TENDER OF MEDICAL EQUIPMENT TO SYRIA, REF. …€¦ · Web viewShould be compatible with multiple brands of Syringes available in market.• Disposable Syringes in nominal sizes of

TENDER OF MEDICAL EQUIPMENT TO SYRIA, REF. NO 3045, DECEMBER 2019

TENDER OF MEDICAL EQUIPMENT TO SYRIA, REF. NO 3045, DECEMBER 2019

BACKGROUND

Islamic Relief is an international aid and development charity, which aims to alleviate the suffering of the world's poorest people. It is an independent Non-Governmental Organization (NGO) founded in the UK in 1984.

As well as responding to disasters and emergencies, Islamic Relief promotes sustainable economic and social development by working with local communities - regardless of race, religion or gender.

Our vision:

Inspired by our Islamic faith and guided by our values, we envisage a caring world where communities are empowered, social obligations are fulfilled and people respond as one to the suffering of others.

Our mission:

Exemplifying our Islamic values, we will mobilize resources, build partnerships, and develop local capacity, as we work to:

Enable communities to mitigate the effect of disasters, prepare for their occurrence and respond by providing relief, protection and recovery.

Promote integrated development and environmental custodianship with a focus on sustainable livelihoods.

Support the marginalized and vulnerable to voice their needs and address root causes of poverty.

We allocate these resources regardless of race, political affiliation, gender or belief, and without expecting anything in return.

At the international level, Islamic Relief Worldwide (IRW) has consultative status with the UN Economic and Social Council and is a signatory to the International Red Cross and Red Crescent Code of Conduct. IRW is committed to the Millennium Development Goals (MDGs) through raising awareness of the issues that affect poor communities and through its work on the ground. Islamic Relief are one of only 13 charities that have fulfilled the criteria and have become members of the Disasters Emergency Committee (www.dec.org.uk).

IRW endeavours to work closely with local communities, focusing on capacity-building and empowerment to help them achieve development without dependency.

Please see our website for more information www.islamic-relief.org.

http://www.islamic-relief.org/

http://www.dec.org.uk/

INTRODUCTION

Islamic Relief in Turkey are based in Istanbul from where we conduct most of our Syrian operations and where we will provide support and aid to the Syrian people inside Syria.

Islamic Relief is sending more and more life-saving aid supplies to Syria in response to the country’s escalating conflict and mounting numbers of casualties. We are now going to supply medical items for IDP’s in Syria.

The primary objective of this emergency intervention is to enhance capacity to provide immediate lifesaving assistance and ensure an efficient resource mobilization to support IDPs living in IDP sites.

The expected outcomes of this project is to support the newly internally displaced people living in camps and IDP sites with highly needed medical supplies to help alleviate suffering and to increase their access to humanitarian response, especially for those with specific needs.

This emergency humanitarian aid is to be performed as a cross-border operation from Turkey and the neighbouring countries to Syria or if possible through local supplies, enabling IDPs to sustain their lives with dignity.

These medical supplies aid is part of a major Islamic Relief seasonal and emergency programme that has now provided millions of pound worth of assistance to the people of Syria. Food, non-food, shelter, medicines and medical devices have been delivered deep inside Syria in recent months, and people in dire need have now been able to gain steady access to lifesaving services. People in need of humanitarian aid have now received assistance, food, shelter, clean water and other services. In order, for our office in Turkey to continue the assistance to the conflict affected civilians and vulnerable communities in Syria, a necessity of medical items are now required.

TENDER REQUIREMENTS

In order, for our office in Turkey to continue the assistance to the conflict affected civilians and vulnerable communities in Syria, a necessity of medical supplies are required. These are listed below in detail. All supplies are required to be delivered at the locations specified beneath according to the need in the accessible areas of northern Syria as a “just in time” exercise and as a matter of great urgency.

DELIVERY DETAILS

Case Delivery Destination Comment

Supplier must have export permission or be able to supply locally from Syria

Delivered Duty Paid (DDP/DAP) to defined destinations inside Syria, e.g. Bab Al Hawa

Prices should exclude TAX.

BILL OF QUANTITIES

Notes: Please attach any related catalogues, specifications or certificates and insert the type in the following table.

More than one manufacturer, brand and price can be inserted for the same item. Please use our table when filling the prices. If you do not have the item just keep it empty. Your offer should be for the quantity that we request, not less and not more.

Please only use EURO (€) as the currency for your offers as per the guidelines.

S. No.

Name Specifications QTYUnit Price Euro (€)

Total Price Euro (€)

1 Heart lung machine with Heater Cooler

Unit/Temperature control

Module(TCM) (1)

Heart lung machine• 4 pumps which can run individually• Each individual roller pump should be capable of running on 24volts supply with a transformer in the console.• Twin pump module should have selectable ratio of Blood & Cardioplegia from 1:1 to 1:20.• Console should be compatible to integrate a centrifugal pump module.• Air- Oxygen Blender with hoses and Flow meter should be provided.• The unit should be supplied with a Battery backup for all the pumps, all safety systems and accessories for a minimum of 90 minutes.• Standard safety features as Bubble sensor, level sensor and pressure sensors should be present .Level and bubble detector should be supplied with the unit.• Internal Pulsatile should be integrated with the system as a safety feature and it must have optional facility for External Pulsatile.• The unit should have following monitors: Pressure Monitor (for 04 pressure displays), Time Monitor (03 resettable timers with 01 real time display), Temperature monitor (04 temperature displays), Cardioplegia Delivery (total volume, actual volume, time and pressure display), Temperature controller for Heater cooler unit.• Air- Oxygen Blender with hoses and Flow meter should be provided.• To work with power supply of 220-240V / 50-60Hz.• In case of any error, error message should be displayed by name along with audible alarm.• Should have flexible LED Lamp.• Interchangeable functions in at least 2 pumps• A flat screen display provides graphical and functional status information at a glance; all supervisory and warning functions are on one panel.• Built-in remote control for the Heater- Cooler Unit• Self-test at power-upHeater Cooler unit (HCU) /Temperature control module(TCM)• should have two main patient circuits (for blood heat exchanger and/ or blankets) with the same temperature & one independent cardioplegia circuit.• Should have built in ice Maker to provide 15 kg of ice in about 4 hours from 20º

1

S. No.



C water.• To work with power supply of 220-240V /50-60Hz.• Should have temperature display range of1- 40.5*Celsius; remote accuracy of ± 0.3 *Celsius.• Water outlet temperature of heat exchanger and blanket range 3-40.5 *C• One adult and one paediatric reusable blankets should be provided.• Microprocessor based unit to control, cool, re warm and maintain temperature.• Should have split tank and automatically controlled mixing valve for fast and accurate temperature adjustment• Flexible, removable Control Unit (CU) with colour touch LCD with LED backlight for excellent visibility• Effective water decontamination by an integrated UV lamp• Hansen-quick couplings coded with pictographs for fast and clear connection of oxygenator and cardioplegia heat exchangers• Heart lung machine should be horizontal not vertical UPS Online system

2 Doppler Ultrasound

machine

Ultrasound device (Echo) : 1- power supply 220 v , 50 hz.2-proveded with LCD screen 14 inch at least. yes 19 " LED monitor 3-colour Doppler system.4-trolly built in .5-proveded with three connection for probes at less. 4 prop connection 6-proveded with 4 probes - Convex probe 3.5 MHz , multi frequency. 3.5Mhz convex probe D3C60L - linear probe 7.5 MHz , multi frequency. 7.5 Mhz linear probe D7L40L - Phased array probe for adult 2 MHz , Multi frequency. 3.0 Mhz phased array probe D3P64L (For adult) -Phased array probe for pediatric 5 MHz , Multi frequency . 6.0 Mhz phased array probe D6P64L（for pediatric） 7-proveded with PW,CW Yes. 8-Proveded with all program for cardiology and genecology and abdominal 9-proveded with echo black \ white printer . YES

1

S. No.



10-proveded with castors with breaks. 11-proveded with all switches for STC - TGC - ZOOM -COMMENT 12-proveded with suitable UPS , on line system

3 9 Parameter monitor with 2 slave monitors

(2)

The monitor should be modular in nature with possibility of future upgradation through plug& play modules which can be used in Operation Theatres, Emergency Departments, ICU’s and wards At least 26 inch Color TFT LCD/LED display. High Screen resolution. Modular slots available with measurement of up to 9 parameters : 12 lead ECG with arrythmia analysis, SpO2, Respiratory rate, EtCO2, three invasive pressure monitoring, BIS, NIBP, two temperature probes. Device should be light-weight and portable. Touch screen facility. Short-cut keys should be provided for ease of operation. Suitable for adult, paediatric and neo-natal applications. Audio and Visual Alarms. Alarm settings can be changed for different parameters. Three different levels of alarms: High, Medium and Low Priority. Should have user selectable values for each level of alarm. Lithium Ion Battery with battery status indicators and 4 hours continuous monitoring back up. Extensive data storage capabilities:o >100 Hours of trend data storage capabilities. Monitor can detect arrhythmias, with storing and reviewing facility. 5 lead ECG cable provided with different modes of monitoring for ECG: Surgery, Monitor and Diagnostic modes of operation. Multi-channel ST segment analysis. Advanced Masimo Technology available which monitors SpO2 values during motion as well with different levels of sensitivities depending on thetype of patient monitored. NiBP cuffs available for adult, paediatric and neonate patients, and wide measuring range and mode of measuring: Oscillometric

