Embed Size (px)
Citation preview
www.tesabs.ch
For a detailed information about TESA’s products
• Browseourgeneralcatalogueon-lineon www.swissinstruments.com
• AskforyourownhardcopyorCDonourwebsite www.swissinstruments.com/contact.html
www.tesabs.ch
1
IndexCalipers 2-5
External micrometers 6-9
Internal micrometers 10-11
Dial test indicators and supports 12-13
Dial gauges and supports 14-15
Bore gauges 16
Gauge blocks 17
Electronic indicators 18
Electronic equipment 19
Instruments for large dimensions 20-21
Height gauges 22-23
Surface roughness testers 24
TESA-REflEx Concept 25
TESA-vISIo 26-27
TESA-SCAn 28-29
mICRo-HITE 3D 30-31
TESASTAR 32
TESA DesignSWISS mADE
SCS calibration certificate
TESA Design – Product from the European Community
other calibration certificate
TESA DesignProduct produced outside Europe
Inspection report
Product from the European Community
Inspection report with a declaration of conformity
Product produced outside Europe
Declaration of conformity
www.tesabs.ch
2
00510008
00560013
B
A
C
B
A
C
2
A
C
B
3.2
15.5
3.7
1.5x
1.9
3.6
15.5
3.7
1.5x
1.9
B
A
C
2
00510041
00530110
C A l I P E R S
Vernier Calipers – TESA’s models with locking screw.
Dial CalipersRobustness – High accuracy – Patented shockproof design – Ideal for use in the workshop – Easy reading – Slider with metal dial housing.
Order number
Designation measuring rangemm / in
vernier readingmm / in
Dimensions, mmA B C
00510041 SWISSCAL 2 0 ÷ 150 / – 0,02 / – 40 15,5 Ø 1,500510047 Standard 0 ÷ 150 / – 0,05 / – 40 15,5 Ø 1,500530103 Standard 0 ÷ 150 / 0 ÷ 6 0,05 / 1/128 40 15,5 Ø 1,500530104 Standard 0 ÷ 200 / 0 ÷ 8 0,05 / 1/128 50 18 1,5 x 200530105 Standard 0 ÷ 300 / 0 ÷ 12 0,05 / 1/128 64 22 –00530110 Standard 0 ÷ 150 / 0 ÷ 6 0,02 / 0.001 40 15,5 Ø 1,500530111 Standard 0 ÷ 200 / 0 ÷ 8 0,02 / 0.001 50 18 1,5 x 200530112 Standard 0 ÷ 300 / 0 ÷ 12 0,02 / 0.001 64 22 –
Order number
Designation measuring rangemm
Scale intervalmm
mm per revolution
Dimensions, mmA B C
00510008 CCMA-M 0 ÷ 150 0,02 2 40 13 7400510045 CCMA-M 0 ÷ 200 0,02 2 50 18,6 89,500510046 CCMA-M 0 ÷ 300 0,02 2 64 20,6 105,500510050 CCMA-M 0 ÷ 150 0,01 1 40 13 74
Optional accessory00560013 Depth foot
www.tesabs.ch
3
C
B
A
D
A
B
b
a
00510509
00510143
00510621
C A l I P E R S
Calipers with rounded measuring faces– With or without fine adjust device
Depth Calipers– TESA’s models with flat measuring faces.
Order number
measuring rangemm
vernier readingmm
Dimensions, mmA B C D
00510133 0 ÷ 150 0,02 100 7,5 3 800510134 0 ÷ 150 0,05 100 7,5 3 800510143 0 ÷ 250 0,02 100 7,5 3 800510144 0 ÷ 250 0,05 100 7,5 3 800510163 0 ÷ 500 0,02 100 8,5 4 1200510173 0 ÷ 600 0,02 150 8,5 4 12
Order number
measuring rangemm / in
vernier readingmm / in
Dimensions, mma b A B
Without fine adjust device00510509* 0 ÷ 200 / – 0,02 / – 17 3,5 80 500510506 0 ÷ 200 / – 0,05 / – 17 3,5 80 500510521 0 ÷ 300 / – 0,02 / – 20 4 90 500530521 0 ÷ 300 / 0 ÷ 12 0,02 / 0.001 20 4 90 500510522 0 ÷ 300 / – 0,05 / – 20 4 90 5
With fine adjust device00510621 0 ÷ 300 / – 0,02 / – 20 4 90 500510641 0 ÷ 500 / – 0,02 / – 28 6 150 1000510651 0 ÷ 600 / – 0,02 / – 28 6 150 1000510671 0 ÷ 1000 / – 0,02 / – 32 8 150 10
* Provided with a flexible rule, 200 mm long.
www.tesabs.ch
4
ø1.
5
15.5
3.2
C
A
B 13
1,7
3,6 6
15,5
1,7
4 6
15,5
ø1.
5
15.5
3.2
C
A
B 13
1,7
3,6 6
15,5
1,7
4 6
15,5
00530091
00530300
NEW
TESA SHOP-CAL With patented TESA capa µ system – Resolution to 0,01 mm / 0.0005 inABSOLUTE or DIFFERENTIAL measurements – High-quality precision mechanics – Large LCD display – Easy to use – Excellent Price/Quality ratio.
TESA CAL IP67 magna µ systemWith patented TESA magna µ system – Resolution to 0,01 mm / 0.0005 inHighest degree of protection ever achieved for this type of hand-held tools – Totally immune to the penetration of liquids and other particles.Magnetic measuring system, a TESA technology guaranteeing full dependability and accuracy, even in the thoughest conditions of use – SWISS MADE.
C A l I P E R S
Order number
measuring rangemm / in
Thumb roller Dimensions, mmA B C
00530091 150 / 6 • 40 16 71,500530092 200 / 8 • 50 20 89,500530093 300 / 12 • 64 22 105,5
Order number
measuring rangemm / in
Thumb roller RS232 Dimensions, mmA B C
00530300 150 / 6 – – 40 16 71,500530301 150 / 6 • – 40 16 71,500530302 200 / 8 • – 50 20 89,500530303 300 / 12 • – 64 22 105,500530311 150 / 6 • • 40 16 71,500530312 200 / 8 • • 50 20 89,500530313 300 / 12 • • 64 22 105,5
www.tesabs.ch
5
00530223
00530233
00530243
CB
A
A
4
B
CB
A
8,5
4 12
Order number
measuring rangemm / in
Dimensions, mmA B
00530241 0 ÷ 200 / 0 ÷ 8 100 800530243 0 ÷ 300 / 0 ÷ 12 150 8
Order number
measuring rangemm / in
Dimensions, mmA B C
00530230 0 ÷ 250 / 0 ÷ 10 5 80 54
Order number
measuring rangemm / in
Knife-edged jaws
Dimensions, mmA B C
00530221 0 ÷ 200 / 0 ÷ 8 – 5 80 –00530223 0 ÷ 300 / 0 ÷ 12 – 5 90 –00530225 0 ÷ 600 / 0 ÷ 24 – 10 150 –00530231 0 ÷ 200 / 0 ÷ 8 • 5 80 3000530233 0 ÷ 300 / 0 ÷ 12 • 5 90 3700530235 0 ÷ 600 / 0 ÷ 24 • 10 150 60
TESA IP67 magna µ systemModels with rounded measuring faces for internal dimensions
Models with rounded measuring faces and knife-edged jaws for internal resp. external dimensions
Models with short cut measuring faces
Model with rounded measuring faces and knife-edged jaws for internal dimensions
C A l I P E R S
www.tesabs.ch
6
5
ø2
00119046
E x T E R n A l m I C R o m E T E R S
ETALON Basic
ISOMASTER AD with small measuring faces
ISOMASTER Aq for depth measurementMeasuring rods with a 25 mm step length – Scale interval to 0,01 mm.
Spherical element for external micrometersFits on measuring inserts with a 6,5 mm diameter – Used to measure tubing wall thickness, concave workpieces and the like.
Micrometer standFor external micrometers up to 300 mm.
