Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Tekelec EAGLE® 5
Release 42.0
Feature Notice910-5857-001 Revision E
May 2011
Copyright 2011 TekelecAll Rights ReservedPrinted in USA
Notice
Information in this documentation is subject to change without notice. Unauthorized use, copying, or translation of thisdocumentation can result in civil or criminal penalties.
Any export of Tekelec products is subject to the export controls of the United States and the other countries whereTekelec has operations.
No part of this documentation may be reproduced, translated, or transmitted in any form or by any means, electronicor mechanical, including photocopying or recording, for any purpose without the express written permission of anauthorized representative of Tekelec.
Other product names used herein are for identification purposes only, and may be trademarks of their respectivecompanies.
RoHS 5/6 - As of July 1, 2006, all products that comprise new installations shipped to European Union member countrieswill comply with the EU Directive 2002/95/EC "RoHS" (Restriction of Hazardous Substances). The exemption forlead-based solder described in the Annex will be exercised. RoHS 5/6 compliant components will have unique partnumbers as reflected in the associated hardware and installation manuals.
WEEE - All products shipped to European Union member countries comply with the EU Directive 2002/96/EC, WasteElectronic and Electrical Equipment. All components that are WEEE compliant will be appropriately marked. For moreinformation regarding Tekelec's WEEE program, contact your sales representative.
Trademarks
TEKELEC, EAGLE, G-Flex, G-Port, and IP7 Secure Gateway are registered trademarks of Tekelec. The Tekelec logo,A-Port, EAGLE 5 ISS, IP7, and V-Flex are trademarks of Tekelec. All other trademarks are the property of their respectiveowners.
Patents
This product is covered by one or more of the following U.S. and foreign patents:
U.S. Patent Numbers:
5,008,929; 5,953,404; 6,167,129; 6,324,183; 6,327,350; 6,606,379; 6,639,981; 6,647,113; 6,662,017; 6,735,441; 6,745,041; 6,765,990;6,795,546; 6,819,932; 6,836,477; 6,839,423; 6,885,872; 6,901,262; 6,914,973; 6,940,866; 6,944,184; 6,954,526; 6,954,794; 6,959,076;6,965,592; 6,967,956; 6,970,542; 6,987,781; 6,987,849; 6,990,089; 6,990,347; 6,993,038; 7,002,988; 7,031,340; 7,035,239; 7,043,000;7,043,001; 7,043,002; 7,046,667; 7,050,456; 7,050,562; 7,054,422; 7,068,773; 7,072,678; 7,075,331; 7,079,524; 7,088,728; 7,092,505;7,108,468; 7,110,780;7,113,581; 7,113,781; 7,117,411; 7,123,710; 7,127,057; 7,133,420; 7,136,477; 7,139,388; 7,145,875; 7,146,181;7,155,206; 7,155,243; 7,155,505; 7,155,512; 7,181,194; 7,190,702; 7,190,772; 7,190,959; 7,197,036; 7,219,264; 7,222,192; 7,242,695;7,254,391; 7,260,086; 7,286,516; 7,286,839; 7,295,579; 7,304,957; 7,318,091; 7,319,857; 7,327,670; 7,366,530; 7,372,953; 7,383,298;7,401,360; 7,403,523; 7,403,537; 7,406,159; 7,439,854; 7,466,807; 7,466,815; 7,468,988; 7,502,611; 7,522,580; 7,525,997; 7,532,647;7,554,974; 7,564,870; 7,573,905; 7,580,517; 7,606,202; 7,616,659; 7,630,211; 7,631,093; 7,633,872; 7,633,969; 7,644,215; 7,650,367;7,675,905; 7,680,928; 7,693,066; 7,693,068; 7,701,925; 7,702,963; 7,706,343; 7,716,175; 7,720,463; 7,738,488; 7,738,489; 7,738,648;7,742,421; 7,743,131; 7,751,836; 7,760,706; 7,760,708;
Foreign Patent Numbers:
CA2033880; CA2292962; CA2351375; CA2352246; EP1062792; EP1135905; EP1161819; EP1169829; EP1173969; EP1177660;EP1192758; EP1240772; EP1247378; EP1252788; EP1266528; EP1269764; EP1285545; EP1290854; EP1303994; EP1308054;EP1314324; EP1356686; EP1364520; EP1371246; EP1377909; EP1425932; EP1556778; EP1679848; EP1715658; EP1755295;
Ordering Information
Your Tekelec Sales Representative can provide you with information about how to order additional discs.
Table of Contents
EAGLE 5 ISS Release 42.0.......................................................................................9Feature Content.........................................................................................................................964 PC support in M3UA DAUD message ...........................................................................13ANSI-41 AnalyzedInformation Query - no EPAP/ELAP ................................................14
Feature Control Requirements..................................................................................14Hardware Requirements............................................................................................14Commands...................................................................................................................14Measurements..............................................................................................................17Limitation.....................................................................................................................18
Command to perform migration of IPLIM to IPSG ..........................................................18Feature Control Requirements .................................................................................18Hardware Requirements............................................................................................18Limitations...................................................................................................................18
E5-OAM Integrated Measurements ....................................................................................18Feature Control Requirements..................................................................................19Hardware Requirements............................................................................................19Commands...................................................................................................................19Limitations...................................................................................................................21
EAGLE OA&M Password Security Enhancements ..........................................................21Feature Control Requirements..................................................................................21Hardware Requirements............................................................................................21Commands...................................................................................................................21Limitations...................................................................................................................22
FLOBR Enhancements ...........................................................................................................22Feature Control Requirements..................................................................................22Hardware Requirements............................................................................................23Commands...................................................................................................................23Limitations...................................................................................................................25
G-Flex MAP Layer Routing support for ATI using MSISDN ..........................................25Feature Control Requirements..................................................................................26Hardware Requirements............................................................................................26Commands...................................................................................................................26Limitations...................................................................................................................26
GTT Actions ............................................................................................................................26Feature Control Requirements..................................................................................27Hardware Requirements............................................................................................28Commands...................................................................................................................28
3910-5857-001 Revision E, May 2011
Measurements..............................................................................................................42Limitations...................................................................................................................43
High-speed IMT Packet Router (HIPR2) ............................................................................43Feature Control Requirements..................................................................................44Hardware Requirements............................................................................................44Commands...................................................................................................................44Limitations...................................................................................................................48
Large MSU Support for IP Signaling ...................................................................................48Feature Control Requirements..................................................................................49Hardware Requirements............................................................................................49Commands...................................................................................................................49Limitations...................................................................................................................51
LOCREQ Query Response ....................................................................................................51Feature Control Requirements..................................................................................51Hardware Requirements............................................................................................52Commands...................................................................................................................52Limitations...................................................................................................................53
MTP Routed GTT ...................................................................................................................53Feature Control Requirements..................................................................................53Hardware Requirements............................................................................................53Commands...................................................................................................................54Limitations...................................................................................................................54
SCTP Payload Protocol Identifier needs to handle Big Endian or Little Endianbyte order ...........................................................................................................................54
Feature Control Requirements .................................................................................56Hardware Requirements............................................................................................56Limitations...................................................................................................................56
S-Port Subscriber Differentiation .........................................................................................56Feature Control Requirements..................................................................................56Hardware Requirements............................................................................................57Commands...................................................................................................................57Limitations...................................................................................................................58
Support >25 SCCP cards with EPAP T1200 application server ......................................58Feature Control Requirements .................................................................................59Hardware Requirements............................................................................................59Commands...................................................................................................................59Limitations...................................................................................................................59
Support FastCopy on IPGW .................................................................................................59Feature Control Requirements .................................................................................59Hardware Requirements............................................................................................60Commands...................................................................................................................60
4910-5857-001 Revision E, May 2011
Limitations...................................................................................................................61Support IPSG Link Capacity Sharing ..................................................................................61
Feature Control Requirements .................................................................................62Hardware Requirements............................................................................................62Commands...................................................................................................................62Limitations...................................................................................................................64
Support of 750K System (SIGTRAN + ATM) TPS .............................................................65Feature Control Requirements..................................................................................65Hardware Requirements............................................................................................65Commands...................................................................................................................65Limitations...................................................................................................................66
Upgrade Enhancements.........................................................................................................66Feature Control Requirements .................................................................................67Hardware Requirements............................................................................................67Commands...................................................................................................................67Limitations...................................................................................................................67
Other Changes.........................................................................................................................67CRP for SRIs without HomeRN ...............................................................................67CutAndPaste parameter in Connect response to INP IDP Query ......................68E5-OAM Recovery Console.......................................................................................69E5-OAM/IP Ethernet Support..................................................................................70EAGLE USB Enhancements.......................................................................................70EOAP Hardware Maintenance Phase......................................................................71Extending IPSG Ethernet alarms to all Eagle applications that run on cards
supporting Ethernet interface..............................................................................73HIPR2: Add Extended BERT parameter to TST-IMT command..........................78HIPR2 - retrieval of extended statistics....................................................................78HIPR2 rate change optimization...............................................................................78Include optional CUG parameter in SRI_ACK ......................................................78Increase CSL GT List for IDPR and IAR..................................................................79Option to suppress NumberPortabilityStatusIndicator in SRI_ACK .................79Removal of X25 Gateway Support from EAGLE Code.........................................79Route SRI_SM for non-local or ported out subscribers using GTT ....................80Support >9 SM4G cards with LNP 384 Million......................................................80Update to the chg-stpopts Command......................................................................80Update to the dbg-ddb Command...........................................................................81Update to the inh-imt Command.............................................................................82Update to the msutrace Command..........................................................................82Update to the netstat -i Command...........................................................................84Update to the rept-imt-info Command....................................................................89Update to the rept-imt-lvl1 Command....................................................................91
5910-5857-001 Revision E, May 2011
Update to the rept-stat-assoc Command.................................................................95Update to the rept-stat-card Command...................................................................95Update to the rept-stat-mux Command..................................................................98Update to the rept-stat-sys Command.....................................................................98Update to the rtrv-ls Command................................................................................98Update to the rtrv-slk Command.............................................................................99
Operational Changes............................................................................................................100Unsolicited Alarm Messages...................................................................................100Unsolicited Information Messages.........................................................................104UAM Format Updates..............................................................................................109UIM Format Updates................................................................................................109Hardware Verification Codes..................................................................................110Error Messages..........................................................................................................110
Customer Care Center..........................................................................................................131Emergency Response............................................................................................................133Related Publications.............................................................................................................134Customer Training................................................................................................................134Locate Product Documentation on the Customer Support Site.....................................134EAGLE 5 ISS Card Overview Table...................................................................................134Hardware Baseline................................................................................................................141
Glossary..................................................................................................................147
6910-5857-001 Revision E, May 2011
List of TablesTable 1: GTT Actions Measurements Pegs......................................................................................42Table 2: TPS Capacities.......................................................................................................................58Table 3: UAMS: GTT Action - DUPLICATE.................................................................................100Table 4: UAMs: ANSI41 AIQ...........................................................................................................101Table 5: UAMs: E5-OAM Integrated Measurements...................................................................101Table 6: UAMs: HIPR2.....................................................................................................................102Table 7: UIMs: ANSI41 AIQ............................................................................................................104Table 8: UIM: E5-OAM IP/Ethernet Support...............................................................................105Table 9: UIMs: E5-OAM Integrated Measurements.....................................................................105Table 10: UIMs: FLOBR Enhancements.........................................................................................106Table 11: UIM: G-Flex MAP Layer Routing support for ATI using MSISDN..........................106Table 12: UIMS: GTT Actions..........................................................................................................106Table 13: UIMs: HIPR2.....................................................................................................................107Table 14: UIM: HIPR2: Add Extended BERT parameter to TST-IMT Command....................108Table 15: UIM: Integrated Measurements.....................................................................................109Table 16: UIM: Support Fast Copy on IPGHC GPL.....................................................................109Table 17: Hardware Verification Codes: HIPR2...........................................................................110Table 18: Error Messages: ANSI41 AIQ.........................................................................................110Table 19: Error Messages: Command to perform migration of IPLIM to IPSG.......................112Table 20: Error Message: E5-OAM Ethernet Support..................................................................113Table 21: Error Messages: E5-OAM Integrated Measurements.................................................113Table 22: Error Messages: OA&M Password Security Enhancements......................................114Table 23: Error Message: EAGLE USB Enhancements................................................................115Table 24: Error Message: EOAP Hardware Maintenance Phase................................................115Table 25: Error Message: Extending IPSG Ethernet alarms to all Eagle applications that
run on cards upport Ethernet interface....................................................................................116Table 26: Error Messages: FLOBR Enhancements........................................................................116Table 27: Error Messages: GTT Actions.........................................................................................117Table 28: Error Messages: HIPR2....................................................................................................126Table 29: Error Messages: HIPR2: Add Extended BERT parameter to TST-IMT
Command.....................................................................................................................................126Table 30: Error Message: HIPR2 - Rate Change Optimization...................................................127Table 31: Error Messages: HIPR2 - Retrieval of Extended Statistics..........................................127Table 32: Error Messages: LOCREQ Query Response.................................................................128Table 33: Error Message: MTP Routed GTT..................................................................................128Table 34: Error Messages: S-Port Subscriber Differentiation......................................................128Table 35: Error Messages: Support FastCopy on IPGW..............................................................129
7910-5857-001 Revision E, May 2011
Table 36: Error Message: Support IPSG Link Capacity Sharing................................................129Table 37: Error Messages: Support of 750K System TPS.............................................................129Table 38: Error Messages: Non-Feature Related ..........................................................................130Table 39: EAGLE 5 ISS Card Overview Table...............................................................................135Table 40: Hardware Baseline...........................................................................................................142
8910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0
Feature Content
Introduction
Feature notices are distributed to customers with each new release of software.
Revision E of the Feature Notice adds the content for the High-speed IMT Packet Router (HIPR2) card(Part Number 870-2872-01). This card was documented originally in the Release 41.1 Feature Notice:however, the card was not supported until Release 42.0. All other documentation for HIPR2, includingsupport for HIPR2 card 870-2872-02, which was originally included in the Release 42.0 Feature Notice,is unchanged.
New and Enhanced Features
• 64 PC support in M3UA DAUD message
Transmitted M3UA network management messages in response to M3UA DAUDs are revised tobe handled in separate phases before and after MSUs are transmitted during time slice processing.This separation allows support of up to 64 point codes.
• ANSI-41 AnalyzedInformation Query - no EPAP/ELAP
The ANSI-41 AnalyzedInformation Query feature allows response to an AnalyzedInformationquery using an optional parameter that contains pre-configured response digits. This feature isimplemented as a local SCCP subsystem and does not require EPAP or ELAP.
