Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Auger Tooling
TEREX AUGER TOOLING CATALOG
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 2
Experience & Products you can trust.
For over 60 years Terex – has been designing and manufacturing quality rock drills, dirt augers and auger tooling products serving the utility, construction & foundation industries worldwide.
Terex is one of a select few companies that design & build both drills and auger tooling.
Experience in projects around the world provides us a unique understanding of what it takes to get the job done even in the most extreme conditions.
Our business philosophy is to utilize our expertise to partner with our customers to truly understand their needs and provide solutions with products of the highest quality.
New products and services are constantly being offered to help keep our customers updated with the latest in product improvements that enhance productivity and component life.
Service & Support you can count on.
Service and support of our customers is critical and we are commited to serving the customer - to do what it takes to meet your needs.
Recognizing the demands customers face with tight schedules, emergency situations to get electricity on again, and other unexpected requirements, we stock a large inventory of finished auger tool products for fast delivery.
Custom tooling products can be designed and built quickly to meet special job applications.
Overview
Terms to know
TX - Digger Derrick, dirt or carbide tooth
BTA - Digger Derrick, bullet tooth option
TRA - Digger Derrick, Blade tooth with carbide tip
BTR - Pressure Tool with bullet teeth
Step Auger - Pressure Tool
Muck Bucket - Used to remove material from a given diameter hole
Clean-out Bucket - Also known as mud bucket or clean-out bucket
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 3
TABLE OF CONTENTS
HD/XHD Foundation Auger Tools .................... 4 Bullet Tooth Rock Auger (BTR) ................... 6
Blade Auger, Heavy Duty ............................ 7
Dirt Auger, Heavy Duty ................................ 8
Accessories ..................................................... 9
Kelly Box, Square ........................................ 9
Adapter, Kelly Bar, Square ........................ 12
Extension, Kelly Bar, Square ..................... 13
Pilot Bits & Subs (Square Shank) .............. 14
Pilot Bits & Subs (Threaded) .................. 15 Pins ............................................................ 17
Digger Derrick Augers .................................... 18 Auger, TXD (Dirt) Series ............................ 19
Auger, TXC (Carbide) Series ..................... 22
Auger, TXCS (Rock) Series ....................... 26
Auger, TRA (Rock) Series ......................... 28
Auger, BTA (Bullet) Series ........................ 31
Auger, BTA (Bullet) / Spiral Series ............ 35
Digger Derrick Tools .................................. 37
Accessories ................................................... 40
Shank Plates & Boring Head, TX-Series ... 41
Shank Plates, TXCS Series ....................... 43
Hex Hubs ................................................... 44
Kelly Bar, Hex (Welded Option) ................. 45
Extension, Hex Kelly Bar (Solid) ................ 46
Coupler Assemblies ................................... 46
Assembly, Hex Kelly Bar Extension
(Hollow) w/Slide-on Coupler .............. 47
Standard Pilot Bits & Adapters .................. 48
Optional Pilot Bits & Adapters ................... 50
Barrel Tools .............................................................. 51
Spin-Bottom, Drill Bucket ................................ 52
Spin-Bottom, Clean Out Bucket ...................... 53
Dump-Bottom, Drill Bucket ............................. 54
Dump-Bottom, Clean Out Bucket ................... 55
Latch Mechanism ............................................ 56
Automatic Dump ....................................... 56
Manual Dump ........................................... 56
Core Barrels .................................................... 57
Core Barrel Rings ........................................... 58
Buckets & Barrels ........................................... 59
Teeth & Blocks .................................................... 60
Teeth, Auger, TX Series ............................. 61
Teeth & Blocks, Blade Series ..................... 62
Teeth & Blocks, Bullet, .76, TC10 Series ... 63
Teeth & Blocks, Bullet, .74, TC20 Series .. 64
Teeth & Blocks, Bullet, 1”, TC30 Series ..... 65
Teeth & Blocks, Bullet, .86, TC87 Series ... 67
Teeth & Blocks, Bullet, Step, TC4 Series ... 68
Teeth & Blocks, Taper-Fit Series ............... 70
Core Barrel Teeth & Blocks ........................ 72
Bucket Style Teeth ..................................... 73
Tooth Removal/Installation Tools ............... 74
I Added Digger Derrick Tools to DD Auger Section / Modified PG 49 & 17 with new parts
7-25-12
H Updated Qty on Shank Plates 3-12-12
G Updated Table on BTA Spira Auger page 1-12-12
E Updated table on Pg 27+ with new part no. added * 121911
D Added various notes. Updated tables/graphics 121411
C Updated table on page 44 & various graphics 120611
B Added info to Kelly Bar, Hex (Welded Option) 110111
A Notes updated and cosmetic changes 101911
REV DESC / PAGE NUMBERS AFFECTED DATE
J Updates to Shank Plates,Couplers, Tooth Removal and TC30 Series
8-24-12
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 4
HD/XHD FOUNDATION AUGER TOOLS
HD
/ X
HD
A
UG
ER
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 5
HD/XHD Foundation Auger Tools
RETURN TO TABLE OF CONTENTS
DIAMETER
Inch mm
18 457
22 559
24 610
26 660
30 762
36 914
42 1067
48 1219
72 1829
12 305
20 508
54 1372
60 1524
84 2134
96 2438
AUGER TYPE DESCRIPTION
BULLET (BTR) BULLET TEETH
BLADE BLADE TEETH
DIRT DIRT TEETH
FLIGHTING STYLE DESCRIPTION
SR SINGLE ROW
DR DOUBLE ROW
FLIGHTING STYLE DESCRIPTION
SF SINGLE FLIGHT
DF DOUBLE FLIGHT
CUT STYLE DESCRIPTION
SC SINGLE CUT
DC DOUBLE CUT
TC TRIPLE CUT
FLIGHT THICKNESS
DESCRIPTION
1” HD (Heavy Duty)
1.5” XHD (Extra Heavy Duty)
Other sizes available upon request.
Custom Options Available Upon Request
- Pitch
- Diameter
- Chart dimensions are nominal and will vary slightly based on material specifications & manufacturing tolerances.
- See Contact Information Below
GO TO KELLY BOX
INFORMATION
HD
/ X
HD
A
UG
ER
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 6
Bullet Tooth Rock Auger (BTR)
Key Product Features:
Standard Heavy Duty one Inch (1”) Flighting
Extra Heavy Duty 1 1/2” Flighting available
Square Drive Pilot bit
Heavy Duty Kelly Box is reinforced with gussets
Flighting pitch is engineered to maximize material flow from the tooth cutting area to maximize productivity.
Tooth angles and location are precisely controlled to optimize tooth penetration providing superior productivity and tooth life.
Optional Features:
Various sizes, types of teeth, and pilot bits available
Optional Recessed Kelly Box Available
Application:
Terex® Texoma Bullet Tooth Rock Augers are designed to maximize drill footage in medium to hard limestone and sandstone, cobbles, boulders and fracturable rock formations.
Double Cut, Double Flight, Bullet Tooth Rock Auger GO TO KELLY
BOX INFORMATION
RETURN TO TABLE OF CONTENTS
HD
/ X
HD
A
UG
ER
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 7
Blade Auger
Key Product Features:
Standard Heavy Duty one Inch (1”) Flighting
Extra Heavy Duty 1 1/2” Flighting available
2 3/8” Threaded Carbide Pilot
Heavy Duty Kelly Box is reinforced with gussets
Flighting pitch is engineered to maximize material flow from the tooth cutting area to maximize productivity.
Tooth angles and location are precisely controlled to optimize tooth penetration providing superior productivity and tooth life.
Optional Features:
Various sizes, types of teeth, and pilot bits available
Optional Recessed Kelly Box Available
Application:
Terex® Texoma Blade Augers are designed to maximize drill footage in solid/non-fractured limestone and sandstone rock formations.
Double Cut, Single Flight Blade Auger
Double Cut, Double Flight Blade Auger
Optional Dirt Pilot Bit
PN A000132
Optional Dirt Tooth
PN 17318
GO TO KELLY BOX
INFORMATION
RETURN TO TABLE OF CONTENTS
HD
/ X
HD
A
UG
ER
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 8
Dirt Auger
Key Product Features:
Standard Heavy Duty one Inch (1”) Flighting
Extra Heavy Duty 1 1/2” Flighting available
Square Drive Pilot Bit
Heavy Duty Kelly Box is reinforced with gussets
Flighting pitch is engineered to maximize material flow from the tooth cutting area to maximize productivity.
Tooth angles and location are precisely controlled to optimize tooth penetration providing superior productivity and tooth life.
Optional Features:
Various sizes, types of teeth, and pilot bits available
Optional Recessed Kelly Box Available
Application:
Terex® Texoma Dirt Augers are designed to maximize drill footage in loose to compacted soils, stiff clay , loose gravel and soft shale.
Double Cut, Double Flight Dirt Auger RETURN TO TABLE OF CONTENTS
HD
/ X
HD
A
UG
ER
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 9
A B C D
PART NO. NOMINAL KELLY
BOX
inch mm
OVERALL HEIGHT
inch mm
HOLE DIAMETER
inch mm
HOLE LOCATION
inch mm
70728 2.50 64 10.00 254 0.88 22 2.00 51
A002083 3.00 76 8.00 203 1.13 29 2.00 51
A000429 3.50 89 10.00 254 1.13 29 2.00 51
2469641 4.00 102 10.00 254 1.13 29 2.00 51
A002087 4.25 108 10.00 254 1.56 40 2.00 51
NOTE: Other Configurations (Hole sizes/Locations & Slots) Available Upon Request.
Kelly Box
A
B
D
C
RETURN TO TABLE OF CONTENTS
HD
/ X
HD
A
UG
ER
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 10
A B C D
PART NO. NOMINAL KELLY
BOX
inch mm
OVERALL HEIGHT
inch mm
HOLE DIAMETER
inch mm
HOLE LOCATION
inch mm
A002077 5.13 130 10.00 254 1.63 41 2.00,5.00 51,127
A002079 5.25 133 10.00 254 1.38 35 2.00 51
65342375TU 6.00 152 10.50 267 1.50 38 5.00 127
A002081 7.00 178 10.00 254 1.75 44 2.38,5.25 60,133
65341868TU 7.00 178 10.00 254 1.50,1.75 38,44 3.00,5.25 76,133
A000873 7.25 184 12.00 305 1.63,1.63 41,41 2.00,6.00 51,152
A002067 8.00 203 22.00 559 1.88,2.81 48,71 1.88,6.75,
10.75 48,171,
273
65341900TU 8.00 203 18.00 457 2.75 70 4.25,8.19 108,208
NOTE: Other Configurations (Hole sizes/Locations & Slots) Available Upon Request.
Graphic shown on previous page.
Kelly Box
RETURN TO TABLE OF CONTENTS
HD
/ X
HD
A
UG
ER
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 11
NOTE: Other Configurations (Hole sizes/Locations & Slots) Available Upon Request.
Kelly Box
C
D
B
A
C
D
B
A
E
A B C D E
PART NO.
NOMINAL KELLY BOX I.D.
inch mm
OVERALL HEIGHT
inch mm
SLOT DIAMETER
inch mm
SLOT LOCATION
inch mm
SLOT LENGTH
inch mm
*
A002085 4.00 102 10.00 254 1.13 29 2.00 51 NA NA
A000081 6.00 152 10.50 267 1.13 29 2.00 51 4.50 114
* Note: This box for use with 1” Dia. round pin. Slot is provided to allow easy clean-out of Kelly Box.
Hardware NOT Included: Bolt, 1-8UNC X 7.00 Grade 8 (PN A002034)
& Nut, 1-8UNC Grade 8 (PN A002035)
Or Pin, 3/4” (PN 2411581)
RETURN TO TABLE OF CONTENTS
HD
/ X
HD
A
UG
ER
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 12
Adapter, Kelly Bar
A B C
PART NO.
KELLY BOX SIZE
inch mm
BAR SIZE
inch mm
HOLE DIAMETER
inch mm
2419088 3.00 76 2.50 64 0.88 22
A001797 3.00 76 3.50 89 1.13 29
2437833 3.00 76 4.00 102 1.13 29
A000704 3.50 89 2.50 64 0.88 22
A001800 3.50 89 4.00 102 1.13 29
2429385 4.00 102 3.00 76 1.13 29
68482 4.00 102 3.50 89 1.13 29
A001659 4.25 108 4.00 102 1.13 29
A001819 4.50 114 4.00 102 1.13 29
A000750 5.25 133 3.50 89 1.13 29
A000046 5.25 133 4.00 102 1.13 29
A000781 7.00 178 4.00 102 1.13 29
A001782 8.00 203 5.25 133 1.38 35
NOTE: Other Configurations (Hole sizes/Locations & Slots) Available Upon Request.
GO TO KELLY BOX
INFORMATION
RETURN TO TABLE OF CONTENTS
HD
/ X
HD
A
UG
ER
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 13
A B C D
KELLY BOX SIZE
BAR SIZE DIAMETER BAR LENGTH
inch mm inch mm inch mm inch mm
65343326TU 3.00 76 2.50 64 0.88 22 48.00 1219
11850 3.00 76 3.00 76 1.13 29 24.00 610
2429849 3.00 76 3.00 76 1.13 29 36.00 914
2429841 3.00 76 3.00 76 1.13 29 60.00 1524
A000073 3.50 89 3.50 89 1.13 29 36.00 914
PART NO.
