Tekna EVO:[UK] Tekna EVO - Mortek · PDF file40 50 60 20 10 min 100% 10 4:1 10:1 1:n 4-20 Analogue Version ... This digital version of the APG, includes additonal characteristics:

teknaEVOsolenoid dosing pumps

innovation > technology > future

water & industry > solenoid dosing pumps tekna evo2

The evolution of solenoid dosing pumps

Inventory Reduction

Reduce spares stock holding

4 models that cover from 1 to 60 lt/h with output pressure upto 20 bar

1 Casing Allows skids to be pre-assembled and pumps to beselected later on confirmation of dosing flow

603

800

600

Models

flow rate from 1 to 20 lt/h

803Models

flow rate from 20 to 60 lt/h

CompatiblePVDF pump head and ceramic ballvalve as standard

Full chemical compatibility

PVDF is suitable for almost allchemical used in the Industrial, WasteWater Treatment and potable Waterapplications

The use of Ceramic balls as standardimproves the pumping reliability andthe chemical compatibility of the wholeliquid end

evo

evo

CleverJust 4 Models, Just PVDF, All functions in one pump

innovation > technology > future 3

The special design and manufacturingprocess allow our diaphragm to haveunique life expectancy

Made of pure solid PTFE, the diaphragmis compatible with most chemicals

The diaphragm has been tested over aperiod of 5 years giving superior results

Routine diaphragm replacement is nolonger a requirement

Reduced maintenance

Full chemical compatibilityevo

Reduced power consumption as thesolenoid only draws the required powerto activate the pump base on theworking conditions

Stable dosing performance: improvepump efficiency as performance is notaffected by power supply fluctuations

Reduce inventory holding

evo

Intuitive programmingA new concept of programming menu Programming menu are self explanatory

and available in 5 languages

Once a function is selected the pump willshow only parameter to set linked to thespecific function

Reduced programming timeevo

ReliableLong life diaphgram with 5 yearsworking life tested

Steady Dosing PerformanceStabilized Multi Power Supply100÷240 Vac 50/60 Hz withreduced consumption


proportional dosage

SEL

Alarm

SEL

1:1

C

9

8

7

654

3

2

1 90

80

703040 50 60

20

10

min 100% 10

4:1

10:1

1:n

4-20

Analogue Version

teknaEVOAPGAnalogue dosing pump with constantflow rate manually adjustable,proportional flow rate according toan external analogue (4÷20 mA) ordigital pulse signal (e.g. from watermeter).

• Control dial (percentage and"n" value in multiplicationmode)

• 6 position adjustable switch:- 3 in division mode (1, 4, 10 = n)- 1 in multiplication mode (n=1)- 1 for proportional 4÷20 mA signal- 1 for constant functionality

• “pacing” function adjustable by dipswitch

timed dosage

Alarm

SELSEL

Time On

Time OnTime Off

C

90

80

703040

50 60

20

10

min 100%

0"

30"

60" 90"

120"

150"

180"

0"

30"

60" 90"

120"

150"

180"

teknaEVOATL

costant dosage

teknaEVOAKLAnalogue dosing pump withconstant flow rate manuallyadjustable by control dial onthe front panel, twofrequency range (0÷20% or0÷100%), Power-ON ledindicator

Analogue dosing pump with constantflow rate manually adjustable andtimed dosage with T on-T offdouble regulation.

• 3 control dials (flow ratepercentage - T on regulation -T off regulation)


Digital Version

proportional dosage

ESCstartstop

PROGmodeenter

Alarm

teknaEVO TPGDigital dosing pump withconstant flow rate manuallyadjustable, proportional flow rateaccording to an external analog(4÷20 mA) or digital pulse signal(e.g. from water meter).

This digital version of the APG,includes additonal characteristics:Timer function, ppm dosing,statistics, password and On/Offinput (remote switch)

proportional dosage

CAL

ESCstartstop

PROGmodeenter

Alarm

teknaEVO TPRDigital dosing pump withpH/Redox control meter built in.

