Upload
gargimukherjee
View
8
Download
2
Tags:
Embed Size (px)
DESCRIPTION
Television Program Production
Citation preview
CONTENT No. Lesson Writer Vetter Page No. 01 Radio & Television Prof. W. A. Qazi Prof. B. K. Kuthiala 13
as Mass Media 02 Radio Programme Sh. Sushil K. Singh Prof. B. K. Kuthiala 14 Production 03 Television Programme Sh. Sushil K. Singh Prof. B. K. Kuthiala 21 Production 04 Editing for Prof. Chandra Bhushan Sh. Sushil K. Singh 10 Radio & Television 05 All India Radio & Prof. Manoj Dayal Prof. Sushma Gandhi 10
Doordarshan
06 Radio & Television Sh. Sushil K. Singh Sh. M. R. Patra Broadcasting
Converted in to SIM format by: SH. RAHUL KAPIL
ABOUT THE AUTHORS AND VETTERS: Prof. B. K. Kuthiala Dean, Faculty of Media, Kurukshetra University, Kurukshetra , Haryana 125 001 Prof. Manoj Dayal Dean, Faculty of Media Studies, Guru Jambheshwar University of Science & Technology, Hisar, Haryana 125 001 Prof. Sushma Gandhi Chairperson, Department of Communication Management & Technology, Guru Jambheshwar University of Science & Technology, Hisar, Haryana 125 001 Prof. W. A. Qazi Former Professor, I.I.M.C., New Delhi Sh. M. R. Patra Lecturer, Department of Communication Management & Technology, Guru Jambheshwar University of Science & Technology, Hisar, Haryana 125 001 Sh. Sushil K. Singh Lecturer, Department of Communication Management & Technology, Guru Jambheshwar University of Science & Technology, Hisar, Haryana 125 001
M. A. Mass Communication (1st year) / PGDMC ELECTRONIC MEDIA MMC 104 / PGDMC 104 Lesson: 1
RADIO AND TELEVISION AS MASS MEDIA
Writer: Prof. W. A. Qazi Retired. Professor, Dept. of Journalism, IIMC, New Delhi.
Vetter: Prof. B. K. Kuthiala Chairperson, Dept of Mass Communication, Kurukshetra University, Kurukshetra. Converted in to SIM format by: Sh. Rahul Kapil Associate Producer, ZEE News, New Delhi
LESSON STRUCTURE: In this lesson, we shall discuss about radio and television. First we shall start with the
strengths and weaknesses of radio and television. Then we shall focus on the history and
present scenario of radio and television. Next we shall focus on the reach of radio and
television. Finally, we shall try to peep into the future of radio and television. The lesson
structure shall be as follows:
1.0 Objectives
1.1 Introduction
1.2 Presentation of Content
1.2.1 Strengths and Weaknesses of Radio and Television
1.2.2 History of Radio and Television
1.2.3 Present Scenario of Radio and Television
1.2.4 Reach of Radio and Television
1.2.5 Future of Radio and Television
1.3 Summary
1.4 Key Words
1.5 Self-Assessment-Questions (SAQs)
1.6 References/Suggested Reading
1.0 OBJECTIVES: The objectives of this lesson are as follows:
To study the Strengths and Weaknesses of Radio and Television; To study the History of Radio and Television;
To study the Present Scenario of Radio and Television; To study the Reach of Radio and Television; To study the Future of Radio and Television;
1.1 INTRODUCTION: Rapid communication through latest technology has facilitated speedy information
gathering and dissemination and this has become an essential part of the modern
society. It was Marshall McLuhan who said that electronic technology is reshaping and restructuring patterns of social interdependence and every aspect
of our personal life. Extraordinary information explosion have dramatically shrunk
time and distance and have converted our world into a Global Village.
Electronic media have transformed communication and our ability to share,
store and gain information and knowledge. The widely available media services
are changing the ways in which we live and work and also altering our
perceptions and beliefs. It is essential that we understand these changes and
effects in order to develop our electronic resources for the benefit of society.
These changes are:
o It has abolished distances and time in disseminating the information, events and ideas.
o People's access to information has become easy and universal. o External control of information flows has become more difficult. o Information exchange has come cheaper and simple. o It has become easy to have two-way interaction and exchange of ideas. o Wide reach and low reception costs encourage centralised information
dissemination.
o With multi-channels listeners and viewers have opportunity to pick and choose among the programmes of their likings?
o Politically two-way media are democratic in which each party is equally empowered to raise new issues on electronic network.
Networks are not new. "Hard" networks such as road, rail, electric and water
supply networks have been with us for ages. "Soft" networks such as computer
programmes, radio and television are equally important in relations to our needs,
usefulness to our culture.
0.1 PRESENTATION OF CONTENT: The content of this lesson shall be presented as follows:
o Strengths and Weaknesses of Radio and Television o History of Radio and Television o Present Scenario of Radio and Television o Reach of Radio and Television o Future of Radio and Television
1.2.1 STRENGTHS OF RADIO AND TELEVISION: Radio and Television have their own characteristics. UNESCO has enumerated
the following strengths and weaknesses of radio and television.
STRENGTHS AND WEAKNESSES OF RADIO:
Strengths Weaknesses # It has imaginative potential to # It requires a fully
listener to add his/her own developed radio
visual interpretation network.
# Receivers are relatively cheap # It is a non-visual
and portable medium
# It is relatively inexpensive in # Trained personnel
production terms are required.
# As an entertainment medium, # Knowledge of local
it is psychologically languages is
acceptable. essential.
# As a major news source it
is widely heard and accepted.
It has massive, immediate
distribution.
STRENGTHS AND WEAKNESSES OF TELEVISION: Strengths Weaknesses # It is a visual medium which # It requires a fully
allows for a creative developed TV network
production approach and electric supply.
# As an entertainment medium, # TV Receivers are
it is very acceptable expensive
psychologically.
# As a major news source, it is # It is expensive, both
widely seen and accepted. in production and
utilization, unless
used extensively.
# It has immediate distribution # It requires highly
which can be massive. trained production
and operational
personnel.
1.2.2 HISTORY OF RADIO AND TELEVISION: Historically speaking, Marconi started radio broadcasting in 1896 with the
invention of first wireless telegraph link. It took ten years since then for the first
demonstration of radio broadcasting to establish but it was hard to distinguish
words from music.
Another successful demonstration took place from the Eiffel Tower in Paris
in 1908. A New York Station transmitted the first radio news bulletin in 1916 on
the occasion of the election of US President. By 1927, broadcasting services
were started as a major medium of information.
Radio broadcasting in India began as a private venture in 1923 and 1924,
when three radio clubs were established in Bombay, Calcutta and Madras (now
Chennai). The Radio Club broadcast the first radio programme in India in June
1923. The daily broadcasts of 2 to 3 hours consisted mainly of music and talks.
These stations had to close down in 1927 for lack of sufficient financial support.
It was followed by the setting up a Broadcasting Service that began
broadcasting in India in July 1927 on an experimental basis at Bombay and a
month later at Calcutta under an agreement between the Government of India
and a private company called the Indian Broadcasting Company Ltd. Faced with a
widespread public outcry against the closure of the IBC, the Government
acquired its assets and constituted the Indian Broadcasting Service under the
Department of Labour and Industries. Since then, broadcasting in India has
remained under Government control.
In 1936, a radio station was commissioned in Delhi. In the same year, the
Indian Broadcasting Service was renamed All India Radio (AIR) and a new
signature tune was added. The Delhi station became the nucleus of broadcasting
at the national level.
All India Radio has come a long way since June 1936. When India became
Independent, the AIR network had only six stations at Delhi, Bombay, Calcutta,
Madras, Lucknow and Tiruchirapalli with 18 transmitters - six on the medium
wave and the remaining on short wave, Radio listening on medium wave was
confined to the urban elite of these cities.
Radio broadcasting assumed considerable importance with the outbreak of
World War II. By 1939, the entire country was covered by a short-wave service
and the programme structure underwent a change to meet wartime contingencies.
During this period, news and political commentaries were introduced and special
broadcasts were made for the people on the strategic northeastern and
northwestern borders.