Ordernumber
measuring rangemm
measuring face mm
00211003 0 ÷ 150 50 x 15
Ordernumber
measuring rangemm
Scale interval mm
00119046 0 ÷ 25 0,0100119047 25 ÷ 50 0,0100119048 50 ÷ 75 0,0100119049 75 ÷ 100 0,01
Ordernumber
measuring rangemm
Scale interval mm
00210101 0 ÷ 25 0,01
Ordernumber
Ball tip diameter mm
072103522 5
Ordernumber
Description
00160201 Micrometer stand with cast iron base
www.tesabs.ch
7
80
70
0
0
10
mm 0,01 mm
0,1 mm0,001 mm
071115887
00310001
E x T E R n A l m I C R o m E T E R S
ETALON 260Reversing the knurled sleeve renders the friction drive built into the thimble inactive.
TESAMASTER High Precision Micrometers with digital counter to 0,1 mmAnalogue indication of the full millimetres, hundredths and fractions of hundredths – Error-free reading to 0,1 mm on the counter – Parallax-free reading to 0,001 mm on vernier.
INTERAPID Setting Standards
Set of 16 pairs of XB wires for screw thread measurementUsed for measuring threads according to the three-wire method. The flank diameter can either be determined arith metically or with the aid of relevant tables based on the measured actual size – Suited for any standard external micrometer with measuring faces having a 6,5 mm diameter.
Order number
measuring rangemm
Scale intervalmm
max. perm. error µm
Parallelism errorµm
071115887 0 ÷ 25 0,002 2 2071115888 25 ÷ 50 0,002 2 2071115889 50 ÷ 75 0,002 3 3071115890 75 ÷ 100 0,002 3 3071115891 100 ÷ 125 0,01 4 3071115892 125 ÷ 150 0,01 4 3071115893 150 ÷ 175 0,01 5 4071115894 175 ÷ 200 0,01 5 4
Ordernumber
measuring rangemm
max. perm. error µm
Parallelism error µm
00310001 0 ÷ 25 2 100310002 25 ÷ 50 2 1,500310003 50 ÷ 75 3 1,500310004 75 ÷ 100 3 1,5
Order number
Dimensionsmm
02140001 2502140002 5002140003 7502140004 10002140005 12502140006 150
Order number
Wire diameters mm
00240700 0,17 ÷ 3,20
www.tesabs.ch
8
06030010
5
ø2
E x T E R n A l m I C R o m E T E R S
TESA MICROMASTER Electronic Micrometers with digital displayWith patented TESA capa µ system – Resolution to 0,001 mm / 0.00005 in– Large LCD display for comfortable and sure reading.– Models – EASY with simplified functions. – IP54 protected against water splashes or IP54 RS fitted with an RS232 digital interface.
Order number
measuring range Range of indication Protection degree
RS232mm in mm in
MICROMASTER EASY06030010 0 ÷ 30 0 ÷ 1.2 0 ÷ 30 0 ÷ 1.2 IP40 –
MICROMASTER IP5406030020 0 ÷ 30 0 ÷ 1.2 0 ÷ 30 0 ÷ 1.2 IP54 –06030021 25 ÷ 50 1 ÷ 2 23 ÷ 53 0.9 ÷ 2.1 IP54 –06030022 50 ÷ 75 2 ÷ 3 48 ÷ 78 1.9 ÷ 3.1 IP54 –06030023 75 ÷ 100 3 ÷ 4 74 ÷ 104 2.9 ÷ 4.1 IP54 –
MICROMASTER IP54 RS06030030 0 ÷ 30 0 ÷ 1.2 0 ÷ 30 0 ÷ 1.2 IP54 •06030031 25 ÷ 50 1 ÷ 2 23 ÷ 53 0.9 ÷ 2.1 IP54 •06030032 50 ÷ 75 2 ÷ 3 48 ÷ 78 1.9 ÷ 3.1 IP54 •06030033 75 ÷ 100 3 ÷ 4 74 ÷ 104 2.9 ÷ 4.1 IP54 •06030071 100 ÷ 125 4 ÷ 5 98 ÷ 127 3.9 ÷ 5.1 IP54 •06030072 125 ÷ 150 5 ÷ 6 123 ÷ 152 4.9 ÷ 6.1 IP54 •06030073 150 ÷ 175 6 ÷ 7 149 ÷ 178 5.9 ÷ 7.1 IP54 •06030074 175 ÷ 200 7 ÷ 8 174 ÷ 203 3.9 ÷ 8.1 IP54 •
TESA MICROMASTER with small measuring facesMeasures grooves, feather grooves, splines and other difficult to reach locations – Small measur-ing faces specially made to check small mechanical parts.
Order number
measuring rangemm / in
06030034 0 ÷ 30 / 0 ÷ 1.2
30 mm measuring span
www.tesabs.ch
9
06030087 00440002
31
ø6.
5
ø12
h6
47
16
145
E x T E R n A l m I C R o m E T E R S
TESA MICROMASTER with prismatic measuring faces
TESA MICROMASTER Micrometer Heads Commonly used for checking any displacement on special fixtures, sliding tables, microscopes and other machines or equipment. Without spindle lock.
TESA MICROMASTER Depth MicrometerNon-rotating measuring rod. Set of 6 measuring rods with a 30 mm step length also available.
Order number
measuring rangemm / in
TESA MICROMASTER with prismatic measuring faces06030087 1 ÷ 7 / 0.04 ÷ 0.2706030088 5 ÷ 20 / 0.20 ÷ 0.8006030089 20 ÷ 35 / 0.80 ÷ 1.3806030090 35 ÷ 50 / 1.38 ÷ 1.9706030091 50 ÷ 65 / 1.97 ÷ 2.5606030092 65 ÷ 80 / 2.56 ÷ 3.15
Order number
measuring rangemm
mounting diameter
06030038 0 ÷ 30 12h6
Order number
Application rangemm
measuring facesmm
06030069 0 ÷ 90 / 0 ÷ 3.5 50 x 1506030070 0 ÷ 180 / 0 ÷ 7 100 x 15
Optional accessory06060021 6-piece set of rods 0 ÷ 180 mm
Order number
Diametermm
Parallelismerror, mm
Cylindricity errormm
Cylindrical setting standards00440001 5 0,5 –00440002 20 0,7 100440003 25 0,7 100440004 35 1 100440005 45 1,2 1,500440006 50 1,2 1,500440007 65 1,5 1,5
Measure cutting tools such as milling cut-ters with uneven number of flutes, reamers or taps. Determine roundness errors on cylindrical parts. The 60° angle of the prism aperture is convenient for 3-flute tools.
www.tesabs.ch
10
00812304
00812300
I n T E R n A l m I C R o m E T E R S
TESA IMICRO with analogue indication, metric
TESA IMICRO with analogue indication Full metric sets
Order number
Application rangemm
Single micrometermm
Setting ring diametermm
Extension length mm
00813409 3,5 ÷ 6,5 3,5 ÷ 4 4 – 4 ÷ 4,5 5,5 4,5 ÷ 5,5 5,5 ÷ 6,5
00810000 6 ÷ 12 6 ÷ 8 8 100 8 ÷10 10 10 ÷12
00810800 11 ÷ 20 11 ÷ 14 11 150 14 ÷ 17 17 17 ÷ 20
00811500 20 ÷ 40 20 ÷ 25 25 150 25 ÷ 30 35 30 ÷ 35 35 ÷ 40
00812300 40 ÷ 100 40 ÷ 50 50 150 50 ÷ 60 70 60 ÷ 70 90 70 ÷ 80 80 ÷ 90 90 ÷ 100
Order number
measuring rangemm
Scale intervalmm
max. perm. error/ Repeatability limit, µm
00813410 3,5 ÷ 4 0,001 4 / 400813411 4 ÷ 4,5 0,001 4 / 400813412 4,5 ÷ 5,5 0,001 4 / 400813413 5,5 ÷ 6,5 0,001 4 / 400810001 6 ÷ 8 0,001 4 / 400810002 8 ÷ 10 0,001 4 / 400810003 10 ÷ 12 0,001 4 / 400810801 11 ÷ 14 0,005 4 / 400810802 14 ÷ 17 0,005 4 / 400810803 17 ÷ 20 0,005 4 / 400811501 20 ÷ 25 0,005 4 / 400811502 25 ÷ 30 0,005 4 / 400811503 30 ÷ 35 0,005 4 / 400811504 35 ÷ 40 0,005 4 / 400812301 40 ÷ 50 0,005 4 / 400812302 50 ÷ 60 0,005 5 / 500812303 60 ÷ 70 0,005 5 / 500812304 70 ÷ 80 0,005 5 / 500812305 80 ÷ 90 0,005 5 / 500812306 90 ÷ 100 0,005 5 / 5
Self-centring and self-aligning internal micrometers. The high-precision thread machined into the measuring cone, combined with the measuring bolts specially arranged to provide 3-line contact, make them the only micrometers in the world that fully complies with the ABBE principle. Perform highly depend-able measurements, even at great depths.
