300-G2registered to CiscoTelePresenceVideoCommunicationServer during alecture conferencewhich uses CiscoTelePresenceServer on VM asconference bridgevia CiscoTelePresenceConductor

Multistreamconferencebetween SX80Codec,MX200-G2andMX300-G2during alectureconferenceusing CiscoTelePresenceServer on VMvia Conductor

UCJ11.5S.VCS.G.032

PassedNAVerify whetherAndroid phone canbe paired withCisco TelePresenceSX20 Quick Setregistered withCisco TelePresenceVideoCommunicationServer throughCisco Proximitysuccessfully.

Pairing ofAndroid phonewith SX20Quick Setregistered withCisco VCS.

UCJ11.5S.VCS.G.035

PassedNAVerify whether theMultiway optionhas been removedin CiscoTelePresence SX80Codec

Discontinuationof Multiwayoption inSX80 Codec

UCJ11.5S.VCS.G.036



PassedSX10 Quick Set ->Unified CM ->MX200-G2

Verify whether theLED of externalmicrophoneconnected withCisco TelePresenceMX200-G2 is litwhen a call withCisco TelePresenceSX10 Quick Set ison progress.

Checking theexternalmicrophoneLEDconnectedwithMX200-G2while in a call.

UCJ11.5S.VCS.G.038

PassedNAVerify whetherrunning the SetupAssistant of CiscoTelePresence SX20Quick Set throughTRC6 requires aprotection pin

Checking theauthenticationrequirementfor SetupAssistant ofSX20 QuickSet in activemode

UCJ11.5S.VCS.G.039

PassedNAVerify whether theresult of xStatuscommand ischanged fromCE8.0 in CiscoTelePresence SX20Quick Set.

Checking thechanges inresult ofxStatuscommand inxAPI of SX20Quick Set

UCJ11.5S.VCS.G.041

PassedNAVerify whether theremote monitoringis disabled in WebUI of CiscoTelePresence SX20Quick Set and"Video snapshotsare currentlydisabled" messageis displayed in thecall control page ofthe web GUI

Checking forrestrictions ofremotemonitoring inSX20 QuickSet.

UCJ11.5S.VCS.G.042

PassedNAVerify whetherOSD of CiscoTelePresence SX10Quick Set ischanged with newUI in Active mode

Checking fornew UI inOSD of SX10Quick Set inactive mode

UCJ11.5S.VCS.G.043



PassedNAVerify whether theultrasound pairingquality of CiscoTelePresence SX80Codec can bemeasured usingVU meter.

Checkultrasoundpairing qualityof SX80Codec usingVU meter

UCJ11.5S.VCS.G.045

PassedNAVerify whetherCisco TelePresenceSX80 Codec canbe provisionedfrom web UI toCisco UnifiedCommunicationsManager usingHTTPSsuccessfully

ProvisionSX80 Codecto Unified CMusing HTTPS

UCJ11.5S.VCS.G.046

PassedIntegrator Package C90-> Unified CM -> EX90

Verify whether thecamera of CiscoTelePresenceSystem EX90 iscontrolled by CiscoTelePresenceSystem IntegratorPackage C90 usingRemote Controlduring video call,both are registeredwith Cisco UnifiedCommunicationsManager

ControlCamera ofremoteparticipant inIntegratorPackage C90using RemoteControl

UCJ11.5S.VCS.G.047



PassedSX10 Quick Set ->Unified CM ->Integrator Package C90-> Add -> Unified CM-> SX20 Quick Set

Verify whether thelayout can bechanged usingRemote Control inCisco TelePresenceSystem IntegratorPackage C90during Multisiteconference withCisco TelePresenceSX10 Quick Setand CiscoTelePresence SX20Quick Set workssuccessfully , allare registered withCisco UnifiedCommunicationsManager

Change layoutin IntegratorPackage C90using RemoteControl duringMultisiteconference

UCJ11.5S.VCS.G.048

PassedSX80 Codec -> CiscoVCS -> SIP Trunk ->Unified CM -> DX650

Verify whetheraudio call fromCisco TelePresenceSX80 Codecregistered withCisco TelePresenceVideoCommunicationServer to CiscoDX650 registeredwith Cisco UnifiedCommunicationsManager workssuccessfully

Audio callfrom SX80Codecregistered inCisco VCS toDX650registered inUnified CM

UCJ11.5S.VCS.G.053

PassedSX80 Codec -> UnifiedCM -> DX650 ->Hold/Resume

Verify whetherHold/Resumeaudio call fromCisco TelePresenceSX80 Codec toCisco DX650 bothregistered withCisco UnifiedCommunicationsManager workssuccessfully

Hold/Resumeaudio call fromSX80 Codecto DX650registered inUnified CM

UCJ11.5S.VCS.G.054



PassedSX80 Codec(Presentation Sharing)-> Unified CM ->DX70(line 2)

Verify whetherpresentation can beshared from CiscoTelePresence SX80Codec to line 2 ofCisco DX70 bothregistered withCisco UnifiedCommunicationsManager workssuccessfully

Presentationsharing fromSX80 Codecto line 2 ofDX70registered inUnified CM

UCJ11.5S.VCS.G.055

PassedNAVerify whetherbandwidth isreduced from10000mbps to6000mbps in CiscoTelePresence SX80Codec afterupgrading to CE8.0

Bandwidthreduction inSX80 Codecfrom10000mbps to6000mbpsafterupgrading toCE 8.0

UCJ11.5S.VCS.G.061

PassedSX80 Codec -> UnifiedCM -> SX10 Quick Set

Verify whether callfrom CiscoTelePresence SX80Codec to CiscoTelePresence SX10Quick Set with callrate as 6000mbpsboth registeredwith Cisco UnifiedCommunicationsManager

Making callfrom SX80Codec toSX10 QuickSet withbandwidth6000mbps

UCJ11.5S.VCS.G.062

PassedNAVerify whetherCisco TelePresenceSX80 Codecdetects the whiteboard andautomaticallyadjusted viaSpeaker Track 60according toconfigured snap towhite boardsettings

Snap toWhiteboardimprovementin SX80Codec usingSpeaker Track60

UCJ11.5S.VCS.G.063



PassedSX20 Quick Set ->Unified CM cluster 1 ->500-32 -> Call ForwardAll -> Unified CMcluster 1 -> SIP Trunk-> Unified CM cluster 2-> DX650

Verify whether callfor CiscoTelePresenceSystem 500-32registered withCisco UnifiedCommunicationsManager cluster 1is forwarded toCisco DX650registered withCisco UnifiedCommunicationsManager cluster 2

Call ForwardAll from500-32 toDX650registered inUnified CMthrough SIPTrunk

UCJ11.5S.VCS.G.071

PassedSX20 Quick Set ->Unified CMCluster 1 ->500-32SX10 Quick Set ->Unified CMCluster 1 ->500-32 -> Call ForwardBusy -> Unified CMCluster 1 -> SIP Trunk-> Unified CM Cluster2 -> DX650

Verify whether callfor CiscoTelePresenceSystem 500-32registered withCisco UnifiedCommunicationsManager Cluster 1is forwarded toCisco DX650registered withCisco UnifiedCommunicationsManager Cluster 2when CiscoTelePresenceSystem 500-32 isbusy

Call ForwardBusy for500-32 toDX650through SIPTrunk

UCJ11.5S.VCS.G.073

PassedDX70 -> Unified CM ->SX20 Quick Set

Verify whether callstatistics can beaccessed from callpage when CiscoDX70 is in videocall with CiscoTelePresence SX20Quick Set bothregistered withCisco UnifiedCommunicationsManager

Access callstatistics fromDX70 duringvideo call

UCJ11.5S.VCS.G.076



PassedNAVerify whetheralternate UDSserver can beadded to CiscoDX70 registeredwith Cisco UnifiedCommunicationsManager

Add alternateUDS server inDX70

UCJ11.5S.VCS.G.077

PassedNAVerify whether callsearch field ofDirectory CiscoDX70 registeredwith Cisco UnifiedCommunicationsManager , pullsresult fromRecents, Favorites,Contacts and

Call searchfield pullsresult fromRecents,Favorites,Contacts andDirectory inDX70

UCJ11.5S.VCS.G.078

PassedDX70 -> Unified CM ->EX90

Verify whether thecall can be madeby two steps fromcontact details inCisco DX70registered withCisco UnifiedCommunicationsManager

Two stepscalling for thecontact detailsin DX70

UCJ11.5S.VCS.G.079

PassedNAVerify whetherpassword to accesssettings for CiscoDX70 can be setusing commonphone profile forCisco DX70

Set passwordfor settings inDX70

UCJ11.5S.VCS.G.080



PassedEX90 -> Unified CM ->DX70 (ViewingPresentation)

Verify whether thecall from CiscoTelePresenceSystem EX90 toCisco DX70 isanswered and PiPof video isescalated to fullscreen by doubletapping in CiscoDX70 whenviewingpresentation, bothregistered withCisco UnifiedCommunicationsManager

Escalate thevideo PiP tofull screen inDX70 whenviewingpresentation

UCJ11.5S.VCS.G.081

PassedSX10 Quick Set ->Unified CM -> DX70(line 2) (ViewingPresentation )

Verify whether thepresentation isviewedcontinuously inCisco DX70 whenvideo call fromCisco TelePresenceSX10 Quick Set isanswered in line 2of Cisco DX70,both are registeredwith Cisco UnifiedCommunicationsManager

Stay viewingpresentationafteransweringvideo call inline 2 of DX70

UCJ11.5S.VCS.G.082

PassedNAVerify whetherFIPS mode ispresent underProduct SpecificConfiguration ofCisco DX70registered withCisco UnifiedCommunicationsManager

Verify FIPSmode underProductSpecificConfigurationof DX70

UCJ11.5S.VCS.G.083

PassedNAVerify whether theMouse can beconnected to CiscoDX70 using USBcable and Mouseevent is receivedby Cisco DX70

ConnectMouse toDX70 usingUSB cable

UCJ11.5S.VCS.G.084



PassedNAVerify whethersettings can beaccessed byentering passwordin Cisco DX80registered withCisco UnifiedCommunicationsManager

Accesssettings byenteringpassword inDX80

UCJ11.5S.VCS.G.085

PassedSX10 Quick Set ->Unified CM -> DX80(Viewing Presentation)

Verify whether thepresentation isviewedcontinuously inCisco DX80 whenvideo call fromCisco TelePresenceSX10 Quick Set isanswered in CiscoDX80, both areregistered withCisco UnifiedCommunicationsManager

Stay viewingpresentationafteransweringvideo call inDX80

UCJ11.5S.VCS.G.086

PassedDX80 -> Unified CM ->DX650 -> Call ForwardNo Answer -> UnifiedCM -> DX70

Verify whether callfrom Cisco DX80to Cisco DX650 isforwarded to CiscoDX70 when thereis no answer fromCisco DX650 bothregistered withCisco UnifiedCommunicationsManager workssuccessfully

Call ForwardNoAnswer forDX650 toDX70

UCJ11.5S.VCS.G.091

PassedDX80 -> Unified CM ->DX650

Verify whetherauto answer workssuccessfully inCisco DX650registered withCisco UnifiedCommunicationsManager

Auto Answerin DX650

UCJ11.5S.VCS.G.092



PassedDX70 -> Unified CM ->DX650 -> Hold

Verify whetherhold reversion isworkingsuccessfully inCisco DX650registered withCisco UnifiedCommunicationsManager

Hold reversionin CiscoDX650

UCJ11.5S.VCS.G.095

PassedDX650 -> Unified CM-> SX80 Codec

Verify whether thecall using Speeddial in CiscoDX650 with CiscoTelePresence SX80Codec isestablishedsuccessfully bothare registered withCisco UnifiedCommunicationsManager

Call usingSpeed dial inDX650

UCJ11.5S.VCS.G.096

PassedSX80 Codec -> UnifiedCM -> DX80 andDX650 ->Hold/Resume

Verify whether callwith CiscoTelePresence SX80Codec is put onhold in CiscoDX80 and resumedfrom DX650 whenCisco DX650 andCisco DX80 are inshared line, allregistered withCisco UnifiedCommunicationsManager

Hold/Resumefrom Sharedline of DX650and DX80

UCJ11.5S.VCS.G.097

PassedNAVerify whetherLine 1 and Line 2Directory Numberinformation areavailable in Callpage of CiscoDX650 registeredwith Cisco UnifiedCommunicationsManager

Configure 2lines forDX650 andcheck the lineinformation inCall page

UCJ11.5S.VCS.G.098



PassedDX650 (line 2) ->Unified CM -> DX80

Verify whether thecall is establishedsuccessfullybetween line 2 ofCisco DX650 andCisco DX80 bothare registered withCisco UnifiedCommunicationsManager

Making callfrom line 2 ofDX650 toDX80

UCJ11.5S.VCS.G.099

PassedDX650 -> Unified CM-> DX80

Verify whetheraudio call isestablishedbetween CiscoDX650 and CiscoDX80 when VideoCalling is disabledfor Cisco DX650in Cisco UnifiedCommunicationsManager phonepage

Disable VideoCalling forDX650

UCJ11.5S.VCS.G.100

PassedNAVerify whetherSimple mode ofDevice UI isworkingsuccessfully forCiscoDX650whendevice UI isselected as Simplemode in phonepage in CiscoUnifiedCommunicationsManager

Device UI'Simple Mode'for DX650

UCJ11.5S.VCS.G.101

PassedNAVerify whether anexternal monitor ismirrored withCiscoDX650whenit is connectedusing HDMI outport of CiscoDX650

Mirror mode'using HDMIout port forDX650

UCJ11.5S.VCS.G.102



PassedDX80 -> Unified CM ->DX650DX80 ( transfer ) ->Unified CM ->DX70 ->Cancel Transfer

DX80 -> Unified CM ->DX650 -> Resume

Verify whether calltransfer fromCiscoDX80 to CiscoDX70 is cancelledand Cisco DX80resumes the callwith CiscoDX650,all are registeredwith Cisco UnifiedCommunicationsManager

Cancel transferfrom DX80and resumecall withDX650

UCJ11.5S.VCS.G.103

PassedDX70 -> Unified CM ->EX90

Verify whether theSIP URIs in emailis clickable andinitiate call directlyfrom Cisco DX70registered withCisco UnifiedCommunicationsManager

Clickable SIPURIs tosimplifycallingavailableaddresses inDX70

UCJ11.5S.VCS.G.105

PassedNAVerify whether theuser can usecalculatorapplication inCisco DX80 whenoutgoing call fromCisco DX80 toCisco DX650 isringing bothregistered withCisco UnifiedCommunicationsManager

Use thecalculatorapplication inDX80 Whilean OutgoingCall is Ringing

UCJ11.5S.VCS.G.106

PassedNAVerify whetheraudio frompresentation sourcecan be listened viaspeakers in CiscoDX80

Listen to localPresentationaudio via theDX speakers

UCJ11.5S.VCS.G.107



PassedNAVerify whetherpresentation audiois muted in CiscoDX80 whenansweringincoming call fromCisco TelePresenceSX20 Quick Setboth are registeredwith Cisco UnifiedCommunicationsManager

Presentationaudio is mutedwhenansweringincoming calls

UCJ11.5S.VCS.G.108

PassedDX80 -> Unified CM ->DX70

Verify whethervideo call can bemade from CiscoTelePresenceDX80 withCollaborationEndpoint 8.2software to CiscoDX70 with 10.2.5software bothregistered withCisco UnifiedCommunicationsManager

Make a videocall fromDX80 withCE8.2 load toDX70 with10.2.5 phoneload

UCJ11.5PH2S.VCS.G.001

PassedDX80 -> Unified CM ->SIP Trunk -> CiscoVCS-> DX70 DX80 ->Transfer -> Unified CM-> SIP Trunk -> CiscoVCS -> MX200 G2

Verify whethervideo call fromCisco DX80 with10.2.5 phone loadto CiscoTelePresenceDX70 withCollaborationEndpoint 8.2software registeredwith CiscoTelePresenceVideoCommunicationServer can betransferred to CiscoTelePresenceMX200 G2registered withCisco TelePresenceVideoCommunicationServer

Blind transferfrom DX80with 10.2.5phone load toMX200 G2registered withCisco VCS




PassedDX70 -> Cisco VCS ->DX80

Verify whethervideo call can bemade from CiscoTelePresenceDX70 to CiscoTelePresenceDX80,both withCollaborationEndpoint 8.2software, registeredwith CiscoTelePresenceVideoCommunicationServer

Make a videocall fromDX70 toDX80, bothwith CE8.2phone loadregistered withCisco VCS


PassedDX80 -> Unified CM ->DX70 -> Audio Call

Verify whetheraudio call fromCisco TelePresenceDX80 withCollaborationEndpoint 8.2software to CiscoDX70 with 10.2.5software can bemade successfullywhen both areregistered withCisco UnifiedCommunicationsManager

Audio callfrom DX80with CE 8.2phone load toDX70 with10.2.5 phoneload


PassedDX70 -> Unified CM ->DX80(1)->Call ForwardAll ->Unified CM ->DX80(2)

Verify whethervideo call fromCisco DX70 toCisco TelePresenceDX80(1) withCollaborationEndpoint 8.2software which isset to Call ForwardAll to CiscoTelePresenceDX80(2) with10.2.5 software, allregistered withCisco UnifiedCommunicationsManager workssuccessfully

Call ForwardAll fromDX80(1) withCE 8.2 phoneload toDX80(2) with10.2.5,allregistered withUnified CM




PassedDX70 -> Cisco VCS ->SIP Trunk -> UnifiedCM -> DX80(1)-> CallForward Busy ->Unified CM ->DX80(2)

Verify whethervideo call fromCisco TelePresenceDX70 withCollaborationEndpoint 8.2software registeredwith CiscoTelePresenceVideoCommunicationServer to CiscoTelePresenceDX80(1) withCollaborationEndpoint 8.2software which isset to Call ForwardBusy to CiscoDX80(2) with10.2.5 software,both registeredwith Cisco UnifiedCommunicationsManager

Call ForwardBusy fromDX80(1) withCE 8.2 phoneload toDX80(2) with10.2.5 phoneload


PassedDX80(1) -> Unified CM-> DX80(2) DX80(1) ->Park DX70-> Retrieve-> Unified CM ->DX80(2)

Verify whethervideo call fromCisco TelePresenceDX80(1) withCollaborationEndpoint 8.2software can beparked from CiscoDX80(2) with10.2.5 software andretrievedsuccessfully fromCisco TelePresenceDX70 withCollaborationEndpoint 8.2software, allregistered withCisco UnifiedCommunicationsManager

Call park fromDX80 with10.2.5 phoneload andretrieve fromDX70with CE8.2 phone load




PassedDX80 -> Cisco VCS ->MX200 G2 -> AudioCall

Verify whetheraudio call fromCisco TelePresenceDX80 withCollaborationEndpoint 8.2software to CiscoTelePresenceMX200 G2 can bemade successfullywhen both areregistered withCisco TelePresenceVideoCommunicationServer

Audio callfrom DX80with CE 8.2phone load toMX200 G2,both registeredwith CiscoVCS


PassedDX70 -> Unified CM ->DX80(1) -> CallForwardUnregistered ->Unified CM ->DX80(2)

Verify whethervideo call fromCisco DX70 toCisco TelePresenceDX80(1) withCollaborationEndpoint 8.2software which isset to Call ForwardUnregistered toCisco DX80(2)with 10.2.5software workssuccessfully, whenall are registeredwith Cisco UnifiedCommunicationsManager

Call ForwardUnregisteredfrom DX80(1)with CE 8.2phone load toDX80(2) with10.2.5 phoneload, allregistered withUnified CM




PassedDX70 -> Cisco VCS ->SIP Trunk -> UnifiedCM -> DX80(1)-> CallForward No Answer ->Unified CM ->DX80(2)

Verify whethervideo call fromCisco TelePresenceDX70 withcollaborationEndpoint 8.2software registeredwith CiscoTelePresenceVideoCommunicationServer to CiscoTelePresenceDX80(1) withCollaborationEndpoint 8.2software which isset to Call ForwardNo Answer toCisco DX80(2)with 10.2.5software workssuccessfully, whenboth registeredwith Cisco UnifiedCommunicationsManager

Call ForwardNo Answerfrom DX80(1)with CE 8.2phone load toDX80(2) with10.2.5 phoneload


PassedDX80 -> Unified CM ->MX200 G2 DX70 ->Unified CM -> DX80

Verify whether asecond call fromCisco DX70 with10.2.5 software canbe attended fromCisco TelePresenceDX80 withCollaborationEndpoint 8.2software which isalready in a callwith CiscoTelePresenceMX200 G2, allregistered withCisco UnifiedCommunicationsManager

Attend secondcall in DX80with CE 8.2phone load




PassedDX650(EM user) ->Unified CM -> EX60 ->Call Forward All ->Unified CM -> EX90

Verify whethervideo call fromCiscoDX650whenlogged in asExtensionMobilityuser to CiscoTelePresenceSystem EX60which is set to CallForward All toCisco TelePresenceSystem EX90 allare registered withCisco UnifiedCommunicationsManager

Make callfrom DX650by logging asEM user toEX60which isset to CallForward All toEX90


PassedDX650 -> UnifiedCM-> EX90 DX650 ->Add -> Unified CM ->EX60

Verify whether theAd-hoc conferencecall from CiscoDX650 to CiscoTelePresenceSystem EX90 andCisco TelePresenceSystem EX60 , allregistered in CiscoUnifiedCommunicationsManager

Ad-hocconference callfrom DX650registered withUnified CM


PassedNAVerify whether theuser can view thenew symphony UIin CiscoTelePresence SX10Quick Set OnScreen Displaywhich is registeredwith Cisco UnifiedCommunicationsManager afterupgrading toCollaborationEndpoint Software8.1

Check theSymphony UIof SX10QuickSet OSD afterupgrading toCE 8.1




PassedSX10 Quick Set ->Cisco VCS -> MX200G2

Verify whether theuser can't view theFull Screen audioavatar when wemake an audio callfrom CiscoTelePresence SX10Quick Set to CiscoTelePresenceMX200 G2 bothare registered withCisco TelePresenceVideoCommunicationServer

Ensure FullScreen audioavatar is notviewed whenwe make anaudio call fromSX10 QuickSet to MX200G2 both areregistered withCisco VCS


PassedNAVerify whether theuser can see themouse pointer inCisco TelePresenceSX10 Quick Setregistered withCisco TelePresenceVideoCommunicationServer when thepresentation isshared via CiscoProximity

Check mousepointer is seenin SX10QuickSet registeredwith CiscoVCS whenpresentation isshared viaProximity


PassedSX10 QuickSet(PresentationSharing) -> Unified CM-> MX200 G2

Verify whether thepresentation isautomaticallyshared from CiscoTelePresence SX10Quick Set to CiscoTelePresenceMX200 G2 bothare registered withCisco UnifiedCommunicationsManager

PresentationAuto sharingfrom SX10Quick Set toMX200 G2both registeredwith UnifiedCM




PassedNAVerify whether theuser can view thelocal presentationpreview in CiscoTelePresence SX10Quick Set which isregistered withCisco UnifiedCommunicationsManager afterenabling auto share

LocalPresentationPreview inSX10 QuickSet which isregistered withUnified CMafter enablingauto share


PassedSX10 Quick Set(Hold)-> Cisco VCS -> SipTrunk -> Unified CM ->Jabber for iPhone

Verify whether theuser can hold thecall between CiscoTelePresence SX10Quick Set isregistered withCisco TelePresenceVideoCommunicationServer and CiscoJabber for iPhoneis registered withCisco UnifiedCommunicationsManager

Hold the callbetween SX10Quick Setregistered withCisco VCSand Jabber foriPhoneregistered withUnified CM


PassedSX10 Quick Set(Mute)->Unified CM -> Jabberfor iPhone

Verify whether theuser can mute thecall from CiscoTelePresence SX10Quick Set to CiscoJabber for iPhoneboth are registeredwith Cisco UnifiedCommunicationsManager

Mute the callfrom SX10Quick Set toJabber foriPhone bothare registeredwith UnifiedCM




PassedSX10 Quick Set ->Unified CM -> Jabberfor iPhone -> Add ->Unified CM -> SX20Quick Set

Verify whether theuser can add CiscoTelePresence SX20Quick Set as newparticipant to theexisting call fromCisco TelePresenceSX10 Quick Setwhich is in a callwith Cisco Jabberfor iPhone all areregistered withCisco UnifiedCommunicationsManager

Addingparticipant tothe call fromSX10 QuickSet which isregistered withUnified CM


PassedNAVerify whether anew digital clockappears in theTouch10" of CiscoTelePresence SX20Quick Set

A new digitalclock appearsin Touch10" ofSX20 QuickSet


PassedNAVerify whether thebackground imagein both Touch10"and On ScreenDisplay in CiscoTelePresence SX20Quick Set changesto default mountainview image afterchanging thebackground imageto Auto viawebpage GUI

Backgroundimage haschanged inboth Touch10"and OSD inSX20 QuickSet.


PassedNAVerify whether aMusic player iconis created and it isdisplayed next tothe self-viewbutton in CiscoTelePresence SX20Quick Set

Create acontrolinterface formusic playerand export tocodec in SX20Quick Set,usingIn-RoomControl, .




PassedNAVerify whether theutility icon ischanged for themusic playerinterface in CiscoTelepresence SX20Quick Set.

