Upload
lequynh
View
212
Download
0
Embed Size (px)
Citation preview
Teknatool Chuck Accessory Jaw Sets
www.teknatool.com
Ideal for those with lathes up to
12”/300mm swing.
Takes all the accessory jaws,
although only those designed for
smaller work are recommended for
use on the Precision Midi.
Available in insert/adaptor versions and
dedicated threaded versions.
Ideal for those with lathes
up to 20”/508mm swing.
Brilliant all-round geared
chuck for a majority of users.
Takes all the accessory jaws.
Available in insert/adaptor
versions and dedicated threaded
versions.
Ideal for those with lathes
with 24”/609mm swing and
larger. Takes all accessory
jaws, but also has one extra
special PowerGrip jaw dedicated
only to the Titan. The super
aggressive holding power of this geared
chuck and accessory is amazing!
Precision MidiPrecision Midi SuperNova2SuperNova2 Nova TitanNova Titan
Full Cross FunctionOnly Teknatool Chucks give you the same jaw fi xing system and same insert/adaptor system across all chuck models. This means all accessory jaws in the range fi t all the chucks in the range, including older chuck models*, giving you the ultimate fl exibility. In buying a Teknatool chuck, you can be confi dentthat whether you want to move up ordown the range, any accessories youhave invested in will fi t.
Special Dovetail Profi leTeknatool chucks have been especially designed so the jaws will cut into the wood, grip fi rmly in the contraction mode and provide high tear out strength.
Some chucks use an engineering jaw profi le (designed to hold a hard material like steel) or rounded profi les, which just crush the wood fi bres without digging in and holding securely.
Special Jaw Slides• All Teknatool Chucks use the same fi xing method,
meaning appropriate* accessory jaws can be fi tted across the range to any Teknatool Chuck.
• The jaw slides have automatic jaw stop safety feature - automatically prevents the jaw slides coming out from the chuck body.
• Precision fi t, designed for a long, tough life.• Large section guideways and large surface
area for long term surface and wear resistance.
• Teeth have radiused edge profi les to reduce wear and frictional resistance on scroll ring.
• Made from iron composite impregnated with copper – copper has outstanding qualities as an anti-seize and low friction agent. The copper is fused into the matrix for fi nest mechanical properties.
*The Compac Chuck requires additional accessory to fi t the Nova accessory jaw range. Not all accessory jaws are recommended
for use on every chuck in the range, for example large accessory jaws designed for big work are not recommended for use on the
small Precision Midi Chuck. Check comprehensive accessory jaw manual or pamphlet if in doubt, or ask your reseller.
50MM (2”) JAW SETCode: JS5ON
SPIGOT JAW 35MM (1.375”) Code: JS-SP35
STEP JAW SETCode: JS75DT
75mm (3”) BOWL JAWSCode: 6014
SPIGOT JAW 45mm (1.8”) Code: JS-SP45
100mm (4”) JAW SET Code:JS100N
130mm (5”) JUMBO JAW SET Code:JS13ON
POWERGRIP JAW SETCode: PJSN
COLE JAW SET Code: JSCOLE
MINI COLE JAW SETCode: 6006
VACUUM FACEPLATECode: FPV
TITAN POWER GRIPSCode: 13029
CHUCK SPUR CENTRE Code: NCSC
WOODWORM SCREW Code: 10006
75mm (3”) LONG NOSED JAWS Code:6017
35mm (1.35”) BOWL JAWS Code: 6019
25mm (1”) JAW SET Code: JS25N
PIN JAW SET (1”)Code: JSPIN
• One of our most popular and convenient jaws
for small bowl and small unsupported spigot
turning work. Ideal for mini/midi lathe work.
• Great for work below the size that can be
handled by the 50mm jaw set.
• The dovetail walls are 3 x the thickness of
conventional jaw types for rugged work holding for
larger/heavier bowl work.
• Screws go right through the wall section to add
more securing force where it’s needed most.
• Holding power for large bowls and also moderate
hollow forms.
• Deep smooth walled dovetail holds wood gently
but very fi rmly.
• Same style as 35 spigot, these jaws provide a
strong contracting grip to unsupported spigot
turning applications, e.g vases, goblets
• Can handle spigots up to 60mm (2.38”) and
minimum down to 38mm (1.5”).
• A versatile set designed for re-chucking of bowls to remove chuck marks, add decoration or to re-shape the bottoms of bowls that have already been turned.
• Other Nova jaw sets can be fi tted to the Cole Jaws making a combination jaw facility – expanding dovetail facility for mounting bowls/platters and a reverse dovetail for mounting footed bowls/platters.
• Many advantages over traditional vacuum chucking.
• Customisable with false wooden jaws.
• Standard Cole Jaws are suitable for lathes with minimum 12”/300mm swing diameter.
• A ‘supersized’ PowerGrip design these jaws
combined with the power and capacity of the Titan
Chuck – have far the most powerful grip of any other
chuck or jaw combination.
• Able to hold spigot work up to 19” long.
• Special 3 hole fi xing means these jaws can only be
used in conjunction with the Nova Titan 5” Chuck,
as the extra gripping power of the chuck enhances
the PowerGrip’s action. Able to hold large work up
to 750mm (29”) in diameter (with a dovetail facility
with up to 120mm (5”) recess).