4

S. No.



. Pulse rate measurement with accuracy of +/- 3 bpm

. Touch screen

. At least 45 minutes battery back up

. Two slave TFT monitors of 26 inch size

. WAN communication compatible4 Operation

theatre table (1)• Functions of the table through electro- hydraulic adjustable via wire controller: height adjustment, Lateral tilts, Trendelenburg , Back Plate adjusting ,“0” position one-button activated• Base cover made of rugged glass fibre reinforced laminate, resistant to impact, breakage and disinfectants, with additional scratch-proof finish• The table top should be fully free without transverse shadows on the X- ray images.• Guide rails for X-Ray cassette should be provided under the table top.• Operating elements: should be with backlit cable-connected hand control on head end of table with override panel on Column.• Override panel should have a safety feature with dual touch operations.• Locking via foot pedal.• Battery back up of at least 3 hours• Technical specifications should be:a) Total length min: 2140 mm +/-10%b) Total width min: 540 mm +/-10%c) Table-top height adjustment in range min: 600 - 950 mmd) Motorized Back rest adjustment min: + 70°/-40°e) Head rest adjustment min: + 47°/ - 61°f) Both sides lateral tilt adjustment min: +/- 15°g) Trendelenburg/Rev- Trendelenburg position adjustment, +/- 25°h) Manual Leg rest adjustment min: 0 /- 95°i) Leg rests with possibility of abduction by min 180° - to be locked using clamps j) Maximum patient weight: 360 Kgs• Six section Table-top consists of following sections:• head rest• back rest divided, into lower back plate and seat plateExtension Plate

1

S. No.



• Head rest and leg rest should be interchangeable (Normal and Reverse patient positioning).• Preferably Should be ISO, CE and ULcertified.• Standard accessories should be:i) Head Rest, with at least 80 mm SFC padding: 1 Noii) Leg Plates, pair and abductable, 80 mm SFC padding: 1 Noiii) Arm board (pair)incl. fastening clamp, adjustable via ball-and-socket joint: 2 Nos.iv) Anesthesia Screen with Clamp: 1 No v) Backlighted hand control 1 Novi) Abdominal strap: 1 Novii) Adaptors for headrest: 2 Nos.• Accessories for Cardiac and general surgeries should be:i) Lateral arm support with clamp: 1 No ii) Leg Support with clamp: 1 Noiii) Clamp for attaching side supports 2Nos.iv) Lateral support 1 No v) Back support 1 No• 45 minutes battery back up

5Suction machine

(1)

• Vacuum adjustment with loss of additional air• Operation of pump should be electronic and microprocessor based• The signal from suction should be acoustic and optic• It should have automatic standby (sleep after 20 seconds of non use) and awake after detection of vacuum• Air flow of 36litre/minute• Vacuum of -90Kpa• Should have digital numerical display• Should have 2 jars of at least 2 litre• Preferably controllable through foot switch• Voiceless• High pressure

10

6Electro cautery

unit (1)

• Integrated touch screen• Two users can use it simultaneously• Should provide monopolar output for cut, coagulation (fulguration & spray) & blend• Should have bipolar cut and coagulation in multiple levels with automatic

1

S. No.



bipolar coagulation.• Activation by foot switch and hand switch for all the modes• Auto diagnosis on switching on and during working to continuously monitor all parameters• Should be usable with laparoscopic monopolar and bipolar instruments, for which programmes and accessories must be available.• System for neutral plate safety by continuous monitoring of contact quality and connection• System for monitoring and control of leakage current• Frequency Leakage on the patient should be less than 10 micro Amp.• tip cleaner, minimum 50 nos• Suitable UPS with 30 min backup

S. No.



7 Defibrillator (1)

• Digital display• Internal and external paddles• Discharge switch over hand paddles• Internal and external paddles should be Compatible with paediatric and adult use• Should use Bi Phasic waveform for shock delivery to ensure that the current is optimal and damage to heart tissues is minimal• Preferably Should have LCD display• Should have a facility for charging via paddles• Should have energy selection from 2 – 300Joule• Should Have inbuilt Battery capable to delivered 100 charges/Discharges of 300 J with full charged condition• Should have sealed lead acid battery• Charging time to 300 Joule should be as low as 10 second or better• Should be able to synchronize to R wave• Should have at least 24 event recording• Should have both Audio Visual alarm• Should have a facility to monitor ECG via both Paddle and ECG cable• Should have Marker indication on ECG wave• Should be supplied with Adult and swipe to expose Pediatric paddles• Should have inbuilt thermal printer• Should have input protection against High voltage• Should have Electro Surgical unit filter• Standard Accessories:3 Lead Patient Cable – 1 noPower Cable – 1 noECG Gel – 10 noDisposable ECG electrode – 20 PacketUser Manual – 1no

2

8OT Light with

recording

• Ceiling Mounting 3 dome LED light• 2 dome with 1.6 lakh lux and one dome with .4- 1.2 lakh lux• Shadowless light• Sterilizable Handle

2

S. No.



• Light Source : >40,000 Hrs• Controls : Control Panel (wall and on dome)• There should be a provision to mount the camera in one dome.• Battery back up of at least 45 minutes• Integrated In-Light Camera System at one of the domes. Latest Wi- Fi HD Camera, which should be mounted on one of the Light dome Camera should have autofocus , Optical Zoom : 10X. Digital Zoom : 12-15. Video Output : HD, S-Video & Composite Video. White Balance & Gain : Automatic/Manual. (DVI/HDTV), RGBHV (High Resolution), SVHS (S- Video), Composite video signals to travel from the various sources of video like endoscopic camera, room camera, in light camera, high definition flat panel monitors, while assuring native resolution / signal. Dome. • Sensor-1/4" Cmos • Signal System- 702p • Picture Element- 14,30,000 • Aspectratio: 16:9 • S/N ratio- > 50dB • Lens(zoom)- 12x • Focal length- 1.6 to 2.5 • Aperture- F1.8 to F2.1 • Ant flicker- Yes • Sensitivity( lx)- 1,2 (F1.6, 50IRE)• White Balance- Auto/manual• Sterilizable handle on all domes• Preferably Should be compliant with relevant European CE /US FDA standards

9 Anaesthesia work station with inbuilt ventilator

General• Should have provision for delivery of Oxygen, Nitrous oxide and medical Air with pressure gauges.• The machine should be capable of delivering Low flow and Minimal flow anesthesia.• The anesthesia machine with circle absorber, Ventilator and Vaporiser should be CE and US FDA approved.• Manufacturer should have authorised local service availability in Aligarh. The details of the same has to be provided separately.• Should have independent attachments for connecting central gas supply and pin indexed cylinders.• Anesthesia machine frame shall be manufactured in strong but lightweight material. Aluminium or composite material is preferential over steel frame construction.

1

S. No.



• The machine shall have a maximum of four castors/wheels for manoeuvrability. These must be of a sturdy/robust design.• The ability to individually lock the brake mechanisms of the front two castors is mandatory.• The machine shall have a traditional layout with obvious major components eg. Anesthesia Delivery, Circle absorber, Vaporiser and Ventilator.• The frame shall have GCX compatible channels incorporated within the design of the machine.• The option for an integrated independent Oxygen flow meter for Oxygen delivery is mandatory.• Pipeline, cylinder and Airway pressures should all be displayed on analogue gauges and be visible at all times during operation.• Frame shall accommodate up to two backup cylinders one each for Oxygen and Nitrous Oxide• On activation of the system on/off switch gas flow and vaporization shall immediately be available•In the event of complete power loss and battery failure it shall still be possible to manually ventilate and deliver anaesthetic agent.•The common gas outlet shall be easily accessible in the event of an emergency and for use of alternate breathing circuits•The option for illumination of the writing table/work surface is mandatory•The frame should have integrated power outlets to supply a minimum of Four external devices•Should have Top shelf ,Manoeuvring handle and foot rest•Machine should have sufficient table top work space.•The unit should have a battery back-up facility for the ventilator in the event of power loss. Minimum 60 minutes battery backup required.• Input Power : 200 – 240 VAC

Gas Flow•Antistatic and Cascaded dual flow tubes should be available for all gases to allow suitable resolution and accurate control at low total fresh gas flows.• The flow range shall be 50ml-10 lpm

S. No.



•Should have N2O cut off facility if O2 supply fails.• Should have Oxygen failure alarm both Visual and Audible.•Should have Oxygen Flush facility bypassing Vaporiser. O2 flush switch should be conveniently placed for easy accessibility. O2 flush switch should non lockable.•The unit shall have a mechanical anti- hypoxic device system to control the ratio of Oxygen and Nitrous oxide. A completely mechanical system that requires no electricity is mandatory•The mechanical anti-hypoxic system must limit minimum Oxygen levels to approximately 30%•Should have minimum mandatory Oxygen flow of 50 ml when switched on•It shall be possible to deliver Air with only basal flow oxygen independent of the abovementioned hypoxic control.•Gas flow shall be controlled mechanically only• Visual display of individual gas flows is mandatory, this shall be by physical eans such as glass flowmeters independent of electrical power•The option for electronic flow displays for all gases in addition to individual physical flow display is desirable (optional); price should be quoted seperately•Flow meters should have the option of backlight illuminationVaporizers•The unit should accommodate at least two vaporizers for Anesthetic agent delivery.(isoflurane-sevoflurane)•The manifold should only accept Vaporizers with approved Back bar connections and prevent usage of more than one vaporizer simultaneously. Preferably selectatec compatible back bar.•Vaporizers supplied with the unit shall be routine maintenance free for the life of the product•Vaporizers supplied with the unit shall be manufactured from lightweight materials to aid in fitting & removal

Ventilator•Ventilator shall cater for a diverse range of patient groups from neonates to patients with restrictive airways