• Command to perform migration of IPLIM to IPSG
A new chg-card command is introduced to automate the migration of the IPLIM configurationto the IPSG configuration.
• E5-OAM Integrated Measurements
The E5-OAM Integrated Measurements feature allows the Measurements subsystem on the E5-OAMMASP to provide full support for collection and reporting for all collectible measurement entitiesfor nodes configured with up to 1200 links.
• EAGLE OA&M Password Security Enhancements
The EAGLE OA&M Password Security Enhancements feature increases the security measures usedby the EAGLE 5 ISS Password Management facility.
• FLOBR Enhancements
The Flexible Linkset Optional Based Routing feature is enhanced to provide additional Global TitleTranslation functionality.
• G-Flex MAP Layer Routing support for ATI using MSISDN
The G-Flex MAP Layer Routing support for ATI using MSISDN feature allows the existing G-FlexMAP Layer Routing feature to be configured to route AnyTimeInterrogation (ATI) messages using
9910-5857-001 Revision E, May 2011
the International Mobile Subscriber Identity (IMSI) or the Mobile Subscriber ISDN Number(MSISDN) from the MAP layer of the incoming message.
• GTT Actions
The GTT Actions framework increases the functionality of the Global Title Translation and FlexibleLinkset Optional Based Routing features. GTT Actions supports all functionality provided by theEnhanced GSM MAP Screening feature except for screening based on Forbidden Parameters inATI messages.
• High-speed IMT Packet Router (HIPR2)
A HIPR2 card is introduced. If the system uses only HIPR2 cards, and if the HIPR2 High Rate Modefeature is turned on, then the IMT inter-shelf bus can operate at 2.5 Gbps.
• Large MSU Support for IP Signaling
The Large MSU Support for IP Signaling feature allows the Large BICC MSU Support for IPSignaling feature to support additional service indicator values. As part of this feature, the LargeBICC MSU Support for IP Signaling feature is now referred as the Large MSU Support for IPSignaling feature.
• LOCREQ Query Response
The LOCREQ Query Response feature allows Routing information to be obtained for a LocReqquery.
• MTP Routed GTT
The MTP Routed GTT feature allows GTT and GTT Actions functionality to be performed onMTP-routed SCCP messages.
• SCTP Payload Protocol Identifier needs to handle Big Endian or Little Endian byte order
The byte format for the SCTP Payload Protocol Indicator (PPI) value that is received and transmittedin MSUs can be provisioned and displayed for M2PA associations.
• S-Port Subscriber Differentiation
The Service Portability (S-Port) Subscriber Differentiation feature allows subscribers to be identifiedusing Additional Subscriber Data (ASD) as well as the Generic Routing Number (GRN).
• Support >25 SCCP cards with EPAP T1200 application server
The Support >25 SCCP cards with EPAP T1200 application server feature allows up to 32 SCCPcards to be supported when any EPAP-based feature is turned on and an EPAP T1200 applicationserver is used.
• Support FastCopy on IPGW
The Support FastCopy on IPGW feature allows a system running the IPGHC application to useSTC-based or Fast Copy-based monitoring.
• Support IPSG Link Capacity Sharing
The Support IPSG Link Capacity Sharing feature enhances the IPSG flow control by allowing allof the signaling links on an IPSG card to share in the Transactions Per Second (TPS) of the card.
• Support of 750K System (SIGTRAN + ATM) TPS
The maximum allowed system TPS that can be provisioned is increased to 750,000 TPS if the HIPR2High Rate Mode feature is turned on. All TPS-based limitations on the number of IPLIM, IPGW,IPSG, and ATM/E5-ATM cards that are allowed within the EAGLE 5 ISS are removed.
10910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
• Upgrade Enhancements
There are multiple enhancements to the EAGLE 5 ISS upgrade procedure, including groupingcards by link type and the introduction of an expedited upgrade procedure.
Other Changes
• CRP for SRIs without HomeRN
The MNP Circular Route Prevention (CRP) feature is enhanced to allow CRP to be performed forSRI messages when a Home Routing Number (HomeRN) is not present.
• CutAndPaste parameter in Connect response to INP IDP Query
The INP feature is enhanced to allow the STP to add the CutAndPaste parameter in the Connectresponse to an INP IDP query.
• E5-OAM Recovery Console
If a mismatch occurs between the OAMHC and BLMCAP GPLs, then the E5-OAM Recovery Consoleinforms the operator and/or the mate E5-OAM that the card cannot load the application and allowsfor the selection of appropriate recovery procedures.
• E5-OAM/IP Ethernet Support
The IP/Ethernet provisioning and support infrastructure is expanded to include E5-MCAP hardware.• EAGLE USB Enhancements
The release number is incorporated into the value of the release parameter in the act-upgradecommand.
• EOAP Hardware Maintenance Phase
The EOAP is no longer supported. SEAS over IP and E5-IPSM cards must be used for the SEASinterface with Release 42.0 or greater.
• Extending IPSG Ethernet alarms to all Eagle applications that run on cards supporting Ethernet interface
Ethernet Unsolicited Alarm Messages supported by the IPSG card can be generated by all cardsthat have Ethernet interfaces and are running selected EAGLE 5 ISS applications.
• HIPR2: Add Extended BERT parameter to TST-IMT command
The HIPR2 card can support an Extended Bit Error Rate Test. This test is performed using thetst-imt command.
• HIPR2 - retrieval of extended statistics
An extended statistics profile can be obtained for one HIPR2 card or all HIPR2 cards in the system.• HIPR2 rate change optimization
The IMT rate change between high and low rate is controlled by IMT bus events instead of timers.• Include optional CUG parameter in SRI_ACK
The CUG-CheckInfo parameter in an incoming SRI message can be included in the outgoing SRI-ACKmessage.
• Increase CSL GT List for IDPR and IAR
The maximum number of entries for the Global Title Common Screening List is increased to 500for the Info Analyzed Relay Base and Prepaid IDP Query Relay features.
11910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
• Option to suppress NumberPortabilityStatusIndicator in SRI_ACK
The Number Portability Status Indicator (NPSI) can be omitted from all SRI-ACK messages.• Removal of X25 Gateway Support from EAGLE Code
The SS7-X25 gateway is no longer supported in the EAGLE 5 ISS code.• Route SRI_SM for non-local or ported out subscribers using GTT
SRI_SM messages can be modified to allow the message to be routed to an alternate network usingGlobal Title Translation (GTT).
• Support >9 SM4G cards with LNP 384 Million
Up to 18 E5-SM4G cards can be installed on the EAGLE 5 ISS with LNP feature quantities between12 and 384 million.
• Update to the chg-stpopts Command
The chg-stpopts command is enhanced to turn selected functionalities on and off using on andoff parameters and a mnemonic list of options or the individual parameters.
• Update to the dbg-ddb Command
The dbg-ddb command is enhanced to display multiple mismatch entries between cards.• Update to the inh-imt Command
The inh-imt command is updated to allow an IMT bus to be inhibited when an IMT rate changesequence is in progress.
• Update to the msutrace Command
The full version of the Help text for the msutrace command is updated to reflect the current code.The abbreviated version of the Help text is updated to increase readability.
• Update to the netstat -i Command
The output for the netstat -I command is enhanced to display complete information for theFast Copy GEI interfaces.
• Update to the rept-imt-info Command
The hourly statistics code for the rept-imt-info command is updated to display a dash (-) forcounts when an IMT bus is inhibited and to display an asterisk (*) as the statistics value when atleast one MUX card does not respond during IMT statistics collection.
• Update to the rept-imt-lvl1 Command
The rept-imt-lvl1 command is enhanced to provide additional error reports and additionalfiltering capability.
• Update to the rept-stat-assoc Command
The rept-stat-assoc command is updated to display 'B'' ports when appropriate.• Update to the rept-stat-card Command
The rept-stat-card command is updated to allow the card type to determine the number oflinks that are displayed in the command output.
• Update to the rept-stat-mux Command
The rept-stat-mux command is updated to display the most recent BIT Error Rate Test (BERT)status.
12910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
• Update to the rept-stat-sys Command
The output for the rept-stat-sys command is updated to show the status of the Fast Copysubsystem.
• Update to the rtrv-ls Command
The output for the rtrv-ls command is updated to abbreviate the transmission rate for the linkin bits per second (BPS) when the rate is greater than 1 million BPS.
• Update to the rtrv-slk Command
The output for the rtrv-slk command is updated to abbreviate the transmission rate for the linkin bits per second (BPS) when the rate is greater than 1 million BPS.
Operational Changes
• Unsolicited Alarm Messages• Unsolicited Information Messages• UAM Format Updates• UIM Format Updates• Hardware Verification Codes• Error Messages
64 PC support in M3UA DAUD message
Transmitted M3UA network management messages in response to M3UA DAUDs are revised to behandled in separate phases before and after MSUs are transmitted during time slice processing. Thisseparation allows support of up to 64 point codes.
For the first phase, no more than 20% of the total reserved SLKTPS (RSVDSLKTPS) assigned to theassociation on which the DAUD was received is used to transmit DAUD response messages. If oneor more of the association’s links is found with the RSVDSLKTPS set to zero, then the TPS sum is setto the maximum SLKTPS (MAXSLKTPS) for the first link found. No more than 20% of the MAXSLKTPSassigned to the association’s first link found with no RSVDSLKTPS is used to transmit DAUD responsemessages. For additional discussion of RSVDSLKTPS and MAXSLKTPS, see Support IPSG Link CapacitySharing .
For the second phase, after all the MSUs on the transmit queue have been sent, all associations cancompete for the remaining card capacity if needed. The capacity is based on the MAXSLKTPS. Theavailable remaining capacity is shared among the associations that perform DAUD processing. If morethan one association needs grants, then grants are distributed in a round robin fashion.
For a DAUD message received with 64 affected point codes, in order for the audit responses to beguaranteed enough bandwidth, it is recommended to set the RSVDSLKTPS/MAXSLKTPS high enoughto accommodate potentially up to 128 responses from this audit.
13910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
ANSI-41 AnalyzedInformation Query - no EPAP/ELAP
The ANSI-41 AnalyzedInformation Query (ANSI41 AIQ) feature allows customer migration from onetechnology to another (e.g. CDMA to LTE), on an individual subscriber basis. This feature addressestermination call handling by providing the ability to indicate which calls are destined for a particulartechnology.
The feature allows an AnalyzedInformation query to be responded to using an optional parameterthat contains pre-configured response digits. These digits are configured to map to trigger typeparameter values in the query. The Mobile Switching Center (MSC) that sent the AnalyzedInformationquery interprets the response digits to route the call appropriately.
The trigger type in the AnalyzedInformation query is determined by prior interaction between theMSC and the Home Location Register (HLR) which contains the subscriber information,
The ANSI41 AIQ feature is implemented as a local AIQ SCCP subsystem on the EAGLE 5 ISS anddoes not require the EPAP or ELAP database. A new AIQOPTS table is used to provision ANSI41 AIQoptions. This table is part of the existing EGLEOPTS table.
The AIQ subsystem supports SCCP UDT and non-segmented XUDT Class 0 or Class 1 messages andITU MTP/SCCP, ANSI MTP/SCCP, and ANSI TCAP messages. The subsystem does not supportsegmented SCCP or TCAP messages.
The ANSI41 AIQ feature does not support the ITU-N24 point code type.
Feature Control Requirements
• FAK for part number 893-0349-01• The GTT feature bit must be turned on before the ANSI41 AIQ feature can be enabled.• The ANSI41 AIQ feature cannot be enabled with a temporary FAK.• The ANSI41 AIQ feature can be turned on and off.
Hardware Requirements
The ANSI41 AIQ feature requires Service Module cards.
Commands
• alw/inh-map-ss—Enhanced to support the AIQ subsystem.• chg/rtrv-aiqopts—Added to provision ANSI41 AIQ data.
rtrv-aiqopts tekelecstp 09-12-03 07:53:46 EST EAGLE 42.0.0
AIQ OPTIONS --------------------- DIGMINLEN = 1 DIGMAXLEN = 32 RESPAR = rtdigits RESFMT = pfxdn TCAPERR = 138 (UnrecognizedParameterValue)
TRIGTYPE PFX
14910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
----------- ---------------------;
• chg/rtrv-mtc-measopts—Enhanced to support measurement reports for the ANSI41 AIQfeature.
rtrv-mtc-measopts tekelecstp 10-02-09 16:31:40 EST EAGLE 42.0.0
MTCHLNP = off MTCHNP = off MTCHMAP = off MTCHEIR = off MTCHVFLEX = on MTCHATINPQ = off MTCHGTTAPATH = off MTCHAIQ = off MTCDSTP = off MTCDLINK = off MTCDLNKSET = off MTCDSTPLAN = off MTCDLNP = off MTCDNP = off MTCDMAP = off MTCDEIR = off MTCDVFLEX = on MTCDATINPQ = off MTCDSCTPASOC = off MTCDSCTPCARD = off MTCDUA = off MTCDGTTAPATH = off MTCDAIQ = off
;
• chg/rtrv-sid—Enhanced to support the AIQ service.
rtrv-sid tekelecstp 09-12-09 15:46:50 EST EAGLE 42.0.0 PCA PCI PCN CLLI PCTYPE 001-001-001 2-002-2 00333 tekelecstp ANSI
CPCI (GFLEX) 2-002-3 2-002-4
CPCA (AIQ) 001-002-003 001-002-004
CPCA (GPORT) 001-001-002 001-001-003
;
• chg-th-alm—Enhanced to support the AIQ service.• enable/chg/rtrv-ctrl-feat—Enhanced to enable, turn on, and display the status of the
ANSI41 AIQ feature.
rtrv-ctrl-feat rlghncxa03w 09-12-03 16:40:40 EST EAGLE 42.0.0
The following features have been permanently enabled: Feature Name Partnum Status Quantity HC-MIM SLK Capacity 893012707 on 64 Command Class Management 893005801 on ---- LNP Short Message Service 893006601 on ---- XGTT Table Expansion 893006101 on 400000 XMAP Table Expansion 893007710 on 3000 Large System # Links 893005910 on 2000 Routesets 893006403 on 8000
15910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
EAGLE5 Product 893007101 on ---- EAGLE Product 893007201 off ---- IP7 Product 893007301 off ---- Network Security Enhance 893009101 off ---- Telnet 893005701 on ---- Port Chk for MO SMS 893009301 on ---- SCCP Loop Detection 893016501 off ---- LNP ELAP Configuration 893010901 on ---- LNP ported TNs 893011036 on 384000000 LNP ported LRNs 893010501 on 200000 LNP ported NPANXXs 893009402 on 350000 15 Minute Measurements 893012101 off ---- EIR 893012301 on ---- EAGLE OA&M IP Security 893400001 off ---- SCCP Conversion 893012001 on ---- ANSI41 AIQ 893034901 on ----
;
• ent-card—Enhanced to support 32 Service Module cards if the ANSI41 AIQ feature is turnedon.