Changing theutility icon for" musicplayer"interface inSX20 QuickSet In-RoomControl


PassedNAVerify whethersmall icon blinks inthe lower rightcorner and lastactive speaker withvideo is displayedduring an audiocall in CiscoTelePresence SX20Quick Set

A smaller iconblinks in thelower rightcornerindicating theactive audioparticipantduring anaudio call


PassedNAVerify whether theuser can changeActive Controlmode to Auto inCisco TelepresenceSX20 Quick Set

Changing theActiveControlMode to Autoin SX20QuickSet


PassedNAVerify whether adot appears,representing themouse pointer inthe far end CiscoTelePresence SX20Quick Set, when apresentation isshared via Ciscoproximity.

Displays a dotrepresentingthe mousepointer in thefar end whilepresentationsharing


PassedMX200 G2(DirectPresentation Sharing)->Unified CM ->SX20Quick Set

Verify whether,when sharing apresentation withdirect sharingenabled,presentation isshared withoutpressing sharebutton in CiscoTelePresence SX20Quick Set

DirectPresentationsharing toSX20 QuickSet




PassedSX20 Quick Set(Presentation Sharing)->Cisco VCS -> SIPTrunk -> Unified CM ->500-32

Verify whetherpresentation can beshared in aninter-cluster videocall from CiscoTelePresence SX20Quick Setregistered withCisco TelePresenceVideoCommunicationServer to CiscoTelePresenceSystem 500-32registered withCisco UnifiedCommunicationsManager workssuccessfully

Presentationsharing in anInter-clustervideo callbetween SX20Quick Set and500-32


PassedSX20 Quick Set (EMuser)->Unified CM ->MX 300 G2 SX20Quick Set ->Add->Unified CM->500-32

Verify whetherMulti-Siteconference callfrom CiscoTelePresence SX20Quick Set bylogging asExtensionMobilityuser to CiscoTelePresenceMX300 G2 andCisco TelePresenceSystem 500-32, allregistered withCisco UnifiedCommunicationsManager workssuccessfully.

Make aMultisiteconference callfrom SX20Quick Set bylogging as EMuser toMX300G2 and 500-32




PassedSX20 Quick Set (EMuser)(PresentationSharing)->Unified CM- >SIP Trunk ->CiscoVCS -> MX300 G2SX20 Quick Set ->Add->Unified CM ->SipTrunk ->CiscoVCS->EX90

Verify whetherPresentationSharing in anMulti-Siteconference callfrom CiscoTelePresence SX20Quick Set bylogging asExtensionMobilityuser registeredwithCisco UnifiedCommunicationsManager to CiscoTelePresenceMX300 G2 andCisco TelePresenceSystem EX90registered withCisco TelePresenceVideoCommunicationServer, workssuccessfully.

Presentationsharing in aMulti-Siteconference callfrom SX20Quick Set bylogging as EMuser toMX300G2 and EX90


PassedMX300G2(PresentationSharing)(EMuser)->Unified CM->500-32->Hold/Transfer ->Unified CM ->SX20Quick Set

Verify whether thepresentationsharing afterConsultativetransfer to CiscoTelePresence SX20Quick Set bylogging ExtensionMobility user fromCisco TelePresenceMX300 G2 , bothregistered withCisco UnifiedCommunicationsManager workssuccessfully.

Presentationsharing afterConsultativetransfer aVideo call toSX20 QuickSet by loggingas EM user




PassedSX20 Quick Set(PresentationSharing),EX60&500-32-> Unified CM-> Sip Trunk-> MCU5310

Verify whether thepresentationsharing after longtime Meet MeConference usingMCU 5310 fromCisco TelePresenceSX20Quick Set bylogging ExtensionMobility user toCisco TelePresenceSystem 500-32 andCisco TelepresenceSystem EX60, allregistered withCisco UnifiedCommunicationsManager workssuccessfully.

Presentationsharing afterlong timeMeetme conferencein SX20QuickSet via Meetme conferenceusing MCU5310 byloggingExtensionMobility.


PassedNAVerify whether theNew Backgroundimage in CiscoTelePresence SX80Codec on Touch10" pair changes todefault mountainview image afterchanging thebackground imageto auto viawebpage GUI

Check theNewBackgroundImage in SX80Codec onTouch 10" UIfor upgradedCE 8.1.1


PassedNAVerify whether aMusic player icondisplays next to theself-view button inCisco TelePresenceSX80 Codec

UsingIn-RoomControl,Create acontrolinterface forMusic playerand export tocodec in SX80Codec




PassedIntegrator Package C90-> Unified CM ->SX80Codec

Verify whetherDirect contentsharing betweenCisco TelePresenceSystem IntegratorPackage C90 andCisco TelePresenceSX80 Codec bothregistered in CiscoUnifiedCommunicationsManager workssuccessfully

Direct contentsharing tofar-end toSX80 CodecfromIntegratorPackage C90


PassedEX90 -> Unified CM ->SX10 Quick Set ->Transfer -> Unified CM-> SX80 Codec

Verify whether theBlind Transferfrom CiscoTelePresence SX10Quick Set andCisco TelePresenceSX80 Codec bothregistered withCisco UnifiedCommunicationsManager andDirect ContentSharing to far-endin SX80 Codec

Blind Transferfrom SX10Quick Setregistered withUnified CM toSX80 Codecand Directcontentsharing tofar-end inSX80 Codec


PassedSX80 Codec (PresenterTrack )-> Cisco VCS ->SIP Trunk ->UnifiedCM -> MX300 G2

Verify whether thePresenter Trackfeatureenabled,whilemaking a call fromCisco TelePresenceSX80 Codecregistered in CiscoTelePresenceVideoCommunicationServer and CiscoTelepresenceMX300 G2registered in CiscoUnifiedCommunicationsManager workssuccessfully

Make a callfrom SX80Codec toMX300 G2and check thePresenterTrack in SX80Codec




PassedSX80 Codec -> UnifiedCM -> MX300G2->PresentationSharing

Verify whether thePresenter Trackfeature is enabledwhile presentationsharing betweenCisco TelePresenceMX200 G2 andCisco TelepresenceSX80 Codec bothregistered in CiscoUnifiedCommunicationsManager

PresentationsharingbetweenMX200 G2andSX80Codecand check thePresenterTrack in SX80Codec


PassedEX90(Hold)->CiscoVCS->SipTrunk->UnifiedCM->Jabber for iPhone

Verify whether theuser can hold thecall from CiscoTelePresenceSystem EX90which is registeredwith CiscoTelePresenceVideoCommunicationServer to CiscoJabber for iPhonewhich is registeredwith Cisco UnifiedCommunicationsManager

Hold the callin EX90registered withCisco VCS isin call withJabber foriPhone isregistered withUnified CM


PassedDX650 -> Unified CM-> 500-32 EX60( EMuser) ->Unified CM->DX650 -> Call Forwardbusy -> Unified CM ->EX90

Verify whether thecall is forwardedfromCiscoDX650when it is busy toCisco TelePresenceSystem EX90,when call is madefrom CiscoTelePresenceSystem EX60bylogging ExtensionMobility user ,allregistered in CiscoUnifiedCommunicationsManager

Make callfrom EX60 bylogging as EMuser to DX650which is set toCall Forwardbusy to EX90




PassedNAVerify whether thecustom wallpaperis updatedsuccessfully andthe same appears inCisco afterrestarting thedevice .

Upload customwall paper andrestart thephone usingweb GUI inCiscoTelePresenceSystem EX60


PassedNAVerify whether themessage given inthe Sign-in Banneris displayed inCisco TelePresenceSystem EX60Touch UI

Givingmessage inSign-inBannerfrom web GUIand checkingthe same in theEX60 TouchUI


PassedEX90 -> Unified CM ->Integrator Package C90->add call ->Unified CM->MX300 G2 ->Hold/Resume

Verify whether addcall in CiscoTelePresenceSystem IntegratorPackage C90 andHold/Resume callfrom CiscoTelePresenceMX300 G2 bothregistered withCisco UnifiedCommunicationsManager wokssuccessfully

Add call fromIntegraterPackage C90andHold/Resumea call inMX300 G2


PassedMX300 G2 -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> Cisco VCS ->Cisco VCS Expressway-> EX90

Verify whether thevideo call fromCisco TelePresenceMX300 G2 toCisco TelePresenceSystem EX90 bothregistered withCisco UnifiedCommunicationsManager viaCollaboration Edgecan be establishedsuccessfully

Making videocall fromMX300 G2and EX90 bothregistered viaCollaborationEdge




PassedMX300 G2 -> UnifiedCM -> Cisco VCS ->Cisco VCS Expressway-> SX80 Codec ->Hold/T ransfer -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> DX80

Verify whether theconsultative calltransfer fromCiscoTelePresenceMX300 G2registered withCisco UnifiedCommunicationsManager viaCollaboration Edgeto Cisco DX80registered withCisco UnifiedCommunicationsManager workssuccessfully

Consultativecall transferfrom MX300G2 to DX80viaCollaborationEdge


PassedMX200 G2 -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> SX10 Quick SetMX200 G2 -> Add ->Cisco VCS Expressway->CiscoVCS ->UnifiedCM ->EX90(PresentationSharing)

Verify whetherpresentation can beshared successfullyin video conferenceamong CiscoTelePresenceMX200 G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge, CiscoTelePresence SX20Quick Set andCisco TelePresenceSystem EX90 bothregistered withCisco UnifiedCommunicationsManager

SharingPresentation invideoconferenceamongMX200G2 , SX20Quick Set andEX90 viaCollaborationEdge




PassedSX80 Codec -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> DX70 SX80Codec -> Add -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM->EX90->Conference

Verify whether thevideo conferenceamong CiscoTelePresence SX80Codec registeredwith Cisco UnifiedCommunicationsManager viaCollaboration Edge, Cisco DX70 andCisco TelePresenceSystem EX90Codec bothregistered withCisco UnifiedCommunicationsManager workssuccessfully

Making videoconferenceamong SX80Codec, DX70& EX90 viaCollaborationEdge


PassedIX5000 -> Unified CM-> DX80

Verify whethervideo call can bemade from CiscoTelePresenceIX5000 to CiscoTelePresenceDX80 withCollaborationEndpoint 8.2software bothregistered withCisco UnifiedCommunicationsManager

Make a videocall fromIX5000 toDX80with CE8.2 phone loadregistered toUnified CM




PassedIX5000 -> Unified CM-> SIP Trunk -> CiscoVCS -> DX80

Verify whetheraudio call can bemade from CiscoTelePresenceIX5000 registeredwith Cisco UnifiedCommunicationsManager to CiscoTelePresenceDX80 withCollaborationEndpoint 8.2software registeredwith CiscoTelePresenceVideoCommunicationServer

Audio callfrom IX5000to DX80 withCE 8.2 phoneload registeredwith CiscoVCS


PassedIX5000 -> Unified CM->DX70(10.2.5) IX5000-> Add -> Unified CM-> DX70(CE 8.2)

Verify whether acall from CiscoTelePresenceDX70 withCollaborationEndpoint 8.2software can beadded to CiscoTelePresenceIX5000 as a secondcall which isalready in a callwith Cisco DX70with 10.2.5software, allregistered withCisco UnifiedCommunicationsManager

Add anothercall to IX5000which isalready in acall withDX70 with10.2.5 phoneload


PassedNAVerify whetherCisco DX80continues to be inStatic IP modeafter Cisco DX80is upgraded to thelatest version

Static IP modein DX80 afterupgradingfrom one buildto another

UCJ11.5PH2S.DX.SR.002



PassedEX90 -> Cisco VCS ->Sip Trunk -> UnifiedCM -> EX60

Verify whethervideo call can bemade from CiscoTelePresenceSystem EX90registered withCisco TelePresenceVideoCommunicationServer to CiscoTelePresenceSystem EX60registered in CiscoUnifiedCommunicationsManager

Making videocall fromEX90registered inCisco VCS toEX60registered inUnified CM

UCJ11.5PH2S.TC7.SR.002

PassedIntegrator Package C90-> Unified CM -> EX90

Verify whethervideo call can bemade from CiscoTelePresenceSystem IntegratorPackage C90 toCisco TelePresenceSystem EX90 bothregistered in CiscoUnifiedCommunicationsManager

Making videocall fromIntegratorPackage C90to EX90


PassedEX60 -> Cisco VCS->Sip Trunk -> UnifiedCM -> EX90

Verify whethervideo call can bemade from CiscoTelePresenceSystem EX60registered in CiscoTelePresenceVideoCommunicationServer to CiscoTelePresenceSystem EX90registered in CiscoUnifiedCommunicationsManager

Making videocall fromEX60registered inCisco VCS toEX90registered inUnified CM




PassedIntegrator Package C90-> Cisco VCS ->SipTrunk -> Unified CM ->EX60

Verify whethervideo call can bemade from CiscoTelePresenceSystem IntegratorPackage C90registered in CiscoTelePresenceVideoCommunicationServer to CiscoTelePresenceSystem EX60registered in CiscoUnifiedCommunicationsManager

Making videocall fromIntegratorPackage C90registered inCisco VCS toEX60registered inUnified CM


PassedNAVerify whetherTouch 8" logs isgenerated for CiscoTelePresenceSystem EX60 afterupgrading to TC7.3.6 successfully

CheckingTouch Devicelogs afterupgradingEX60 to TC7.3.6


CSCux25293FailedSX80 Codec(Hold/Resume) -> CiscoVCS -> SIP Trunk ->Unified CM -> DX650

Verify whetherHold/Resume avideo call fromCisco TelePresenceSX80 Codecregistered withCisco TelePresenceVideoCommunicationServer to CiscoDX650 registeredwith Cisco UnifiedCommunicationsManager workssuccessfully

Hold/Resumea video callfrom SX80Codecregistered withCisco VCS toDX650registered withUnified CM

UCJ11.5S.VCS.G.109



CSCuz71479FailedDX70(Hold)->VCS->Siptrunk->UnifiedCM->SX10 Quick Set

Verify whether thecall is holdsuccessfully in callparticipant tab ofCisco TelePresenceDX70 which isregistered withCisco TelePresenceVideoCommunicationsServer

Check the callis hold in callparticipant tabof DX70


CSCuz80132FailedMX300-G2 -> UnifiedCM -> DX70

During video callfrom CiscoTelePresenceMX300-G2 withJapanese displayname to CiscoDX70 withJapanese locale,Japanese displayname is notdisplayed in CiscoDX70, bothregistered to CiscoUnifiedCommunicationsManager

CheckJapanesedisplay namein DX70 inJapaneselocale


CSCux51519FailedEX90 -> Unified CM ->DX80

Verify whetherlanguage can bechanged toJapanese for CiscoDX80 while in acall with CiscoTelePresenceSystem EX90 bothregistered withCisco UnifiedCommunicationsManager

Changinglanguage toJapanese inDX80registered withUnified CMwhile in a call

UCJ11.5S.VCS.G.110



CSCuz75359FailedMX200-G2->UnifiedCM->EX90(Mute)&SX10 Quick Set(sharedLine)

Verify whether thecall is mutedsuccessfully inCisco TelePresenceSystem EX90while retrieving thecall from CiscoTelePresence SX10Quick Set all areregistered in CiscoUnifiedCommunicationsManager which isin share line

Check the callis muted inEX90 whileretrieving thefirst line inshare line


CSCuz53989FailedNAVerify whetheruser is able tochange thelanguage in TCSWeb UIsuccessfully

Changelangauge toJapanese inTCS Web UI


CSCuz81984FailedSX10 QuickSet->Unified CM->SipTrunk->MCU 5320

Verify whetherMute Notication isdisplayed in CiscoTelePresence S10Quick Set isregistered withCisco UnifiedCommunicationsManager whilemuting the callfrom Cisco MCU5320 WebInterface

Mutenotification isnot displayedin SX10Quickset


Cisco TelePresence Multipoint Control UnitDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedMCU 5310 -> CiscoVCS -> MX200-G2

Verify whether CiscoTelePresenceMX200-G2 can beadded to a conferenceusing SIP registrar inCisco TelePresenceMCU 5310

AddingMX200-G2 tothe conferenceusing SIPRegistrar

UCJ11.5S.MCU.G.001


Test Results SummaryCisco TelePresence Multipoint Control Unit

PassedMCU 5310 -> CiscoVCS -> SX20Quick Set

Verify whether CiscoTelePresence SX20Quick Set can beadded to a conferenceusing SIP registrar inCisco TelePresenceMCU 5310

Adding SX20Quick Set tothe conferenceusing SIPRegistrar

UCJ11.5S.MCU.G.003

PassedMCU 4510-> CiscoVCS -> MX200-G2


AddingMX200-G2 tothe conferenceusing SIPRegistrar inMCU 4510

UCJ11.5S.MCU.G.004

PassedMCU 5310-> CiscoVCS -> MX300-G2


AddingMX300-G2 tothe conferenceusing SIPRegistrar

UCJ11.5S.MCU.G.005

PassedSX20Quick Set, EX90,MX200-G2 -> CiscoVCS -> MCU 5310 ->Presentation Sharing

Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceMX200-G2 andCisco TelePresenceSystem EX90registered in CiscoTelePresence VideoCommunicationServer can join theMeet Me conferencecall by CiscoTelePresence MCU5310 and share thepresentation fromCisco TelePresenceMX200-G2

Presentationsharing fromMX200-G2 inMeet Meconferenceusing MCU5310

UCJ11.5S.MCU.G.006



PassedSX20Quick Set, EX90,SX80 Codec -> CiscoVCS -> MCU 5310 ->Presentation Sharing

Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceSX80 Codec andCisco TelePresenceSystem EX90registered in CiscoTelePresence VideoCommunicationServer can join theMeet Me conferencecall by CiscoTelePresence MCU5310 and share thepresentation fromCisco TelePresenceSX80 Codec

Presentationsharing fromSX80 Codec inMeet Meconferenceusing MCU5310

UCJ11.5S.MCU.G.007

PassedSX20 Quick Set ,MX200-G2 , EX90 ->Cisco VCS -> MCU4510 -> PresentationSharing

Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceMX200-G2 andCisco TelePresenceSystem EX90registered in CiscoTelePresence VideoCommunicationServer can join theMeet Me conferencecall by CiscoTelePresence MCU4510 and share thepresentation fromCisco TelePresenceSystem EX90

Presentationsharing fromEX90 in MeetMe conferenceusing MCU4510

UCJ11.5S.MCU.G.010



PassedSX20 Quick Set ,MX200-G2, SX10Quick Set -> CiscoVCS-> MCU 4510 ->Presentation Sharing

Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceMX200-G2 andCisco TelePresenceSX10 Quick Setregistered in CiscoTelePresence VideoCommunicationServer can join theMeet Me conferencecall by CiscoTelePresence MCU4510 and share thepresentation fromCisco TelePresenceSX10 Quick Set

Presentationsharing fromSX10 QuickSet inMeetMeconferenceusing MCU4510

UCJ11.5S.MCU.G.011

PassedSX20 Quick Set ,MX200-G2, SX80Codec -> Cisco VCS ->MCU 4510 ->Presentation Sharing

Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceMX200-G2 andCisco TelePresenceSX80 Codecregistered in CiscoTelePresence VideoCommunicationServer can join theMeet Me conferencecall by CiscoTelePresence MCU4510 and share thepresentation fromCisco TelePresenceSX80 Codec

Presentationsharing fromSX80 Codec inMeet Meconferenceusing MCU4510

UCJ11.5S.MCU.G.012



PassedSX20 Quick Set->Unified CM -> SX80Codec SX20 Quick Set-> Add -> Unified CM-> MRGL -> 500-32 ->Hold/Resume

Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceSX80 Codec andCisco TelePresenceSystem 500-32 all areregistered in CiscoUnifiedCommunicationsManager can join theconference call byCisco TelePresenceMCU 5310 and holdand resume theconference call inCisco TelePresenceSystem 500-32

Hold andresume theAdhocconference callusing MCU5310 in 500-32

UCJ11.5PH2S.MCU.G.001

PassedSX20 Quick Set ->Unified CM -> SX80Codec SX20 Quick Set-> Add -> Unified CM-> MRGL -> 500-32 ->Presentation Sharing

Verify whether theCisco TelePresenceSX20 Quick Set,Cisco TelePresenceSystem 500-32 andCisco TelePresenceSX80 Codec all areregistered in CiscoUnifiedCommunicationsManager can join theconference call byCisco TelePresenceMCU 5310 and sharethe presentation fromCisco TelePresenceSystem 500-32

Presentationsharing from500-32 inadhocconference callusing MCU5310


PassedSX20 Quickset,SX10Quick Set & DX650 ->Unified CM -> SipTrunk -> MCU 5310->Video Conference

Verify whetherjoining a Meet Meconference fromCisco TelePresenceSX20 Quick Set,Cisco TelePresenceSX10 Quick Set &Cisco DX650registered CiscoUnifiedCommunicationsManager to CiscoTelePresence MCU5310

Initiate theMeet me videoconferencefrom SX20Quick Setusing MCU5310




Passed500-32,DX650&DX80-> Unified CM -> SipTrunk -> MCU 5310 ->Video Conference

Verify whetherjoining a Meet Meconference fromCisco TelePresenceSystem 500-32, CiscoDX650 & CiscoDX80 registered withCisco UnifiedCommunicationsManager to CiscoTelePresence MCU5310

Initiate theMeet me videoconferencefrom 500-32using MCU5310


PassedSX20 Quick Set,SX10Quick Set & DX650->Unified CM -> SipTrunk -> MCU 5310

Verify Japanesemessage can be sentto all participants ina conference fromCisco TelePresenceMCU 5310

SendingJapanesemessage tousers while inconferencefrom MCU5310


PassedSX20 Quick Set ->Unified CM -> SX80Codec SX20 Quick Set-> Add -> Unified CM-> MRGL -> MCU5310 -> IntegratorPackage C90 ->Presentation Sharing

Verify whether theCisco TelePresenceSX20 Quick Set,Cisco TelePresenceSystem IntegratorPackage C90 andCisco TelePresenceSX80 Codec all areregistered in CiscoUnifiedCommunicationsManager can join theconference call byCisco TelePresenceMCU 5310 andsharing thepresentation fromCisco TelePresenceSystem IntegratorPackage C90

Presentationsharing fromIntegratorPackageC90 inAdhocconference callusing MCU5310




PassedSX20 Quick Set->Unified CM -> SX80Codec SX20 Quick Set-> Add -> Unified CM-> MRGL -> MCU5310-> IntegratorPackage C90->Hold/Resume

Verify whether theCisco TelePresenceSX20 Quick Set,Cisco TelePresenceSX80 Codec andCisco TelePresenceSystem IntegratorPackage C90registered in CiscoUnifiedCommunicationsManager can join theconference call byCisco TelePresenceMCU 5310 andhold/resume theconference call inCisco TelePresenceSystem IntegratorPackage C90

Hold andresume theadhocconference callusing MCU5310 inIntegratorPackage C90


PassedMX300 G2 & MX200G2 -> Unified CM ->Sip Trunk -> MCU5320

Verify whether theMeet me Conferenceis initiatedsuccessfully fromCisco TelePresenceMX300 G2 & CiscoTelePresenceMX200G2 both registeredwith Cisco UnifiedCommunicationsManager using CiscoTelePresence MCU5320

Initiate Meetme Conferencefrom MX300G2 & MX200G2 usingMCU5320


PassedSX80 Codec,SX10Quick Set and MX300G2 -> Unified CM ->Sip Trunk -> MCU5320

Verify whether theMeet me Conferenceis initiatedsuccessfully fromCisco TelePresenceSX80 Codec ,CiscoTelePresence SX10Quick Set and CiscoTelePresenceMX300G2 all registered withCisco UnifiedCommunicationsManager using CiscoTelePresence MCU5320

Initiate theMeet meConferencefrom SX80Codec, SX10Quick Set andMX300 G2using MCU5320




PassedSX20 Quick Set,SX10Quick Set & DX650 ->Unified CM -> SipTrunk -> MCU 5320

Verify Japanesemessage can be sentto all participants ina conference fromCisco TelePresenceMCU 5320

SendingJapanesemessage tousers while inconferenceusing MCU5320


PassedSX80 Codec & DX80-> Unified CM -> SipTrunk -> MCU 5320

Verify whether Meetme Conference isinitiated successfullyfrom CiscoTelePresence SX80Codec and CiscoDX80 both areregistered with CiscoUnifiedCommunicationsManager using CiscoTelePresence MCU5320

Initiate theMeet meConferencefrom SX80Codec usingMCU 5320


PassedIntegrator Package C90& DX650->UnifiedCM->SipTrunk->MCU5320

Verify whether Meetme Conference isinitiated successfullyfrom CiscoTelePresenceIntegrator PackageC90 and CiscoDX650 both areregistered with CiscoUnifiedCommunicationsManager using CiscoTelePresence MCU5320

Initiate theMeet meConferencefrom IntegratorPackage C90using MCU5320


PassedEX60(Hold AndResume)->UnifiedCM->SipTrunk->MCU5320

Verify whether Holdand resume the Meetme Conference fromCisco TelePresenceSystem EX60 whichis registered withCisco UnifiedCommunicationsManager workssuccessfully usingCisco TelePresenceMCU 5320

Hold andresume theMeet meConferencefrom EX60using MCU5320




PassedSX20 Quick Set->Unified CM -> SX80Codec SX20 Quick Set-> Add -> Unified CM->MRGL->MCU 5320-> MX300 G2 ->Hold/Resume

Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceSX80 Codec andCisco TelePresenceMX300 G2 all areregistered in CiscoUnifiedCommunicationsManager can join theconference call usingCisco TelePresenceMCU 5320 and Holdand resume theconference call inCisco TelePresenceMX300 G2

Hold andresume theAdhocConferencecall usingMCU 5320 inMX300 G2


PassedSX20 Quick Set ->Unified CM -> SX80Codec SX20 Quick Set-> Add -> Unified CM-> SX20 QuickSet(Hold and Resume)->UnifiedCM->MRGL-> MCU 5320 -> SX20Quick Set ->Hold/Resume

Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceSX80 Codec andCisco TelePresenceSX20 Quick Set allare registered withCisco UnifiedCommunicationsManager can join theconference call usingCisco TelePresenceMCU 5320 and Holdand resume theconference call inCisco TelePresenceSX20 Quick Set

Hold andresume theAdhocConferencecall usingMCU 5320 inSX20 QuickSet


Cisco TelePresence Management SuiteDefectsStatusCall Component FlowDescriptionTitleLogical ID


Test Results SummaryCisco TelePresence Management Suite

PassedNAVerify whether thesystem upgrade toCE8.0 software forCiscoTelePresenceMX200-G2 havingJapanese systemname anddescription workssuccessfully inCiscoTelePresenceManagement Suite

System upgradeof MX200-G2to CE8.0 havingJapanese SystemName anddescription

UCJ11.5S.TMS.G.001

PassedNAVerify whetherbackup can betaken for CiscoTelePresenceSX80 Codechaving Japanesesystem name inCiscoTelePresenceManagement Suite

Backup forSX80 Codechaving Japanesename usingCisco TMS

UCJ11.5S.TMS.G.002

PassedNAVerify whetherrestore can betaken for CiscoTelePresenceSX80 Codechaving Japanesesystem name inCiscoTelePresenceManagement Suite

Restore forSX80 Codechaving Japanesename usingCisco TMS

UCJ11.5S.TMS.G.003

PassedNAVerify whethernon-defaultcredentials can beused while probingand adding CiscoTelePresenceSX80 Codec inCiscoTelePresenceManagement Suite

Non-defaultcredentials forSX80 Codecwhile adding inCisco TMS

UCJ11.5S.TMS.G.004



PassedNAVerify whetheradmin password ofCiscoTelePresenceSX80 Codec canbe changed inCiscoTelePresenceManagement Suite

Change AdminPassword ofSX80 Codec inCisco TMS

UCJ11.5S.TMS.G.005

PassedNAVerify whetherSystem name ofCiscoTelePresenceSX10 Quick Setcan be changed inCiscoTelePresenceManagement Suite

Change SystemName of SX10Quick Set inCisco TMS

UCJ11.5S.TMS.G.006

PassedCisco TMS -> Conductor-> Cisco TS on VM ->CiscoVCS ->MX300-G2-> MX200-G2 -> SX20Quick Set

Verify whether ascheduledconferenceparticipant (CiscoTelePresenceMX300-G2) canbe removed fromConferenceControl Centerduring a scheduledconference inCiscoTelePresenceManagement Suite

Remove aparticipant fromConferenceControl Centerduring ascheduledconference

UCJ11.5S.TMS.G.007

PassedNAVerify whetherXMLConfigurationtemplate can beadded for CiscoTelePresenceMX300-G2 inCE8.0 in CiscoTelePresenceManagement SuiteProvisioningExtension

AddconfigurationXML Templateof MX300-G2in CiscoTMSPE

UCJ11.5S.TMS.G.008



PassedNAVerify whetherXMLConfigurationtemplate can beadded for CiscoTelePresenceSX10 Codec inCE8.0 in CiscoTelePresenceManagement SuiteProvisioningExtension

AddconfigurationXML Templateof SX80 Codecin CiscoTMSPE

UCJ11.5S.TMS.G.010

PassedCisco TMS->CiscoVCS->Peer TelePresenceConductor ->MCU4510->MX200 G2,MX300 G2, SX20 QuickSet

Verify that user isable to Schedulethe conferencebetween CiscoTelePresenceMX200 G2, CiscoTelePresenceMX300 G2 &CiscoTelePresenceSX20 Quick Setregistered withCiscoTelePresenceVideoCommunicationServer using CiscoTelePresenceMCU 4510 viaPeer CiscoTelePresenceConductor after theprimaryTelePresenceConductor goesdown

Scheduled videoconferencebetweenMX200G2, MX300 G2& SX20 QuickSet registered toCisco VCSUsing MCU4510 via peerCiscoTelePresenceConductor afterPrimaryTelePresenceConductor goesdown

UCJ11.5PH2S.TMS.G.001



PassedCisco TMS->CiscoVCS->Peer TelePresenceConductor ->MCU5310->MX200 G2,MX300 G2, SX20 QuickSet

Scheduled videoconferencebetween CiscoTelePresenceMX200 G2, CiscoTelePresenceMX300 G2 &CiscoTelePresenceSX20 Quick Setregistered to CiscoTelePresenceVideoCommunicationServerUsingCiscoTelePresenceMCU 5310 viapeer CiscoTelePresenceConductor afterPrimaryTelePresenceConductor goesdown

Scheduled videoconferencebetweenMX200G2, MX300 G2& SX20 QuickSet registered toCisco VCSUsing MCU5310 via peerCiscoTelePresenceConductor afterPrimaryTelePresenceConductor goesdown


PassedCisco TMS->CiscoVCS->Peer TelePresenceConductor ->Cisco TS onVM->MX200 G2,MX300 G2, SX20 QuickSet

Verify that user isable to Schedulethe conferencebetween CiscoTelePresenceMX200 G2, CiscoTelePresenceMX300 G2 &CiscoTelePresenceSX20 Quick Setregistered withCiscoTelePresenceVideoCommunicationServer using CiscoTelePresenceServer on VM viaPeer CiscoTelePresenceConductor after theprimaryTelePresenceConductor goesdown

Scheduled videoconferencebetweenMX200G2, MX300 G2& SX20 QuickSet registered toCisco VCSUsing Cisco TSon VM via peerTelePresenceConductor afterPrimaryTelePresenceConductor goesdown




PassedCisco TMS->CiscoVCS->Peer TelePresenceConductor ->Cisco TS7010->MX200 G2,MX300 G2, SX20 QuickSet

Scheduled videoconferencebetween CiscoTelePresenceMX200 G2, CiscoTelePresenceMX300 G2 &CiscoTelePresenceSX20 Quick Setregistered to CiscoTelePresenceVideoCommunicationServerUsingCiscoTS 7010 via peerCiscoTelePresenceConductor afterPrimaryTelePresenceConductor goesdown

Scheduled videoconferencebetweenMX200G2, MX300 G2& SX20 QuickSet registered toCisco VCSUsing Cisco TSon 7010 via peerCiscoTelePresenceConductor afterPrimaryTelePresenceConductor goesdown


PassedCisco TMS->UnifiedCM->Peer TelePresenceConductor ->MCU5310->MX200 G2,MX300 G2, SX20 QuickSet

Verify that user isable to Schedulethe conferencebetween CiscoTelePresenceMX200 G2, CiscoTelePresenceMX300 G2 &CiscoTelePresenceSX20 Quick Setregistered withCisco UnifiedCommunicationsManager usingCisco MCU 5310via Peer CiscoTelePresenceConductor after theprimaryTelePresenceConductor goesdown

Scheduled videoconferencebetweenMX200G2, MX300 G2& SX20 QuickSet registered toUnified CMUsing MCU5310 via peerCiscoTelePresenceConductor afterPrimaryTelePresenceConductor goesdown




PassedCisco TMS->UnifiedCM->2nd PeerTelePresence Conductor->Cisco TS7010->MX200 G2,MX300 G2, SX20 QuickSet

Verify that user isable to Schedulethe conferencebetween CiscoTelePresenceMX200 G2, CiscoTelePresenceMX300 G2 &CiscoTelePresenceSX20 Quick Setregistered withCisco UnifiedCommunicationsManager usingCiscoTelePresenceServer 7010 via2nd Peer CiscoTelePresenceConductor after theprimary CiscoTelePresenceConductor and 1stpeer CiscoTelePresenceConductor goesdown

Scheduled videoconferencebetweenMX200G2, MX300 G2& SX20 QuickSet registered toUnified CMUsing Cisco TS7010 via 2ndpeerTelePresenceConductor afterPrimaryTelePresenceConductor and1st peerTelePresenceConductor goesdown


PassedNAVerify whetherCiscoTelePresenceDX70 runningCE8.2 phone loadcan be added andprovisioned viaCiscoTelePresenceManagement Suite

Add DX70 withCE8.2 to CiscoTMS


PassedNAVerify whetherCiscoTelePresenceManagement Suitecan be installed inESXi 6.0successfully

Install CiscoTMS in ESXi6.0




Cisco TelePresence ConductorDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedEX90 -> Unified CM ->Conductor ->Cisco TS 7010-> Full HD MeetingConferenceSX20 Quick Set -> UnifiedCM -> Conductor -> CiscoTS 7010 -> Full HDMeeting Conference ->Presentation Sharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceSX20 QuickSet(user) assignedwith PMPLicenseregistered in CiscoUnifiedCommunicationsManager afterjoining a Full HDMeetingconferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor

Presentationsharing fromSX20 QuickSet (user)assignedwithPMP Licensewhen joininga Full HDMeetingConferencemanaged byCisco TS7010 inConductor

UCJ11.5S.TC.G.001

PassedEX90 -> Unified CM ->Conductor ->Cisco TS 7010-> Full HD LectureConferenceMX200-G2 -> Unified CM-> Conductor -> Cisco TS7010 -> Full HD LectureConference -> PresentationSharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceMX200-G2(user)assigned withPMP Licenseregistered in CiscoUnifiedCommunicationsManager afterjoining a Full HDLectureconferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor

Presentationsharing fromMX200-G2(user)assignedwithPMP Licensewhen joininga Full HDLectureConferencemanaged byCisco TS7010 inConductor

UCJ11.5S.TC.G.003


Test Results SummaryCisco TelePresence Conductor

PassedDX70 -> Unified CM ->Conductor -> TelePresenceServer on VM -> Full HDLecture ConferenceMX300-G2 -> Unified CM-> Conductor ->TelePresence Server on VM-> Full HD LectureConference -> PresentationSharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceMX300-G2(user)assigned withPMP Licenseregistered in CiscoUnifiedCommunicationsManager afterjoining a Full HDLectureconferencemanaged byCiscoTelePresenceServer on VM inCiscoTelePresenceConductor

Presentationsharing fromMX300-G2(user)assignedwithPMP Licensewhen joininga Full HDLectureConferencemanaged byTelePresenceServer onVM inConductor

UCJ11.5S.TC.G.004

PassedEX90 -> Unified CM ->Conductor ->Cisco TS 7010-> Full HD MeetingConferenceMX300-G2 -> Unified CM-> Conductor -> Cisco TS7010 -> Full HD MeetingConference -> PresentationSharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceMX300-G2(user)assigned withSMP Licenseregistered in CiscoUnifiedCommunicationsManager afterjoining a Full HDMeetingconferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor

Presentationsharing fromMX300-G2(user)assignedwithSMP Licensewhen joininga Full HDMeetingConferencemanaged byCisco TS7010 inConductor

UCJ11.5S.TC.G.005



PassedDX80 -> Unified CM ->Conductor -> TelePresenceServer on VM -> Full HDMeeting ConferenceMX200-G2 -> Unified CM-> Conductor ->TelePresence Server on VM-> Full HD MeetingConference -> PresentationSharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceMX200-G2(user)assigned withSMP Licenseregistered in CiscoUnifiedCommunicationsManager afterjoining a Full HDMeetingconferencemanaged byCiscoTelePresenceServer on VM inCiscoTelePresenceConductor

Presentationsharing fromMX200-G2(user)assignedwithSMP Licensewhen joininga Full HDMeetingConferencemanaged byTelePresenceServer onVM inConductor

UCJ11.5S.TC.G.006

PassedDX70 -> Unified CM ->Conductor -> TelePresenceServer on VM -> Full HDLecture ConferenceMX300-G2 -> Unified CM-> Conductor ->TelePresence Server on VM-> Full HD LectureConference -> PresentationSharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceMX300-G2(user)assigned withSMP Licenseregistered in CiscoUnifiedCommunicationsManager afterjoining a Full HDLectureconferencemanaged byCiscoTelePresenceServer on VM inCiscoTelePresenceConductor

Presentationsharing fromMX300-G2(user)assignedwithSMP Licensewhen joininga Full HDLectureConferencemanaged byTelePresenceServer onVM inConductor

UCJ11.5S.TC.G.008



PassedEX90 -> Unified CM ->Conductor -> TelePresenceServer on VM -> HDMeeting ConferenceSX10 Quick Set -> UnifiedCM -> Conductor ->TelePresence Server on VM-> HD Meeting Conference-> Presentation Sharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceSX10 QuickSet(user) assignedwith PMPLicenseregistered in CiscoUnifiedCommunicationsManager afterjoining a HDMeetingconferencemanaged byCiscoTelePresenceServer on VM inCiscoTelePresenceConductor

Presentationsharing fromSX10 QuickSet(user)assignedwithPMP Licensewhen joininga HDMeetingConferencemanaged byTelePresenceServer onVM inConductor

UCJ11.5S.TC.G.010

PassedEX90 -> Unified CM ->Conductor ->Cisco TS 7010-> HD Lecture ConferenceMX200-G2 -> Unified CM-> Conductor -> Cisco TS7010 -> HD LectureConference -> PresentationSharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceMX200-G2(user)assigned withPMP Licenseregistered in CiscoUnifiedCommunicationsManager afterjoining a HDLectureconferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor

Presentationsharing fromMX200-G2(user)assignedwithPMP Licensewhen joininga HD LectureConferencemanaged byCisco TS7010 inConductor

UCJ11.5S.TC.G.011



PassedEX90 -> Unified CM ->Conductor ->Cisco TS 7010-> HD Meeting ConferenceMX300-G2 -> Unified CM-> Conductor -> Cisco TS7010 -> HD MeetingConference -> PresentationSharing

Verify whetherpresentation canbe shared fromCiscoTelePresenceMX300-G2(user)assigned withSMP Licenseregistered in CiscoUnifiedCommunicationsManager afterjoining a HDMeetingconferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor

Presentationsharing fromMX300-G2(user)assignedwithSMP Licensewhen joininga HDMeetingConferencemanaged byCisco TS7010 inConductor

UCJ11.5S.TC.G.013

PassedEX60 -> Cisco VCS ->Conductor ->Cisco TS 7010->CMRmeeting conferenceEX90 -> Cisco VCS ->Conductor ->Cisco TS 7010->CMRmeeting conference

Verify whetherStart time of theconference for theendpointsregistered withCiscoTelePresenceVideoCommunicationServer isdisplayed inActive MeetingManager usingCiscoTelePresenceManagementSuite ProvisioningExtensionintegrated withCiscoTelePresenceConductormanaged byCiscoTelePresenceServer 7010

Checking theStart time oftheconferencefrom ActiveMeetingManagerusingTMSPE withConductor

UCJ11.5S.TC.G.014




Verify whethermuting aparticipant in aconferenceregistered withCiscoTelePresenceVideoCommunicationServer fromActive MeetingManager usingCiscoTelePresenceManagementSuite ProvisioningExtensionintegrated withCiscoTelePresenceConductormanaged byCiscoTelePresenceServer 7010

Muting aparticipant ina conferencefrom ActiveMeetingManagerusingTMSPE withConductor

UCJ11.5S.TC.G.015


Verify whetherunmuting aparticipant whichis placed in mutein a conferenceregistered withCiscoTelePresenceVideoCommunicationServer fromActive MeetingManager usingCiscoTelePresenceManagementSuite ProvisioningExtensionintegrated withCiscoTelePresenceConductormanaged byCiscoTelePresenceServer 7010

Unmuting aparticipant oftheconferencefrom ActiveMeetingManagerusingTMSPE withConductor

UCJ11.5S.TC.G.016




Verify whethermuting all theparticipants in theconferenceregistered withCiscoTelePresenceVideoCommunicationServer fromActive MeetingManager usingCiscoTelePresenceManagementSuite ProvisioningExtensionintegrated withCiscoTelePresenceConductormanaged byCiscoTelePresenceServer 7010

Muting alltheparticipantsin theconferencefrom ActiveMeetingManagerusingTMSPE withConductor

UCJ11.5S.TC.G.017

PassedNAVerify whethernew page underConferenceConfiguration ->Global settings inadded in CiscoTelePresenceConductor afterupgrading toXC4.1

New pageunderConferenceConfigurationin Conductor

UCJ11.5S.TC.G.019

PassedNAVerify whetherusage report canbe downloaded inCiscoTelePresenceConductor

Usage ReportCollection inConductor

UCJ11.5S.TC.G.020



PassedNAVerify whetherCiscoTelePresenceConductor can beintegrated withCiscoTelePresenceManagementSuite ProvisioningExtension version1.6 installed withJava 8 platform

IntegratingTelePresenceConductorwith TMSPEversion 1.6installed withJava 8platform

UCJ11.5PH2S.TC.G.001

PassedNAVerify whetherJapanese localecan be selected fora conferenceunder ConferenceConfiguration ->ConferenceLocalization inCiscoTelePresenceConductor

Selection ofLocale forConferenceunderConferenceLocalizationinTelePresenceConductor


PassedSX10 Quick Set -> UnifiedCM -> TelePresenceConductor ->Cisco TS 7010-> Meeting Conference

Verify whetherJapaneseMessageindicationdisplayed in CiscoTelePresenceSX10 Quick Setwhen it joins aMeetingConferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor havingJapanese locale

JapaneseMessageindication inSX10 QuickSet afterjoining aMeetingConferencemanaged byCisco TS7010 whenJapaneselocale isselected inTelePresenceConductor





Verify whetherJapanese AudioPrompt is heardfrom CiscoTelePresenceSX20 Quick Setwhen it joins aMeetingConferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor havingJapanese locale

JapaneseAudioPrompt inSX20 QuickSet afterjoining aMeetingConferencemanaged byCisco TS7010 whenJapaneselocale isselected inTelePresenceConductor



Verify whethercustom messagedisplays inEnglish in CiscoTelePresenceSX10 Quick Setwhen it joins aMeetingConferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor havingJapanese locale

AdvancedParametersoverridesGlobalParameterSettings inTelePresenceConductor


PassedMX200 G2 -> Unified CM-> TelePresence Conductor-> Cisco TS on VM ->Meeting Conference

Verify whetherMeetingConferencemanaged byCiscoTelePresenceServer on VMtakes place withTemporaryMultipartyLicense installedin CiscoTelePresenceConductor

MeetingConferencewithTemporaryMulti-Partylicenseinstalled inTelePresenceConductormanaged byCisco TS onVM




PassedMX300 G2 -> Unified CM-> TelePresence Conductor-> Cisco TS 7010 ->Meeting Conference

Verify whether noalarms is raised ina MeetingConference takingplace withTemporaryMultipartyLicense installedin CiscoTelePresenceConductormanaged byCiscoTelePresenceServer 7010

No Alarmsraised in aMeetingConferencetaking placewithTemporaryMultipartylicenseinstalled inTelePresenceConductormanaged byCisco TS7010


PassedMX300 G2 -> Unified CM-> TelePresence Conductor-> Cisco TS on VM -> FullHD Lecture Conference

Verify whetherFull HD LectureConferencemanaged byCiscoTelePresenceServer on VMtakes place withTemporaryMultipartyLicense installedin CiscoTelePresenceConductor

Full HDLectureConferencewithTemporaryMulti-Partylicenseinstalled inTelePresenceConductormanaged byCisco TS onVM


PassedMX200 G2 -> Unified CM-> TelePresence Conductor-> TelePresence Server onVM -> HD LectureConference

Verify whetherHD LectureConferencemanaged byCiscoTelePresenceServer on VMtakes place withTemporaryMultipartyLicense installedin CiscoTelePresenceConductor

HD LectureConferencewithTemporaryMulti-Partylicenseinstalled inTelePresenceConductormanaged byCisco TS onVM





Verify whetherOut ofComplianceBanner isdisplayed in CiscoTelePresenceSX10 Quick SetOSD while theTemporaryMultiparty licenseexpires in CiscoTelePresenceConductor in aMeetingConference

Out ofComplianceBannerdisplays inSX10 QuickSet OSDwhen theTemporaryMultipartyLicenseexpires inTelePresenceConductorfor a MeetingConference


PassedMX200 G2 -> Unified CM-> TelePresence Conductor-> Cisco TS 7010 ->Meeting Conference

Verify whetherOut ofComplianceBanner isdisplayed for 1minute in CiscoTelePresenceMX200 G2 OSDwhile theTemporaryMultiparty licenseexpires in CiscoTelePresenceConductor in aMeetingConference

Out ofComplianceBannerdisplays for 1minute inMX200 G2OSD whentheTemporaryMultipartyLicenseexpires inTelePresenceConductorfor a MeetingConference


Cisco TelePresence ServerDefectsStatusCall Component



Test Results SummaryCisco TelePresence Server

PassedSX80 Codec, SX10Quick Set and DX70-> Unified CM ->SIP Trunk -> CiscoTS 7010

Verify whetherlong duration MeetMe conferenceamong CiscoTelePresence SX80Codec, CiscoTelePresence SX10Quick Set andCisco DX70 usingCisco TelePresenceServer 7010 workssuccessfully,endpoints areregistered withCisco UnifiedCommunicationsManager

Long durationMeet Meconferenceamong SX80Codec, SX10Quick Set andDX70 usingCisco TS7010, all areregisteredwith UnifiedCM

UCJ11.5S.TS.G.001

PassedSX80 Codec, SX10Quick Set and DX70-> Unified CM ->SIP Trunk ->Conductor -> CiscoTS 7010

Verify whetherlong duration MeetMe conferenceamong CiscoTelePresence SX80Codec, CiscoTelePresence SX10Quick Set andCisco DX70 usingCisco TelePresenceServer 7010managed by CiscoTelePresenceConductor workssuccessfully,endpoints areregistered withCisco UnifiedCommunicationsManager

Long durationMeet Meconferenceamong SX80Codec, SX10Quick Set andDX70 usingTS 7010managed byConductor,endpoints areregisteredwith UnifiedCM

UCJ11.5S.TS.G.002



PassedSX80 Codec, SX10Quick Set and DX70-> Unified CM ->SIP Trunk ->Conductor -> CiscoTS on VM

Verify whetherlong duration MeetMe conferenceamong CiscoTelePresence SX80Codec, CiscoTelePresence SX10Quick Set andCisco DX70 usingCisco TelePresenceServer on VMmanaged by CiscoTelePresenceConductor workssuccessfully,endpoints areregistered withCisco UnifiedCommunicationsManager

Long durationMeet Meconferenceamong SX80Codec, SX10Quick Set andDX70 usingCisco TS onVM managedby Conductor,endpoints areregisteredwith UnifiedCM

UCJ11.5S.TS.G.003

PassedSX80 Codec, SX10Quick Set andMX200-G2 (SIP) ->Cisco VCS -> CiscoTS 7010

Verify whetherlong duration MeetMe conferenceamong CiscoTelePresence SX80Codec, CiscoTelePresence SX10Quick Set andCisco TelePresenceMX200-G2 usingCisco TelePresenceServer 7010 workssuccessfully,endpoints areregistered withCisco TelePresenceVideoCommunicationServer as SIPendpoints

Long durationMeet Meconferenceamong SX80Codec, SX10Quick Set andMX200-G2using CiscoTS 7010,endpoints areregisteredwith CiscoVCS as SIPendpoints

UCJ11.5S.TS.G.004



PassedSX80 Codec, SX20Quick Set andMX200-G2 (H323)-> Cisco VCS ->Cisco TS 7010

Verify whetherlong duration MeetMe conferenceamong CiscoTelePresence SX80Codec, CiscoTelePresence SX20Quick Set andCisco TelePresenceMX200-G2 usingCisco TelePresenceServer 7010 workssuccessfully,endpoints areregistered withCisco TelePresenceVideoCommunicationServer as H323endpoints

Long durationMeet Meconferenceamong SX80Codec, SX20Quick Set andMX200-G2using CiscoTS 7010,endpoints areregisteredwith CiscoVCS as H323endpoints

UCJ11.5S.TS.G.005

PassedSX80 Codec, SX10Quick Set and DX70-> Unified CM ->SIP Trunk ->Conductor -> CiscoTS 7010 ->Presentation Sharing

Verify whetherlong duration MeetMe conferencewith presentationsharing amongCisco TelePresenceSX80Codec, CiscoTelePresence SX10Quick Set andCisco DX70 usingCisco TelePresenceServer 7010managed by CiscoTelePresenceConductor workssuccessfully,endpoints areregistered withCisco UnifiedCommunicationsManager

Long durationMeet Meconferencewithpresentationsharing amongSX80 Codec,SX10 QuickSet and DX70using CiscoTS 7010managed byConductor,endpoints areregisteredwith UnifiedCM

UCJ11.5S.TS.G.007



PassedSX80 Codec, SX10Quick Set and DX70-> Unified CM ->SIP Trunk ->Conductor -> CiscoTS on VM ->Presentation Sharing

Verify whetherlong duration MeetMe conferencewith presentationsharing amongCisco TelePresenceSX80Codec, CiscoTelePresence SX10Quick Set andCisco DX70 usingCisco TelePresenceServer on VMmanaged by CiscoTelePresenceConductor workssuccessfully,endpoints areregistered withCisco UnifiedCommunicationsManager

Long durationMeet Meconferencewithpresentationsharing amongSX80 Codec,SX10 QuickSet and DX70using CiscoTS on VMmanaged byConductor,endpoints areregisteredwith UnifiedCM

UCJ11.5S.TS.G.008

PassedSX80 Codec, SX10Quick Set andMX200-G2 (H323)-> Cisco VCS ->Cisco TS 7010 ->Presentation Sharing