S. No.



•Ventilator should be Pneumatically driven and controlled electronically•Ventilator shall have a large colour TFT touch screen display, for exclusive use of ventilator control and monitoring.•Ventilator display shall be mounted on adjustable side arm making it possible to view from various angle•Control of the ventilator user interface shall be by touch screen and rotary dial•Ventilator shall have the following ventilation abilities, volume control (VCV), Pressure ventilation with decelerating flow pressure control(PCV), SIMV &PSV•Assisted modes of breathing shall be flow triggered.•On power up, in the case of an emergency mechanical ventilation shall be available without the need to carry out user or machine self-checks•Ventilator should have a leak and compliance test that can be done independently of a full system check and should complete in less than 1 minute.Ventilator shall compensate for fresh gas flow and compliance of the entire circuit. There should be provision to disable Fresh Gas Compensation.•Ventilator shall compensate automatically for changes in ambient pressure in the atmosphere•The ventilator shall have the option to improve delivered output accuracy by compensating for fresh gas mix (O2 & AIR / O2 & N2O) and Oxygen concentration in fresh gas•Ventilator should have the ability to set and store a hospital default as well as preferences for Adult & Paediatric settings•Should have user adjustable alarms for major parameters•Apnea alarms must be user adjustable to allow for all operating conditions and phases during Anesthesia•Ventilator should have the ability to display Patient Spirometery loops. These include Flow-Volume and Pressure Volume curves.•Ventilator should also display waveforms for flow and airway pressure with freezing facility• The user should be able to select & display 2 waveforms on screen•Ventilator shall display a dynamic compliance measurement•Volume measurement shall be by separate flow sensors for inspiratory &

S. No.



expiratory breathing paths•The volume measurement flow sensors/transducers shall be housed completely within the breathing system absorber & not remoted via tubes or channels

Ventilator ParametersTidal Volume - 20ml-1600 mlFrequency - 4-100 bpmI:E Ratio - 1:0.2 to 1:8Inspiratory Pause - 0-60% of TiPEEP - OFF, 4-20 cmH2OPressure Limit - 5-70 mH2OMinute Volume - 0.5 to 50 l pmInspiratory Flow - 2-70 l pm

Breathing System• The breathing system designed so that it can be removed & replaced as a complete unit without the use of toolspreferably with front facing inspiratory and Expiratory gas outlets• All parts of the breathing system that are in contact with patient gas shall be latex free and Autoclavable except for non autoclavable removable part like O2 sensor and Pressure manometer.• Bag/Vent switch shall be integrated on the absorber and should activate ventilator in vent mode and vice versa (One step operation).• Breathing system should have heater system to avoid water condensation.• Should have quick release canister for sodalime , capacity minimum 1 litre• The breathing system absorber canisters shall have a bypass system to allow for canister change mid-case without loss of ventilation pressure. The requirement for an automatic bypass without extra input from the user is mandatory• The ventilator bellows shall be clearly visible and be of upright design. The bellows should ascend on expiration to provide a quick visual indicator for system leaks.• The fresh gas hose shall have a method of locking/securing its connection

S. No.



system to the CGO• Should have provision for FiO2 monitoring cell and FiO2 value should be monitored on the main screen.• A bag arm with height and positional adjustment shall be available as standard

Machine should be supplied with following accessories• High pressure hoses for O2, N2O andAIR• Reusable Adult& paediatric patient circuit – 1 each• Disposable adult circuit – 10 No• 2 Litre Breathing bags – 2 nos• Power cord• User manual• Galvanic Type FiO2 Cell • Vaporisers ( Sevoflurane& Isoflurane ) Extra Halothane vaporizer

10ACT (activated clotting time )

machine (1)

• Simultaneous two samples can be testedkaolin activator for uniform mixing with blood sample• 2 point accurate clot detection facility• Easy to use with one button operation System• Data transfer and print option• Room temperature storagevoltage: 220-240 V, 50 Hz Single ~ Phase• Must be compact, small & portable• Preferably with clot analyser facility

1

11 Integrated Single hand piece

Sternal saw with oscillating saw

(2)

Hand piece• Hand held Battery operated• 2 speed control modes(standard and fast) with Safe mode option on hand piece• Light weight pistol grip• Straight and oscillating saw should be mountable on same hand piece• Autoclavable• Microprocessor controlled hand piece, can be calibrated for consistent

1

S. No.



performance• Can be fitted with aseptic battery kit• Tool less mounting of accessories

Battery charger• 220-240V charger and should have the feature to count the charging cycles for a particular battery• Should have capability to identify worn out battery• Should have capability to charge 4 batteries at a time with no module requirement• Should have an indicator to provide battery status for chargingBattery• Ni-Mh and Ni-Cd with low internal impedance to deleiver higher current than other battery types• Ni-Mh and Ni-Cd cells with capacity to produce more torque and non autoclavable and autoclavable optionswith average life of approximately 200charging cycles• Should have a minimum run time of 15 minutes• Should be autoclavable

Accessories and sterilization case• Sternal blade guard• Should accommodate all hand piece attachments and accessories for autoclaveExtra battery is required

12 SINGLE SYRINGE PUMP

comfortable draping on patient 9.

Product Quality Standards:• Should be US FDA or CE (Notified body) approved model.• Manufacturer should be ISO 9001 & ISO 13485 certified for quality standards.• Shall comply to ISO/IEC 60601-1-2, Electro Magnetic Compatibility (EMC

20

S. No.



Standard): The pump confirms to EU Standard on electromagnetic compatibility and hence not effected by electromagnetic field from external sources and do not emit electromagnetic waves to affect other electronic devices.• Should have Ingression Protection of level IPX1 or above.

Technical Specification:• A handle for easy and convenient carrying.• Should have the provision of status indicator on the control panel.• The slope of the panel face has been increased so that the reading and indicator light can be easily checked from a distance.• Should have warning light alerts for the operator for low battery, low volume, occlusion and internal malfunctioning.• Connects to external DC power source, enabling use of the pump in anambulance.• Should be compatible with multiple brands of Syringes available in market.• Disposable Syringes in nominal sizes of 10 cc, 20 cc, 30 cc & 50 cc/60 cc should be used.• Maximum flow rate 0.1 ml/hr to 1,500 ml/h with steps of 0.1 ml/hr.• Accuracy of ±2% or better.• Check by indicator lights that the setting is right.• Should have 2 hour battery back up with 24 hours charging in case of power failure.• Automatically switches over to battery with alarm, if plug is accidentallypulled or there is a power failure.• Should have 3 level battery indicator displaying the status of the battery. • Bolus function for primary and when bolus injection is called for. To prevent in-correct operation the bolus function should be designed to work only when the ml key and bolus key are pressed at the same time.• Bolus rate should be programmable to approx 500 ml, with infused volume display.• Selectable occlusion pressure trigger levels selectable from 300, 500 and 900 mmHg.

S. No.



• Continuously Monitors Plunger: A plunger detection sensor checks that the plunger is set properly and an internal mechanism continuously monitors plunger movement during infusion.• Should have occlusion detecting pressure alarm for detecting occlusion and setting off the occlusion alarm.• Facility to know the exact amount of infusion taken place any time.• Retains flow rate and total infusion volume settings - When the power is turned off, the unit stores and retains current flow rate and total infusion volume settings for the next use.Power supply:• Power input to be 220 – 240V AC, 50Hz fitted with Indian plug of appropriate rating.Warranty: Should have 3yrs. of manufacturer warranty.

13 Headlight

More than 2.5 lakh lux (preferably)• LED/Xenon light• Homogenous illumination across a broad range• Bulb warranty of more than 1000 hrs(atleast)• Buttons for adjusting brightness should be available• Should have light weight head band with optical basket time• Simple 2-point adjustment for comfortable fit for all heads sizes• Atleast 30' power cord to increasefreedom from clutter of floor stands andfiber optic cables• Battery backup of atleast 30 mins without interference in light intensity.• FDA approved

2

14 Dual chamber External

pacemaker

Should be capable of pacing in demand or asynchronous mode.• Should be capable of pacing at rates of30-180 ppm that is user selectable.• Should also have the capability of performing high rate pacing up to450ppm.• Should have the capability to deliver

2

S. No.



0.120ma output which should be user selectable with 1.5/2 ms pulse width.• The pacemaker sensitivity should be user selectable from 0.5- 20 mv.• Should use easily available standard 9- volt alkaline battery.• Should indicate pacing, sensing and battery status.• Should be protected against defibrillator shocks.• Should continue to function for at least15 seconds during battery change.• Lightweight and small.• Controls with easily visible transparent protection cover.• Patient extension cable with 3 patient bipolar endocardial leads.

15 IABP (intra aortic balloon

pump )

. Transportable, Compact IABP system with minimum 3 Hours of Battery Backup..Fast Pneumatics to provide accurate & reliable ventricular support enhancing augmentation & improved after-load reduction. Preferably a compressor based system for better drive-gas shuttle speed..System should automatically re- calibrate fiber optic sensor in vivo every two hours..Fiber optic pressure signal out-put should be available for external monitor to eliminate need for additional pressure monitoring site & transducer..Should have 3 modes of Operation, 1) Automatic 2) Semi Automatic 3) Manual..System should be capable of automatically selecting appropriate Trigger ie. ECG or Pressure and also accurately select the Inflation and Deflation points, in Automatic mode..In Automatic mode of Operation, user should be in control of the deflation pointIn Automatic and Semiautomatic Mode, Single ECG Trigger should be able to track various Ventricular and Atrial Arrythmia including VE’s, Bigeminy, Trigeminy, Couplets etc and Atrial Fibrillation, without any user intervention, and still give optimal performance..In Automatic and Semiautomatic Mode, Advance Software should automatically adapt the timings for various rhythms and rate variations, without any user intervention.In Automatic and Semiautomatic Mode, it should automatically identify Atrial Fibrillation & adopt R-Wave deflation mode for better patient support, without