• ent/chg/dlt-map—Enhanced to support the AIQ subsystem.• ent/chg/rtrv-srvsel—Enhanced to support the AIQ service.
rtrv-srvsel:serv=aiq tekelecstp 09-12-03 15:43:22 EST EAGLE5 42.0.0 GTII TT NP NAI SSN SNP SNAI SERV 4 0 e214 intl 10 --- --- aiq
SRV SELECTOR table is (4 of 20992) 1 % full;
• ent/chg/dlt/rtrv-ss-appl—Enhanced to support the AIQ application.
rtrv-ss-appl tekelecstp 09-12-03 14:42:38 EST EAGLE 42.0.0 APPL SSN STAT AIQ 12 online ATINPQ 10 online SS-APPL TABLE IS 33% FULL (2 OF 6);
• ent-trace—Enhanced to support the ANSI41 AIQ feature.• rept-ftp-meas—Enhanced to support measurement reports for the ANSI41 AIQ feature.• rept-stat-sccp—Enhanced to display the status of the AIQ service.
rept-stat-sccp tekelecstp 09-12-27 10:16:51 EST EAGLE 42.0.0 CARD VERSION TYPE PST SST AST 1105 126-030-000 DSM IS-NR Active ----- CARD ALARM STATUS = No Alarms. GTT: STAT = ACT CPU USAGE = 1% GFLEX: STAT = ACT CPU USAGE = 3% GPORT: STAT = ACT CPU USAGE = 9% AIQ: STAT = ACT CPU USAGE = 2% --------------- TOTAL = 15%
CARD SERVICE STATISTICS SERVICE SUCCESS ERRORS WARNINGS FORWARD TO GTT TOTAL GTT: 153 2 - - 155 GFLEX: 2582 0 0 0 2582 GPORT: 8171 0 1 102 8274 AIQ: 3089 0 - - 3089
Command Completed.;
16910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
• rept-stat-sys—Enhanced to display the status of the AIQ service. The output is also enhancedto increase readability.
rept-stat-sys rlghncxa03w 09-12-03 16:53:22 EST EAGLE5 42.0.0 MAINTENANCE STATUS REPORT Maintenance Baseline established. Routing Baseline established. SCCP Baseline established. ALARMS: CRIT= 9 MAJR= 10 MINR= 3 INH= 2 OAM 1113 IS-NR Active INH= 0 OAM 1115 IS-NR Standby INH= 0 LIM CARD IS-NR= 3 Other= 0 INH= 0 SCCP CARD IS-NR= 3 Other= 0 INH= 0 GLS CARD IS-NR= 0 Other= 0 INH= 0 SLAN CARD IS-NR= 0 Other= 0 INH= 0 VXWSLAN CARD IS-NR= 0 Other= 0 INH= 0 IPSG CARD IS-NR= 2 Other= 0 INH= 0 MUX CARD IS-NR= 2 Other= 3 INH= 0 MCPM CARD IS-NR= 0 Other= 0 INH= 0 EROUTE CARD IS-NR= 0 Other= 0 INH= 0 CLOCK IS-NR= 1 Other= 0 INH= 0 HS CLOCK IS-NR= 1 Other= 0 INH= 0 IMT IS-NR= 1 Other= 1 SLK IS-NR= 21 Other= 27 INH= 0 SS7IPGW CARD IS-NR= 0 Other= 0 INH= 0 IPGWI CARD IS-NR= 0 Other= 0 INH= 0 IPLIM CARD IS-NR= 0 Other= 0 INH= 0 IPLIMI CARD IS-NR= 0 Other= 0 INH= 0 IMT IS-NR= 2 Other= 0 SLK IS-NR= 0 Other= 6 INH= 0 DLK IS-NR= 0 Other= 0 INH= 0 LINK SET IS-NR= 0 Other= 4 INH= 0 DSM IP LK IS-NR= 0 Other= 0 INH= 0 MCPM CARD IS-NR= 0 Other= 0 INH= 0 EROUTE CARD IS-NR= 0 Other= 0 INH= 0 CLOCK IS-NR= 2 Other= 0 INH= 0 HS CLOCK IS-NR= 2 Other= 0 INH= 0 MCPM IP LK IS-NR= 2 Other= 0 INH= 0 APPLSOCK IS-NR= 0 Other= 0 INH= 0 SCTP ASSOC IS-NR= 0 Other= 0 INH= 0 APPL SERVER IS-NR= 0 Other= 0 INH= 0 SS7 DPC IS-NR= 0 Other= 6 INH= 0 CLUST DPC IS-NR= 0 Other= 1 INH= 0 RTX IS-NR= 2 Other= 1 INH= 0 XLIST DPC IS-NR= 0 Other= 0 DPC SS Actv = 0 Other= 0 SEAS SS IS-NR= 1 Other= 0 TERMINAL IS-NR= 2 Other= 14 INH= 0 MPS IS-NR= 2 Other= 0 SECURITY SS IS-NR= 1 Other= 0 EIR SS IS-NR= 1 Other= 0 RTD SS IS-NR= 0 Other= 1 INP SS IS-NR= 1 Other= 0 VFLEX SS IS-NR= 1 Other= 0 ATINPQ SS IS-NR= 1 Other= 0 LNP SS IS-NR= 1 Other= 0 FCS IS-NR= 1 Other= 0 AIQ SS IS-NR= 1 Other= 0;
Measurements
ANSI41 AIQ measurements are available on the Measurements Platform and on the E5-OAM. Themeasurements are not available on the OAM.
Note: The E5-OAM Integrated Measurements feature must be turned on before the measurements areavailable on the E5-OAM.
17910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
The measurements provide support for System and per SSP totals. The registers are included in dailyand hourly reports (MTCD-AIQ and MTCH-AIQ, respectively).
New measurement pegs for the ANSI41 AIQ measurements:
• AIQRCV—Total number of MSUs received by the AIQ service, including the MSUs received whenthe feature is enabled, but is not turned on.
• AIQSUCC—Total number of Return Results sent by the AIQ service.• AIQERR—Total number of ANSI41 AIQ queries resulting in Return Error and Reject Response
generation by the AIQ service, including the Return Error responses generated when the featureis enabled but is not turned on.
Limitation
The ANSI41 AIQ feature does not support subscriber-based routing.
Command to perform migration of IPLIM to IPSG
The Command to perform migration of IPLIM to IPSG feature introduces the chg-card commandto automate the migration from an IPLIM configuration to an IPSG configuration.
Note: If changing the configuration from IPLIM to IPSG exceeds the Transactions per Second (TPS)limits of the card or system, then the command is rejected.
Feature Control Requirements
There are no feature control requirements identified for this feature.
Hardware Requirements
Only E5-ENET hardware configured as IPLIM cards can be changed to IPSG using the chg-cardcommand
Limitations
No limitations are associated with this feature.
E5-OAM Integrated Measurements
The E5-OAM Integrated Measurements (Integrated Measurements) feature allows the Measurementssubsystem on the E5-OAM MASP to provide full support for the collection and reporting for allcollectible measurement entities for nodes configured with up to 1200 links. Systems with more than1200 links must install the Measurements Control Platform (MCP) for full measurement support.
The Integrated Measurements feature obsoletes the use of the File Transfer Area (FTA) formeasurements, and replaces the FTA functionality with FTP functionality. The E5-OAM/IP EthernetSupport enhancement is used to provide Ethernet support for FTP.
18910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
This feature requires the Measurements Subsystem to transition to the Integrated Measurements. Thetransition is performed by provisioning the oamhcmeas option in the chg-measopts command.Provisioning this parameter also turns on the Integrated Measurements collection function.
Note: The Integrated Measurements collection function cannot be turned off after it has been turnedon.
If the MCP is enabled prior to the transition, then the transition sequence transfers all historicalmeasurements data from the MCP to the OAM. The MCP does not collect and report measurementsduring transition.
After the transition is complete, the OAM takes control of the Measurements Subsystem and isresponsible for collection and reporting. The MCPM cards are set to IS-ANR - Restricted state, andthe MCP is turned off.
Feature Control Requirements
• FAK for Part Number 893-0373-01• The feature cannot be turned off after it is turned on.• A temporary FAK cannot be used to enable the feature.
Hardware Requirements
E5-OAM hardware must be installed before the Integrated Measurements feature can be enabled. Thefeature cannot be enabled if EOAM hardware is installed in either MASP slot.
Commands
• enable/chg/rtrv-ctrl-feat—Enhanced to enable, turn on, and display the status of theIntegrated Measurements feature.
rtrv-ctrl-feat rlghncxa03w 09-12-09 16:40:40 EST EAGLE 42.0.0
The following features have been permanently enabled: Feature Name Partnum Status Quantity HC-MIM SLK Capacity 893012707 on 64 Command Class Management 893005801 on ---- LNP Short Message Service 893006601 on ---- MNP Circ Route Prevent 893007001 on ---- XGTT Table Expansion 893006101 on 400000 XMAP Table Expansion 893007710 on 3000 Large System # Links 893005911 on 2800 Routesets 893006403 on 8000 EAGLE5 Product 893007101 on ---- EAGLE Product 893007201 off ---- IP7 Product 893007301 off ---- Network Security Enhance 893009101 off ---- Telnet 893005701 on ---- Port Chk for MO SMS 893009301 on ---- SCCP Loop Detection 893016501 off ---- LNP ELAP Configuration 893010901 on ---- LNP ported TNs 893011036 on 384000000 LNP ported LRNs 893010501 on 200000 LNP ported NPANXXs 893009402 on 350000 15 Minute Measurements 893012101 off ---- EIR 893012301 on ---- EAGLE OA&M IP Security 893400001 off ---- Integrated Measurements 893037301 off ----
;
19910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
• chg/rept-meas—Enhanced to support the Integrated Measurements feature.• chg/rtrv-measopts—Enhanced to provision and display the Integrated Measurements
functionality. The chg-measopts command is no longer used to control hourly and dailymaintenance reports. These reports are moved to the chg-mtc-measopts command. The formatof the rtrv-measopts command is also enhanced to be FAK independent.
rtrv-measopts rlghncxa03w 09-12-09 00:57:31 EST EAGLE 42.0.0
PLATFORMENABLE = on COLLECT15MIN = off CLLIBASEDNAME = on OAMHCMEAS = off ---------------------- SYSTOTSTP = on SYSTOTTT = off SYSTOTSTPLAN = on COMPLINK = off COMPLNKSET = on COMPSCTPASOC = on COMPSCTPCARD = off COMPUA = off GTWYSTP = on GTWYLNKSET = on GTWYORIGNI = on GTWYORIGNINC = on GTWYLSORIGNI = on GTWYLSDESTNI = off GTWYLSONISMT = off NMSTP = on NMLINK = on NMLNKSET = on AVLLINK = on AVLSTPLAN = on AVLDLINK = on ;
• chg/rtrv-mtc-measopts—Enhanced to control hourly and daily maintenance reports. See theCommands section for the ANSI41 AIQ feature for an example of the rtrv-mtc-measopts output.
• ent/dlt-slk—Enhanced to support the Integrated Measurements feature.• rept-ftp-meas—Enhanced to transfer reports from the E5-OAM.• rept-stat-card—Enhanced to support the Integrated Measurements feature.
rept-stat-card:loc=1113 tekelecstp 10-02-09 00:57:31 EST EAGLE 42.0.0 CARD VERSION TYPE GPL PST SST AST 1113 132-057-000 E5-OAM OAMHC IS-NR Active %23 ALARM STATUS = No Alarms. BPDCM GPL version = 132-048-000 IMT BUS A = Conn IMT BUS B = Conn E5-OAM IP CONNECTION IS-NR Active
Command Completed.;
• rept-stat-meas—Enhanced to report MASP status. If the MCPM or E5-OAM card is in theIS-NR or IS-ANR state, then the GPL version is shown.
rept-stat-meas PST SST AST MEAS SS IS-NR Active ----- ALARM STATUS = No Alarms
CARD VERSION TYPE GPL PST SST AST 1113 P 132-049-000 E5MCAP OAMHC IS-NR Active -----
20910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
IP Link A IS-NR Active ----- 1115 132-049-000 E5MCAP OAMHC IS-NR Active ----- IP Link A OOS-MT Unavail -----
CARD 1113 ALARM STATUS = No Alarms CARD 1115 ALARM STATUS = No Alarms
Command Completed.;
Limitations
No limitations are associated with this feature.
EAGLE OA&M Password Security Enhancements
The EAGLE OA&M Password Security Enhancements feature increases the security measures usedby the EAGLE 5 ISS Password Management facility.
New Security Measures:
• More restrictive password measures• Prevention of password re-use• Prevention of bypassing password re-use rules• Prevention of a common password pattern• Access to the EAGLE 5 ISS for a specified period without requiring a password change• Enhanced notification to the user that passwords have expired or are about to expire
Feature Control Requirements
The EAGLE OA&M IP Security Enhancements feature (Part Number 893-4000-01) must be turned onbefore passwords can be created or modified from a Telnet terminal (terminal IDs 17 - 40). If the featureis not turned on, then passwords must be created or modified from a Serial terminal (terminal IDs 1- 16).
Hardware Requirements
None.
Commands
The chg-pid, chg/rtrv-secu-dflt, ent-user, and login commands are enhanced to supportnew requirements for creating a password.
rtrv-secu-dflt rlghncxa03w 09-12-17 16:02:05 EDT EAGLE 42.0.0 SECURITY DEFAULTS ----------------- PAGE 60 UOUT 90 MULTLOG NO MINLEN 8 ALPHA 1
21910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
NUM 1 PUNC 1 MININTRVL 1 PNOTIFY 7 PGRACE 3 PREUSE 5 PCHREUSE 4;
Limitations
No limitations are associated with this feature.
FLOBR Enhancements
The Flexible Linkset Optional Based Routing (FLOBR) feature is enhanced to provide the followingfunctionality:
• Fall-back to GTT after EPAP-based Relay Services
Global Title Translation (GTT) can be performed on an MSU that is relayed to another destinationbased on routing data obtained from the EPAP database/PPSOPTS table by an EPAP-based service.GTT for Service Related MSUs is performed on a service selector basis. Each supported serviceselector can be configured to indicate whether GTT is required after service execution is complete.The MNP, GFLEX, GPORT, SMSMR, IDPR, INPMR, and TTR service selectors are supported.