Verify whetherlong duration MeetMe conferencewith presentationsharing amongCisco TelePresenceSX80Codec, CiscoTelePresence SX20Quick Set andCisco TelePresenceMX200-G2 usingCisco TelePresenceServer 7010 workssuccessfully,endpoints areregistered withCisco TelePresenceVideoCommunicationServer as H323endpoints

Long durationMeet Meconferencewithpresentationsharing amongSX80 Codec,SX20 QuickSet andMX200-G2using CiscoTS 7010,endpoints areregisteredwith CiscoVCS as H323endpoints

UCJ11.5S.TS.G.010



PassedSX80 Codec, SX10Quick Set &MX200-G2 ->Unified CM -> SIPTrunk -> Cisco TS7010 -> Disconnect( SX80 Codec )

Verify whether theuser is able isdisconnect CiscoTelePresence SX80Codec which is inMeet meconference withCisco TelePresenceSX10 Quick Setand CiscoTelePresenceMX200-G2 usingCisco TelePresenceServer 7010 WebUI , endpoints areregistered withCisco UnifiedCommunicationsManager

DisconnectSX80 CodecfromMeetMeconferenceusing CiscoTS 7010 WebUI

UCJ11.5S.TS.G.011

PassedSX10 Quick Set &MX200-G2 ->Unified CM -> SIPTrunk -> Cisco TS7010 -> call -> SX80Codec

Verify whether theuser is able is callCisco TelePresenceSX80 Codec forMeet Meconference fromCisco TelePresenceServer 7010, andCisco TelePresenceSX80 Codec joinsthe conferencesuccessfully ,endpoints areregistered withCisco UnifiedCommunicationsManager

Call SX80Codec forMeet MeconferencefromCisco TS7010

UCJ11.5S.TS.G.012

PassedSX10 Quick Set,MX200-G2 &DX80-> Unified CM ->SIP Trunk -> CiscoTS 7010

Verify whetheruser is able to sendmessage to CiscoDX80 from CiscoTelePresenceServer 7010 duringconference andendpoints inconference areregistered withCisco UnifiedCommunicationsManager

Send messageto DX80 fromCisco TS7010 duringconference

UCJ11.5S.TS.G.013



PassedSX80 Codec, SX10Quick Set and DX70-> Unified CM ->SIP Trunk -> CiscoTS 7010 ->Hold\Resume

Verify whetherHold/Resume inCisco TelePresenceSX80Codec duringlong duration MeetMe conferencewith CiscoTelePresence SX10Quick Set andCisco DX70 usingCisco TelePresenceServer 7010 workssuccessfully,endpoints areregistered withCisco UnifiedCommunicationsManager

Hold/Resumein longduration MeetMeconferenceamong SX80Codec, SX10Quick Set andDX70 usingCisco TS7010, all areregisteredwith UnifiedCM

UCJ11.5S.TS.G.014

PassedSX80 Codec, SX10Quick Set and DX70-> Unified CM ->SIP Trunk ->Conductor -> CiscoTS on VM ->Hold\Resume

Verify whetherHold/Resume inCisco TelePresenceSX80Codec duringlong duration MeetMe conferencewith CiscoTelePresence SX10Quick Set andCisco DX70 usingCisco TelePresenceServer on VMmanaged by CiscoTelePresenceConductor workssuccessfully,endpoints areregistered withCisco UnifiedCommunicationsManager

Hold\Resumein longduration MeetMeconferenceamong SX80Codec, SX10Quick Set andDX70 usingCisco TS onVM managedby Conductor,endpoints areregisteredwith UnifiedCM

UCJ11.5S.TS.G.016



PassedMX200G2->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference

Verify whether theuser can see thenew lobby screenfrom CiscoTelePresenceMX200 G2registered withCisco UnifiedCommunicationsManager can joinMeet meConferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor

Joining MeetmeConferencefrom MX200G2 managedby Cisco TSon VM viaTelePresenceConductor andthe check thenew lobbyscreen

UCJ11.5PH2S.TS.G.001

PassedMX200 G2(PairedwithiPhone)->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference

Verify whether theuser can join Meetme Conferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor fromCisco TelePresenceMX200 G2 whichis registered withCisco UnifiedCommunicationsManager whileentering the correctPIN from iPhonewhich is pairedCisco TelePresenceMX200 G2 viaCisco Proximity

Joining MeetmeConferencefrom MX200G2 managedby Cisco TSon VM viaTelePresenceConductor andenter thecorrect PINfrom iPhonewhich ispaired withMX200 G2via Proximity




PassedMX300 G2(PairedwithiPhone)->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference

Verify whether theuser can join Meetme Conferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor fromCisco TelePresenceMX300 G2 whichis registered withCisco UnifiedCommunicationsManager whileentering the correctPIN from iPhonewhich is pairedCisco TelePresenceMX300 G2 viaCisco Proximity

Joining MeetmeConferencefrom MX300G2 managedby Cisco TSon VM viaTelePresenceConductor andenter thecorrect PINfrom iPhonewhich ispaired withMX300 G2via Proximity


PassedSX10 Quick Set->Unified CM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference

Verify whether theuser can hear theaudio prompt fromCisco TelePresenceSX10 Quick Setwhich is registeredwith Cisco UnifiedCommunicationsManager whilejoining Meet meConferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor

Joining MeetmeConferencefrom SX10Quick Setmanaged byCisco TS onVM viaTelePresenceConductor andthe check thenew audioprompt




PassedMX200 G2,SX10Quick Set & SX20Quick Set->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference

Verify whether theuser can hear theaudio prompt whileending theMeetmeConference fromCisco TelePresenceMX200 G2 duringthe Meet meConference amongCisco TelePresenceMX200 G2 , CiscoTelePresence SX10Quick Set & CiscoTelePresence SX20Quick Set all areregistered withCisco UnifiedCommunicationsManager managedby CiscoTelePresenceServer on VM viaCisco TelePresenceConductor

Joining MeetmeConferenceamongMX200 G2 ,SX10 QuickSet & SX20Quick Setmanaged byCisco TS onVM viaTelePresenceConductor andcheck theaudio promptwhen theconference isended fromMX200 G2


PassedDX650->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference

Verify whether theuser can hear theaudio prompt tojoin Meet meConferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor fromCisco DX650which is registeredwith Cisco UnifiedCommunicationsManager whileentering theincorrect PIN fromCisco DX650

Joining MeetmeConferencefrom DX650managed byCisco TS onVM viaTelePresenceConductor byentering theincorrect PINfrom DX650and check theaudio prompt




PassedMX200G2(PresentationSharing),SX10QuickSet & SX20 QuickSet->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference

Verify whether theuser can see thepresenter icon inMeet meConference fromCisco TelePresenceMX200 G2 duringthe Meet meConferencemanaged by CiscoTelePresenceServer on VM viaCisco TelePresenceConductor amongCisco TelePresenceMX200 G2 , CiscoTelePresence SX10Quick Set & CiscoTelePresence SX20Quick Set all areregistered withCisco UnifiedCommunicationsManager

Joining MeetmeConferenceamongMX200 G2 ,SX10 QuickSet & SX20Quick Setmanaged byCisco TS onVM viaTelePresenceConductor andcheck thepresenter iconin Meet meConferencefrom MX200G2


PassedNAVerify whether theuser can installCisco TelePresenceServer on VM inESXi6.0successfully

Install CiscoTS on VM inESXi 6.0



Verify whether theuser can see thewelcome screen tojoin Meet meConferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor fromCisco TelePresenceMX200 G2 whichis registered withCisco UnifiedCommunicationsManager

Joining MeetmeConferencefrom MX200G2 managedby Cisco TSon VM viaTelePresenceConductor andcheck thewelcomescreen




PassedDX650->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference

Verify whether theuser unable to joinMeet meConferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor fromCisco DX650which is registeredwith Cisco UnifiedCommunicationsManager whileentering the correctPIN from CiscoDX650 after 2incorrect entries

Joining MeetmeConferencefrom DX650managed byCisco TS onVM viaTelePresenceConductor andenter thecorrect PINfrom DX650after 2incorrectentries



Verify whether theuser can hear theaudio prompt inJapanese to joinMeet meConferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor fromCisco TelePresenceMX300 G2 whichis registered withCisco UnifiedCommunicationsManager

Joining MeetmeConferencefrom MX300G2 managedby Cisco TSon VM viaTelePresenceConductor andcheck theaudio promptin Japanese





Verify whether theuser can hear theaudio prompt inJapanese to endMeet meConferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor fromCisco TelePresenceMX300 G2 whichis registered withCisco UnifiedCommunicationsManager

End Meet meConferencefrom MX300G2 managedby Cisco TSon VM viaTelePresenceConductor andcheck theaudio promptin Japanese


PassedMX300G2(PresentationSharing),SX10QuickSet &EX90->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference

Verify whether theuser can see thepresenter icon inMeet meConference fromCisco TelePresenceMX300 G2 duringthe Meet meConferencemanaged by CiscoTelePresenceServer on VM viaCisco TelePresenceConductor amongCisco TelePresenceMX300 G2 , CiscoTelePresence SX10Quick Set & CiscoTelePresenceSystem EX90 allare registered withCisco UnifiedCommunicationsManager

Joining MeetmeConferenceamongMX300 G2 ,SX10 QuickSet & EX90managed byCisco TS onVM viaTelePresenceConductor andcheck thepresenter iconin Meet meConferencefrom MX300G2


Cisco TelePresence Content ServerDefectsStatusCall Component FlowDescriptionTitleLogical ID


Test Results SummaryCisco TelePresence Content Server

PassedMX300 G2, MX200 G2& SX80 Codec->Unified CM->SIPTrunk->MCU 5310MX300 G2->UnifiedCM-> SIPTrunk->Content Server

To verify that user isable to streaming livevideo conferencebetween CiscoTelePresence MX300G2 ,Cisco TelePresenceMX200 G2 & CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager via CiscoTelePresence MCU5310 using CiscoTelePresence ContentServer

Streaming livevideoconferencecall betweenMX300 G2,MX200G2&SX80 Codecregisteredwith UnifiedCM via MCU5310 usingContentServer

UCJ11.5PH2S.TCS.G.001

PassedSX10Quick Set,MX200G2 & SX80 Codec->Unified CM->SIPTrunk-> MCU 5320MX200 G2->UnifiedCM-> SIPTrunk->Content Server

To verify that user isable to streaming livevideo conferencebetween CiscoTelePresence SX10Quick Set ,CiscoTelePresence MX200G2 & CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager via CiscoTelePresence MCU5320 using CiscoTelePresence ContentServer

Streaming livevideoconferencecall betweenSX10 QuickSet, ,MX200G2 & SX80Codecregisteredwith UnifiedCM via MCU5320 usingContentServer




PassedSX10 Quick Set, SX20Quick Set & SX80Codec-> UnifiedCM->SIPTrunk->Conductor->CiscoTS 7010 SX20 QuickSet->Unified CM-> SIPTrunk->Content Server

To verify that user isable to streaming livevideo conferencebetween CiscoTelePresence SX10Quick Set ,CiscoTelePresence SX20Quick Set & CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager via CiscoTelePresence Server7010 with CiscoTelePresenceConductor using CiscoTelePresence ContentServer

Streaming livevideoconferencecall betweenSX10 QuickSet, ,SX20Quick Set &SX80 Codecregisteredwith UnifiedCM via CiscoTS 7010 withTelePresenceConductorusing ContentServer


PassedEX90-> UnifiedCM->EX60 EX90->Add->Unified CM->Integrator Package C90EX90->Unified CM->SIP Trunk->ContentServer

To verify that user isable to Streaming livevideo conference callbetween CiscoTelePresence SystemEX90 ,CiscoTelePresence SystemEX60 & CiscoTelePresence SystemIntegrator Package C90registered with CiscoUnifiedCommunicationsManager using CiscoTelePresence ContentServer

Streaming livevideoconferencecall betweenEX90 ,EX60& IntegratorPackage C90registeredwith UnifiedCM usingContentServer




PassedEX90-> CiscoVCS->EX60 EX90->Add->Cisco VCS->Integrator Package C90EX90->CiscoVCS->Content Server

To verify that user isable to Streaming livevideo conference callbetween CiscoTelePresence SystemEX90 ,CiscoTelePresence SystemEX60 & CiscoTelePresence SystemIntegrator Package C90registered with CiscoTelePresence VideoCommunication Serverusing CiscoTelePresence ContentServer

Streaming livevideoconferencecall betweenEX90 ,EX60& IntegratorPackage C90registeredwith CiscoVCS usingContentServer


PassedMX300 G2-> UnifiedCM->MX200 G2MX300 G2->UnifiedCM->SIPTrunk->Content Server

To verify that user isable to Record videocall between CiscoTelePresence MX300G2 & CiscoTelePresence MX200G2 registered withCisco UnifiedCommunicationsManager using CiscoTelePresence ContentServer

Recordingvideo callbetweenMX300 G2 &MX200 G2Registeredwith UnifiedCM usingContentServer


PassedSX20 Quick Set-> CiscoVCS->SX80 CodecSX20 Quick Set->CiscoVCS->Content Server

To verify that user isable to Record videocall between CiscoTelePresence SX20Quick Set & CiscoTelePresence SX80Codec registered withCisco TelePresenceVideo CommunicationServer using CiscoTelePresence ContentServer

Recordingvideo callbetweenSX20Quick Set &SX80 Codecregisteredwith CiscoVCS usingContentServer




PassedSX20 Quick Set->Unified CM->SIPTrunk->CiscoVCS->SX80 CodecSX80 Codec->CiscoVCS->Content Server

To verify that user isable to Record videocall between CiscoTelePresence SX20Quick Set registeredwith Cisco UnifiedCommunicationsManager & CiscoTelePresence SX80Codec registered withCisco TelePresenceVideo CommunicationServer using CiscoTelePresence ContentServer

Recordingvideo callbetweenSX20Quick Setregisteredwith UnifiedCM & SX80Codecregisteredwith CiscoVCS usingContentServer


PassedEX90-> UnifiedCM->SIP Trunk->CiscoVCS->SX80 CodecEX90->UnifiedCM->SIPTrunk->Content Server

To verify that user isable to Record videocall between CiscoTelePresence SystemEX90 registered withCisco UnifiedCommunicationsManager & CiscoTelePresence SX80Codec Registered withCisco TelePresenceVideo CommunicationServer using CiscoTelePresence ContentServer

Recordingvideo callbetweenEX90registeredwith UnifiedCM & SX80Codecregisteredwith CiscoVCS usingContentServer


PassedEX90-> UnifiedCM->EX60 EX90->Add->UnifiedCM->Integrator PackageC90 Integrator PackageC90->Unified CM-> SIPTrunk->Content Server

To verify that user isable to Recording videoconference callbetween CiscoTelePresence SystemEX90 ,CiscoTelePresence SystemEX60 & CiscoTelePresence SystemIntegrator Package C90registered with CiscoUnifiedCommunicationsManager using CiscoTelePresence ContentServer

Recordingvideoconferencecall betweenEX90 ,EX60& IntegratorPackage C90registeredwith UnifiedCM usingContentServer




PassedEX90-> CiscoVCS->EX60 EX90->Add->CiscoVCS->IntegratorPackage C90 IntegratorPackage C90->CiscoVCS->Content Server

To verify that user isable to Recording videoconference callbetween CiscoTelePresence SystemEX90 , CiscoTelePresence SystemEX60 & CiscoTelePresence SystemIntegrator Package C90registered with CiscoTelePresence VideoCommunication Serverusing CiscoTelePresence ContentServer

Recordingvideoconferencecall betweenEX90 ,EX60& IntegratorPackage C90registeredwith CiscoVCS usingContentServer


PassedMX300 G2, MX200 G2& SX80 Codec->Unified CM->SIPTrunk->MCU 5310MX300 G2->UnifiedCM-> SIPTrunk->Content Server

To verify that user isable to Record and playvideo conference callbetween CiscoTelePresence MX300G2 ,Cisco TelePresenceMX200 G2 & CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager via CiscoTelePresence MCU5310 using CiscoTelePresence ContentServer

Record andplay videoconferencecall betweenMX300 G2,MX200G2&SX80 Codecregisteredwith UnifiedCM via MCU5310 usingContentServer


PassedSX10Quick Set,MX200G2 & SX80 Codec->Unified CM->SIPTrunk-> MCU 5320MX200 G2->UnifiedCM-> SIPTrunk->Content Server

To verify that user isable to Record and playvideo conferencebetween CiscoTelePresence SX10Quick Set ,CiscoTelePresence MX200G2 & CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager via CiscoTelePresence MCU5320 using CiscoTelePresence ContentServer

Record andplay videoconferencecall betweenSX10 QuickSet,MX200G2 & SX80Codecregisteredwith UnifiedCM via MCU5320 usingContentServer




PassedSX10 Quick Set, SX20Quick Set & SX80Codec-> UnifiedCM->SIPTrunk->TelePresenceConductor->Cisco TS7010 SX20 QuickSet->Unified CM-> SIPTrunk->Content Server

To verify that user isable to Record and playvideo conferencebetween CiscoTelePresence SX10Quick Set ,CiscoTelePresence SX20Quick Set & CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager via CiscoTelePresence Server7010 with CiscoTelePresenceConductor using CiscoTelePresence ContentServer

Record andplay videoconferencecall betweenSX10 QuickSet,SX20Quick Set &SX80 Codecregisteredwith UnifiedCM via CiscoTS 7010 withTelePresenceConductorusing ContentServer


PassedEX90-> UnifiedCM->EX60 EX90->Add->UnifiedCM->Integrator PackageC90 EX90->UnifiedCM-> SIPTrunk->Content Server

To verify that user isable to Record and playvideo conference callbetween CiscoTelePresence SystemEX90 , CiscoTelePresence SystemEX60 & CiscoTelePresence SystemIntegrator Package C90registered with CiscoUnifiedCommunicationsManager using CiscoTelePresence ContentServer

Record andplay videoconferencecall betweenEX90 ,EX60& IntegratorPackage C90registeredwith UnifiedCM usingContentServer


PassedSX10 Quick Set (SIP)->Cisco VCS-> TCS (SIP)

Verify whetherInterworking video callbetween SX10 QuickSet registered withCisco VCS as a SIPendpoint , TCS isregistered with CiscoVCS by SIP establishedsuccessfully

Video callbetweenSX10Quick Setregisteredwith CiscoVCS by SIPendpoint ,TCS isregisteredwith CiscoVCS by SIP

UCJ11.5PH2S.TCS.SR.003



PassedEX90 (SIP)-> CiscoVCS-> TCS (SIP)

Verify whether videocall between EX90registered with CiscoVCS as a SIP endpoint, TCS is registered withCisco VCS by H.323established successfully

Video callbetweenEX90registeredwith CiscoVCS as a SIPendpoint ,TCS isregisteredwith CiscoVCS by SIP


PassedSX10 Quick Set, SX20Quick Set,MX200-G2->Unified CM->SIPTrunk->Cisco MCU5310-> TCS

To verify that user isable to streaming livevideo conferencebetween SX10 QuickSet, SX20 Quick Set &MX200-G2 with CiscoMCU5310 using CiscoTelePresence ContentServer

Streaming livevideoconferencebetweenSX10Quick Set,SX20 QuickSet &MX200-G2with CiscoMCU 5310using CiscoTelePresenceContentServer


PassedSX80 Codec,MX300-G2,MX200-G2->Unified CM->SIPTrunk->Cisco TS 7010->TCS

To verify that user isable to streaming livevideo conferencebetween SX80 Codec,MX300-G2 &MX200-G2 with CiscoTelePresence Server7010 using CiscoTelePresence ContentServer

Streaming livevideoconferencebetweenSX80Codec ,MX300-G2 &MX200-G2with CiscoTelePresenceServer 7010using CiscoTelePresenceContentServer




PassedSX80 Codec,MX300-G2,MX200-G2->Unified CM->SIPTrunk->Cisco MCU5320-> TCS

To verify that user isable to streaming livevideo conferencebetween SX80 Codec,MX300-G2 &MX200-G2 with CiscoTelePresence MCU5320 using CiscoTelePresence ContentServer

Streaming livevideoconferencebetweenSX80Codec ,MX300-G2 &MX200-G2with CiscoMCU 5320using CiscoTelePresenceContentServer


PassedSX10 Quick Set, SX80Codec & MX200-G2->Unified CM->SIPTrunk->Cisco MCU5320-> TCS

To verify that user isable to streaming livevideo conferencebetween SX10 QuickSet , SX80 Codec &MX200-G2 with CiscoTelePresence MCU5320 using CiscoTelePresence ContentServer

Streaming liveHD videoconferencebetweenSX10Quick Set ,SX80 Codec&MX200-G2with CiscoMCU 5320using CiscoTelePresenceContentServer


PassedSX10 Quick Set, SX80Codec & MX200-G2->Unified CM->SIPTrunk->Cisco TS 7010->TCS

To verify that user isable to streaming livevideo conferencebetween SX10 QuickSet , SX80 Codec &MX200-G2 with CiscoTelePresence Server7010 using CiscoTelePresence ContentServer

Streaming liveHD videoconferencebetweenSX10Quick Set ,SX80 Codec&MX200-G2with Cisco TS7010 usingCiscoTelePresenceContentServer


Cisco Prime Collaboration

Cisco Prime Collaboration AnalyticsDefectsStatusDescriptionTitleLogical ID


Test Results SummaryCisco Prime Collaboration

PassedGo to Analytics->CapacityAnalysis and verify whetherthe user is able to view theCall Volume detailsavailable in Busy-HourTrunk Capacity dashlet inCisco Prime CollaborationAssurance Enterprise mode

Check the CallVolume in Busy-HourTrunkCapacity dashletin Enterprise mode

UCJ11.5S.CPC-AN.G.001

PassedGo to Analytics->CapacityAnalysis and verify whetherthe user is able to view theCall Volume detailsavailable in Busy-HourTrunk Capacity dashlet inCisco Prime CollaborationAssurance MSP mode

Check the CallVolume in Busy-HourTrunkCapacity dashletin MSP mode


PassedGo to Analytics-> CapacityAnalysis and verify whetherthe user is able to view theCall Volume detailsavailable in Busy-HourRoute Group Capacitydashlet in Cisco PrimeCollaboration AssuranceEnterprise mode

Check the CallVolume in Busy-HourRoute Group Capacitydashlet in EnterpriseMode


PassedGo to Analytics-> CapacityAnalysis and verify whetherthe user is able to view theCall Volume detailsavailable in Busy-HourRoute Group Capacitydashlet in Cisco PrimeCollaboration AssuranceMSP mode

Check the CallVolume in Busy-HourRoute Group Capacitydashlet in MSP Mode


PassedGo to Analytics-> CapacityAnalysis and verify whetherthe user is able to view theCall Volume details inBusy-Hour Route GroupCapacity dashlet afterupgrading Cisco PrimeCollaboration Assurancefrom 11.0 to 11.5 build inEnterprise mode

Check the CallVolume in Busy-HourRoute Trunk Capacitydashlet after upgradingfrom CPC Assurance11.0 to 11.5 build inEnterprise mode



Test Results SummaryCisco Prime Collaboration Analytics

PassedGo to Analytics-> CapacityAnalysis and verify whetherthe user is able to view theCall Volume details inBusy-Hour Route GroupCapacity dashlet afterupgrading Cisco PrimeCollaboration Assurancefrom 11.0 to 11.5 build inMSP mode

Check the CallVolume in Busy-HourRoute Group Capacitydashlet after upgradingfrom CPC Assurance11.0 to 11.5 build inMSP mode


PassedLogin as SystemAdministrator user -> Go toAnalytics and verifywhether the user can accessthe Technology AdoptionDashboard metrics in CiscoPrime CollaborationAssurance MSP mode

Validate whetherSystem Administratoruser can access theTechnology Adoptionmetrics Dashboard inMSP mode


PassedLogin as SystemAdministrator user -> Go toAnalytics and verifywhether the user can accessthe Traffic AnalysisDashboard metrics in CiscoPrime CollaborationAssurance MSP mode

Validate whetherSystem Administratoruser can access theTraffic AnalysisDashboard in MSPmode


PassedLogin as SystemAdministrator user -> Go toAnalytics and verifywhether the user can accessthe UC System PerformanceDashboard metrics in CiscoPrime CollaborationAssurance MSP mode

Validate whetherSystem Administratoruser can access the UCSystem PerformanceDashboard in MSPmode


PassedLogin as SystemAdministrator user -> Go toAnalytics and verifywhether the user can accessthe Asset Usage Dashboardmetrics in Cisco PrimeCollaboration AssuranceEnterprise mode

Validate whetherSystem Administratoruser can access theAsset UsageDashboard inEnterprise mode




PassedLogin as SystemAdministrator user -> Go toAnalytics and verifywhether the user can accessthe Capacity AnalysisDashboard metrics in CiscoPrime CollaborationAssurance Enterprise mode

Validate whetherSystem Administratoruser can access theCapacity AnalysisDashboard inEnterprise mode.


PassedLogin as SystemAdministrator user- > Go toAnalytics and verifywhether the user can accessVideo conference dashboardmetrics in Cisco PrimeCollaboration AssuranceMSP mode

Validate whetherSystem Administratoruser can access theVideo conferencedashboard inEnterprise mode.