• Digital interface for constant orproportional dosing, dependingon the measured pH or Rx value

• PT100 probe input forthermal compensation

• Repetition alarm relay

• Input On-Off for remotecontrol

• 4÷20 mA output for measuretransmission

timed dosage

ESCstartstop

PROGmodeenter

Alarm

teknaEVO TCKDigital dosing pump withconstant flow rate manuallyadjustable, or timer control.

• Programmable timed relay


100 ÷ 240 Vac50-60 Hz

24 ÷ 48 Vac (just for AKL and APG version)

AKL 603 N H P 0 000

AKL

APG

ATL

TPG

TPRTCK

Analogue dosing pump with constant flow rate manually adjustableAnalogue dosing pump with constant flow rate manually adjustable, with proportional flow rate according toan external analog (4÷20 mA) or digital signal (water meter)Analogue dosing pump with constant flow rate manually adjustable and timed dosage with T on-T off doubleregolation

Digital dosing pump with constant flow rate manually adjustable, with proportional flow rate according to anexternal analog (4÷20 mA) or digital signal (water meter)Digital dosing pump with pH/Redox control meter on board

Digital dosing pump with constant flow rate or timed

Digital

Analogue

VersionInterfaceCode Description

ModelCode Pressure

[bar]Flow rate

[lt/h]Fequency max[stroke./min]

Stroke capacity[cc/stroke]

Ø ConnectionsIN / OUT [mm]

Consumption[W]

20 18

2.53

1200,350,41

4 / 6 suc.4 / 7 dis.

12,0600121082

4568

160

0,420,520,630,83

4 / 6 12,2603

121051

7101518

320

0,360,520,780,94

4 / 6 23,9800

5421

20254054

300

1,111,392,22

3

8 / 12 22,2803

Power supplyCode

NO

Pump head materialCode Balls diaphragmPump head Connections

H Ceramic PTFEPVDF

AccessoriesCodice

P PVC

H PVDF

SealsCode Materials

0 FPM

1 EPDM

OptionsCode Description

000 Standard

Code

C

A

D

B

• Casing made in PP reinforced

with glass fiber

• IP 65 rated

• PTFE diaphragm

• Level control input

• Priming valve

• Complete standard installation

kit composed by: PVC foot

filter and injection valve, PVC

suction tube, PE delivery tube

and fixing bracket


Technical Features - Flow Rate and Dimensional Drawings

Model

600603800803

A(Height) [mm]

B(Width) [mm]

C(Depth) [mm]

D(Max Height) [mm]

231 119 145 257

149

600

603

800

803

Pression[bar]

FlowRate[lt/h ]


Typical Installation

40kontrol

MODEesc

CALente r

Backpressure valve

Pulse-emitter water meter

Flow Sensor

Multifuction ValveBleed valve

Mixer

Priming-aid

Tank

Suction Devices

On pulse-emitter water meter

On control instrument


lt/pulse

ConnectionsDN (mm)

SerieWoltmann

25 50 100 250 500 100050 50 50 - - -65 65 65 - - -80 80 80 - - -100 100 - - - -

- - - 150 150 150

Accessories Pulse-emitter water meter

Flanged Water Meters (Dry-dial magnetic coupling)

502

652 1/2

803

1004

1506

Water meters, with reading, for cold water up to 30 °C.

WE 25 WE 50 WE 100 WE 250 WE 500 WE 1000

SizeDNInch

hydr

aulic

dat

adi

men

sion

data

The meters wich we offer havehigh precision and sensitivityaccording to CEE standardrequirements.

Their plastic and metallic parts,in particular those in contactwith water, comply with currentregulations and are subject toextensive checks and controls.