A000492 3.50 89 3.50 89 1.13 29 36.00 914
Extension, Kelly Bar, Square
NOTE: Hole location on the extension is the same as hole location on the Kelly Box
NOTE: Other Configurations (Hole sizes/Locations & Slots) Available Upon Request.
GO TO KELLY BOX
INFORMATION
RETURN TO TABLE OF CONTENTS
HD
/ X
HD
A
UG
ER
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 14
Pilot Bits & Subs (Square Shank)
PART NO. CODE DESCRIPTION
A002044 TPB1-175
Pilot bit, 1-3/4” square shank, standard on BTR series augers. Four replaceable teeth (PN A001375).
Use with 2429894 sub.
Includes hardware PN 42675 & 5973.
29896 TPB8
Pilot bit, fishtail,1-3/4” square shank, 8” cut diameter.
Use with 2429894 sub.
Includes hardware PN 42675 & 5973.
A000818 Pilot
Pilot bit, fishtail, 1-3/4” square shank.
Use with 2429894 sub.
Includes hardware PN 42675 & 5973.
2429894 Collar Sub, 1-3/4” square
A001678 Pilot
Pilot bit, 3” square shank, replaceable C43T teeth (A001401 & 2429927).
Use with A000001 sub.
Includes hardware PN A002034 & A002035.
A001351 Pilot
Pilot bit, 3” square shank. Four C30 replaceable teeth (PN A001370).
Use with A000001 sub.
Includes hardware PN A002034 & A002035.
A000001 Collar Sub, 3” square
GO TO KELLY BOX
INFORMATION
RETURN TO TABLE OF CONTENTS
HD
/ X
HD
A
UG
ER
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 15
Pilot Bits & Subs (Threaded)
PART NO. CODE DESCRIPTION
16845 TPB6
Bit, 2-3/8 API Threads, 3-way step type. Standard on TRA series augers.
Use with 80342 sub.
70797 TPB1
Bit, 2-3/8” API Threads, standard on BTA series au-gers. Four replaceable teeth, PN A001375.
Use with 80342 sub.
A000132 TPB9 Pilot bit, fishtail, 2-3/8” API threads. 6” cut diameter.
Use with 80342 sub.
80342 Collar Sub, pilot, 4” diameter, 2-3/8” API
A000928 Pilot Pilot bit, C30, 3T, 2-7/8” IF threads
Use with A000930 sub.
A001083 Pilot Pilot bit, C41, 2T, 2-7/8” IF threads
Use with A000930 sub.
A000930 Collar Sub, 2-7/8” IF
GO TO KELLY BOX
INFORMATION
RETURN TO TABLE OF CONTENTS
HD
/ X
HD
A
UG
ER
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 16
Pilot Bits & Subs (Threaded)
PART NO. CODE DESCRIPTION
A001081 Pilot
Pilot bit, C4-1, 2T, 2-7/8” API. Two replaceable C4 teeth, PN 2429927.
Use with A000905 sub.
A000871 Pilot
Pilot bit, 2-7/8” API threads. Three replaceable C30 teeth (PN A001537).
Use with A000905 sub.
A000905 Collar Sub, 2-7/8” API
RETURN TO TABLE OF CONTENTS
HD
/ X
HD
A
UG
ER
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 17
Pins
PART NO. CODE DESCRIPTION
A000011 Pin Pin, 2-3/8” API Threads
Use with PN 80342 sub.
A000906 Pin Pin, 2-7/8” API Threads
Use with PN A000905 sub.
A000929 Pin Pin, 2-7/8” IF Threads
Use with PN A000930 sub.
A001970 Pin Pin, 1-3/4” square shank
Use with PN 2429894 sub.
A001862 Pin Pin, 3” square shank
Use with PN A000001 sub.
65343334 Pin Pin, 2-5/8” Hex shank
Use with PN 65343434 sub.
RETURN TO TABLE OF CONTENTS
HD
/ X
HD
A
UG
ER
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 18
DIGGER DERICK TOOLS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 19
Auger, TXD (Dirt) Series
Specifications:
This series of Augers has a bolt on shank plate design. Standard flighting on Terex® Texoma TXD Series digger derrick augers are as follows:
5/16” thick for 30” diameter and smaller
1/2” thick for diameter larger than 30”
Auger stem is 3 3/4 inch O.D. tubing. Standard components are TX50 (PN 2429471) and TX52 (PN 2429429) teeth and TX205 (PN 29665) pilot bit.
Application:
Terex® Texoma TXD Series digger derrick dirt augers are manufactured to maximize the drilling performance of digger derricks, for loose and compacted soils, stiff clays and soft shales. The optional TX50D pilot bit (PN 2429167) greatly enhances the performance of the TXD Series auger.
NOTE: Graphics are for reference only.
B Boring Head
Shank Plate
Teeth
Pilot Bit & Adapter
C
A
D
G
F
E
Optional Bit
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 20
Table Continued on next page
Custom Options Available Upon Request - Pitch - Diameter - Chart dimensions are nominal and will vary slightly based on material specifications & manufacturing tolerances. - See Contact Information Below
Auger, TXD (Dirt) Series
A B C D E F G
PART NO. AUGER FLIGHT HEX FLIGHT FLIGHT
PILOT BIT DIAMETER LENGTH LENGTH SIZE THICKNESS PITCH
inch mm inch mm inch mm inch mm inch mm inch mm
2493190 9 229 104 2642 52 132 2.00 51 0.31 7.9 9 229 2429168
2493200 9 229 104 2642 52 132 2.50 64 0.31 7.9 9 229 2429168
2493210 9 229 104 2642 52 132 2.62 67 0.31 7.9 9 229 2429168
2493191 10 254 104 2642 52 132 2.00 51 0.31 7.9 9 229 2429168
2493201 10 254 104 2642 52 132 2.50 64 0.31 7.9 9 229 2429168
2493211 10 254 104 2642 52 132 2.62 67 0.31 7.9 9 229 2429168
2493192 12 305 104 2642 52 132 2.00 51 0.31 7.9 9 229 2429168
2493202 12 305 104 2642 52 132 2.50 64 0.31 7.9 9 229 2429168
2493212 12 305 104 2642 52 132 2.62 67 0.31 7.9 9 229 2429168
65340645 12 305 104 2642 60 153 2.62 67 0.31 7.9 9 229 2429168
2493193 14 356 104 2642 52 132 2.00 51 0.31 7.9 10 254 2429168
2493203 14 356 104 2642 52 132 2.50 64 0.31 7.9 10 254 2429168
2493213 14 356 104 2642 52 132 2.62 67 0.31 7.9 10 254 2429168
2493194 16 406 104 2642 48 122 2.00 51 0.31 7.9 12 305 2429168
2493204 16 406 104 2642 48 122 2.50 64 0.31 7.9 12 305 2429168
2493214 16 406 104 2642 48 122 2.62 67 0.31 7.9 12 305 2429168
65334886 16 406 104 2642 60 153 2.00 51 0.31 7.9 12 305 2429168
65340022 16 406 104 2642 60 153 2.50 64 0.31 7.9 12 305 2429168
65342156TU 16 406 104 2642 60 153 2.62 67 0.31 7.9 10 254 2429168
A000512 16 406 104 2642 60 153 2.62 67 0.31 7.9 12 305 2429168
2493195 18 457 104 2642 48 122 2.00 51 0.31 7.9 12 305 2429168
2493205 18 457 104 2642 48 122 2.50 64 0.31 7.9 12 305 2429168
2493215 18 457 104 2642 48 122 2.62 67 0.31 7.9 12 305 2429168
A000252 18 457 104 2642 60 153 2.50 64 0.31 7.9 12 305 2429168
A000255 18 457 104 2642 60 153 2.62 67 0.31 7.9 12 305 2429168
A001018 18 457 104 2642 60 153 2.62 67 0.31 7.9 12 305 2429168
A003015 18 457 104 2642 60 153 2.00 51 0.31 7.9 12 305 2429168
2493196 20 508 104 2642 48 122 2.00 51 0.31 7.9 15 381 2429168
2493206 20 508 104 2642 48 122 2.50 64 0.31 7.9 15 381 2429168
2493216 20 508 104 2642 48 122 2.62 67 0.31 7.9 15 381 2429168
A000253 20 508 104 2642 60 153 2.50 64 0.31 7.9 15 381 2429168
A000256 20 508 104 2642 60 153 2.62 67 0.31 7.9 15 381 2429168
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 21
TXD Auger
Custom Options Available Upon Request - Pitch - Diameter - Chart dimensions are nominal and will vary slightly based on material specifications & manufacturing tolerances. - See Contact Information Below
A B C D E F G
PART NO. AUGER FLIGHT HEX FLIGHT FLIGHT
PILOT BIT
DIAMETER LENGTH LENGTH SIZE THICKNESS PITCH inch mm inch mm inch mm inch mm inch mm inch mm
2493197 24 610 104 2642 48 1219 2.00 51 0.31 7.9 15 381 2429168
2493207 24 610 104 2642 48 1219 2.50 64 0.31 7.9 15 381 2429168
2493217 24 610 104 2642 48 1219 2.62 67 0.31 7.9 15 381 2429168
65340683 24 610 104 2642 60 1524 2.00 51 0.31 7.9 15 381 2429168
A000254 24 610 104 2642 60 1524 2.50 64 0.31 7.9 15 381 2429168
A000257 24 610 104 2642 60 1524 2.62 67 0.31 7.9 15 381 2429168
A001024 24 610 128 3251 60 1524 2.62 67 0.31 7.9 15 381 2429168
2493198 30 762 104 2642 40 1016 2.00 51 0.31 7.9 18 457 2429168
2493208 30 762 104 2642 40 1016 2.50 64 0.31 7.9 18 457 2429168
2493218 30 762 104 2642 40 1016 2.62 67 0.31 7.9 18 457 2429168
A001881 30 762 104 2642 52 1321 2.50 64 0.31 7.9 18 457 2429168
A001882 30 762 104 2642 52 1321 2.62 67 0.31 7.9 18 457 2429168
A003200 30 762 128 3251 52 1321 2.62 67 0.31 7.9 18 457 2429168
2493199 36 914 104 2642 40 1016 2.00 51 0.5 12.7 18 457 2429168
2493209 36 914 104 2642 40 1016 2.50 64 0.5 12.7 18 457 2429168
2493219 36 914 104 2642 40 1016 2.62 67 0.5 12.7 18 457 2429168
A001883 36 914 104 2642 52 1321 2.50 64 0.5 12.7 18 457 2429168
A001884 36 914 104 2642 52 1321 2.62 67 0.5 12.7 20 508 2429168
A000134 42 1067 104 2642 48 1219 2.62 67 0.5 12.7 20 508 2429168
A001885 42 1067 104 2642 48 1219 2.50 64 0.5 12.7 20 508 2429168
A001887 42 1067 104 2642 60 1524 2.50 64 0.5 12.7 20 508 2429168
A001888 42 1067 104 2642 60 1524 2.62 67 0.5 12.7 20 508 2429168
A000133 48 1219 104 2642 48 1219 2.62 67 0.5 12.7 24 610 2429168
A001889 48 1219 104 2642 48 1219 2.50 64 0.5 12.7 24 610 2429168
A001891 48 1219 104 2642 60 1524 2.50 64 0.5 12.7 24 610 2429168
A001892 48 1219 104 2642 60 1524 2.62 67 0.5 12.7 24 610 2429168
Auger, TXD (Dirt) Series
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 22
Auger, TXC (Carbide) Series
Specifications:
This series of Augers has a bolt on shank plate design. Standard flighting on Terex® Texoma TXC Series digger derrick augers are as follows:
5/16” thick for 30” diameter and smaller
1/2” thick for diameter larger than 30”
Auger stem is 3 3/4 inch O.D. tubing. Standard components are TX56 (PN A029225) and TX58 (PN A029400) carbide teeth and TX205C (PN 29665) pilot bit.
Application:
Terex® Texoma TXC Series Derrick dirt augers are manufactured to maximize the drilling performance of digger derricks, for loose and compacted soils, stiff clays, shales, cobbles, and medium rock strata. The optional TX50C pilot bit (PN 85889) greatly enhances the performance of the TXC Series auger.
NOTE: Graphics are for reference only.