1

S. No.



any user intervention.Should be able to trigger on 7mmhg of Pulse Pressure when used in Pressure Trigger mode.Single Key Start-up to make it fast, user friendly and easy to use.Should be able to display at least 3 waveform as ECG, Invasive Pressure and Balloon Pressure waveform. Large Detachable Display for brighter &very good visibility from a distance in any lighting conditions.On screen indication for Helium level in the cylinder & Battery level for timely intervention and correction.ECG Inflation marker to indicate inflation period on ECG which can be useful when arterial pressure waveform is not available.On screen indication of standby time and should give alarm after 20 mins, to draw user’s attention on the system being on standby..Optical Blood back detect for early indication of blood coming into the balloon lumen due to IABC leak.Should have extensive Help Text available during startup to make the system easy to use even for new users.Should give extensive Help messages to correct the alarm conditions that are specific to the alarm condition. This should help the user to overcome the alarm problems immediately and with ease..Should be capable of removing Condensation automatically without user intervention and should be maintenance free. Should have Peripheral Vascular Doppler for checking Limb Ischemia, which is tethered to the main equipment.Should have automatic Altitude correction to make it safer for use during Air Transport.PCIABP Software which allows the user to monitor the IABP from any remote location via a modem..In-built Comprehensive Service Diagnostics to help the technician to locate the fault immediately..Should have capability to connect on the hospital network.System should be supplied with the following:

S. No.



• ECG Cable with Leadwires: 1set• Reusable Invasive Blood PressureTransducer: 1 no.• IABP 40 fr :10 nos• Refillable Helium Cylinder compatible with the IABP system Qty: 2 Nos

16 Fluid warmer

Deliver blood and intravenous fluids at normothermic temperature at wide range of flow rates from gravity to 50-5000ml/hr• Keeps blood and fluids warm between37-42 C• Single step programming of warmer• Inbuilt reservoir for recirculating fluid• Easy interface• Audible and visible alarms• Built in over temperature test button and alarm test buttonInternal battery or ups online system

1

17 Blood Gas Analyzer

The analyzer should be able to measure Blood gas (pH, pO2, pCO2) and electrolytes( Na+, K+, Ca++, Cl-),lactate, Bicarbonate,glucose,Hb .• The analyzer should be capable to perform only pH with Electrolytes, separate consumable should be available to perform without using Blood gas for using the sameanalyzer as backup for Electrolytes.• Sampling: By automated probe aspiration.• The instrument should be operated with multiple disposable test cartridge / cassettes.• The cartridge / cassettes should have variable pack sizes from minimum of 25tests to 300tests. Option to use up to 1200 Tests/month• Consumables should have minimum60 days onboard life for smaller packs consumables25 tests to 300 tests.• The Cartridge / Cassette should have In-built Aspiration Probe and Peristaltic Pump• Analyzer should have minimum onboard test capacity of 25 test,50test,100test,200test,300testand to maximum600 tests

2

S. No.



• The system should be small and portable and easy to carry• Should be operational on power and on inbuilt battery• Analyzer should have automated entry and logging of consumables• Analyzer should have a start-up time should be 8~ 10minutes• Analyzer should have large touch screen facility and optional for key board operation• Analyzer should not use any Gas bottle/tanks / cylinders for calibrationAnalyzer should not use Maintainable electrodes / Micro Maintenance-Free Flow through Electrodes /conventional individual sensors /Foil pack reagents for Calibration and Measurement of parameters.• Analyzer should have onboard printer.• Analyzer should have data back-up facility option with USB ports• Analyzer should be able to measure all parameters with 60 ~75microL• Sample measurement time: max 60 seconds and sample to sample cycle time max120seconds• Analyzer should have integrated barcode reader and printer to support sample identification and result output.• The analyzer should perform samples like: whole blood and other fluids.• Analyzer should have on screen display of Levy-Jennings plot.• Analyzer should detect air-in sample• Analyzer should have USFDAcertified• Fully automatic, upgradeable, fast electrolyte.• Built in auto Quality control facility.• Suitable UPS with 30 min backup.• Stand by blood gas cum electrolyte analyzer in case of breakdown.

18 Autoclave Rapid Sterilizer

Removable stainless steel cassette, when inserted into the insulated steel receptacle, forms the sterilization chamber.• Should be utilizing a pressure pulse method of dynamic air removal and also designed with a much smaller sterilization chamber that allows for a faster turnaround time for smaller loads.• Should have ultrafast 9 minute unwrapped cycle and 17.5 minute wrapped cycle.• Should be single use water, exceptional instrument turnover, aseptic transfer of

2

S. No.



instruments directly to the point of use and reduced instrument investment.• Should have 15 minute Dri-Tec drying technology.• 125 liter capacity

19 Hydrogen Peroxide Sterilizer

Chamber Shape :Rectangular Prism

Chamber Material : AluminumTrays :2 (Stainless Steel / Aluminum)Door: Automatic Sliding Doors with Safety SensorsFoot-Operated Door Opening :YesPrinter: Yes (Process Parameters / Date / Time / Error Messages / Service Info)Data Storage :USB (Optional)Touchscreen : 7” (10.4” Optional) / Siemens / Weintek / KincoRF Plasma : 500 W (Optional)Electricity :3-Phase, 380 V, 50/60 Hz, Cable 5x4 mm2Room Requirements :10-40 oC, 20-75% RH, 60 cm from back, left, right sides; 100 cm from top

Sterilization Temperature : 45-50 oCSterilization Duration (min):Nolumen E: 18 (Optional) / Nolumen: 27 / Standard: 45 / Intense: 57Number of Cycles per Cartridge :Nolumen E: 6 / Nolumen: 6 / Standard: 4 / Intense: 3Number of Capsules / Cartridge :12, Independent

Chamber Ventilation : HEPA filter (Pore Size: 0.01 mm)Plasma Position : On the top of the ChamberWarming Time :~15 minutesElectronic Control : PLC / Siemens / Fatek / Kinco Remote Access Diagnostics : YesUser Access Levels : Operator / Supervisor / ServiceLogo Colorization :Yes (Blue, Red, Green) / Remote Process Monitoring in the CSSDVacuum Pumps / Gauges :Leybold (Germany) / Ulvac (Japan)Yes / Vacuum Pump ProtectionSterilization Agent :Hydrogen Peroxide (H2O2)

1

S. No.



H2O2 Concentration :59% (40% Optional)H2O2 Vapor Injection :6 Different Positions / Homogenous DiffusionBy-Products: Water and Oxygen

20CBC complete blood count

Speed:60t/h-2 operating modes: closed and/or open-Processed sample volume:2.4uL-22parameters:WBC RBC, Hgb, Hct, MCV,MCH, MCHC,RDW-sd/cv, Plt, MPV,PCT, PDW-sd/cv, P-LCR%, P-LCC, LYM, MID, GRA, LYM%, MID%,GRA%.- 3 histograms-Remote instrument management-Reagent consumption per test:Diluent:5.5mLSystem solution: 0.8mLLyse: 1mL-LCD touch screen, Size 10 inches-Connectivity: 2USB ports, Ethernet, LIS connection and results sent by email-Weight:9.7kgCompatible UBS is required

3

21 Biochemistry analyzer

Range of measurement : 0-3.5A all wavelenghts Wavelenghs:340,405,505,535,560,635,670nm(450 optional) Light Source : LEDs Settings:monochromatic and bichromatic

FLUUIDIC SYSTEM Continuous ow system with peristaltic pump incorporator stempper motor pump operation. CUVETTES Flow cuvettes of 18 ul Removel cuvette : Macro,semi-macro and micro or round Tubes with 12 mm

4

S. No.



PRINTER SCREEN AND KEYBOARD Thermic printer with easy paper changes incorporator PROGRAMMING Table of technique up to 150 technique Storage up to 2000 patients result quality control storage with levey- jenings charts and westgard''s rules. mesurement modes : reading absorbance, endpoint, kinetics differencial mode , fixed-time, rediomatric mode, and cut off.OPTINAL Battery pack Duration : 2 hr • Should be possible to use the machine with PC as well as without PC and have anoption to connect directly to a printer as well as take print from PC.• Should be approved by bodies like ATS, ERS, and follow the latest ATS/ERS guidelines.• Should be FDA/CE approved.• Should have a LCD display for displaying flow volume loop and test parameters.• Should be supplied with mobile color printer having capacity of printing 100 pages onbattery operation and direct connection facility to the spirometer.• Should be supplied with 50 no. of flow sensors and 1000 mouthpieces made ofpolypropylene or biodegradable material and nose clips 10 nos.• Should be supplied with necessary accessories for calibration if required.• Machine should be supplied with carry bag to accommodate spirometer, Printer andaccessories.• The weight of the machine should be approximately 1.5 KG• The dimensions of the spirometer should be approx. 24 X 26 X 7 cm

22 Electrolytes Analyzer

1. Analyzer should be able to measure sodium, potassium in serum and body fluids. 2. Should have a measuring method of ion selective electrode (ISE).

1

S. No.



3. Analyzer must be compact and all reagents should be in single pack. 4. Calibration should be automatic and user controlled. 5 .It should be able to measure all parameters with one single aspiration(Sample volume should not be more than 100 micro liter) 6. The reagent for cleaning and daily maintenance should be same. 7. The machine should have an inbuilt printer and upgradable facility for attaching to auto sampler and interfacing free of cost. 8. It should have alpha numeric display. 9. Software up gradation should be free of cost. 10. Should have storage memory of approx 100-150 samples. 11. Throughput of minimum 50 samples/hour. 12. Should be supplied with appropriate UPS with at least 60 min back up.(Range 60-90 mins) 13. Service Engineer should be locally based and available within 24 hrs. 14. Should have two year warranty followed by 5 years CMC, from the time of installation (2+5) 15. Should be approved from a Standard National/International certifying agency. 16. List of consumables and spares. 17. Buyback option should be there.

23Computed

radiography (CR)

1-power supply 220 v 50hz.

2-contain 3 parts: the scanner unit, laptop, sensitive cassette.

3-the scanner unit must be controlled by laptop and contain all switches to scan the sensitive cassette.

4-the system supplied with: cassette 18*24 with sensitive sheet quantity 2, cassette 35*43 with sensitive sheet quantity 2. 5-the processor of laptop should be QURE I5 at least.