• These extended jaws are designed to act like a pin chuck – expanding into a pre-bored hole.
• A useful technique for free form edge bowls.
• You don’t have to bore an exact size as with other pin jaws.
• The longer jaws allow for a very powerful spigot grip for smaller work such as lace bobbins. Also ideal for longer dowel work.
• Features a small dovetail to mount small bowls.
• Twist drills also can be gripped to enable the chuck
to be used as a drill chuck.
• A 50mm 2” rise above their mounting base means
very long reach deep inside of bowls.
• Tremendous holding power externally and
internally – very versatile jaw.
• Ideal for green wood turning.
• Internal features dovetail grip for holding footed
bowls and other footed work pieces.
• Internal powergrip for holding spigoted work
pieces.
• Designed for expanded dovetail, reverse dovetail
for gripping footed bowls.
• One of our most popular jaws to mount 12”-14”
bowls.
• Can mount false wooden jaws, so customised
jaws can be made for special purposes.
• A versatile set designed for re-chucking of bowls to remove chuck marks or to re-shape the bottoms of bowls that have already been turned.
• Other Nova jaw sets can be fi tted to the Cole Jaws making a combination jaw facility – expanding dovetail facility for mounting bowls/platters and a reverse dovetail for mounting footed bowls/platters.
• Many advantages over traditional vacuum chucking.
• Customisable with false wooden jaws.
• Mini Cole Jaws are suitable for lathes with a minimum 8”/203mm swing diameter.
• Never take the chuck off your lathe.
• Allows you to quick mount a spur center on your
chuck. For the bowl turner who also does some
spindle work.
• The 35mm bowl jaws fi t perfectly into the current
jaw range, picking up a small gap left between the
25mm and the 50mm.
• These jaws are perfect for small to medium sizes
with maximum grip, provided by the dovetail.
• Great for gripping the base (foot) of footed
bowls in the contracting mode.
• Three step sizes provide optimum gripping for
three foot sizes with minimal crush damaged
wood.
• Optimum Step sizes: 42mm (1.65”)
50mm (2”)
64mm (2.5”)
• The big brother to the 100mm jaw set.
• Designed to handle large work up to 750mm in
diameter.
• Ideal ‘companion jaw’ to both the Titan chuck and
the Supernova2 (the power of both these chucks
matches the big capacity of these jaws)
• Also ideal for use with centre saving systems.
• Designed for use with the 50mm jaw set.
• Provides a faceplate facility to enable you to
vacuum chuck.
• Allows you the maximum freedom in designing
any size or shape of carrier.
• Standard with most chucks (check with your
reseller or on our website).
• Quick and easy method to mount unformed small
bowl blanks.
• Provides a secure mounting to form the outside of
bowls.
• Specialist woodworm screws available for
PowerGrip and Cole Jaws.
• These jaws are standard with all Teknatool chuck
standard versions (excluding Nova Titan, which has
the Powergrip Jaw as standard).
• Versatile all round jaw to get you started, before
moving on to more specialized jaws. Able to handle
both bowl and spigot projects.
• Specially designed to provide a strong
contracting grip to unsupported spigot turning
applications, e.g vases, goblets. Can handle
spigots up to 50mm (2”) and minimum down to
30mm (13/36”).
• Also has expanding grip mode.
• The most powerful jaw available for large spigot/
hollow form turning on the SuperNova2.
• Also a multi purpose jaw for bowl turners and
hollow form turners.
• Dovetail sizes fi t neatly between the 75mm (3”)
and the 130mm (5”) Jumbo Jaw sets.
• Included with all standard versions of the Nova
Titan.
• Strong and fast mounting method for bowl blanks. A better alternative to the woodworm screw which is only suitable for smaller bowls.
• Offers the secure mounting of a faceplate with the quick convenience and power of a chuck. Strong mounting and method even with irregular sized wood and rough cut surfaces.
• Three Sizes:
- 50mm (2”)(fi ts standard 50mm jaws), Faceplate diameter (3”)
- 100mm (4”)(fi ts 100mm jaws), Faceplate diameter (5”)
- 130mm (5”)(fi ts 130mm jaws), Faceplate diameter 6.25”
FACEPLATE RINGSCodes: 6000, 6001, 6002
Teknatool: Smart Tools, Powerful Solutions
CHUCK JAW GAUGE Code: 10051
• This handy gauge is exclusive to the Nova chuck
range. Quickly and easily work out your dovetails
accurately. If you use a chuck, this is an essential
accesory!
• In addition, this useful gauge contains many of the
useful measuring and gauging functions used in the
wider workshop:
An angle checker for knives, carving tools, chisels
and planer blades, a diameter gauge, a centre
fi nder, a dowel gauge, a furniture angle gauge, a
ruler scale and many other functions.
Ideal for those with lathes
up to 14”/360mm swing.
Provides high geared chuck
power for smaller lathes.
Takes all the accessory jaws,
although only those designed for
smaller work are recommended for use
on the G3.
Available in insert versions and
dedicated threaded versions.
Nova G3Nova G3
50424_teknatool_a2.indd 150424_teknatool_a2.indd 1 9/6/06 12:11:31 PM9/6/06 12:11:31 PM