www.tesabs.ch
11
06130224
06130113
I n T E R n A l m I C R o m E T E R S
TESA IMICRO capa µ system Full sets with digital display
Order number
Application rangemm
Single micrometermm
Setting ring diametermm
length ofextensions mm
06130220 3,5 ÷ 6,5 3,5 ÷ 4 4 – 4 ÷ 4,5 5,5 4,5 ÷ 5,5 5,5 ÷ 6,5
06130221 6 ÷ 12 6 ÷ 8 8 100 8 ÷ 10 1010 ÷ 12
06130222 11 ÷ 20 11 ÷ 14 11 15014 ÷ 17 1717 ÷ 20
06130223 20 ÷ 40 20 ÷ 25 25 15025 ÷ 30 3530 ÷ 3535 ÷ 40
06130224 40 ÷ 100 40 ÷ 50 50 15050 ÷ 60 7060 ÷ 70 9070 ÷ 8080 ÷ 9090 ÷ 100
Order number
measuring range max. perm. error / Repeatability limit, µm
mm in
06130101 3,5 ÷ 4 0.1377 ÷ 0.1574 4 / 406130102 4 ÷ 4,5 0.1574 ÷ 0.1771 4 / 406130103 4,5 ÷ 5,5 0.1771 ÷ 0.2165 4 / 406130104 5,5 ÷ 6,5 0.2165 ÷ 0.2559 4 / 406130105 6 ÷ 8 0.2362 ÷ 0.3150 4 / 406130106 8 ÷ 10 0.3150 ÷ 0.3970 4 / 406130107 10 ÷ 12 0.3970 ÷ 0.4724 4 / 406130108 11 ÷ 14 0.4330 ÷ 0.5512 4 / 406130109 14 ÷ 17 0.5512 ÷ 0.6693 4 / 406130110 17 ÷ 20 0.6693 ÷ 0.7874 4 / 406130111 20 ÷ 25 0.7874 ÷ 0.9843 4 / 406130112 25 ÷ 30 0.9843 ÷ 1.1811 4 / 406130113 30 ÷ 35 1.1811 ÷ 1.3780 4 / 406130114 35 ÷ 40 1.3780 ÷ 1.5748 4 / 406130115 40 ÷ 50 1.5748 ÷ 1.9685 4 / 406130116 50 ÷ 60 1.9685 ÷ 2.3622 5 / 506130117 60 ÷ 70 2.3622 ÷ 2.7560 5 / 506130118 70 ÷ 80 2.7560 ÷ 3.1496 5 / 506130119 80 ÷ 90 1.1496 ÷ 3.5433 5 / 506130120 90 ÷ 100 3.5433 ÷ 3.9370 5 / 5
TESA IMICRO capa µ system with digital displayA smart combination of the capacitive system with the IMICRO unique cone, both from TESA – Resolution to 0,001 mm / 0.00005 in.
www.tesabs.ch
12
01810005
01630003
01811000
01860201
01860202
01860302
D I A l T E S T I n D I C AT o R S A n D S u P P o R T S
TESATAST Dial Test Indicators
Set of Dial Test Indicators with Small Support
Measuring Inserts
SWISSTAST * Dial Test Indicators
Order number
Scale interval mm
measuring span mm
Dial diameter mm
Circular scale
Stylus length mm
01810005 0,01 0,8 28 0 ÷ 0,4 ÷ 0 12,5301810006 0,01 0,8 38 0 ÷ 0,4 ÷ 0 12,5301810007 0,01 0,5 28 0 ÷ 0,25 ÷ 0 36,5301810008 0,01 0,5 38 0 ÷ 0,25 ÷ 0 36,5301810009 0,002 0,2 28 0 ÷ 100 ÷ 0 12,5301810010 0,002 0,2 38 0 ÷ 100 ÷ 0 12,53
Order number
Scale interval mm
measuring span mm
Dial diameter mm
Circular scale
Stylus length mm
01811000 0,01 0,8 28 0 ÷ 0,4 ÷ 0 12,5301811001 0,002 0,2 38 0 ÷ 100 ÷ 0 12,53
* Same technical data as for regular models, but delivered with a stylus fitted with a 2 mm dia. ruby ball tip no. 01860302.
Order number
Description
01630003 Set of dial test indicators with small support
consisting of :01810005 Dial test indicator01810010 Dial test indicator01860203 Stylus01840104 Mounting rod01840105 Mounting rod01860307 Wrench for styli01639007 INTERAPID small support UJ 15
Order number
Ball tip Ball tip diameter mm
Stylus length mm
01860201 Carbide 1 12,5301860202 Carbide 2 12,5301860302 Ruby 2 12,5301860212 Carbide 2 36,53
www.tesabs.ch
13
213
ø 44
42.5
17
1.5
58.3 66
.3
18.4
1.5
1.5 8
12.5
36.5
35
17
10.65
9.4
ø40
ø27
8
48.9
1L1
D I A l T E S T I n D I C AT o R S A n D S u P P o R T S
Order number
Description
01639007* INTERAPID UJ15 small magnetic support with dovetail clamp and a 8 mm dia. clamping bore
* Dial gauge is not supplied with the support.
TESA – IP65 Electronic Dial Test Indicator
COMPAC Dial Test Indicators To 0,01 mm
INTERAPID UJ 15 Magnetic SupportIdeal for dial test indicators and dial gauges with dial diameter up to 40 mm.– With two rigid joints and fine adjustment.
– Inductive measuring system, patented.
– Selectable scale intervals on analogue display: 10, 20, 50 µm/1, 2, 5 µm.
– Water and coolant resistant (IP65).
– Displayed modes (NOR/MIN/MAX/MAX-MIN).
– RS232 data output
– Long range up to 3 mm.– Two-way measuring.
No reversing lever.– Continuous two-way clock-
wise rotation of the pointer.– Swivelling probe through
180° (see in the instruction manual).
Order number
measuring spanmm
numerical interval mm
Stylus length mm
measuring force
01830001 0,8 0,01/0,001 / 0.0005/0.00005 12,5 0,13 N (±15%)
Order number
measuring span, mm
Scale intervalmm
Dial diameter mm
Circular scale
Stylus l1 in mm
213 1,5 0,01 27 0 ÷ 25 ÷ 50 18213G 1,5 0,01 40 0 ÷ 25 ÷ 50 18212GL 3 0,01 40 0 ÷ 50 ÷ 100 36
www.tesabs.ch
14
7
6
ø4
ø8 h6
20,5
48
12ø
40
74,5
ø4
ø8 h6
ø5
ø10
37
29
6
48
.4
(77
.4)
6.5 14.5
ø4
0
ø3
7
ø3
ø4
ø8 h6
ø5
ø10
37
29
6
48
.4
(77
.4)
6.5 14.5
ø4
0
ø3
7
ø3
ø4
ø8 h6
ø5
ø10
37
29
6
48
.4
(77
.4)
6.5 14.5
ø4
0
ø3
7
ø3
016390350163902201639017
01419047 365S01410010353
D I A l G A u G E S A n D S u P P o R T S
Precision Dial Gauges, 40 mm dial diameter
Order number
Reading mm
measuring span mm
Shock proof Travel per revolution, mm
Circular scale
Dial lock
01419047 0,01 5 • 0,5 0 ÷ 25 ÷ 50 –353 0,01 5 • 0,5 0 ÷ 25 ÷ 50 –Model protected against the penetration of liquids353E 0,01 5 • 0,5 0 ÷ 25 ÷ 50 –High-precision model01410010 0,001 1 • 0,1 0 ÷ 50 ÷ 100 •Model with restricted reading range365S 0,002 ±0,08 • 0,2 8 ÷ 0 ÷ 8 –
Magnetic Supports
Order number measuring force, n measuring face, mm v-Base for diameters Application range, mm fine adjustment01639017 ≈ 600 – 70 ÷ 220 – •01639022* ≈ 700 – 30 ÷ 150 – •01639035* – 100 x 115 – 0 ÷ 170 –
* Dial gauge is not supplied with the support.