PassedGo to Analytics->TechnologyAdoption andverify whether ReportHeader (Export/Print ) isavailable in TechnologyUsage dashlet in CiscoPrime CollaborationAssurance Enterprise mode

Check for ReportHeader (Export/Print )in Technology Usagedashlet in Enterprisemode


PassedGo to Analytics ->AssertUsage and verify whetherReport Header (Export/Print) is available in Least UsedEndpoint Types dashlet inCisco Prime CollaborationAssurance Enterprise mode

Check for ReportHeader (Export/Print )in Least UsedEndpoint Typesdashlet in Enterprisemode


PassedGo to Analytics-> UCSystem Performance andverify whether ReportHeader is available in CPUUtilization dashlet in CiscoPrime CollaborationAssurance Enterprise mode

Check for ReportHeader (Export/Print )in CPU Utilizationdashlet in Enterprisemode


PassedGo to Analytics ->UCSystem Performance andverify whether ReportHeader is available inMemory Utilization dashletin Cisco PrimeCollaboration AssuranceEnterprise mode

Check for ReportHeader (Export/Print )in Memory Utilizationdashlet in Enterprisemode




PassedGo to Analytics -> ServiceExperience dashboard andverify whether Filtersdropdown are working inService ExperienceDistribution dashlet afterupgrading fromCisco PrimeCollaboration Assurance11.0 to 11.5 Enterprisemodein IE 11

Check for the Filtersdropdown for ServiceExperienceDistribution dashletafter upgrading from11.0 to 11.5 Enterprisemode in IE 11


PassedGo to Analytics -> ServiceExperience dashboard andverify whether Filtersdropdown are working inService ExperienceDistribution dashlet afterupgrading fromCisco PrimeCollaboration Assurance11.0 to 11.5 Enterprisemodein chrome46

Check for the Filtersdropdown for ServiceExperienceDistribution dashletafter upgrading from11.0 to 11.5 Enterprisemode in Chrome 46


PassedGo to Analytics -> ServiceExperience dashboard andverify whether Filtersdropdown are working inService ExperienceDistribution dashlet afterupgrading fromCisco PrimeCollaboration Assurance11.0 to 11.5 Enterprisemodein FF 38

Check for the Filtersdropdown for ServiceExperienceDistribution dashletafter upgrading from11.0 to 11.5 Enterprisemode inMozilla FF 38


PassedGo to Analytics->MyDashboard and verifywhether the added Callgrade for Location and Callstatus for Location dashletis available under ServiceExperience dashboard afterupgrading from 11.0 to 11.5Cisco Prime CollaborationAssurance Enterprise modein IE 11

Add and Validate Callgrade for Location andCall status forLocation dashlet inService Experiencedashboard afterupgrading from 11.0to 11.5 Enterprisemode in IE 11




PassedGo to Analytics->MyDashboard and verifywhether the added Callgrade for Location and Callstatus for Location dashletis available under ServiceExperience dashboard afterupgrading from 11.0 to 11.5Cisco Prime CollaborationAssurance Enterprise modein FF38

Add and Validate Callgrade for Location andCall status forLocation dashlet inService Experiencedashboard afterupgrading from 11.0to 11.5 Enterprisemode in FF 38


PassedGo to Analytics->MyDashboard and verifywhether the added Callgrade for Location and Callstatus for Location dashletis available under ServiceExperience dashboard afterupgrading from 11.0 to 11.5in Cisco PrimeCollaboration AssuranceEnterprise mode inChrome42

Add and Validate Callgrade for Location andCall status forLocation dashlet inService Experiencedashboard afterupgrading from 11.0to 11.5 Enterprisemode in Chrome 42


PassedGo to Analytics-> MyDashboard and verifywhether the added Callgrade for Location and Callstatus for Location dashletis available in ServiceExperience dashboard afterenabling Favorite option inCisco Prime CollaborationAssurance MSP mode

Add and Validate Callgrade for Location andCall status forLocation dashlet inService Experiencedashboard afterenabling Favoriteoption in MSP mode


PassedGo to Analytics-> MyDashboard and verifywhether the added Callgrade for Location and Callstatus for Location dashletis available in ServiceExperience dashboard afterenabling Favorite option inCisco Prime CollaborationAssurance Enterprise mode

Add and Validate Callgrade for Location andCall status forLocation dashlet inService Experiencedashboard afterenabling Favoriteoption in Enterprisemode




PassedGo to Analytics-> MyDashboard and verifywhether the added Callgrade for Location and Callstatus for Location dashletis available in ServiceExperience dashboard afterenabling Favorite option inCisco Prime CollaborationAssurance MSP mode inIE11

Add and Validate Callgrade for Location andCall status forLocation dashlet inService Experiencedashboard afterenabling Favoriteoption in MSP modeusing IE11


PassedGo to Analytics->ServiceExperience Dashboard andverify whether user is ableto check the Filter option"From and To" underService ExperienceDistribution dashlet in CiscoPrime CollaborationAssurance Enterprise mode

Check the Filter option"From and To" inService ExperienceDashboard inEnterprise mode


PassedGo to Analytics->MyDashboard and Verifywhether user is able to checkthe Filter option "From andTo" in Service ExperienceDistribution dashlet in CiscoPrime CollaborationAssurance Enterprise mode

Check the Filter option"From and To" innewly added ServiceExperienceDistribution dashlet inEnterprise mode


PassedGo to Analytics->ServiceExperience Dashboard andverify whether user is ableto check the Filter option"From and To" underservice ExperienceDistribution dashlet in CiscoPrime CollaborationAssurance MSP mode

Check the Filter option"From and To" inService ExperienceDashboard in MSPmode


PassedGo to Analytics->MyDashboard and Verifywhether user is able to checkthe Filter option "From andTo" in Service ExperienceDistribution dashlet in CiscoPrime CollaborationAssurance MSP mode

Check the Filter option"From and To" innewly added ServiceExperienceDistribution dashlet inMSP mode




PassedGo to Analytics->ServiceExperience Dashboard andverify whether user is ableto check the Filter option"From and To" afterupgrading from 11.0 to 11.5Cisco Prime CollaborationAssurance Enterprise mode

Check the Filter option"From and To" inService ExperienceDistribution dashletafter upgrading from11.0 to 11.5 inEnterprise mode


PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco TelePresence Server7010 Version 4.3 in CiscoPrime CollaborationAssurance Enterprise modesuccessfully

Add and integrate theTPS 7010 Version 4.3in InventoryManagementDashboard

UCJ11.5PH2S.CPC-AN.G.001

PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco TelePresenceConductor 4.x in CiscoPrime CollaborationAssurance Enterprise modesuccessfully

Add and integrate theCisco TelePresenceConductor 4.x inInventoryManagementDashboard


PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco TelePresenceManagement Suite 15.2 inCisco Prime CollaborationAssurance Enterprise modesuccessfully

Add and integrate theCisco TelePresenceManagement Suite15.2 in InventoryManagementDashboard


PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco TelePresence VideoCommunication ServerX8.8in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Add and integrate theCisco TelePresenceVideo CommunicationServer X8.8 inInventoryManagementDashboard




PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco Unity Connection10.5 in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Add and integrate theCisco UnityConnection 10.5 inInventoryManagementDashboard


PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco UnifiedCommunications Manager11.5 in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Add and integrate theCisco UnifiedCommunicationsManager 11.5 inInventoryManagementDashboard


PassedGo to Inventory ->Inventory Management andverify whether the user isable to manage CiscoTelePresence SX10 QuickSet endpoint which is havingCE8.1 build in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Manage SX10 QuickSet endpoint havingCE8.1 build inInventoryManagementDashboard


PassedGo to Inventory ->Inventory Management andverify whether the user isable to manage CiscoUnified IP Phone 8945 inCisco Prime CollaborationAssurance Enterprise modesuccessfully

Manage IP Phone8945 in InventoryManagementDashboard


PassedGo to Inventory ->Inventory Management andverify whether the user isable to manage CiscoUnified IP Phone 9951 inCisco Prime CollaborationAssurance Enterprise modesuccessfully

Manage IP Phone9951 in InventoryManagementDashboard




PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theSynergy phone DX650 inCisco Prime CollaborationAssurance Enterprise modesuccessfully

Add and integrate theSynergy phoneDX650in InventoryManagementDashboard


PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco UnifiedCommunications ManagerExpress in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Add and integrate theCisco UnifiedCommunicationsManager Express inInventoryManagementDashboard


PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theSurvivable Remote SiteTelephony in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Add and integrate theSurvivable RemoteSite Telephony inInventoryManagementDashboard


PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theAggregation ServicesRouters in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Add and integrate theAggregation ServicesRouters in InventoryManagementDashboard


PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theIntegrated Services Routersin Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Add and integrate theIntegrated ServicesRouters in InventoryManagementDashboard




PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco UnifiedCommunications ManagerIM&Presence 11.5 in CiscoPrime CollaborationAssurance Enterprise modesuccessfully

Add and integrate theCisco UnifiedCommunicationsManager IM &Presence 11.5 inInventoryManagementDashboard


PassedGo to Inventory ->Inventory Management andverify whether the user isable to manage Cisco Jabberfor Android in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Manage Jabber forAndroid in InventoryManagementDashboard


PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to Filter Last28 Days of data for Audiooption under Location CACBandwidth UtilizationDashlet in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Filter Last 28 Days ofdata for Audio optionin Location CACBandwidth UtilizationDashlet


PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to Filter Last7 Days of data for Audiooption under Location CACBandwidth UtilizationDashlet in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Filter Last 7 Days ofdata for Audio optionin Location CACBandwidth Utilizationin Detailed AnalysisDashlet


PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to Filter Last7 Days of data for Videooption under Location CACBandwidth UtilizationDashlet in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Filter Last 7 Days ofdata for Video optionin Location CACBandwidth UtilizationDashlet




PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to Filter Last13 Months of data forImmersive option underLocation CAC BandwidthUtilization Dashlet in CiscoPrime CollaborationAssurance Enterprise modesuccessfully

Filter Last 13 Monthsof data for Immersiveoption in LocationCAC BandwidthUtilization in DetailedAnalysis Dashlet


PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to Filter Last7 Days of data forImmersive option underLocation CAC BandwidthUtilization Dashlet in CiscoPrime CollaborationAssurance Enterprise modesuccessfully

Filter Last 7 Days ofdata for Immersiveoption in LocationCAC BandwidthUtilization Dashlet


PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to Filter Last2 Weeks of data for Videooption under Location CACBandwidth UtilizationDashlet in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Filter Last 2 Weeks ofdata for Video optionin Location CACBandwidth Utilizationin Detailed AnalysisDashlet


PassedGo to Analytics ->Technology Adoption andverify whether the user isable to view the CiscoTelePresence SX10 QuickSet Endpoint details in Gridmode in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

View the SX10 QuickSet Endpoint details inGrid mode underEndpointsDeploymentSummary Dashlet


PassedGo to Analytics -> MyDashboard and verifywhether the user is able toadd Conductor Bridge PoolUtilization Dashlet in CiscoPrime CollaborationAssurance Enterprise modesuccessfully

AddConductor BridgePool UtilizationDashlet in MyDashboard




PassedLogin as Operator user andverify whether the Operatoruser is able to view theAnalytics tab in main menuin Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Analytics menu link isavailable for Operatoruser in Enterprisemode


PassedLogin as Operator user andverify whether the Operatoruser is unable to view theAnalytics tab in main menuin Cisco PrimeCollaboration AssuranceMSP mode successfully

Analytics menu link isunavailable forOperator user in MSPmode


PassedLogin as SystemAdministrator user andverify whether the SystemAdministrator user canaccess the UC SystemPerformance Dashboard inCisco Prime CollaborationAssurance MSP modesuccessfully

Validate SystemAdministrator user canaccess the UC SystemPerformanceDashboard in MSPmode


PassedGo to Analytics -> ServiceExperience Dashboard andverify whether the user isable to Filter Audio only forCall quality AnalysisDashlet in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Filter Audio only forCall Quality AnalysisDashlet


PassedGo to Analytics -> VideoConference Analysis andverify whether the user isable to filter the data forLast 28 days in ConductorBridge Pool UtilizationDashlet in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Filter the data for Last28 days in ConductorBridge Pool UtilizationDashlet




PassedGo to Analytics ->Technology Adoption andverify whether the user isable to view EndpointsDevelopment Summary inColumn Chart in DetailedAnalysis Dashlet in CiscoPrime CollaborationAssurance Enterprise modesuccessfully

EndpointsDevelopmentSummary in ColumnChart in DetailedAnalysis Dashlet


PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to schedulethe report for TrunkUtilization Dashlet in CiscoPrime CollaborationAssurance Enterprise modesuccessfully

Schedule the report forTrunk UtilizationDashlet


PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to viewTrunk Utilization Dashlet asGrid mode in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

View TrunkUtilization Dashlet inGrid mode


PassedLogin as SystemAdministrator user andverify whether the SystemAdministrator user canaccess the TechnologyAdoption Dashboard inCisco Prime CollaborationAssurance MSP modesuccessfully

Validate SystemAdministrator canaccess the TechnologyAdoption Dashboardin MSP mode


PassedLogin as SystemAdministrator user andverify whether the SystemAdministrator user canaccess the Asset UsageDashboard in Cisco PrimeCollaboration AssuranceMSP mode successfully

Validate SystemAdministrator canaccess the Asset UsageDashboard in MSPmode




PassedLogin as SystemAdministrator user andverify whether the SystemAdministrator user canaccess the CapacityAnalysisDashboard in Cisco PrimeCollaboration AssuranceMSP mode successfully

Validate SystemAdministrator canaccess the CapacityAnalysis Dashboard inMSP mode


PassedLogin as SystemAdministrator user andverify whether the SystemAdministrator user canaccess the ServiceExperience Dashboard inCisco Prime CollaborationAssurance MSP modesuccessfully

Validate SystemAdministrator canaccess the ServiceExperienceDashboardin MSP mode


PassedLogin as SystemAdministrator user andverify whether the SystemAdministrator user canaccess the UC SystemPerformance Dashboard inCisco Prime CollaborationMSP Enterprise modesuccessfully

Validate SystemAdministrator canaccess the UC SystemPerformanceDashboard in MSPmode


PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to View theDetached Trunk UtilizationDashlet in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

View the DetachedTrunk UtilizationDashlet


PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to exportTrunk Utilization Dashletdata to CSV format in CiscoPrime CollaborationAssurance Enterprise modesuccessfully

Export TrunkUtilization Dashletdata to CSV format




PassedLogin to Cisco PrimeCollaboration AssuranceServer as Admin throughvSphere client and verifythat user is able to upgradefrom 10.5 to 11.5 inEnterprise mode in BE7000Medium successfully

Upgrade Cisco PrimeCollaborationAssurance from 10.5to 11.5 in Enterprisemode in BE7000Medium


PassedVerify that user is able toview the successful messageindication at the root levelafter upgrade Cisco PrimeCollaboration Assurancefrom 10.5.1 to 11.5 in MSPMode

Message indication atthe root level afterupgrade Cisco PrimeCollaborationAssurance from 10.5.1to 11.5 in MSP Mode


PassedVerify that user is able toview the successful messageindication at the root levelafter upgrade Cisco PrimeCollaboration Assurancefrom 11.0 to 11.5 in MSPMode

Message indication atthe root level afterupgrade Cisco PrimeCollaborationAssurance from 11.0to 11.5 in MSP Mode


PassedVerify that user is able toview the successful messageindication at the root levelafter upgrade Cisco PrimeCollaboration Assurancefrom 10.5.1 to 11.5 inEnterprise Mode

Message indication atthe root level afterupgrade Cisco PrimeCollaborationAssurance from 10.5.1to 11.5 in EnterpriseMode


PassedVerify that user is able toview the successful messageindication at the root levelafter upgrade Cisco PrimeCollaboration Assurancefrom 11.0 to 11.5 inEnterprise Mode

Message indication atthe root level afterupgrade Cisco PrimeCollaborationAssurance from 11.0to 11.5 in EnterpriseMode


PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to see the correctnumber of 8800 seriesendpoints deployed for thelast 7 Days in the EndpointDeployment SummaryDashboard in ChartMode inCisco Prime CollaborationAssurance successfully

8800 series endpointsConfigured Metricstatus in Chart Modefor "7 Days ago" usingEndpoint DeploymentSummary Dashboard




PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the correctnumber of 7800 seriesendpoints deployed for thelast 7 Days in the EndpointDeployment SummaryDashboard in ChartMode inCisco Prime CollaborationAssurance successfully

7800 series endpointsConfigured Metricstatus in Chart Modefor "7 Days ago" usingEndpoint DeploymentSummary Dashboard


PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the correctnumber of 8800 seriesendpoints deployed for thelast 7 Days in the EndpointDeployment SummaryDashboard in Grid Mode inCisco Prime CollaborationAssurance successfully

8800 series endpointsConfigured Metricstatus in Grid Modefor "7 Days ago" usingEndpoint DeploymentSummary Dashboard


PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the correctnumber of 7800 seriesendpoints deployed for thelast 7 Days in the EndpointDeployment SummaryDashboard in Grid Mode inCisco Prime CollaborationAssurance successfully

7800 series endpointsConfigured Metricstatus in Grid Modefor "7 Days ago" usingEndpoint DeploymentSummary Dashboard


PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exactattempted Call Volumedetails happened for the last2 Weeks in the Call Volumeby Endpoint ModelDashboard in Cisco PrimeCollaboration Assurancesuccessfully

Attempted CallVolume Metric statusfor "Last 2 Weeks"using Call Volume byEndpoint ModelDashboard




PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exactCompleted Call Volumedetails happened for the last2 Weeks in the Call Volumeby Endpoint ModelDashboard in Cisco PrimeCollaboration Assurancesuccessfully

Completed CallVolume Metric statusfor "Last 2 Weeks"using Call Volume byEndpoint ModelDashboard


PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exactDropped Call Volumedetails happened for the last2 Weeks in the Call Volumeby Endpoint ModelDashboard in Cisco PrimeCollaboration Assurancesuccessfully

Dropped Call VolumeMetric status for "Last2 Weeks" using CallVolume by EndpointModel Dashboard


PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exact FailedCall Volume detailshappened for the last 2Weeks in the Call Volumeby Endpoint ModelDashboard in Cisco PrimeCollaboration Assurancesuccessfully

Failed Call VolumeMetric status for "Last2 Weeks" using CallVolume by EndpointModel Dashboard


PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exactattempted Call Volumedetails happened for the last2 Weeks in the Call Volumeby Endpoint TypesDashboard in Cisco PrimeCollaboration Assurancesuccessfully

Attempted CallVolume Metric statusfor "Last 2 Weeks"using Call Volume byEndpoint TypesDashboard




PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exactCompleted Call Volumedetails happened for the last2 Weeks in the Call Volumeby Endpoint TypesDashboard in Cisco PrimeCollaboration Assurancesuccessfully

Completed CallVolume Metric statusfor "Last 2 Weeks"using Call Volume byEndpoint TypesDashboard


PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exactDropped Call Volumedetails happened for the last2 Weeks in the Call Volumeby Endpoint TypesDashboard in Cisco PrimeCollaboration Assurancesuccessfully

Dropped Call VolumeMetric status for "Last2 Weeks" using CallVolume by EndpointTypes Dashboard


PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exact FailedCall Volume detailshappened for the last 2Weeks in the Call Volumeby Endpoint TypesDashboard in Cisco PrimeCollaboration Assurancesuccessfully

Failed Call VolumeMetric status for "Last2 Weeks" using CallVolume by EndpointTypes Dashboard


PassedGo to the Analytics ->VideoConference Analysis andverify whether the user isable to view the usage trendsof the Conference Resourcesfor the specified Clusterwith the duration as last 2Weeks in Cisco PrimeCollaboration Assurancesuccessfully

Video ConferenceAnalysis for thespecified Cluster withthe duration as "Last 2Weeks"




PassedGo to the Analytics ->VideoConference Analysis andverify whether the user isable to view the usage trendsof the Conference Resourcesfor the specified Clusterwith the duration as last 4Weeks in Cisco PrimeCollaboration Assurancesuccessfully

Video ConferenceAnalysis for thespecified Cluster withthe duration as "Last 4Weeks"


PassedGo to the Analytics ->VideoConference Analysis andverify whether the user isable to view the usage trendsof the Conference Resourcesfor the specified Clusterwith the duration as last 7Days in Cisco PrimeCollaboration Assurancesuccessfully

Video ConferenceAnalysis for thespecified Cluster withthe duration as "Last 7Days"


PassedGo to the Analytics ->VideoConference Analysis andverify whether the user isable to view the usage trendsof the Conference Resourcesfor the specified Clusterwith the duration as last 14Days in Cisco PrimeCollaboration Assurancesuccessfully

Video ConferenceAnalysis for thespecified Cluster withthe duration as "Last14 Days"


PassedGo to the Analytics ->Assetusage and verify whether theuser is able to view theEndpoint DeploymentSummary Dashboard underAsset Usage tab in CiscoPrime CollaborationAnalytics Business Editionsuccessfully

Endpoint DeploymentSummary Dashboardmove status fromTechnology Adaptionto Asset Usage tab inCisco PrimeCollaborationAnalytics BusinessEdition


PassedGo to the Analytics ->Assetusage and verify whether theuser is able to view the CallVolume by Endpoint TypesDashboard under AssetUsage tab in Cisco PrimeCollaboration AnalyticsBusiness Editionsuccessfully

Call Volume byEndpoint TypesDashboardmove statusfrom TechnologyAdaption to AssetUsage tab in CiscoPrime CollaborationAnalytics BusinessEdition




PassedGo to the Analytics ->Assetusage and verify whether theuser is able to view the CallVolume by Endpoint ModelDashboard under AssetUsage tab in Cisco PrimeCollaboration AnalyticsBusiness Editionsuccessfully

Call Volume byEndpoint ModelDashboardmove statusfrom TechnologyAdaption to AssetUsage tab in CiscoPrime CollaborationAnalytics BusinessEdition


PassedGo to the Analytics->Service Experience andverify whether the user isable to view the Call Gradefor Location metricdetails(Good, Acceptableand Poor) for the last 7 Daysin Cisco PrimeCollaboration Assurancesuccessfully

"Call Grade forLocations" metricsstatus for good,acceptable and poorcalls based on thelocation with the timeperiod as Last 7 Days


PassedGo to the Analytics->Service Experience andverify whether the user isable to view the Call Gradefor Location metricdetails(Good, Acceptableand Poor) for the last 2Weeks in Cisco PrimeCollaboration Assurancesuccessfully

"Call Grade forLocations" metricsstatus for good,acceptable and poorcalls based on thelocation with the timeperiod as Last 2Weeks


PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco IX5000 in CiscoPrime CollaborationAssurance Enterprise modesuccessfully in BE7000-Medium

Add and integrate theCisco IX5000 inInventoryManagementDashboard in BE7000-Medium


PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco TelePresence ServerVersion 4.3 in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully in BE7000-Medium

Add and integrate theCisco TelePresenceServer Version 4.3 inInventoryManagementDashboard in BE7000-Medium




PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco TelePresenceConductor version XC4.2 inCisco Prime CollaborationAssurance Enterprise modesuccessfully in BE7000-Medium

Add and integrate theCisco TelePresenceConductor versionXC4.2 in InventoryManagementDashboard in BE7000-Medium


PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco UnifiedCommunications ManagerIM&Presence 11.0 in CiscoPrime CollaborationAssurance Enterprise modesuccessfully in BE7000-Medium

Add and integrate theCisco UnifiedCommunicationsManager IM &Presence 11.0 inInventoryManagementDashboard in BE7000-Medium


PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco TelePresence VideoCommunication ServerExpressway X8.8 in CiscoPrime CollaborationAssurance Enterprise modesuccessfully in BE7000-Medium

Add and integrate theCisco TelePresenceVideo CommunicationServer ExpresswayX8.8 in InventoryManagementDashboard in BE7000-Medium


PassedGo to Analytics -> UCSystem Performance andverify whether the user isable to Filter Last 12Months of Time period forCPU Utilization in UCSystemPerformanceDashletin Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully in BE7000-Medium

Filter Last 12 Monthsof Time period forCPUUtilization in UCSystem PerformanceDashlet in BE7000-Medium




PassedGo to Analytics -> UCSystem Performance andverify whether the user isable to Filter Last 52 Weeksof Time period for CPUUtilization in UC SystemPerformance Dashlet inCisco Prime CollaborationAssurance Enterprise modesuccessfully in BE7000-Medium

Filter Last 52 Weeksof Time period forCPUUtilization in UCSystem PerformanceDashlet in BE7000-Medium


PassedGo to Analytics -> UCSystem Performance andverify whether the user isable to Filter Last 14 Daysof Time period for MemoryUtilization in UC SystemPerformance Dashlet inCisco Prime CollaborationAssurance Enterprise modesuccessfully in BE7000-Medium

Filter Last 14 Days ofTime period forMemory Utilization inUC SystemPerformance Dashletin BE 7000-Medium


PassedGo to Analytics -> UCSystem Performance andverify whether the user isable to Filter Last 4 Weeksof Time period for MemoryUtilization in UC SystemPerformance Dashlet inCisco Prime CollaborationAssurance Enterprise modesuccessfully in BE7000-Medium

Filter Last 4 Weeks ofTime period forMemory Utilization inUC SystemPerformance Dashletin BE 7000-Medium


Cisco Prime Collaboration AssuranceDefectsStatusDescriptionTitleLogical ID


Test Results SummaryCisco Prime Collaboration Assurance

PassedGo to SystemAdministration-> BackupSettings and verifywhether the user is ableto check the number ofbackup device kept insFTP when backupCategory is selected asAssurance and Analyticsin Cisco PrimeCollaboration AssuranceEnterprise mode

Check the number ofbackup device kept insFTP when backupCategory as Assuranceand Analytics InEnterprise mode