Boring Head
Shank Plate
Teeth
Pilot Bit & Adapter
B
C
D
F
A
E
Optional Bit
G
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 23
Auger, TXC (Carbide) Series
Table Continued on next page
Custom Options Available Upon Request - Pitch - Diameter - Chart dimensions are nominal and will vary slightly based on material specifications & manufacturing tolerances. - See Contact Information Below
A B C D E F G
PART NO. AUGER
LENGTH FLIGHT LENGTH
HEX SIZE FLIGHT
THICKNESS PILOT
BIT DIAMETER inch mm inch mm inch mm inch mm inch mm inch mm
2493260 9 229 104 2642 52 1321 2.00 51 0.31 7.9 9 229 29665
2493270 9 229 104 2642 52 1321 2.50 64 0.31 7.9 9 229 29665
2493280 9 229 104 2642 52 1321 2.62 67 0.31 7.9 9 229 29665
65300542 9 229 104 2642 60 1524 2.50 64 0.31 7.9 9 229 29665
65300582 9 229 104 2642 60 1524 2.62 67 0.31 7.9 9 229 29665
65342324TU 9 229 104 2642 60 1524 2.00 51 0.31 7.9 9 229 29665
A001894 10 254 90 2286 48 1219 2.62 64 0.31 7.9 9 229 29665
2493261 10 254 104 2642 52 1321 2.00 51 0.31 7.9 9 229 29665
2493271 10 254 104 2642 52 1321 2.50 64 0.31 7.9 9 229 29665
2493281 10 254 104 2642 52 1321 2.62 67 0.31 7.9 9 229 29665
65342325TU 10 254 104 2642 60 1524 2.00 51 0.31 7.9 9 229 29665
65342326TU 10 254 104 2642 60 1524 2.50 64 0.31 7.9 9 229 29665
65342327TU 10 254 104 2642 60 1524 2.62 67 0.31 7.9 9 229 29665
2493262 12 305 104 2642 52 1321 2.00 51 0.31 7.9 9 229 29665
2493272 12 305 104 2642 52 1321 2.50 64 0.31 7.9 9 229 29665
2493282 12 305 104 2642 52 1321 2.62 67 0.31 7.9 9 229 29665
65300541 12 305 104 2642 60 1524 2.62 67 0.31 7.9 9 229 29665
65342328TU 12 305 104 2642 60 1524 2.00 51 0.31 7.9 9 229 29665
65342329TU 12 305 104 2642 60 1524 2.50 64 0.31 7.9 9 229 29665
A001568 12 305 134 3404 84 2134 2.00 51 0.31 7.9 9 229 29665
2493263 14 356 104 2642 52 1321 2.00 51 0.31 7.9 10 254 29665
2493273 14 356 104 2642 52 1321 2.50 64 0.31 7.9 10 254 29665
2493283 14 356 104 2642 52 1321 2.62 67 0.31 7.9 10 254 29665
65342330TU 14 356 104 2642 60 1524 2.00 51 0.31 7.9 10 254 29665
65342331TU 14 356 104 2642 60 1524 2.50 64 0.31 7.9 10 254 29665
65342332TU 14 356 104 2642 60 1524 2.62 67 0.31 7.9 10 254 29665
FLIGHT PITCH
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 24
Auger, TXC (Carbide) Series
Table Continued on next page
Custom Options Available Upon Request - Pitch - Diameter - Chart dimensions are nominal and will vary slightly based on material specifications & manufacturing tolerances. - See Contact Information Below
A B C D E F G
PART NO. AUGER FLIGHT HEX FLIGHT FLIGHT
PILOT BIT DIAMETER LENGTH LENGTH SIZE THICKNESS PITCH
inch mm inch mm inch mm inch mm inch mm inch mm
2493264 16 406 104 2642 48 1219 2.00 51 0.31 7.9 12 305 29665
65342333TU 16 406 104 2642 48 1219 2.50 64 0.31 7.9 12 305 29665
65342173TU 16 406 104 2642 48 1219 2.62 67 0.31 7.9 12 305 29665
65342334TU 16 406 104 2642 60 1524 2.00 51 0.31 7.9 12 305 29665
2493274 16 406 104 2642 60 1524 2.50 64 0.31 7.9 12 305 29665
65340663 16 406 104 2642 60 1524 2.50 64 0.31 7.9 12 305 85889
2493284 16 406 104 2642 60 1524 2.62 67 0.31 7.9 12 305 29665
65340681 16 406 104 2642 60 1524 2.62 67 0.31 7.9 12 305 85889
2493265 18 457 104 2642 48 1219 2.00 51 0.31 7.9 12 305 29665
2493275 18 457 104 2642 48 1219 2.50 64 0.31 7.9 12 305 29665
65341865TU 18 457 104 2642 60 1524 2.50 64 0.5 12.7 12 305 85889
2493285 18 457 104 2642 48 1219 2.62 67 0.31 7.9 12 305 29665
65341866TU 18 457 104 2642 60 1524 2.62 67 0.5 12.7 12 305 85889
65342335TU 18 457 104 2642 60 1524 2.00 51 0.31 7.9 12 305 29665
A000258 18 457 104 2642 60 1524 2.50 64 0.31 7.9 12 305 29665
65340647 18 457 104 2642 60 1524 2.50 64 0.5 12.7 12 305 29665
A000261 18 457 104 2642 60 1524 2.62 67 0.31 7.9 12 305 29665
65340028 18 457 104 2642 60 1524 2.62 67 0.31 7.9 12 305 85889
65341855 18 457 128 3251 60 1524 2.62 67 0.38 9.7 12 305 85889
A003214 18 457 104 2642 60 1524 2.62 67 0.5 12.7 12 305 29665
A001017 18 457 128 3251 60 1524 2.62 67 0.31 7.9 12 305 29665
2493266 20 508 104 2642 48 1219 2.00 51 0.31 7.9 15 381 29665
2493276 20 508 104 2642 48 1219 2.50 64 0.31 7.9 15 381 29665
2493286 20 508 104 2642 48 1219 2.62 67 0.31 7.9 15 381 29665
65336262 20 508 104 2642 60 1524 2.00 51 0.31 7.9 15 381 29665
A000259 20 508 104 2642 60 1524 2.50 64 0.31 7.9 15 381 29665
A000262 20 508 104 2642 60 1524 2.62 67 0.31 7.9 15 381 29665
65335191 20 508 104 2642 60 1524 2.62 67 0.5 12.7 15 381 29665
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 25
Custom Options Available Upon Request - Pitch - Diameter - Chart dimensions are nominal and will vary slightly based
on material specifications & manufacturing tolerances.
- See Contact Information Below
Auger, TXC (Carbide) Series
TXC Auger
A B C D E F G
PART NO. AUGER FLIGHT HEX FLIGHT FLIGHT
PILOT BIT DIAMETER LENGTH LENGTH SIZE THICKNESS PITCH
inch mm inch mm inch mm inch mm inch mm inch mm
2493267 24 610 104 2642 48 1219 2.00 51 0.31 7.9 15 381 29665
2493277 24 610 104 2642 48 1219 2.50 64 0.31 7.9 15 381 29665
2493287 24 610 104 2642 48 1219 2.62 67 0.31 7.9 15 381 29665
65342336TU 24 610 104 2642 60 1524 2.00 51 0.31 7.9 15 381 29665
A000260 24 610 104 2642 60 1524 2.50 64 0.31 7.9 15 381 29665
A000263 24 610 104 2642 60 1524 2.62 67 0.31 7.9 15 381 85889
A003040 24 610 104 2642 60 1524 2.50 64 0.31 7.9 15 381 29665
65340926 24 610 128 3251 60 1524 2.50 64 0.31 7.9 15 381 29665
A001025 24 610 128 3251 60 1524 2.62 67 0.31 7.9 15 381 29665
2493268 30 762 104 2642 40 1016 2.00 51 0.31 7.9 18 457 29665
2493278 30 762 104 2642 40 1016 2.50 64 0.31 7.9 18 457 29665
2493288 30 762 104 2642 40 1016 2.62 67 0.31 7.9 18 457 29665
65342337TU 30 762 104 2642 52 1321 2.00 51 0.31 7.9 18 457 29665
A001865 30 762 104 2642 52 1321 2.50 64 0.31 7.9 18 457 29665
A001866 30 762 104 2642 52 1321 2.62 67 0.31 7.9 18 457 29665
65342189TU 30 762 104 2642 52 1321 2.62 67 0.5 12.7 18 457 29665
65335017 30 762 128 3251 52 1321 2.62 67 0.31 7.9 18 457 29665
A001831 30 762 128 3251 52 1321 2.62 67 0.31 7.9 18 457 85889
2493269 36 914 104 2642 40 1016 2.00 51 0.5 12.7 18 457 29665
2493279 36 914 104 2642 40 1016 2.50 64 0.5 12.7 18 457 29665
2493289 36 914 104 2642 40 1016 2.62 67 0.5 12.7 18 457 29665
65341028 36 914 104 2642 40 1016 2.62 67 0.5 12.7 18 457 85889
A001867 36 914 104 2642 52 1321 2.50 64 0.5 12.7 18 457 29665
A001868 36 914 104 2642 52 1321 2.62 67 0.5 12.7 18 457 29665
A001869 42 1067 104 2642 48 1219 2.50 64 0.5 12.7 20 508 29665
A001870 42 1067 104 2642 48 1219 2.62 67 0.5 12.7 20 508 29665
A001871 42 1067 104 2642 60 1219 2.50 64 0.5 12.7 20 508 29665
A001872 42 1067 104 2642 60 1219 2.62 67 0.5 12.7 20 508 29665
A001873 48 1219 104 2642 48 1219 2.50 64 0.5 12.7 24 610 29665
A001874 48 1219 104 2642 48 1219 2.62 67 0.5 12.7 24 610 29665
A001875 48 1219 104 2642 60 1524 2.50 64 0.5 12.7 24 610 29665
A001876 48 1219 104 2642 60 1524 2.62 67 0.5 12.7 24 610 29665
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 26
Auger, TXCS (Rock) Series
Specifications:
This series of Augers has a bolt on shank plate design. Standard flighting on Terex® Texoma TXCS-Series digger derrick carbide rock augers are as follows:
5/16” thick as standard
Auger stem is 3 3/4 inch O.D. tubing . Standard components are TX87LR teeth (PN 2429914) and TXC387LR (PN 29936) pilot bit.
Application:
Terex® Texoma TXCS-Series digger derrick augers are manufactured to maximize the drilling performance of digger derricks for limestone, medium sandstone and frozen materials; medium to hard formations.
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
Boring Head
Shank Plate (include teeth)
B
C
D
A
E
Pilot Bit
G
F
NOTE: Graphics are for reference only.
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 27
Auger, TXCS (Rock) Series
TXCS Auger
Custom Options Available Upon Request - Pitch - Diameter - Chart dimensions are nominal and will vary slightly based on material specification & manufacturing tolerances. - See Contact Information Below
A B C D E F G
PART NO. AUGER FLIGHT HEX FLIGHT FLIGHT
PILOT BIT DIAMETER LENGTH LENGTH SIZE THICKNESS PITCH
inch mm inch mm inch mm inch mm inch mm inch mm
86480 16 406 104 2642 60 1524 2.00 51 0.31 7.9 12 305 29936
86484 16 406 104 2642 60 1524 2.50 64 0.31 7.9 12 305 29936
86488 16 406 104 2642 60 1524 2.62 67 0.31 7.9 12 305 29936
86481 18 457 104 2642 48 1219 2.00 51 0.31 7.9 12 305 29936
86485 18 457 104 2642 48 1219 2.50 64 0.31 7.9 12 305 29936
86489 18 457 104 2642 48 1219 2.62 67 0.31 7.9 12 305 29936
65345806TU 18 457 104 2642 60 1524 2.62 67 0.31 7.9 12 305 29936
86482 20 508 104 2642 48 1219 2.00 51 0.31 7.9 15 381 29936
86486 20 508 104 2642 48 1219 2.50 64 0.31 7.9 15 381 29936
86490 20 508 104 2642 48 1219 2.62 67 0.31 7.9 15 381 29936
86483 24 610 104 2642 60 1524 2.00 51 0.31 7.9 15 381 29936
86487 24 610 104 2642 60 1524 2.50 64 0.31 7.9 15 381 29936
86491 24 610 104 2642 60 1524 2.50 64 0.31 7.9 15 381 29936
A001179 18 457 104 2642 48 1219 2.62 67 0.5 12.7 12 305 29936
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 28
Auger, TRA (Rock) Series
Specifications:
Standard flighting on Terex® Texoma TRA Series digger derrick augers have a 1” lower flight section, hardfaced, combined with upper flighting as follows:
5/16” thick for 30” diameter and smaller
1/2” thick for diameter larger than 30”
Auger stem is 3 3/4 inch O.D. tubing. Standard teeth are TRT1(PN 2416844) & TWT2 (PN A510184) carbide blade teeth with a TPB-6 (PN 16845) carbide pilot bit. All Terex® Texoma blade series teeth and 2 3/8 inch API Texoma pilot bits will interchange with this series of drilling tools.
Application:
Terex® Texoma TRA Series digger derrick rock augers are designed and manufactured to maximize the drilling performance of digger derricks in hard rock formations. The Texoma® TRA Series digger derrick rock auger is best suited for solid (non-fracturable) formations in medium to hard drilling conditions.
NOTE: Graphics are for reference only.