Highly rigid arms and articulations.
www.tesabs.ch
15
23
9
18
6
72,5
108
ø8 h6
ø4
R31
ø 5
8
ø 5
2
(108
)
2215
6
16,5
13
ø 8
1
7,5
7,5
7,5
M 2,5 - 6H
33 ø 5
ø58
69
186
ø8 h6
ø4
7,5
22,5
105
ø8 h6
ø5
50
57
.5
6
85
(14
2.5
)
1015.7
ø5
8
ø5
3
ø3
ø4.5
ø8 h6
ø5
ø10
50
43
6
62
(10
5)
915.7
ø5
8
ø5
3
ø3
0141760501 532E
01419052
01419048 01412511
D I A l G A u G E S A n D S u P P o R T S
ETALON Basic with short range, 62 mm dial diameter
Precision Dial Gauges, 58 mm dial diameter
Order number
Reading mm
measuring span mm
Shock proof Travel per revolution, mm
Circular scale Dial lock
0141760501 0,1 10 – 10 0 ÷ 5 ÷ 10 –01419048 0,01 10 – 1 0 ÷ 50 ÷ 100 –01419049 0,01 30 • 1 0 ÷ 50 ÷ 100 –532 0,01 10 • 1 0 ÷ 50 ÷ 100 –
Model protected against the penetration of liquids532E 0,01 10 • 1 0 ÷ 50 ÷ 100 –
High-precision models01412511 0,001 1 • 0,1 0 ÷ 50 ÷ 100 –01412611 0,001 5 • 0,2 0 ÷ 100 ÷ 200 –
High-precision model protected against the penetration of liquids01412711 0,001 1 • 0,1 0 ÷ 50 ÷ 100 –
Order number
Readingmm
measuring span, mm
Shock proof Circular scale Displacement range, mm
01419051 0,001 0,1 • 50 ÷ 0 ÷ 50 3,001419052* 0,001 0,1 • 50 ÷ 0 ÷ 50 3,0
* IP54 model protected against the penetration of liquids
AccuracyMaximum permissible error:– in one measuring direction throughout the measuring range, Ge 1 µm– over any local range including any 10 scale divisions, Gt 0,7 µm– in both measuring directions throughout the measuring range, Gges 1,2 µm
Repeatability limit, Fw 0,5 µmMax. Hysteresis, Fu 0,5 µm
www.tesabs.ch
16
10 -
150
mm
510
15
20IN
TER
APID
0
510
1520
SWIT
ZER
LAN
D
0
Z (2:1)
Z
M 2.3
3.5
2.5
max
.
~ 65
10 -
150
mm
510
15
20IN
TER
APID
0
510
1520
SWIT
ZER
LAN
D
0
Z (2:1)
Z
M 2.3
3.5
2.5
max
.
~ 65
05710092
B o R E G A u G E S
INTERAPID IRA 2Practical instrument for comparative measurement – Performs 2- or 3-point measurements, depending on used accessory – Suitable for through holes, blind bores, grooves or undercuts as well as for internal measurement on workpieces with plan parallel surfaces.
Order numberINTERAPID IRA 2, complete set079105704
consisting of:
3 Steel inserts, hardened – 3 Short steel inserts, hardened – 3 Long steel inserts, hardened – 2 Adjustable arms for bores ≥ 6 mm – 1 Small insert holder for 3-point measurement – 1 Large insert holder for 3-point measurement – 1 Centring device for bores from 15 to 30 mm – 1 Centring device for bores from 30 to 150 mm – 1 Special screwdriver.
TESA VERIBOR Light Bore gauges with two-point contact made to measure holes and form errors – Self-centring into the bore – Can equally be used with a dial gauge, precision indicator or electronic probe having a 8 h6 clamping shank diameter.
Order number
Application rangemm
measuring bolt travelmm
measuring depthmm
05710090 18 ÷ 35 1,30 17605710091 35 ÷ 60 1,40 17805710092 50 ÷ 150 1,40 17805710093 18 ÷ 150 1,30 / 1,40 176 / 178
Dial gauge not included in the set.
– Wide application range from 10 up to 150 mm.
– Easy handling thanks to its convenient design and light weight.
– Built-in indicator to 0,01 mm with fine setting.
– Centring device for two-point measurement.
www.tesabs.ch
17
0651515021
TESA Metric Gauge Block Sets in Steel, Tungsten Carbide or CeramicNominal lengths from 1 to 100 mm
Order numberSteel
Order numberCarbide
Order numberCeramic
Accuracy grades
Set compositions mm
Stepsmm
number of gauge blocks
32-Piece Set – M320651516027 0651526027 0651536027 K 1,005 10651515027 0651525027 0651535027 0 1,01 ÷ 1,09 0,01 90651511027 0651521027 0651531027 1 1,1 ÷ 1,9 0,1 90651512028 0651522027 0651532027 2 1,0 ÷ 9,0 1,0 9
10, 20, 30, 60 4
47-Piece Set – M470651516021 0651526021 0651536021 K 1,005 10651515021 0651525021 0651535021 0 1,01 ÷ 1,09 0,01 90651511021 0651521021 0651531021 1 1,1 ÷ 1,9 0,1 90651512021 0651522021 0651532021 2 1,0 ÷ 24,0 1,0 24
25 ÷ 100 25 4
88-Piece Set – M880651516014 0651526014 0651536014 K 1,0005 10651515014 0651525014 0651535014 0 1,001 ÷ 1,009 0,001 90651511014 0651521014 0651531014 1 1,01 ÷ 1,49 0,01 490651512014 0651522014 0651532014 2 0,5 ÷ 9,5 0,5 19
10 ÷ 100 10 10
112-Piece Set – M1120651516012 0651526012 0651536012 K 1,0005 10651515012 0651525012 0651535012 0 1,001 ÷ 1,009 0,001 90651511012 0651521012 0651531012 1 1,01 ÷ 1,49 0,01 490651512012 0651522012 0651532012 2 0,5 ÷ 24,5 0,5 49
25 ÷ 100 25 4
122-Piece Set – M1220651516011 0651526011 0651536011 K 1,0005 10651515011 0651525011 0651535011 0 1,001 ÷ 1,009 0,001 90651511011 0651521011 0651531011 1 1,01 ÷ 1,49 0,01 490651512011 0651522011 0651532011 2 1,6 ÷ 1,9 0,1 4
0,5 ÷ 24,5 0,5 49 30 ÷ 100 10 825, 75 2
G A u G E B l o C K S
www.tesabs.ch
18
53,1
18,4 68
,4
28,5
ø8 h6
ø4
121,
5
ø57
,1
7
27
134,
4
ø57
,1
7
27
53,1
18,4 68
,4
28,5
ø8 h6
ø4
121,
5
ø57
,1
7
27
134,
4
ø57
,1
7
27
01930230 0193025801930241
E l E C T R o n I C I n D I C AT o R S
TESA DIGICO 200 to 700
TESA DIGICO 1 And 2 High Precision IndicatorsBoth models are remarkable for their simple functions, long range and high accuracy.
TESA DIGICO 205 and 305 Main functions: ON/Auto OFF – Data output – Counting sense reversal – Lockable function keys.
Order number
Designation measuring span mm / in
numerical interval mm / in
max. perm. error µm
Repeatability limitµm
01930230 DIGICO 205 MI 12,5 / 0.5 0,01 / 0.0005 20 1001930231 DIGICO 305 MI 12,5 / 0.5 0,001 / 0.00005 8 201930232* DIGICO 305 MIE 12,5 / 0.5 0,001 / 0.00005 8 201930241 DIGICO 410 MI 25 / 1 0,01 / 0.0005 20 1001930250 DIGICO 505 MI 12,5 / 0.5 0,001 / 0.00005 4 201930251 DIGICO 510 MI 25 / 1 0,001 / 0.00005 5 201930258 DIGICO 705 MI 12,5 / 0.5 0,001 / 0.00005 4 2
* model protected to IP54
Order number
Designation measuring span mm / in
max. perm. error μm
Repeatability limit μm
01930000 DIGICO 1 30 / 1.18 2 101930001 DIGICO 2 60 / 3.36 3 1
TESA DIGICO 400 and 500ABS and REL modes – Both display and keypad can be rotated through 270°. Additional functions: PRESET mode – Tolerance mode – Full RESET.
