Upload
drakos-tasos
View
153
Download
1
Embed Size (px)
DESCRIPTION
Tekla Structure System Tutorial
Citation preview
Tekla StructuresSystem Manual
Product version 14.0April 2008
2008 Tekla Corporation
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
2008 Tekla Corporation and its licensors. All rights reserved.
This Software Manual has been developed for use with the referenced Software. Use of the Software, and use of this Software Manual are governed by a License Agreement. Among other provisions, the License Agreement sets certain warranties for the Software and this Manual, disclaims other warranties, limits recoverable damages, defines permitted uses of the Software, and determines whether you are an authorized user of the Software. Please refer to the License Agreement for important obligations and applicable limitations and restrictions on your rights.
In addition, this Software Manual is protected by copyright law and by international treaties. Unauthorized reproduction, display, modification, or distribution of this Manual, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the full extent permitted by law.
Tekla, Tekla Structures, Xcity, Xengineer, Xpipe, Xpower, Xsteel, and Xstreet are either registered trademarks or trademarks of Tekla Corporation in the European Union, the United States, and/or other countries. Other product and company names mentioned in this Manual are or may be trademarks of their respective owners. By referring to a third-party product or brand, Tekla does not intend to suggest an affiliation with or endorsement by such third party and disclaims any such affiliation or endorsement, except where otherwise expressly stated.
Portions of this software:
D-Cubed 2D DCM 2008 Siemens Product Lifecycle Management Software III (GB) Ltd.
EPM toolkit 1995-2004 EPM Technology a.s., Oslo, Norway. All rights reserved.
XML parser 1999 The Apache Software Foundation. All rights reserved.
Project Data Control Library 2006 - 2007 DlhSoft. All rights reserved.
DWGdirect, DGNdirect and OpenDWG Toolkit/Viewkit libraries 1998-2005 Open Design Alliance. All rights reserved.
FLEXnet Copyright 2006 Macrovision Corporation and/or Macrovision Europe Ltd. All Rights Reserved. This product contains proprietary and confidential technology provided by and owned by Macrovision Europe Ltd., UK, and Macrovision Corporation of Santa Clara, California, U.S.A. Any use, copying, publication, distribution, display, modification, or transmission of such technology in whole or in part in any form or by any means without the prior express written permission of Macrovision Europe Ltd. and Macrovision Corporation is strictly prohibited. Except where expressly provided by Macrovision Europe Ltd. and Macrovision Corporation in writing, possession of this technology shall not be construed to confer any license or rights under any of Macrovision Europe Ltd. and Macrovision Corporations intellectual property rights, whether by estoppel, implication, or otherwise.
Elements of the software described in this Manual may be the subject of pending patent applications in the European Union and/or other countries.
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
TEKLA STRUCTURES 14.0 3
Contents
Preface .............................................................................................................37Audience ........................................................................................................................................................... 37Additional help resources .................................................................................................................................. 37Conventions used in this guide ......................................................................................................................... 38Related guides .................................................................................................................................................. 39
1 Using Tekla Structures effectively......................................................... 411.1 General ................................................................................................................................................. 41
Firm and project folders ................................................................................................................... 42Numbering series ............................................................................................................................. 42Phases ............................................................................................................................................. 42Catalogs ........................................................................................................................................... 42Preferences...................................................................................................................................... 43
Profile names ............................................................................................................................ 43Connections .............................................................................................................................. 43Edge distance ............................................................................................................................ 43
Recording and running macros ........................................................................................................ 44Warning messages .......................................................................................................................... 45
1.2 Modeling ............................................................................................................................................... 45Automating the detailing process ..................................................................................................... 45Predefining part properties............................................................................................................... 46
Using predefined properties ...................................................................................................... 46Modeling tools .................................................................................................................................. 46AutoDefaults..................................................................................................................................... 47AutoConnection................................................................................................................................ 47
1.3 Drawings and printers........................................................................................................................... 47Drawing properties ........................................................................................................................... 48Layouts and templates ..................................................................................................................... 48Reports and symbols ....................................................................................................................... 48Selection filters................................................................................................................................. 48Wizards ............................................................................................................................................ 48Defining print devices....................................................................................................................... 48
1.4 Autosave............................................................................................................................................... 48Setting Autosave interval ................................................................................................................. 49
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
4 TEKLA STRUCTURES 14.0
Autosave file location ....................................................................................................................... 49Keeping Autosave files..................................................................................................................... 50Usernames ....................................................................................................................................... 50Application error ............................................................................................................................... 50
Fatal: Model memory corrupted by read. ................................................................................... 501.5 Customizing the interface...................................................................................................................... 51
Toolbars ........................................................................................................................................... 51Managing toolbars ..................................................................................................................... 51Icons .......................................................................................................................................... 52
Creating a user-defined toolbar ........................................................................................................ 52Creating a user-defined menu.......................................................................................................... 53Defining shortcuts............................................................................................................................. 53
1.6 Optimizing system performance............................................................................................................ 54Virtual memory ................................................................................................................................. 54Display adaptor ................................................................................................................................ 54Solid buffer size................................................................................................................................ 55How Tekla Structures handles solids ............................................................................................... 55
2 Multi-user mode....................................................................................... 572.1 Multi-user mode .................................................................................................................................... 57
