Temperature & Humidity Control Cabinet

Acm-78092-S

Temperature & Humidity

Control Cabinet

TECHNOCRACY PVT. LTD.

Temperature & Humidity

Control Cabinet



Product Overview

Construction Details

Humidity & Temperature Control Cabinet are well designed for conducting different laboratory and

research experiments for different quality control tests to be carried out on different materials e.g.

cement, motors, various electrical fittings, electronic circuits and components, cloth and paper etc.

under controlled temp. and humidity conditions.

Weiber Humidity and Temperature controlled cabinets are double walled convection heated and cooled

units. Outer body of our Humidity and Temperature controlled cabinets are constructed out

enamel or elegantly powder coated. The inner chamber is made of heavy gauge stain less steel sheet of

SS-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures

maximum thermal efficiency in our chambers.

The unit is provided with one door. This door is provided with magnetic door closer. The door is made of

mild steel sheet lined with stainless steel from inside. This door is provided with lock and key

arrangement. The unit is mounted on a sturdy steel frame The unit is provided with various customized

shelves in various permutations and combinations to suit individual requirements. The triple walled back

of our Humidity and Temperature controlled cabinets are provided with one/ two air circulation fans for

uniform maintenance of the temperature throughout the chamber.

of thick PCRC sheet duly pre-treated with primers and rust proofing and painted with long lasting stove

Cooling

An energy efficient cooling unit is installed in our echambers to enable bio chemical demand , cyclic and

growth studies at lower room temperatures. We use ISI marked high end CFC free compressors of

Kirloskar/Tecumseh make, conforming to latest international standards and guidelines.

Heating

Indirect heating system is provided in our units, comprising of air heaters made of high grade stainless

steel plate heating system of suitable wattage. The warm air is evenly distributed throughout the

chamber through efficient motor fans ensuring a very good temperature sensitivity.


Humidity Range

Humidification

Humidity Sensitivity

30% to 90% (Humidity Applicable as per the Temperature Humidity Graph Attached).

A low-pressure droplet free vapor boiler using direct vaporization system is used. Water Reservoir is

provided at the side of the chamber with. The de-mineralized water or single distilled water supply to the

humidity inlet having a resistance measurement of approximately 50,000 – 200,000 Ohm/cm is

provided with the unit.

Humidity is controlled by mean of an electronic humidity controller cum indicator with an accuracy of +

5%

Front Panel

oTemperature inside our environmental chambers are controlled with a sensitivity of + 0.5 c or better.

Temperature Control

Temperature Range

The temperature inside our chambers is controlled through programmable micro-processor based

temperature controller cum indicator.

o o oTemperature range of our standard walk in Incubator models are 5 c to 60 c or 5 c above ambient otemperature to 60 c However we have the capacity to modify the same to suit the individual specialized

requirements of our customers.


Mineral Glass Wool Insulation

Air circulation

Glass mineral wool is one of the most environmentally friendly, stable and sustainable insulants

available. Glass wool is incombustible by nature. Euro class classification is A. It does not propagate

flames and toxic smokes. Thanks to a dense entanglement of materials with a low conduction and

trapping a great amount of air, glass wool is a an excellent thermal insulant. The thickest it is, the best

thermal resistance it has, thus reducing heat losses in our equipments for better sensitivity and

economical operations and its impact on the environment in manufacture, use and disposal is minimal.

Triple walled back of unit is fitted with two air circulation fans for maintaining temperature uniformly

throughout the chamber

Features of Coaxial Circulation Fan:

· Vacuum impregnated stator winding with dr. back varnish under red baktol

· non-hygroscopic.

· Best IR value

· Bright bar (EN - 8 class) shaft.

· Bush bearing of branded companies.

Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator.

· Pressure die-casted-rotor manufactured with zero error.

· Boats of high accuracy

Size of Inner chamber :–

W x H x D

455 x 710 x 455 mm

605 605 x 605 mm

606 605 x 910 x 605 mm


Refrigeration Unit

Refrigeration unit is formed by ISI marked compressor/cooling kit of Kioloskar Copeland or Tecumseh.

Features

· High Energy Efficiency

· Compact

· Ozone-friendly refrigerants

· Proven Technology

Wide Voltage Range

APPLICATION

Evaporating Temp Range

Refrigerant

Refrigerant Control

Compressor Cooling

General Applications

0-60 Degree C

R- 134a

CAPILLARY

STATIC

REFRIGERATOR/ DEEP FREEZER


Cooling Capacity -Rated

Power input -Rated

Energy Efficiency Ratio

Current - Rated

LRA -Rated

Evaporating Temperature

Condensing Temperature

Liquid Sub Cooling Temp

Return Gas Temperature

Ambient Temperature

Pressure - Suction

Pressure - Discharge

RATED PERFORMANCE

80-110 Watts (Model Specific)