After Independence, the broadcast scenario has dramatically changed with
198 broadcasting centers, including 74 local radio stations, covering more than
97.3 per cent of the country's population. Presently, it broadcasts programmes in
a number of languages throughout the day. The function in of All India Radio is
unparalleled in sense that it is perhaps the only news organizations, which
remain active, round-the-clock and never sleeps.
Mostly the broadcasting centers are full-fledged stations with a network of
medium wave, short wave and FM transmission. Besides, the external services
Division of AIR is a link with different regions of world through its programmes in
as many as 24 languages for about 72 hours a day.
HISTORY OF TELEVISION: Television began in India way back in 1959 as a part of All India Radio when it
was formally commissioned on September 15 as an experimental service. Its aim
was to promote social education and general awareness. It was not until Mrs.
Indira Gandhi was in charge of the Information and Broadcasting Ministry that
television was commissioned as a regular daily service from 15th August 1965.
Now television transmitters carry Doordarshan signals to almost three fourth of
the country's population.
On August 1, 1975 a Satellite Instructional Television Experiment (SITE)
was launched with the help of an American Satellite for a period of one year when
2400 villages in six states - Orissa, Bihar, Rajasthan, Madhya Pradesh, Andhra
Pradesh and Karnataka were exposed to area specific programmes beamed with
the help of the satellite.
The experiment was successful and was universally lauded. The
programme content had the three necessary ingredients of entertainment,
education and information. There was no denying that Doordarshan had become
a catalyst to social change.
One of the most popular programmes of Doordarshan has been the rural
programme called "Krishi Darshan" which was launched on 26 January 1967.
Doordarshan also caters to many schools and universities in the country through
its Educational TV and Open University programmes. In 1982, Doordarshan went
into colour and created its own national network through the help of INSAT- I A.
Now with the help of INSAT-1B and Microwave facilities, Doordarshan is able to
cater to a very wide area of the country in terms of imparting information and
entertainment.
Some of the significant presentations have been the IX Asian Games, the
NAM summit, the CHOGUM conference, Republic Day Parades, Independence
Day Celebrations, etc.
Television went commercial from January 1, 1976 and now good numbers
of sponsored programmes are telecast on Doordarshan, increasing its revenue.
On March 22, 2000, INSAT- 3 B was launched under the INSAT series. It
has three Ku-band transponders with 12 extended C-band transponders and S-
band mobile Satellite service payloads. This will double the capacity, which was
earlier, provided by seven transponders of INSAT-2B and INSAT-2C.
INSAT-3B, besides providing business communication, development
communication and mobile communication, will also provide set of transponders
for the Swarna Jayanthi Vidya Vikas Upagraha Yojana for Vidya Vahini, an exclusive educational channel.
1.2.3 PRESENT SECENARIO OF RADIO AND TELEVISION: Presently, AIR is utilizing satellite services for transmission of its programmes
throughout the country with a radio networking. With the introduction of Radio
Paging Service, FM transmitter has become the landmark of AIR.
Today, All India Radio counts among the few largest broadcasting networks
in the world to serve the mass communication needs of the pluralistic population
of India. The network has expanded gradually, imbibing new technologies and
programme production techniques.
3-TIER BROADCASTING: All India Radio has evolved a three-tier system of broadcasting, namely, national,
regional and local. It caters to the information; education and entertainment
needs of the people through its various stations spread over the length and
breadth of the country. They provide news, music, talks and other programmes in
24 languages and 146 dialects to almost the entire population of the country.
The regional and sub-regional stations located in different states form the
middle tier of broadcasting. Local radio and community radio is a comparatively
new concept of broadcasting in India. Each of the stations serving a small area
provides utility services and reaches right into the heart of the community, which
uses the radio to reflect and enrich its life.
NEW SERVICES: "This is all India Radio. The News, read by...." These words ring all over the
country every hour, day and night, broadcasting news bulletins in Hindi, English
and 17 regional languages.
The bulk of AIR news comes from its own correspondents spread all over
the country. It has 90 regular correspondents in India and has seven special
correspondents/reporters and two hundred and forty six part-time correspondents
stationed in different countries.
ROLE OF ELECTRONIC MEDIA: In a democracy, the role of electronic media is not confined to provide
information, education and entertainment. It has to play a greater role. It has to
promote citizens right to information. Further to secure the citizen's civil, political
and social rights. It also has also to act as a public watchdog to reveal state
abuses.
Public Communication System has been recognized as a public sphere,
where widespread debate and discussion can take place. This will provide people
information necessary to make informed decisions, and facilitate the formation of
public opinion and can thus enable the citizens to shape the conduct of
government by articulating their views.
Role of electronic media, both radio and television is to be conceived in
terms of representing adequately different social interests also. They have to give
adequate expression to the full range of cultural-political values in society.
A UNESCO study has also highlighted the role of the media in socialization,
cultural promotion and national integration for creating better understanding and
appreciation of others viewpoints and aspirations. Media can help to democratize
the relationship between government and governed.
1.2.4 REACH OF RADIO AND TELEVISION: REACH OF RADIO: All India Radio and Doordarshan are now part of the Prasar Bharati - the
autonomous broadcasting corporation of India through an Act of Parliament in
1990. The Prasar Bharati Board took charge of the administration of All India
Radio and Doordarshan with effect from 23rd November 1997.
All India Radio presently has more than 200 Radio Stations including 183
full-fledged stations and nine relay centers and three exclusive Vividh Bharati
Commercial Centers.
In all AIR has 310 transmitters and provides radio coverage to a population
of 97.3 per cent spread over 90 per cent area of the country.
The External Services Division of All India Radio is a vital link between
India and rest of the world, broadcasting in 25 languages. Of these 16 are
foreign and 9 are Indian languages.
The National Channel of All India Radio came on air on 18th May 1998.
This Channel works as a night service from 6.50 p.m. to 6.10 a.m. everyday,
covering 64% area and almost 76% population.
REACH OF DOORDARSHAN: Compared to Radio, Doordarshan's network expansion is impressive in shortest
time possible. In March 1999, Doordarshan -1 had 1000 transmitters and DD-2
(the Metro channel) had 57 covering about 87.9 per cent of population and about
74.8 per cent of area.
As on March 2006
1. Transmitters for DD-1 1050 (High, Low and very
Low Power transmitters)
2. Transmitters for DD-2 67 (High, Low and very Low
power transmitters).
3. Other Transmitters 3 (2 at the Parliament &
one at Srinagar
1.2.5 FUTURE OF RADIO AND TELEVISION: In a developing country like ours, a special function of broadcasting should be the
coverage of development, its significance, achievements and problems. People's
participation in development activities should be highlighted as also significant
work being done by voluntary agencies. The style and methods of news reporting
should reinforce the fundamental principles on which national policies are based.
The primary purpose of the current affairs programmes should be to
enlighten the people on various aspects of political, economic, social and cultural
developments.
FM and Privatization of Radio: In recent years two very important developments have taken place in the field of
radio and television broadcasting in India. With the advent of television it
appeared that the importance of radio had gradually diminished. This actually
happened for some years and radio ownership and radio listenership decreased
considerably.
But it seems that radio is reappearing once again in the form of FM
transmission. The FM transmission stations are working as local stations catering
to the local needs of the listeners. The partial privatization of FM broadcasting
has also made the radio an important medium of mass communication.
The programmes broadcast on FM are becoming very popular with the
urban youth as the programmes cater specifically to them. Moreover, FM
broadcasts are also becoming popular in cars and other vehicles. They provide
necessary information regarding the roadblocks, traffic, and weather etc. to the
motorists. FM broadcasting has gained a lot of popularity in last few years.
Private television channels:
The second but perhaps the most important development that has revolutionized
not only the media system in India but the entire society has undergone a
dramatic change is the availability of multiple channels on television - either
direct through satellite or through cable TV.
Doordarshan itself is a multi channel system having a separate a sports
channel and a separate educational channel (Vidya Vahini) on the anvil.
But the sea change has occurred because of what is called "sky invasion".
This term refers to the invasion of the households by private channels both Indian
and foreign. The speed with which the private channels have expanded in India
is an example in itself. The important point here is that this expansion has
occurred in spite of and despite the government. The Indian government never
wanted to provide up-linking facilities perhaps being afraid of the cultural
invasion. But channels, including Indian channels, started up-linking from foreign
soils like Kathmandu and Hong Kong and no technology available today can
afford to block the down linking.
