Term 1

Lesson 7: Cutting tools

KWAGGASRANDSKOOL / SCHOOL

WOODWORK

YEAR 2

LEARNER WORK DURING LOCKDOWN

TEACHER : MR J. J VAN RENSBURG

STUDY NOTES:

Activity:

Cutting tools:

Planes

1. Name these 3 planes: (3)

1.2. _________________________

1.3. _________________________

1.4. _________________________

2. Which plane will you use to plane long rough edges and surfaces? (1)

2.1. ____________________________

3. What is a flat face spokeshave used for? (1)

3.1. ____________________________

4. Why is correct feet placement when working important? (2)

4.1. _____________________________________________________

5. Why should you not use a smoothing plane to level a big surface (like a

table top)? (1)

5.1. ______________________________________________________

_______________________________________________________

6. What could be the cause of a rough surface after you have planed the

wood? (1)

6.1. ____________________________________________________

Total: 9

Chisels

1. Name these 5 types of chisels, and give one use for each: (10)

1. Name: ________________________

Use: _________________________________________________

___________________________________________________

2. Name: ________________________

Use: _________________________________________________

___________________________________________________

3. Name: ________________________

Use: _________________________________________________

___________________________________________________

4. Name: ________________________

Use: _________________________________________________

___________________________________________________

5. Name: ________________________

Use: _________________________________________________

___________________________________________________

6. It is better to place your wood on a flat surface when doing vertical

chiseling. Why? (1)

6.1. __________________________________________________

7. Which is safer - a very sharp chisel, or one that is not very sharp?

(1)

7.1. ____________________________

8. Choose the correct answer: (4)

Total: 17

True False

8.1 “Make a number of thin cuts instead of one

thick cut. It takes less time and requires less

power”.

8.2 “You do not need to use a bench vise or

clamps when doing chisel work.”

8.3 “Use a ball peen hammer to hit on the back

of a mortise chisel”

8.4 “Chisel in the direction of the grain of the

wood”

Miscellaneous

1. Which one of these hammers is the Carpenter’s Mallet? Circle the correct hammer in the picture: (1)

2. What is a nail punch? (1)

2.1. ________________________________________________________

3. What are oilstones? (1)

3.1. _______________________________________________________

4. Name 5 important things to remember when using oilstones . (5)

4.1. ________________________________________________________

4.2. ________________________________________________________

4.3. ________________________________________________________

4.4. ________________________________________________________

4.5. ________________________________________________________

5. Why do we use oil on oilstones? (3)

5.1. __________________________________________

5.2. __________________________________________

5.3. ________________________________________________________

6. Underline the correct answer: (1)

“You need to shape a big square piece of rough wood, into a round shape.

Which tool do you need for the job?”

6.1. Rasp or a File?

7. Use the help block to complete the sentence: (4)

7.1. In woodwork, files are used to 7.1.1__________________ tools and to

7.1.2________________ off 7.1.3_________________ such as

7.1.4_________________ etc.

(it is in your notes – Read!):

Total: 16

Screws Hamburger Metal Sharpen

Finish Wood Eat Welding