• GTT/TT Commands allowed with EGTT
The ent/dlt/rtrv-tt and ent/chg/dlt/rtrv-gtt commands are supported for GTT simpleentries (entries that have not been modified by enhanced GTT processes) independently of theenabled GTT features.
• CdPA SSN for GTT Routing
GTT routing can be performed based on Called Party (CdPA) Subsystem Number (SSN) translationswhen the FLOBR feature is turned on.
• DPC for GTT Routing
The MTP Destination Point Code (DPC) can be considered as part of the routing criteria for GTTRouting.
• Use of the same GTT set types in a Translation Search
When performing a translation using FLOBR processing, lookup can occur in the same GTT settype up to 7 times during a search. The same set name cannot be repeated in a single GTT search.
• Feature independence of the TST-MSG tool
The TST-MSG tool can be used when any GTT feature is turned on.
Feature Control Requirements
• The GTT feature bit must be turned on before the Fall-back GTT functionality can be provisioned,the GTT commands can be used with EGTT, and the TST-MSG tool can be used with any GTTfeature.
22910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
• The FLOBR feature (Part Number 893-0277-01) must be turned on before the DPC for GTT Routing,CdPA SSN for GTT Routing, or Use of the Same GTT Set Types in a Translation Search functionalitycan be provisioned.
Hardware Requirements
E5-SM4G cards must be provisioned before any of enhancements that involve the FLOBR feature canbe provisioned. Use of the Test Tool and allowing the GTT/TT commands with the EGTT feature doesnot require E5-SM4G cards.
Commands
• chg/rtrv-sccp-msg—Enhanced to provision and display destination point code and SelectorID values.
rtrv-sccp-msg:msgn=1 tekelecstp 10-03-02 16:17:34 EST EAGLE 42.0.0 MSG = 1 ACTIVE = YES OPC = 010-010-010 DPC = 010-010-001 SELID = 6
CDPA_GTI = 2 CDPA_TT = 0 CDPA_SSN = 6 CDPC = 010-010-010 CDPA_NP = 1 ( e164 ) CDPA_NAI = 1 ( sub ) CDPA_GTA = 1234567890
CGPA_GTI = 2 CGPA_TT = 0 CGPA_SSN = 8 CGPC = 020-020-020 CGPA_NP = 1 ( e164 ) CGPA_NAI = 1 ( sub ) CGPA_GTA = 1234567890
LSN = ls111 EAGLEGEN = NO
TCAP_FAMILY = 67
TCAP_OPCODE = 32
TCAP_PACKAGE = bgn (0x62)
TCAP_ACN = 6-7-8-9-3
;
• ent/chg/dlt/rtrv-gta—Enhanced to provision and display destination point code values.The rtrv-gta command is also enhanced to display the Set Type.
rtrv-gta:gttsn=setdpc1 eagle1 10-02-04 09:45:44 EST EAGLE 42.0.0
GTTSN NETDOM SETTYPE NDGT setdpc1 ansi DPC -
GTA table is (2 of 269999) 1% full.
23910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
DPCA XLAT RI PCA 001-001-001 DPC GT 001-001-001 SSN=--- CCGT=no GTMODID=--------- TESTMODE=off FALLBACK=sysdflt OPTSN=--------- CGSELID=----- CDSELID=----- ACTSN=--------- PPMEASREQD= NO
Command Retrieved 1 Entries
;
See the Commands section for the GTT Actions feature for additional output examples for thertrv-gta command.
• ent/chg/dlt/rtrv-gtt—Enhanced to support GTT simple entries. These commands can beused when the EGTT feature is turned on.
• ent/chg/dlt/rtrv-gttsel—Enhanced to support GTT simple entries.
rtrv-gttsel tekelecstp 10-02-15 13:54:13 EST EAGLE 42.0.0
GTIA TT NP NAI SELID GTTSN 2 2 -- --- none setans002 2 5 -- --- none setans005
GTII TT NP NAI SELID GTTSN 2 4 -- --- none setint004 4 4 dflt dflt none setint004
GTIN TT NP NAI SELID GTTSN 2 6 -- --- none setnat006 4 6 dflt dflt none setnat006
GTIN24 TT NP NAI SELID GTTSN
GTIIS TT NP NAI SELID GTTSN 2 10 -- --- none setins010 4 10 dflt dflt none setins010
GTINS TT NP NAI SELID GTTSN
;
• ent/chg/dlt/rtrv-gttset—Enhanced to support the DPC set type.
rtrv-gttset:settype=dpc tekelecstp 10-03-14 08:10:20 EST EAGLE 42.0.0 GTTSN NETDOM SETTYPE NDGT Setdpc ansi DPC - Setdpc1 ansi DPC -
GTT-SET table is (8 of 2000) 1% full.
;
• ent/chg/rtrv-srvsel—Enhanced to determine whether GTT is performed on specified selectors.
Example 1 retrieves all provisioned service selectors.rtrv-srvsel tekelecstp 10-03-16 17:09:08 EST EAGLE 42.0.0 GTIA TT NP NAI SSN SNP SNAI SERV GTTRQD 2 9 -- --- * e212 intl gflex no DFLTACT=act123 GTTSELID=9 2 10 -- --- 3 e164 intl gflex no DFLTACT=act123456 GTTSELID=75 2 253 -- --- 4 e214 natl gflex no DFLTACT=actt1 GTTSELID=80
24910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
GTII TT NP NAI SSN SNP SNAI SERV GTTRQD 2 0 -- --- 2 e164 intl gflex no DFLTACT=act12345 GTTSELID=56 2 18 -- --- * e164 rnsdn inpmr yes DFLTACT=act123 GTTSELID=80 4 0 e214 sub * e214 sub gflex no DFLTACT=act123456 GTTSELID=98
GTIN TT NP NAI SSN SNP SNAI SERV GTTRQD 2 2 -- --- 3 e164 intl gflex no DFLTACT=act1234 GTTSELID=8 2 9 -- -- * --- --- inpq --- DFLTACT=--------- GTTSELID=----- 4 2 e164 natl * e164 rnndn inpmr yes DFLTACT=act1234 GTTSELID=432 4 9 --- --- 4 --- --- inpq --- DFLTACT=--------- GTTSELID=-----;
Example 2 retrieves all selectors for a specified service.rtrv-srvsel:serv=vflex tekelecstp 10-03-08 16:35:22 EST EAGLE 42.0.0 GTII TT NP NAI SSN SNP SNAI SERV GTTRQD 4 1 e164 intl 3 --- --- vflex --- DFLTACT=--------- GTTSELID=----- 4 2 e164 intl * --- --- vflex --- DFLTACT=--------- GTTSELID=-----
GTIN TT NP NAI SSN SNP SNAI SERV GTTRQD 4 4 e164 natl 4 --- --- vflex --- DFLTACT=--------- GTTSELID=-----
SRV SELECTOR table is (3 of 20992) 1 % full;
• ent/dlt/rtrv-tt—Enhanced to support simple GTT entries. These commands can be usedwhen the EGTT feature is turned on.
• tst-msg—Enhanced to support the FLOBR enhancements.
Limitations
No limitations are associated with this feature.
G-Flex MAP Layer Routing support for ATI using MSISDN
The G-Flex MAP Layer Routing support for ATI using MSISDN feature enhances the existing G-FlexMAP Layer Routing (G-Flex MLR) feature by providing the option to route AnyTimeInterrogation(ATI) messages using the Mobile Subscriber ISDN Number (MSISDN) from the MAP layer of theincoming message.
If the option is provisioned, then the MSISDN is converted to International Format and used fornumber conditioning and RTDB look up. If the option is not provisioned or if the MSISDN numberis not present in the MAP layer, then normal G-Flex routing using the SCCP called party number(CdPA) is performed.
25910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Feature Control Requirements
The G-Flex MLR feature (Part Number 893-0217-01) must be turned on before the gflexmaplayerrtgoption can be provisioned.
Hardware Requirements
None.
Commands
The chg/rtrv-gsmopts commands are enhanced to allow the gflexmaplayerrtg parameter to supportrouting messages based on the MSISDN in the incoming message. As part of this enhancement, thevalues for the parameter are changed from on and off to imsi, none, msidsn, and all. See the Commandssection for the CRP for SRIs without HomeRN enhancement for an example of rtrv-gsmopts output.
Limitations
No limitations are associated with this feature.
GTT Actions
The GTT Actions framework increases the functionality of the Global Title Translation (GTT) andFlexible Linkset Optional Based Routing (FLOBR) features. GTT Actions supports all functionalityprovided by the Enhanced GSM MAP Screening (EGMS) feature except for screening based onForbidden Parameters in ATI messages.
Note: Both GTT Actions and EGMS are supported and can co-exist in the system.
The GTT Actions framework consists of three separate features:
• GTT Action - DISCARD – there are three types of discard:
• Discard – discard message with no return error• UDTS – discard message and send UDTS/XUDTS independently of the value of the Message
Handling flag in the MSU• TCAP Error – return a specified TCAP Error for the opcode
The functionality performed by the GTT Action - DISCARD feature was originally performed bythe Origin-based SCCP Routing (OBSR) feature. All entries that were previously provisioned usingthe OBSR feature will be converted to a GTT Action and Action Set.
• GTT Action - DUPLICATE
Routes a copy of the message to a specified duplicate node. The original message is always routedbased on GTT/DB data. A copy of the message is routed to a specified duplicate node if the nodeis available.
• GTT Action – FORWARD
Routes the original message to a specified forward node instead of the destination indicated bythe GTT/ DB data. If the Forward node is not available, a configurable default action can be used.
26910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
This action could result in an error response (TCAP Error or UDTS), silent discard, or routing basedon default GTT/DB data.
The GTT Actions framework allows the creation of a GTT Action Set, which is a list of actions that areperformed on a message. A GTT Action ID is used to define the action and its characteristics.
The GTT Actions framework also provides the following capabilities:
• Advanced GTT Modification Enhancements
Data, including Calling Party data, used to configure the Advanced GTT Modification (AMGTT)feature is maintained in a new GT Modification (GTMOD) table.
The AMGTT feature is also enhanced to allow deletion of a trailing 0 in the Global Title Address(GTA) during GTT modification if the conversion from GTI(x)=2 to GTI(x)=4 occurs. Encodingscheme (ES) calculations are performed on the remaining digits after the 0 is deleted.
• Non-overlapped GTT Selectors
ITU GTT selectors (i.e ITU-I, ITU-N, ITU-N24, ITU-I Spare and ITU-N Spare) with different domainscan be provisioned for the same GTI value and translation type (TT) independently.
• Per-Path Measurements
Per-Path measurements, the equivalent of the EGMS Per-Path measurements, can be performedby GTT. These measurements provide counts for GTT Actions that match a pre-defined combinationof CgPA GTA, CdPA GTA, and Opcode values. This functionality is not specific to FLOBR or GTTActions, but can be specified for any GT translation. If CdPA-only GTT is the only service turnedon, having per-path measurements is not applicable, since there is no searching on CgPA or Opcode.
• Reference Count for GTTSETs
The response of the dlt-gttset command is enhanced by maintaining an internal reference countfor each GTTSET. When a GTTSET is referenced or de-referenced, the reference count for thatGTTSET is incremented or decremented by 1.
• Support of xlat=none Translations
A GT entry containing GTT Action or GT Modification data can be provisioned when translationdata is not present. This ability also allows loadsharing of message-relayed EPAP-based features.If xlat=none is provisioned, then both an MRN set and a MAP set can be provisioned against thetranslation.
• Unique GTT Selectors
GTT Selectors with ITU-I Spare and ITU-N Spare domains can be provisioned using theent/chg/dlt/rtrv-tt and ent/chg/dlt/rtrv-gttsel commands.
Feature Control Requirements
• A FAK for the desired Part Number:
• GTT Action - DISCARD: 893-0275-01• GTT Action - DUPLICATE: 893-0276-01• GTT Action - FORWARD: 893-0375-01
• The Enhanced GTT (EGTT) feature bit must be turned on before any of the GTT Action featurescan be turned on.
• The GTT Action features cannot be turned off after they have been turned on.
27910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
• A temporary FAK cannot be used to enable any of the GTT Action features.
Hardware Requirements
The GTT Actions framework requires DSM or E5-SM4G cards running the SCCP application.
Note: The GTT Action - DUPLICATE feature requires E5-SM4G cards. If a DSM card is present in thesystem, then the GTT Action - DUPLICATE feature cannot be enabled. If a DSM card is inserted inthe system after the GTT Action - DUPLICATE feature is enabled, then the card will auto-inhibit.
Commands
• rept-stat-sccp—Enhanced to display the status of Service Module cards that have stoppedprocessing the GTT Duplicate action.
rept-stat-sccp tekelecstp 10-08-17 13:35:38 EST EAGLE 42.0.0 SCCP SUBSYSTEM REPORT IS-ANR Active ----- SCCP ALARM STATUS = ** 0262 GTT Duplicate Actn processing stopped
SCCP Cards Configured= 9 Cards IS-NR= 8 System Daily Peak SCCP Load 30147 TPS 35-01-02 13:33:36 System Overall Peak SCCP Load 30147 TPS 35-01-02 13:33:36 System Total SCCP Capacity 54400 TPS (54400 max SCCP Capacity) System SCCP Capacity Calc. Method (N) System TPS Alarm Threshold 43520 TPS ( 80% System N SCCP Capacity)
CARD VERSION PST SST AST MSU CPU USAGE USAGE ------------------------------------------------------------------ 1201 036-027-001 IS-NR Active ----- 0% 1% 1203 036-027-001 IS-NR Active ----- 0% 3% 1205 036-027-001 IS-NR Active ----- 0% 2% 1211 036-027-001 IS-NR Active ----- 0% 3% 1213 036-027-001 IS-NR Active ----- 74% 38% 1215 036-027-001 IS-NR Active ----- 100% 42% 1217 036-027-001 IS-NR Active ----- 100% 40% 1101 036-027-001 IS-NR Active ----- 100% 42% 1107 ----------- OOS-MT Isolated ----- 0% 0% ------------------------------------------------------------------ SCCP Service Average MSU Capacity = 46% Average CPU Capacity = 21%
AVERAGE CPU USAGE PER SERVICE: GTT = 10%
TOTAL SERVICE STATISTICS: FAIL REROUTE\ FORWARD SERVICE SUCCESS ERRORS RATIO WARNINGS TO GTT TOTAL GTT: 898797 0 0% - - 898797
CARDS NOT PROCESSING GTT DUPLICATE ACTION: 1215, 1217, 1101
Command Completed.;
• act-upgrade—Enhanced to support the GTMOD table.• chg/rtrv-mtc-measopts—Enhanced to support GTT Action per path measurements.