This "sky invasion" coupled with rapid expansion of cable network has
actually converted the entire urban and semi urban India into a big global village.
The number of television owing household has also increased tremendously and
it is estimated that about 70% of the urban households and 50% of the rural
households today own at least one television set.
This has to be noted and appreciated and also critically examined as this
has happened in a record time unlike the Western countries where it took about
20 years. The Indian society has in fact leap-froged at least in the field of
television usage.
1.3 SUMMARY: o Extraordinary information explosion have dramatically shrunk time and
distance The new advancements have converted our world into a Global Village. Electronic media have transformed communication and our ability to
share, store and gain information and knowledge. The widely available media
services are changing the ways in which we live and work and also altering
our perceptions and beliefs.
o Marconi started radio broadcasting in 1896 with the invention of first wireless telegraph link. It took ten years since then for the first demonstration of radio
broadcasting to establish but it was hard to distinguish words from music. One
successful demonstration took place from the Eiffel Tower in Paris in 1908. A
New York Station transmitted the first radio news bulletin in 1916 on the
occasion of the election of US President. By 1927, broadcasting services were
started as a major medium of information.
o Radio broadcasting in India began as a private venture in 1923 and 1924, when three radio clubs were established in Bombay, Calcutta and Madras
(now Chennai). The Radio Club broadcast the first radio programme in India in
June 1923. The daily broadcasts of 2 to 3 hours consisted mainly of music and
talks. These stations had to close down in 1927 for lack of sufficient financial
support.
o Television began in India way back in 1959 as a part of All India Radio when it was formally commissioned on September 15 as an experimental service. Its
aim was to promote social education and general awareness. It was not until
Smt. Indira Gandhi was in charge of the Information and Broadcasting Ministry
that television was commissioned as a regular daily service from 15th August
1965. Now television transmitters carry Doordarshan signals to almost three
fourth of the country's population.
o The programmes broadcast on FM are becoming very popular with the urban youth as the programmes cater specifically to them. Moreover, FM broadcasts
are also becoming popular in cars and other vehicles. They provide necessary
information regarding the roadblocks, traffic, and weather etc. to the motorists.
FM broadcasting has gained a lot of popularity in last few years.
o This "sky invasion" coupled with rapid expansion of cable network has actually converted the entire urban and semi urban India into a big global village. The
number of television owing household has also increased tremendously and it
is estimated that about 70% of the urban households and 50% of the rural
households today own at least one television set.
1.4 KEY WORDS: Global Village: With increased connectivity, in terms of transportation and more importantly in the field of communication technologies, the barriers of time and space are shrinking. This
way the world now is a well-connected place. Thus the world is called a Global Village.
Marshal McLuhan gave this concept.
Radio Club: In the beginning, radio broadcasting started as a hobby or amateur activity. The very first such radio broadcasts were by amateur radio clubs. The radio clubs of the early
days were taken over by professional radio organizations later.
Signature Tune: Every programme on radio and TV starts with a distinctive piece of music. That piece of music often becomes the identity symbol of the programme. This tune is called
signature tune.
SITE: In the mid-seventies, a very large study was conducted in five states of India.to find out the efficacy of TV as a mass medium. This study, Satellite Instructional Television
Experiment is popularly known as SITE.
1.5 SELF-ASSESSMENT QUESTIONS (SAQs): 5. Discuss in detail the history of radio in India. Give suitable examples.
5. Discuss in detail the history of television in India. Give suitable examples.
5. Discuss in detail the reach and role of radio in India. Give suitable examples.
5. Discuss in detail the reach and role of television in India. Give suitable examples.
5. Discuss in detail the present scenario of radio in India. Give suitable examples.
5. Discuss in detail the present scenario of television in India. Give suitable examples.
0.5 REFERENCES / SUGGESTED READINGS:
o Many Voices, One World (Report by the International Commission for the Study of Communication Problems).
o The Story of News Services Division, All India Radio. o Ministry of I & B, Annual Report 2005-2006. o Keith, Michael C & Krause, Joseph M. (1989) The Radio Station published
by Focal Press, Boston, London. o Chatterji, P.C. (1993) Indian Broadcasting. o Dilliard (190) Television Journalism and Broadcasting. o Bhatt, S.C. (1995) Broadcast Journalism.
M. A. Mass Communication (1st year) / PGDMC ELECTRONIC MEDIA MMC 104 / PGDMC 104 Lesson: 2
RADIO PRODUCTION Writer: Sh. Sushil K. Singh Senior Lecturer, Dept. of C M & T, GJUST, Hisar, (Haryana)
Vetter: Prof. B. K. Kuthiala Dept of Mass Communication, Kurukshetra University, Kurukshetra. Converted in to SIM format by: Sh. Rahul Kapil Associate Producer, ZEE News, New Delhi LESSON STRUCTURE: In this lesson, we shall discuss the basics of radio production. We shall start with radio
production formats. Then we shall focus on basic equipments for radio production, stages of
radio programme production, and the different types of radio programmes. We shall also
briefly discuss about writing for radio. The lesson structure shall be as follows:
2.0 Objectives
2.1 Introduction
2.2 Presentation of Content
2.2.1 Radio Production Formats
2.2.2 Equipments for Radio Production
2.2.3 Stages of Radio Programme Production
2.2.4 Types of Radio Programmes
2.2.5 Writing for Radio
2.3 Summary
2.4 Key Words
2.5 Self-Assessment-Questions (SAQs)
2.6 References/Suggested Reading
2.0 OBJECTIVES: The objectives of this lesson are as follows:
To study about the various radio production formats To study about equipments for radio production,
To study about stages of radio programme production, To study about types of radio programmes, To study about writing for radio.
2.1 INTRODUCTION: Electronic media of communication bring into our homes audio and video signals in the form
of various programmes. These programmes, which come on air as sound or both picture and
sound, are either live or are already recorded or shot, processed, and transmitted. Electronic
media viz. television, radio, and film (or motion picture) share the following attributes:
o Immediacy: These media can present topical, contemporary material live to the audience immediately.
o Impermanence: Programmes brought by these media are perishable images and sounds.
o Diversity: They bring a variety of programme material, which appeals a wide range of audiences.
o Flexibility: Material can be recorded edited, and duplicated for multiple playbacks.
In this lesson, we shall discuss about the basic aspects of radio programme
production.
2.2 PRESENTATION OF CONTENT: The content of this lesson shall be presented as follows:
o Radio production formats o Equipments for radio production o Stages of radio programme production o Types of radio programmes o Writing for radio
2.2.1 RADIO PRODUCTION FORMATS: Many radio programmes are live. Some programmes on radio are recorded first
and broadcast later. Some programmes are studio based, while others are
recorded on outside locations. Here we shall discuss about a few different
varieties of radio production formats:
LIVE OR RECORDED RADIO PROGRAMMES: The programmes on radio and television can be live, pre-recorded or a combination of both. The nature of production calls
for whether a programme will be produced live or recorded in advance and used
later.
Live production involves the risk of production errors, as there are no
"second chances". It has to be right the first time, which is the only time.
However, live production is cheaper than recorded production techniques and
sometimes easier and quicker.
Recorded productions allow supervision and control over quality. In this
method, first recording of programmes is done. Editing and postproduction are
done at a later time. This is an attempt at enhancement to further refine
production value and quality while shooting. This can also combine with live
production method. Portions or segments of a programme can be recorded,
edited, and processed in advance and incorporated into a studio production using
live talent.
STUDIO OR REMOTE (OUTSIDE ON LOCATION): Programmes can be produced with in the controlled environment of an indoor studio, which offers the required settings
of a programme. Studio settings offer personnel control, light control, temperature
control, sufficient power supply, and access to supplementary production
personnel, equipment accessories and spare parts, and even telephones and
change rooms.
Production can also be done at a temporary remote location. A unique
setting can be achieved by thoughtful selection, planning and full use of a remote
outside location. The realism and detail required for the quality and success of a
production can also be obtained. However, in such a situation some production
requirements, such as extensive lighting or elaborate sets are eliminated.
A combination of studio and remote production is also possible. Most
newscasts combine anchors in the studio with reporters in the field. The anchor
introduces a story from the studio and the reporter provides the details from the
field.
OTHER PRODUCTION FORMATS: Audio production can be carried out in many ways depending on the types and
source of programmes. Local live production employs station's own announcers
or newscasters locally and play records and tapes, which they themselves own.