Pilot Bit
B
C
D
Block
Tooth
E
A
G
F
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 29
Auger, TRA (Rock) Series
Table Continued on next page
Custom Options Available Upon Request - Pitch - Diameter - Chart dimensions are nominal and will vary slightly based on material specification & manufacturing tolerances. - See Contact Information Below
A B C D E F G
PART NO. AUGER FLIGHT HEX FLIGHT FLIGHT
PILOT BIT DIAMETER LENGTH LENGTH SIZE THICKNESS PITCH
inch mm inch mm inch mm inch mm inch mm inch mm
2493221 9 229 104 2642 52 1321 2.00 51 0.31 7.9 9 229 16845
2493231 9 229 104 2642 52 1321 2.50 64 0.31 7.9 9 229 16845
2493241 9 229 104 2642 52 1321 2.62 67 0.31 7.9 9 229 16845
65342367TU 10 254 104 2642 52 1321 2.00 51 0.31 7.9 9 229 16845
2493232 10 254 104 2642 52 1321 2.50 64 0.31 7.9 9 229 16845
2493242 10 254 104 2642 52 1321 2.62 67 0.31 7.9 9 229 16845
2493223 12 305 104 2642 52 1321 2.00 51 0.31 7.9 9 229 16845
2493233 12 305 104 2642 52 1321 2.50 64 0.31 7.9 9 229 16845
2493243 12 305 104 2642 52 1321 2.62 67 0.31 7.9 9 229 16845
2493224 14 356 104 2642 52 1321 2.00 51 0.31 7.9 10 254 16845
2493234 14 356 104 2642 52 1321 2.50 64 0.31 7.9 10 254 16845
2493244 14 356 104 2642 52 1321 2.62 67 0.31 7.9 10 254 16845
65342368TU 16 406 104 2642 48 1219 2.00 51 0.31 7.9 12 305 16845
2493235 16 406 104 2642 48 1219 2.50 64 0.31 7.9 12 305 16845
2493245 16 406 104 2642 48 1219 2.62 67 0.31 7.9 12 305 16845
2493226 18 457 104 2642 48 1219 2.00 51 0.31 7.9 12 305 16845
2493236 18 457 104 2642 48 1219 2.50 64 0.31 7.9 12 305 16845
2493246 18 457 104 2642 48 1219 2.62 67 0.31 7.9 12 305 16845
65333191TU 18 457 128 3251 48 1219 2.62 67 0.31 7.9 12 305 16845
65341889TU 18 457 104 2642 60 1524 2.62 67 0.31 7.9 12 305 16845
65342369TU 20 508 104 2642 48 1219 2.00 51 0.31 7.9 15 381 16845
2493237 20 508 104 2642 48 1219 2.50 64 0.31 7.9 15 381 16845
2493247 20 508 104 2642 48 1219 2.62 67 0.31 7.9 15 381 16845
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 30
Auger, TRA (Rock) Series
Custom Options Available Upon Request - Pitch
- Diameter
- Chart dimensions are nominal and will vary slightly based on material specification & manufacturing tolerances. - See Contact Information Below
TRA Auger
A B C D E F G
PART NO. AUGER FLIGHT HEX FLIGHT FLIGHT
PILOT BIT DIAMETER LENGTH LENGTH SIZE THICKNESS PITCH
inch mm inch mm inch mm inch mm inch mm inch mm
2493228 24 610 104 2642 48 1219 2.00 51 0.31 7.9 15 381 16845
2493238 24 610 104 2642 48 1219 2.50 64 0.31 7.9 15 381 16845
2493248 24 610 104 2642 48 1219 2.62 67 0.31 7.9 15 381 16845
65304995TU 24 610 104 2642 48 1219 2.62 67 0.38 9.7 15 381 16845
65333192 24 610 128 3251 48 1219 2.62 67 0.38 9.7 18 457 16845
65342370TU 30 762 104 2642 40 1016 2.00 51 0.31 7.9 18 457 16845
2493239 30 762 104 2642 40 1016 2.50 64 0.31 7.9 18 457 16845
2493249 30 762 104 2642 40 1016 2.62 67 0.31 7.9 18 457 16845
2493230 36 914 104 2642 40 1016 2.00 51 0.31 7.9 18 457 16845
2493240 36 914 104 2642 40 1016 2.50 64 0.31 7.9 18 457 16845
2493250 36 914 104 2642 40 1016 2.62 67 0.31 7.9 18 457 16845
65342371TU 42 1067 104 2642 40 1016 2.00 51 0.31 7.9 20 508 16845
A000406 42 1067 104 2642 40 1016 2.50 64 0.31 7.9 20 508 16845
A000564 42 1067 104 2642 40 1016 2.62 67 0.31 7.9 20 508 16845
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 31
Auger, BTA (Bullet) Series
Specifications:
Texoma® Bullet Tooth Auger (BTA) is manufactured with 1 inch Lower Flighting and 1/2 inch Upper flighting and 3/8 inch optional flighting. It has a replaceable Pilot bit, TPB1-175 (A002044) with square shank. Drills hard materials that conventional augers cannot. It is available from stock in diameters of 9 inches to 36 inches.
Application:
The Terex® Texoma Bullet Tooth Auger (BTA) is designed specifically to optimize the drilling performance of digger derricks in hard, fracturable material such as limestone, lava, backfill material as well as cobbles and boulder type drilling conditions. The Terex® BTA augers have a unique cutting pattern that allows each tooth to cut a small track which maximizes cutting efficiency and tooth life. Our cut pattern and tooth attack angle combine to allow the bullet teeth to act as “fingers” that penetrate thru and lift up fractured or broken material
C
D
B
A
G
E
NOTE: Graphics are for reference only.
F
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 32
Auger, BTA (Bullet) Series
A B C D E F G H
PART NO. HEX AUGER FLIGHT UPPER FLIGHT LOWER FLIGHT FLIGHT
PITCH inch mm
PILOT BIT DIAMETER SIZE LENGTH LENGTH THICKNESS THICKNESS
inch mm inch mm inch mm inch mm inch mm inch mm
A000887 8 203 2.50 64 104 2642 60 1524 0.31 7.9 1.00 25.4 9 229 A002044
65300540 9 229 2.00 51 104 2642 60 1524 0.5 12.7 1.00 25.4 7 178 A002044
A000021 9 229 2.50 64 104 2642 60 1524 0.31 7.9 1.00 25.4 9 229 A002044
A003223 9 229 2.50 64 104 2642 60 1524 0.5 12.7 1.00 25.4 7 178 A002044
65340644 9 229 2.62 67 104 2642 60 1524 0.31 7.9 1.00 25.4 9 229 A002044
A001051 9 229 2.62 67 104 2642 60 1524 0.5 12.7 1.00 25.4 7 178 A002044
65335982 10 254 2.00 51 104 2642 60 1524 0.5 12.7 1.00 25.4 7 178 A002044
A000022 10 254 2.50 64 104 2642 60 1524 0.31 7.9 1.00 25.4 9 229 A002044
65336329 10 254 2.50 64 104 2642 60 1524 0.5 12.7 1.00 25.4 7 178 A002044
65336330 10 254 2.62 67 104 2642 60 1524 0.5 12.7 1.00 25.4 7 178 A002044
65338034 12 305 2.00 51 104 2642 60 1524 0.5 12.7 1.00 25.4 7 178 A002044
A000023 12 305 2.50 64 104 2642 60 1524 0.31 7.9 1.00 25.4 9 229 A002044
65338035 12 305 2.50 64 104 2642 60 1524 0.5 12.7 1.00 25.4 7 178 A002044
65326455 12 305 2.62 67 104 2642 60 1524 0.31 7.9 1.00 25.4 9 229 A002044
A001053 12 305 2.62 67 104 2642 60 1524 0.5 12.7 1.00 25.4 7 178 A002044
65338037 14 356 2.00 51 104 2642 60 1524 0.5 12.7 1.00 25.4 9 229 A002044
65338038 14 356 2.50 64 104 2642 60 1524 0.5 12.7 1.00 25.4 9 229 A002044
65333190 14 356 2.62 67 104 2642 60 1524 0.5 12.7 1.00 25.4 9 229 A002044
65335816 16 406 2.00 51 104 2642 60 1524 0.5 12.7 1.00 25.4 9 229 29665
A000025 16 406 2.50 64 104 2642 60 1524 0.31 7.9 1.00 25.4 12 305 A002044
65340019 16 406 2.50 64 104 2642 60 1524 0.5 12.7 1.00 25.4 13 330 A002044
A001055 16 406 2.62 67 104 2642 60 1524 0.5 12.7 1.00 25.4 12 305 A002044
Table Continued on next page
Custom Options Available Upon Request - Pitch - Diameter - Chart dimensions are nominal and will vary slightly based on material specifications & manufacturing tolerances. - See Contact Information Below
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 33
Auger, BTA (Bullet) Series
A B C D E F G H
PART NO. HEX AUGER FLIGHT UPPER FLIGHT LOWER FLIGHT FLIGHT
PITCH inch mm
PILOT BIT DIAMETER SIZE LENGTH LENGTH THICKNESS THICKNESS
inch mm inch mm inch mm inch mm inch mm inch mm
A000026 18 457 2.50 64 104 2642 48 1219 0.31 7.9 1.00 25.4 12 305 A002044
65338044 18 457 2.50 64 104 2642 48 1219 0.5 12.7 1.00 25.4 12 305 A002044
65340021 18 457 2.62 67 104 2642 48 1219 0.31 7.9 1.00 25.4 12 305 A002044
65335972 18 457 2.00 51 104 2642 60 1524 0.5 12.7 1.00 25.4 12 305 A002044
65340020 18 457 2.50 64 104 2642 60 1524 0.5 12.7 1.00 25.4 12 305 A002044
65340662 18 457 2.62 67 104 2642 60 1524 0.31 7.9 1.00 25.4 12 305 A002044
A001056 18 457 2.62 67 104 2642 60 1524 0.5 12.7 1.00 25.4 12 305 A002044
65342338TU 20 508 2.50 64 104 2642 48 1219 0.31 7.9 1.00 25.4 15 381 A002044
65335973 20 508 2.00 51 104 2642 60 1524 0.5 12.7 1.00 25.4 15 381 A002044
65335974 20 508 2.50 64 104 2642 60 1524 0.5 12.7 1.00 25.4 15 381 A002044
A001057 20 508 2.62 67 104 2642 60 1524 0.5 12.7 1.00 25.4 15 381 A002044
65335976 22 559 2.00 51 104 2642 60 1524 0.5 12.7 1.00 25.4 15 381 A002044
65335977 22 559 2.50 64 104 2642 60 1524 0.5 12.7 1.00 25.4 15 381 A002044
A001480 22 559 2.62 67 104 2642 60 1524 0.31 7.9 1.00 25.4 15 381 A002044
65340030 22 559 2.62 67 104 2642 60 1524 0.5 12.7 1.00 25.4 15 381 A002044
A000028 24 610 2.50 64 104 2642 48 1219 0.31 7.9 1.00 25.4 15 381 A002044
65342339TU 24 610 2.00 51 104 2642 60 1524 0.5 12.7 1.00 25.4 15 381 A002044
65342340TU 24 610 2.50 64 104 2642 60 1524 0.31 7.9 1.00 25.4 15 381 A002044
65335978 24 610 2.50 64 104 2642 60 1524 0.5 12.7 1.00 25.4 15 381 A002044
A001620 24 610 2.62 67 104 2642 60 1524 0.31 7.9 1.00 25.4 15 381 A002044
A001058 24 610 2.62 67 104 2642 60 1524 0.5 12.7 1.00 25.4 15 381 A002044
65342341TU 26 660 2.50 51 104 2642 60 1524 0.31 7.9 1.00 25.4 15 381 A002044
Table Continued on next page
Custom Options Available Upon Request - Pitch - Diameter - Chart dimensions are nominal and will vary slightly based on material specifications & manufacturing tolerances. - See Contact Information Below
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 34
Auger, BTA (Bullet) Series
BTA Series
A B C D E F G H
PART NO. HEX AUGER FLIGHT UPPER FLIGHT LOWER FLIGHT FLIGHT
PITCH inch mm
PILOT BIT DIAMETER SIZE LENGTH LENGTH THICKNESS THICKNESS
inch mm inch mm inch mm inch mm inch mm inch mm
65342342TU 30 762 2.50 51 104 2642 40 1016 0.31 7.9 1.00 25.4 18 457 A002044
65342343TU 30 762 2.62 67 104 2642 40 1016 0.31 7.9 1.00 25.4 18 457 A002044
65338039 30 762 2.00 51 104 2642 52 1321 0.5 12.7 1.00 25.4 18 457 A002044
65335980 30 762 2.50 64 104 2642 52 1321 0.5 12.7 1.00 25.4 18 457 A002044
A001059 30 762 2.62 67 104 2642 52 1321 0.5 12.7 1.00 25.4 18 457 A002044
65342344TU 30 762 2.50 64 104 2642 60 1524 0.31 7.9 1.00 25.4 18 457 A002044
65341044 30 762 2.62 67 128 3251 60 1524 0.5 12.7 1.00 25.4 18 457 A002044
A000030 36 914 2.50 64 104 2642 40 1016 0.31 7.9 1.00 25.4 18 457 A002044
A001622 36 914 2.62 67 104 2642 40 1016 0.31 7.9 1.00 25.4 18 457 A002044
65342345TU 36 914 2.00 51 104 2642 52 1321 0.5 12.7 1.00 25.4 18 457 A002044
65342346TU 36 914 2.50 64 104 2642 52 1321 0.5 12.7 1.00 25.4 18 457 A002044
A001622 36 914 2.62 67 104 2642 52 1321 0.31 7.9 1.00 25.4 18 457 A002044
65342348TU 36 914 2.62 67 104 2642 52 1321 0.5 12.7 1.00 25.4 18 457 A002044
A003215 36 914 2.50 64 104 2642 60 1524 0.5 12.7 1.00 25.4 18 457 A002044
A001060 36 914 2.62 67 104 2642 60 1524 0.5 12.7 1.00 25.4 18 457 A002044
65342349TU 42 1067 2.00 51 104 2642 40 1016 0.5 12.7 1.00 25.4 24 610 A002044
A000966 42 1067 2.50 64 104 2642 40 1016 0.5 12.7 1.00 25.4 24 610 A002044
65340658 42 1067 2.62 67 104 2642 40 1016 0.5 12.7 1.00 25.4 24 610 A002044
65342350TU 48 1219 2.50 64 104 2642 40 1016 0.5 12.7 1.00 25.4 24 610 A002044
65342351TU 48 1219 2.62 67 104 2642 40 1016 0.5 12.7 1.00 25.4 24 610 A002044
Custom Options Available Upon Request - Pitch - Diameter - Chart dimensions are nominal and will vary slightly based on material specification & manufacturing tolerances. - See Contact Information Below
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 35
Auger, BTA (Bullet) Spiral
Specifications:
Texoma® Bullet Tooth Auger (BTA) is manufactured with 1 inch Lower Flighting and 1/2 inch Upper Flighting . It has a replaceable Pilot bit, TPB1-175 (A002044) with square shank. Drills hard materials that conventional augers cannot. It is available from stock in diameters of 9 inches to 36 inches.