TESA DIGICO 705For bore gauges with 2-point contact. Allows for zero-setting of the indicator to lowest value of the sett ing ring.Value storage Max, Min, Max-Min (TIR).
– Analogue and numerical indication. Possible orientation of the analogue indication in a number of positions.
– Zero-setting anywhere within the measuring span.– Numerical interval
0,001/0,01 mm – 0.00005/0.0005 in.– Counting sense reversal.– Limit values can be entered for classification purposes
through displayed symbols. Additional green, red or amber background with the indicator connected to the mains.
– Value storage through the functions «Highest value», «Lowest value» or «Highest value minus lowest value».
• LCD display with both ana-logue and digital indication.
• Mechanical tolerance marks.
• Dimensions as per DIN standard 878.
www.tesabs.ch
19
03210924
05030010
05030012
03230200
03210802
03210904 NEW
NEW
NEW
NEW
0503
0500
E l E C T R o n I C E q u I P m E n T
TESA Electronic Probes With Analogue Output
TWIN Probes With Wireless Connection
USB Probes
Order number
Designation measuring rangemm
max. perm. errorµm
Repeatability µm
measuring force n
Plunger retraction
03210904 GT 21 ± 2 0,2 + 3 • L3 0,01 0,63 mechanical03210924 GT 22 ± 2 0,2 + 3 • L3 0,01 0,63 vacuum03230041 GT 61 ± 5 1 + 4 • L 0,05 0,9 mechanical03230042 GT 62 ± 5 1 + 4 • L 0,05 0,9 vacuum03210802 GT 31 ± 0,3 0,2 + 50 • L2 0,1 0,1 –
Order number
Designation measuring range mm
max. perm. errorµm
Repeatability µm
Plunger retraction
03230500* GTL21 W ±2 0,4 + 0,6 • L < 0,1 manual03230501* GTL212 W ±1,5 0,4 + 0,6 • L < 0,1 pneumatic03230502* GT61 W ±5 0,8 + 0,6 • L < 0,24 manual03230503* GT612 W ±5 0,8 + 0,6 • L < 0,24 pneumatic04760069 Charger for W-probes – Supplied with EU or US connector05030012 TWIN Station (receiver with 8 probe inputs), including USB cable (1,80 m long)
* Resolution to 0,1 µm – Autonomy up to 4 weeks – Coverage (depending on surroundings) : ~20 m
Order number
Designation measuring range, mm
max. perm. error µm
Repeatability µm
measuring force n
03230200 GTL 21 USB ± 2 0,4 + 0,6 • L < 0,1 0,6303230201 GTL 22 USB ± 2 0,4 + 0,6 • L < 0,1 0,6303230202 GTL 222 USB ± 1,5 0,4 + 0,6 • L < 0,1 1,203230204 GT 61 USB ± 5 0,8 + 0,6 • L < 0,24 0,9
other models : see TESA general catalogue
These probes are specially designed for high-precision measurements by comparison. Each probe can either be linked to a TESATRONIC display unit fitted with one or two probe inputs or to a BPX interfacing box with multiple probe inputs (multigauging applications).
The wireless probes are made for use in any installation that can not accommodate the cable of a common probe. Due to their autonomy and their robust construction, they are able to operate in the most hostile environment.
Fitted with a USB interface, these TESA probes can be directly connected to the PC. The use of a USB multiplexer provides Users with a flexible and cost-effective solution. In addition, each probe offers a precision that remains unchanged wherever zero-setting has occured.
www.tesabs.ch
20
01110300
01110000
072109107
I n S T R u m E n T S f o R l A R G E D I m E n S I o n S
TESA UNIMASTER Universal Instrument
ETALON 532 Internal Micrometers
Specially designed to measure very large internal and external dimensions, this universal measur-ing instrument offers multiple possibilities of use.
Micrometers with two-point contactIncreased measuring range through extensions with built-in cylindrical standards – Screw type system for quick assembly.
Order number
Application range mm
TESA UNIMASTER full set01110000 Internal dimensions 250 ÷ 1475
External dimensions 225 ÷ 1450
consisting of:1 Measuring element for internal dimensions 250÷275 mm or external dimensions 225 ÷ 250 mm – 1 Pair of measuring bolts for internal measuring – 1 Pair of measuring bolts for internal/external measuring, L=75 mm – 1 Pair of measuring bolts for external measuring, L = 100 mm – 1 Setting stand-ard for internal or external dimensions up to 250 mm or 225 mm, resp. – Extensions of 25, 50, 75, 100, 125, 150, 300, 450 and 600 mm – 1 Special screwdriver for extensions – 1 Set of suspension accessories (4 brackets along with 4 clamps) – 1 Wooden case for complete set – Additional optional accessories.
Complete sets with order number 072109101 072109107 072109108 072109117 072109128Application range in mm 50 ÷ 170 50 ÷ 290 50 ÷ 530 50 ÷ 1010 50 ÷ 1510
consisting of:Order number Designation measuring
range, mmDimensionsmm
max. perm.error, µm
072103576 Micrometer element
50 ÷ 65 3 • • • • •072103585 Extension 15 1,5 • • • • •072105462 Extension 30 1,5 • • • • •072109030 Extension 60 2 • • • • •072103586 Extension 120 2 • • • •072109055 Extension 240 3 • • •072109066 Extension 480 3,5 • •072109089 Extension 500 3,5 •
www.tesabs.ch
21
07739001
06030056
00590062
I n S T R u m E n T S f o R l A R G E D I m E n S I o n S
Order number
measuring range, mm
measuring range, in
Dimensions in mmColumn Basis (l x H x W)
07739001 0 ÷ 300 0 ÷ 12 25 x 6 60 x 40 x 10007739002 0 ÷ 600 0 ÷ 24 30 x 12 110 x 50 x 16007739003 0 ÷ 1000 0 ÷ 40 30 x 12 110 x 50 x 160
ETALON Height and Scribing Gauges with numerical indication to 0,01 mm / 0.0005 in
Interapid LightMetric/Inch conversion – Hold function for displayed value – Uni/Bidirectional OPTO-RS data transmission – Two adjustable origin points (Ref I / Ref II) – PRESET function – MIN/MAX mode – Two limit values for classification purposes – Resolution 0,01 mm / 0.0005 in.
TESA MICROMASTER capa µ system with interchangeable anvilsResolution to 0,001 mm / 0.00005 in
Order number
Application rangemm
Application rangein
max. perm. error µm
Parallelism error µm
06030047 0 ÷ 100 0 ÷ 3.94 6 306030048 100 ÷ 200 3.94 ÷ 7.87 7 4,506030049 200 ÷ 300 7.87 ÷ 11.81 8 706030050 300 ÷ 400 11.81 ÷ 15.75 9 906030051 400 ÷ 500 15.75 ÷ 19.69 10 906030052 500 ÷ 600 19.69 ÷ 23.62 11 906030053 600 ÷ 700 23.62 ÷ 27.56 12 1006030054 700 ÷ 800 27.56 ÷ 31.50 13 1206030055 800 ÷ 900 31.50 ÷ 35.43 14 1206030056 900 ÷ 1000 35.43 ÷ 39.37 15 16
Additional measuring ranges up to 1500 mm upon request.
Order number
measuring range, mm
max. perm. error, µm
Repeata bility limit, µm
Total length Weight ,kgfixed
jawmovable jaw
00590061 330 30 20 618 – 1,100590062 630 40 20 918 – 1,300590063 1025 60 20 – 1306 1,600590064 1525 150 20 – 1806 200590065 2040 250 30 – 2306 2,300590066 2545 350 30 – 2806 2,600590067 3050 450 40 – 3306 3
models 300 and 600 mm with a fixed jaw on the left side, or movable on any other model.