UCJ11.5S.CPC-AS.G.001

PassedGo to SystemAdministration-> BackupSettings and verifywhether the user is ableto check the number ofbackup device kept insFTP when backupCategory is selected asAssurance and Analyticsin Cisco PrimeCollaboration AssuranceMSP mode

Check the number ofbackup device kept insFTP when backupCategory as Assuranceand Analytics In MSPmode


PassedGo to Cisco PrimeCollaboration AssuranceServer as Admin, throughvSphere client and verifywhether user is able toinstall BE OVA StandardEdition in virtualappliance successfully

Check for StandardEdition and install ofBE OVA in virtualappliance


PassedGo to Cisco PrimeCollaboration AssuranceServer as Admin, throughvSphere client and verifywhether user is able toinstall BE OVAEnterprise Edition invirtual appliancesuccessfully

Check for EnterpriseEdition and install ofBE OVA in virtualappliance




PassedGo to AssuranceAdministration ->EventCustomization and verifywhether Add option for"Notes for Email" isavailable under System inCisco PrimeCollaboration AssuranceMSP mode

Check for Add optionin Event customizationin MSP mode


PassedGo to AssuranceAdministration ->EventCustomization and verifywhether Add option for"Notes for Email" isavailable under System inCisco PrimeCollaboration AssuranceEnterprise mode

Check for Add optionin Event customizationin Enterprise mode


PassedGo to AssuranceAdministration -> EventCustomization and verifywhether user is able toEdit/Delete the "Notes forEmail" under System inCisco PrimeCollaboration AssuranceEnterprise mode

Check user is able toEdit/Delete the "Notesfor Email" inEnterprise Mode


PassedGo to AssuranceAdministration -> EventCustomization and verifywhether user is able toEdit/Delete the "Notes forEmail" under System inCisco PrimeCollaboration AssuranceMSP mode

Check user is able toEdit/Delete the "Notesfor Email" in MSPMode


PassedGo to AssuranceAdministration -> EventCustomization and verifywhether user is able toEdit /Delete the "Notesfor Email" under Systemafter upgrading fromCisco PrimeCollaboration Assurance11.0 to 11.5 in Enterprisemode

Check user is able toEdit/Delete the "Notesfor Email" afterupgrading from 11.0 to11.5 in EnterpriseMode




PassedGo to Device Inventory-> InventoryManagementand verify that CiscoUnified CommunicationsManager 8.6.1 applicationis available under currentinventory in Cisco PrimeCollaboration AssuranceEnterprise mode

Add and IntegrateUnified CM 8.6.1 withCisco PrimeCollaborationAssurance


PassedGo to Device Inventory->InventoryManagementand verify that CiscoUnified CommunicationsManager 11.5 applicationis available under currentinventory in Cisco PrimeCollaboration AssuranceEnterprise mode

Add and IntegrateUnified CM 11.5 withCisco PrimeCollaborationAssurance inEnterprise mode


PassedGo to Device Inventory->InventoryManagementand verify that CiscoUnity Connection 11.5application is availableunder current inventoryin Cisco PrimeCollaboration AssuranceEnterprise mode

Add and IntegrateCUC 11.5 with CiscoPrime CollaborationAssurance inEnterprise mode


PassedGo to Device Inventory-> InventoryManagementand verify that CiscoTelePresence Server 11.5application is availableunder current inventoryin Cisco PrimeCollaboration AssuranceEnterprise mode

Add and IntegrateCisco TelePresenceServer 11.5 with CiscoPrime CollaborationAssurance inEnterprise mode


PassedGo to Device Inventory-> InventoryManagementand verify thatTelePresenceManagement Systemapplication is availableunder current inventoryin Cisco PrimeCollaboration AssuranceEnterprise mode

Add and IntegrateTelePresenceManagement Systemwith Cisco PrimeCollaborationAssurance inEnterprise mode




PassedGo to Device Inventory->InventoryManagementand verify thatTelePresence Conductorapplication is availableunder current inventoryin Cisco PrimeCollaboration AssuranceEnterprise mode

Add and IntegrateTelePresenceConductor with CiscoPrime CollaborationAssurance inEnterprise mode


PassedGo to Device Inventory-> InventoryManagementand verify that CiscoExpressway 6.0 isavailable under currentinventory in Cisco PrimeCollaboration AssuranceEnterprise mode

Add and IntegrateCisco Expressway 6.0with Cisco PrimeCollaborationAssurance inEnterprise mode


PassedGo to Cisco PrimeCollaboration AssuranceServer as Admin, throughvSphere client and verifythat user is able toupgrade from 10.6 to 11.5successfully

Upgrade Cisco PrimeCollaborationAssurance from 10.6 to11.5










PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco TelePresenceVideoCommunication Serverwhen selecting time rangeas Past 30 Minutes inCisco PrimeCollaboration AssuranceEnterprise mode

Check Collect Logs forVCS selecting timerange as Past 30Minutes - Enterprisemode


PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco TelePresenceVideoCommunication Serverafter upgrading CiscoPrime CollaborationAssurance from 11.0 to11.5 in MSP mode

Check Collect Logs forVCS after upgradingfrom 11.0 to 11.5 inMSP mode


PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco TelePresenceVideoCommunication Serverafter upgrading CiscoPrime CollaborationAssurance from 11.0 to11.5 in Enterprise mode

Check Collect Logs forVCS after upgradingfrom 11.0 to 11.5 inEnterprise mode


PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco Expressway afterupgrading Cisco PrimeCollaboration Assurancefrom 11.0 to 11.5 inEnterprise mode

Check Collect Logs forExpressway afterupgrading from 11.0 to11.5 in MSP mode




PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco TelePresenceVideoCommunication Serverwhen selecting time rangeas Past 1 hour in CiscoPrime CollaborationAssurance Enterprisemode

Check Collect Logs forVCS when selectingtime range as Past 1hour Enterprise mode


PassedGo to Diagnose ->LogCollection Center andverify whether user isable to get Warningmessage while collectinglog for CiscoTelePresence VideoCommunication Serverwhen selecting time rangeas Past 3000 Hours inCisco PrimeCollaboration AssuranceEnterprise mode

Check for Warningmessage whilecollecting log for VCSwhen selecting timerange as Past 3000Hours in Enterprisemode


PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco Expressway whenSelecting Time Zone asUTC (GMT) in CiscoPrime CollaborationAssurance Enterprisemode

Check Collect Logs forExpressway whenSelecting Time Zoneas UTC (GMT) inEnterprise mode


PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco TelePresenceVideoCommunication Serverwhen Selecting TimeZone as UTC (GMT) inCisco PrimeCollaboration AssuranceMSP mode

Check Collect Logs forVCS when SelectingTime Zone as UTC(GMT) in MSP mode




PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco Expressway whenSelecting Time Zone asUTC (GMT) and Past 30minutes in Cisco PrimeCollaboration AssuranceEnterprise mode

Check Collect Logs forExpressway whenselecting Past 30Minutes in Enterprisemode and Time zoneas UTC


PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco Expressway whenSelecting Time Zone asUTC (GMT) and Past 1hour in Cisco PrimeCollaboration AssuranceEnterprise mode

Check Collect Logs forExpressway whenselecting time range asPast 1 hour inEnterprise mode andTime zone as UTC


PassedGo to Diagnose ->LogCollection Center andverify whether user isable to get Warningmessage while collectinglog for CiscoTelePresence VideoCommunication Serverwhen selecting time rangeas Past 3000 minutes inCisco PrimeCollaboration AssuranceEnterprise mode

Check for Warningmessage whilecollecting log for VCSwhen selecting timerange as Past 3000Minutes in Enterprisemode


PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco TelePresenceVideoCommunication Serverfor past 2 hours afterupgrading Cisco PrimeCollaboration Assurancefrom 11.0 to 11.5 inEnterprise mode

Check Collect Logs forVCS for Past 2 Hoursafter upgrading from11.0 to 11.5 inEnterprise mode




PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco Expressway forpast 50 minutes afterupgrading Cisco PrimeCollaboration Assurancefrom 11.0 to 11.5 inEnterprise mode

Check Collect Logs forExpressway for Past 50Minutes mode afterupgrading from 11.0 to11.5 in Enterprisemode


PassedGo to Diagnose -> LogCollection Center andverify whether user isable to Collect Logs forCisco Emergencyresponder for past 5 hoursafter upgrading CiscoPrime CollaborationAssurance from 11.0 to11.5 in Enterprise mode

Check Collect Logs forCisco EmergencyResponder for Past 5Hours after upgradingfrom 11.0 to 11.5Enterprise mode


PassedGo to Assurance Report-> CDR & CMR Reportsand Verify whether useris able to get CallDetailed Record byselecting favorite optionin Cisco PrimeCollaboration AssuranceEnterprise mode in IE11

Check for CallDetailed Record ,byselecting CDR andCMR as Favoriteoption in Enterprisemode and IE 11


PassedGo to Assurance Report-> CDR & CMR Reportsand Verify whether useris able to get CallDetailed Record byselecting favorite optionin Cisco PrimeCollaboration AssuranceMSP Mozilla FF38

Check for CallDetailed Record , byselecting CDR andCMR as Favoriteoption in MSP modeand IE 11


PassedGo to Assurance Report-> CDR & CMR Reportsand Verify whether useris able to Get CallManagement Record inCisco PrimeCollaboration AssuranceEnterprise mode MozillaFF38

Check for CallManagement Record inMSP mode andMozilla FF38




PassedGo to Assurance Report-> CDR & CMR Reportsand Verify whether useris able to Get CallManagement Record inCisco PrimeCollaboration AssuranceMSP mode Chrome 42

Check for CallManagement Record inEnterprise mode andchrome 48


PassedGo to Device Inventory-> InventoryManagementand verify whether user isable create an new subgroup under User DefinedDevice Group in CiscoPrime CollaborationAssurance Enterprisemode

Create an new subgroup in DeviceInventory in Enterprisemode


PassedGo to Device Inventory-> InventoryManagementand verify whether user isable create an new subgroup under User DefinedDevice Group in CiscoPrime CollaborationAssurance MSP mode

Create an new subgroup in DeviceInventory in MSPmode


PassedGo to SystemAdministration -> FIPSsetup and verify whetherthe user is able to enableFIPS mode in CiscoPrime CollaborationAssurance Enterprisemode successfully

Checkwhether the useris able to enable FIPSmode in Enterprisemode

UCJ11.5PH2S.CPC-AS.G.001

PassedGo to SystemAdministration -> FIPSsetup and verify whetherthe user is able to enableFIPS mode in CiscoPrime CollaborationAssurance MSP modesuccessfully

Checkwhether the useris able to enable FIPSmode in MSP mode




PassedGo to Activate Businessdashboard and verifywhether the user is ableupgrade from standard toEssential mode in CiscoPrime CollaborationAssurance in BE6000-Mediumsuccessfully

Check whetherActivate Businessdashboard shall allowuser to upgrade fromstandard to Essentialmode in BE6000-Medium


PassedLogin to Cisco PrimeCollaboration Assuranceand verify whether theuser is unable to view theActivate Businessdashboardwhen upgradedfrom Standard toEssential mode in CiscoPrime CollaborationAssurance in BE6000-Mediumsuccessfully

Check whetherActivate Businessdashboard is notdisplayed in Essentialmode when upgradedfrom Standard in BE6000- Medium


PassedGo to SystemAdministration and verifywhether the user is unableto view the LicenseManagement dashlet inCisco PrimeCollaboration Assurancein BE 6000- Mediumsuccessfully

Checkwhether LicenseManagement dashlet isnot listed in thedropdown underSystemAdministrationdashboard in BE 6000-Medium


PassedGo to Monitor-> SystemView-> Alarm dashboardand verify whether theuser is able to view thethree applicabledashboards in CiscoPrime CollaborationAssurance Standardmodesuccessfully

Check whether thethree applicabledashboards are shownin Alarm dashboard inStandard mode


PassedGo to Monitor-> SystemView and verify whetherthe user is able to viewthe Alarm dashboard bydefault in Cisco PrimeCollaboration AssuranceStandard modesuccessfully

Check whether Alarmdashboard is selectedby default in Standardmode




PassedGo to Getting starteddashboard and verifywhether the user is ableto view the Default Pagein Cisco PrimeCollaboration Assurancefor Standard, Advancedmode and Essential modein BE 6000-Mediumsuccessfully

Checkwhether DefaultPage is displayed inGetting Starteddashboard for Standard, Advanced mode andEssential mode


PassedLogin to Cisco PrimeCollaboration Assuranceand verify whether theuser is unable to view theGetting Started Page inhome page in Cisco PrimeCollaboration AssuranceMSP mode successfully

Checkwhether GettingStarted Page is notdisplayed in MSPmode


PassedGo to Monitor-> SystemView and verify whetherCisco TelepresenceExchange tab is removedfrom System Viewdashboard in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Check whether CiscoTelepresenceExchangetab is removed fromSystem View inEnterprise mode


PassedGo to Inventory ->Inventory Managementand verify whether CiscoTelepresence Exchangeapplication option isremoved from Discoverdevices tab in CiscoPrime CollaborationAssurance MSP modesuccessfully

Check whether CiscoTelepresenceExchangeis removed fromDiscover devices tab inMSP mode


PassedGo to Inventory->Inventory Managementand verify whether theuser is able to discoverCisco Jabber for Android11.5 in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Check whether user isable to discover CiscoJabber for Android11.5 in Enterprisemode




PassedGo to Inventory->Inventory Managementand verify whether theuser is able to discoverCisco UnifiedCommunicationsManager IM & Presence11.5 in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Check whether user isable to discover CiscoUnifiedCommunicationsManager IM &Presence 11.5 inEnterprise mode


PassedGo to Inventory->Inventory Managementand verify whether theuser is able to discoverCisco TelepresenceServer 4.3 in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Check whether user isable to discover CiscoTelepresence Server4.3 in Enterprise mode


PassedGo to Inventory->Inventory Managementand verify whether theuser is able to discoverCisco TelepresenceConductor 4.2 in CiscoPrime CollaborationAssurance MSP modesuccessfully

Check whether user isable to discover CiscoTelepresenceConductor 4.2 in MSPmode


Go to Inventory->Inventory Managementand verfiy whether theuser is able to discoverCisco Unity Connection11.5 in Cisco PrimeCollaboration AssuranceMSP mode successfully

Check whether user isable to discover CiscoUnity Connection 11.5in MSP mode


PassedGo to SystemAdministration-> UserManagement and verifywhether the user is ableto view the ReportViewer option is selectedby default in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Check whether a Newuser role - ReportViewer option isselected by default inEnterprise mode




PassedGo to SystemAdministration-> UserManagement and verifywhether the user is ableto create an New user forReport Viewer role inCisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Create a new user forReport Viewer role inEnterprise mode


PassedGo to SystemAdministration-> UserManagement and verifywhether the user is unableto view Device StatusSummary tab at the topright corner in Home pagewhen logged as ReportViewer user in CiscoPrime CollaborationAssurance Enterprisemode successfully

Check whether DeviceStatus Summary tab isremoved from the topright corner in Homepage when logged asReport Viewer user inEnterprise mode


PassedGo to SystemAdministration-> UserManagement and verifywhether the user is unableto view the AlarmSummary tab at the topright corner in Home pagewhen logged as ReportViewer user in CiscoPrime CollaborationAssurance Enterprisemode successfully

Check whether AlarmSummary tab isremoved from the topright corner in Homepage when logged asReport Viewer user inEnterprise mode


PassedGo to SystemAdministration-> UserManagement and verifywhether the user is unableto view the Search tab atthe top right corner inHome page when loggedas Report Viewer user inCisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Check whether Searchtab is removed fromthe top right corner inHome page whenlogged as ReportViewer user inEnterprise mode




PassedGo to SystemAdministration-> UserManagement and verifywhether the user is unableto view the Get Advancedtab at the top right cornerin Home page whenlogged as Report Vieweruser in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Check whether GetAdvanced tab isremoved from the topright corner in Homepage when logged asReport Viewer user inEnterprise mode


PassedLogin to Cisco PrimeCollaboration Assuranceas Report Viewer userand verify whether theuser is able to view theCDR & CMR Reportspage by default in CiscoPrime CollaborationAssurance MSP modesuccessfully

Check whether ReportViewer user is able toview CDR & CMRReports page bydefault in MSP mode


PassedGo to Reports-> SessionReports and verifywhether the user is ableto view Session Reportspage when logged in asReport Viewer user inCisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Check whether ReportViewer user is able toview Session Reportsin Enterprise mode


PassedGo to Reports-> NAM &Sensor Reports and verifywhether the user is ableto view the NAM &Sensor Report page onlywhen logged in as Reportviewer user in CiscoPrime CollaborationAssurance Enterprisemode successfully

Check whether ReportViewer user is able toview NAM & SensorReports only inEnterprise mode




PassedLogin to Cisco PrimeCollaboration AssuranceServer as Admin throughvSphere client and verifythat user is able toupgrade from 10.5to 11.5in Enterprise modesuccessfully

Upgrade Cisco PrimeCollaborationAssurance from 10.5 to11.5 in Enterprisemode


PassedLogin to Cisco PrimeCollaboration AssuranceServer as Admin throughvSphere client and verifythat user is able toupgrade from 11.1 to 11.5in Enterprise modesuccessfully

Upgrade Cisco PrimeCollaborationAssurance from 11.1 to11.5 in Enterprisemode


PassedLogin to Cisco PrimeCollaboration AssuranceServer as Admin throughvSphere client and verifythat user is able toupgrade from 11.1 to 11.5in MSP modesuccessfully

Upgrade Cisco PrimeCollaborationAssurance from 11.1 to11.5 in MSP mode


PassedGo to Monitor-> Alarms& Events and verifywhether the user is ableto a view newNotification Email subjectformat in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Check whether a newNotification Emailsubject format isdisplayed in Enterprisemode


PassedGo to Alarms & ReportAdministration-> EventCustomization and verifywhether the user is ableto "Edit/Delete" theadditional text for analarm in Notes for Emailin Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Check whether user isable to "Edit/Delete"the additional text foran alarm in Notes forEmail in Enterprisemode




PassedGo to Alarms & ReportAdministration-> EventCustomization and verifywhether the user is ableto change to "Add" from"Edit/Delete" link whenan Text is deleted underNotes for Email in CiscoPrime CollaborationAssurance MSP modesuccessfully

Check whether"Edit/Delete" link ischanged to "Add" linkwhen the edited text isdeleted under Notes forEmail


PassedLogin to Cisco PrimeCollaboration Assuranceand verfiy whether theuser is able to view theNetwork HealthOverview dashboard inthe main menu inEnterprise modesuccessfully

Check for NetworkHealth Overviewdashboard inEnterprise Mode


PassedGo to Device Inventory->Inventory Managementand verify whether theuser is able to view theEndpoint Registrationstatus and the statusshould be reflected inCisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Check for EndpointRegistration status andthe status should bereflected in Enterprisemode


PassedLogin to Cisco PrimeCollaboration Assuranceand verify whether theuser is able to validate thenaming change fromAssuranceAdministrationto Alarms & ReportsAdministration dashboardin main menu inEnterprise modesuccessfully

Check whetherAssuranceAdministrationdashboard is renamedas Alarms & ReportsAdministration inEnterprise Mode




PassedLogin to Cisco PrimeCollaboration Assuranceand verify whether theuser is able to validate thenaming change fromDevice Inventory toInventory dashboard inmain menu in Enterprisemode successfully

Check whether DeviceInventory dashboard isrenamed as Inventoryin Enterprise Mode


PassedGo to Diagnosedashboard and verifywhether the user is ableto validate the namingchange from CallSignalling Analyzer toSIP Call Flow Analyzerin Cisco PrimeCollaboration AssuranceMSP mode successfully

Check whether CallSignalling Analyzerdashlet is renamed asSIP Call FlowAnalyzer in Diagnosedashboard in MSPmode


PassedGo to SystemAdministration and verfiywhether the user is ableto view Domain setupunder SystemAdministration which ismoved from Alarms &Reports Administrationdashboard in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully

Check whetherDomain setup ismovedto SystemAdministrationdashboard fromAlarms & ReportsAdministrationdashboard inEnterprise mode


PassedGo to Inventory ->Inventory Managementand verify whether theuser is able to add andintegrate the CiscoTelePresence Conductor4.3 in Cisco PrimeCollaboration AssuranceEssential mode in BE6000-Mediumsuccessfully

Add and integrate theCisco TelePresenceServer 4.3 in InventoryManagementDashboard in Essentialmode for BE6000-Medium




PassedGo to Inventory ->Inventory Managementand verify whether theuser is able to add andintegrate the CiscoExpressway X8.8 inCisco PrimeCollaboration AssuranceEssential mode in BE6000-Mediumsuccessfully

Add and integrate theCisco ExpresswayX8.8 in InventoryManagementDashboard in Essentialmode for BE6000-Medium


PassedGo to Inventory ->Inventory Managementand verify whether theuser is able to add andintegrate the Cisco UnityConnection 11.5 in CiscoPrime CollaborationAssurance Essentialmodein BE 6000-Mediumsuccessfully

Add and integrate theCisco UnityConnection 11.5 inInventoryManagementDashboard Essentialmode for BE6000-Medium


PassedGo to Inventory ->Inventory Managementand verify whether theuser is able to add andintegrate the CiscoTelepresence ConductorXC4.2 in Cisco PrimeCollaboration AssuranceEssential mode in BE6000-Mediumsuccessfully

Add and integrate theCisco TelepresenceConductor XC4.2 inInventoryManagementDashboard Essentialmode for BE6000-Medium


PassedGo to Inventory ->Inventory Managementand verify whether theuser is able to add andintegrate the Cisco PrimeLicense Manager 11.5 inCisco PrimeCollaboration AssuranceEssential mode in BE6000-Mediumsuccessfully

Add and integrate theCisco Prime LicenseManager 11.5 inInventoryManagementDashboard Essentialmode for BE6000-Medium




PassedGo to Monitor->UtilizationMonitor andverfiy whether the user isable to view theConferencing devices inConferencing devices tabwhen Cisco TelePresenceServer in managed inEssential mode for BE6000-Mediumsuccessfully

Check WhetherConferencing Devicesare displayed inUtilization Monitordashboard when CiscoTelePresence Server inmanaged in Essentialmode for BE6000-Medium


PassedGo to Monitor->UtilizationMonitor andverfiy whether the user isable to navigate to theCisco TelePresenceServer GUI inConferencing devices tabwhen when the IPAddress link is selectedin Essential mode for BE6000-Mediumsuccessfully

Check whether thepage is navigated toCisco TelePresenceServer GUI when theIP Address link isselected inConferencing devicestab in UtilizationMonitor dashboard inEssential mode for BE6000-Medium


PassedGo to Inventory > DeviceStatus Summary andverify whether the user isable to view the DeviceStatus for the devices inManaged state inEssential mode for BE6000-Mediumsuccessfully

Check Whether theDevice status aredisplayed in DeviceStatus Summarydashboard for thedevices in Managedstate in Essential modefor BE 6000-Medium


Cisco Prime Collaboration ProvisioningDefectsStatusDescriptionTitleLogical ID

PassedGo to Device Setup andverify that user is able toview Licensed UnifiedCommunications Managercount as 1 and add to CiscoPrime CollaborationProvisioning successfullywhile using StandardMode

Licensed UnifiedCommunicationsManager count underPrime CollaborationProvisioning Capacitydashboard while usingStandard mode of PCP

UCJ11.5S.CPC-PR.G.001


Test Results SummaryCisco Prime Collaboration Provisioning

PassedGo to Device Setup andverify that user is able toview Licensed UnifiedMessage Processors countas 1 and add to Cisco PrimeCollaboration Provisioningsuccessfully while usingStandard Mode

Licensed UnifiedMessage Processorscount under PrimeCollaborationProvisioning Capacitydashboard while usingStandard mode of PCP


PassedGo to Device Setup andverify that user is able toview Licensed UnifiedPresence count as 1 and addto Cisco PrimeCollaboration Provisioningsuccessfully while usingStandard Mode

Licensed UnifiedPresence count underPrime CollaborationProvisioning Capacitydashboard while usingStandard mode of PCP


PassedGo to Device Setup andverify that user is able toview Licensed UnifiedCommunications Managercount as 200 and add CiscoUnified CommunicationsManager to Cisco PrimeCollaboration Provisioningsuccessfully while usingAdvanced Mode

Licensed UnifiedCommunicationsManager count underPrime CollaborationProvisioning Capacitydashboard while usingAdvanced mode of PCP


PassedGo to Device Setup andverify that user is able toview Licensed UnifiedMessage Processors countas 200 and add Cisco UnityConnection to Cisco PrimeCollaboration Provisioningsuccessfully while usingAdvanced Mode

Licensed UnifiedMessage Processorscount under PrimeCollaborationProvisioning Capacitydashboard while usingAdvanced mode of PCP


PassedGo to Device Setup andverify that user is able toview Licensed UnifiedPresence count as 200 andadd Cisco UnifiedCommunications ManagerIM and Presence to CiscoPrime CollaborationProvisioning successfullywhile using AdvancedMode

Licensed UnifiedPresence count underPrime CollaborationProvisioning Capacitydashboard while usingAdvanced mode of PCP




PassedGo to Device Setup andverify that user is able toview Licensed UnifiedCommunications Managercount as 5 and add to CiscoPrime CollaborationProvisioning successfullywhile using Eval Mode

Licensed UnifiedCommunicationsManager count underPrime CollaborationProvisioning Capacitydashboard while usingEval mode of PCP


PassedGo to Device Setup andverify that user is able toview Licensed UnifiedMessage Processors countas 5 and add to Cisco PrimeCollaboration Provisioningsuccessfully while usingEval Mode

