1
2011-2012 D’Crypt Pte Ltd (Co. Reg.: 200002505W). All rights reserved. All trademarks belong to the respective owners. TelePort-II is the next-generation TelePort concentrator designed fully in-house by D’Crypt Pte Ltd. It offers a much higher concentrator bandwidth with increased fault tolerance that minimizes any single point of failure. Key features Scalable design TelePort-II concentrator chassis contains slots for up to 8 Tunnel Modules (TMs) with each TM capable of supporting up to 32 tunnels. High bandwidth TelePort-II supports a maximum single- tunnel bandwidth of 3 Mbps and an aggregate bandwidth determined by the number of TMs installed. High tunnel capacity Up to 256 tunnels can be supported at any one time. Intelligent routing A novel routing algorithm assures that TelePort-II distributes load evenly over all TMs with minimal routing latency. Highly resilient to hardware failure The multi-TMs design guarantees that the failure of any TM only reduces overall tunnel capacity while redundant power supplies allows the unit to continue to operate even when one power supply is down. Fully back-compatible with existing TelePort clients TelePort-II is a drop-in replacement for any TelePort concentrator. Existing TelePort clients will be able to ‘tunnel’ to the TelePort-II concentrator seamlessly. Security Each TM is built upon a FIPS 140-2 Level 3 certified d’Cryptor QE cryptographic core (Certificate No. 465) Secure storage of keys that are erased upon tamper detection or casing removal AES 256-bit encryption Two-way challenge-response crypto handshake Diversified key scheme Dedicated button for emergency key erasure Blacklisting of missing or stolen TelePort clients Performance Up to 24 Mbps aggregate bandwidth Technical Specifications TelePort-II Concentrator CON-E2-2 CON-E2-4 CON-E2-8 Ports 100BaseT LAN 100BaseT WAN USB 2.0 Indicators 4 LEDs (PWR, TMP, LAN, WAN) Tunnel modules 2 4 8 Tunnels supported 64 128 256 Electrical Input supply 115-230 VAC Typical consumption 150W Battery Type CR123A Duration 1 year Environment Temperature 0-40°C Humidity 5-90% non-condensing Dimensions (W x D x H) 460 mm x 536 mm x 90 mm Specifications subject to change without notice D ’ C r y p t T e l e P o r t I I TelePort-II Concentrator Another quality product by: D’Crypt Pte Ltd 20 Ayer Rajah Crescent, #08-08, Singapore 139964. DID: +65 6773 9016 FAX: +65 6873 0796 URL: http://www.d-crypt.com EMAIL: [email protected]

TelePort-II Brochure V1.3 - d-crypt.com · TelePort-II is a drop-in replacement for any TelePort concentrator. Existing TelePort clients will be able to ‘tunnel’ to the TelePort-II

  • Upload
    others

  • View
    13

  • Download
    0

Embed Size (px)

Citation preview

Page 1: TelePort-II Brochure V1.3 - d-crypt.com · TelePort-II is a drop-in replacement for any TelePort concentrator. Existing TelePort clients will be able to ‘tunnel’ to the TelePort-II

2011-2012 D’Crypt Pte Ltd (Co. Reg.: 200002505W). All rights reserved. All trademarks belong to the respective owners.

TelePort-II is the next-generation TelePort concentrator designed fully in-house by D’Crypt Pte Ltd. It offers a much higher concentrator bandwidth with increased fault tolerance that minimizes any single point of failure.

Key features Scalable design TelePort-II concentrator chassis contains slots for up to 8 Tunnel Modules (TMs) with each TM capable of supporting up to 32 tunnels.

High bandwidth TelePort-II supports a maximum single-tunnel bandwidth of 3 Mbps and an aggregate bandwidth determined by the number of TMs installed. High tunnel capacity Up to 256 tunnels can be supported at any one time. Intelligent routing A novel routing algorithm assures that TelePort-II distributes load evenly over all TMs with minimal routing latency. Highly resilient to hardware failure The multi-TMs design guarantees that the failure of any TM only reduces overall tunnel capacity while redundant power supplies allows the unit to continue to operate even when one power supply is down. Fully back-compatible with existing TelePort clients TelePort-II is a drop-in replacement for any TelePort concentrator. Existing TelePort clients will be able to ‘tunnel’ to the TelePort-II concentrator seamlessly.

Security Each TM is built upon a FIPS 140-2 Level 3 certified d’Cryptor QE cryptographic core (Certificate No. 465)

Secure storage of keys that are erased upon tamper detection or casing removal

AES 256-bit encryption

Two-way challenge-response crypto handshake

Diversified key scheme

Dedicated button for emergency key erasure

Blacklisting of missing or stolen TelePort clients

Performance Up to 24 Mbps aggregate bandwidth

Technical Specifications

TelePort-II Concentrator CON-E2-2 CON-E2-4 CON-E2-8

Ports

100BaseT LAN √

100BaseT WAN √

USB 2.0 √

Indicators 4 LEDs

(PWR, TMP, LAN, WAN)

Tunnel modules 2 4 8

Tunnels supported 64 128 256

Electrical

Input supply 115-230 VAC

Typical consumption 150W

Battery

Type CR123A

Duration 1 year

Environment

Temperature 0-40°C

Humidity 5-90% non-condensing

Dimensions (W x D x H)

460 mm x 536 mm x 90 mm

Specifications subject to change without notice

D ’ C r y p t T e l e P o r t – I I

TelePort-II Concentrator

Another quality product by: D’Crypt Pte Ltd

20 Ayer Rajah Crescent, #08-08, Singapore 139964.

DID: +65 6773 9016 FAX: +65 6873 0796 URL: http://www.d-crypt.com EMAIL: [email protected]