Each set includes 4 inter chan-geable anvils with a stepped length of 25 mm. Anvils are adjusted and numbered in sets, thus rendering any correction of the indication unnecessary.
www.tesabs.ch
22
00730045
00730046
00730047
00730059
00730043
00730044
H E I G H T G A u G E S
TESA-HITE, TESA-HITE plus M, TESA-HITE magna
Order number
Designation measuring span mm / in
Application range mm / in
max. permissible errorµm / in (l in m / in)
Repeatability (2σ) µm / in
00730043 TESA-HITE 400 415 / 16 0 ÷ 570 / 0 ÷ 22 2,5 + 4 • L / 0.0001+0.000004 • L < 2 / < 0.000100730044 TESA-HITE 700 715 / 28 0 ÷ 870 / 0 ÷ 34 2,5 + 4 • L / 0.0001+0.000004 • L < 2 / < 0.000100730045 TESA-HITE plus M 400 405 / 16 0 ÷ 560 / 0 ÷ 22 2,5 + 3 • L / 0.0001+0.000003 • L < 1 / < 0.0000500730046 TESA-HITE plus M 700 705 / 27 0 ÷ 860 / 0 ÷ 33 2,5 + 3 • L / 0.0001+0.000003 • L < 1 / < 0.0000500730047 TESA-HITE magna 400 415 / 16 0 ÷ 570 / 0 ÷ 22 < 8 / < 0.0003 < 3 / < 0.0001500730059 TESA-HITE magna 700 715 / 28 0 ÷ 870 / 0 ÷ 34 < 8 / < 0.0003 < 3 / < 0.00015
TESA-HITE 400 / 700Precision in motionDue to their robust and reliable construction, both TESA-HITE 400 and 700 featuring TESA’s opto-electronic system with incremen-tal glass scale are ideally suited for dimensional inspection on the shop floor. Full autonomy is ensured through battery power.Each model measures height or step dimensions, diameters, cen tre distances and groove width. – Built-in air-bearing. – Ability to determine parallelism
deviations.– TESA exclusive system for
automatic detection of the culminating point. Patented.
– Guaranteed high precision through long-lasting stability of the glass scale.
– SCS certificate.
TESA-HITE magna 400 / 700made to withstand in severe workshop conditionsEquipped with the patented TESA magna µ system technology, these two height gauges are designed to remain unaffected even in severe workshop conditions such as liquid and oil splashing, dust particles.Each model is battery-powered and can measure height or step dimensions, diameters, centre- to-centre distance of two bores or two grooves, width of grooves, and much more. – Full protection of the electron-
ics against water, oils and dust (IP65).
– Ability to determine parallelism deviations.
– Patented TESA’s magnetic sys tem guaranteeing a safe oper at ing in extreme work shop conditions.
– SCS certificate.
TESA-HITE plus M 400 / 700Precision in motion using the motorised versionThe added value of the motorised TESA-HITE plus M 400 / 700 is noticeable, not only in their tech- nical features but also in their ease of use. – Full protection of the electron-
ics against water, oils and dust. – Integrated air cushion, fixed
control panel.– Easy, intuitive operatin through
the rotary power control.– Provide all the functions of
a powerful motorised column, including height, diameter, distance, parallelism, perpen-dicularity, straightness, angle and 2D measurement besides programming and automatic performance of measurement cycles, statistical data processing.
– SCS certificate.
www.tesabs.ch
23
00730063 0076016300730064 00730065
00760220
H E I G H T G A u G E S
TESA MICRO-HITE 350 / 600 / 900manual or motorised versions
Accessory Set for Height Gauges
Order number
Designation measuring span mm / in
Application range mm / in
max. permissible errorµm / in (l in m / in)
Repeatability (2σ) µm / in
00730033 TESA MICRO-HITE 350 365 / 14 0 ÷ 520 / 0 ÷ 20 2 + 3 • L / 0.0001+0.000003 • L ≤ 1 / < 0.0000500730034 TESA MICRO-HITE 600 615 / 24 0 ÷ 770 / 0 ÷ 30 2 + 3 • L / 0.0001+0.000003 • L ≤1 / < 0.0000500730035 TESA MICRO-HITE 900 920 / 36 0 ÷ 1075 / 0 ÷ 42 2 + 3 • L / 0.0001+0.000003 • L ≤ 1 / < 0.0000500730063 TESA MICRO-HITE plus M 350 365 / 14 0 ÷ 520 / 0 ÷ 20 2 + 1,5 • L / 0.0001+0.0000015 • L ≤ 0,5 / < 0.00002500730064 TESA MICRO-HITE plus M 600 615 / 24 0 ÷ 770 / 0 ÷ 30 2 + 1,5 • L / 0.0001+0.0000015 • L ≤ 0,5 / < 0.00002500730065 TESA MICRO-HITE plus M 900 920 / 36 0 ÷ 1075 / 0 ÷ 42 2 + 1,5 • L / 0.0001+0.0000015 • L ≤ 0,5 / < 0.000025
Order number
Description
00760173 Small accessory set
Order number
Description
00760220 TESA POWER PANEL plus M with printer
00760221 TESA POWER PANEL plus M without printer
00760163 TESA POWER PANEL for manual TESA MICRO-HITE
Control Panels for TESA MICRO-HITE Height Gauges
TESA MICRO-HITE, manualStand-alone height gauges for 1D or 2D measurements of internal and external dimensions on parts having flat, parallel or cylindrical surfaces.Automatic detection of the culminating point on bores and shafts. Memory functions «max.», «min.» and «max.-min.» in dynamic measurement. Supplied with SCS certificate.
TESA MICRO-HITE plus M, motorisedThese height gauges are differ-ent from any other in that they provide Users with exceptional metrological performances coupled with intuitive and easy use. The unique rotary power control combines the speed of the manual concept with the precision and simplicity of the motorised one. Supplied with SCS certificate.
Manual versions 00730033 / 00730034 / 00730035
24
www.tesabs.ch
24
06930013 06930011
S u R fA C E R o u G H n E S S T E S T E R S
TESA RUGOSURF 20 and 10G Portable, compact and robust roughness testers used in the production area as for receiving inspection.
TESA Electronic Inclinometer ClinoBEVEL 1 - USBUniversal inclinometer compactly sized for direct or comparative measurement – Measuring range of ±45° with a clear indication of the angle or the slope – Reinforced housing made from anodized aluminium – Large LCD display for error-free readout.
TESA Spirit Level TESA Angle Protractor EAC
Order number
Designation Roughness parameters
Display Probe rotation
Built-in memory
06930013 Rugosurf 20 15 W/B, 2 in – •06930011 Rugosurf 10G 33 Colour, 2 in 90° •
Delivered with a SB10 regular probe, roughness standard, adapter for regular probe, battery charger and battery.
Order number
Designation measuring rangemm
numerical intervalmm/m
Dimensionsmm
05330203 TESA ClinoBEVEL 1 USB ±45° ≥ 0,02 100 x 75 x 35Supplied with ClinoSofT as well as uSB cable for connecting the inclinometer to the PC.
Order number
Readingmm/m
Dimensionsmm
for shaftsmm
05331058 0,02 200 x 40 x 42 19 ÷ 108
Order number
measuring range
Scaleinterval
Scalelength mm
00630001 4 x 90° 5’ 200
Conventional spirit level for levelling flat or cylindrical surfaces.
Precision movement providing a very low hysteresis. Two-way reading.
www.tesabs.ch
25
MEASURING MACHINES ACCESSIBLE TO EVERyONE
T E S A - R E f l E x
The TESA-REflEx principle is the solution provided by TESA to a problem faced by a number of industrial products: how to make increasingly complex applica-tions simple without losing the performance acquired by years of research and development ?The software comes in 5 distinct modules, each being dedicated to a different type of machine and metrology application. These modules share a number of com-
mon denominators, such as the automatic recognition of a part feature.The elements common to the presentation or execu-tion of the measurement tasks greatly facilitate train-ing in handling and using the modules. This results in optimum ease of use for all machines built by TESA – a decisive factor for reliable measurement operations as well as performing equipment.
www.tesabs.ch
26 T E S A - v i S i o
TESA-VISIO 200 GL – Manual Although the TESA-VISIO 200 GL is built for the production area, its small size makes it no less suited for use on the shop floor as in the laboratory.Fitted with a colour CCD-camera along with a high-precision XY-coordinate table, also compatible with various illumination and magnification systems, this machine can easily be installed in demanding industry; for example, microelectronics, micromechanics and the watchmaking industry. When used in conjunction with TESA-REFLEX Vista, the machine proves to be powerful and dependable for part inspection and analysis.