Live-assist production is one way where stations retain local announcers and disc
jockeys as the backbone of the programme and uses syndicated programming,
such as reels of taped (prerecorded) music and satellite delivered music services.
In semi automation production a local radio station relies on the services of
the syndicated programme producer. The music is typically played on large tape
machines. When a break point for a programme announcement is reached,
smaller cartridge tape machines are triggered to play by a sub audible cue tone
on the master tape.
Turnkey automation refers to fully automated radio stations, which consists
largely of a satellite dish and a control board. The satellite disk downlinks radio
programmes. The services may also be localized such that new information is
telephoned to the programme producer in time for the announcers many miles
away to prepare the inserts.
2.2.2 EQUIPMENT FOR RADIO PROGRAMME PRODUCTION: The basic equipment to produce audio programme include the following:
o The studio desk (mixer console or control board or control panel) o Microphones o Turntable o Compact Discs and Records o Audiotapes o Music and Sound effects.
THE CONSOLE: The control board or console processes the sounds and voices during recording, editing, and dubbing. This mixes together the various programme sources to form
the broadcast output. This is located in the central control point or control room. Three types
of circuit functions are operated.
Programme circuits: A series of channels, their individual volume levels
controlled by separate rotary faders.
Monitoring circuits: Visual (meter) and aural (headphone) means of measuring
the individual sources or channels as well as the final mixed output.
Control circuits: Provision of communication with studio or outside by means of
"talk back" or telephone line.
MICROPHONE: A microphone (mics, pronounced myke) is a transducer, which converts acoustic energy into electrical energy. Several types of microphones are
available with audio pickup pattern characteristics designed to meet various
recording requirements and situations. The directional property of microphones,
which is also called the pickup pattern, is important for selecting the right kind of
microphone. According to the pickup patterns, microphones can be classified as:
o Unidirectional microphones are appropriate for one or two people speaking side by side. Background noise is undesirable. These are also called cardioid mics because of their heart-shaped
pick-up pattern.
o Bi-directional microphones are used when two people directly facing each other. o Omni-directional microphones are used for picking up a large number of
people and are excellent for gathering background noise.
Stereo recording requires specially designed stereo microphones. It can also be
achieved by using at least two microphones. One such approach is M-S (mid-
side) miking. A bi-directional microphone picks up sound to the left and right and
a super cardioid microphone picks up sound to the front. The output of both
microphones is fed through a complicated circuit. X-Y miking is another method
of stereo recording. Two cardioid microphones are placed next to each other.
One angles to the left at a 45-degree angle and other to the right at 45 degree.
This way both the microphones pick up sound from the center.
TURNTABLE: A turntable picks up information recorded on a disc or record and sends this information to the console for amplification, mixing, processing, and
integration with other sound elements.
COMPACT DISCS AND RECORDS: Vinyl records or LPs are being replaced by high quality digital recordings made on compact disc. In playing a disc, most control
desks have a "pre-fade", "pre-hear" or "audition" facility which enables the
operator to listen to the track and adjust its volume before setting it up to play on
the air. With a record, a glance at the grooves will often be sufficient to indicate
whether there is a wide variation in dynamic range.
AUDIOTAPE: Sounds can be recorded in the field or in the studio onto audiotape at standard speeds. The audiotape used in studio may be in the form of continuous
loop cartridges, or carts, or materials may be recorded on reel-to-reel audiotape
machines. Digital Audio Tapes (DAT) record the signal in digital form in which the
original electrical variations are represented by a series of pulses or bits of
information.
MUSIC AND SOUND EFFECTS: Music and sound effects may be produced and recorded in CD or audio tape and may also be prerecorded on disc or audio tape
and integrated into the programme material using the console or control board.
Voice Terms: The terminology used for production describes the placement 9place of origin of voice) and quality of voices. The voices are indicated using
easily understood designations, for instance, Voice 1, characters name or
Announcer # 1.
o On mic (on mike): A voice or character is heard at a normal distance from a microphone.
o Off Mic: When we want the voice to be heard as though coming from a distance or from the back of a room we use this term.
o Fading on or fades on: We write this when we want the voice to sound as though is approaching the centre of action in the minds eye of the listener.
Fade off or fading off could indicate the reverse process, where the voice
starts at a normal distance from the microphone and then slowly moves away.
o Reverb: is written to create suspense or heighten a mysterious mood when we want the voice to be heard with a slight echo or reverberation. It is normally
written after the talents designation. To create the illusion of a telephone
conversation, the notations "filtered a "behind barrier" can be used, or simply
indicated as heard through a telephone,
o SFX: The common abbreviation for sound effects is "SFX". For sound effects indicate both the source and the nature of the material, for instances "CART:
MUSIC UP FULL FOR FIVE SECONDS AND THEN UNDER". Music under or
sneak under is used when the music or the sound effect is heard in the
"background" (bg.) and then is heard at full volume after a character finishes a
particular word.
o Segue: We write, "segue" where one selection ends and the next selection begins immediately. We write "Cross fade" when one selection gradually
fades out and the next selection gradually fades in.
o Ad lib: Sometimes audio scripts include "ad lib", which allows character or voices momentarily to create their own words keeping with the general tune,
mood and purpose of the script.
2.2.3 STAGES OF RADIO PROGRAMME PRODUCTION: Radio productions are planned in three stages.
PRE-PRODUCTION: This is the planning and development stage. This begins with the generation of a
script. Unless a script is developed it is difficult and there will be confusion on
what type of programme you are producing. The script contains instructions and
guidelines for the production of the programme.
PRODUCTION: The second stage is production. All the material for the programme is recorded or organized at this stage. Selecting and positioning of the
microphones, the type of tapes to be used, and selection of various sources of
sound through the mixer are all part of this stage.
POSTPRODUCTION: This stage generally includes editing. Sounds recorded during production and dubbing if required, are the principal focus of postproduction.
Putting together the previously recorded sound and selection of sound are
important. The purpose of editing can be summarized as:
o To arrange recorded material into a more logical sequence. o To remove the uninteresting, repetitive, or technically acceptable portion. o To compress the material in time. o For creative effect to produce new juxtaposition of speech, music, sound and
even silence.
2.2.4 WRITING FOR RADIO: We know that script is the backbone of production. So writing is an essential part
of it. We write what type of sound would be required at a given situation and what
would follow. Sound is the entire means of communication in radio. Sounds help
create and enhance mental images.
Sounds have the unique capability of creating an environment for the
listener. Through the creative use of various writing and production techniques,
entire worlds can be created in the human mind. Many techniques are availed to
create an environment with sound.
o Language: The primary goal of language is to communicate ideas and information to be easily understood. The selection and using words and the
combining of words into meaningful sentences are important for good
production.
o Words: Words are the primary tools for the expression of thoughts, ideas, and emotions, regardless of the medium. Words have meaning and power. Words
need to be selected carefully. Use words that comes close to reality. Informal,
rather than formal words are preferred.
o Sentences: Sentences are the principal units of organised thought. The keys to construct effective sentences are clarity, simplicity, conversational style and
conciseness.
2.2.5 DIFFERENT RADIO PROGRAMMES: NEWS AND SPORTS: Newscasts and sportscasts represent a station or network's largest daily
commitment of time, effort, personnel and facilities. Several steps are followed to
develop news stories.
o The idea for a story is suggested by a reporter, o The idea in evaluated. o The logistics governing the story are identified and finalized. o The story is produced into finished form.
The process of writing and structuring the first version of story should include the
following:
o Reading the source material carefully and thoughtfully. What is newsworthy? What is the essence of the story? What impact it might have on the audience?
o Highlighting the main points on the original source material. o Tell the story informally to a friend or a fellow newsroom reporter o Determine how the story can best be told. o Write the first draft. o Arrange the structure, lead, sentence pattern, ending, etc. o Check your copy against the original source. o Revise the copy
DOCUMENTARIES AND FEATURES: A documentary presents, facts, based on documentary evidence about a relevant
subject from real events, persons or places to reflect, interrelate, creatively
interpret or comment on current concerns and realities. The feature programme
on the other hand need not be wholly true in the factual sense. It may include folk
song, poetry & fictional drama to help illustrate its theme.