3.53 Btu/Whr

0.70 Amps

N/A

0-23.3 C

054 C

032 C

032 C

032 C

20.32 Kg/Cm

2 12.9 Kg/Cm

282 – 650 Btu/hr (Model specific)

Design

Displacement/Revolution

No. of Cylinders

Speed (Nominal)

RECIPROCATING

3.14 CC

One

N/A

MECHANICAL DATA


MOTOR DATA

Motor Type

Frequency

Phase

Voltage -Rated

Voltage -Range

High Potential Test

OVER LOAD PROTECTOR

Type

PTCSIR

50 Hz

SINGLE

230 Volts

N/A

N/A

EXTERNAL

Oil Charge

Weight

Internal Pressure Relief

Valve

230 CC

7.3 Kgs

PROVIDED


Humidity Vs Temperature Graph

Standard Humidty Range

Above is a chart that shows the achievable range of humidity as compared to temperature

Technical Specifications

Temperature variation (time)

Temperature deviation (spatial)

Readability/ Set ability

Temperature range ***

0.5

0.5

0.5

5°C to 60°C / 5°C above ambient to 60°C

+/-°C

+/-°C

°C

°C


Technical Specifications

Sensor thermocouple

Controller

Display

Adjustable alarm limits (visual and acoustic)

Safety thermostats

Temperature variation (time)

Sensor thermocouple

Automatic setting

Adjustable limits

Accessories

Timer (1-999 minutes or hours)

Real Time Program

Printer Report Program

Serieal Data Port

Inspection window in door

Shelves

Standard/ max

Dimensions w,d

Max load per shelf

Permitted total load

Accessories

Printer Report Program

2 x 24 characters LCD Display

Access Port 30 mm

Inspection window in door with cover

Castors, lockable

Power consumption

Nominal power

Nominal voltage

Frequency

Type K

Solid State digital Controller/PID optional

LED/LCD

Optional

3 (With PID Controllers only)

Type K

Yes (With PID Controllers only)

Yes (With PID Controllers only)

optional

optional

optional

optional

optional

2- 6 (depending on the internal size

As per the individual model

20

80 kg (Max Internal Size)

optional

optional

optional

optional

Yes

850

230, 1~

50/60

+/-°C

RS232

mm

kg

kg

W

V

Hz


Features

Optional Upgrades For Environmental chamber (If Desired)

Data Acquisition And Control System For Environmental Chamber.:

Our system is provided with user friendly custom developed software which obtains and analyze the

data and facilitates the user to generate reports and graphs etc.

This is unique module which can be incorporated with our environmental chamber to log in temperature

and environment related data with a help of a data logger unit which has a pc connectivity by means of

RS 232 C interface. This data is then analyzed and formatted with the help of our unique user friendly

analysis software to enable the user to get a formatted and analyzed reports of various inputs during the

full operation cycle of the equipment. This is an ideal module for pharmaceutical laboratories, process

control applications and high research projects where maintaining a viable record of the performance of

the equipment is very essential.

· Our system incorporates multiple Devices such as in line process Indicators, environment scanners

and temperature or humidity controllers.

· Provides Astech cable for direct interface to any dot matrix or laser printer for online or offline data

records printing

· It has Bulk data storage capacity with high data retention life.

· Facility to obtain nicely formatted print our of the logged data or records with proper headers.

· Our system provided facility to program recording interval with various options to suit individual

requirements.

· It is provided with the feature to adjust or select baud rate for any serial communication port.

Universal Digital Data Recorder with Computer


SALES OFFICE (INDIA)

SALES OFFICE (HONG KONG)

SHOWROOM

SALES OFFICE (RUSSIA)

1075 & 1077, 10th Floor, Aggarwal Millenium Tower-II

Netaji Subhash Place, Pitam Pura, Delhi- 110034

Land Line No.: 46102306, 43034339, 47321068, 46102305

Mobile No.: 09312219738, 09717741167, 09873266634

E-mail.: [email protected], [email protected], [email protected]

www.acmasindia.com www.scientificlaboratoryequipments.com www.measuring-meters.com

Unit D 28 11/F Wing Tat Comm,Bidg 97, Bonham Strand East,

Sheung Wan, Hong Kong (PRC)

Tel.: 0086-13929598046 0086- 18922303099

E-mail.: [email protected]

141, Raj Industrial Estate, Rai, Sonepat,

Haryana- 131029, INDIA

Tel.: 0091-0-9312219738 (M) +91- 9717741167


Inmed Trade Street Ozerkovsky Embankment,Unit No 50, Straine- 1, Off- 502, Moscow, Russia


Tel.: 0049- 79592345 Email: [email protected]

An ISO 9001 : 2208 ISO 14001 : 2008 ISO 13485

WHO: GMP Products GLP Compliant Products

Documents

Temperature & Humidity Control Cabinet