Application:
The Terex® Texoma Bullet Tooth Auger (BTA) is designed specifically to optimize the drilling performance of digger derricks in extreme drilling conditions.
This auger has a unique cutting pattern that allows each tooth to cut a small track to maximize cutting efficiency and tooth life. The cut pattern and tooth attack angle combine to allow the bullet teeth to act as “fingers” that penetrate through and lift up fractured or broken material.
In many cases, a digger derrick equipped with a spiral BTA can drill in conditions previously requiring a pressure digger.
C
D
B
A
E
NOTE: Graphics are for reference only.
F
G
DIG
GE
R D
ER
RIC
K
AU
GE
R RETURN TO
TABLE OF CONTENTS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 36
Auger, BTA (Bullet) Spiral
A B C D E F G H
PART NO. HEX AUGER FLIGHT UPPER FLIGHT LOWER FLIGHT FLIGHT
PITCH inch mm
PILOT BIT DIAMETER SIZE LENGTH LENGTH THICKNESS THICKNESS
inch mm inch mm inch mm inch mm inch mm inch mm
65345802TU 18 457 2.50 51 104 2642 60 1524 0.50 7.9 1.00 25.4 12 305 A002044
65343272TU 18 457 2.62 67 104 2642 60 1524 0.50 7.9 1.00 25.4 12 305 A002044
65345803TU 20 508 2.50 51 104 2642 60 1524 0.50 7.9 1.00 25.4 15 381 A002044
65343273TU 20 508 2.62 67 104 2642 60 1524 0.50 7.9 1.00 25.4 15 381 A002044
Custom Options Available Upon Request - Pitch - Diameter - Chart dimensions are nominal and will vary slightly based on material specification & manufacturing tolerances. - See Contact Information Below
BTA Spiral
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 37
Auger, BTA (Bullet) Spiral (Hex Pilot)
C
D
B
A
E
NOTE: Graphics are for reference only.
F
RETURN TO TABLE OF CONTENTS
G
Specifications:
Texoma® Spiral Bullet Tooth Auger (BTA) is manufactured with 1 inch Lower Flighting and 1/2 inch Upper Flighting . It has a replaceable pilot bit, 65343336TU, with hex shank. Drills hard materials that conventional augers cannot. It is available from stock in diameters of 9 inches to 36 inches.
Application:
The Terex® Texoma Spiral Bullet Tooth Auger (BTA) is designed specifically to optimize the drilling performance of digger derricks in extreme conditions.
This auger has a unique cutting pattern that allows each tooth to cut a small track to maximize cutting efficiency and tooth life. The cut pattern and tooth attack angle combine to allow the bullet teeth to act as “fingers” that penetrate through and lift up fractured or broken material.
In many cases, a digger derrick equipped with a spiral BTA can drill in conditions previously requiring a pressure digger.
This tool works with the digger derrick core barrel with extendable pilot bit option to increase functionality & increase productivity. (See core barrel options on next page.)
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 38
Auger, BTA (Bullet) Spiral (Hex Pilot)
AUGER HEX AUGER FLIGHT
DIAMETER SIZE LENGTH LENGTH inch mm inch mm inch mm inch mm
65345764TU 9 229 2.62 67 104 2642 60 1524
65345763TU 18 457 2.50 51 104 2642 60 1524
65343341TU 20 508 2.62 67 104 2642 60 1524
Custom Options Available Upon Request - Pitch
- Diameter
RETURN TO TABLE OF CONTENTS
UPPER FLIGHT LOWER FLIGHT
FLIGHT PITCH
inch mm PILOT BIT
inch mm inch mm
0.50 12.7 1.00 25.4 12 305 65343336TU
0.50 12.7 1.00 25.4 12 305 65343336TU
0.50 12.7 1.00 25.4 7 178 65343336TU
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 39
Core Barrel / Extendable Pilot Bit
Custom Options Available Upon Request - Pitch
- Diameter RETURN TO TABLE OF CONTENTS
Features:
Texoma® digger derrick core barrel, extendable pilot & auger combinations are available in a range of diameters. The auger comes with a bolt-on, hex pilot which, when removed, allows it to accept the core barrel and extendable pilot bit options while keeping the auger on the machine, thus saving valuable time in the field.
The extendable pilot used with the barrel allows for an easy start and provides additional stability in extremely hard rock or out-of-level surfaces.
EXTENDABLE PILOT
HEX LENGTH inch mm inch mm
65343343TU 2.62 67 60 1524
CORE BARRELL
HEX BARREL WALL
DIAMETER SIZE LENGTH THICKNESS inch mm inch mm inch mm inch mm
65345765TU 18 457 2.62 67 30 762 .62 15.9
65343342TU 20 508 2.62 67 30 762 .62 15.9
65347732TU 24 610 2.62 67 30 762 .62 15.9
65347733TU 30 762 2.62 67 30 762 .62 15.9
65347734TU 36 914 2.62 67 30 762 .62 15.9
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 40
Accessories
Boring Head
Shank Plate
Teeth
Pilot Bit
& Adapter (PBA)
29200
VIEW TEETH & BLOCK
SELECTION
Bolt
2481517
Nut 5973
Bolt 42675
Nut 5991
Bolt 2442575
Nut
2481518
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 41
Shank Plates & Boring Head, TX-Series
NOTES:
1) Shank plates are sold individually and without teeth. Two plates are required per auger.
2) Teeth must be purchased separately.
3) Plow bolts are included with shank plate orders (PN 2481517 & 2481518)
PART NO. DESCRIPTION
AUGER DIAMETER
inch mm
TEETH REQUIRED*
PLOW
BOLTS**
BORING HEAD
2429301 TX810X
9
10
229
254
1 per shank 1 2479084
2429302 TX12X 12 305 2 per shank 1 A079085
2429224 TX145X 14 356 2 per shank 2 A079094
TX16X1 16 406 2 per shank 2 A079086
TX16X2 16 406 2 per shank 2 A079086
2429220 TX18X1 18 457 3 per shank 2 A079083
2429191 TX20X1
20
22
508
559
3 per shank 2 A079088
2429189
2429190
RETURN TO TABLE OF CONTENTS
VIEW TEETH & BLOCK
SELECTION
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 42
Shank Plates & Boring Head, TX-Series
NOTES:
1) Shank plates are sold individually and without teeth. Two plates are required per auger.
2) Teeth must be purchased separately.
3) Plow bolts are included with shank plate orders (PN 2481517 & 2481518)
PART NO. DESCRIPTION
AUGER DIAMETER
inch mm
TEETH REQUIRED*
PLOW
BOLTS**
BORING HEAD
2429193 TX24X1 24 610 3 per shank 3 A079089
29194 TX24X2 24 610 4 per shank 3 A079089
29199 TX30X1 30 762 4 per shank 4 A079090
29248 TX30X2 30 762 4 per shank 4 A079090
2429249 TX36X1 36 914 4 per shank 4 A079091
65340693 TX42X1 42 1067 6 per shank 6 65340692
65340697 TX48X1 48 1219 7 per shank 6 65340696
RETURN TO TABLE OF CONTENTS
VIEW TEETH & BLOCK
SELECTION
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 43
Shank Plates, TXCS Series
NOTES:
1) Plates interchange on augers and come with teeth. Replacement tooth PN 2429914 (.87 series) for plates are sold individually. Two plates are required per auger assembly.
2) Interchanges with most major brands
3) Plow bolts are included with shank plate orders (PN 2481517 & 2481518)
PART NO. DESCRIPTION
(Plates with TX87LR teeth, .86 Shank)
AUGER DIAMETER
inch mm
BOLT SPACING
inch mm
PLOW
BOLTS**
2429960 C-016 Plate with Teeth 16 406 2.38 61 2
2429961 C-018 Plate with Teeth 18 457 3.75 95 2
2429962 C-020 Plate with Teeth 20 508 4.43 113 2
2429965 C-024-3 Plate with Teeth 24 610 3.50 89 3
RETURN TO TABLE OF CONTENTS
VIEW TEETH & BLOCK
SELECTION
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 44
PART NO. HEX HUB SIZE
inch mm
2429570 2 .00 51
29641 2.50 64
2470463 2.62 67
A000474 3.00 76
Hex Hubs
PART NO. HUB SIZE
inch mm HEX SIZE
A000099 2.62 67 2.00 51 3.38 86
A000100 2.50 64 2.00 51 3.38 86
A000853 2.50 64 2.62 67 3.38 86
A
Adapters, Kelly Bar, Hex
A000853
See also Slip-On Couplers
A
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 45
WELDMENT PART NO.
HEX HUB PART NO.
BAR PART NO.
A
HEX HUB SIZE inch mm
B
BAR SIZE inch mm
80600 2429570 2480597 2.00 51 2.00 51 72 1829
2484698 2429570 2484921 2.00 51 2.50 64 72 1829
82154 29641 2480597 2.50 64 2.00 51 72 1829
2471579 29641 2480598 2.50 64 2.50 64 72 1829
2480601 29641 2480599 2.50 64 2.62 67 72 1829
2481388 2470463 2480598 2.62 67 2.50 64 72 1829
80602 2470463 2480599 2.62 67 2.62 67 72 1829
C
BAR LENGTH inch mm
65343450TU 29641 9122145TU 2.50 64 2.50 64 60 1524
65345762TU 2470463 54911TU 2.62 67 2.62 67 60 1524
Graphic is for representation purposes only.
Kelly Bar, Hex (Welded Option)
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 46
HEX BAR PART NO.
HEX SIZE
inch mm
LENGTH
inch mm
* 11579TU 2.00 51 60 1524
2480597 2.00 51 72 1829
* 9122145TU 2.50 64 60 1524
2480598 2.50 64 72 1829
** 54911TU 2.62 67 60 1524
2480599 2.62 67 72 1829
Coupler Assemblies
Extension, Hex Kelly Bar (Solid)
Note: * These Kelly Bars are heat treated alloy steel for high torque applications and are factory install on all Terex Digger Derricks.
** 54911TU for MKIII & 2-Speed Eskridge models
S = Slip-On
C=Clamp-On
STYLE PART NO. APPLICATION HEX SIZE
inch mm COUPLER
S 431389TU Mark I & Eskridge 2.00 51 2.00 51 41801
S 437927TU Mark II, III, IV & Eskridge 2.00 51 2.62 67 78332
C 9127787TU Mark I, II & Eskridge 2.50 64 2.00 51
C 9119389 Mark II & Eskridge 2.50 64 2.50 64
S 431390TU Mark II, III, IV & Eskridge 2.50 64 2.62 67 402332
S 45143 Mark II & Eskridge 2.62 67 2.62 67 41616
S 462768TU Mark II, III, IV & Eskridge 3.00 76 2.62 67 462767
HEX SIZE
inch mm
11448TU 2 inch—2-5/8 inch Bushing 2.00 51 2.62 67
11448TUU
*
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
Graphic is for representation purposes only.
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 47
ASSEMBLY PART NO.
APPLICATION COUPLER PART NO.
COUPLER INPUT SHAFT
inch mm
KELLY BAR HEX
inch mm
BAR PART NO.
KELLY BAR LENGTH
inch mm
44523TU
Auger Extension / Screw Anchor Drive Tool
1.62 DIA HOLE THRU (2.16 OD x 1.46 ID SQ TUBE FOR DRIVING ANCHORS)
78332TU 2.00 51 2.62 67 422108TU 93.50 1105
402331TU
Auger Extension / Screw Anchor Drive Tool
1.62 DIA HOLE THRU (2.16 OD x 1.46 ID SQ TUBE FOR DRIVING ANCHORS)
402332TU 2.50 64 2.62 67 422108TU 93.50 1105
402330TU
Auger Extension / Screw Anchor Drive Tool
1.62 DIA HOLE THRU (2.16 OD x 1.46 ID SQ TUBE FOR DRIVING ANCHORS)
41616TU 2.62 67 2.62 67 422108TU 93.50 1105
470331TU
Auger Extension / Screw Anchor Drive Tool
1.62 DIA HOLE THRU (2.16 OD x 1.46 ID SQ TUBE FOR DRIVING ANCHORS)
41616TU 2.62 67 2.62 67 470332TU 93.50 1105
Application:
Hollow Kelly Bar with spring loaded cam action locking dogs allows it to be used as both an auger extension shaft and a screw anchor drive. This allows the screw anchor rod to be inserted directly into the Kelly Bar and eliminates the need for a screw anchor adapter.
Eliminates lifting and handling of heavy screw anchor adapters
Allows quicker screw anchor setup time
Spring loaded cam action dogs allow one-man insertion of anchor rod.
Assembly, Hex Kelly Bar Extension (Hollow) with Slide-on Coupler
RETURN TO TABLE OF CONTENTS
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 48
Standard Pilot Bits & Adapters
(Page 1 of 2)
TU PN CODE DESCRIPTION
2429168 TX205D
Dirt bit, cast steel fishtail, standard on TXD series augers.
Dirt, compacted soil, clay material.
Includes hardware PN 2442725 & 5991.
29665 TX205C
Carbide bit, standard on TXC series augers.
Includes hardware PN 2442725 & 5991.
29200 TX183
Pilot bit adapter, TX183, Cast Steel
(standard with TX205C & TX205D)
Includes hardware 42675 & 5973.