6-the system should be supplied with copy of software for CR program. 7- The system can be able to connect dry printer in future.

2

24 Abdominal and 1- Power supply input: 220VAC, 50Hz. 8

S. No.



GYN Echo

2- 12” Display at least, black and white type. 3- Supplied with suitable trolley.4- Supplied with 2 Probes: convex probe 3.5 m hz, vaginal probe 7.5 mhz (all probe multi frequency).5- Imaging modes: M-Mode, B,B\B,B\M, 6- Gray scale: 256 at least.7- Measurements and calculations: Distance, Area, Circumference, volume, measurements.8- Frame rate: 18 F/S at least.9- Cine Memory of 40 frames at least, bidder should specify the capacity of the memory and the storage time for M-mode.10- The apparatus should be provided with a programme to calculate the age of the infant (PBD-AC-HC-FL-CRL-GS-LMP----), weight and the expected date of birth,

11- The apparatus has two transducer connections at least.12- The bidder should specify: a. Image processing methods. b. User Interface and Programmable Controls. c. Storage formats. d. Outputs13- Controlling possibilities: TGC, Freezing, and pan Zoom. Picture reversibility R\L. Power control .AGC (gain control).STC (Sensitive Time Control).Contrast, Brightness…And The bidder should specify these Specifications.14- Supplied with High accuracy Black and white printer, its specifications to be described.15- Supplied with compatible UPS enough for 1 hour at least.16- Any further specs should be described.

17-additional parts: paper roll for printer quantity 10 roll, echo gel 10 liter qty 5 pieces.18- spare part with devices : convex probe qty1 (1 probe with 6 devices)

25 ECG Device 3 channel

1- Number of channels: 3 at least.2- The bidder shall specify: a. Chart speed. b. Sensitivity.

6

S. No.



c. Common Mode Rejection Ratio (CMRR). d. Filters available. e. Max leakage current. f. Input impedance. g. defibrillation protection means. h. 1 mV calibration switch. i. Recording method and printed data.3- Supplied with suitable trolley.4- Additional following accessories: a. Gel tube: qty (5). b. Paper, roll: qty (15). d. Patient cable (Full) with chest electrode and limb electrodes: qt (1).5- Input Voltage: 100 to 240 VAC, 50Hz.6- Built-in internal battery, bidder shall explain the specification of battery.

26 500mA X-Ray device

specifications

Output Rating 40KW Line Nominal, Phase 100-240VAC 1ɸLine Voltage Range +/-10% 50/60HzkV Range 40-125KV, 1KV stepmA Range 10 – 500mATimer Range 0.001 to 10 sec ,38 stepsmAs Range 0.1 to 500mAsMax. Power Output 500mA 80Kv, 400mA 100kv, 320mA 125KvMinimum Breaker Rating 10AAnatomical Programs User Programmable and other programs with softwareTechnique Selection 4 Point display (Kv, mA, time, mAs)

Collimator:Field Shape RectangularMax. Field Size More than 43✕43cm (17✕17inch) at 100cm SIDInherent Filtration Min. 2.0mmAl eq.Luminosity Over 160LUX at 100cm SID (Typ. 250 LUX)Light Source Single LED

2

S. No.



Standard Laser line, Tape measure, Rotating flange

Patient Table:Movement Longitudinal 100cmTransversal 25cmLongitudinal 35cm

Tabletop Inherent Filtration 1.2mmAI at 100kVMax. Patient Weight 300kgSize 220cm X 75cm X 4.5cm

Bucky Type / Grid Oscilllating FD 34~44 inch, 103 lpi, ratio 10:1Fixed FD 100cm, 103lpi, ratio 10:1

Lock (Brake) EM Lock, Switch on/offCenter indication Buzzer sound and LED Transverse center, height centerDimension / Weight 2,200 (W) ✕ 750 (D) ✕ 660 (H) mm/150kg (330lbs)Vertical Wall stand:Cassette Stroke Vertical 1,640mm (420~2,060mm from floor to Bucky center)

Bucky Type / Grid Oscilllating FD 40~72 inch, 103lpi, ratio 10:1Fixed FD 150cm, 103lpi, ratio 10:1Lock (Brake) EM Lock, Switch on/offBalance Counter WeightDimension / Weight Max. 2,169 (H) ✕ 655 (W) ✕ 410 (D) mm/ 120kg (264lbs)

Floor Mounted Tube Stand:Tube Rotation Angle ±135°Tube Stroke Longitudinal Max. 2,200mm, Lateral 220mm, Vertical 1,580mm (440~2,020mm from floor to focus)Lock (Brake) EM Lock, Foot Switch on/offBalance Counter Weight

S. No.



Column Rotation 90° stepDimension / Weight 2,317 (H) ✕ 1,373 (D) ✕ 3,006 (W) mm / 240kg (529lbs)

Computer RadiographyStandard Components FCR PRIMA Tm (Model: CR-IR 392)Applicable Console CR Console, Console AdvanceMain Connectable Imagers DRYPIX PRIMA, DRYPIX 4000, DRYPIX 5000,DRYPIX 7000, DRYPIX Plus, DRYPIX SmartSupplies Imaging Plate ST-VI (standard type):35 × 43 cm (14” × 17”) , 35 × 35 cm (14” × 14”) , 10” × 12” ,8” × 10” , 24 × 30 cm, 18 × 24 cm, 15 × 30 cmHR-VI (high-resolution type):24 × 30 cm, 18 × 24 cm IP Cassette Type CC:35 × 43 cm (14” × 17”) , 35 × 35 cm (14” × 14”) , 10” × 12” ,8” × 10” , 24 × 30 cm, 18 × 24 cm, 15 × 30 cmType CH:24 × 30 cm, 18 × 24 cmType LC:35.4 × 124.5 cm, 35.4 × 101.7 cm, 35.4 × 83.0 cm,25.2 × 58.0 cm, 24.0 × 57.0 cmTime Required for IP Feed / Load Min. 49 sec.Processing Capacity Up to 73 IPs/hr.Reading Specification 10 pixels /mm, 5 pixels /mm, 20 pixels /mmTime to Start on Display Min. 33 sec.Time to Print on DRYPIX Smart Approx. 165 sec. (Approx. 155 sec.)*in case of 35 × 43 cm (14” × 17”)Number of Stacker 1Network 10 Base T/100 Base TXDimensions (W × D × H) 560 × 540 × 392 mm (22” × 21” × 15”)Weight 39 kg (86 lbs.)Power Supply Conditions Single phase 50-60 HzAC120-240V ±10% 1.9A (max)

S. No.



Environmental Conditions Operating Conditions:• Temperature: 15-30°C• Humidity: 15-80%RH (No dew condensation)• Atmospheric pressure: 750-1060hPa

27Baby Incubators

with radiation

1-power supply 220 v 50 hz.2- Supplied with trolley with four Antistatic castors and the front castors supplied with brakes.3-The trolley supplied with two drawers at least.4-TEMP control by air sensor (bidder should be explain the way of temperature control).5-humedity control (bidder should be explain the of humedity control).6-inclination of the neonate bed is adjusted. 7-contain all alarms (the bidder should be explain).8-supplied with iv pole.9- supplied with neonate bilirubin phototherapy unite. a- move on castors.b-contain lamps work on 220v 50hz (the bidder should be explain the specifications). c-contain timer .d-can adjusted the radiator level......

8

28 Full sets of instruments for cardiovascular

and thoracic surgery including

Octopus stabilizers

1. Fianchetto rib spreader(Large, medium and small sizes)--2 each2. Chest retractor( double bladed) small, medium & large sizes—2 each3. IMA retractor(large and medium)—2 each 4. Self retaining chest retractor for valve (medium, small)—2 each5. B.P. handle(no.3,4,7)—5 each6. Towel clip(medium size)—40 pc7. Curved artery forceps(size 3”,5”,7”)—20 pc each8. Straight artery forceps(size 3”,5”)—20 pc each9. Curved mosquito forceps—30 pc10. Sponge holder—10 pc11. TC Metzenbaum Dissecting scissors-curved(7”,9”)—5 each12. TC Mayo Dissecting Scissor, Curved, 7”,9” –5 each13. TC Valve cutting scissor 9”—3 pc14. Suture cutting scissors—10 pc

1

S. No.



15. Tube cutting scissors—10 pc16. Micro tip scissors—5 pc17. Utility Scissor, Black, 7 1/2"—6 pc18. Lengenbeck retractor—10 pc19. Cats paw retractor—10 pc20. Deavers retractor(large,medium, small )—5 pc each21. Doyen retractor—3 pc22. Allis tissue forceps(5”,6”,7”,9”)—15 pc each23. Russian forcep (7”,9”)—5 pc each24. Kocher forceps(5”,7”)—20 pc each25. DeBakey Tissue Forceps Straight,( 2mm- 6”7”,1mm-6”7”)—6 pc each26. Dissecting forceps straight toothed(6”,7”)—5 each27. Dissecting forceps straight non tooth (long jaw)—5 pc28. Adson Tissue Forceps 1x2 Teeth, 4 3/4"—10 pc 29. Volsellum(9”,10”)—5 each30. Duval Lung Forceps 1" Jaw, 8"—6 pc31. Right angle dissecting forceps( 7”,8”,9”)—3 each32. Fine tip right angle dissector(7”)—3 pc33. IVC passer—3 pc34. DeBakey Derra atraumatic side biting C-Clamp(small, Medium, large)—3 pc each35. cooley Derra Atraumatic side biting C- Clamp(small, Medium, large)—3 pc each36. aortic cross clamp curved(small, medium, large)—3 pc each37. TC wire cutter—5 pc38. Rib approximator—5 pc39. bone nibbler/rongaur( fine tip)—6 pc40. Frazier Suction Tube 8 French—10 pc41. Suction Tube Stainless Steel—6 pc42. Scapula retractor(medium size)—3 pc43. Lung retractor—3 pc44. Self retaining mastoid retractor (small, medium & large)—2 pc each45. Green Retractors Fenestrated, 8 1/2"—10 pc