When to use multi-user mode .......................................................................................................... 58Switching between single-user and multi-user modes ............................................................... 58
Overview of the multi-user system ................................................................................................... 59The Tekla Structures server ..................................................................................................... 59
How multi-user works ....................................................................................................................... 60Locking ...................................................................................................................................... 60
Setting up the multi-user system ...................................................................................................... 61Saving in multi-user mode................................................................................................................ 62
Save ........................................................................................................................................... 62Autosave .................................................................................................................................... 62
Saving model revision comments..................................................................................................... 63Shutting down the model.................................................................................................................. 64Copying multi-user models............................................................................................................... 64Displaying active multi-users ............................................................................................................ 64Clearing locks................................................................................................................................... 65Error messages ................................................................................................................................ 65Recommendations ........................................................................................................................... 66
Server computer ........................................................................................................................ 66Client computer .......................................................................................................................... 66Network ...................................................................................................................................... 67Model dump ............................................................................................................................... 67
2.2 Modeling in multi-user mode................................................................................................................. 67
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
TEKLA STRUCTURES 14.0 5
Working with a master model........................................................................................................... 67Numbering setup.............................................................................................................................. 71Numbering specific cases ............................................................................................................. 72
2.3 Drawings in multi-user mode ................................................................................................................ 73About drawing files........................................................................................................................... 73Guidelines for multi-user drawings................................................................................................... 73Locks for drawings ........................................................................................................................... 74
2.4 Maintenance procedures ...................................................................................................................... 74Checking multi-user databases........................................................................................................ 75Deleting unnecessary dg files .......................................................................................................... 75
2.5 Access rights ........................................................................................................................................ 75Locking objects ................................................................................................................................ 76Controlling access to attributes ........................................................................................................ 76Restricting access to model ............................................................................................................. 77Controlling access to numbering setup ............................................................................................ 78
3 Files and Folders ..................................................................................... 793.1 Initialization files.................................................................................................................................... 79
About variables ................................................................................................................................ 80Setting variables ........................................................................................................................ 80Using the Advanced Options dialog box ................................................................................... 80Editing the user.ini file ............................................................................................................... 80Disabling variables in an initialization file .................................................................................. 81
Structure........................................................................................................................................... 81Initialization file reading order .................................................................................................... 82Creating customized initialization files ....................................................................................... 83Including other initialization files ................................................................................................ 83
Creating shortcuts ............................................................................................................................ 833.2 File types and function.......................................................................................................................... 85
Input files.......................................................................................................................................... 85Component description files ...................................................................................................... 86
Data files .......................................................................................................................................... 86Data files and modeling tools .................................................................................................... 87
DSTV connection properties ............................................................................................................ 89Messages......................................................................................................................................... 89Profiles ............................................................................................................................................. 90
inp (ASCII) ................................................................................................................................. 90cnv (ASCII) ................................................................................................................................ 90lis (ASCII) .................................................................................................................................. 90Binary files ................................................................................................................................. 90
Bin .................................................................................................................................................... 91
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
6 TEKLA STRUCTURES 14.0
Fonts ................................................................................................................................................ 91Symbols............................................................................................................................................ 91System ............................................................................................................................................. 92
rpt ............................................................................................................................................... 92tpl ............................................................................................................................................... 92lay .............................................................................................................................................. 92plotdev.bin ................................................................................................................................. 92Wizard files (dproc) .................................................................................................................... 92
3.3 Folders .................................................................................................................................................. 92Folder structure ................................................................................................................................ 93Folder search order .......................................................................................................................... 94Model folder...................................................................................................................................... 95