29936 C6 1/2 87 C387LR
Bit, standard on TXCS series augers. Five replaceable teeth, PN 2429914. Bolts into boring head.
Includes hardware PN 42675 & 5973.
RETURN TO TABLE OF CONTENTS
VIEW TEETH & BLOCK
SELECTION
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 49
Standard Pilot Bits & Adapters
(Page 2 of 2)
TU PN CODE DESCRIPTION
16845 TPB6
Carbide bit, 2.38 API Threads, 3-way step type. Standard on TRA series au-gers.
Use with 80342 sub.
80342 Collar Sub, pilot, 4” diameter, 2.38” API
A002044 TPB1-175
Bit, 1.75” square shank, standard on BTA series augers. Four replaceable teeth, PN A001375.
Use with 2429894 sub.
Includes hardware PN 42675 & 5973.
2429894 TBA-175 Sub, 1.75” square collar
65343336 TPB1-HEX
Bit, 2.63” hex shank, BTA series au-gers. Four replaceable teeth, PN A001375.
Use with 65343434 sub.
Includes hardware PN 42675 & 5973.
65343434 TBA-HEX Sub, 2.63” Hex collar
RETURN TO TABLE OF CONTENTS
VIEW TEETH & BLOCK
SELECTION
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 50
Optional Pilot Bits & Adapters
TU PN CODE DESCRIPTION
2429167 TX50D
Pilot bit, 7.5” cast steel, replaceable tooth pilot bit. Bolts directly to boring head; no adapter needed. For dirt, compacted soil, stiff clay, fracturable material & gravel application.
Includes TX50 & TX52 hardened steel teeth (PN 2429171 & 2429429) & hardware PN 42675 & 5973.
85889 TX50C
Pilot bit, 7.5” cast steel, replaceable tooth pilot bit. Bolts directly to boring head; no adapter needed. For fractured & non-fracturable material, hard pan, frozen soil, cement, limestone & conglomerates application.
Includes TX50 & TX52 hardened steel teeth (PN A029225 & A029400) & hardware PN 42675 & 5973.
A017437 TXBA9
Adapter, pilot bit. Bolts directly to boring head and allows use of all 2.38” API pin pilot bits.
Includes hardware PN 42675 & 5973.
70797 TPB1
Bit, 2.38” API Threads, option on BTA series augers. Four replaceable teeth, PN A001375.
Use with 80342 sub.
2429948 CP-16 Pilot bit, 2.00” cut with 1.00” NC thread
29934 TXCP-18 Pilot bit, 2.00” cut with 1.25” Acme threads
A000142 CP-18 Collar Pilot chuck, 1.25” 5 Acme
RETURN TO TABLE OF CONTENTS
VIEW TEETH & BLOCK
SELECTION
DIG
GE
R D
ER
RIC
K
AU
GE
R
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 51
BARREL TOOLS
RETURN TO TABLE OF CONTENTS
BA
RR
EL
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 52
Spin-Bottom, Drill Bucket
Specifications:
3/4” wall thickness* * Custom wall thicknesses available
Standard 40” barrel length
Choice of teeth:
Choice of pilot bits (refer to foundation auger tool section for options)
Application:
Used for drilling loose sandy soil, small cobble stones and mud conditions when material will generally not adhere to the auger flighting.
PART NO. CODE NO. DESCRIPTION APPLICATION
2429436 TX212 TX212 carbide tooth Fits W05 Block.
2429817 201 Heat-treated dirt tooth regular gauge
Normal dirt digging situations.
2429450 211 Heat-treated dirt tooth outside gauge tooth
Outside tooth for normal dirt digging situations.
2429888 TK225 Four tip conical carbide 1/2” thick. conical carbide brazed
Rock cutting tooth heat treated for strength and durability.
A001537 RC31HD Heat treated alloy steel body, sharp-nose carbide tip, short retainer
For drilling most soils and broken or laminated rock.
Notes:
1) See Page 56 for Ordering Specifications.
2) Custom options available upon request
GO TO TEETH & BLOCK
GO TO KELLY BOX
INFORMATION
RETURN TO TABLE OF CONTENTS
BA
RR
EL
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 53
Spin-Bottom, Clean Out Bucket
Specifications:
3/4” wall thickness standard* * Custom wall thicknesses available
Standard 40” barrel length
3/4” x 4” steel scraper blade
Also known as “muck bucket” or “mud bucket”
Application:
Used to remove fluid type (mud) material from drilled shaft when material generally will not adhere to auger flighting.
GO TO KELLY BOX
INFORMATION
RETURN TO TABLE OF CONTENTS
BA
RR
EL
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 54
Dump-Bottom, Drill Bucket
Specifications:
3/4” wall thickness*
* Custom wall thicknesses available
Standard 40” barrel length
Choice of teeth
Choice of pilot bits (refer to foundation auger
tool section for options)
Standard manual dump mechanism
(auto-dump optional)
Application: Used for drilling loose sandy soil, small cobblestones and mud conditions when material will generally not adhere to the auger flighting.
PART NO. CODE NO. DESCRIPTION APPLICATION
2429436 TX212 TX212 carbide tooth Fits W05 Block.
2429817 201 Heat-treated dirt tooth regular gauge
Normal dirt digging situations.
2429450 211 Heat-treated dirt tooth outside gauge tooth
Outside tooth for normal dirt digging situations.
2429888 TK225 Four tip conical carbide 1/2” thick. conical carbide brazed
Rock cutting tooth heat treated for strength and durability.
A001537 RC31HD Heat treated alloy steel body, sharp-nose carbide tip, short retainer
For drilling most soils and broken or laminated rock.
Notes:
1) See Page 56 for Ordering Specifications
2) Custom options available upon request
GO TO KELLY BOX
INFORMATION
RETURN TO TABLE OF CONTENTS
BA
RR
EL
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 55
Dump-Bottom, Clean Out Bucket
Specifications:
3/4” wall thickness* * Custom wall thicknesses available
Standard 40” barrel length
3/4” x 4” steel scraper blade
Choice of pilot bits (refer to foundation auger tool section for options)
Manual dump mechanism is standard. Option is the auto dump mechanism.
Also known as “muck bucket” or “mud bucket”
Application:
Used to remove fluid type (mud) material from drilled shaft when material generally will not adhere to auger flighting. This bucket is also commonly known as a muck bucket or a mud bucket.
GO TO KELLY BOX
INFORMATION
RETURN TO TABLE OF CONTENTS
BA
RR
EL
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 56
Latch Mechanism
Automatic Dump:
Manual Dump:
RETURN TO TABLE OF CONTENTS
BA
RR
EL
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 57
Core Barrels
Specifications:
3/4” wall thickness*
* Custom wall thicknesses available
Standard 40” barrel length
5-tooth cut pattern
Inner & outer wear bars
Available with bullet tooth, J-tooth, or hex tooth configuration.
Notes:
1) See Page 56 for Ordering Specifications.
2) Custom options available upon request
PART NO. CODE NO. DESCRIPTION APPLICATION
A001376 RB1SR-SN Heat treated alloy steel body, sharp-nose carbide tip, short retainer
Fractured and non-fractured materials, frozen soils, and abrasive materials.
A001404 RC10F Heavy duty block with mounting surface parallel to tooth axis
For buckets, barrels, and special applications.
A001537 RC31HD Heat treated alloy steel body, sharp-nose carbide tip, short retainer
For drilling most soils and broken or laminated rock.
A001405 RC30F Heavy duty block For buckets, barrels, and special applications.
A129932 RJC2 Tooth,RJC2 (center) For high penetration in hard-rock core barrel applications.
A001403 RJR2 Tooth,RJR2 (right) For high penetration in hard-rock core barrel applications.
A001409 RJL2 Tooth,RJL2 (left) For high penetration in hard-rock core barrel applications.
2496804 RJ2 Block,RJ2 Accepts RJ2
A000390
A000388
A000378
HEX TEETH
3/4” HEX
1-1/8” HEX
1-3/4” HEX
Excellent for coring through reinforced concrete (rebar).
GO TO TEETH & BLOCK
GO TO KELLY BOX
INFORMATION
RETURN TO TABLE OF CONTENTS
BA
RR
EL
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 58
Core Barrel Rings
Specifications:
3/4” wall thickness*
* Custom wall thicknesses available
Standard 12” ring height
5-tooth pattern
Inner & outer wear bars
Available with bullet tooth, J-tooth, or hex tooth configuration.
PART NO. CODE NO. DESCRIPTION APPLICATION
A001376 RB1SR-SN Heat treated alloy steel body, sharp-nose carbide tip, short retainer
Fractured and non-fractured materials, frozen soils, and abrasive materials.
A001404 RC10F Heavy duty block with mounting surface parallel to tooth axis
For buckets, barrels, and special applications.
A001537 RC31HD Heat treated alloy steel body, sharp-nose carbide tip, short retainer
For drilling most soils and broken or laminated rock.
A001405 RC30F Heavy duty block For buckets, barrels, and special applications.
A129932 RJC2 Tooth,RJC2 (center) For high penetration in hard-rock core barrel applications.
A001403 RJR2 Tooth,RJR2 (right) For high penetration in hard-rock core barrel applications.
A001409 RJL2 Tooth,RJL2 (left) For high penetration in hard-rock core barrel applications.
2496804 RJ2 Block,RJ2 Accepts RJ2
A000390
A000388
A000378
HEX TEETH
3/4” HEX
1-1/8” HEX
1-3/4” HEX
Excellent for coring through reinforced concrete (rebar).
RETURN TO TABLE OF CONTENTS
GO TO TEETH & BLOCK
GO TO KELLY BOX
INFORMATION
BA
RR
EL
TO
OLS
Notes:
1) See Page 56 for Ordering Specifications.
2) Custom options available upon request
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 59
Buckets & Barrels
DIAMETER
inch mm
16 406 40 1016
18 457 40 1016
20 508 40 1016
22 559 40 1016
24 610 40 1016
28 711 40 1016
30 762 40 1016
34 864 40 1016
36 914 40 1016
42 1067 40 1016
46 1168 40 1016
48 1219 40 1016
54 1372 40 1016
60 1524 40 1016
72 1829 40 1016
LENGTH inch mm
Specifications: Standard barrel length is 40”
Spin-Bottom, Clean out Bucket
3/4” wall thickness* * Custom wall thicknesses available
Dump-Bottom, Clean Out Bucket and Drill Buckets
3/4” standard wall thickness
Core barrels
3/4” standard wall thickness
Notes: Custom options available upon request RETURN TO TABLE OF CONTENTS
BA
RR
EL
TO
OLS
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 60
TEETH & BLOCKS
TE
ET
H &
BLO
CK
S
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 61
PART NO. CODE NO.
DESCRIPTION APPLICATION
2429171 TX50 Tooth, dirt, heat treated
Dirt, compacted soils, low abrasion materials, fits all TX– series shank plates & TX-50 replaceable tooth pilot.
2429429 TX52 Tooth, dirt, outside gauge, heat treated
Dirt, compacted soils, low abrasion materials, fits all TX-series shank plates & TX-50 replaceable tooth pilot. Recommended for outside blocks.
A029225 TX56 Tooth, rock, (carbide) conical, four-tip, heat treated
Fractured and non-fractured materials, frozen soils, abrasive materials. Conical tips increase penetration rates in most materials. Fits all TX-series shank plates & TXC50 pilot.
A029400 TX58
Tooth, rock, (carbide) conical, four-tip, outside gauge, heat treated
Fractured and non-fractured materials, frozen soils, abrasive materials, conical tips increase penetration rates in most materials. Fits all TX-series shank plates & TX50C pilot. Recommended for outside blocks.
65342385TU TX58
Tooth, rock, (carbide) chisel, four-tip, outside gauge, heat treated
Non-fractured materials, frozen soils, abrasive materials. Tips increase penetration rates in most materials. Fits all TX-series shank plates & TX50C pilot. Recommended for outside blocks.
65342386TU TX56 Tooth, rock, (carbide) chisel, four-tip, heat treated
Non-fractured materials, frozen soils, abrasive materials. Tips increase penetration rates in most materials. Fits all TX-Series shank plates & TXC50 pilot.
Teeth, Auger, TX Series
PART NO. DESCRIPTION BLOCK PER
BUCKET LBS
EACH LBS /
BUCKET KGS /
BUCKET PCS/
PALLET LBS /
PALLET KGS /
PALLET 2429171 TOOTH,TX50 shank plates 25 0.93 25.95 11.77 1250 1297.50 588.54
2429429 TOOTH,TX52 shank plates 25 1.15 29.25 13.27 1250 1462.50 663.38
A029225 TOOTH,TX56 shank plates 25 1.10 28.75 13.04 1250 1437.50 652.04
A029400 TOOTH,TX58 shank plates 25 1.20 31.50 14.29 1250 1575.00 714.41
65342385TU TOOTH,TX58 shank plates 25 1.30 27.80 12.61 1250 1390.00 630.49
65342386TU TOOTH,TX56 shank plates 25 1.26 29.15 13.22 1250 1457.50 661.11
Notes:
1) Full pallet of teeth contains 50 buckets
2) These teeth use rubberlock A001277 RETURN TO TABLE OF CONTENTS
TE
ET
H &
BLO
CK
S
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 62
2-1/
2”
1-3
/4”
Teeth & Blocks, Blade Series
PART NO. CODE NO.