S. No.



46. Hegar’s dilator set( sizes 6 to 20)—3 sets47. Snugger set—15 pc48. LA retractor curve(small, medium, large)—3 pc each49. VSD retractor—8 pc50. Eye-lid retractors—12 pc51. Suture organizers—10 pc52. Tubing/line organizer—6 pc 53. TC Crile-Wood Needle Holders, Serrated, 10" (TC=Tungsten Carbide)—10 pc54. TC Mayo Hegar Needle Holders, Serrated, 6"—10 pc55. TC Mayo-Hegar Needle Holders, Serrated, 8"—10 pc56. TC Pin Cutter Angled, Double Action, 8 1/2"—6 pc57. TC Ryder Micro Needle Holders, Serrated, 8"—10 pc58. TC Sternal Wire Twisters - 7"—10 pc

29 MICRO-SET 1. TC Lillehei-Pott’s Micro tip scissors curved (5”,7”,9”) (TC=Tungsten Carbide)—5 each2. TC Gerald micro-tip dissecting forcep, straight, serrated 7”—15 pc3. TC Potts-smiths Scissor Angled, (60° Angle, 125 degree reverse cutting) 7 1/4"—5 pc each4. Ring tip forceps 7”—15 pc5. Fine nerve hook—12 pc6. Fine metel suction cannula (10 french)—10 pc7. Liga clip applicators(yellow,blue)—5 pc each8. Coronary probe(1mm,1.25mm,1.5mm,1.75mm,2mm,2.25mm,2.50mm,2.75mm,3mm)—5 pc each9. TC(TC=Tungsten Carbide) Castroviejo needle holder, straight (5.5”,7”) for 5-0,6-0,7-0,8-0 needles—2 pc each10. Titanium coated Castroviejo needle holder, straight (5.5”,7”) for 5-0,6-0,7-0,8-0 needles---2 pc each11. Titanium coated spring pott’s scissors (forward 60 degree and reverse cutting)7”---3 pc each12. Fine curved bull-dog clamps for coronary with applicator—10 pc

1

S. No.



13. Malleable Coronary shunts (sizes 1.25,1.5,1.75,2.0,2.25,2.5,2.75,3.0)—5 sets14. Coronary snugger set—5 set15. Blower mister set—10 pc16. Silicone ¼” tubing for Octopus device—10 pc17. Octopus stabilizing device with Chest spreader for CABG—3 pc18. Star fish/Urchin heart positioning device—3 pc19. Aortic punch (size 3.5,4.0,4.5)—2 pc each

30 . Binocular Loupes: Qut ( 2 )

• Magnification: 4.0 - 4.5 x• Working Distance: 550 - 350 mm• Working Field Diameter: 80 - 50 mm• Pupil Distance: 47 - 74 mm

1

31Surgical Lights ,

Ceiling

Lamp type : LED .High intense beam with excellent shadow dilution and accurate colour rendering.Ceiling suspended and dual arm .spring balanced arm makes positioning extremely easy, providing a precise and stable beam.variable intensity .focusable beam .digital control panel .Light intensity (Ec) at least 160 000 lx .Colour temperature 4200º Kelvin .Adjustable light intensity Power Supply , 220V/50 Hz. This equipment shall be supplied with all necessary fixation gears to the building structure Accessories/Spares: Handles Sterilizable per unit (two) . Standards; CE; EC Marked US FDA; ISO certification

1

32 Clinical Centriguge

* LCD display, intelligent control, touchable and press button* Brushless motor: variable frequency

3

S. No.



* Stainless steel chamber* Mute mechatronics motor door lock* Special button for RCF control* Memory of last setting procedure* Can store 20 operation procedures* 10 levels speed-up and speed-down control

33 Digital Water Bat

hs

high-performance water baths are accurate, easy to use, safe and durable. The digital set / digital read P.I.D. temperature controller maximizes rapid heat-up without temperature overshoot. A microprocessor achieves precise temperature control regardless of how the unit is loaded. Calibration is performed directly from the front panel. Capacity: 10 Liter, Interior Dimensions WxDxH in. (cm): 13 x 14 x 6(32 x 36 x 15.25), Temperature Range: 5°C above ambient to 80°C, Temperature Uniformity: ±0.25°C at 37°C, 220V Power Requirement

3

34 Automatic ICU Ventilator 1- Patient range adult, pediatric.

2- Ventilation Modes: Dual type (Volume, pressure) and combined ventilation.3- Supplied with trolley with four Antistatic castors and the front castors supplied with brakes.4- Air supply: supplied with air compressor, and be able to connect to central gas system.5- Oxygen supply: Central medical gas system, and Low pressure oxygen through flowmeter: 15 L/min, 600kpa for low pressure.6- Ability to measure and to control the following parameters: (bidder should specify the rang of control of every parameter): - Frequency, FiO2, PEEP, I: E, - Tidal Volume, inspiratory flow, Inspiratory time, Inspiratory pressure. - Pressure limit, Pressure trigger, flow trigger, pressure support, - leak compensation.7- Supplied with humidifier with temperature range specified by the bidder and supplied with alarm in case of exceeding temperature limits.8- Supplied with Manual Breath.9- Ability to give 100% oxygen to the patient for two minutes at least.

4

S. No.



10- Supplied with high resolution screen, 8” at least. Bidder shall specify the parameters and alarms which display.11- Power supply input: 100 to 240 VAC, 50Hz. 12- Internal built in Battery with working time 3 hours at least. Bidder should specify power consumption. Or supplied with suitable UPS (on line). 13-addiotional accessory: disposable circuit qty10-oxygen sensor qty1-flow sensor qty1.

35 CENTRAL STATION MONITOR

Central Station Monitor of minimum 21” LED to be provided with one laser printer and one minimum 21” slave monitor. The cabling has to be done by supplier in the ICU. One CNS should be able to connect upto 30 monitors.2. The CNS should able to monitor over view facility and data transfer over the network along with web browsing facility to monitor each network monitor data through hospital LAN and through dial up facility from remote location. There should be two reference sites operational in India with web access feature.3. The quoted model should be US FDA approved.4. Monitor should have the facility to communicate bed to bed and bed to Central without having a wired network and the same shell provide the capability to control and interact with remotely-viewed parameters to maximize efficiency.5. Monitor when on the wired or wireless network shell be configurable to allow receiptof alarms from other networked monitor without having to configure remote monitors or central monitors to send alarms.6. Should able to monitor all the waveforms of connected patient monitors.7. Should single screen display of minimum 16 patient monitors with maximum of 32 in two monitor.8. Should have data storage & management of patient information of minimum 10,000patients with trend data.9. Monitor should provide the capability to enter patient demographic information at the bedside or central monitor. On – screen keyboard shall be present for entering this data.10. Monitor should permit the optional ability to receive and display information from ancillary patient monitoring devices such as ventilators, infusion pumps and

1

S. No.



other standalone devices. Interface connections to ancillary patient monitoring devices shall not occupy module housing slots designed for vital signs 11. Waveform zone display color must be user-configurable at any time to allow differentiation on patient waveforms.12. One real-time waveform should be visible on-screen while performing optional clinical calculations. All alarms shall remain active.13. CNS monitor shall support use of mouse, keyboard and barcode scanner when using remotely-accessed applications.14. Central monitor should have the full bed review of the beds selected.15. Should provide the required computer system of latest generation with suitable software & laser printer for printing patient information.

Power Supply:Should be supplied with Indian plug to run on 220V, 50Hz

Warranty: Should have 3yrs. of manufacturer warranty.

36 CRRT Machine SPECIFICATION

l. Treatment Mode | ) SCUP(Slow Continuous Ultrafiltration) 2) CVVH(ContinuousVeno- VenousHclmofiltration) 3) CWHD(ContinuousVeno-VenousHemodialysis) 4) CwHDF(Continuous Veno-Venous Hemodiafiltration) 5) HP(Hemopertusion) 2. Pump for Treatment l) Blood Pump 2) Dialysate Pump 3) Substituate Pump 4) Filtrate Pump 3. Safety I ) Electric shock protection - T)?e CF or Type BF 2) Battery backup l5min or Optional 4. Accumcy - Precise & stable gravimetric system or gravimetric balancing system 5. Flexibility l) Wide range of therapi€s 2) Cassette system and fihers 6. Easy Operation l) Color screen 2) Guided operation and integratod HELP function T.optimal|y designed to carry out highly eflicient therapies in the nephroJogical and intensive care environment B,Specifications l. Dimension and weight l) Height l50cm or l62cm 2) Width 46cm or 49cm 3) Depth 60cm4) weight 80ke or 60kg 2. Electrical Data l) Supply l0O/120/230/240V AC + l07q 50/60H2 or 100-240Y AC + 5!" 50l60Rz 2) Current cansumption max. 1.2 A(230V) or 2.5A(240V) 3. Electric Safety l) Type of protoction Safety class I against electric shock 2) DeCree of protection Type CF against electricc shock or Type BF 4. Flow