Saved attributes ......................................................................................................................... 95System folder ................................................................................................................................... 96Project and firm folders .................................................................................................................... 96
Project folder .............................................................................................................................. 97Firm folder .................................................................................................................................. 97
Template folder ................................................................................................................................ 973.4 Customizing Tekla Structures ............................................................................................................... 98
Adding properties ............................................................................................................................. 98Changing user-defined fields ..................................................................................................... 99User-defined fields in templates .............................................................................................. 100Effect on numbering ................................................................................................................. 101
Interpreting objects.inp ................................................................................................................... 101Fields in objects.inp ................................................................................................................. 102
Customizing message files............................................................................................................. 102Changing the language of the user interface ................................................................................. 103Customizing parametric profiles ..................................................................................................... 104
Interpreting profitab.inp ............................................................................................................ 104Save defaults.................................................................................................................................. 105
Creating standard files ............................................................................................................. 106Customizing other files ............................................................................................................ 106
Creating AutoDrawings wizard files................................................................................................ 106Unfolding parameters ..................................................................................................................... 107Using flat bars ................................................................................................................................ 108
Defining flat bar sizes with fltprops.inp .................................................................................... 109Using market sizes ......................................................................................................................... 109
Defining market sizes with marketsize.dat ............................................................................... 110Example ................................................................................................................................... 110
3.5 Log files............................................................................................................................................... 110Tekla Structures log files ................................................................................................................ 110Numbering history log .................................................................................................................... 111
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
TEKLA STRUCTURES 14.0 7
Interpreting numbering.history ................................................................................................. 112Overlapping part/assembly series ........................................................................................... 113
Drawing history log......................................................................................................................... 113AutoDrawings Wizard log............................................................................................................... 113Viewing log files ............................................................................................................................. 114Direct access to parts from log files ............................................................................................... 114
Access part pop-up menu ....................................................................................................... 114
4 Catalogs ................................................................................................. 1154.1 Things you should know ..................................................................................................................... 115
Open a model first.......................................................................................................................... 116The filter ......................................................................................................................................... 116Saving a modified catalog .............................................................................................................. 116What is the difference between Update and OK?.......................................................................... 117
4.2 The profile catalog .............................................................................................................................. 117Working with rules.......................................................................................................................... 118
Defining the material of profiles ............................................................................................... 119Adding a rule ........................................................................................................................... 121Adding a next level rule ........................................................................................................... 121Editing a rule ........................................................................................................................... 121Organizing rules ...................................................................................................................... 121Deleting a rule ......................................................................................................................... 121
Viewing or modifying the profile catalog......................................................................................... 122Adding a profile .............................................................................................................................. 122
Copy an existing profile ........................................................................................................... 122Creating a new standard profile .............................................................................................. 123
Creating a cross section................................................................................................................. 123Cross section with no inner contours ....................................................................................... 123Cross section with inner contours ............................................................................................ 123
Modifying a cross section............................................................................................................... 124Different types of chamfer ....................................................................................................... 124
Deleting a cross section ................................................................................................................. 125Adding a standard (fixed) user-defined profile ............................................................................... 125Adding user-defined attributes to a profile ..................................................................................... 127Merging profile catalogs ................................................................................................................. 128Exporting the profile catalog........................................................................................................... 128Exporting elements from the profile catalog................................................................................... 128Importing from previous versions ................................................................................................... 129Importing the profile catalog........................................................................................................... 129
What happens to existing profiles? ......................................................................................... 129User-defined fixed cross section definitions ............................................................................ 130User-defined attributes ............................................................................................................ 130
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
8 TEKLA STRUCTURES 14.0
4.3 The material catalog............................................................................................................................ 130Viewing or modifying the material catalog...................................................................................... 130Adding a user-defined attribute to a material grade ....................................................................... 131
Units of measure ...................................................................................................................... 132Adding a material type.................................................................................................................... 132Adding a new material grade.......................................................................................................... 132Deleting a material grade ............................................................................................................... 133Defining your own symbols for materials........................................................................................ 133Export and import ........................................................................................................................... 134