Reality is the basic requirement for a documentary. Documentaries may be
classified as information, interpretation, or persuasion according to the ultimate
objective. They may also be combined.
To develop a subject (idea) of a documentary the following process is
normally followed:
Information to
Knowledge to
Understanding to
Expression.
Some suggestions are given for the production of documentaries.
o Prepare as detailed an advance script as possible. o Divide programme elements into those that are under your control and those
that are not.
o Write narration involving the audience. o Provide narration that sounds natural and conversational. o Avoid long lists, unnecessary statistics, complex terms and jargons and
hackneyed expressions.
o Make narration clear, precise, and easy to understand. o Do not inundate the programme with too much narration. o Do not use narration when a sound will communicate the information or mood
more meaningfully.
TALK PROGRAMMES (INTERVIEWS):
The general programme category of public affairs includes the talk programmes,
interviews, newspaper programmes, and discussions. When regular broadcasting
began in the 1920s, among the first types of programmes to appear on radio
networks were those of featured interviews. The aim of an interview is to provide
facts, reasons, opinions in a particular topic in the interviewee's own words, so
that the listener can form a conclusion as to the validity of what the interviewee is
saying.
Electronic media interviews are done under a variety of circumstances - live
or recorded and edited for later use, in the studio, on the telephone, or on a
remote location in the field. Interviews can be divided into three types the
information interview, the opinion interview, and the personality interview.
What ever is the type of interview; the following methods of approaching
the task can be used.
8. The style of the interview
8. The wishes and comfort of the guest.
8. The time available for preparation.
8. The nature of the topic.
8. The interview policies of the station - some prefer the spontaneous,
unrehearsed method while other prefer more structural and predictable
interview situation.
2.3 SUMMARY: o Radio programmes can be live, pre-recorded or a combination of both. Live
production involves the risk of production errors, as there are no "second
chances". It has to be right the first which is the only time. However, live
production is cheaper than recorded production techniques and sometimes
easier and quicker. Recorded productions allow supervision and control over
quality. In this method, first recording of programmes is done.
o Studio settings offer personnel control, light control, temperature control, sufficient power supply, and access to supplementary production personnel,
equipment accessories and spare parts, and even telephones and change
rooms. Production can also be done at a temporary remote location. A unique
setting can be achieved by thoughtful selection, planning and full use of a
remote outside location.
o Local live production employs station's own announcers or newscasters locally and play records and tapes, which they themselves own. In semi automation
production a local radio station relies on the services of the syndicated
programme producer. Turnkey automation refers to fully automated radio
stations, which consists largely of a satellite dish and a control board.
o The Console is the central control board that processes the sounds and voices during recording, editing, and dubbing. This mixes together the various programme sources to
form the broadcast output. This is located in the production control room.
o A microphone converts acoustic energy into electrical energy. Several types of microphones are available with different audio pickup patterns. According to
the pickup patterns, microphones can be classified as: Unidirectional, Bi-
directional, and Omni-directional. 2.4 KEY WORDS: Live or Recorded Radio Programmes: Radio programmes can be live, pre-recorded or a combination of both. Live production involves the risk of production
errors, as there are no "second chances". It has to be right the first which is the
only time. However, live production is cheaper than recorded production
techniques and sometimes easier and quicker. Recorded productions allow
supervision and control over quality. In this method, first recording of
programmes is done. Editing and postproduction are done at a later time. Studio or Remote (outside on location): Studio settings offer personnel control, light control, temperature control, sufficient power supply, and access to
supplementary production personnel, equipment accessories and spare parts,
and even telephones and change rooms. Production can also be done at a
temporary remote location. A unique setting can be achieved by thoughtful
selection, planning and full use of a remote outside location. Basic Equipment Audio Programme Production: The basic equipment to produce audio programme include: The studio desk (mixer console or control
board or control panel), Microphones, Turntable, Compact Discs and Records,
and Audiotapes.
The Console: This is the central control board that processes the sounds and voices during recording, editing, and dubbing. This mixes together the various programme sources to form
the broadcast output. This is located in the production control room.
Microphone: A microphone converts acoustic energy into electrical energy. Several types of microphones are available with different audio pickup patterns.
Unidirectional Microphones: These are appropriate for one or two people speaking side by side. Background noise is undesirable. These are also called cardioids microphones because of their heart-shaped pick-up pattern. Bi-directional Microphones: These are used when two people directly facing each other. Omni-directional Microphones: These are used for picking up a large number of people and are excellent for gathering background noise.
Pre-production Stage: This stage involves planning and development for the programme. This begins with the generation of a script. Unless a script is
developed it is difficult and there will be confusion on what type of programme
you are producing. The script contains instructions and guidelines for the
production of the programme.
Production Stage: This is the second stage. All the material for the programme is recorded or organized at this stage. Selecting and positioning of the
microphones, the type of tapes to be used, and selection of various sources of
sound through the mixer are all part of this stage.
Postproduction Stage: This stage generally includes editing. Sounds recorded during production and dubbing if required, are the principal focus of
postproduction. Putting together the previously recorded sound and selection of
sound are important.
Editing: Editing involves: arranging recorded material into a more logical sequence; removing the uninteresting, repetitive, or technically acceptable portion; compressing the
material in time, etc. 2.5 SELF-ASSESSMENT QUESTIONS (SAQs):
0. Write a detailed note on radio programme production.
0. Discuss the equipment used for radio programme production.
0. What are the various formats of radio programme production? Discuss in detail.
2.6 REFERENCES / SUGGESTED READINGS: o Keith, Michael C & Krause, Joseph M. (1989) The Radio Station published by
Focal Press, Boston, London. o Chatterji, P.C. (1993) Indian Broadcasting. o Dilliard (190) Television Journalism and Broadcasting. o Bhatt, S.C. (1995) Broadcast Journalism.
M. A. Mass Communication (1st year) / PGDMC ELECTRONIC MEDIA MMC 104 / PGDMC 104 Lesson: 3
TELEVISION PROGRAMME PRODUCTION
Writer: Sh. Sushil K. Singh Senior Lecturer, Dept. of C M & T, GJUST, Hisar, (Haryana)
Vetter: Prof. B. K. Kuthiala Dept of Mass Communication, Kurukshetra University, Kurukshetra. Converted in to SIM format by: Sh. Rahul Kapil Associate Producer, ZEE News, New Delhi LESSON STRUCTURE: In this lesson, we shall discuss the basics of television programme production. We shall start
with an introduction to television programme production. Then we shall focus on the stages
of television programme production, and the different types of video formats. We shall also
discuss about the terminology used in television production. The lesson structure shall be as
follows:
3.0 Objectives
3.1 Introduction
3.2 Presentation of Content
3.2.1 Television Production: An Introduction
3.2.2 Phases of Television Production
3.2.3 Pre Production
3.2.4 Production
3.2.5 Postproduction
3.2.6 Video Formats
3.2.7 Terminology used in Television Production
3.3 Summary
3.4 Key Words
3.5 Self-Assessment-Questions (SAQs)
3.6 References/Suggested Reading
3.0 OBJECTIVES: The objectives of this lesson are as follows:
To get an Introduction to Television Production To study about the Phases of Television Production, To study about the Pre Production Stage, To study about the Production Stage, To study about the Postproduction Stage, To know about some Video Formats, and To Know Some Terminology Used in Television Production.
3.1 INTRODUCTION As an electronic medium, radio has many advantages over the others. Radio can
be differentiated from other media in having the following characteristics:
o Production costs are less than in most other media. o The profile and size of the audience are relatively stable. o Radio is a portable medium and is carried where the listener goes. o It is a friendly, personal medium but not conducive to detailed information. o A "Theater of Mind" can be created using sound only. However, radio has
to compete with listeners inattention.
o It does not respect territorial limits. Its potential for communication is very great but the actual effect may be quite small.
The all-powerful television has the potential for the combination of sight, sound,
motion and colours, which offer exciting creative possibilities. In this medium
special effects, animation, slow motion picture, etc., are accomplished easily and
effectively. Production tends to be complex with sophisticated equipment and
technical crews working as a team to produce the finished product.
For long, television and film have had an antagonistic relationship and tried
to ignore each other. Television was produced live and was not interested in
showing movies. The film industry considered TV as both aesthetically and
technically inferior. Many in the film world considered TV as a visual form of
radio. How ever technological developments in both the fields have brought
together the two hostile media and both are now intertwined.