Threadedwatermeters

3003001501245

10000

300285302228

240

250220272188

180

200200265184

160

200185258184

145

200165247184

125

3020151.24.5

10000

5055253

7.510000

8065403.212

10000

120120604.818

10000

Max flow (short period) Qmax m3/ltFlow rate with 0.1 bar loss charge m3/ltNominal flow Qn m3/ltMin flow (accuracy ±5%) Qmin m3/ltTransition flow (accuracy ±2%) Qt m3/ltMaximum reading m3

Length L mmWidth D1 mmHeight H mmFlange holes Ø mm

N°D2 mm

131/2

203/4

251

301 1/4

401 1/2

502

SizeDNInch

hydr

aulic

dat

adi

men

sion

data

3015450300010000

2010200800

10000

105

100400

10000

73.570280

10000

52.5500200

10000

31.530120

10000

Max flow (short period) Qmax m3/ltNominal flow Qn m3/ltMin flow (accuracy ±5%) Qmin m3/ltTransition flow (accuracy ±2%) Qt m3/ltMaximum reading m3

Length without adapters L mmLength with thread mmWidth D1 mmHeight H mm

1101908090

1302288090

160260110120

160280100120

200340110130

300472152200

• Single jet water meter• Wet dial • Roller reading• Cold water up to 30 °C• Max. connection 1”1/2 (40 mm)• For mounting solenoid dosing

pump

CN44 pulse/lt

CN11 pulse/lt

CNSeries

• Single jet water meter• Wet dial • Roller reading• Hot water up to 90 °C• Max. connection 1”1/2 (40 mm)

HB44 pulse/lt

HB11 pulse/lt

HBSeries

• Single jet water meter• Wet dial • Roller reading• Cold water up to 30 °C• Max. connection 1”1/2 (40 mm)

RBFSeries DR1

1 pulse/ltDRSeries

• Single jet water meter• Dry dial • Roller reading• Cold water up to 30 °C• Max. connection 2” (50 mm)

• Single jet water meter• Wet dial • Roller reading• Cold water up to 30 °C• Max. connection 2” (50 mm)

CB44 pulse/lt

CB11 pulse/lt

CBSeries


Slowmixers

[70 rpm]

Accessories Tanks • Mixers • Suction devices …

Tanks in polyethylene

Mixers

Tank Code

Capacity(Lt)

Height(cm)

Diameter(cm)

SER 50 50 45,5 40SER 100 100 64 46SER 250 250 87 59,5SER 300 300 95 67SER 500 500 118,5 76

SER 1000 1000 122 108,5

Models and Technical Features

Body Shaftlength (mm)

Motor(kW)

PVCAISI 316

6008009001100

90 0,13

100250300

500/1000

150

220

Tank reinforcement made of PVC (20 mm thick) to be used toinstall mixers and motor driven pumps or solenoid dosingpumps on tanks SER series.

Reinforcement

Code TankSML 100

SML 300SML 500SML 1000

Models

Our tanks are designed to assemble dosing systems with mixersand motor driven pumps or solenoid dosing pumps. All are madefrom food-safe polyethylene, resistant to almost all chemicalsnormally encountered.

Electric mixers three-phase (single-phase onrequest) and flange attachment. For tanks SERseries.

SML 250

Code TankModel

Capacity(Lt)

Height(cm)

Diameter(cm)

T150 150 75,5 51T300 300 87,5 67T400 400 99 72T800 800 120 90

T1500 1500 134 122

Models and Technical Features

SER 100SER 250SER 300SER 500SER 1000

SER 100SER 250SER 300SER 500SER 1000

UncoveredTanks inPolyethylene

Propeller diameter (mm)Fast (1400 rpm)Slow (70 rpm)

SERModel

Technical Features

Dimensions (mm)Length x Ø

Tube4x6

Tube8x12

Tanksuitability

450 x 22 l

l

l

l

l

l

l

l

l

l

450 x 34

650 x 22

650 x 34

900 x 22

900 x 34

1050 x 22

1050 x 34

1250 x 22

1250 x 34

Technical Features

Fastmixers

[1400 rpm]

Designed to contain our tanks SERseries.

Suction Devices

with levelprobe

without levelprobe

A suction filter is provided to protect pump valves from debris orparticles that could obstruct the pump valve.

Suction devices can also be supplied with integral level controls. Theseallow the use of alarms, and protect against the system running dry.