TESA-Vista is a software module installed on any manual TESA-VISIO. This software provides the operator with the need-ed help functions, especially edge detection and light sources monitoring. The measurements are, therefore, taken in the optimum conditions.This latest evolution adds the option of visual comparison between the part and its CAD model. All operators accustomed to the overlays used on profile projectors will appreciate this new option.
Order number
TESA-viSiomachine type
TESA-REflExsoftware tools
Displacements Zoom Ringlight MPE x,yµm (l in mm)
MPE xyµm (l in mm)
MPE zµm (l in mm)
Measuring volumemm
Max. weight on the table, kg
overall machinedimensions, mm
Joystick
06830401 200GL VISTA manual manual, indexable 4 x 90° 2 + 10L / 1000 2,9 + 10L / 1000 2,9 + 10L / 1000 200 x 100 x 150 10 750 x 700 x 900 –06830428 200GL VISTA manual motorised, 6,5x 4 x 90° 2 + 10L / 1000 2,9 + 10L / 1000 2,9 + 10L / 1000 200 x 100 x 150 10 750 x 700 x 900 –06830601 300GL VISTA manual motorised, 6,5x 4 x 90° + 8 x 45° 2 + 4L / 1000 2,5 + 4L / 1000 2,9 + 5L / 1000 300 x 200 x 150 20 1000 x 1200 x 900 –06830602 300GL VISTA manual motorised, 12x 4 x 90° + 8 x 45° 2 + 4L / 1000 2,5 + 4L / 1000 2,9 + 5L / 1000 300 x 200 x 150 20 1000 x 1200 x 900 –06830634 300GL VISIOn DCC motorised, 6,5x 4 x 90° + 8 x 45° 1,6 + 4L / 1000 2 + 4L / 1000 2,9 + 5L / 1000 300 x 200 x 150 20 950 x 1100 x 900 •06830635 300GL VISIOn DCC motorised, 12x 4 x 90° + 8 x 45° 1,6 + 4L / 1000 2 + 4L / 1000 2,9 + 5L / 1000 300 x 200 x 150 20 950 x 1100 x 900 •
www.tesabs.ch
27T E S A - v i S i o
TESA-VISIO 300 GL – Manual or DCCFeaturing the same construction as the 200 GL machine version, the TESA-VISIO 300 GL offers extensive light sources and magnifications in addition to a 300 x 200 mm measuring span.This machine is available either in manual or DCC version and runs TESA-REFLEX Vista or TESA-REFLEX Vision, respectively. The DCC version will check part series automatically, while still remaining simple to use, simplicity being the very corner-stone of the TESA-REFLEX principle.
TESA-REFLEX Vision is installed on every TESA-VISIO DCC – i.e. the motorised machine version of TESA-VISIO 300.In keeping with the TESA-REFLEX principle, this software is very simple to use, whilst assisting the operator throughout the programming process through to the final capture of the measurements. This results in combining TESA-REFLEX Vision with the top-of-the-range TESA-VISIO 300 DCC, an extremely precise and effective vision machine for checking series of parts.
Order number
TESA-viSiomachine type
TESA-REflExsoftware tools
Displacements Zoom Ringlight MPE x,yµm (l in mm)
MPE xyµm (l in mm)
MPE zµm (l in mm)
Measuring volumemm
Max. weight on the table, kg
overall machinedimensions, mm
Joystick
06830401 200GL VISTA manual manual, indexable 4 x 90° 2 + 10L / 1000 2,9 + 10L / 1000 2,9 + 10L / 1000 200 x 100 x 150 10 750 x 700 x 900 –06830428 200GL VISTA manual motorised, 6,5x 4 x 90° 2 + 10L / 1000 2,9 + 10L / 1000 2,9 + 10L / 1000 200 x 100 x 150 10 750 x 700 x 900 –06830601 300GL VISTA manual motorised, 6,5x 4 x 90° + 8 x 45° 2 + 4L / 1000 2,5 + 4L / 1000 2,9 + 5L / 1000 300 x 200 x 150 20 1000 x 1200 x 900 –06830602 300GL VISTA manual motorised, 12x 4 x 90° + 8 x 45° 2 + 4L / 1000 2,5 + 4L / 1000 2,9 + 5L / 1000 300 x 200 x 150 20 1000 x 1200 x 900 –06830634 300GL VISIOn DCC motorised, 6,5x 4 x 90° + 8 x 45° 1,6 + 4L / 1000 2 + 4L / 1000 2,9 + 5L / 1000 300 x 200 x 150 20 950 x 1100 x 900 •06830635 300GL VISIOn DCC motorised, 12x 4 x 90° + 8 x 45° 1,6 + 4L / 1000 2 + 4L / 1000 2,9 + 5L / 1000 300 x 200 x 150 20 950 x 1100 x 900 •
www.tesabs.ch
28 T E S A - S c A n
Order number
Description Software Headstock clamping Diameter µm (D in mm)
length µm (l in mm)
overall part dimensions, mm
Max. part weight, kg
overall machine dimensions, mm
Machine weight, kg
02430090 TESA-SCAn 52 TESA-REFLEX Scan – 2 male centres, TL02-0002 2 + D / 100 5 + L / 100 D 0,5 ÷ 52 – L 300 4 1000 x 435 x 840 10302430091 TESA-SCAn 52 TESA-REFLEX Scan • 2 male centres, TL02-0002 2 + D / 100 5 + L / 100 D 0,5 ÷ 52 – L 300 4 1000 x 435 x 840 103
TESA-SCAN 52 Ref lex-ClickThis machine, like all machines produced under the TESA-SCAn name, is initially intended as an optical system that can provide users with accurate static and dynamic features when measuring turned parts in record time.But the most spectacular innovation in the machine lies in its capability to recognise a previously programmed part. Simply pressing a button causes the machine to scan the part to be measured. If the part geometry matches an existing program, the complete results are delivered in compari-son with preset nominal values. Where no preset nominal values are available, the TESA-REFLEX Scan software provides the measurement results obtained from the various dimensions that could be detected. In many cases, this is enough for sample inspection. These two functions – unique to date and specific to the TESA-REFLEX principle – make the TESA-SCAn 52 REFLEX-Click an incom-parably user-friendly and effective inspection tool for the workshop.
This module is based on experience acquired in the measure-ment of turned parts applied to the TESA-SCAn 52 REFLEX-Click, a completely innovative piece of equipment. True to the TESA-REFLEX principle, the software will not only just measure components without the need for any preliminary programming, but also automatically recognize a part previously measured by checking it against the programmes stored in the memory.TESA-REFLEX Scan makes TESA-SCAn 52 a general-purpose machine unequalled to date, being both a true self-service platform for measuring one-off parts, and a device for inspect- ing large parts series.
www.tesabs.ch
29T E S A - S c A n
Order number
Description notes Drawings
TL01-0003 Two-jaw gripper External clampingfor manual operation,requires TL01-0027.
Ø 5
6
44 55
TL01-0027 Reducing sleeve for Morse 2 to Morse 1
MK2
92
MK1
TL01-0009 Pair of external jaws 0 ÷ 6 mm T = 1,5
B
T
ØD
TL01-0010 Pair of external jaws 0 ÷ 6 mm T = 3TL01-0011 Pair of external jaws 6 ÷ 12 mm T = 3TL01-0012 Pair of external jaws 12 ÷ 18 mm T = 6TL01-0013 Pair of external jaws 18 ÷ 24 mm T = 9TL01-0038 Pair of external jaws 0 ÷ 6 mm T = 6TL01-0040 Pair of external jaws 6 ÷ 12 mm T = 15Z178-2026 Male drive centre,
40 mm dia., with a Morse 2 taper shank
Diamond coated MK2
8838
Ø 4
2
TL02-0017 Rotation centre, Morse 2
22 17 68
Ø 1
8
Ø 2
9
MK2
TL02-0018 Rotation centre wth a B12 taper male centre and Morse 2 taper shank
MK2
Z178-0941 Female centre with a B12 taper, 30 mm dia.
Requires TL02-0018
Order number
Description Software Headstock clamping Diameter µm (D in mm)
length µm (l in mm)
overall part dimensions, mm
Max. part weight, kg
overall machine dimensions, mm
Machine weight, kg
02430090 TESA-SCAn 52 TESA-REFLEX Scan – 2 male centres, TL02-0002 2 + D / 100 5 + L / 100 D 0,5 ÷ 52 – L 300 4 1000 x 435 x 840 10302430091 TESA-SCAn 52 TESA-REFLEX Scan • 2 male centres, TL02-0002 2 + D / 100 5 + L / 100 D 0,5 ÷ 52 – L 300 4 1000 x 435 x 840 103
www.tesabs.ch
30 T E S A - M i c R o - H i T E
TESA MICRO-HITE 3D, manualFeaturing a modern yet well-proven design, each MH3D is made from high-grade materials and components ensuring their long-term dependability.Available in the standard version or with fine adjust device, the MH3D is ideally suited for the workshop or the production area. Whether replacing or complementing usual manual toolings for part inspection, this machine can well be used as multiuser spots, when it is a question of proving the dimensional compliance of one-off parts or small part series.
Installed on all manual CMMs from TESA for many years, TESA-REFLEX MH3D has thousands of users all over the world. This software includes help functions, such as the automatic recognition of geometrical forms and shapes, that makes it easily accessible to any operator through quick handling. Although learned in a few hours only, it remains a safe bet besides a pledge of reliability.Based on the Windows EC technology, the intuitive user’s inter-face available from the REFLEX panel is more reader-friendly for higher user-friendliness.
Order number
TESA MH3D machine type
TESA-REflEx control panel
Machine displacements
Measuring head
M3 styli kit, no. 03969040
MPEE µm (l in mm)
Measuring volume mm
Max. weight on the table, kg
overall dimensions of each machine, mm
Machine weight, kg
Joystick fine adjustment
03939040 454 MH3D manual TESASTAR • 3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1620 210 – –03939240 474 MH3D manual TESASTAR • 3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1660 315 – –03939042 F 454 MH3D manual TESASTAR • 3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1620 210 – •03939242 F 474 MH3D manual TESASTAR • 3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1660 315 – •03939041 i 454 MH3D manual TESASTAR-i • 3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1620 210 – –03939241 i 474 MH3D manual TESASTAR-i • 3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1660 315 – –03939043 Fi 454 MH3D manual TESASTAR-i • 3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1620 210 – •03939243 Fi 474 MH3D manual TESASTAR-i • 3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1660 315 – •03939120 RC 454 MH3D manual / motorised TESASTAR-i • 3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1700 210 • •03939122 RC 474 MH3D manual / motorised TESASTAR-i • 3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1730 315 • •03939169 Recorder 454 Recorder manual / motorised / automated TESASTAR-i • 2,5 + 3,9L / 1000 440 x 490 x 390 227 1030 x 1100 x 1680 225 optional –
www.tesabs.ch
31T E S A - M i c R o - H i T E
TESA MICRO-HITE 3D RECORDERThe latest MH3D Recorder opens up a new path in the field of tactile three-axis measurement. This hybrid machine version makes it possible to take all measurements in both manual and automatic modes. This innovation is the solution to the problematic demands of parts inspection, from the single part to the small series.Due to its capability to automatically reproduce a part pro-gram generated either manually or using a joystick, this machine definitely makes automatic measurement accessible to everyone. Since no preliminary programming is required, reproducing a part program previously saved in the memory and have a part series be checked in the same conditions is easy.
The TESA-REFLEX Recorder module has all the functions of the software provided with the manual machines, plus a command controlling the servomotor drives mounted on each of the 3 machine axes. This additional function enables the automatic reproduction of each movement operated manually or through the joystick.With TESA-REFLEX Recorder, programming of the range of inspection operations becomes child’s play by just recording any manual movement.
Order number
TESA MH3D machine type
TESA-REflEx control panel
Machine displacements
Measuring head
M3 styli kit, no. 03969040
MPEE µm (l in mm)
Measuring volume mm
Max. weight on the table, kg
overall dimensions of each machine, mm
Machine weight, kg
Joystick fine adjustment
03939040 454 MH3D manual TESASTAR • 3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1620 210 – –03939240 474 MH3D manual TESASTAR • 3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1660 315 – –03939042 F 454 MH3D manual TESASTAR • 3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1620 210 – •03939242 F 474 MH3D manual TESASTAR • 3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1660 315 – •03939041 i 454 MH3D manual TESASTAR-i • 3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1620 210 – –03939241 i 474 MH3D manual TESASTAR-i • 3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1660 315 – –03939043 Fi 454 MH3D manual TESASTAR-i • 3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1620 210 – •03939243 Fi 474 MH3D manual TESASTAR-i • 3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1660 315 – •03939120 RC 454 MH3D manual / motorised TESASTAR-i • 3 + 4L / 1000 460 x 510 x 420 227 970 x 930 x 1700 210 • •03939122 RC 474 MH3D manual / motorised TESASTAR-i • 3 + 4L / 1000 460 x 710 x 420 200 970 x 1130 x 1730 315 • •03939169 Recorder 454 Recorder manual / motorised / automated TESASTAR-i • 2,5 + 3,9L / 1000 440 x 490 x 390 227 1030 x 1100 x 1680 225 optional –
www.tesabs.ch
32
TESASTAR-i M8
TESASTAR-p TESASTAR-mp
TESASTARM8/M850 mm
TESASTAR-rp
TESASTAR TESASTAR-i TESASTAR-i M8
T E S A S TA R
Three hand-operated probe headsIn order to provide the optimum solution to every user’s need, TESA offers its CMMs with three different probe heads from the TESASTAR programme, which also includes a full range of high-precision SWISS MADE touch trigger probes and accessories for any type of machines, whether hand-operated or CnC-controlled.
visit our website and ask for our Product info about all TESASTAR probe styli and accessories available.www.tesastar.com
Order number
Description Repeatability µm
Repositioning µm
Threaded connection
increment
03939020 TESASTAR ≤ 0,75 M3 –03939030 TESASTAR-i ≤ 0,35 ≤ 1,5 M3 15°03939031 TESASTAR-i M8 – ≤ 1,5 M8 x 45° 15°
And more...
TESA UPD gauge block comparatorMeasuring span of 25 mm – Allows a reduction of the number of needed reference gauge blocks by nearly 80%.
ETALON POLO horizontal bench For measuring precision workpieces as well as for calibrating plug gauges and measuring instruments.
TESA UPC gauge block comparatorFor calibrating gauge blocks by comparison – Single or dual template system for optimum ease of handling of the measured gauge blocks.
Dual template system (TESA’s patent)
TESA TPS motorised setting benchesFor setting operations as well as for the calibration of display on measuring instruments used for 2-point measurement.
TESA Calibrating And Setting Benches
TESA SA – Bugnon 38 – CH-1020 Renens – Switzerland – Tel. +41(0)21 633 16 00 – Fax +41(0)21 635 75 35 – www.tesabs.ch – [email protected]
TESA – 70 years of innovation in the world of Metrology It was indeed in 1941 that Jean-Georges Müller founded TESA SA, which was then ori-ented towards the design of hand-held tools characterised by their innovative features.Further to the development of the first precision tools based on a unique measuring cone, TESA’s engineers worked to diversify the techniques used as a basis for all new measur-ing means to be designed, intended for the most varied applications. Combining electron-ics since 1970 in strict compliance with metrological principles, they worked successfully to provide users with measurement solutions increasingly more efficient and ergonomic. Throughout the years, the company was also able to select and integrate the know-how and key products manufactured under the brands Etalon, Mercer, Standard Gage, Compac and Cary, contributing to its leading position in the world of dimensional measurement. Always focusing on resting its product developments on a Swiss manufacturing commit-ted to quality, the company invests each year in ultra-modern machining, assembly and test equipment to ensure the reliability and productivity of its manufacturing processes. In 2010, a major investment was made in the acquisition of a sophisticated storage and logistics equipment, serving a new platform of international distribution at production output.To market its products, TESA relies on an extensive network of distributors worldwide, supported by subsidiaries that can provide local service in the main countries of Europe, Asia and United States.As a member of the Hexagon AB group since 2001, which includes brand names such as Leica, Leitz, DEA, Brown & Sharpe and more recently Intergraph, TESA takes part in the business activities of this major player in the field of metrology and data processing, and benefits from a large structure employing some 12,000 people in 42 countries.
Printed in Switzerland – All modifications reserved – 10012.062.1012