Licensed UnifiedMessage Processorscount under PrimeCollaborationProvisioning Capacitydashboard while usingEval mode of PCP


PassedGo to Device Setup andverify that user is able toview Licensed UnifiedPresence count as 5 and addto Cisco PrimeCollaboration Provisioningsuccessfully while usingEval Mode

Licensed UnifiedPresence count underPrime CollaborationProvisioning Capacitydashboard while usingEval mode of PCP


PassedGo to Device Setup andverify that user is able toview the respective errormessage indication whileadding already existedCisco UnifiedCommunications Manager11.5 to Cisco PrimeCollaboration Provisioning

Error message indicationwhile adding alreadyexisted Cisco UnifiedCommunicationsManager 11.5 to PCPusing Device Setup


PassedGo to Device Setup andverify that user is able toview the respective errormessage indication whileadding already existedCisco Unity Connection11.5 to Cisco PrimeCollaboration Provisioning

Error message indicationwhile adding alreadyexisted Cisco UnityConnection 11.5 to PCPusing Device Setup




PassedGo to Device Setup andverify that user is able toview the respective errormessage indication whileadding already existedUnified CommunicationsManager IM and Presence11.5 to Cisco PrimeCollaboration Provisioning

Error message indicationwhile adding alreadyexisted Unified CM IMand Presence 11.5 to PCPusing Device Setup


PassedGo to Device Setup andverify that user is able toview the respective errormessage indication whileadding Cisco UnifiedCommunications Manager11.5 to Cisco PrimeCollaboration Provisioningwhen License gets expired

Error message indicationwhile adding CiscoUnified CommunicationsManager 11.5 to PCPusing Device Setup whenLicense gets expired


PassedGo to Device Setup andverify that user is able toview the respective errormessage indication whileadding Cisco UnityConnection 11.5 to CiscoPrime CollaborationProvisioning using DeviceSetup when License getsexpired

Error message indicationwhile adding UnityConnection 11.5 to PCPusing Device Setup whenLicense gets expired


PassedGo to Device Setup andverify that user is able toview the respective errormessage indication whileadding Cisco UnifiedCommunications ManagerIM and Presence 11.5 toCisco Prime CollaborationProvisioning using DeviceSetup when License getsexpired

Error message indicationwhile addingUnified CMIM and Presence 11.5 toPCP using Device Setupwhen License getsexpired


PassedGo to Infrastructure Setup-> Configuration Templatesand verify that user is ableto create the Phone ButtonTemplate for DND Featureand view at specified CiscoUnified CommunicationsManager Web GUI

Create Phone ButtonTemplate for DNDFeature to the respectiveCall Processor usingConfiguration Templatestab




PassedGo to Infrastructure Setup-> Configuration Templatesand verify that user is ableto create the Phone ButtonTemplate for Forward AllFeature and view atspecified Cisco UnifiedCommunications ManagerWeb GUI

Create Phone ButtonTemplate for ForwardAllFeature to the respectiveCall Processor usingConfiguration Templatestab


PassedGo to Infrastructure Setup-> Configuration Templatesand verify that user is ableto create the Phone ButtonTemplate for Call ParkFeature and view atspecified Cisco UnifiedCommunications ManagerWeb GUI

Create Phone ButtonTemplate for Call ParkFeature to the respectiveCall Processor usingConfiguration Templatestab


PassedGo to Infrastructure Setup-> Configuration Templatesand verify that user is ableto create the Phone ButtonTemplate for Call BackFeature and view atspecified Cisco UnifiedCommunications ManagerWeb GUI

Create Phone ButtonTemplate for Call BackFeature to the respectiveCall Processor usingConfiguration Templatestab


PassedGo to Infrastructure Setup-> Configuration Templatesand verify that user is ableto create the Phone ButtonTemplate for Call pickupFeature and view atspecified Cisco UnifiedCommunications ManagerWeb GUI

Create Phone ButtonTemplate for Call pickupFeature to the respectiveCall Processor usingConfiguration Templatestab


PassedGo to Administration ->Process Management andverify that user is able torestart Apache (WebServer) successfully

Restart Apache Serverthrough ProcessManagement


PassedGo to Administration->Process Management andverify that user is able torestart JBOSS (ApplicationServer) successfully

Restart JBOSS Serverthrough ProcessManagement




PassedGo to Administration ->Process Management andverify that user is able torestart NICE(Configuration Engine)Service successfully

Restart NICE Servicethrough ProcessManagement


PassedGo to Administration ->Process Management andverify that user is able viewthe respective messagenotification while restartApache(Web Server)successfully

Message notificationwhile restart ApacheServer through ProcessManagement


PassedGo to Administration ->Process Management andverify that user is able viewthe respective messagenotification while restartJBOSS (ApplicationServer) successfully

Message notificationwhile restart JBOSSServer through ProcessManagement


PassedGo to Administration ->Process Management andverify that user is able viewthe respective messagenotification while restartNICE (ConfigurationEngine) Servicesuccessfully

Message notificationwhile restart NICEService through ProcessManagement


PassedGo to Administration ->Process Management andverify that user is able toreboot Cisco PrimeCollaboration ProvisioningServer successfully

Reboot Cisco PrimeCollaborationProvisioning Serverthrough ProcessManagement


PassedGo to Administration ->Process Management andverify that user is able viewthe respective messagenotification while rebootCisco Prime CollaborationProvisioning Serversuccessfully

Message notificationwhile reboot Cisco PrimeCollaborationProvisioning Serverthrough ProcessManagement




PassedGo to Administration->Process Management andverify that user is able torestart All Processes(Postgres, Apache (WebServer), JBOSS(Application Server), NICE(Configuration Engine)) atthe same time successfully

Restart All Processes(Postgres, Apache (WebServer), JBOSS(Application Server),NICE (ConfigurationEngine)) at the same timethrough ProcessManagement


PassedGo to Administration->Process Management andverify that user is able toview the respectivemessage notification whilerestart All Processes(Postgres, Apache (WebServer), JBOSS(Application Server), NICE(Configuration Engine)) atthe same time successfully

Message notificationwhile restart AllProcesses (Postgres,Apache (Web Server),JBOSS (ApplicationServer), NICE(Configuration Engine))at the same time throughProcess Management


PassedGo to Administration ->Process Management andverify that user is able toview the status as runningand correct up time forPostgres Service throughCisco Prime CollaborationProvisioning successfully

Status and Up Time forPostgres Service placedunder ProcessManagement using PCP


PassedGo to Administration ->Process Management andverify that user is able toview the status as runningand correct up time forApache (Web Server)through Cisco PrimeCollaboration Provisioningsuccessfully

Status and Up Time forApache (Web Server)placed under ProcessManagement using PCP


PassedGo to Administration ->Process Management andverify that user is able toview the status as runningand correct up time forJBOSS (ApplicationServer) through CiscoPrime CollaborationProvisioning successfully

Status and Up Time forJBOSS (ApplicationServer) placed underProcess Managementusing PCP




PassedGo to Administration ->Process Management andverify that user is able toview the status as runningand correct up time forNICE (ConfigurationEngine) Service throughCisco Prime CollaborationProvisioning successfully

Status and Up Time forNICE (ConfigurationEngine) Service placedunder ProcessManagement using PCP


PassedGo to Administration ->Process Management andverify that user is able tocreate Manage PresetFilters for Process Nameand search ProcessManagement Historydetails based on the Processname successfully

Create Manage PresetFilters for Process Nameto search ProcessManagement Historydetails


PassedGo to Administration ->Process Management andverify that user is able tocreate Manage PresetFilters for Reason andsearch ProcessManagement Historydetails based on the Reasonsuccessfully

Create Manage PresetFilters for Reason tosearch ProcessManagement Historydetails


PassedGo to Administration ->Process Management andverify that user is able tocreate Manage PresetFilters for Restart Date andsearch ProcessManagement Historydetails based on the RestartDate successfully

Create Manage PresetFilters for Restart Date tosearch ProcessManagement Historydetails


PassedGo to Administration ->Process Management andverify that user is able tocreate Manage PresetFilters for User and searchProcess ManagementHistory details based on theUser successfully

Create Manage PresetFilters for User to searchProcess ManagementHistory details




PassedGo to Administration ->Process Management andverify that user is able todelete Manage PresetFilters which is created forUser to search ProcessManagement Historydetails successfully

Delete Manage PresetFilters which is createdfor User to searchProcess ManagementHistory details


PassedGo to Administration ->Process Management andverify that user is able todelete Manage PresetFilters which is created forProcess Name to searchProcess ManagementHistory details successfully

Delete Manage PresetFilters which is createdfor Process Name tosearch ProcessManagement Historydetails


PassedGo to Reports -> DirectoryNumber Inventory andverify that user is able togenerate Directory NumberInventory Report and checkall the Directory Numbersknown by Cisco PrimeCollaboration Provisioningare available in the Report

Generate and view all theDNs known by PCP areavailable in DirectoryNumber InventoryReport


PassedGo to Reports -> DirectoryNumber Inventory andverify that user is able togenerate Directory NumberInventory Report and check"status of the DirectoryNumbers as unassigned"details are available in theReport

Generate and view"status of the DirectoryNumbers as unassigned"details are available inDirectory NumberInventory Report


PassedGo to Reports -> DirectoryNumber Inventory andverify that user is able togenerate Directory NumberInventory Report and check"status of the DirectoryNumbers as assigned"details are available in theReport

Generate and view"status of the DirectoryNumbers as assigned"details are available inDirectory NumberInventory Report




PassedGo to Reports -> DirectoryNumber Inventory andverify that user is able togenerate Directory NumberInventory Report and check"status of the DirectoryNumbers as reserved"details are available in theReport

Generate and view"status of the DirectoryNumbers as reserved"details are available inDirectory NumberInventory Report


PassedGo to User Provisioningand verify that user is ableto check all the associatedServices are getting deletedwhen deleting the local userthrough Cisco PrimeCollaboration Provisioningsuccessfully

Check all the associatedServices are gettingdeleted when trying todelete local user fromUser Provisioning page


PassedGo to User Provisioningand verify that user is ableto check all the associatedServices are getting deletedwhen deleting CiscoUnified CommunicationsManager Imported userthrough Cisco PrimeCollaboration Provisioningsuccessfully

Check all the associatedServices are gettingdeleted when trying todelete user imported fromUnified CM using UserProvisioning page


PassedGo to User Provisioningand verify that user is ableto check all the associatedServices are getting deletedwhen deleting LDAPImported user throughCisco Prime CollaborationProvisioning successfully

Check all the associatedServices are gettingdeleted when trying todelete LDAP Importeduser using UserProvisioning page


PassedGo to User Provisioningand verify that user is ableto check all the associatedServices are getting deletedwhen deleting JapaneseUser ID through CiscoPrime CollaborationProvisioning successfully

Check all the associatedServices are gettingdeleted when trying todelete Japanese User IDusing User Provisioningpage


PassedVerify that user is able toupgrade Cisco PrimeCollaboration Provisioningfrom 10.6 to 11.5successfully

Upgrade PCPProvisioning from 10.6to 11.5





Upgrade PCPProvisioning from 11.0to 11.5


PassedVerify that user is able toinstall Cisco PrimeCollaboration Provisioning11.5 after skip installing ofRoot Package successfully

Skip installing of Rootpackage while installingCisco PrimeCollaborationProvisioning 11.5


PassedVerify that user is able toskip "asking for the Rootpassword option" whileinstalling Cisco PrimeCollaboration Provisioning11.5 successfully

Skip "asking for the Rootpassword option" whileinstalling Cisco PrimeCollaborationProvisioning 11.5


PassedVerify that user is able toview root package getsremoved after upgradeCisco Prime CollaborationProvisioning from 10.6 to11.5 successfully

View the root packageafter upgrade CiscoPrime CollaborationProvisioning from 10.6to 11.5


PassedVerify that user is unableto access file system usingRoot credentials afterupgrade Cisco PrimeCollaboration Provisioningfrom 10.6 to 11.5successfully

"Disable the root accessto file system" afterupgrade Cisco PrimeCollaborationProvisioning from 10.6to 11.5


PassedVerify that user is able toview root package getsremoved after upgradeCisco Prime CollaborationProvisioning from 11.0 to11.5 successfully

View the root packageafter upgrade CiscoPrime CollaborationProvisioning from 11.0to 11.5


PassedVerify that user is unableto access file system usingRoot credentials afterupgrade Cisco PrimeCollaboration Provisioningfrom 11.0 to 11.5successfully

"Disable the root accessto file system" afterupgrade Cisco PrimeCollaborationProvisioning from 11.0to 11.5




PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllCall Processors withSynchronization option as"Force DomainSynchronization" and checkthe results successfully

ScheduleSynchronization for AllCall Processors withSynchronization optionas "Force DomainSynchronization"


PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllCall Processors withSynchronization option as"Run devicesynchronization in parallel"and check the resultssuccessfully

ScheduleSynchronization for AllCall Processors withSynchronization optionas "Run devicesynchronization inparallel"


PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllCall Processors withSynchronization option as"Abort synchronization ondevice synchronizationfailure" and check theresults successfully

ScheduleSynchronization for AllCall Processors withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"


PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllMessage Processors withSynchronization option as"Force DomainSynchronization" and checkthe results successfully

ScheduleSynchronization for AllMessage Processors withSynchronization optionas "Force DomainSynchronization"




PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllMessage Processors withSynchronization option as"Run devicesynchronization in parallel"and check the resultssuccessfully

ScheduleSynchronization for AllMessage Processors withSynchronization optionas "Run devicesynchronization inparallel"


PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllMessage Processors withSynchronization option as"Abort synchronization ondevice synchronizationfailure" and check theresults successfully

ScheduleSynchronization for AllMessage Processors withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"


PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllPresence Processors withSynchronization option as"Force DomainSynchronization" and checkthe results successfully

ScheduleSynchronization for AllPresence Processors withSynchronization optionas "Force DomainSynchronization"


PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllPresence Processors withSynchronization option as"Run devicesynchronization in parallel"and check the resultssuccessfully

ScheduleSynchronization for AllPresence Processors withSynchronization optionas "Run devicesynchronization inparallel"




PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllPresence Processors withSynchronization option as"Abort synchronization ondevice synchronizationfailure" and check theresults successfully

ScheduleSynchronization for AllPresence Processors withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"


PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllLDAPs withSynchronization option as"Force DomainSynchronization" and checkthe results successfully

ScheduleSynchronization for AllLDAPs withSynchronization optionas "Force DomainSynchronization"


PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllLDAPs withSynchronization option as"Run devicesynchronization in parallel"and check the resultssuccessfully

ScheduleSynchronization for AllLDAPs withSynchronization optionas "Run devicesynchronization inparallel"


PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllLDAPs withSynchronization option as"Abort synchronization ondevice synchronizationfailure" and check theresults successfully

ScheduleSynchronization for AllLDAPs withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"




PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllDomains withSynchronization option as"Force DomainSynchronization" and checkthe results successfully

ScheduleSynchronization for AllDomains withSynchronization optionas "Force DomainSynchronization"


PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllDomains withSynchronization option as"Run devicesynchronization in parallel"and check the resultssuccessfully

ScheduleSynchronization for AllDomains withSynchronization optionas "Run devicesynchronization inparallel"


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to updateAlerting Name for HuntPilot through Batch filesuccessfully

Update Alerting Namefor Hunt Pilot throughBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to updateASCII Alerting Name forHunt Pilot through Batchfile successfully

Update ASCII AlertingName for Hunt Pilotthrough Batch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to updateVoicemail Destinationsettings for Hunt Pilotthrough Batch filesuccessfully

Update VoicemailDestination settings forHunt Pilot through Batchfile


PassedGo to User Provisioningand verify that user is ableto create CustomADFieldsfor LDAP Sync UsersSuccessfully

Create CustomADFieldsfor LDAP Sync Users




PassedGo to User Provisioningand verify that user is ableto Modify Custom ADFields for LDAP SyncUsers Successfully

Modify Custom ADFields for LDAP SyncUsers


PassedGo to User Provisioningand verify that user is ableto delete CustomADFieldsfor LDAP Sync UsersSuccessfully

Delete CustomADFieldsfor LDAP Sync Users


CSCux33247FailedVerify that user is able toview Cisco PrimeCollaboration Provisioninglogin page version as 11.5after interim Upgrade inJapanese Environmentsuccessfully

Version Status afterupgraded CPCProvisioning 11.5 inJapanese Environment


PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatclicking on 'change' fromquick view hasprepopulated values forservice templates,Extension Mobility phonetype, protocol and phonebutton template attributesfrom Extension Mobilityaccess service template inCisco Prime CollaborationProvisioning Successfully

In 'change' from quickview, service templateattributes values areprepopulated from EMaccess service template


PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatclicking on 'change' fromquick view hasprepopulated values forservice templates,Extension Mobility phonetype, protocol and phonebutton template attributesfrom Extension Mobilityaccess service templatewhen there is more thanone Extension Mobilityaccess service template inCisco Prime CollaborationProvisioning Successfully

In 'change' from quickview, service templateattributes values areprepopulated from EMaccess service templatewhen there is more thanone EM access servicetemplate




PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatwhile ordering ExtensionMobility Access aftercreating new user,Extension Mobility phonetype, protocol and phonebutton template attributesare prepopulated from onlyone Extension Mobilityaccess service template inCisco Prime CollaborationProvisioning Successfully

Check while orderingEMAccess after creatingnew user, attributes areprepopulated from onlyone EM access servicetemplate


PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatduring auto-provisioning,Extension Mobility phonetype is updated with thephone model selected inUser Role page in CiscoPrime CollaborationProvisioning Successfully

Verify duringauto-provisioning, EMphone type is updatedwith the phone modelselected in User Rolepage


PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatduring quick-provisioning,Extension Mobility phonetype is updated with thephone model selected inUser Role page in CiscoPrime CollaborationProvisioning Successfully

Verify duringquick-provisioning, EMphone type is updatedwith the phone modelselected in User Rolepage


PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatclicking on 'View' fromquick view hasprepopulated values forservice templates,Extension Mobility phonetype, protocol and phonebutton template attributesfrom Extension Mobilityaccess service template inCisco Prime CollaborationProvisioning Successfully

In 'View' from quickview, service templateattributes values areprepopulated from EMaccess service template




PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatuser is able to checkUniversal phonemodel hasthe Protocols SIP, SCCPand Either and phonebutton template attribute isnot displayed for ExtensionMobility Access ServiceTemplate in Cisco PrimeCollaboration ProvisioningSuccessfully

Verify Universal phonemodel has the Protocolsand no "phone buttontemplate attribute"displayed in EM AccessService Template


PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatuser is able to check theUniversal Phone Templateis populated in Endpointmodel while ExtensionMobility Access Servicetemplate creation in CiscoPrime CollaborationProvisioning Successfully

Verify Universal PhoneTemplate is populated inEndpoint model whileEM Access Servicetemplate creation


PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatuser is able to checkUniversal phone modeladded in the servicetemplate assignment tableunder User roles page inCisco Prime CollaborationProvisioning Successfully

Verify service templateassignment table hasUniversal phone model




PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify that oncreation of ExtensionMobility Access Servicetemplate, ExtensionMobility phone type withphone list values, Protocoland Phone Button templateattributes are displayedunder ProvisioningAttributes -> BasicExtensionMobility AccessInformation in Cisco PrimeCollaboration ProvisioningSuccessfully

Creation of EM AccessService templateattributes are displayedunder ProvisioningAttributes -> BasicExtension MobilityAccess Information


PassedGo to Device Setup andverify that user is able toAdd Cisco UnifiedComminications Managerwith 'Synchronization andAuthentication' in CiscoPrime CollaborationProvisioning by integratingLightweight DirectoryAccess Protocol to CiscoUnified ComminicationsManager Successfully

Add Unified CM with'Synchronization andAuthentication' byintegrating LDAP toUnified CM


PassedGo to Device Setup andverify that user is able toAdd Cisco UnifiedComminications Managerwith 'Synchronization' inCisco Prime CollaborationProvisioning by integratingLightweight DirectoryAccess Protocol to CiscoUnified ComminicationsManager Successfully

Add Unified CM with'Synchronization' byintegrating LDAP toUnified CM




PassedGo to Device Setup andverify that user is ableassign few authorizationrole for user synced fromLightweight DirectoryAccess Protocol and loginto Cisco PrimeCollaboration Provisioningwith sync user and checkcorresponding megamenuis listing successfully

Assign few authorizationrole for user synced fromLDAP and login withsync user and checkcorrespondingmegamenuis listing


PassedGo to Device Setup andverify that user is able tocheck the proper errormessage while givinginvalid credentials forLightweight DirectoryAccess Protocol in CiscoPrime CollaborationProvisioning Successfully

Check for invalidcredentials is showingproper error message forLDAP


PassedGo to Device Setup andverify that user is able tocheck the domainintegrated with OpenLightweight DirectoryAccess Protocol is showingin the import user page inCisco Prime CollaborationProvisioning successfully

Check the domainintegrated withOpenLDAP is showingin the import user page


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file to addDistribution list fromCiscoPrime CollaborationProvisioning to CiscoUnityConnection successfully

Add and schedule a batchfile to add Distributionlist in Cisco UnityConnection


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange Distribution listfrom Cisco PrimeCollaboration Provisioningto Cisco Unity Connectionsuccessfully

Add and schedule a batchfile to changeDistribution list in CiscoUnity Connection




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tocancel Distribution listfrom Cisco PrimeCollaboration Provisioningto Cisco Unity Connectionsuccessfully

Add and schedule a batchfile to cancel Distributionlist in Cisco UnityConnection


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file to addDirectory Handler fromCisco Prime CollaborationProvisioning successfully

Add and schedule a batchfile to add DirectoryHandler


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange Directory Handlerfrom Cisco PrimeCollaboration Provisioningsuccessfully

Add and schedule a batchfile to change DirectoryHandler


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tocancel Directory Handlerfrom Cisco PrimeCollaboration Provisioningsuccessfully

Add and schedule a batchfile to cancel DirectoryHandler


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file to addCall Handler from CiscoPrime CollaborationProvisioning successfully

Add and schedule a batchfile to Add Call Handler




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tocancel Call Handler fromCisco Prime CollaborationProvisioning successfully

Add and schedule a batchfile to Cancel CallHandler


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange Call HandlerGreeting from Cisco PrimeCollaboration Provisioningsuccessfully

Add and schedule a batchfile to Change CallHandler Greeting


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file to addRoute Partition from CiscoPrime CollaborationProvisioning to CiscoUnityConnection successfully

Add and schedule a batchfile to add Route Partition


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange Route Partitionfrom Cisco PrimeCollaboration Provisioningto Cisco Unity Connectionsuccessfully

Add and schedule a batchfile to change RoutePartition


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file to addUser Role from CiscoPrime CollaborationProvisioning successfully

Add and schedule a batchfile to Add User Role




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange User Role fromCisco Prime CollaborationProvisioning successfully

Add and schedule a batchfile to Change User Role


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file todelete User Role fromCisco Prime CollaborationProvisioning successfully

Add and schedule a batchfile to Delete User Role


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange User withAdditional Settings fromCisco Prime CollaborationProvisioning successfully

Add and schedule a batchfile to Change User withAdditional Settings


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange User Servicesservice template fromCiscoPrime CollaborationProvisioning to CiscoUnityConnection successfully

Add and schedule a batchfile to change UserServices service template


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tocancel User Servicesservice template fromCiscoPrime CollaborationProvisioning to CiscoUnityConnection successfully

Add and schedule a batchfile to cancel UserServices service template




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file to addSubscriber Template fromCisco Prime CollaborationProvisioning successfully

Add and schedule a batchfile to add SubscriberTemplate


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange SubscriberTemplate fromCisco PrimeCollaboration Provisioningsuccessfully

Add and schedule a batchfile to change SubscriberTemplate


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tocancel Subscriber Templatefrom Cisco PrimeCollaboration Provisioningsuccessfully

Add and schedule a batchfile to cancel SubscriberTemplate


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file to addLocation fromCisco PrimeCollaboration Provisioningsuccessfully

Add and schedule a batchfile to Add Location


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange Location fromCisco Prime CollaborationProvisioning successfully

Add and schedule a batchfile to Change Location




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tocancel Location fromCiscoPrime CollaborationProvisioning successfully

Add and schedule a batchfile to Cancel Location


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange Physical Locationfrom Cisco PrimeCollaboration Provisioningsuccessfully

Add and schedule a batchfile to Change PhysicalLocation



Upgrade Cisco PrimeCollaborationProvisioning from 11.0to 11.2



Upgrade Cisco PrimeCollaborationProvisioning from 11.1to 11.2


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCiscoCallManager Servicein Cisco UnifiedCommunications ManagerServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Activating Cisco CallManager Service inUnified CMServiceability page usingBatch file




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco Call ManagerService in Cisco UnifiedCommunications ManagerServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Deactivating Cisco CallManager Service inUnified CMServiceability page usingBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCiscoCTIManager Servicein Cisco UnifiedCommunications ManagerServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Activating Cisco CTIManager Service inUnified CMServiceability page usingBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco CTI ManagerService in Cisco UnifiedCommunications ManagerServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Deactivating Cisco CTIManager Service inUnified CMServiceability page usingBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco CallManager SNMPService in Cisco UnifiedCommunications ManagerSNMP Serviceability pageusing Batch Provisioningthrough Cisco PrimeCollaboration Provisioningsuccessfully

Activating Cisco CallManager SNMP Servicein Unified CMServiceability page usingBatch file




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco Call ManagerSNMP Service in CiscoUnified CommunicationsManager Serviceabilitypage using BatchProvisioning through CiscoPrime CollaborationProvisioning successfully