4.4 The bolt and bolt assembly catalogs................................................................................................... 134Viewing or modifying the bolt catalog............................................................................................. 135Saving a modified bolt catalog ....................................................................................................... 137Viewing or modifying bolt assemblies ............................................................................................ 137Creating studs ................................................................................................................................ 139Merging bolt catalogs ..................................................................................................................... 141Exporting the bolt catalog............................................................................................................... 141Importing the bolt catalog ............................................................................................................... 141
Upgrading to a new version ..................................................................................................... 1414.5 The reinforcing bar catalog ................................................................................................................. 1424.6 For the advanced user ........................................................................................................................ 143
A closer look at the export file ........................................................................................................ 143Dos & donts of editing the export file ............................................................................................ 144Importing part of the bolt catalog.................................................................................................... 144Units used in export and import...................................................................................................... 145Bolt length calculation .................................................................................................................... 146
5 AutoConnection .................................................................................... 1515.1 AutoConnection setup......................................................................................................................... 151
AutoConnection setup .................................................................................................................... 152AutoConnection rule groups........................................................................................................... 153AutoConnection rule sets ............................................................................................................... 153Rules.zxt ........................................................................................................................................ 155Changing a connection................................................................................................................... 155
5.2 AutoDefaults setup.............................................................................................................................. 155AutoDefaults setup ......................................................................................................................... 156Connection properties files............................................................................................................. 157
Saving connection properties .................................................................................................. 157Access to properties files ......................................................................................................... 157
Defaults.zxt..................................................................................................................................... 158Priority of rule sets.......................................................................................................................... 158Editing connection properties ......................................................................................................... 158
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
TEKLA STRUCTURES 14.0 9
5.3 AutoConnection and AutoDefaults rules............................................................................................. 159Combining and iterating properties ................................................................................................ 161
Limitations ............................................................................................................................... 162Combining properties ..................................................................................................................... 162Iteration with connection check ...................................................................................................... 163Reaction forces and UDL............................................................................................................... 165
6 CNC......................................................................................................... 1676.1 NC files ............................................................................................................................................... 167
Setting up NC files ......................................................................................................................... 168Defining destination machines for parts ......................................................................................... 170Defining selection criteria ............................................................................................................... 170
Maximum size ......................................................................................................................... 171Profile type .............................................................................................................................. 171Maximum size of holes ............................................................................................................ 172
Defining hole properties ................................................................................................................. 172Creating NC files ............................................................................................................................ 172Defining the output format and folder............................................................................................. 173
6.2 DSTV .................................................................................................................................................. 174Fittings affect NC data.................................................................................................................... 174
6.3 DXF..................................................................................................................................................... 175Converting DSTV files to DXF ....................................................................................................... 176
6.4 Peddimat............................................................................................................................................. 176Creating NC files in Peddimat format............................................................................................. 176Output formats for Peddimat .......................................................................................................... 177Defining Peddimat standard tooling ............................................................................................... 177
6.5 Pop-marks ......................................................................................................................................... 178Creating pop-marks........................................................................................................................ 178Pop-mark settings .......................................................................................................................... 179
Pop-marking options ............................................................................................................... 1806.6 Hard stamps ....................................................................................................................................... 181
Creating hard stamps..................................................................................................................... 181Hard stamp properties.................................................................................................................... 181
Information contained in hard stamps ..................................................................................... 182Position of hard stamps ........................................................................................................... 182Hard stamps for secondary parts ............................................................................................ 182
6.7 Plate nesting ....................................................................................................................................... 183Creating nesting tasks.................................................................................................................... 183Editing nesting tasks ...................................................................................................................... 183
Task properties ........................................................................................................................ 184
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
10 TEKLA STRUCTURES 14.0
Defining stocks ............................................................................................................................... 184Stock properties ....................................................................................................................... 185
Nesting tasks.................................................................................................................................. 185Viewing nesting results................................................................................................................... 186
7 Import and export.................................................................................. 1877.1 Import and export basics..................................................................................................................... 187
Using import and export ................................................................................................................. 188Available formats............................................................................................................................ 188
Importing into Tekla Structures ................................................................................................ 188Exporting from Tekla Structures .............................................................................................. 190
7.2 Conversion files................................................................................................................................... 192Converting twin profiles .................................................................................................................. 192Creating conversion files ................................................................................................................ 192Locating conversion files ................................................................................................................ 193Sample conversion files ................................................................................................................. 193Troubleshooting.............................................................................................................................. 193
7.3 Importing models................................................................................................................................. 194Import tools..................................................................................................................................... 194Overview of importing models ........................................................................................................ 195
Finishing the import ................................................................................................................. 195Re-importing a model ..................................................................................................................... 197
Revision control options ........................................................................................................... 197Creating reports of import............................................................................................................... 198Importing DWG/DXF files ............................................................................................................... 199CIS import ...................................................................................................................................... 199CAD import ..................................................................................................................................... 200
CAD specific information ......................................................................................................... 200Creating log files ...................................................................................................................... 200
CAD import file types...................................................................................................................... 200SDNF specific options ............................................................................................................. 201
FEM import ..................................................................................................................................... 202FEM specific information ......................................................................................................... 202FEM import file types ............................................................................................................... 202
DSTV files ...................................................................................................................................... 203About DSTV ............................................................................................................................. 203
STAAD files .................................................................................................................................... 204Stan 3d files.................................................................................................................................... 204Bus import ...................................................................................................................................... 205Yield stress in FEM import ............................................................................................................. 205Model dump import......................................................................................................................... 206ASCII import ................................................................................................................................... 206
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
TEKLA STRUCTURES 14.0 11
ASCII format description ................................................................................................................ 206Attribute import............................................................................................................................... 211
About input files ....................................................................................................................... 212Example input file for drawings ............................................................................................... 213Example input file for parts ...................................................................................................... 214Data types file .......................................................................................................................... 214
Steelfab import ............................................................................................................................... 215Steelfab specific information ................................................................................................... 215
Fabtrol XML import......................................................................................................................... 215S-Frame import .............................................................................................................................. 216
About S-Frame imports ........................................................................................................... 216MicasPlus import............................................................................................................................ 216
MicasPlus specific information ................................................................................................ 216Eureka LPM import ........................................................................................................................ 216Overview of ELiPLAN import and export........................................................................................ 216
Import ELiPLAN status data .................................................................................................... 2177.4 Exporting files ..................................................................................................................................... 219
Exporting 3D DWG/DXF ............................................................................................................... 219Export as ................................................................................................................................. 220
Exporting 3D DGN ......................................................................................................................... 221Exporting FEM ............................................................................................................................... 222
Combine segments (MicroSAS) .............................................................................................. 222STAAD .................................................................................................................................... 222DSTV ....................................................................................................................................... 223
Exporting CIMsteel......................................................................................................................... 224Analysis model ........................................................................................................................ 224Manufacturing model ............................................................................................................... 226More CIMsteel information ...................................................................................................... 227
Exporting CAD ............................................................................................................................... 229PML ......................................................................................................................................... 230SDNF ....................................................................................................................................... 230XML ......................................................................................................................................... 232PDMS ...................................................................................................................................... 232
Exporting MIS................................................................................................................................. 233MIS types ................................................................................................................................ 233MIS list file ............................................................................................................................... 234
Exporting ASCII.............................................................................................................................. 234Exporting IFC ................................................................................................................................. 234Exporting a model dump ................................................................................................................ 237Exporting BVBS ............................................................................................................................. 238
Exporting reinforcement to BVBS format ................................................................................. 240Export rebar BVBS (78) dialog box ......................................................................................... 240BVBS (78) specification ........................................................................................................... 242
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
12 TEKLA STRUCTURES 14.0
Exporting Unitechnik ...................................................................................................................... 243Exporting cast units to Unitechnik format ................................................................................ 244Unitechnik export reference ..................................................................................................... 247Main ......................................................................................................................................... 248Unitechnik configuration .......................................................................................................... 253TS configuration ....................................................................................................................... 257Reinforcement ......................................................................................................................... 259Data specification .................................................................................................................... 263
Overview of ELiPLAN import and export ........................................................................................ 263Exporting ELiPLAN .................................................................................................................. 264
7.5 Exporting drawings.............................................................................................................................. 266Layers............................................................................................................................................. 266
Advanced line type and layer conversion ................................................................................ 2687.6 Reference models ............................................................................................................................... 271
Using a reference model ................................................................................................................ 271Using several reference models..................................................................................................... 272Updating reference models ............................................................................................................ 273Handling large reference models ................................................................................................... 273Detecting changes in reference models ......................................................................................... 273Reference model objects................................................................................................................ 276
Selecting reference models and reference model objects ....................................................... 276Listing reference models and reference model objects in reports ........................................... 277
Supported DGN objects ................................................................................................................. 2777.7 Tekla WebViewer ................................................................................................................................ 278
Publishing a model as a web page................................................................................................. 278Web templates ............................................................................................................................... 279Emailing WebViewer models.......................................................................................................... 279Receiving WebViewer models........................................................................................................ 279Sending WebViewer links............................................................................................................... 280Handling named views ................................................................................................................... 280Handling clip planes ....................................................................................................................... 281Hiding and showing objects............................................................................................................ 282Full content rendering..................................................................................................................... 282How to move and zoom?................................................................................................................ 282
8 Variables ................................................................................................ 2858.1 List of variables ................................................................................................................................... 285
Categories in the Advanced Options dialog box ............................................................................ 285User variables ................................................................................................................................ 286
8.2 A......................................................................................................................................................... 289XS_AD_CURVED_BEAM_SPLIT_ACCURACY_MM .................................................................... 289
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
TEKLA STRUCTURES 14.0 13
XS_AD_CURVED_BEAMS_BY_STRAIGHT_SEGMENTS .......................................................... 289XS_AD_DISABLE_EDITING_BY_UDA ......................................................................................... 289XS_AD_ELEMENT_ANGLE_CHECK_ANGLE_DIFF_LIMIT ........................................................ 289XS_AD_ENABLE_PLATE_CANTILEVER_REMOVAL.................................................................. 289XS_AD_MEMBER_NUMBER_VISUALIZATION........................................................................... 290XS_AD_MEMBER_TYPE_VISUALIZATION ................................................................................. 290XS_AD_NODE_COLLISION_CHECK_DISTANCE ....................................................................... 290XS_AD_NODE_NUMBER_VISUALIZATION ................................................................................ 291XS_AD_OPTIMISATION_DISABLED............................................................................................ 291XS_AD_OPTIMISATION_RECURSE_CATALOG......................................................................... 291XS_AD_PLATE_CANTILEVER_REMOVAL_LIMIT_MM............................................................... 291XS_AD_PLATE_MESH_CHECK_DISTANCE_LIMIT.................................................................... 291XS_AD_PLATE_MESH_CHECK_PART_ID.................................................................................. 292XS_AD_RESULT_DATABASE_ENABLED ................................................................................... 292XS_AD_SOLID_AXIAL_EXPAND_MM.......................................................................................... 292XS_AD_SUPPORT_VISUALIZATION........................................................................................... 292XS_AD_TWIN_PROFILES_ENABLED.......................................................................................... 292XS_ADJUST_GRID_LABELS........................................................................................................ 292XS_AISC_WELD_MARK ............................................................................................................... 293XS_ALIGN_CUT_SYMBOL_BY_VERTICAL_LINE....................................................................... 293XS_ALLOW_DRAWING_TO_MANY_MULTI_DRAWINGS .......................................................... 293XS_ALLOW_INCH_MARK_IN_DIMENSIONS .............................................................................. 294XS_ALLOW_INCH_MARK_IN_WELD_SYMBOLS ....................................................................... 294XS_ALLOW_SHEAR_PLATE_CLASH_FLANGE.......................................................................... 294XS_ALWAYS_CONFIRM_SAVE_WHEN_CLOSING_DRAWING ................................................ 294XS_ALWAYS_CONFIRM_SAVE_WHEN_EXIT ............................................................................ 294XS_ANCHOR_BOLT_PLAN_ADDITIONAL_PARTS_FILTER...................................................... 295XS_ANCHOR_BOLT_PLAN_BASEPLATE_FILTER..................................................................... 295XS_ANCHOR_BOLT_PLAN_BOLT_FILTER ................................................................................ 295XS_ANCHOR_BOLT_PLAN_COLUMN_FILTER.......................................................................... 295XS_ANCHOR_BOLT_PLAN_DRAWING_TOLERANCE............................................................... 295XS_ANCHOR_BOLT_PLAN_USE_VIEW_COORDSYS_FOR_BOLT_DIMENSIONS ................. 295XS_ANGLE_DIMENSION_SYMBOL_SIZE_FACTOR.................................................................. 296XS_ANGLE_TEXT_IN_UNFOLDING_BENDING_LINE_DIMENSIONING ................................... 296XS_APPLICATIONS ...................................................................................................................... 296XS_ARC_WIDTH_OF_CLOUD ..................................................................................................... 296XS_ASCII_IMPORT_CREATES_CONSTRUCTION_LINES......................................................... 297ASCII_LEGEND_PATH ................................................................................................................. 297XS_ASSEMBLY_DRAWING_VIEW_TITLE................................................................................... 297XS_ASSEMBLY_FAMILY_POSITION_NUMBER_FORMAT_STRING ........................................ 297XS_ASSEMBLY_MULTI_NUMBER_FORMAT_STRING.............................................................. 298XS_ASSEMBLY_POSITION_CODE_3D....................................................................................... 299XS_ASSEMBLY_POSITION_CODE_TOLERANCE ..................................................................... 299
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
14 TEKLA STRUCTURES 14.0
XS_ASSEMBLY_POSITION_NUMBER_FORMAT_STRING........................................................ 299XS_ASSOCIATIVE_CHANGE_HIGHLIGHT_SIZE........................................................................ 299XS_ASSOCIATIVE_CHANGE_HIGHLIGHT_SYMBOL................................................................. 300XS_ATTRIBUTE_FILE_EXCLUDE_LIST ..................................................................................... 300XS_AUTOCONNECTION_TOLERANCE ...................................................................................... 300XS_AUTOCONNECTION_USE_UDL............................................................................................ 300XS_AUTODEFAULT_UDL_PERCENT.......................................................................................... 300XS_AUTOMATIC_NEW_MODEL_NAME...................................................................................... 300XS_AUTOMATIC_USER_FEEDBACK_SAVING_INTERVAL....................................................... 301XS_AUTOMATIC_USER_FEEDBACK_SENDING_INTERVAL .................................................... 301XS_AUTOSAVE_DIRECTORY...................................................................................................... 301
8.3 B.......................................................................................................................................................... 301XS_BACKGROUND_COLOR1 ...................................................................................................... 301XS_BACKGROUND_COLOR2 ...................................................................................................... 302XS_BACKGROUND_COLOR3 ...................................................................................................... 302XS_BACKGROUND_COLOR4 ...................................................................................................... 302XS_BASE_LINE_WIDTH ............................................................................................................... 302XS_BASE_LINE_WIDTH_AFFECTS_SCREEN............................................................................ 303XS_BASICVIEW_HEIGHT ............................................................................................................. 303XS_BASICVIEW_POSITION_X ..................................................................................................... 303XS_BASICVIEW_POSITION_Y ..................................................................................................... 303XS_BASICVIEW_WIDTH............................................................................................................... 303XS_BEVEL_DIMENSIONS_FOR_PROFILES_ONLY ................................................................... 304XSBIN............................................................................................................................................. 304XS_BLACK_DRAWING_BACKGROUND...................................................................................... 304XS_BOLT_LENGTH_EPSILON ..................................................................................................... 304XS_BOLT_MARK_DIAMETER_PREFIX ....................................................................................... 304XS_BOLT_MARK_IS_ALWAYS_VISIBLE_IN_GA ........................................................................ 305XS_BOLT_MARK_STRING_FOR_SIZE........................................................................................ 305XS_BOLT_MARK_STRING_FOR_SIZE_IN_GA........................................................................... 305XS_BOLT_POSITION_TO_MIN_AND_MAX_POINT .................................................................... 305XS_BOLTS_PERPENDICULAR_TO_PART_PLANE_IN_NC ....................................................... 305
8.4 C.......................................................................................................................................................... 306XS_CALC_REFOBJ_PROTECT.................................................................................................... 306XS_CALCULATE_POLYBEAM_LENGTH_ALONG_REFERENCE_LINE .................................... 306XS_CENTER_TO_CENTER_DISTANCE_IN_ONE_PART_STRING ........................................... 306XS_CENTER_TO_CENTER_DISTANCE_IN_TWO_PARTS_STRING ........................................ 307XS_CHAMFER_ACCURACY_FACTOR........................................................................................ 307XS_CHAMFER_DISPLAY_LENGTH_FACTOR ............................................................................ 307XS_CHANGE_DRAGGED_DIMENSIONS_TO_FIXED................................................................. 307XS_CHANGE_DRAGGED_MARKS_TO_FIXED........................................................................... 307XS_CHANGE_DRAGGED_NOTES_TO_FIXED ........................................................................... 307
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
TEKLA STRUCTURES 14.0 15
XS_CHANGE_DRAGGED_TEXTS_TO_FIXED............................................................................ 308XS_CHANGE_DRAGGED_VIEWS_TO_FIXED............................................................................ 308XS_CHANGE_MARK_ASTERISK_TO.......................................................................................... 308XS_CHANGE_WORKAREA_WHEN_MODIFYING_VIEW_DEPTH ............................................. 308XS_CHECK_FLAT_LENGTH_ALSO............................................................................................. 308XS_CHECK_TRIANGLE_TEXT_SIZE........................................................................................... 308XS_CHORD_TOLERANCE_FOR_SMALL_TUBE_SEGMENTS .................................................. 309XS_CHORD_TOLERANCE_FOR_TUBE_SEGMENTS................................................................ 309XS_CHORD_TOLERANCE_SMALL_TUBE_SIZE_LIMIT............................................................. 310XS_CIS_DEP1_DATABASE_NAME ............................................................................................. 310XS_CIS_DEP1_DATABASE_PASSW........................................................................................... 310XS_CIS_DEP1_DATABASE_PATH .............................................................................................. 310XS_CIS_DEP1_EXPRESS_FILE .................................................................................................. 310XS_CLASH_CHECK_BETWEEN_REFERENCES ....................................................................... 310XS_CLASH_CHECK_COLOR....................................................................................................... 311XS_CLEAR_MODEL_HISTORY.................................................................................................... 311XS_CNC_HOLE_DIAMETER_ROUNDING................................................................................... 311XS_COLLECT_MODEL_HISTORY............................................................................................... 311XS_COMBINED_BOLT_DIM_CHARACTER................................................................................. 312XS_COMPLEX_PART_MEMBERS_DO_NOT_HAVE_TO_BE_MAIN_PARTS ........................... 312XS_COMPONENT_CATALOG_COLLECTION_NAME_LENGTH................................................ 312XS_COMPONENT_CATALOG_THUMBNAIL_SIZE ..................................................................... 312XS_CONCRETE_PART_NUMBERING_PREFIX.......................................................................... 313XS_CONCRETE_PART_NUMBERING_START_NUMBER ......................................................... 313XS_CONNECTING_SIDE_MARK_SYMBOL ................................................................................ 313XS_CONNECT_PLATE_PROFILES_IN_AUTOCONNECTION.................................................... 313XS_CONSIDER_NEIGHBOUR_PARTS_IN_HIDDEN .................................................................. 313XS_CONSIDER_REBAR_NAME_IN_NUMBERING ..................................................................... 313XS_CONVERT_OLD_FORCE_UNITS_TO_SI_FROM ................................................................. 313XS_CONVERT_OLD_MOMENT_UNITS_TO_SI_FROM.............................................................. 313XS_COUNT_ALL_PARTS_IN_NSFS_REPEATED_PART_MARK............................................... 314XS_COUNT_BOTH_PARTS_IN_NSFS_PART_MARK ................................................................ 314XS_CREATE_MISSING_MARKS_IN_INTELLIGENT_CLONING................................................. 314XS_CREATE_ROUND_HOLE_DIMENSIONS .............................................................................. 314XS_CREATE_CONNECTION_WHEN_COPYING_DRAWING_VIEWS ....................................... 314XS_CREATE_VIEW_FROM_MODEL_OLD_WAY........................................................................ 314XS_CS_CHAMFER_DIVIDE_ANGLE ........................................................................................... 315XS_CURVED_AXIS_PLACE ......................................................................................................... 315XS_CUT_SYMBOL_FONT ............................................................................................................ 315XS_CYCLIC_SOLVER_MAX_LOOPS .......................................................................................... 315XS_CYCLIC_SOLVER_USE_ATTRIBUTE_LOOPS..................................................................... 315
8.5 D ......................................................................................................................................................... 315DAK_BMPPATH ............................................................................................................................ 315
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
16 TEKLA STRUCTURES 14.0