1

S. No.



rates (depending on treatment mode) l) Blood flow 0,l0 - 500m1/min +107o or l0 -450mVmin +l0olo 2) Substituatc flow 0,600 - 9600m1/hr, regulated or 100 - 8000m1'ftr 3i Dialysate flow0,600 - 9600m1/hr, regulated or 100 - 8000m1/hr 4) Plasma exchange rate 0, I 0 - 5omumin, regulated 5) Ultra filtration rate 0 - 6000ml/hr, regulated or 0 - 2000myhr 5. Balancing l) Number of scales 4 or 3 2) Measuring principlegraYimetric 3) Max. load on scale 12 kg or I lkg 4) Resolution lg 5) Deviation in lineadty max. +l7o 6. Heating l) Substituate temperature up to 39'C or 40oC 2) Dialysis fluid temporature up to 39"C or 40oC 7. Features | ) Screen I 0.4", TFT-LCD or High Resolution Color sqeen 2) Service menu setting via screen 8, Extracorporeal blood circuit and protoctive systems l) Arterial pressure monitoring - Display range -280 to +300 mmHg or -250 to +300mmHg - Acturacy + | ommHg or+8mmHg 2) Venous pressure monitoring - Display range -80 to +500 mmHg or -50 to +350mmHg - Accuracy +lommHg or +8mmHg 3) Transmembrane pressure monitoring - Display range - 60 to + 520 mmHg - Accuracy 110 mmHg 4) Pre-filter pressure - Measuring range 0 to +750mmHg or'50 to+500mmHg - Accuracy +10 mmHg or t8mmHg 5) Air detector - Measuring principle detection by ultrasound transmission, additional optical monitoring in venous clamp - Sensitivity drop in fluid level, air bubbles or micro foam 6) Blood leak detector - Measuring principle optical - Sensitivity S 0.5 mLblood/min HCT 32 % at maximum filtrate flow 7) Sringe pump (anticoagulants) - Continuous flow 0,0.1 - 25m1,/h or 0.0.5 - 5.0m1/h - Bolus function 0,0.1 - 5ml/Bolus C. Consist of l. Main Body l) Pump 2) Display 3) Pressure Port 4) Air Detector & Venous Bubble Catcher 5) Heater 6) Venous Line Clamp & Optical Detector 7) Blood Leak Detector 8) Operation manual 9) Service manual D. Remark l.

Warranty :3 years.

37FULLY

MOTORIZED ICU

Should be CE/USFDA approved model.• Should comply to IEC 60601-2-52: Particular requirement for basic safety& essential performance of medical beds. IEC Type testing Report should be either

4

S. No.



BED WITH BED SIDE LOCKER

submitted or the Standard should be confirmed to be meeting in the CE/USFDA Certificate.• Manufacturer should have ISO 9001 certification for quality managementstandards.• Manufacturer should have ISO 14001 certification for environmental management systems.• Manufacturer should have BS OHSAS 18001 certification for occupational health& safety management.1. Overall size should be approx. 2100mm L x 1020mm W x 450mm to 770mm H (without Mattress) with deviation of ±10%.2. Bed frame size 2050mm L x 960 mm W Four section CRCA top with epoxy coating.3. Should have perforated top with thickness of 18G.4. Bed should be electrically operated: Wired remote control or integrated panel for easy to operate various position like; height, back, trendelenburg positions, foot movement etc. by touching single fold protection button.5. It should have CPR button for emergency override to turn the backrest to flatposition quickly and instantly. Battery backup with inbuilt battery charger should be provided. The hand control box and the nurse hand control should have indications for power on and the battery charge.6. Backrest and leg rest both shall have inbuilt three mattress guards. Backrest,legrest and height adjustment positions should be operated by Electro mechanical adjustment through hand control box; an additional nurses’ control box, in addition to operating and locking of above functions, shall have trendelenburg/reverse trendelenburg positions. 7. Degree indicator with digital display should be required for backrest, upper leg elevation & Trendelenburg /Reverse trendelenburg positions.8. All electro mechanical actuators should have degree of protection of IP54.9. Backrest and upper leg section should retract as they are individually and simultaneously raised.10. Should have provision for placement of hand sanitizer in leg end.11. Bed frame should be mainly made from 50mm x 25mm x 1.5 mm thick ERW tube with proper support. This frame should be fitted on the base mainly made of

S. No.



dia 80 x 1.5 mm ERW tubes with supportive C channel of thickness 2mm on various supporting links. The base frame should be mounted on 125mm dia non- rusting castor wheels with central and directional locking mechanism and pedal operated at the foot end of the bed.12. The bed should have easily detachable moulded head & foot side panels andfour corner buffers. Bed should have split type swing down side railings, 2 nos. on each side made from non-rusting polymer moulded material.13. Gap between Head/ Foot board and end of side railing should not be more than 60 mm & gap between adjacent railings should be less than 120mm to avoid patient fall or entrapment.14. Height of side rails from top of the mattress without compression should bemore than 220mm15. There should be two locations on the head side of a bed to hold one stainless steel Saline rod 12mm dia with 30mm dia, 18 g stainless steel outer covering tube holder with knob to fix syringe pump holders. Quick manual backrest release system with operating lever on both side of top frame.16. Should have twin wheel castor of 125mm diameter with directional lock &braking facility.17. Bed should have radio translucent top (X-Ray translucent back section) with 4 section quality radio translucent foam mattress (PU foam of high density > 30Kg/M3 with PVC rexine covering) and X-Ray cassette holder. All mild steel components should be thoroughly in-house pretreated chemically to remove rust, grease, oil, etc. by dip tank processes, including separate degreasing, pickling, phosphating each followed by water rising passivating and hot air drying to give phosphate coating.18. The treated metal surface should then be coated in house with epoxypolyester powder with paint film thickness of 60microns (minimum) and oven backed at 180 deg to 200 deg centigrade. All Stainless Steel used should be of medical grade 304 Grade. 19. Power supply should be 230V, 50Hz fitted with Indian plug.

Accessories to be supplied:• MS Powder coated urine Bag Holder - 1no.

S. No.



• Plastic moulded File/ Chart Holder – 1 no.• Hand Sanitizer holder: 1No.• Four section X-ray translucent mattress with cover, 4” thick high quality foam,antimicrobial and flame retardant mattress cover– 1no.• MS powder coated Oxygen cage cylinder cage – 1no.• SS 304 grade traction pulley attachmentBed Side Locker1. Overall Size (Approx): 40 (H) x 40 (W) x 80 (H) cms.2. Should have an enclosed locker unit which is provided with 50 mm dia. non rusting castors for mobility.3. Should have steel laminated tray top with raised borders on 3 sides forming the upper surface.4. Drawer should be fitted with smooth slides.5. Should be provided with shelf space for storage under the Drawer with lockedCabinet at below.6. Drawer and cabinet should have front door.7. Should have one drawer & one cabinet box with shelf space in between.8. The body should be made of 20 G MS CRCA sheet.9. Two buffers shall be provided at rear side of the locker box.10. All MS parts to be pre-treated and epoxy powder coated.11. All Stainless steel of should be of 304 Grade and 16 Gauge.(Bed side locker & ICU bed motorized should be from same manufacturer)Power supply:• Power input to be 220 – 240V AC, 50Hz fitted with Indian plug of appropriate ratingWarranty: Should have 3yrs. of manufacturer warranty.

38 MULTIPARA MONITOR (HIGH

END)

1. Advanced high end modular patient monitor having integrated non-invasive, invasive measurement & features suitable for neonate, paediatrics & adult patients.2. Monitor must have bright, highly visible minimum 19”/2 0” color TFT displaywith full touch screen facility.3. Monitor must have the facility to display minimum 12 waveform or more, along

6

S. No.



with related numerical parameters on single screen.4. Monitors must be able to monitor ECG, SpO2, NIBP, Respiration, dual temp,dual IBP, modular EtCO2 and minimally invasive Continuous Cardiac Output simultaneously. Out of these mentioned parameters ECG, Respiration, NIBP, SpO2, Invasive pressure and Temperature should be monitored through one server/ module5. Monitor must be ready to be upgraded to connect modules for CO (Thermodilution), BIS, NMT Module, ICP monitoring, Three IBP, Spirometry, EEG module and it should be capable to monitor all these parameters simultaneously along with parameters mentioned above.6. Monitor should be upgradable to have TcpO2/ TcpCO2 parameter.7. Monitor must have advanced arrhythmia detection and ST Analysis as standard feature.8. System must have minimum 24 hours review data including graphical and tabular trends, arrhythmia event recalls.9. Monitor must have the time linked review function. Monitor must show the waveforms for the time when the arrhythmia occurred in case of arrhythmia recall.10. Monitor must have facility to display 12 lead ECG through 5/6 lead ECG cable.11. Monitor should have ST segment calculations.12. Must have facility to hook up with network printer, at any point of time and able to take print any review data (Trends, Graphs, waveform full disclosure, arrhythmia recall etc.)13. Must have facility to hook up with network printer, at any point of time andable to take print any review data (Trends, Graphs, waveform full disclosure, arrhythmia recall etc.)14. Monitor must be able to connect to central monitoring station and should use single network for all kind of networking with the central station or other hospital information system (HIS).15. When disconnected from the central monitor, all monitors must be capable of full arrhythmia detection and storage. 16. Monitor should have battery back up for minimum 60 minutes.17. Alarm parameter shall flash red in the presence of high priority alarms (e.g.

S. No.



ventricular fibrillation and asystole) and flash yellow in the presence of medium or low priority alarms (e.g. noisy signal, etc.)18. Vital sign data of the patient should be transferable through the modules offered.19. Each monitor to be supplied with following:a) 3 and 5 Lead ECG electrode cable: 2 No. eachb) Adult, Paediatric and Neonate SpO2 probe: 2 No. each ( Ear lobe probes for neonates )c) NIBP cuffs for Adult, Paediatrics and Neonates: 2 no each of different sizes d) Temp Probe: 2 Nos. (skin & oesophageal one each)e) IBP connection cable: 03 Nos.f) IBP Disposable Pressure Transducers: 10 Nos. g) EtCO2 sample line: 10 nos. (if applicable)Modules requirement:• All parameter modules should be compatible with the quoted model of monitor and must be supplied with required patient probe.a) ECG, SpO2, NIBP, Respiration, Dual temp, (All independent/dual/combined): 1No. each b) Three IBP, EtCO2: 1No. eachc) Minimally invasive continuous CO monitoring: 1No. each d) NMT, EEG and Spirometry, BIS/Entropy: 1No. eache) TcpO2/ TcpCO2: 1No.[Price for the individual modules along with patient probe & cables should be quoted separately in the price bid which will be taken into price evaluation.]Power supply:Power input to be 220 – 240V AC, 50Hz fitted with Indian plug of appropriate ratingWarranty: Should have 3yrs. of manufacturer warranty.