Deactivating Cisco CallManager SNMP Servicein Unified CMServiceability page usingBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco AXLWeb Service inCisco UnifiedCommunications ManagerServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Activating Cisco AXLWeb Service in UnifiedCM Serviceability pageusing Batch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco AXL WebService in Cisco UnifiedCommunications ManagerServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Deactivating Cisco AXLWeb Service in UnifiedCM Serviceability pageusing Batch files


PassedLogin as AdministratorUser and verify that user isable to access UserProvisioning in CiscoPrime CollaborationProvisioning successfully

Accessing UserProvisioning Page bylogging in asAdministrator


PassedGo to User Provisioningand verify thatAdministrator user is ableto add an user in CiscoPrime CollaborationProvisioning successfully

Access Control to add anuser in User Provisioningpage by logging in asAdministrator




PassedGo to User Provisioningand verify thatAdministrator user is ableto delete an user in CiscoPrime CollaborationProvisioning successfully

Access Control to deletean user in UserProvisioning page bylogging in asAdministrator


PassedLogin as Order AccessUser and verify that user isable to access UserProvisioning in CiscoPrime CollaborationProvisioning successfully

Accessing UserProvisioning Page bylogging in as OrderAccess User


PassedGo to User Provisioningand verify that OrderAccess user is able to adduser in Cisco PrimeCollaboration Provisioningsuccessfully

Access Control to add anuser in User Provisioningpage by logging in asOrder Access User


Go to User Provisioningand verify that OrderAccess user is able to deletean user in Cisco PrimeCollaboration Provisioningsuccessfully

Access Control forDelete an user in UserProvisioning page bylogging in as OrderAccess User


PassedLogin asMaintenance Userand verify that UserProvisioning page isunavailable in Cisco PrimeCollaboration Provisioningsuccessfully

Restriction of accessingUser Provisioning pagefor Maintenance User


PassedLogin as Approval Userand verify that UserProvisioning page isunavailable in Cisco PrimeCollaboration Provisioningsuccessfully

Restriction of accessingUser Provisioning pagefor Approval User


PassedLogin as Assignment Userand verify that UserProvisioning page isunavailable in Cisco PrimeCollaboration Provisioningsuccessfully

Restriction of accessingUser Provisioning pagefor Assignment User




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco AXLWeb Service inCisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Activating Cisco AXLWeb Service in UnifiedCM IM & PresenceServiceability page usingBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco AXL WebService in Cisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Deactivating Cisco AXLWeb Service in UnifiedCM IM & PresenceServiceability page usingBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco SIP Proxy Service inCisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Activating Cisco SIPProxy Service in UnifiedCM IM & PresenceServiceability page usingBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco SIP ProxyService in Cisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Deactivating Cisco SIPProxy Service in UnifiedCM IM & PresenceServiceability page usingBatch file




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco XCP ConnectionManager Service in CiscoUnified CommunicationsManager IM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Activating Cisco XCPConnection ManagerService in Unified CMIM & PresenceServiceability page usingBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco XCP ConnectionManager Service in CiscoUnified CommunicationsManager IM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Deactivating Cisco XCPConnection ManagerService in Unified CMIM & PresenceServiceability page usingBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco XCP AuthenticationService in Cisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Activating Cisco XCPAuthentication Service inUnified CM IM &Presence Serviceabilitypage using Batch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco XCPAuthentication Service inCisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Deactivating Cisco XCPAuthentication Service inUnified CM IM &Presence Serviceabilitypage using Batch file




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco XCP TextConference ManagerService in Cisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Activating Cisco XCPText ConferenceManager Service inUnified CM IM &Presence Serviceabilitypage using Batch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco XCP TextConference ManagerService in Cisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Deactivating Cisco XCPText ConferenceManager Service inUnified CM IM &Presence Serviceabilitypage using Batch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco Presence EngineService in Cisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Activating CiscoPresence Engine Servicein Unified CM IM &Presence Serviceabilitypage using Batch file




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco Presence EngineService in Cisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Deactivating CiscoPresence Engine Servicein Unified CM IM &Presence Serviceabilitypage using Batch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser can enable the CiscoCamera in Cisco UnifiedCommunications ManagerEnterprise PhoneConfiguration page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Enabling Cisco Camerain Unified CMEnterprisePhone Configurationpage using Batch files


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser can disable the CiscoCamera in Cisco UnifiedCommunications ManagerEnterprise PhoneConfiguration page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Disabling Cisco Camerain Unified CMEnterprisePhone Configurationpage using Batch files


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser can enable RTCP inCisco UnifiedCommunications ManagerEnterprise PhoneConfiguration page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Enabling RTCP inUnified CM EnterprisePhone Configurationpage using Batch files




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser can disable RTCP inCisco UnifiedCommunications ManagerEnterprise PhoneConfiguration page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully

Disabling RTCP inUnified CM EnterprisePhone Configurationpage using Batch files


PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto cancel the ScheduleSynchronization for AllCall Processors withSynchronization option as"Abort synchronization ondevice synchronizationfailure" and check theresults in Cisco PrimeCollaboration Provisioningsuccessfully

Cancelling of ScheduleSynchronization for AllCall Processors withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"


PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto cancel the ScheduleSynchronization for AllMessage Processors withSynchronization option as" Force Domainsynchronization " andcheck the results in CiscoPrime CollaborationProvisioning successfully

Cancelling of ScheduleSynchronization for AllMessage Processors withSynchronization optionas "Force Domainsynchronization"


PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto cancel the ScheduleSynchronization for AllPresence Processors withSynchronization option as"Run devicesynchronization in Parallel"and check the results inCisco Prime CollaborationProvisioning successfully

Cancelling of ScheduleSynchronization for AllPresence Processors withSynchronization optionas "Run devicesynchronization inParallel"




PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto cancel the ScheduleSynchronization for AllLDAPs Processors withSynchronization option as"Run devicesynchronization in Parallel"and check the results inCisco Prime CollaborationProvisioning successfully

Cancelling of ScheduleSynchronization for AllLDAP Processors withSynchronization optionas "Run devicesynchronization inParallel"


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Add Batchthat supports the ExtensionMobility Access Templateto check the forward andbackward truncation inkeyword functionality isimplemented for thesupported attributes whileordering in Cisco PrimeCollaboration Provisioningsuccessfully

Add Batch that supportsthe EM Access Templateto check the forward andbackward truncation inkeyword functionality isimplemented for thesupported attributeswhileordering


PassedGo to Advancedprovisioning -> BatchProvisioning and verify thatuser is able to Add Batchthat supports the PhoneTemplate to check theforward and backwardtruncation in keywordfunctionality isimplemented for thesupported attributes whileordering in Cisco PrimeCollaboration Provisioningsuccessfully

Add Batch that supportsthe Phone Template tocheck the forward andbackward truncation inkeyword functionality isimplemented for thesupported attributeswhileordering




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Show Line LabelSettings to TRUE usingEnterprise Parameter Batchfile in Cisco PrimeCollaboration Provisioningsuccessfully

Update and check ShowLine Label Settingschange for EnterpriseParameter through Batchfile


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Show Ring Settingsto FALSE using EnterpriseParameter Batch file inCisco Prime CollaborationProvisioning successfully

Update and check ShowRing Settings change forEnterprise Parameterthrough Batch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Busy lamp Fieldusing Call Lists to Enabledusing Enterprise ParameterBatch file in Cisco PrimeCollaboration Provisioningsuccessfully

Update and check BLFFor Call Lists change forEnterprise Parameterthrough Batch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Enable EM toFALSE using Phoneconfiguration Batch file inCisco Prime CollaborationProvisioning successfully

Update and check EnableExtension Mobilitychange for Phoneconfiguration throughBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Phone Type to CiscoUnified IP Phone 7975Gusing Phone configurationBatch file in Cisco PrimeCollaboration Provisioningsuccessfully

Update and check PhoneType change for Phoneconfiguration throughBatch file




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Allow Control ofdevice to CTI to TRUEusing Phone configurationBatch file in Cisco PrimeCollaboration Provisioningsuccessfully

Update and check AllowControl of device to CTIchange for Phoneconfiguration throughBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Do Not Disturb toFALSE using EM Accessconfiguration Batch file inCisco Prime CollaborationProvisioning successfully

Update and checkDoNotDisturb change for EMAccess configurationthrough Batch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck MultilevelPrecedence and PreemptionIndication to ON usingExtensionMobility Accessconfiguration Batch file inCisco Prime CollaborationProvisioning successfully

Update and check MLPPIndication change for EMAccess configurationthrough Batch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Ignore PresentationIndicators to False usingExtensionMobility Accessconfiguration Batch file inCisco Prime CollaborationProvisioning successfully

Update and check IgnorePresentation Indicatorschange for EM Accessconfiguration throughBatch file




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Timer to 15 secondsusing EM Lineconfiguration Batch file inCisco Prime CollaborationProvisioning successfully

Update and check Timerchange for EM lineconfiguration throughBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Log Missed Calls toFalse using ExtensionMobility Line configurationBatch file in Cisco PrimeCollaboration Provisioningsuccessfully

Update and check LogMissed Calls change forEM line configurationthrough Batch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Reject AnonymousCalls to False usingExtension Mobility Lineconfiguration Batch file inCisco Prime CollaborationProvisioning successfully

Update and check RejectAnonymousCalls changefor EM line configurationthrough Batch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck Delay before theFirst Notification Attemptto 5 mins using Voicemail- SMTP Notification Batchfile in Cisco PrimeCollaboration Provisioningsuccessfully

Update and check Delaybefore the FirstNotification Attemptchange for Voicemail -SMTP Notificationthrough Batch file




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck Notification RepeatInterval to 10 mins usingVoicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully

Update and check DelayNotification RepeatInterval change forVoicemail - SMTPNotification throughBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck All Messages toEnabled using Voicemail -SMTP Notification Batchfile in Cisco PrimeCollaboration Provisioningsuccessfully

Update and check AllMessages change forVoicemail - SMTPNotification throughBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck All Voice Messagesto Disabled usingVoicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully

Update and check AllVoice Messages changefor Voicemail - SMTPNotification throughBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck All DispatchMessages to Disabled usingVoicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully

Update and check AllDispatch Messageschange for Voicemail -SMTP Notificationthrough Batch file




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck All Fax Messages toDisabled using Voicemail- SMTP Notification Batchfile in Cisco PrimeCollaboration Provisioningsuccessfully

Update and check FaxMessages change forVoicemail - SMTPNotification throughBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck Enable NotificationDevice to FALSE usingVoicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully

Update and check EnableNotification Devicechange for Voicemail -SMTP Notificationthrough Batch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck Calendar Meetingsto Enabled using Voicemail- SMTP Notification Batchfile in Cisco PrimeCollaboration Provisioningsuccessfully

Update and checkCalendar Meetingschange for Voicemail -SMTP Notificationthrough Batch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck CalendarAppointments to Enabledusing Voicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully

Update and checkCalendar Appointmentschange for Voicemail -SMTP Notificationthrough Batch file




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck SimpleMail TransferProtocol Enabled to Falseusing Voicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully

Update and check SMTPEnabled change forVoicemail - SMTPNotification throughBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck Include a Link toWeb inbox in Message textto FALSE using Voicemail- SMTP Notification Batchfile in Cisco PrimeCollaboration Provisioningsuccessfully

Update and checkInclude a Link to Webinbox inMessage text forVoicemail - SMTPNotification throughBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck Message Count inMessage text to TRUEusing Voicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully

Update and checkInclude Message Countin Message text changefor Voicemail - SMTPNotification throughBatch file


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheckMessage Informationin Message text to TRUEusing Voicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully

Update and checkInclude MessageInformation in Messagetext change forVoicemail - SMTPNotification throughBatch file




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck Send Transaction ofVoiceMessages to Enabledusing Voicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully

Update and check SendTransaction of VoiceMessages change forVoicemail - SMTPNotification throughBatch file

PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Add Batchthat supports RemoteDesktop Protocol Productto check the forward andbackward truncation inkeyword functionality isimplemented for thesupported attributes whileordering in Cisco PrimeCollaboration Provisioningsuccessfully

Add Batch that supportsRDP Product to check theforward and backwardtruncation in keywordfunctionality isimplemented for thesupported attributeswhileordering


PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to cancel theSchedule Synchronizationfor All Message Processorswith Synchronizationoption as "Abortsynchronization on devicesynchronization failure"and check the results inCisco Prime CollaborationProvisioning successfully

Cancelling of ScheduleSynchronization for AllMessage Processors withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"




PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to cancel theSchedule Synchronizationfor All Presence Processorswith Synchronizationoption as "Abortsynchronization on devicesynchronization failure"and check the results inCisco Prime CollaborationProvisioning successfully

Cancelling of ScheduleSynchronization for AllPresence Processors withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"


PassedLogin to Provisioning GUIand verify that user is ableto integrate Prime LicenseManager with Provisioning

Integrating PLM withProvisioning


PassedLogin to Provisioning GUIand verify that user is ableto check for Prime LicenseManager in AdministrationDashboard

Check for PLM inAdministrationDashboard


PassedLogin to Provisioning GUI=> Administration andverify that user is able toview Cisco Prime LicenseManager application onclicking Prime LicenseManager link on PrimeCollaboration Provisioning

View Cisco PLMapplication on clickingPLM link on PCP


PassedGo to Infrastructure Setup=> InfrastructureConfiguration and verifythat user is able to addParticipant Templates forthe specified CiscoTelepresence ManagementSuite through Cisco PrimeCollaboration Provisioningin BE7000 Medium andverify whether configuredParticipant Templates isreplicated at CiscoTelepresence ManagementSuite Sucessfully

Add and validateParticipant Templates forthe specified Cisco TMSusing InfrastructureConfiguration inBE7000-M




PassedGo to Infrastructure Setup=> InfrastructureConfiguration and verifythat user is able to addConference Templates forthe specified CiscoTelepresence ManagementSuite through Cisco PrimeCollaboration Provisioningin BE7000 Medium andverify whether configuredConference Templates isreplicated at CiscoTelepresence ManagementSuite Successfully

Add and validateConference Templatesfor the specified CiscoTMS using InfrastructureConfiguration inBE7000-M


PassedGo to Infrastructure Setup=> InfrastructureConfiguration and verifythat user is able to add NewConference for thespecified CiscoTelepresence ManagementSuite through Cisco PrimeCollaboration Provisioningin BE7000 Medium andverify whether configuredNew Conference isreplicated at CiscoTelepresence ManagementSuite Successfully

Add and validate NewConference for thespecified Cisco TMSusing InfrastructureConfiguration inBE7000-M


PassedGo to Infrastructure Setup=> InfrastructureConfiguration and verifythat user is able to view theSearch History for thespecifiedCisco ExpresswayEdge through Cisco PrimeCollaboration Provisioningin BE7000 MediumSuccessfully

View the Search Historyfor the specified CiscoExpressway Edge usingInfrastructureConfiguration inBE7000-M




PassedGo to Infrastructure Setup=> InfrastructureConfiguration and verifythat user is able to view theLocal Zone for thespecifiedCisco ExpresswayEdge through Cisco PrimeCollaboration Provisioningin BE7000 MediumSuccessfully

View the Local Zone forthe specified CiscoExpressway Edge usingInfrastructureConfiguration inBE7000-M


PassedGo to Infrastructure Setup=> InfrastructureConfiguration and verifythat user is able to view theZones for the specifiedCisco Expressway Edgethrough Cisco PrimeCollaboration Provisioningin BE7000 Medium andverify whether configuredZones is replicated at CiscoExpressway EdgeSuccessfully

Add and validate Zonesfor the specified CiscoExpressway Edge usingInfrastructureConfiguration inBE7000-M


CSCuz72173FailedGo to User provisioningand verify that DND optionis getting saved for SXseries devices whilelauching self-care.

DND option should getsaved for SX seriesdevices


Related DocumentationCisco IP Phone 7800 Series

Release Notes:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7800-series/11-0-1/releasenotes/pa2d_b_cisco-ip-phone-7800-series.html

Cisco IP Phone 8800 Series

Release Notes:

www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8800-series/english/11-0-1/releasenotes/p881_b_cisco-ip-phone-8800-series.html

Cisco Unified IP Phone 8900 Series

Administration Guide:


Test Results SummaryRelated Documentation





www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8941_8945/9_0/english/admin_guide/P415_BK_C1A45FBB_00_admin-guide-8941-8945/P415_BK_C1A45FBB_00_admin-guide-8941-8945_chapter_010.html

Release Notes:

www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/9971_9951_8961/9_4_2_SR2/english/releasenotes/P569_BK_IB15A550_00_ip_phone-8961_9951_9971-rn-942sr2firmware-release.html#CS38_TP_I38B1C80_00

Cisco Unified IP Phone 9900 Series


www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/9971_9951_8961/9_0_1/english/admin_guide/P567_BK_A3A732A5_00_admin-guide-8961_9951_9971-9_0/P567_BK_A3A732A5_00_admin-guide-8961_9951_9971-9_0_chapter_010.html

Release Notes:

www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/9971_9951_8961/firmware/9-4-2/P567_BK_8E92FC80_00_8961_9951_71-release-notes-9_4_2.html

Cisco Jabber for Mac


http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_5/CJAB_BK_J06BEF2D_00_jabber-parameters-reference-guide-115/CJAB_BK_J06BEF2D_00_jabber-parameters-reference-guide-115_chapter_010.html#CJAB_RF_MEA9CDC7_00

User Guide:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/mac/11_5/jabm_b_cisco-jabber-for-mac-UG-115.html#JABM_TP_CE289AB0_00

Release Notes:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/mac/11_6/jabm_b_release-notes-for-cisco-jabber.html

Cisco Jabber for iPhone

Installation Guide:

http://www.cisco.com/c/en/us/support/customer-collaboration/jabber-iphone-ipad/products-installation-guides-list.html

Jabber Planning Guide

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_5/CJAB_BK_C6FFF6D8_00_cisco-jabber-115-planning-guide.pdf

Cisco Jabber for iPad




























Cisco Jabber for Android


http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Android/11_6/RN/jaba_b_release-notes-for-cisco-jabber-for-android-11_6.html

Cisco Spark

Product Overview:

http://www.cisco.com/c/dam/en/us/products/collateral/conferencing/webex-meetings/product-overview-c78-734154.pdf

Cisco Spark for Windows - Release Notes:

https://support.ciscospark.com/customer/portal/articles/1966497-cisco-spark-for-windows---release-notes

Cisco Spark for Mac - Release Notes:

https://support.ciscospark.com/customer/portal/articles/2022796-cisco-spark-for-mac---release-notes

Cisco TelePresence Video Communication Server


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/admin_guide/Cisco-VCS-Administrator-Guide-X8-7.pdf

Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/release_note/Cisco-VCS-Release-Note-X8-7.pdf

Deployment Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-7/Cisco-VCS-Basic-Configuration-Single-VCS-Control-Deployment-Guide-X8-7.pdf

Mobile and Remote Access Deployment Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-7/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-7.pdf

Cisco TelePresence System Integrator Package C90


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/profile-c90-and-codec-c90-administrator-guide-tc73.pdf

Collaboration Endpoint Software 8.0

Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/software/ce8/release-notes/ce-software-release-notes-ce8.pdf

Cisco TelePresence SX80 Codec








https://support.ciscospark.com/customer/portal/articles/1966497-cisco-spark-for-windows---release-notes

https://support.ciscospark.com/customer/portal/articles/2022796-cisco-spark-for-mac---release-notes













http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce80/sx80-administrator-guide-ce80.pdf

Cisco TelePresence SX10 Quick Set

User Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce80/trc6-sx10-sx20-user-guide-ce80.pdf



Cisco TelePresence SX20 Quick Set



Cisco TelePresence MX300 G2 and MX200 G2


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce80/mx200g2-mx300g2-administrator-guide-ce80.pdf

Cisco Jabber Guest


http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Guest/10_6/ag/JABC_BK_C5AE0E46_00_cisco-jabber-guest-106-administration/JABC_BK_C5AE0E46_00_cisco-jabber-guest-106-administration_chapter_0111.html

Installation Guide:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Guest/10_6/icg/JABC_BK_JF2738FB_00_jabber-guest-server-106-installation.html

Cisco DX Series

Release Notes:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/dx/series/rel-notes/1025/dx00_b_release-notes-dx-series-1025.html

Cisco DX650

User Guide:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/dx/dx650/user/1025/DX65_BK_C569965D_00_cisco-dx650-user-guide-1025.html

Cisco DX70 and DX80

User Guide:

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/dx/dx70/user/1025/en/dx70-dx80-user-guide-1025.pdf





http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce80/trc6-sx10-sx20-user-guide-ce80.pdf
















http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/dx/series/admin/1025/DX00_BK_CB112361_00_cisco-dx-series-ag-1025.html

Release Notes:


Cisco TMS


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/admin_guide/Cisco-TMS-Admin-Guide-15-2-1.pdf

Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/release_note/Cisco-TMS-release-notes-15-2-1.pdf

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/install_guide/Cisco-TMS-install-guide-15-2-1.pdf

Cisco TelePresence Conductor


http://www-author.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/admin_guide/TelePresence-Conductor-Admin-Guide-XC4-2.pdf

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/install_guide/TelePresence-Conductor-Virtual-Machine-Install-Guide-XC4-2.pdf

Deployment Guides:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/config_guide/xc4-2_docs/TelePresence-Conductor-Clustering-Unified-CM-Deployment-Guide-XC4-2.pdf

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/config_guide/xc4-2_docs/TelePresence-Conductor-Clustering-Cisco-VCS-B2BUA-Deployment-Guide-XC4-2.pdf

Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/release_note/TelePresence-Conductor-Release-Notes-XC4-2.pdf

Cisco TelePresence Server


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/admin_guide/Cisco-TelePresence-Server-Printable-Help-4-3-Virtual-Machine.pdf

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Cisco-TelePresence-Server-on-Virtual-Machine-Install-Guide-4-3.pdf

Deployment Guide:




























Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/release_note/Cisco-TelePresence-Server-Software-Release-Notes-4-3-1-13.pdf

Cisco TelePresence Multipoint Control Unit


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/admin_guide/Cisco_Telepresence_MCU_5300_Series_4-4_Product_administration_guide.pdf

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/install_guide/Cisco_TelePresence_MCU_53x0_Installation_Guide.pdf

Deployment Guide:

http://www.cisco.com/c/en/us/support/docs/conferencing/telepresence-mcu-mse-8510/117626-configure-telepresence-00.html

Release Notes:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/release_note/Cisco-TelePresence-MCU-Software-release-notes-4-5-1-45.pdf

Cisco TelePresence Content Server


http://www.cisco.com/c/en/us/td/docs/telepresence/tcs/7_1/admin/administration/tcs_7_1.html

Installation Guide:

http://www.cisco.com/c/en/us/td/docs/telepresence/tcs/7_1/install/tcs-7-1-vm-install.html

Release Notes:

http://www.cisco.com/c/en/us/td/docs/telepresence/tcs/7_1/release/notes/tcs-7-1-relnotes.html

CE Endpoints



Release Notes:


Cisco TelePresence Conductor Endpoints


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/tc7/administration-guide/ex-series-administrator-guide-tc73.pdf

Release Notes:















http://www.cisco.com/c/en/us/td/docs/telepresence/tcs/7_1/admin/administration/tcs_7_1.html

http://www.cisco.com/c/en/us/td/docs/telepresence/tcs/7_1/install/tcs-7-1-vm-install.html

http://www.cisco.com/c/en/us/td/docs/telepresence/tcs/7_1/release/notes/tcs-7-1-relnotes.html






http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/software/tc7/release_notes/tc-software-release-notes-tc7.pdf

IX5000

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/ix5000/assembly_guide/ix5000_install_guide.pdf

User Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/ix_sw/8_x/user/guide/ix-8-1-ug.pdf


http://www.cisco.com/c/en/us/td/docs/telepresence/ix_sw/8_x/admin/guide/ix_8_admin_guide.html

Release Notes:

http://www.cisco.com/c/en/us/td/docs/telepresence/ix_sw/8_x/release/notes/ix_release_notes.html

Cisco Prime Collaboration Provisioning

Release Notes:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-2/release/notes/Cisco_Prime_Collaboration_Provisioning_Release_Notes_11_2.pdf

Install and Upgrade Guide,11.x:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-2/provisioning/install_upgrade/guide/cpco_b_Cisco_Prime_Collaboration_Provisioning_Install_and_Upgrade_Guide_11_2.pdf

Standard and Advanced Guide,11.x:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-2/provisioning/guide/Cisco_Prime_Collaboration_Provisioning_Guide_11_2.pdf

CPC Assurance and Analytics 11.5

Install and Upgrade Guide,11.x:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-1/assurance/inst_upg/guide/cpco_b_Cisco_Prime_Collaboration_Assurance_and_Analytics_Install_and_Upgrade_Guide_11_1.pdf





http://www.cisco.com/c/dam/en/us/td/docs/telepresence/ix5000/assembly_guide/ix5000_install_guide.pdf

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/ix_sw/8_x/user/guide/ix-8-1-ug.pdf

http://www.cisco.com/c/en/us/td/docs/telepresence/ix_sw/8_x/admin/guide/ix_8_admin_guide.html

http://www.cisco.com/c/en/us/td/docs/telepresence/ix_sw/8_x/release/notes/ix_release_notes.html











Documents

Test Results for Cisco Unified Communications Solution Release … · CHAPTER 1 Cisco Unified Communications System Test • CiscoUnifiedCommunicationsSystemTest, page 1 • CiscoUnifiedCommunicationsSystemTestforJapan,