DESCRIPTION APPLICATION
2416844 TRT1 3/16” (4.8 mm) THK. Full face rock blade.
Non-fractured material, frozen soil, abrasive material. Medium to hard rock.
A510184 TWT2
3/16” (4.8 mm) THK. Full face gauge rock blade. Tooth cuts 3/4” (19.1 mm) gauge for pocket
Non-fractured material, frozen soil abrasive material. Medium to hard rock.
A029321 TK55C
Four tip conical carbide rock cutter. 3/8” (9.5 mm) THK. Conical brazed and then entire cut is heat treated for strength and durability.
Fractured and non-fractured material. Angle of attack & conical tips increase penetration rates in most augerable materials. Hard to very hard rock.
17318 TDB31 Heat treated dirt blade, with a 45 degree attack angle.
Soft earth digging, and clay materials.
69322 TAP3
ASTM-148 Cast steel tooth block. Tapered slot to reduce tooth chatter.
Accepts all above teeth. Welded with 7018 or 8018 low-hydrogen rod.
PART NO. DESCRIPTION BLOCK PER
BUCKET LBS
EACH LBS /
BUCKET KGS /
BUCKET PCS/
PALLET LBS /
PALLET KGS /
PALLET
2416844 TOOTH,TRT1 69322 25 1.05 27.55 12.50 1250 1377.50 624.82
A510184 TOOTH,TWT2 69322 25 1.10 29.05 13.18 1250 1452.50 658.84
A029321 TOOTH,TK55C 69322 25 1.21 31.75 14.40 1250 1587.50 720.01
17318 TOOTH,TDB31 69322 20 1.45 29.80 13.52 1000 1490.00 675.85
69322 BLOCK NA 25 1.20 30.25 13.72 1250 1512.50 686.06
Notes:
1) Full pallet of teeth contains 50 buckets
2) These teeth use roll pin 2443223
2-3
/8”
5/8
”
2-7
/8”
1-1
/8”
1-3
/4”
1-3
/4”
1-3
/4”
2-3
/4”
2-1/2”
1-15/16”
1/2
”
RETURN TO TABLE OF CONTENTS
TE
ET
H &
BLO
CK
S
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 63
PART NO. CODE NO. DESCRIPTION APPLICATION
A001375 RB1LRSN Heat treated alloy steel body, sharp-nose carbide tip, long retainer
Small diameter tip reduces vibration during concrete cutting.
A001371 RB3LR Heat treated alloy steel body, sharp-nose carbide tip, long retainer
Fractured and non-fractured materials, frozen soils, and abrasive materials.
A001379 RB3SR Heat treated alloy steel body, sharp-nose carbide tip, short retainer
Fractured and non-fractured materials, frozen soils, and abrasive materials.
2429912 RL08/C3LR Heat treated alloy steel body, sharp-nose carbide tip, long retainer
Cutting concrete and other tough cutting applications
2429913 RL09/C3SR94 Heat treated alloy steel body, sharp-nose carbide tip, short retainer
For cutting concrete and other tough cutting applications.
2429911 TX1HDSR/
RL10/C1HDSR
Heat treated alloy steel body, sharp-nose carbide tip, short retainer
For drilling concrete and rock cutting. Double-angle tip provides maximum impact strength.
A001376 RB1SR-SN Heat treated alloy steel body, sharp-nose carbide tip, short retainer
Fractured and non-fractured materials, frozen soils, and abrasive materials.
2429941 C10 Heavy duty tooth block; 45° mounting surface
Has a narrower face than C10HD style. Welded with 7018 or 8018 low-hydrogen rod.
29942 C10HD Extra heavy duty block; 45° mounting surface
Extra-heavy-duty design. Welded with 7018 or 8018 low-hydrogen rod.
A001404 RC10F Heavy duty block with mounting surface parallel to tooth axis
For buckets, barrels, and special applications. Welded with 7018 or 8018 low-hydrogen rod.
Teeth & Blocks, Bullet , .76, TC10 Series
PART NO. DESCRIPTION SHANK
SIZE PER
BUCKET LBS EA
LBS / BUCKET
KGS / BUCKET
PCS/
PALLET
LBS / PALLET
KGS / PALLET
A001375 TOOTH,RB1LRSN 0.76 75 0.47 38.95 17.67 3750 1947.50 883.37
A001371 TOOTH,RB3LR 0.76 75 0.45 38.05 17.26 3750 1902.50 862.96
A001379 TOOTH,RB3SR 0.76 75 0.44 35.05 15.90 3750 1752.50 794.92
2429912 TOOTH,RL08/C3LR 0.76 75 0.45 36.75 16.67 3750 1837.50 833.48
2429913 TOOTH,RL09/C3SR94 0.76 75 0.40 34.25 15.54 3750 1710.00 775.64
2429911 TOOTH,TX1HDSR 0.76 75 0.50 37.70 17.10 3750 1885.00 885.02
2429941 BLOCK,C10 0.76 50 1.10 56.50 25.63 2500 2825.00 1281.40
29942 BLOCK,C10HD 0.76 25 1.19 29.00 13.15 1250 1450.00 657.71
A001404 BLOCK,RC10F 0.76 50 0.71 36.95 16.76 2500 1847.50 838.02
A001376 TOOTH,RB1SR-SN 0.76 75 0.45 36.70 16.65 3750 1835.00 832.34
Note: Full pallet of teeth contains 50 buckets RETURN TO TABLE OF CONTENTS
TE
ET
H &
BLO
CK
S
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 64
PART NO. CODE NO. DESCRIPTION APPLICATION
2429897 C21 Heat treated alloy steel body, sharp-nose carbide tip, short retainer
For most cutting applications. Especially good in soft to medium-hard material. Carbide tip (5/16” dia.) for fast penetration.
2429898 C21HD Heat treated alloy steel body, sharp-nose carbide tip, short retainer
Heavy duty design for extremely hard rock and concrete. Carbide tip (1/2” dia.) provides long tool life.
2429900 C23 Heat treated alloy steel body, sharp-nose carbide tip, short retainer
Drilling and core-barreling in soft to medium-hard rock with abrasive cutting conditions.
65340029 C23 Heat treated alloy steel body, sharp-nose carbide tip, short retainer
Drilling and core-barreling in soft to medium-hard rock with abrasive cutting conditions.
2429901 C24 Heat treated alloy steel body, sharp-nose carbide tip, short retainer
Drilling soft material. Sharp nose tip for high penetration.
A001378 RB21SN Heat treated alloy steel body, sharp-nose carbide tip, short retainer
Sharp nose provides fast penetration.
A001373 RB23 Heat treated alloy steel body, sharp-nose carbide tip, short retainer
Soft to medium-hard rock with abrasive conditions.
2429939 C20HD Extra heavy duty block; 45° mounting surface
Heavier block design than the C20 block. Welded with 7018 or 8018 low-hydrogen rod.
2429938 RC20 Heavy duty block; 45° mounting surface
Thinner width allows closer block placement in restricted areas. Welded with 7018 or 8018 low-hydrogen rod.
Teeth & Blocks, Bullet, .74, TC20 Series
PART NO. DESCRIPTION SHANK
SIZE PER
BUCKET LBS
EACH LBS /
BUCKET KGS /
BUCKET PCS/
PALLET LBS /
PALLET KGS /
PALLET
2429897 TOOTH,C21 0.74 75 0.39 29.65 13.45 3750 1482.50 672.45
2429898 TOOTH,C21HD 0.74 75 0.49 38.70 17.55 3750 1935.00 877.70
2429900 TOOTH,C23 0.74 75 0.41 33.05 14.99 3750 1652.50 749.56
65340029 TOOTH,C23 0.74 75 0.42 33.00 14.97 3750 1650.00 748.43
2429901 TOOTH,C24 0.74 75 0.38 28.70 13.02 3750 1435.00 650.91
A001378 TOOTH,RB21SN 0.74 75 0.50 36.30 16.47 3750 1815.00 823.27
A001373 TOOTH,RB23 0.74 75 0.46 34.15 15.49 3750 1707.50 774.51
2429939 BLOCK,C20HD 0.74 25 1.18 29.85 13.54 1250 1492.50 676.99
2429938 BLOCK,RC20 0.74 50 0.65 27.30 12.38 2500 1365.00 619.15
Note: Full pallet of teeth contains 50 buckets
RETURN TO TABLE OF CONTENTS
TE
ET
H &
BLO
CK
S
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 65
Teeth & Blocks, Bullet, 1”, TC30 Series
(Page 1 of 2)
PART NO. CODE NO. DESCRIPTION APPLICATION
29919 C31 Heat treated alloy steel body, sharp-nose carbide tip, short retainer
For soft to hard rock and concrete. Carbide tip (3/8” dia.) provides strength and long tool life.
2429821 C32 Heat treated alloy steel body, sharp-nose carbide tip, short retainer
For drilling most soils and broken or laminated rock.
A001370 RB31HD Heat treated alloy steel body, sharp-nose carbide tip, short retainer
For drilling most soils and broken or laminated rock.
A001377 31SN-FL Heat treated alloy steel body, sharp-nose carbide tip, short retainer
For drilling most soils and broken or laminated rock.
A001372 RB40XHD Heat treated alloy steel body, sharp-nose carbide tip, short retainer
For drilling most soils and broken or laminated rock.
A001537 RC31HD Heat treated alloy steel body, sharp-nose carbide tip, short retainer
For drilling most soils and broken or laminated rock.
2429228 TX40HD Heat treated alloy steel body, sharp-nose carbide tip, short retainer
For drilling most soils and broken or laminated rock.
PART NO. DESCRIPTION SHANK
SIZE PER
BUCKET LBS
EACH LBS /
BUCKET KGS /
BUCKET PCS/
PALLET LBS /
PALLET KGS /
PALLET
29919 TOOTH,C31 0.99 25 1.06 27.35 12.41 1250 1367.50 620.29
2429821 TOOTH,C32 0.99 25 1.08 28.10 12.75 1250 1405.00 637.30
A001370 TOOTH,RB31HD 0.99 40 1.09 43.85 19.89 2000 2192.50 994.50
A001377 TOOTH,31SN-FL 0.99 25 1.05 26.85 12.18 1250 1342.50 608.95
A001372 TOOTH,RB40XHD 0.99 30 1.37 42.55 19.30 1200 1702.00 773.64
A001537 TOOTH,RC31HD 0.99 25 1.01 26.80 12.16 1500 1340.00 607.82
2429228 TOOTH,TX40HD 0.99 25 1.38 34.50 15.65 1250 1725.00 782.45
Note: Full pallet of teeth contains 50 buckets
A001372 Full pallet is 40 buckets
A001537 Full pallet is 60 buckets
RETURN TO TABLE OF CONTENTS
TE
ET
H &
BLO
CK
S
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 66
Teeth & Blocks, Bullet, 1”, TC30 Series
(Page 2 of 2)
PART NO. CODE NO. DESCRIPTION APPLICATION
2469176 C30 Heavy duty block; 45° mounting surface
Accepts all short retainer teeth. Welded with 7018 or 8018 low-hydrogen rod.
29947 C30H/U40H Extra heavy duty block; 45° mounting surface
Accepts all short retainer and snap ring teeth. Welded with 7018 or 8018 low-hydrogen rod.
A001405 RC30F Block used for core barrels.
For buckets, barrels, and special applications. Welded with 7018 or 8018 low-hydrogen rod.
PART NO. DESCRIPTION SHANK
SIZE PER
BUCKET LBS
EACH LBS /
BUCKET KGS /
BUCKET PCS/
PALLET LBS /
PALLET KGS /
PALLET
2469176 BLOCK,C30 0.99 15 3.10 47.15 21.39 750 2357.50 1069.34
29947 BLOCK,C30H/U40H 0.99 8 3.95 32.55 14.76 400 1627.50 738.22
A001405 BLOCK,RC30F 0.99 15 1.30 20.10 9.12 750 1005.00 455.86
Note: Full pallet of teeth contains 50 buckets
RETURN TO TABLE OF CONTENTS
TE
ET
H &
BLO
CK
S
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 67
Teeth & Blocks, Bullet, .86, TC87 Series
PART NO. DESCRIPTION SHANK
SIZE PER
BUCKET LBS
EACH LBS /
BUCKET KGS /
BUCKET PCS
PALLET LBS /
PALLET KGS /
PALLET
29918 TOOTH,AR15087LR 0.86 40 0.95 38.55 17.49 2000 1927.50 874.30
2429966 TOOTH,AR15087ST 0.86 40 0.90 36.00 16.33 2000 1800.00 816.47
2429914 TOOTH,C87LR 0.86 60 0.59 35.60 16.15 3000 1780.00 807.39
29945 BLOCK,C87B 0.86 40 0.95 38.05 17.26 2000 1902.50 862.96
29946 BLOCK,C87HDS 0.86 25 1.12 28.45 12.90 1250 1422.50 645.24
PART NO. CODE NO. DESCRIPTION APPLICATION
29918 AR150-87LR
Heat treated alloy steel body, sharp-nose carbide tip, long retainer
Asphalt and other soft to medium-hard conditions. Carbide cutting edge for added protection.
2429966 AR150-87ST All-hardened steel cutting face
Asphalt and other soft to medium-hard conditions. All hardened steel tool.
2429914 TX87LR
Heat treated alloy steel body, sharp-nose carbide tip, long retainer
Hard rock or concrete. Sharp tip for improved penetration.
29945 C87B Heavy duty block; 45° mounting surface
Heavy duty design (has machined step for non-rotating tools). Welded with 7018 or 8018 low-hydrogen rod.