Thanks to the invention of videotape recorder in 1956, which facilitated
production of high quality image in the field. Video editing became more
sophisticated, which enabled electronic editing faster and easier than film editing.
New interface technologies have been developed and transfer of image from TV
to film or vice versa are easily carried out.
A growing trend is that programmes are shot in film and the editing is done
in videotape. Computer animation, another technological advancement, is
extensively used by both film and television. A combination of all the three has
started producing seamless effect of elaborate and sophisticated pictures.
3.2 PRESENTATION OF CONTENT: The content of this lesson shall be presented as follows:
o Television Production: An Introduction o Phases of Television Production, o Pre Production Stage, o Production Stage, o Postproduction Stage, o Video Formats, and o Terminology Used in Television Production
3.2.1 TELEVISION PRODUCTION- AN INTRODUCTION: The word television means "to a see at a distance". In TV broadcasting system,
the visual information is recorded and converted in to an electric signal, which is
transmitted to the receiver. At the receiving end, the video signal is converted
back in to the images on the screen of the picture tube (TV set).
Much similar to radio broadcasting, television originally was conceived as
another method of broadcasting entertainment and news programmes but with
pictures. Commercial broadcasting turned out to be the largest field in the
application of television.
The ability to reproduce pictures, text material, graphics, and visual
information has become so useful that we can watch a programme from a foreign
country relayed by satellite or play back a video cassette recorder (VCR), or a
video game can be connected to the TV receiver.
3.2.2 STAGES OF TELEVISION PROGRAMME PRODUCTION: Essentially the production of television programmes encompasses three basic
stages or phases. These are:
o Pre-production,
o Production, and o Post production.
These phases may also be called as: planning, shooting or recording, and
editing.
Pre-production is the stage of development and planning that is executed
before the actual shooting phase of production. Pre-production begins with the
generation of a script without which developing a budget, hiring the crew,
planning a shooting schedule, selecting locations are almost impossible.
All the material for the programme is shot in the production stage. Shooting
is done as envisaged in the production script. The scenes and shots required for
the programme are recorded or obtained at this stage. The various shots are
joined in a logical, pleasing and meaningful order during postproduction. Each
phase is crucial to the phase that follows. Inadequate pre production almost
guarantees a poor production, and a poor production is seldom "saved" or
improved upon in the postproduction.
The principal focus of postproduction is editing the images and sounds
recorded during production. The phase involves giving finishing touches to the
images, sound and special effects. Dialogue that may have been poorly recorded
during production may need to be rerecorded or dubbed. If the script calls for
voice-over narration or stock footage to complete a particular sequence, these
are handled during postproduction.
Eventually, a version of the programme that contains picture, dialogue,
music, sound, special effects, and any other necessary elements is put into the
final form, which can now be submitted for transmission.
Each of these phases is explained in detail in this lesson.
3.2.3 PREPRODUCTION STAGE: SCRIPT WRITING: The Concept: Also called the idea, premise, or synopsis, a script is a written account describing the basic idea of the programme story. It presents a thumbnail
sketch of the story and is often used to provide the producer or the director with a
quick means of evaluating the overall scope of the programme story. The
argument for beginning the productions with a brief story idea is that if a short
concept can't catch interest, it hardly makes sense to develop that idea into a
full-length script.
Example of concept (TV serial Hum Log)
The average lower middle class family is under grate strain of the forces of
modernization. Parents and children live under profound generation gap.
The society needs to be shown a mirror, thereby making these people
aware and conscious of certain problems. At the same time there has to be
an attempt to provide options for behaviour and resolution of conflicts.
People need some guidelines and what can be better than telecasting an
entertaining serial on television.
The Scene Outline: The scene outline is a list in numerical order of all the scenes without dialogues or elaborate descriptions. It is an excellent tool for
listing the plot, which is not necessarily the same thing as the story.
The Treatment: The treatment is a prose description of the story. It reads like a story, describing the action in detail and provides the kind of visual imagery. It
gives the first indications of where dialogues will be needed and builds on and
amplifies the characters, action and motivation suggested in the outline. The
treatment is one of the most important stages in script writing.
The Master Scene Script: The master scene script is the translation of the treatment into script form. Using the treatment as a guide, a master scene script
creates a heading for each scene (for examples, INTERIOR OF THE CENTRAL
HALL - AFTERNOON).
The Shooting Script: The shooting script is the final stage of script writing. The shooting script is usually the director's responsibility. The shots in the shooting
script are numbered consecutively. In addition to the scene headings, descriptive
material, and dialogue from the master scene script, the shooting script provides
specific instructions about camera angles, positions, and movements. The
shooting script also contains information about the transitions between shots or
scenes.
Some directors supplement the shooting script with drawings called
storyboards. These are diagrams of the main scenes and tell the entire story in a
visual format on paper. Storyboards depict the scenes and also indicate the
camera positions.
The Budget: Within the professional world the budget is the governing force of all productions. Estimations of what the programme will cost must be accurate.
Although the size of the budget can affect the script, the usual procedure is for
the budget to be derived from the script.
3.2.4 PRODUCTION STAGE: PRODUCTION PERSONNEL: Producer: The producer assumes responsibility for the entire television production. Depending on the type of production and facility involved, these
responsibilities are combined with those of the director, the writer, or both.
The Director: The director coordinates the efforts of the technical crewmembers and the performance of the television talent. The director executes the production
designed by the producer and conceptualized by the writer.
The Writer: Basically, the writer conceptualizes and formulates the essential television elements into proper script to accomplish specific objectives.
3.2.5 POST PRODUCTION STAGE: The need for editing was apparent, even in the early days of the movie image. At
first it was done by turning the camera off after one shot, then repositioning and
turning it back on for the next shot. The film was processed and then projected
with all the scenes in the same order in which they had been shot. Real editing
began when they turned the camera off and on several times in one reel,
processed the film, and then cut the shots apart and glued material back together
in a shorter form or different order. Then video editing started. It too began with
physical cutting and splicing of tape.
On-line and Off-line Editing: On-line editing is analogous to cutting the film negative whereas off-line editing has been akin to film editing that uses work
prints.
Right after tapes are shot, they are dubbed to work print tapes that are then
used to make all the editing decision. The work prints are viewed in order to
determine the edit-in point and edit-out point. When the points are marked, their
time code numbers will be stored in the computer which keeps track of all the
changes in what is called an edit decision list (EDL).
Linear and Nonlinear Editing: Originally, all video editing consisted of recording shots one after another from the beginning of the programme to the end in a
linear fashion. If someone finished editing an entire production and then decided
that the second edit should be two seconds shorter, there was no easy way to fix
the problem. This process also suffers from generation loss because signal
information is lost or contaminated when material is dubbed from one analog tape
to another.
Computer based nonlinear electronic editing was developed in the mid
1980s. It is also known as random access editing. On a computer if your decide
to more a paragraph from page 2 to page 152 from a word processing
programme, a few key strokes will accomplish the task. Similarly, in nonlinear
editing scenes can be trimmed and moved quickly and easily.
Cuts only Linear Editing: A cut only system is the most basic and the simplest editing system, which can butt one video image and its dialogue against another.
It cannot execute wipes and dissolves since it cannot show two pictures at a time.
Control Track Editing: This process involves using the video control track. An operator uses the controller to mark the edit-in and the edit-out points on the
tape. Then the controller backs up both machines an equal amount so that they
run at same speeds, running frames in sync, counts control pulses to the edit-in
points, and then starts the edit.
Time Code Editing: Time code is a digital numerical address that includes the hour, minute, second and also the number for each frame. Time code can be
recorded on a linear audio track, which is referred to a s longitudinal time code
(LTC). The item code can also be placed in the vertical interval, which is referred
to as vertical interval time code (VITC). This is the retrace area where the scanning stops at the bottom of the
frame and returns to the top of the frame. Drop-frame time code is a more
advanced system and corrects the error accumulated in LTC and VITC. This
system corrects the time code frame counter by systematically dropping just
enough frames to match the clock time and the time code address numbers.