See the Commands section for the ANSI41 AIQ feature for an example of the rtrv-mtc-measoptscommand output.
• chg/rtrv-sccpopts—Enhanced to support performing GTT Selector searches on overlappedselectors.
28910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
rtrv-sccpopts tekelecstp 10-04-06 15:11:29 EST Eagle 42.0.0 SCCP OPTIONS ------------------------------- CLASS1SEQ off CCLEN 0 ACLEN 0 INTLUNKNNAI no DFLTGTTMODE CdPA MTPRGTT off MTPRGTTFALLBK mtproute UNQGTTSEL bestmatch
;
• enable/chg/rtrv-ctrl-feat—Enhanced to enable, turn on, and display the status of the GTTAction - DUPLICATE, GTT Action - DISCARD, and GTT Action - FORWARD features. Theenable-ctrl-feat command is also enhanced to remove the feature dependencies for the MTPMSGS for SCCP Apps feature.
rtrv-ctrl-featrlghncxa03w 10-02-01 16:40:40 EST EAGLE 42.0.0
The following features have been permanently enabled: Feature Name Partnum Status Quantity HC-MIM SLK Capacity 893012707 on 64 Command Class Management 893005801 on ---- LNP Short Message Service 893006601 on ---- MNP Circ Route Prevent 893007001 on ---- XGTT Table Expansion 893006101 on 400000 XMAP Table Expansion 893007710 on 3000 Large System # Links 893005911 on 2800 Routesets 893006403 on 8000 EAGLE5 Product 893007101 on ---- EAGLE Product 893007201 off ---- IP7 Product 893007301 off ---- Network Security Enhance 893009101 off ---- Telnet 893005701 on ---- LNP ELAP Configuration 893010901 on ---- LNP ported TNs 893011036 on 384000000 LNP ported LRNs 893010501 on 200000 LNP ported NPANXXs 893009402 on 350000 15 Minute Measurements 893012101 off ---- EIR 893012301 on ---- EAGLE OA&M IP Security 893400001 off ---- SCCP Conversion 893012001 on ---- SE-HSL SLK Capacity 893013005 on 32 GTT Action - DISCARD 893027501 on ---- GTT Action - DUPLICATE 893027601 on ---- GTT Action - FORWARD 893037501 on ----
;
• ent/chg/dlt/rtrv-gta—Enhanced to support GTT Action Sets and GT Modification data.Support for the ngti, nnai, nnp, npdd, npds, nsdd, nsds, and rmgtt parameters is removed fromthe -gta commands and added to the -gtmod commands. The rtrv-gta command output isenhanced to increase readability.
Example 1 displays GTAs for a specified GTT set.rtrv-gta:gttsn=ansi tekelecstp 10-02-04 08:29:15 EST EAGLE 42.0.0
GTTSN NETDOM NDGT ansi ansi 10
GTA table is (17 of 1000000) 1% full.;
29910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
tekelecstp 10-02-04 08:29:16 EST EAGLE 42.0.0
START GTA END GTA XLAT RI PCA 8005550000 8005551999 DPCSSN SSN 001-254-255 SSN=255 CCGT=no GTMODID=gtmodset9 TESTMODE=off ACTSN=--------- PPMEASREQD= NO 8005552000 8005553999 DPCNGT GT 001-254-255 SSN=255 CCGT=no GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 8005554000 8005555999 DPCNGT GT 001-254-255 SSN=255 CCGT=no GTMODID=gtmodset6 TESTMODE=off ACTSN=--------- PPMEASREQD= NO 8005558000 8005559999 DPCSSN SSN 001-254-255 SSN=255 CCGT=yes GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 9195551212 9195551212 DPCSSN SSN 008-001-001 SSN=222 CCGT=no GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 9762428487 9762428487 DPCNGT GT 001-254-255 SSN=222 CCGT=no GTMODID=gtmodset4 TESTMODE=off ACTSN=--------- PPMEASREQD= NO 9766423277 9766423277 DPCSSN SSN 001-254-255 SSN=222 CCGT=no GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO
Command Retrieved 7 Entries
;
Example 2 displays output when a digit string of maximum length is used.rtrv-gta:gttssn=setnat003 tekelecstp 10-02-24 08:29:15 EST EAGLE 42.0.0
GTTSN NETDOM NDGT setnat003 itu 6,11,21
GTA table is (10 of 269999) 1% full.; tekelecstp 10-02-24 08:29:16 EST EAGLE 42.0.0
START GTA END GTA XLAT RI PC 123456 123456 DPCSSN GT s-00128-aa SSN=10 CCGT=no GTMODID=asetnat6 TESTMODE=off ACTSN=--------- PPMEASREQD= NO 234567 234567 DPCNGT GT s-00124-aa SSN=--- CCGT=no GTMODID=asetnat3 TESTMODE=off ACTSN=--------- PPMEASREQD= NO 234568 234568 DPC GT s-00124-aa SSN=--- CCGT=no GTMODID=asetnat7 TESTMODE=off ACTSN=--------- PPMEASREQD= NO 234569 234569 DPC GT s-00124-aa SSN=--- CCGT=no GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 12345678901 23456789012 DPCSSN SSN s-00124-aa SSN=10 CCGT=no GTMODID=asetnat4 TESTMODE=off ACTSN=--------- PPMEASREQD= NO 334569467213456789012 334569478932012345678 DPC GT s-00124-aa SSN=--- CCGT=no GTMODID=asetnat4 TESTMODE=off ACTSN=--------- PPMEASREQD= NO
30910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
987656789012345678901 987657321098765432101 DPCNGT GT s-00124-aa SSN=--- CCGT=no GTMODID=asetnat9 TESTMODE=off ACTSN=--------- PPMEASREQD= NO 987658321198765432101 987658321198765432101 DPCNGT GT s-00128-aa SSN=--- CCGT=no GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 987658321198765432102 990123456789012345678 DPCNGT GT s-00124-aa SSN=--- CCGT=no GTMODID=asetnat1 TESTMODE=off ACTSN=--------- PPMEASREQD= NO
Command Retrieved 9 Entries
;
Example 3 displays output when an MRN set is provisioned, the Flexible GTT Loadsharing andIntermediate GTT Loadsharing features are on, and a GTT Action feature is enabled.rtrv-gta:gttsn=setssnn tekelecstp 10-02-104 09:49:42 EST EAGLE 42.0.0
GTTSN NETDOM NDGT setssnn ansi 10
GTA table is (1 of 269999) 1% full.; tekelecstp 10-02-104 09:49:43 EST EAGLE 42.0.0
START GTA END GTA XLAT RI PCA 1111111111 1111111111 DPC GT 001-001-003 MRNSET=1 SSN=--- CCGT=no GTMODID=asetans1 TESTMODE=off ACTSN=--------- PPMEASREQD= NO
Command Retrieved 1 Entries
;
Example 4 displays output when the Origin Based SCCP Routing (OBSR) feature is enabled.rtrv-gta:gttsn=setcdpa tekelecstp 10-02-04 09:49:42 EST EAGLE 42.0.0
GTTSN NETDOM SETTYPE NDGT setcdpa itu CDGTA 6
GTA table is (15 of 269999) 1% full.; tekelecstp 10-02-04 09:49:42 EST EAGLE 42.0.0
START GTA END GTA XLAT RI PC 106399 106489 DPCNGT GT 1-200-1 SSN=--- CCGT=no GTMODID=modset1 TESTMODE=off OPTSN=SETCG1 CGSELID=----- OPCSN=--------- ACTSN=--------- PPMEASREQD= NO 306399 306489 DPCNGT GT 1-200-1 SSN=--- CCGT=no GTMODID=modset3 TESTMODE=off OPTSN=CGPCSET01 CGSELID=----- OPCSN=OPCSET001 ACTSN=--------- PPMEASREQD= NO 400000 406489 NONE GTMODID=--------- TESTMODE=off OPTSN=--------- CGSELID=----- OPCSN=--------- ACTSN=asetudts PPMEASREQD= NO 500000 506489 NONE GTMODID=--------- TESTMODE=off OPTSN=--------- CGSELID=----- OPCSN=--------- ACTSN=asetdisc PPMEASREQD= NO 600001 600009 DPCSSN SSN -----------
31910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
SSN=125 CCGT=no GTMODID=modset5 TESTMODE=off OPTSN=--------- CGSELID=65500 OPCSN=OPCSET001 ACTSN=--------- PPMEASREQD= NO
Command Retrieved 5 Entries
;
Example 5 displays output for an OPC entry when the OBSR feature is enabled.rtrv-gta:gttsn=setopc eagle1 10-02-10 11:14:52 EST EAGLE 42.0.0
GTTSN NETDOM SETTYPE NDGT setopc ansi OPC -
GTA table is (3 of 269999) 1% full.
OPCA XLAT RI PCA 001-001-001 DPC GT 001-001-001 SSN=--- CCGT=no GTMODID=set1 TESTMODE=off OPTSN=--------- CGSELID=----- ACTSN=--------- PPMEASREQD= NO
Command Retrieved 1 Entries
;
Example 6 displays output for a CgPA SSN entry when the OBSR feature is enabled and an ITUPoint Code is used.rtrv-gta:gttsn=setssnn eagle1 10-05-10 12:01:08 EST EAGLE 42.0.0
GTTSN NETDOM SETTYPE NDGT setcgssn2 itu CGSSN -
GTA table is (5 of 269999) 1% full.
START SSN END SSN XLAT RI ITU PC 9 9 DPCNGT GT 2-002-2 SSN=--- CCGT=no GTMODID=--------- TESTMODE=off OPTSN=--------- CGSELID=----- ACTSN=--------- PPMEASREQD= NO
Command Retrieved 1 Entries
;
Example 7 displays output when loopset data is provisioned.rtrv-gta:gttsn=setssn:mapset=6 tekelecstp 10-02-04 09:50:42 EST EAGLE 42.0.0
GTTSN NETDOM NDGT setssnn ansi 10
GTA table is (42 of 269999) 1% full.; tekelecstp 10-02-04 09:50:42 EST EAGLE 42.0.0
START GTA END GTA XLAT RI PCA 1111111111 1111111122 DPCSSN SSN 001-001-003 MAPSET=6 SSN=2 CCGT=no GTMODID=--------- TESTMODE=off LOOPSET = loop1 ACTSN=--------- PPMEASREQD= NO
32910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Command Retrieved 1 Entries
;
Example 8 displays output for GTAs containing a specific point code. Both MAP sets and MRNsets are provisioned.rtrv-gta:gttsn=setans001:pc=1-1-3e1040501 10-02-04 14:25:57 EST EAGLE 42.0.0
GTTSN NETDOM SETTYPE NDGT setans001 ansi CDGTA 3,6
GTA table is (61 of 269999) 1% full.
;
e1040501 10-02-04 14:25:58 EST EAGLE 42.0.0
START GTA END GTA XLAT RI PCA 101 101 DPCSSN SSN 001-001-003 MAPSET=DFLT SSN=10 CCGT=no CGGTMOD=NO GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 104 104 DPCSSN SSN 001-001-003 MAPSET=DFLT SSN=10 CCGT=no CGGTMOD=NO GTMODID=gtmodset5 TESTMODE=off ACTSN=--------- PPMEASREQD= NO 105 105 DPCSSN SSN 001-001-003 MAPSET=1 SSN=14 CCGT=no CGGTMOD=NO GTMODID=gtmodset4 TESTMODE=off ACTSN=--------- PPMEASREQD= NO 111260 111260 DPCSSN SSN 001-001-003 MAPSET=DFLT SSN=12 CCGT=no CGGTMOD=NO GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 111261 111261 DPCSSN SSN 001-001-003 MAPSET=DFLT SSN=12 CCGT=no CGGTMOD=NO GTMODID=gtmodset4 TESTMODE=off ACTSN=--------- PPMEASREQD= NO 111262 111262 DPCSSN SSN 001-001-003 MAPSET=DFLT SSN=12 CCGT=no CGGTMOD=NO GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 111263 111263 DPCSSN SSN 001-001-003 MAPSET=DFLT SSN=12 CCGT=no CGGTMOD=NO GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 111264 111264 DPCSSN SSN 001-001-003 MAPSET=DFLT SSN=12 CCGT=no CGGTMOD=NO GTMODID=gtmodset7 TESTMODE=off ACTSN=--------- PPMEASREQD= NO 111265 111265 DPCNGT GT 001-001-003 MRNSET=DFLT SSN=--- CCGT=no CGGTMOD=NO GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 111266 111266 DPCNGT GT 001-001-003 MRNSET=DFLT SSN=--- CCGT=no CGGTMOD=NO GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 111267 111267 DPCNGT GT 001-001-003 MRNSET=DFLT SSN=--- CCGT=no CGGTMOD=NO GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO
Command Retrieved 11 Entries
;
Example 9 displays output for an SSN range.
33910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
rtrv-gta:gttsn=cgssnset1 e1040501 10-02-04 14:10:41 EST EAGLE 42.0.0
GTTSN NETDOM SETTYPE NDGT cgssnset1 ansi CGSSN -
GTA table is (50 of 269999) 1% full.