• Easy to install

• Standard FPM seals (EPDM upon request)

• Made of PCV with clear PVC suction tubing

• All suction devices are provided with a foot filter

• All suction devices are provided with a non return valve

SER 50

SER 100

SER 250

SER 300

SER 500/1000


Accessories Valves • Sensors • Priming-aid

Multifunction valve acts as: a back pressure valve, ananti-siphoning valve, a safety valve, a priming valve,a delivery drain valve (for maintenance)

Multifunction valve is fitted directly on the deliveryvalve on the dosing pump.

Technical FeaturesSafety valve with pressure selection 6(*) - 12 barBack pressure valve with pressure 1.5 barMax temperature of liquid 40°C

(*) 6 bar type, supplied with 8/12 tube connections

Material PVCMax flow rate 50 lt/hMax pressure 10 barConnections 1/2” g.m., tube 8x12, tube 4x6Diaphragm FPM (standard) or EPDM (upon request)Max temperature of liquid 35 °C

HY Series adjustables valves

HYC backpressurevalves

HYM Multi valve HYS Safety valves

Injection valves

Multifunction valve

Bleed valve

Backpressurevalves ST Seriesadjustables

Gas inside the pump casing could compromise the correctfunctioning of the dosing pump.

The bleed valve is used to automatically eliminate any gas thathas built up inside the pump casing. The bleed valve is fitteddirectly on the delivery side of the dosing pump.

Ø ConnectionsIN/OUT [mm] Valve body Diaphragm

PVC FPM - PTFE

PVDF FPM - PTFE4/68/12

4/68/12

Materials

Ø ConnectionsIN/OUT [mm] Valve body Diaphgram Seals

PVC PTFEFPM

EPDM4/6 - 8/12

PVDF PTFE FPM 3/4” DIN8063

Materials

Technical FeaturesMax temperatureof liquid 40° C

Flow SensorIn order to assess the actual dosing phase,the flow sensor can be used to detect thepump’s pulsations during the delivery phase:the sensor can also be used to determine theactual dosing flow rate. This flow sensor isfitted directly on the delivery valve on thedosing pump.

Body SealsPVC FPM

Materials

The precision of electronic pumps is affectedby fluctuations in pressure at the intake,especially between 0 and 1 bar.

The backpressure valve keeps a constantpressure inside the pipeline during thedosage. In addition, dosing with abackpressure avoids siphoning fromoccurring in the pump.

Ø ConnectionsIN/OUT [mm] Valve body Diaphragm

PVCPVDF

PTFE 4/6(*)

Materials

Technical FeaturesMax pressure 10 barMin pressure 0.5 barMax flow rate 500 lt/h

Technical FeaturesMax pressure 10 barMax temperature of liquid 40° C

Priming-aidPriming problems may occur on dosing pumps with a low flowrate, and also in case of excessive suction heights in relationto the pump’s capacity. This accessory is able to resolve theseproblems. Where possible it is fitted at the same height as thepump’s intake valve and a short distance from it.

Technical FeaturesTemperatura max. del liquido 40° C

Body SealsPVC FPM 4/6 - 8/12 300 ml

Materials Ø ConnectionsIN/OUT [mm] Model

Material PVCMax flow rate 50 lt/hConnections IN 1/2” g.m., tube 8x12, tube 4x6Connections OUT 1/2” g.m.Max working pressure 10 barSeals FPM (standard) or EPDM (upon request)Max temperature of liquid 35 °C

www.seko.com

SEKO Asia Pacific SINGAPORE • SEKO China CHINA • SEKO do Brasil BRAZIL • SEKO DosingSystems USA • SEKO Deutschland GERMANY • SEKO France FRANCE • SEKO Iberica SPAINSEKO Italia ITALY • OOO SEKO RUSSIA • SEKO Northern Europe DENMARK • SEKO SIETAROMANIA • SEKO Southern Africa SOUTH AFRICA • SEKO UK UNITED KINGDOM

BRO EVOUK 071The technical data may be altered without prior warning. The drawings and images are for illustrative purposes only.

Documents

Tekna EVO:[UK] Tekna EVO - Mortek · PDF file40 50 60 20 10 min 100% 10 4:1 10:1 1:n 4-20 Analogue Version ... This digital version of the APG, includes additonal characteristics: