Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Light DutyTraffic 80mm
FrostResistant
PedestrianUse
52%
TERRAPAVE® FLAGS - GROUNDPRODUCT INFORMATION
Premium flagstones produced with natural granite materials
Sustainability DataENERGY USE: 100% renewable
WATER USED: 90% rain water harvesting
RECYCLABLE: 100% of this product can be recycled
MANUFACTURING Produced in the UK LOCATION:
NON-PRIMARY: 52-60% non primary materials
WASTE WOOD 100% recycled& PLASTIC:
CARBON FOOTPRINT: 50mm: 10.4 Kg C02 / m2
80mm: 15.2 Kg C02 / m2
CARBON REDUCTION: 20 Kg C02 / m2
BREEAM #: ‘A’ Rating - in accordance with the BRE Green Guide to Specification.(A+ Rating - when used with recycled sub-base).
# Building Research Establishment’s Environmental Assessment Method.
COLOURS: See table overleaf for stock/made to order info.
Florento Ground Sorrento Ground Rimini Ground Milano Ground Verona Ground Genoa Ground Pollensa Ground
Tuscany GroundArno Ground Como Ground
Features + BenefitsTHE FEATURES:
° Premium graded granite and natural aggregates in surface mix minimum 95%.
° Resistant to the effects of freeze/thaw that can be caused by de-icing salts.
° High quality density enhancers used to reduce the appearance of efflorescence.
° Available in a range of thicknesses from 50mm to 80mm.
° Calibrated before processing to ensure strict compliance with BS EN 1339 tolerances.
° Modern hermetic 800 tonne press production process using top mix technology.
° Temperature and humidity controlled vapour curing environment.
° Also available in a high quality ‘textured’ finish.
THE BENEFITS:
° Suitable for the highest profile commercial and public realm schemes.
° Highly durable / hard wearing.
° Specially selected colour range will suit most landscape requirements.
° Ground finish gives a highly aesthetically appealing natural look.
° Suitable for pedestrian and occasional heavy vehicle traffic.
° Exceptionally low dimensional variations assisting accuracy of placement during installation.
° Consistent high quality appearance.
° Suitable for unbound and bound pavement installations
TERRAPAVE® FLAGS- GROUNDTECHNICAL INFORMATION
MANUFACTURE: TerraPave® flags are manufactured from speciallyselected granite and other natural aggregates.Their exceptional appearance is achieved byusing the most up-to-date manufacturing andfinishing equipment. Available in both a groundand textured finish.
PLANT OF MANUFACTURE (POM):Made at our Toome Production Plant.
TRAFFICKING:TerraPave® flags are available in a range of sizesand thicknesses from 50mm - 80mm to suit avariety of public realm and traffickingapplications. For more information on selectionof suitable flag sizes and depths contact ourTechnical Department.
STANDARDS & PERFORMANCE:
Manufactured and tested to BS EN 1339:2003.
Bending Strength: Class 3
Breaking Load: Class 3
Dimensions: Class 3
Slip / Skid Potential: Low potential for slip
Weathering Resistance: Class 3
(Resistant to freeze/thaw associated with de-icing salts)
CHAMFER SIZE: 3-5mm
TerraPave® Ground - supplied with a chamferededge as standard. A square edge is available onrequest.
TerraPave® Textured - the edge is textured andhas a slightly rounded appearance.
INSTALLATION:AG recommend that our paving and flag productsare laid in accordance with British StandardsInstitute BS 7533. If you need further assistance inthis respect please consult our Technical Dept.
CERTIFICATION:
ISO 14001 - Environmental Management.
OSHAS 18001 - Occupational Health and SafetyManagement.
CE Marking - Download our Declaration ofPerformance (DOP) data at:www.ag.uk.com/cemarking
SPECIFICATION REFERENCE:
NBS PLUS: Q25 SLAB/BRICK/SETT/COBBLEPAVINGS: 31 ,315
BS EN: 1339:2003
NOTES: During installation care should be taken to protect the productfrom wet and dark base sand, dirt and detritus while remainingconstruction works are completed. To ensure the flags remain ingood condition, regular cleaning is essential after installation.
Care should be taken to ensure the chosen bedding and jointingmaterials will not stain the surface of the paving units. AGrecommends the use of appropriately graded coarse aggregatesfor bedding and jointing. As a general rule, grey or silver colouredjointing materials work well for dark grey and silver colouredflagstone units. For more information contact our Technical Dept.
TerraPave® flags are manufactured using natural stone which canvary slightly in tone. Where possible it is advised to order from thesame production run to avoid the possibility of tone variations(shading).
Like all quality concrete products with a high cement content,TerraPave® Flags can display the effects of efflorescence.Sometimes known as ‘white bloom’, this naturally occurringphenomenon will disappear over time and does not effect thestructural integrity of the flag.
Care should be taken when handling TerraPave® Flags. Duringtransport and delivery some ‘chipping’ (up to 5%) can be expected.These can be used for cuts and detailing.
T: 0121 747 0202 | ag.uk.com
Alsoavailable:
40mm Depthmade to order
(minimum order size 500m2)
PRODUCT DATA:product/depth size in colours m2 per units units unit weight packs per packs per
(mm) stock available pack per m2 per pack weight per pack 8 wheeler unit lorry
TerraPave 50mm 400x400 YES Rimini / Verona / Milano 8.64 6.25 54 19.2 Kg 1.05 t 16 26
MTO Florento / Sorrento / Genoa / Pollensa / Arno / Como / Tuscany 15.36 6.25 96 19.2 Kg 1.8 t 9 15
600x400 YES Rimini/ Verona / Milano 8.64 4.16 36 28.8 Kg 1.05 t 16 26
MTO Florento / Sorrento / Genoa / Pollensa / Arno / Como / Tuscany 15.36 4.16 64 28.8 Kg 1.8 t 9 15
500x500 MTO Rimini / Verona / Milano / Florento / Sorrento / Genoa / Pollensa / 24 4 96 30 Kg 1.8 t 9 15Arno / Como / Tuscany
TerraPave 80mm 400x400 MTO Rimini / Verona / Milano / Florento / Sorrento / Genoa / Pollensa / 9.6 6.25 60 30.7 Kg 1.85 t 9 15Arno / Como / Tuscany
600x400 MTO Rimini / Verona / Milano / Florento / Sorrento / Genoa / Pollensa / 9.6 4.16 40 46.1 Kg 1.85 t 9 15Arno / Como / Tuscany
500x500 MTO Rimini / Verona / Milano / Florento / Sorrento / Genoa / Pollensa / 9 4 36 48 Kg 1.8 t 9 15Arno / Como / Tuscany
MTO - made to order (minimum order size 500m2).
Nominal depths above 50mm and up to 80mm are available as made to order items.