29946 C87HDS Extra heavy duty block; 45° mounting surface
Extra heavy duty design (has machined shoulder in bore to provide extended life. Welded with 7018 or 8018 low-hydrogen rod.
Note: Full pallet of teeth contains 50 buckets
RETURN TO TABLE OF CONTENTS
TE
ET
H &
BLO
CK
S
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 68
PART NO. CODE NO. DESCRIPTION APPLICATION
*A029927 C41 Heat treated alloy steel body, sharp-nose carbide tip w/retainer clip
For large diameter extra heavy duty style augers.
*2429926 C4/U44 Heat treated alloy steel body, sharp-nose carbide tip w/retainer clip
For large diameter extra heavy duty style augers.
A001532 RCDS05 Heat treated alloy steel body, sharp-nose carbide tip, long retainer
For drilling and tunnel boring in the most extreme hard rock and concrete.
*2429930 C7 Heat treated alloy steel body, sharp-nose carbide tip w/retainer clip
For most cutting conditions. No collar.
A000789 DS05 Heat treated alloy steel body, sharp-nose carbide tip, long retainer
For drilling and tunnel boring in the most extreme hard rock and concrete.
A001536 RC4SHF Heat treated alloy steel body, sharp-nose carbide tip, long retainer
For drilling in soft to medium-hard cutting conditions. Sharp nose profile for maximum penetration.
*A001402 RC4SSF Heat treated alloy steel body, sharp-nose carbide tip w/retainer clip
For drilling in soft to medium-hard abrasive cutting conditions. Snap ring attached.
Teeth & Blocks, Bullet, Step, TC4 Series
(Page 1 of 2)
PART NO. DESCRIPTION STYLE PER
BUCKET LBS
EACH LBS /
BUCKET KGS /
BUCKET PCS/
PALLET LBS /
PALLET KGS /
PALLET
A029927 TOOTH,C41 STEP 15 2.58 40.05 18.17 750 2002.50 908.32
2429926 TOOTH,C4 STEP 15 2.60 40.25 18.26 750 2012.50 912.86
A001532 TOOTH,RCDS05 STEP 15 2.52 39.05 17.71 750 1952.50 885.64
2429930 TOOTH,C7 STEP 15 2.30 35.15 15.94 750 1757.50 797.19
A000789 TOOTH,DS05 STEP 12 2.52 30.51 13.87 600 1576.00 714.86
A001536 TOOTH,RC4SHF STEP 15 2.55 39.30 17.83 750 1965.00 891.31
A001402 TOOTH,RC4SSF STEP 10 2.54 25.95 11.77 500 1297.50 588.54
Notes:
1) Full pallet of teeth contains 50 buckets
2) *These teeth use A000679 snap ring (pliers PN A000752 / disposable pliers PN A000137) or retainer
clip PN 65343300TU (push-on style).
RETURN TO TABLE OF CONTENTS
TE
ET
H &
BLO
CK
S
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 69
PART NO. DESCRIPTION STYLE PER
BUCKET LBS
EACH LBS /
BUCKET KGS /
BUCKET PCS
PALLET LBS /
PALLET KGS /
PALLET
A001401 TOOTH,RC4LSF STEP 10 3.09 31.55 14.31 500 1577.50 715.54
A001639 TOOTH,RC450 STEP 15 2.20 34.25 15.54 750 1712.50 776.78
70796 BLOCK, RC4 STEP 10 3.60 35.80 16.24 500 1790.00 811.93
A001406 BLOCK,RC4F STEP 8 2.43 20.45 9.28 400 1022.50 463.80
Teeth & Blocks, Bullet, Step, TC4 Series
(Page 2 of 2)
Notes:
1) Full pallet of teeth contains 50 bucket.
2) *These teeth use A000679 snap ring (pliers PN A000752 / disposable pliers PN A000137) or retainer clip
PN 65343300TU (push-on style).
PART NO. CODE NO. DESCRIPTION APPLICATION
*A001401 RC4LSF Heat treated alloy steel body, sharp-nose carbide tip w/retainer clip
For medium to hard drilling conditions with added collar to prevent material from entering block and stopping tooth rotation.
*A001639 RC450F Heat treated alloy steel body, sharp-nose carbide tip w/retainer clip
For drilling in soft to medium-hard cutting conditions. Sharp nose profile for maximum penetration. Extra long gauge length for added penetration.
70796 RC4 Heavy duty block; 45° mounting surface
Heavy duty design accepts all step shank tools. Welded with 7018 or 8018 low-hydrogen rod.
A001406 RC4F Heavy duty block with mounting surface parallel to tooth axis
For buckets, barrels, and special applications. Welded with 7018 or 8018 low-hydrogen rod.
RETURN TO TABLE OF CONTENTS
TE
ET
H &
BLO
CK
S
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 70
PART NO. CODE NO. DESCRIPTION APPLICATION
2429817 201 Heat-treated dirt tooth regular gauge
Normal dirt digging situations.
2429450 211 Heat-treated dirt tooth outside gauge tooth
Outside tooth for normal dirt digging situations.
2429888 TK225 Four tip conical carbide 1/2” thick. brazedconical carbide
Rock cutting tooth heat treated for strength and durability.
2429436 TX212 TX212 carbide tooth Fits W05 block.
V005053 134 Dirt tooth, extra-wide 5” Normal dirt digging situations.
A001407 RST200P Block For all Taper-Fit Series teeth. Welded with 7018 or 8018 low-hydrogen rod.
A000858 WO5 Block For all Taper-Fit Series teeth. Welded with 7018 or 8018 low-hydrogen rod.
Teeth & Blocks, Taper-Fit Series
PART NO. DESCRIPTION STYLE PER
BUCKET LBS
EACH LBS /
BUCKET KGS /
BUCKET PCS/
PALLET LBS /
PALLET KGS /
PALLET
2429817 TOOTH,DIRT,201 Taper-Fit 20 2.38 47.45 21.52 1000 2372.50 1076.15
2429450 TOOTH,DIRT,211 Taper-Fit 15 2.40 37.60 17.06 750 1880.00 852.75
2429888 TOOTH,TK225 Taper-Fit 15 2.72 42.00 19.05 750 2100.00 952.54
2429436 TOOTH,TX212 Taper-Fit 15 2.55 39.20 17.78 750 1960.00 889.04
V005053 TOOTH,DIRT,134 Taper-Fit 3.64
A001407 BLOCK,RST200P Taper-Fit 15 1.85 29.30 13.29 750 1465.00 664.51
A000858 BLOCK,W05 HD Taper-Fit 8 3.25 27.30 12.38 400 1365.00 619.15
Note:
1) Full pallet of teeth contains 50 buckets
2) All these teeth use horseshoe nails (A000010) or rubberlock (A001277)
5-7/8”
5-5/8”
2-1
/2”
3-3
/8”
RETURN TO TABLE OF CONTENTS
TE
ET
H &
BLO
CK
S
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 71
PART NO. CODE NO. DESCRIPTION APPLICATION
11376 T101 Heat-treated dirt tooth regular gauge
Normal dirt digging situations.
11370 TO2 Dirt 101 block Flat half pocket that accepts T101 tooth. Welded with 7018 or 8018 low-hydrogen rod.
Teeth & Blocks, Taper-Fit Series
PART NO. DESCRIPTION STYLE PER
BUCKET LBS
EACH LBS /
BUCKET KGS /
BUCKET PCS/
PALLET LBS /
PALLET KGS /
PALLET
11376 TOOTH,T101 Taper-Fit 30 1.05 32.25 14.63 1500 1612.50 731.42
11370 BLOCK,T02 Taper-Fit 50 0.78 38.45 17.44 2500 1922.50 872.03
Notes:
1) Full pallet of teeth contains 50 buckets
2) These teeth use horseshoe nails (A000010) or rubberlock (A001277)
2-5/
8”
4-1/4”
RETURN TO TABLE OF CONTENTS
TE
ET
H &
BLO
CK
S
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 72
Core Barrel Teeth & Blocks
NOTE: Right Hand, Left Hand, & Center tooth combination works well in reinforced rebar concrete situations.
PART NO. CODE NO. DESCRIPTION APPLICATION
A129932 RJC2 Tooth,RJC2 (center) For high penetration in hard-rock core barrel applications.
A001403 RJR2 Tooth,RJR2 (right) For high penetration in hard-rock core barrel applications.
A001409 RJL2 Tooth,RJL2 (left) For high penetration in hard-rock core barrel applications.
2496804 RJ2 Block,RJ2 Accepts RJ2 teeth only. Welded with 7018 or 8018 low-hydrogen rod.
2429457 TXCB10 Tooth,TXCB10 For high penetration in hard rock core-barrel applications.
2429471 TXH10 Block,TXH10 Accepts TXCB10 teeth only. Welded with 7018 or 8018 low-hydrogen rod.
2429933 U7L/CU7L Tooth,TU7 For high penetration in hard-rock core barrel applications. This tooth is welded on to core barrel.
A000390
A000388
A000378
HEX TEETH
3/4” HEX
1-1/8” HEX
1-3/4” HEX
Excellent for coring through reinforced concrete (rebar).
PART NO. DESCRIPTION STYLE PER
BUCKET LBS
EACH LBS /
BUCKET KGS /
BUCKET PCS/
PALLET LBS /
PALLET KGS /
PALLET
A129932 TOOTH,RJC2 CORBAR 50 0.60 31.80 14.42 2500 1590.00 721.21
A001403 TOOTH,RJR2 CORBAR 50 0.66 34.75 15.76 2500 1737.50 788.12
A001409 TOOTH,RJL2 CORBAR 50 0.65 33.95 15.40 2500 1697.50 769.97
2496804 BLOCK,RJ2 CORBAR 50 0.52 27.20 12.34 2500 1360.00 616.89
2429457 TOOTH,TXCB10 CORBAR 50 0.25 14.75 6.69 2500 737.50 334.52
2429471 BLOCK,TXH10 CORBAR 25 0.21 6.60 2.99 1250 330.00 149.69
2429933 TOOTH,U7L/CU7L CORBAR 50 0.57 29.50 13.38 2500 1475.00 669.05
HEX TEETH SEE NOTE BELOW HEX
Notes:
1) Full pallet of teeth contains 50 buckets
2) All these teeth require roll pin 2443223 except 2429933
3) Hex teeth (PN’s A000378, A000388, & A000390) are sold individually.
RETURN TO TABLE OF CONTENTS
TE
ET
H &
BLO
CK
S
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 73
Bucket Style Teeth
PART NO. CODE NO. DESCRIPTION APPLICATION
65340659 Tooth, standard, X156 Used for general conditions.
65340660 Tooth, tiger, T156 Used for hard penetration such as frost or semi-hard soils.
65342161TU Nose, weld on, 2" Use w/ 65340659 & 65340660 Teeth. Welded with 7018 or 8018 low-hydrogen rod.
PART NO. DESCRIPTION STYLE PER
BUCKET LBS
EACH LBS /
BUCKET KGS /
BUCKET PCS/
PALLET LBS /
PALLET KGS /
PALLET
65340659 TOOTH,AUG,STD,X156 Bucket 15 1.35 20.75 9.41 750 1037.50 470.60
65340660 TOOTH,AUG,TIGER,T156 Bucket 15 1.95 27.80 9.43 750 1390.00 630.49
65342161TU NOSE,WELD ON, 2" Bucket 20 1.85 45.95 20.84 1000 2297.50 1042.13
Note: All these teeth require roll pin 13347TU
RETURN TO TABLE OF CONTENTS
TE
ET
H &
BLO
CK
S
ph: 1.800.447.2781 fax: 903.957.0015 (Sherman, TX) email: [email protected]
605.882.5595 (Watertown, SD) Effective Date: March 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
# 74
PART NO. CODE NO.
DESCRIPTION APPLICATION
A001388 DS,K150 Puller, DS, K150,Black For removing C4 series step shank teeth with collars and DS teeth.
29937 C123HP,C10 Puller, C123HP, C10,Green For C10 series (.765 shank) bullet teeth.
2429952 C20HP Puller, C20HP,Black For C20 series (.735 shank) bullet teeth.
2429953 C30HP Puller, C30HP,Blue For C30 & C87 series (.99 shank) bullet teeth.
A000127 KHP2 Hammer punch, KHP2
For removal of most bullet series teeth. Hardened tip provides long life. Used in conjunction with a hammer.
A000355 KAHP1 Air hammer punch, KAHP1
For removal of most bullet series teeth. Hardened tip provides long life. Fits all light-duty air-hammer guns with a .395” chuck.
65343293TU Hammer punch,1/2” For removal of conical tools from blocks. Use with TC10 & TC20 teeth.
65343294TU Hammer punch,3/4” For removal of conical tools from blocks. Use with TC4, TC30, & TC87 Teeth.
A000752 KRP1 Pliers, KRP1, w/replaceable tips
For removal of snap ring, C4.
A000186 Replaceable tips For KRP1 pliers.
A000137 KRP4 Pliers, KRP4, non-replaceable tips
For removal of snap ring, C4.
Tooth Removal/Installation Tools
RETURN TO TABLE OF CONTENTS
TE
ET
H &
BLO
CK
S
www.terexutilities.com | www.terexhypower.com | www.terexaugertools.com
Effective Date: September 2011. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposed only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2011 Terex Corporation.
Terex Utilities
PO BOX 1150
Watertown, SD 57201
Toll Free: 1.800.447.2781 - Augers & Tools
Email: [email protected]
Toll Free: 1.800.982.8975 - Units
Email: [email protected]
75