;
e1040501 10-02-04 14:10:42 EST EAGLE 42.0.0
START SSN END SSN XLAT RI PCA 1 1 DPC SSN 001-001-002 MAPSET=2 SSN=0 CCGT=no CGGTMOD=NO GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 34 34 DPC SSN 001-001-002 MAPSET=2 SSN=0 CCGT=no CGGTMOD=NO GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 100 100 DPC SSN 001-001-002 MAPSET=2 SSN=0 CCGT=no CGGTMOD=NO GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 101 101 DPC SSN 001-001-002 MAPSET=2 SSN=0 CCGT=no CGGTMOD=NO ACTSN=--------- PPMEASREQD= NO GTMODID=--------- TESTMODE=off 102 102 DPC SSN 001-001-002 MAPSET=2 SSN=0 CCGT=no CGGTMOD=NO GTMODID=--------- TESTMODE=off ACTSN=--------- PPMEASREQD= NO 103 103 NONE MAPSET=2 MRNSET=DFLT CGGTMOD=NO GTMODID=--------- TESTMODE=off ACTSN=actudts1 PPMEASREQD= YES 104 104 NONE MAPSET=2 MRNSET=DFLT CGGTMOD=NO GTMODID=--------- TESTMODE=off ACTSN=actdisc1 PPMEASREQD= NO
Command Retrieved 7 Entries
;
Example 10 displays output when the OBSR feature is enabled and the FLOBR feature is turnedon.rtrv-gta:gttsn=setans006 tekelecstp 10-02-04 16:20:44 EST EAGLE 42.0.0
GTTSN NETDOM SETTYPE NDGT setans006 ansi CDGTA 6
GTT TABLE IS 1 % FULL (3 of 269999); tekelecstp 10-02-04 16:20:45 EST EAGLE 42.0.0
START GTA END GTA XLAT RI PCA 123456 123456 DPC GT 001-001-002 MRNSET=NONE SSN=--- CCGT=no CGGTMOD=NO GTMODID=gtmod3 TESTMODE=on LOOPSET = none FALLBACK=Yes OPTSN=--------- CGSELID=456 CDSELID=----- OPCSN=setopc001 ACTSN=--------- PPMEASREQD= NO
;
34910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Example 11 displays output for a CdPA SSN entry when the FLOBR feature is enabled.rtrv-gta:gttsn=setcdssn tekelecstp 10-02-04 09:49:42 EST EAGLE 42.0.0
GTTSN NETDOM SETTYPE NDGT setcdssn itu CDSSN -
GTT TABLE IS 1 % FULL (5 of 269999);
tekelecstp 10-02-04 09:49:42 EST EAGLE 42.0.0
START SSN END SSN XLAT RI PC 100 200 DPCNGT GT 1-200-1 SSN=0 CCGT=no GTMODID=gtmod3 TESTMODE=on FALLBACK=sysdflt CGCNVSN=--------- OPTSN=--------- CGSELID=----- CDSELID=----- ACTSN=--------- PPMEASREQD= NO
Command Retrieved 1 Entries
;
Example 12 displays output when an OPCODE entry is retrieved for the TOBR feature.rtrv-gta:gttsn=opcode2 tekelecstp 10-02-04 23:34:43 EST EAGLE 42.0.0
GTTSN NETDOM SETTYPE NDGT opcode2 itu OPCODE -
GTA table is (3 of 269999) 1% full.
FAMILY OPCODE PKGTYPE XLAT RI PC
ACN OPCODE PKGTYPE XLAT RI PC 1-2-3 5 cnt DPC GT 3-003-3 SSN=0 CCGT=no GTMODID=--------- TESTMODE=off FALLBACK=sysdflt OPTSN=--------- CGSELID=----- CDSELID=----- OPCSN=--------- ACTSN=--------- PPMEASREQD= NO
Command Retrieved 1 Entries
;
Example 13 retrieves GT Modification ID entries.rtrv-gta:gttsn=setcdgta:xlat=none:gtmodid=gttid1 e1040501 10-02-04 14:25:57 EST EAGLE 42.0.0
GTTSN NETDOM NDGT setcdgta ansi 6
GTA table is (1 of 269999) 1% full.; e1040501 10-02-04 14:25:57 EST EAGLE 42.0.0
START GTA END GTA XLAT RI PC 981234 981234 NONE CGGTMOD=YES GTMODID=gttid1 TESTMODE=off LOOPSET = none ACTSN=actudts1 PPMEASREQD= YES
Command Retrieved 1 Entries
35910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
• ent/chg/dlt/rtrv-gtmod—Added to provision GT Modification data and data for the AMGTTfeature.
Example 1 displays output when all GT Modification data is requested.rtrv-gtmod tekelecstp 10-02-10 14:43:31 EST EAGLE 42.0.0
GTMODID NTT NGTI GT0FILL NNP NNAI NPDD NSDD PRECD CGPASSN set1 -- -- OFF 0 -- -- -- PFX 254 NPDS= NSDS= set2 -- 4 ON 12 3 3 11 SFX -- NPDS=01234567890 NSDS=0987654321
GTMOD table is (2 of 100000) 1% full.;
Example 2 displays output when the Reference Count is provisioned.rtrv-gtmod:on=refcnt tekelecstp 10-02-10 14:43:31 EST EAGLE 42.0.0
GTMODID NTT NGTI GT0FILL NNP NNAI NPDD NSDD PRECD CGPASSN REFCNT set1 5 4 OFF 0 -- -- -- PFX 254 5 NPDS= NSDS= set2 -- 4 ON 12 3 3 11 SFX 0 NPDS=01234567890 NSDS=0987654321
GTMOD table is (2 of 100000) 1% full.;
• ent/chg/dlt/rtrv-gtt—Enhanced to support GT Modification and unique selector data.Support for the ngti, nnai, nnp, npdd, npds, nsdd, nsds, and rmgtt parameters is removed fromthe -gtt commands and added to the -gtmod commands.
Example 1 shows retrieval of all GTTs for a specified type.rtrv-gtt:type=7 tekelecstp 10-02-04 11:43:04 EST EAGLE 42.0.0
TYPEA TTN NDGT 7 isvm 3,6,7,10
GTT table is (17 of 1000000) 1% full.
START GTA END GTA XLAT RI PCA 564 564 DPCNGT GT 248-006-015 SSN=245 GTMODID=asetansi4 641 641 DPCNGT GT 248-006-015 SSN=245 GTMODID=--------- 589234 598744 DPCNGT GT 248-006-015 SSN=245 GTMODID=asetansi4 648392 659832 DPCSSN SSN 248-006-015 SSN=245 GTMODID=---------
Command Retrieved 4 Entries;
Example 2 displays output when the SCCP Conversion feature is enabled.rtrv-gtt:type=4:cggtmod=yes tekelecstp 10-02-04 11:43:04 EST EAGLE 42.0.0 TYPE TTN NDGT 7 isvm 3,6,7,10
GTT table is (17 of 1000000) 1% full.
START GTA END GTA XLAT RI ITUN24 PC 764 864 DPCNGT GT 002-136-005 SSN=245 GTMODID=amitu43 CGGTMOD = NO
36910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
668392 689832 DPCSSN SSN 007-006-005 SSN=245 GTMODID=--------- CGGTMOD = NO
Command Retrieved 2 Entries
;
Example 3 displays output when the FGTTLS feature is turned on.rtrv-gtt:ttn=tbl1 tekelecstp 10-02-04 13:54:32 EST EAGLE 42.0.0 TYPEA TTN NDGT 1 tbl1 10
GTT table is (1 of 269999) 1% full.
START GTA END GTA XLAT RI PCA 1234567890 1234567890 DPC GT 001-001-002 MRNSET=NONE SSN=--- GTMODID=mod3
Command Retrieved 1 Entries
;
Example 4 displays output when the FGTTLS and OBSR features are turned on.rtrv-gtt:ttn-tbla tekelecstp 10-02-24 14:51:59 EST EAGLE 42.0.0 TYPEA TTN NDGT 6 tbla 6,10
GTA table is (61 of 269999) 1% full
e1040501 10-02-24 13:33:10 EST EAGLE 42.0.0
START GTA END GTA XLAT RI ITU PC 123456 123456 DPC GT 1-101-1 MRNSET=DFLT SSN=--- GTMODID=--------- CGGTMOD = NO
Command Retrieved 1 Entries
;
Example 5 displays output when Loopset data are provisioned.rtrv-gtt:type=4:cggtmod=yes tekelecstp 10-02-24 16:21:15 EST EAGLE 42.0.0 TYPEA TTN NDGT 4 -------- 6
GTT table is (1 of 269999) 1% full.
START GTA END GTA XLAT RI PCA 981234 981234 DPC GT 001-001-001 MRNSET=DFLT SSN=--- GTMODID=asetans CGGTMOD = YES LOOPSET = none
Command Retrieved 1 Entries
;
• ent/chg/dlt/rtrv-gttact—Added to provision GTT Action data. The action specified in theentry determines the process that is performed on an MSU during translation.
Example 1 displays output for a specified reference count. The Loopset feature is enabled.rtrv-gttact:on=refcnt tekelecstp 10-02-04 18:21:01 EST EAGLE 42.0.0
ACTID ACTION ATCAPERR ITCAPERR UDTSERR UIMREQD REFCNT ------------------------------------------------------------
37910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
act2 disc --- --- --- off 0 none1 disc --- --- --- off 0
ACTID ACTION PCA RI SSN MRNSET MAPSET REFCNT --------------------------------------------------------------------------- actdup1 dup 001-001-001 gt --- DFLT ----- 2 CDGTMODID = --------- CGGTMODID = --------- LOOPSET = None USEICMSG = off CGPCOGMSG = dflt CGPCA = --- actfwd1 fwd 001-001-001 gt --- DFLT ----- 2 CDGTMODID = --------- CGGTMODID = --------- LOOPSET = None DEFACTID = Fallback USEICMSG = off CGPCOGMSG = dflt CGPCA = ---
ACTID ACTION PCI RI SSN MRNSET MAPSET REFCNT ---------------------------------------------------------------------------
ACTID ACTION PCN RI SSN MRNSET MAPSET REFCNT ---------------------------------------------------------------------------
ACTID ACTION PCN24 RI SSN MRNSET MAPSET REFCNT ---------------------------------------------------------------------------
GTT-ACT table is (4 of 2000) 1% full.
;
Example 2 displays output when the reference count is not provisioned.rtrv-gttact:cggtmodid=set1 tekelecstp 10-02-04 18:21:01 EST EAGLE 42.0.0
ACTID ACTION PCI RI SSN MRNSET MAPSET --------------------------------------------------------------------- actdup2 DUP 002-002-002 GT --- 2000 ----- CDGTMODID = set2 CGGTMODID = set1
ACTID ACTION PCN24 RI SSN MRNSET MAPSET --------------------------------------------------------------------------- actdup6 DUP 111-222-333 SSN 100 ---- 3000 CDGTMODID = id9 CGGTMODID = set1
GTT Action table is (8 of 2000) 1% full
;
• ent/chg/dlt/rtrv-gttapath—Added to provision GTT Action Path entries, which consist of"setname+value" pairs.
rtrv-gttapath tekelecstp 10-02-04 18:29:41 EST EAGLE 42.0.0
GTTPN OPGTTSN CGGTTSN CDGTTSN ---------------------------------------------------- path1 opsn1 --------- cdsn1 OPCODE = 123 PKGTYPE = ituuni ACN = 111-111-111-111-111-111-111 CGGTA = 7654 ECGGTA = 7654
path2 opsn2 cgsn2 --------- OPCODE = 124 PKGTYPE = ansiuni FAMILY = 2 CGGTA = 45673 ECGGTA = 45673
path3 opsn2 cgsn3 cdsn1 OPCODE = 124 PKGTYPE = ansiuni FAMILY = 2
38910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
CGGTA = 987654 ECGGTA = 999999 CDGTA = 123456 ECDGTA = 234567
GTT Action Path table is (3 of 10000) 1% full
Command Completed.;
• ent/chg/dlt/rtrv-gttaset—Added to provision GTT Action Sets, consisting of an ActionSet Name and a set of Action IDs, which determine the actions that are applied to the MSU duringtranslation.
rtrv-gttaset tekelecstp 10-02-04 18:21:01 EST EAGLE 42.0.0
ACTSN REFCNT TEST ActIds MODE -------------------------------- aset1 1 on dup1 (DUP),dup2 (DUP),dup3 (DUP), disc1 (DISC),------,------
aset2 5 off dup2 (DUP),dup1 (DUP),------, ------,------,------
aset3 10 on fwd1 FWD),dup4 (DUP),------, ------,------,------
aset4 0 off udts1 (UDTS),------,------, ------,------,------
aset5 0 off ------,tcaperr1 (TCAPERR),------, ------,------,------
GTT Action Set table is (5 of 20000) 1% full
;
• ent/chg/dlt/rtrv-gttsel—Enhanced to support the provisioning and display of unique andoverlapped GTT selectors.
rtrv-gttsel:ovrlapd=yes tekelecstp 10-05-03 17:19:03 EST EAGLE 42.0.0
GTI CG CDPA CGPA ANSI TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA INT TT NP NAI SSN SELID LSN GTTSET GTTSET *2 1 -- --- --- none any set1 (cdgta) ----- (--- )
GTI CG CDPA CGPA NAT TT NP NAI SSN SELID LSN GTTSET GTTSET *2 2 -- --- --- none any set1 (cdgta) ----- (--- )
GTI CG CDPA CGPA N24 TT NP NAI SSN SELID LSN GTTSET GTTSET *2 3 -- --- --- none any set1 (cdgta) ----- (--- )
GTI CG CDPA CGPA INTS TT NP NAI SSN SELID LSN GTTSET GTTSET
GTI CG CDPA CGPA NATS TT NP NAI SSN SELID LSN GTTSET GTTSET
;
39910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
• ent/chg/dlt/rtv-gttset—The chg-gttset command is enhanced to allow the GTT setname to be changed. The dlt/rtrv-gttset commands are enhanced to increment and displayan internal reference count for each GTT set.
rtrv-gttset:refcnt=yes tekelecstp 10-05-04 12:11:59 EST Eagle 42.0.0 GTTSN NETDOM REFCNT NDGT lidb ansi 0 10 t800 ansi 2 6 s_i000 itu 1 15 imsi itu 1 15 abcd1234 itu 0 12
GTT-SET table is (5 of 2000) 1% full.