39. OXYGEN

CONCENTRATOR (Single Outlet)

1. Oxygen concentrator to provide oxygen from ambient air.2. Oxygen concentration should be measured at the flow meter by oxygen sensing device (OSD).3. Should have oxygen purity indicator/alarm for low oxygen concentration.4. Sound level ≤53 dB5. Superior grade of molecular sieve bed of minimum working hour of

6

S. No.



15,000hrs.6. Integrated Timer should be there.7. Maintenance free rotary proppet valve.8. Should have audio and visual alarm for Low oxygen concentration, low pressure and power failure.9. The unit should be movable and should be provided with four wheels with at least two breaks.10. Oxygen concentration 90% ±3% at 5LPM flow.11. Oxygen output, approx: 0.5 to 5 LPM12. Oxygen outlet Pressure: Approx. 5 psi.13. Single outlet for oxygen Delivery controlled from a pressure-compensated flow meter to ensure accurate flow display.

Supplied with:Ø Adult & Neonatal mask: 2Nos. eachØ Spare set of tubing: 1No.Ø Flow splitter: 1No.Ø Spare set of internal and external filters (bacterial): 2Nos.Ø Humidifier bottles: 2Nos.Ø Cabinet filters: 2Nos.Ø Spare set of fuses: 2Nos.Power SupplyPower input to be 220-240VAC, 50Hz fitted with Indian plug of suitablerating.

Warranty: Should have 3yrs. of manufacturer warranty.

40PATIENT

WARMING SYSTEM

1. Should work on forced air warming therapy.2. Should be hose end temperature sensing.3. Should be increased airflow rates Air flow more than 45 cfm.4. Should be Micro processor based with digital display for three temperature setting upto 44°C along with room temp.5. Should have display for ongoing delivery temperature to the patient.6. Temperature variation should not be more than ± 1.5%.

4

S. No.



7. High efficiency air filter should be of 0.2 micron with filter life of minimum 2000hrs.8. Should have built in hour meter makes it easy to monitor usage for preventive maintenance.9. Should have over temperature calibration and fault code servicing right on the front panel (No need to open the unit frequently).10. Should be compatible to work on different size of blanket like under body,lower body, upper body and full body.11. Noise level not more than 55dB.Blanket properties:• Flexible, easy to use designs• Uniform perforation pattern across the blanket surface ensures even convective warming• Resealable hose ports (where applicable)• Soft, radiolucent, latex-free materials• Should provide full body blankets of adult & paediatric size of 5nos. each along with the machine.

Power supply:Power input to be 220 – 240V AC, 50Hz fitted with Indian plug of appropriate rating

Warranty: Should have 3yrs. of manufacturer warranty.41 SPECIFICATIONS

FOR DIGITAL MOBILE X-RAY

Battery Driven, compact, easily transportable digital with flat panel detector mobile radiographic unit with telescopic/articulated arm with inbuilt DAP meter suitable for bedside X-Ray for ward patients, intensive care unit and operation theatre. It must include the following:A. Generator:1. It should be microprocessor controlled high frequency with output 32 KW or more.2. KV range: 40 KV to 125 KV or more.3. Tube current: 300 mA or 4. It should have an electronic timer with shortest exposure time – 1ms or less.

2

S. No.



5. It should have a digital display of mAs and KV.

B. X-Ray Tube:1. Output should match the output of the generator.2. It must be a rotating anode type with 3000 rpm or more.3. Focal spot size of X-Ray tube should be between 0.6 to 1.2 mm.4. Anode heat storage capacity should be 120 KHU or more.5. Multi leaf collimator with FFD display should be supplied with the system.

C. Flat panel detector:1. The flat panel detector made up of amorphous selenium/silicon with CsIscientillator size atleast 14” x 17” (Wi Fi enabled wireless).2. The detector pixel matrix should be 2k x 2k or more with DQE atleast 65%.3. Pixel size should be 150 µm or less.4. The machine should have provision for detector storage compartment.5. The image processing time after exposure should not be more than 5 sec.6. Weight of the detector shouldn’t be > 5 Kg.

D. Battery:1. The machine should be able to run on mains as well as on battery supply.Please specify battery backup time/number of exposures.2. The battery should also provide power for the motor to move the machine. 3. The battery should be able to be charged 80% from a normal 15A, 220-240V single phase socket in less than 4 hours & should be capable of generating at least 100 exposures.E. Inbuilt Console:1. The machine should have an integrated/inbuilt console with a TFT touch screen with size at least 14 inches.2. The console should be able to view the image, and provide post processing features, using touch screen.3.The post processing features should include zoom, contrast and brightness adjustment etc.4.It should have image storage memory of at least 3000 images.

S. No.



5.The monitor should have minimum 1.0 Mega Pixel resolution.

F. Other features:1. The unit must have an effective braking system for parking, transport and emergency braking. The tube stand must be fully counter balanced with rotation in all directions.2. It must have a telescopic/articulated arm for maximum positioning flexibility in any patient position. The angles in various planes to be specified by the manufacturer. The cables should preferably be concealed in the arm system.3.The facility for exposures with remote control/detachable exposure switch should be possible.4.Detachable exposure switch should be supplied with a chord of at least 5 meters.5.A grid of 8:1 ratio with size atleast 14”x17” should be supplied.6.The x-ray unit and detector should meet European CE & USA FDA approval standards.7.The system offered should have AERB Type approval/NOC for installation and use in India.

G. Connectivity:The machine should be fully network ready and it should be possible to transfer images and patient data from and to hospital network using LAN connectivity or wireless LAN.

H. Power Line ConnectionThe unit should be able to operate on single-phase power supply with plug-in facility to any standard wall outlet with automatic adaptation to line voltage 200 to 240 volts, 15Amp plug.

42VIDEO

LARYNGOSCOPE

Laryngoscope required with video illumination to visualize and document the operational area on screen. It should consist of following features:• Required is Macintosh blades with closed European Metal finish size2, 3 and4 with integrated camera chip and LED light illumination for obtaining more than

1

S. No.



50,000 Lux of brightness.• Mac blade should not require any stylet for tube placement.• One special blade for difficult intubation with device for introduction of suction catheter for size 16-18 Fr., angle of view should be approx 80 degree.• One miller size 0 & 1 blade should present in the set.• Screen 7inch or more in size for display with feature control buttons on the screen with HDMI or HD output for connecting to a big screen. Two output ports with monitor to connect scope and video laryngoscope at one time and toggle button to use the same once at a time• Automatic/ manual white balance facility should be available• Documentation of Video & still images should be possible on data card or USB drive with JPEG and MPEG4 format which can be easily transferred to the computer/laptop. Documented videos & still images should be easily recalled on the monitor.• Monitor should have a facility to connect flexible scope directly without any special coupler or accessory.• Integrated recording should be done on a USB drive/internal memory. • Soft bag should be supplied to place the monitor and system can also be operated without taking monitor out from the bag.• Magill forceps for foreign body removal and for assisting nasal intubation should be provided.• IV Stand for positioning the monitor with tray for laryngoscopes should be provided• Accessories like protection cap, tray for cleaning and sterilization of blades (atleast two blades at a time) should be provided.• Blades and connection cable should be fully immersible in disinfecting solution.• Electronic Module to connect blades with monitor suitable for manual and mechanical disinfection up to 60 °C; Steris®; Sterrad®; High Level Disinfection (HLD) acc. to US standards, for use with video laryngoscopes• Stand for monitor, height 120 cm, rollable with five legs and antistatic castors,crossbar 25 cm x diameter 25 mm for positioning the monitor, with tray, dimensions (w x d x h): 30 x 20 x 10 cm use with: 8401YAA Crossbar 8401YB

S. No.



Crossbar.Power supply:Power input to be 220 – 240V AC, 50Hz fitted with Indian plug of appropriate ratingWarranty: Should have 3yrs. of manufacturer warranty.

All prices should be quoted in Euro only.

All items in this tender will be subject to export control procedures and therefore all vendors should be able to obtain appropriate licences and permissions to ship these items into Syria.

All tenders are required to be submitted before Friday 27th December 2019, 1.00 pm UK time pursuant to the attached guidelines for submitting a quotation and be returned to

[email protected]

For any issues relating to the tender or its contents please email directly to

[email protected]

All quotation providers are requested to fill in Appendix 1 and 2 below when submitting their proposal to IRW.

APPENDIX 1

Summary of Bid Prices

No. Description Total Price in EURO (€)

1 Grand Total Bid Price

2 Discount Ratio (if any) … % and the amount

3 Grand Total after Discount

4 Delivery time scales (in days)

We have carefully checked and examined all bid documents and we are offering the costs above on a fixed basis and they are not subject to any changes or alterations including those due to currency fluctuations.

Total Price EURO (€):

In words [______________________________________]

Bidder’s Signature Stamp Date

Bidder is required to stamp this document with their legal company stamp no bid will be accepted without a genuine company stamp

APPENDIX 2

1. Updated Company Profile with all registration certificates2. Provide copy of previous awarded Contracts / Purchase Orders completed in last 2 years for similar trade3. Total value of contracts completed in last 2 years in a similar transaction4. Evidence of having own manufacturing facilities or distributor of mentioned items 5. Expertise and experience in the NGO sector or with Islamic Relief Worldwide6. Company capital / Sermayah

mailto:[email protected]

mailto:[email protected]

Documents

TENDER OF MEDICAL EQUIPMENT TO SYRIA, REF. …€¦ · Web viewShould be compatible with multiple brands of Syringes available in market.• Disposable Syringes in nominal sizes of