XS_DEFAULT_FONT .................................................................................................................... 316XS_DEFAULT_FONT_SIZE .......................................................................................................... 316XS_DELETE_UNNECESSARY_DRAWINGS ............................................................................... 316XS_DETAIL_BOUNDARY_RADIUS .............................................................................................. 316XS_DETAIL_SYMBOL_REFERENCE........................................................................................... 316XS_DETAIL_VIEW_REFERENCE................................................................................................. 317XS_DGN_EXPORT_PART_AS ..................................................................................................... 317XS_DGN_EXPORT_USE_LOCAL_ID ........................................................................................... 317XS_DIMENSION_ALL_BOLT_GROUPS_SEPARATELY ............................................................. 317XS_DIMENSION_DECIMAL_SEPARATOR .................................................................................. 317XS_DIMENSION_DIGIT_GROUPING_CHARACTER................................................................... 318XS_DIMENSION_DIGIT_GROUPING_COUNT ............................................................................ 318XS_DIMENSION_EXTENSION_LINE_AWAY_FACTOR .............................................................. 319XS_DIMENSION_EXTENSION_LINE_ORIGIN_OFFSET............................................................. 319XS_DIMENSION_EXTENSION_LINE_TOWARD_FACTOR......................................................... 319XS_DIMENSION_FONT ................................................................................................................ 319XS_DIMENSION_LINE_TEXT_EPS.............................................................................................. 319XS_DIMENSION_PART_MARK_CONTENT_IN_ASSEMBLY...................................................... 319XS_DIMENSION_PART_MARK_CONTENT_IN_SINGLE ............................................................ 320XS_DIMENSION_PLATE_SIDE_MARK_SYMBOL_CENTER ...................................................... 320XS_DIMENSION_PLATE_SIDE_MARK_SYMBOL_LEFT ............................................................ 320XS_DIMENSION_PLATE_SIDE_MARK_SYMBOL_RIGHT.......................................................... 321XS_DIMENSION_POINT_CIRCLE_COLOR ................................................................................. 321XS_DIMENSION_POINT_CIRCLE_INNER_RADIUS ................................................................... 321XS_DIMENSION_POINT_CIRCLE_OUTER_RADIUS.................................................................. 321XS_DIMENSION_SKEWED_BOLTS_IN_PART_PLANE_IN_SINGLE_DRAWINGS ................... 321XS_DIR .......................................................................................................................................... 321XS_DISABLE_ADVANCED_OPTIONS ......................................................................................... 321XS_DISABLE_CANCEL_DIALOG_FOR_SAVE_NUMBERING_SAVE......................................... 322XS_DISABLE_CIS2 ....................................................................................................................... 322XS_DISABLE_CLASSIFIER_FOR_MODIFIED_PARTS ............................................................... 322XS_DISABLE_DRAWING_PLOT_DATE ....................................................................................... 322XS_DISABLE_PARTIAL_REFRESH ............................................................................................. 322XS_DISABLE_TEMPLATE_DOUBLE_CLICK ............................................................................... 322XS_DISABLE_VIEW_CENTERING_ASSEMBLY.......................................................................... 323XS_DISABLE_VIEW_CENTERING_GA........................................................................................ 323XS_DISABLE_VIEW_CENTERING_MULTI .................................................................................. 323XS_DISABLE_VIEW_CENTERING_SINGLE................................................................................ 323XS_DISABLE_WELD_PREP_SOLID ............................................................................................ 323XS_DISPLAY_ZERO_INCHES...................................................................................................... 323XS_DISTANT_OBJECT_FINDER_TOLERANCE.......................................................................... 323XS_DO_NOT_CHECK_DIMENSION_POINTS ............................................................................. 324XS_DO_NOT_CREATE_ASSEMBLY_DRAWINGS_FOR_CONCRETE_PARTS ........................ 324
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
TEKLA STRUCTURES 14.0 17
XS_DO_NOT_CREATE_PROFILE_DIMENSIONS_FOR_CONCRETE....................................... 324XS_DO_NOT_DISPLAY_CHAMFERS.......................................................................................... 324XS_DO_NOT_DRAW_COLUMN_MARKS_AT_45_DEGREES_IN_GA_DRAWING.................... 324XS_DO_NOT_EXTEND_DIMENSION_LINES_THROUGH_ALL_HOLES ................................... 324XS_DO_NOT_PLOT_DIMENSION_POINT_CIRCLES ................................................................. 325XS_DO_NOT_REMOVE_END_ABSOLUTE_DIMENSIONS ........................................................ 325XS_DO_NOT_USE_DMPAPER_USER ........................................................................................ 325XS_DO_NOT_USE_FOLDED_GUSSET_PLATE ......................................................................... 325XS_DO_NOT_USE_GLOBAL_PLATE_SIDE................................................................................ 325XS_DONT_SHOW_POLYBEAM_MID_EDGES............................................................................ 325XS_DRAW_ALL_SECTION_EDGES_IN_DRAWINGS ................................................................. 325XS_DRAW_ANGLE_AND_RADIUS_INFO_IN_UNFOLDING....................................................... 325XS_DRAW_BENDING_LINE_DIMENSIONS_IN_UNFOLDING ................................................... 326XS_DRAW_BOLT_HIDDEN_LINES.............................................................................................. 326XS_DRAW_BOLT_HIDDEN_LINES_IN_ASSEMBLY_DRAWINGS ............................................. 326XS_DRAW_BOLT_HIDDEN_LINES_IN_GA_DRAWINGS ........................................................... 326XS_DRAW_BOLT_HIDDEN_LINES_IN_SINGLE_DRAWINGS ................................................... 326XS_DRAW_BOLT_OWN_HIDDEN_LINES................................................................................... 326XS_DRAW_BOLT_OWN_HIDDEN_LINES_IN_ASSEMBLY_DRAWINGS .................................. 327XS_DRAW_BOLT_OWN_HIDDEN_LINES_IN_GA_DRAWINGS ................................................ 327XS_DRAW_BOLT_OWN_HIDDEN_LINES_IN_SINGLE_DRAWINGS ........................................ 327XS_DRAW_BOLTS_PERPENDICULAR_TO_PART_IN_SINGLE_DRAWINGS.......................... 327XS_DRAW_BOLTS_THROUGH_NEIGHBOUR_PARTS.............................................................. 327XS_DRAW_CAST_PHASE_INTERNAL_LINES ........................................................................... 327XS_DRAW_CAST_UNIT_INTERNAL_LINES ............................................................................... 327XS_DRAW_CHAMFERS_HANDLES ............................................................................................ 327XS_DRAW_CROSS_AXIS ............................................................................................................ 328XS_DRAWING_ASSEMBLY_HATCH_SCHEMA.......................................................................... 328XS_DRAWING_CAST_UNIT_HATCH_SCHEMA ......................................................................... 328XS_DRAWING_CHANGE_HIGHLIGHT_COLOR ......................................................................... 328XS_DRAWING_GA_HATCH_SCHEMA........................................................................................ 329XS_DRAWING_GRID_LABEL_FIXED_WIDTH ............................................................................ 329XS_DRAWING_GRID_LABEL_FRAME_LINE_WIDTH_FACTOR................................................ 330XS_DRAWING_HISTORY_LOG_TYPE........................................................................................ 330XS_DRAWING_IGNORE_ZERO_LEVELS_IN_PART_MARKS ................................................... 330XS_DRAWING_PART_REFERENCE_LINE_TYPE...................................................................... 330XS_DRAWING_PLOT_FILE_DIRECTORY................................................................................... 331XS_DRAWING_PLOT_FILE_NAME.............................................................................................. 331XS_DRAWING_PLOT_FILE_NAME_A ......................................................................................... 332XS_DRAWING_PLOT_FILE_NAME_W ........................................................................................ 332XS_DRAWING_PLOT_FILE_NAME_G......................................................................................... 332XS_DRAWING_PLOT_FILE_NAME_M......................................................................................... 332XS_DRAWING_PLOT_FILE_NAME_C......................................................................................... 332
www.cadfamily.com EMail:[email protected] document is for study only,if tort to your rights,please inform us,we will delete
18 TEKLA STRUCTURES 14.0
XS_DRAWING_POINT_SCALE .................................................................................................... 332XS_DRAWING_SCALE_SEPARATOR_CHAR ............................................................................. 332XS_DRAWING_SHEET_HEIGHT.................................................................................................. 333XS_DRAWING_SHEET_POSITION_X.......................................................................................... 333XS_DRAWING_SHEET_POSITION_Y.......................................................................................... 333XS_DRAWING_SHEET_WIDTH ................................................................................................... 333XS_DRAWING_SINGLE_PART_HATCH_SCHEMA..................................................................... 333XS_DRAWING_TEMPLATES_LIBRARY ...................................................................................... 333XS_DRAWING_UDAS_MODIFY_ALL_DRAWING_TYPES.......................................................... 333XS_DRAWING_UPDATE_VIEW_PLACING.................................................................................. 334XS_DRAWING_VIEW_DIRECTION_MARK_SYMBOL_FRONT................................................... 334XS_DRAWING_VIEW_DIRECTION_MARK_SYMBOL_TOP........................................................ 334XS_DRAWING_VIEW_DIRECTION_MARK_SYMBOL_BACK ..................................................... 335XS_DRAWING_VIEW_DIRECTION_MARK_SYMBOL_BOTTOM................................................ 335XS_DRAW_INSIDE_ANGLE_IN_UNFOLDI