;
• ent/dlt/rtrv-tt—Enhanced to support provisioning and display of unique GTT selectors.
rtrv-tt tekelecstp 10-05-03 09:03:09 EST EAGLE 42.0.0 TYPEA TTN NDGT 130 lidb 5 180 ansi180 9
ALIAS TYPEA 1 130 7 130 10 180
TYPEI TTN NDGT 105 intlabc 15 119 intl119 18
ALIAS TYPEI 29 119 33 105
TYPEN TTN NDGT 204 natlxyz 8 210 natl210 21
ALIAS TYPEN 7 204
TYPEN24 TTN NDGT
ALIAS TYPEN24
TYPEIS TTN NDGT 5 -------- 6
ALIAS TYPEIS
TYPENS TTN NDGT
ALIAS TYPENS
;
• ent/dlt-mrn—Enhanced to support the GTT Action table.• rept-ftp-meas—Enhanced to support GTT Actions Per-Path measurements• rtrv-tbl-capacity—Enhanced to support the GTT Action, GTT Action Set, GT Modification,
and GTT Path tables.
rtrv-tbl-capacity tekelecstp 10-02-09 13:57:06 EST EAGLE 42.0.0
40910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
DSTN table is ( 600 of 8000) 10% full XLIST table is ( 0 of 500) 0% full X25-DSTN table is ( 0 of 1024) 0% full SPC table is ( 0 of 40) 0% full LS table is ( 512 of 1024) 50% full SLK table is ( 1501 of 2800) 54% full X25-SLK table is ( 0 of 256) 0% full IP-LNK table is ( 0 of 512) 0% full IP-HOST table is ( 0 of 2048) 0% full MAP table is ( 1500 of 36000) 5% full MRN table is ( 0 of 3000) 0% full SCCPSRV table is ( 0 of 384) 0% full GTA table is ( 0 of 269999) 0% full GTT-SET table is ( 10 of 2000) 1% full SSNSELID table is ( 0 of 100000) 0% full SCRSET table is ( 25 of 255) 10% full RTEKEY table is ( 0 of 1000) 0% full APPLSOCK table is ( 0 of 4000) 0% full AS table is ( 0 of 250) 0% full VFLXCD table is ( 1 of 4950) 1% full VFLXRN table is ( 1 of 10000) 1% full VFLXVID table is ( 1 of 1000) 1% full NPP-AS table is ( 0 of 1024) 0% full NPP-SRS table is ( 0 of 8192) 0% full GTT-ACT table is ( 0 of 2000) 0% full GTT-ASET table is ( 0 of 20000) 0% full GTT-PATH table is ( 3 of 10000) 1% full GTMOD table is ( 1 of 100000) 1% full
;
• tst-msg—Enhanced to display GTT Action data.
tst-msg:msgn=4:feat=gtt:prot=sccp:loc=1101 tekelecstp 10-03-05 16:38:22 EST EAGLE 42.0.0
GTT Trace Tool:
Input: EAGLE-Generated? No OPCI = 1-001-4 LSN = ls4 DPCI = 1-001-1 SelId = -----
CDPA: GTI=2 TT=10 SSN=6 PCI=1-001-1 ADDR=9818316478
CGPA: GTI=2 TT=0 SSN=8 PCI=1-001-4 ADDR=12345
Family=9
Opcode=46
Pkgtype=bgn (0x62)
Acn= 1-2-3-4-5
GTT Search Results:
Search Hierarchy: FLOBR CGPA CDPA
CgPA/CdPA
GTT Set Name Set Type SELID TestMode FallBack Found Matching Key
41910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
setcdgta CDPA GTA ----- OFF Dft Y 9818316478
setcggta CGPA GTA ----- OFF Dft Y 12345
setcgpc CGPA PC ----- OFF Dft Y 1-001-4
Search Depth = 3 Loop Detected = No
Translation Results: Translation Found: Yes [GTT Set Name = setcgpc] DPCI = 1-001-5 RI = GT Action Set = setdup1 GTT user action: Discard MSU
Actid Action DPC RI SSN MAPSET/ ErrCode UIMREQD MRNSET
act1 DUP 1-001-4 GT --- DFLT ---- -
act2 DUP 1-001-4 GT --- DFLT ---- -
act3 DUP 1-001-4 GT --- DFLT ---- -
act4 DUP 1-001-5 GT --- DFLT ---- -
dup1 DUP 1-001-6 GT --- DFLT ---- -
disc1 DISC ---- --- --- ----- ---- Y
Command Complete ;
.
Measurements
GTT Action Per-TT Measurements
New registers are added in the existing per-TT Measurement report for GTT Actions. The measurementsare available on the Measurements Platform, the OAM, and the E5-OAM (with or without the E5-OAMIntegrated Measurements feature. These measurements provide support for per Translation Type reports.
The data are available at 30-minute intervals or 15-minute intervals if the 15-Minute Measurementsfeature is turned on.
Table 1: GTT Actions Measurements Pegs describes new measurement pegs for the GTT Actionsmeasurements. When a GTT Actions feature is on with a feature that does translation based on theCalled Party, the Per-TT pegs are updated. When a GTT Actions feature is on with the OBSR feature,which does translation based on the Calling Party, the Per-CGTT pegs are updated.
Table 1: GTT Actions Measurements Pegs
DescriptionPer-CGTTPer-TT
Total number messages discarded by the DISCARD GTT ActionCGGTTADISC0GTTADISC0
Total number messages discarded by the UDTS GTT ActionCGGTTADISC1GTTADISC1
Total number messages discarded by the TCAP Error GTT ActionCGGTTADISC2GTTADISC2
Total number of messages for which a a Duplicate MSU was sentCGGTTADUPGTTADUP
42910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
DescriptionPer-CGTTPer-TT
Total number messages discarded by the Forward GTT ActionCGGTTAFWDGTTAFWD
Total number of messages receiving any GTT actionCGGTTASETGTTASET
GTT Action System Wide and Per-Path Measurements
The GTT Actions system wide measurements contain the totals of all actions performed in the overallsystem for all of the Action Set IDs. The GTT Action per-path measurements provide measurementcounts for the GTT Actions applied to the messages that match a pre-defined combination of “CgPAGTA”, “CdPA GTA” and “Opcode” values.
Both of these reports are generated using a new GTTAPATH entity. These reports are available onMeasurement Control Platform and on the E5-OAM. These reports are not available on the OAM.
Note: The E5-OAM Integrated Measurements feature must be turned on before the measurements areavailable on the E5-OAM.
The reports are available at hourly and daily intervals.
The system wide and per-path measurements also use the registers defined for the per-TTmeasurements, except for the GTTASET register, which is not used by the per-path measurements.
A new GTTACTNA measurement peg is used for the per-path measurement reports. This peg measuresthe total number of messages for which no GTT action was successfully performed.
Limitations
High load conditions may occur if a major percentage (90% or higher) of MSUs are subjected to GTTActions functionality, and more than 2 Duplicate Actions are provisioned for each GTT Action set. Ifhigh load conditions occur when multiple Duplicate Actions are provisioned, then the E5-SM4G cardmay experience overload. The system monitors the processing load on the card, and will temporarilydisable Duplicate processing under these conditions. Only processing of GTT Duplicates is disabled:normal GTT routing, GTT Forward, and GTT Discard actions are not affected.
After the overload condition subsides, GTT Duplicate Action processing is restored. Alarms are usedto indicate when Duplicate Action processing is stopped and restored.
High-speed IMT Packet Router (HIPR2)
The HIPR2 card (Part Number 870-2872-01) supports enhanced capabilities in existing EAGLE 5 ISSshelves by increasing system throughput. The HIPR2 card allows the IMT inter-shelf bus to operateat 2.5 Gbps.
To operate at the 2.5 Gbps rate, all of the cards in the system must be HIPR2 cards, and the HIPR2High Rate Mode feature (Part Number 893-0201-01) must be turned on. If this feature is not turnedon, then the original throughput rate of 1 Gbps is used even if HIPR2 cards are used.
Note: When the HIPR2 High Rate Mode feature is turned on or off, an IMT Rate Change Sequenceoccurs. Certain commands cannot be performed during this sequence. Refer to Commands Manual formore information.
43910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Traffic between EAGLE 5 ISS cards on the same shelf is switched directly to the destination slot anddoes not transit to any other cards in the shelf. The HIPR2 card provides switched 125 Mbps IMTinterface to each slot in a shelf.
The HIPR2 card supports a new hipr2 GPL and hipr2 application.
Feature Control Requirements
• The HIPR2 High Rate Mode feature must be enabled and turned on (FAK for Part Number893-0201-01) for the system to operate at 2.5 Gbps.
• A temporary FAK cannot be used to enable the feature.• The feature can be turned on and off.
Hardware Requirements
• HIPR2 cards must be installed in all MUX locations in the EAGLE 5 ISS before the HIPR2 HighRate Mode feature can be turned on.
• A high-speed fiber-channel cable (Part Number 830-1344-xx) must be used to allow the HIPR2cards to run at 2.5 Gbps. This cable is included in the 890-0230-xx and 890-0231-xx cable kits.
• HIPR2 (Part Number 870-2872-01) is fully NEBS compliant. However, if ambient temperaturesabove 40° C are likely, Eagle Fan Trays (Part Number 890-0001-04) are recommended to ensureproper airflow to the upper HIPR2 cards in those shelves.
Commands
• act/init-flash—Enhanced to support the hipr2 GPL. The init-flash command cannot beentered during the IMT Rate Change sequence.
• act/chg/rept-stat/rtrv-gpl—Enhanced to support the hipr2 GPL.
Example 1 displays output for the rept-stat-gpl command.rept-stat-gpl:display=all rlghncxa03w 11-04-07 10:23:93 EST EAGLE 42.0.0
GPL CARD RUNNING APPROVED TRIAL EOAM 1113 027-002-000 027-002-000 ----------- BPDCM2 027-001-000 027-001-000 210-001-003 EOAM 1115 027-002-000 027-002-000 ----------- BPDCM2 027-001-000 027-001-000 210-001-003 VSCCP 1212 027-001-000 027-001-000 027-001-000 BPDCM 027-001-000 027-001-000 210-001-003 ATMANSI 1203 027-001-000 027-001-000 027-001-000 BPHCAP 027-001-000 027-001-000 210-001-003 SS7ML* 1105 027-001-000 027-001-000 027-001-000 BPMPL 230-001-001 230-001-001 230-001-001 IPLIM 1213 027-001-000 027-001-000 027-001-000 BPDCM 027-001-000 027-001-000 210-001-003 SS7IPGW 1215 027-001-000 027-001-000 027-001-000 BPDCM 210-001-003 ALM+ 027-001-000 210-001-003 BPHMUX 1109 027-005-000 027-005-000 027-005-000 BPHMUX 1110 027-005-000 027-005-000 027-005-000 BPHMUX 1209 027-005-000 027-005-000 027-005-000 BPHMUX 1210 027-005-000 027-005-000 027-005-000 HIPR2 1309 027-005-000 027-005-000 027-005-000 HIPR2 1310 027-005-000 027-005-000 027-005-000 OAP** A 027-001-000 027-001-000 ----------- OAP** B 027-001-001 ALM 027-001-000 ----------- Command Completed.;
44910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Example 2 displays abbreviated output for the rtrv-gpl command.rtrv-gpl e1080402 11-04-10 15:16:33 EST EAGLE 42.0.0
GPL CARD RELEASE APPROVED TRIAL REMOVE TRIAL EOAM 1114 128-003-000 128-003-000 128-003-000 128-003-000 EOAM 1116 128-003-000 128-003-000 ----------- ----------- SCCP 1114 128-002-000 128-002-000 128-002-000 128-002-000 SCCP 1116 128-002-000 128-002-000 128-002-000 ----------- VSCCP 1114 128-002-000 128-002-000 128-002-000 128-002-000 VSCCP 1116 128-002-000 128-002-000 128-002-000 ----------- MCP 1114 128-001-000 128-001-000 128-001-000 128-001-000 MCP 1116 128-001-000 128-001-000 128-001-000 ----------- BPHCAPT 1114 128-116-003 002-116-003 002-116-003 128-001-000 BPHCAPT 1116 002-116-003 002-116-003 002-116-003 ----------- PLDPMC1 1114 128-001-000 125-001-000 128-001-000 125-001-000 PLDPMC1 1116 128-001-000 125-001-000 128-001-000 ----------- OAP* A 128-001-000 125-001-000 ----------- 128-002-000 OAP* B 128-001-000 125-002-000 ALM ----------- ----------- ERTHC 1114 128-002-000 128-002-000 128-002-000 ----------- ERTHC 1116 128-002-000 128-002-000 128-002-000 128-002-000 SCCPHC 1114 128-019-000 128-019-000 128-019-000 ----------- SCCPHC 1116 128-019-000 128-019-000 128-019-000 128-019-000 BLBSMG 1114 128-007-000 128-007-000 128-007-000 ----------- BLBSMG 1116 128-007-000 128-007-000 128-007-000 128-007-000 HIPR2 1114 128-022-000 128-022-000 128-022-000 128-022-000 HIPR2 1116 128-022-000 128-022-000 128-022-000 -----------;
• act-upgrade—This command cannot be entered during an IMT Rate Change sequence.• alw/conn/disc/inh/rept-stat/tst-imt—These commands cannot be entered during an
IMT Rate Change Sequence.• chg/rtrv-th-alm—Enhanced to display IMT Bus alarms.
rtrv-th-alm tekelecstp 11-04-23 13:14:44 EST EAGLE 42.0.0 Thermal Alarm Level 1: 92% Thermal Alarm Level 2: 99% SCCP TPS Threshold: 80% SCCP Calculation Method: N LNP TN DB Alarm Level 1: 80% LNP TN DB Alarm Level 2: 95% GTT SCCP Service Alarm Level 1: 10% GTT SCCP Service Alarm Level 2: 20% Non-GTT SCCP Service Alarm Level 1: 10% Non-GTT SCCP Service Alarm Level 2: 20% SCCP Service Alarm Level 1 Interval: 15 SCCP Service Alarm Level 2 Interval: 50 IMT Bus Combined Utilization Alarm Level 1: 70% IMT Bus Combined Utilization Alarm Level 2: 80% IMT Bus Congestion Alarm Level 1: 60% IMT Bus Congestion Alarm Level 2: 75% RTRV-TH-ALM: MASP A - COMPLTD.
;
• enable/chg/rtrv-ctrl-feat—Enhanced to enable, turn on, and display the status of theHIPR2 High Rate Mode feature. The feature status cannot be changed during an IMT Rate Changesequence.
rtrv-ctrl-feat rlghncxa03w 11-04-29 16:40:40 EST EAGLE 42.0.0
The following features have been permanently enabled: Feature Name Partnum Status Quantity HC-MIM SLK Capacity 893012707 on 64 XGTT Table Expansion 893006101 on 400000
45910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
XMAP Table Expansion 893007710 on 3000 Large System # Links 893005910 on 2000 Routesets 893006403 on 8000 EAGLE5 Product 893007101 on ---- EAGLE Product 893007201 off ---- IP7 Product 893007301 off ---- Network Security Enhance 893009101 off ---- Telnet 893005701 on ---- HIPR2 High Rate Mode 893020101 on ---- 6-Way LS on Routesets 893019801 on ----
;
• flash/init/rept-stat-card—Enhanced to support and display HIPR2 cards. The flash-cardand init-card commands cannot be entered during an IMT Rate Change sequence.