EDITING EQUIPMENT: Cuts-only video editing involves two video tape recorders, one or two monitors,
and an edit controller. One videotape recorder, called the source deck, contains
the original camera footage that is to be rerecorded. The other recorder, called
the edit deck, is the machine an to which selected materials from the source deck
are edited. One monitor shows the output of the source deck; the other shows the
output of the edit deck. The edit controller is used to mark the editing points and
cue the decks to execute the editing decisions.
Advanced editing can be achieved by incorporating other equipment like the
switcher, which can generate transitions. The A-B roll uses two sources to supply
one edit machine, special effects generator (SEG), and character generator (CG),
which can generate graphics.
Desktop computer assisted editing has changed the world of editing. One
advantage of using desktop computer for editing is that the same computer can
be used for graphic programmes, special effects, audio, shot logging and other
production process. This makes postproduction more of a "one stop" process that
is less time consuming than postproduction has been in the past.
3.2.6 VIDEO FORMATS: The production begins with the video camera and recorder. Here you need to
know the video camera and recorder (or camcorder), camera mounting equipment
and lenses. Different video formats are also studied.
FORMATS: Ampex, in 1950s, used a tape that was 2 inches wide. Portable configurations
came only in the 1970s with the introduction of U-matic, which consisted of a
camera and separate videocassette recorder that used a 3/4-inch tape.
Two 1/2 inch formats introduced two years later by Sony's Betamax and
JVC's VHS were not compatible with U-matic due to the difference in tape size;
they also were not compatible to each other because the way the tape wound
around the recording heads, and the speeds were different.
In the early 1980's came camcorder system-a combination of the camera
and the video tape recorder. Sony's Beta-cam and JVC's and Panasonic's M-
format though used 1/2 inch tapes were not compatible again. Video-8 introduced
by Sony used a tape that was 8 mm wide (about 1/4 inch) became the most
portable format.
The formats that came in the 1980s were improved and yielded to new
equipment: U-matic SP, Super VHS ((S-VHS), Beta-cam SP, MH-II and Hi-8.
All the formats mentioned above are designed on the analog technology.
The latest developments are digital video recorders which give much better
results.
LENSES: Lenses gather light reflected by a subject and concentrate it on the imaging
device. Most lenses on TV cameras and camcorders are zoom lenses (more
properly called variable focal length lenses). Other lenses, called fixed lenses (or
prime lenses) are capable of capturing visuals only one distance. Lenses, which
show shots that appear to be magnified, are called telephoto lenses. Those that
show views roughly as the eye sees them a normal lenses. Those with a view
wider than the human eyes are called wide-angle lenses.
DEPTH OF FIELD: Viewers attention within the frame can be directed by manipulating the depth of
field. A shallow depth of field (a shallow focus) isolates a subject in one plane
and throws all other out of focus. A large depth of field allows the viewers eyes to
roam throughout every plane of action.
LIGHT AND FILTERS: Light is the key to recording an image on videotape. To obtain the correct
exposure the amount of light reaching the electronic imaging device is controlled;
too much light will result in an overexposed image; too little light to an under
exposed image. A light meter is used to measure the amount of light falling on or
reflected by the subject.
Light meters may be 'incident light meters' that measure the amount of light
falling in a particular talent or area of the set; 'reflected light meters' measure the
amount of light reflected by the subject, providing on overall light reading for the
entire scene. Best feature of light can be obtained by using a combination of both
reflected and incident light meters.
THE COLOUR OF LIGHT: In making quality images you need to know the colour of light. Electromagnetic
energy is measured according to wavelengths. Our eyes see different
wavelengths as different colours. A colour temperature scale was developed to
provide a precise and accurate measurement of different colours of light. The
scale in measured in degree Kelvin (K). Human eyes have the ability to
compromise for large changes in the colour of light and still see quite
realistically. However, film and video cameras cannot do this. Therefore colour
correction filters are used for good colour quality of the production.
FILTER: Among the most common filters are neutral density filters which reduce the
intensity of the light reaching the imaging system without altering the colour of
the light in any way. A haze filter is useful for eliminating the bluish cast. The
ultraviolet (UV) filter eliminates the ultra violet rays. Diffusion filters have a
rippled surface or an extremely fine, netlike pattern that scatters (diffuses) the
light and creates a softer, less detailed image.
Fog filters break up the light like diffusion filters but scatter that light from
the bright picture areas into the shadow areas. Double fog filters produce a fog
effect but without reducing sharpness.
Basic lighting instruments: Shooting cannot be done in natural sunlight all the
time. So artificial lights are needed. Lighting instruments are classified by the
quality of the light they produce and how the light can be shaped and controlled
by the lighting instrument itself. A hard light has a narrow angle of illumination
and produce sharp, clearly defined shadows, whereas a soft light scatters the
light to create much wider angle of gentle diffused illumination.
Lights are also classified as spotlights or flood lights; spotlights illuminate
small concentrated areas while floodlights cast a diffused and even beam of light
over a fairly large area.
LIGHTING APPROACH: The basic three-point lighting uses a key light, fill light and back light. The
primary source is the key light, It illuminates the subject. Then there is the fill
light. It fills in the shadows created by the key light. Backlight is placed above
and behind the subject at enough of an angle to keep the light from coming
directly into the camera lens. The backlight helps to outline the subject and
separate it from the background.
Additional lights sometimes referred to as separation lights amplify or
enhance the three-point lighting. They are: eye light which is placed near the
camera to add sparkle to a persons eyes, a background light that illuminates the
background.
SOUND IN TV PRODUCTION: Sound is also an essential element and should be given much thought and care.
Sound has a number of characteristics that are important to understand in order
to select the right audio equipment and record properly.
PITCH AND FREQUENCY: Sound waves travel in well-defined cycles. Frequency is the number of times per second that the wave travels from the beginning of one
cycle to the beginning of the next, and is measured in hertz (Hz). The sound
made by differing frequencies is the pitch. Each microphone and tape recorder
has its own frequency response, the range of the frequencies that it will pick up.
Microphones and recorders may not pickup all frequencies equally well. As a
result equipment of varying ability to pickup various frequencies with a graph
called a frequency curve are used.
LOUDNESS AND AMPLITUDE: Amplitude is related to loudness. As the amplitude increases, the sound will appear to become louder. Loudness is measured in
decibels (dB). A whisper is about 20dB, conversation about 55dB, and a rock
concert can get well above 100 dB. The threshold of pain starts at about 120dB.
The range of quietness to loudness is called dynamic range. If something is
recorded louder the system can handle, the result is distortion.
SIGNAL TO NOISE RATIO (S/N): Most electronic equipment has inherent noise built into it that comes from the various electronic components. One of the
specifications provided for equipment is its signal to noise ratio, usually
something like 55:1, which means that for every 55 dB of signal recorded 1 dB of
noise is present.
TIMBRE: Timbre deals with such characteristics as mellowness, fullness, sharpness and resonance. Harmonics and overtones contribute to the production
of timbre. A sound has one particular pitch, called a fundamental, but it has other
pitches that are exact multiples of the fundamental frequency (harmonics) and
pitches that may or may not be exact multiples (overtones). Timbre can vary for
different mics.
DURATION: Duration is the length of time a particular sound lasts. Duration has three parts: attack, sustain and decay. Attack is the amount of time it takes a
sound to get from silence to full volume; sustain is the amount of time the sound
is at full volume; decay is the amount of time it takes sound to go from full
loudness to silence.
VELOCITY: Velocity refers to the speed of sound. This speed is 750 miles per four, which is relatively slow. This can cause phase problems. If two microphones pick
up the same sound at slightly different times, they can create a signal that is out
of phase; one of the mics is receiving the sound when the wave is going up and
the other is receiving the sound when the wave is going down. The result is that
some or whole of the sound is cancelled, and little or nothing is heard. One way
to avoid this problem is the three to one rule. No two microphones should be
closer together than three times the distance between them and the subject.
MICROPHONES: Microphones are the instruments that collect the sound and convert it in to
electrical energy. In addition to differing in frequency response, dynamic range
and timbre producing qualities, microphones have particular characteristics that
relate to their directionality, construction, and positioning, etc.
DIRECTIONALITY: Directionality in a microphone involves its pickup pattern. A unidirectional mic is appropriate for one or two people speaking and the
background noise is undesirable. It is also called cardioid mic because of its
heart shaped pickup pattern. Other unidirectional mics in use are: super-cardioid,
hyper-cardioid and ultra-cardioid whose patterns are longer and narrower than
those of regular cardioid. Bi-directional mics are used when two people facing
each other directly. The sound is carried from both directions. Omni-directional
mics are best for picking up a large number of people and are excellent for
gathering background noise from all directions.
Stereo recording requires at least two mics or specially designed stereo
mics that have several different pickup elements within them. One approach to
stereo recording is M-S (mid-side) miking. This uses bi-directional and super-
cardioid mics; the bi-directional mic picks sound to the left and the right and the
super-cardioid mic picks up sound to the front. The output of both mics is fed
through a complicated circuit that makes use of their phase differences to
produce left and right channels.
Two cardioid mics are used placing next to each other in another method
called X-Y miking. One angles 45 degree to the left and the other angles to right
at 45 degrees. This way both mics pick up sound from the centre, and primarily
one mic or the other picks up sounds for each side. When the recording is played
back through stereo speakers, it yields left and right channels.
CONSTRUCTION: Based on construction, mics can be divided in two types. A dynamic mic uses a diaphragm magnet and coils of wire wrapped around a
magnet. The diaphragm moves in response to the pressure of sound and creates
a disturbance in the magnetic field that induces a small electrical current in the
coils of wire.
A condenser mic has an electronic component called a capacitor that
responds to sound. A diaphragm moving in response to sound waves changes the
capacitance at the back plate, which then creates a small electrical change.
POSITIONING OF MIKES: Boom is a device with a long pole with the mic on the end of it that positions the mic above the talents and is moved as each person
speaks. Sometimes they consist of a simple pole (called a fish pole), which have
a shock-mount on the end to isolate the mic from vibrations.
Stands like floor stand and table stands are also used to hold mics. Hidden
mics are not desirable if people in the scene move a great deal. Cameras also
have in built mics which are not appropriate as they are usually too far from the
talent to pick up their sound well. Very small microphones called lavalieres attach
to clothing.
Some microphones be they lavaliere or stand mics do not have cables.
They are called wireless mics. Shotgun mic has very long but narrow pick up
pattern, usually super, hyper, or ultra-cardioid. They are almost always covered
with windscreen.
RECORDERS: Sound travels from a microphone through cable and connectors to recording equipment, which stores it on either audio tape a videotape. The
videotape recorders and the audiotape recorder have the same function control
as most recorders-play, record, stop, pause, fast forward, rewind.
Most recorders have three audio heads erase, record and play. The erase
headlines up the iron particles in a straight manners that contain no audio
impulses. The record head rearranges the particles to form representation of the
sound. The play head picks up the sound recorded by the record head and
reproduces it.
High quality tape recorders have a VU (volume unit) meter, a devices that
shows how loudly the sound is being recorded. Equalization function enables you
to cut out or emphasize certain frequencies such as bass or treble. Some
recorders have automatic gain control (AGCs) in which the gain is automatically
adjusted so that recording is neither too soft nor too loud.
3.2.7 VISUAL TERMINOLOGY: Several terms describe what the camera sees and the perspective of the scene
offered to the viewer. The descriptions of the composition of a shot involves such
elements as the distance between the camera and the subject, the amount of the
subject shown, and the position or angle of the camera in relation to the subject.
But first we should know the following terms:
Shot: A shot begins when the camera starts running and ends when it stops. It may be short or long, require a complex camera movement, or be totally static. A
shot begins as the Director says roll camera and action and ends with the word cut. Scene: A scene is usually defined as any unified action occurring in a single time and place. It may be composed of a single shot but normally is made up of a
group of shots.
Sequence: A sequence is somewhat an arbitrary concept. It consists of a group of scenes linked together or unified by some common theme, time, idea, location
or action. A sequence conveys a message.
The basic shots: Establishing shot (ES) / full shot (FS) / cover shot (CS): The major area of action is to be seen. This type of shot helps establish or re-
establish the setting. Ex. the long shot of a building, play ground, the sea with
high tides, dark lane with no traffic.
Long shot (S): The widest possible view of the scene is to be shown. Defining long shot cannot be precise since a long shot may mean different things to
different directors, for example LS of a building may include all the building and
its surroundings or only a portion of the building. Showing the full height of the
talent with surroundings is a long shot.
Medium shot (MS): A smaller portion of the scene is to be shown than in a LS. In effect, a long shot comprises several medium shots. Showing the talent from
head to thigh is a medium shot.
Close-up (CU) / tight shot (TS): Generally a close-up isolates the subject such as a talent from the surroundings. A smaller portion of the scene is to be shown
than might be in a MS. Several close-ups make up a medium shot. Showing the
bust i.e., the head and part of the chest is a close up. But showing only the face
is a tight shot.
Some other terms are also used to indicate intermediate designations.
Common examples are 'medium long shot' (MLS), a camera shot showing more
than a MS but less than a LS; medium-close-up (MCU), an extremely-close-up
shot (ECU) shows only a small portion of a talent or object like the eyes of a girl
or the face of a watch.
A composition is also described according to the number of people in the
shot. A "two-shot" indicates that there are two people or items, a "three-shot"
includes three people or items, and so on. For example, you can write, "two-shot
of Rama and Hanuman".
Some subjective camera terms are also used in scripts.
Point of view (POV): The camera shows the viewer the scene from the subject's viewpoint. For example, write "POV" when you want the viewer to see out of a car
window, from the drivers perspective.
Over the shoulder (OS): The camera is placed behind the shoulder of one of the talents to show what or whom that talent sees.
Canted shot: Such a shot shows a scene or talent out of the normal horizontal and vertical orientation. This is done to emphasize distortion, disorientation, and
unreality. The canted shot can illustrate the effect of drunkenness, drug use or
severe head injury.
High angle / low angle: Here size and dimension can be emphasized. The camera could look down from a high angle on a person to stress his or her
diminutive size; you could write "high angle on Gulliver", which would show
Gulliver looking up into the camera lens, emphasizing his short stature. The low-
angle could be used in a reversed way. Thus "low angle on Shaktiman" would
indicated that he would be shown from a low angle, emphasizing his size and
height, as a small subject, like a child, would see her.
CAMERA MOVEMENTS: Some camera movements can be used not only to follow moving people or
objects but also to provide different psychological effects.
Follow: The camera follows the character's actions while maintaining approximately the same image size and perspective.
Zoom in / Zoom out: In a zoom the elements of the lens move, magnifying (zoom in) or reducing (zoom out) objects in a way that the human eye cannot. It can
present shots ranging from a CU to a LS and any composition in between.
Dolly in / Dolly out: An effect similar to zoom in/out can be achieved by having the entire camera move toward (dolly in) or away from (dolly out) the talent or the
scene.
Pan right / Pan left: The panoramic view of the scene can be shown by having the camera mount remain stationary but pointing the lens of the camera to cover
the scene. "Pan right" indicates that the camera is to cover or show the scene
beginning at the left and continuing to the right. "Pan left" provides the opposite
perspective.
Tilt up / Tilt down: The camera can show or setting a talent going from a low to a high angle (tilt up) and from high angle to low angle(tilt down).
Truck right / Truck left: The term "truck" is used when you want to follow the panoramic action but maintain the same distance between the camera and the
action on the talent. In this case the camera is mounted on a trolley that moves
on rails.
Pedestal / Boom / Crane-up or down: Here the camera is placed on a crane. The scene can be obtained as in case of tilt, but it provides extra visual
perspective for the viewer. The camera shot would be continuous from a normal
angle to a unusually high or low angle.
VISUAL TRANSITION: Moving from one shot to another shot is called transition. The following terms are
used to describe transitions or the visual adjustments between composed shots.
Fade in / Fade out: At the beginning or end of a scene or an act, or a major division of production. Gradual appearance of the visual on the screen is fade-in
and gradual disappearance is fade-out. Both fade-in and fade-out can be quick or
slow depending upon the requirement. There is no overlapping of scenes.
Cut: This is an instantaneous change from one shot to another. Since this is the most common visual transition between shots, it is not written in the scripts.
Dissolve: A shot gradually fades out as another gradually fades in. The two images overlap. It can be a "quick dissolve", or a "slow dissolve". The image
obtained by stopping a dissolve midway is known as super. A "match dissolve" is
made from one shot to another that is closely related in picture size and
appearance.
Key: It essentially means placing one image into the background picture of another. A "