Example 1 displays abbreviated output when the status of all cards is requested.rept-stat-card rlghncxa03w 11-04-04 12:57:21 EST EAGLE5 42.0.0
CARD VERSION TYPE GPL PST SST AST 1101 125-020-000 TSM GLS IS-NR Active ----- 1102 128-002-000 LIMATM ATMHC IS-NR Active ----- 1103 125-020-000 DSM VSCCP IS-NR Active ----- 1105 125-020-000 DSM VSCCP IS-NR Active ----- 1106 130-001-000 TSM GLSHC IS-NR Active ----- 1107 125-020-000 STC EROUTE IS-NR Active ----- 1109 125-020-000 HMUX BPHMUX IS-NR Active ----- 1110 125-020-000 HMUX BPHMUX IS-NR Active ----- 1209 125-020-000 HMUX BPHMUX IS-NR Active ----- 1210 125-020-000 HMUX BPHMUX IS-NR Active ----- 1309 125-017-000 HIPR HIPR IS-NR Active ----- 1310 125-017-000 HIPR HIPR IS-NR Active ----- 1311 125-020-000 STC EROUTE IS-NR Active ----- 1313 125-020-000 DCM STPLAN IS-NR Active ----- 2101 104-002-000 LIMV35 CCS7ITU IS-NR Active ----- 2103 128-018-000 DCM IPLHC IS-NR Active ----- 2107 104-001-000 LIMCH CCS7ITU IS-NR Active ----- 2108 128-018-000 DCM SLANHC IS-NR Active ----- 2109 128-022-000 HIPR2 HIPR2 IS-NR Active ----- 2110 128-022-000 HIPR2 HIPR2 IS-NR Active ----- 2111 128-018-000 STC ERTHC IS-NR Active ----- 1413 053-000-058 E5ENET IPSG IS-NR Active ----- Command Completed.;
Example 2 displays the output when the status of a HIPR2 card is requested. In this example, thecard does not support thermal monitoring.rept-stat-card:loc=2109 rlghncxa03w 11-04-04 15:10:19 EST EAGLE 5 42.0.0 CARD VERSION TYPE GPL PST SST AST 2109 128-022-000 HIPR2 HIPR2 IS-NR Active ----- ALARM STATUS = No Alarms. TRIAL VERSION = HIPR2 023-099-008 FPGA VERSION = HIPR2 008-001-003-002 CURRENT TEMPERATURE = NA PEAK TEMPERATURE: = NA
Command Completed.;
• init/rept-stat-mux—Enhanced to reset 1 or all HIPR2 cards on a specified IMT bus and listthe status of HIPR2 cards. The init-mux command cannot be entered during an IMT Rate Changesequence.
46910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
rept-stat-mux Command entered at terminal #4. CARD TYPE PST SST AST BITRATE BITRATE (OPER) (ACT) ------------------------------------------------------------------------ 1109 HMUX IS-NR Active ALMINH LOW LOW 1110 HMUX IS-NR Active ----- LOW LOW 1209 HIPR IS-NR Active ALMINH LOW LOW 1210 HIPR IS-NR Active ----- LOW LOW 1309 HIPR2 IS-NR Active ALMINH LOW LOW 1310 HIPR2 IS-NR Active ----- LOW LOW
Command Completed. ;
• init/rept-stat-sys—Enhanced to include HIPR2 status in the MUX Card field. The init-syscommand cannot be entered during an IMT Rate Change sequence.
• rept-imt-info—Enhanced to support the HIPR2 card.• rtrv-obit—Enhanced to include HIPR2 cards in the obituary from an IXP-based processor card.• rtrv-stp—Enhanced to support the hipr2 GPL.
Example 1 displays output when configuration information for all frames of the STP is requested.rtrv-stp tekelecstp 11-04-30 11:07:17 EST EAGLE 42.0.0 Card Part Number Rev Serial Number Type DB APPL GPL Version ---- ----------- --- ------------- ---- -- ---- ----------- 1101 870-1275-01 W 10245689323 DSM 4096M VSCCP 027-010-000 1102 Empty 1103 870-1788-03 A 10234658345 TSM 128M GLS 027-010-000 1104 Empty 1105 870-1339-06 A 10274568974 LIMATM - ATMANSI 027-010-000 1106 Empty DSM VSCCP 1107 870-2212-02 A 10206265084 DCM 512M STPLAN 128-002-000 1108 870-1456-05 A 10204764378 DCM 512M SS7IPGW 027-010-000 1109 870-2877-01 A 10207185554 HIPR2 HIPR2 128-023-000 1110 870-2877-01 A 10207185554 HIPR2 HIPR2 128-023-000 1111 870-1788-05 A 10205734657 MCPM 2048M MCP 027-010-000 1112 870-1789-04 A 10302135627 LIMDS0 - SS7ANSI 027-010-000 1113 870-2360-01 A 10346357678 GPSM 1024M EOAM 025-340-000 1114 TDM 1115 Unavailable GPSM EOAM 1116 Unavailable 1117 MDAL 1118 Empty
1201 870-1339-06 A 10245667974 LIMATM - ATMANSI 027-010-000 1202 Empty 1203 870-1789-04 A 10302135777 LIMDS0 - SS7ANSI 027-010-000 1204 Empty 1205 870-1275-01 W 10246789323 DSM 4096M VSCCP 027-010-000 1206 Empty 1207 Empty DCM SS7IPGW 1208 870-1456-05 A 10204764222 DCM 512M SS7IPGW 027-010-000 1209 MUX BPHMUX 027-345-000 1210 MUX BPHMUX 027-345-000 1211 870-1788-05 A 10205737777 MCPM 2048M MCP 027-010-000 1212 870-1788-03 A 10234632455 TSM 128M GLS 027-010-000 1213 Empty 1214 Auto-Inhibit IPSM IPS 1215 870-1788-05 A 10205736734 MCPM 2048M MCP 027-010-000 1216 870-1789-04 A 10302135655 LIMDS0 - SS7ANSI 027-010-010 1217 Empty 1218 Empty . . . 6118 870-2453-06 A 10444135655 LIMATM - ATMANSI 028-010-000
47910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Command Completed.;
Example 2 displays the output when information for a particular shelf is requested.rtrv-stp:shelf=1100 tekelecstp 11-04-30 11:07:17 EST EAGLE 42.0.0
Card Part Number Rev Serial Number Type DB APPL GPL Version ---- ----------- --- ------------- ---- -- ---- ----------- 1101 870-1275-01 W 10245689323 DSM 4096M VSCCP 027-010-000 1102 Empty 1103 870-1788-03 A 10234658345 TSM 128M GLS 027-010-000 1104 Empty 1105 870-1339-06 A 10274568974 LIMATM - ATMANSI 027-010-000 1106 Empty DSM VSCCP 1107 Empty 1108 870-1456-05 A 10204764378 DCM 512M SS7IPGW 027-010-000 1109 870-2872-01 A 10207185554 HIPR2 - HIPR2 129-001-000 1110 MUX BPHMUX 027-345-000 1111 870-1788-05 A 10205734657 MCPM 4096M MCP 027-010-000 1112 870-1789-04 A 10302135627 LIMDS0 - SS7ANSI 027-010-000 1113 870-2360-01 A 10346357678 GPSM 1024M EOAM 025-340-000 1114 TDM 1115 Unavailable GPSM EOAM 1116 Unavailable 1117 MDAL 1118 Empty
Command Completed.;
Limitations
No limitations are associated with this feature.
Large MSU Support for IP Signaling
The Large MSU Support for IP Signaling feature allows the Large BICC MSU Support for IP Signalingfeature to support additional service indicator (SI) values. As part of this feature, the Large BICC MSUSupport for IP Signaling feature is now referred to as the Large MSU Support for IP Signaling feature.
The Large MSU Support for IP Signaling feature supports MSUs with a SIF size of up to 4095 bytesfor M2PA and M3UA protocols with SI values from 6 - 15.
The SI values are:
• 6, 7—Data• 9—Broadband ISDN• 10—Satellite ISDN• 13—BICC• 14—H.248• 8, 11, 12, 15—Spare
The SLAN, Database Transport Access (DTA), and E5IS features do not support Large MSUs.
48910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Feature Control Requirements
• The Large MSU Support for IP Signaling feature continues to be enabled by a FAK for part number893-0184-01. The existing FAK is expanded to support large MSUs with SI from 6 - 15.
• The feature can be turned on and off.• If the feature is turned on, then MSUs with a SIF size from 272-4095 bytes can be routed.• If the feature is turned off, then MSUs with a SIF size greater than 272 bytes are not routed.
Hardware Requirements
Large MSUs are supported by SSEDCM and E5-ENET cards and by SS7IPGW, IPGWI, IPLIM, IPLIMI,IPGHC, IPLHC and IPSG GPLs.
Commands
• enable/chg/rtrv-ctrl-feat—Enhanced to suport the Large MSU Support for IP Signalingfeature instead of the Large BICC MSU Support for IP Signaling feature
rtrv-ctrl-featrlghncxa03w 10-02-10 16:40:40 EST EAGLE 42.0.0
The following features have been permanently enabled: Feature Name Partnum Status Quantity HC-MIM SLK Capacity 893012707 on 64 Command Class Management 893005801 on ---- LNP Short Message Service 893006601 on ---- XGTT Table Expansion 893006101 on 400000 XMAP Table Expansion 893007710 on 3000 Large System # Links 893005910 on 2000 Routesets 893006403 on 8000 EAGLE5 Product 893007101 on ---- EAGLE Product 893007201 off ---- IP7 Product 893007301 off ---- Network Security Enhance 893009101 off ---- Telnet 893005701 on ---- LNP ELAP Configuration 893010901 on ---- LNP ported TNs 893011036 on 384000000 LNP ported LRNs 893010501 on 200000 LNP ported NPANXXs 893009402 on 350000 15 Minute Measurements 893012101 off ---- EIR 893012301 on ---- EAGLE OA&M IP Security 893400001 off ---- SCCP Conversion 893012001 on ---- Spare Point Code Support 893013601 on ---- Large MSU for IP Sig 893018401 off ----
;
• msucount—Enhanced to report Large MSU results in the full link measurement report instead ofLarge BICC MSU results.
Example 1 shows a full report for an IPGWx link.pass:loc=1305:cmd="msucount -f" rlghncxa03w 09-12-06 16:40:40 EST EAGLE 42.0.0
MSUCOUNT: MSU Count Report
-------------------------- Link Measurements (Link A) --------------------------
49910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Transmit Counts Receive Counts ---------------------------------- ----------------------------- rate msus bytes rate msus bytes ----- ---------- --------------- ----- ---------- ---------- 2000 4294967295 4294967295 2000 4294967295 4294967295
MTP Primitive (MTPP) Counts Reroute Counts ---------------------------------- ----------------------------- sent pdus rcvd pdus dscrd pdus sent msus rcvd msus ---------- ---------- ---------- ---------- ----------------- 4294967295 4294967295 4294967295 4294967295 4294967295
Dynamic Rtkey (RKRP) Counts ---------------------------------- rcvd pdus dscrd pdus updates ---------- ---------- ---------- 4294967295 4294967295 4294967295
Transmit Discard Counts Receive Discard Counts ---------------------------------- --------------------------------- reason count reason count ---------------------- ----------- ---------------------- ---------- no ss7 rtbl entry 4294967295 link state 4294967295 no ss7 rtkey 4294967295 sccp msg type 4294967295 no conn avail to pc 4294967295 sccp class 4294967295 no conn avail to rtkey 4294967295 sccp called party 4294967295 congested connection 4294967295 sccp calling party 4294967295 sccp msg type 4294967295 isup sio 4294967295 sccp class 4294967295 normalization error 4294967295 circular rte 4294967295 error in XSRV packet 4294967295 normalization error 4294967295 M3UA PDU error 4294967295 invalid traffic type 4294967295 SUA PDU error 4294967295 M3UA conversion error 4294967295 invalid rcontext 4294967295 SUA conversion error 4294967295 management blocking 4294967295 AS-Pending overflow 4294967295 lrg MSU not supported 4294967295 AS timer Tr expiry 4294967295 reroute failure 4294967295 unexpected for APC 4294967295 lrg MSU not supported 4294967295
Stored Transmit Discard Data ----------------------------------------------- 83 01 05 05 0a 01 03 bf 09 80 03 08 0d 05 c3 07 01 05 05 05 c3 07 0a 01 03 08 e2 06 c7 04 13 10
Stored Receive Discard Data ----------------------------------------------- 53 41 53 49 73 63 63 70 1a 00 09 01 03 08 0d 05 c3 05 0a 01 03 05 c3 05 01 05 05 08 e2 06 c7 04
MSUCOUNT: command complete;
Example 2 shows a full report for an IPSG M3UA link.pass:loc=1304:cmd=”msucount –l a –f” rlghncxa03w 09-12-07 16:40:40 EST EAGLE 42.0.0
MSUCOUNT: MSU Count Report
SLK Transmit counts SLK Receive counts ---------------------------------- ----------------------------- slk rate msus bytes rate msus bytes --- ----- ---------- ---------- ----- ---------- ---------- A 0 58 3380 0 5 292
Replicated M3UA PDU counts SS7 SNM counts -------------------------- ---------------
50910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
sent rcvd sent ---------- ---------- ---------- 1 1 13
Transmit Discard Counts Receive Discard Counts ---------------------------------- --------------------------------- reason count reason count ---------------------- ----------- ---------------------- ---------- M3UA conversion error 3 M3UA PDU Error 1 management blocking 1 lrg MSU not supported 1
Stored Transmit Discard Data ----------------------------------------------- b0 04 04 04 00 6e 01 18 51 01 00 0f 49 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 04 04 04 00 d2 01 00 23 05 05 05 02 1f 61 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 04 04 04 00 d2 01 00 13 20 19 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Stored Receive Discard Data ----------------------------------------------- 01 00 04 01 00 00 00 18 00 0b 00 08 02 00 00 00 00 06 00 08 00 00 00 04 00 00 00 00 00 00 00 00
01 00 01 01 00 00 00 3c 00 06 00 08 00 00 00 04 02 10 00 2b 00 04 04 04 00 05 05 05 0d 02 00 96
01 00 00 10 00 00 00 1c 00 0c 00 08 00 00 00 06 00 07 00 0c 01 00 02 02 00 00 00 18 00 00 00 00
MSUCOUNT: command complete
;
Limitations
No limitations are associated with this feature.
LOCREQ Query Response
The LOCREQ Query Response feature allows the EAGLE 5 ISS to respond to LOCREQ queries witha LOCREQ response message for both ported and non-ported subscribers.
The LOCREQ Query Response feature populates the RN of the ReturnResult message. Service Portability(S-Port) processing is used to control whether Generic Routing Number (GRN) or default RN digitsare used for the RN in the ReturnResult message.
Feature Control Requirements
• FAK for Part Number 893-0385-01
51910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
• The A-Port (Part Number 893-0166-01) or IS41 GSM Migration (Part Number 893-0173-01) featuremust be turned on before the LOCREQ Query Response feature can be enabled.
• The S-Port feature (Part Number 893-0379-01) must be turned on before S-Port processing canoccur.
• The MNP service must be online before message processing can occur.
Hardware Requirements
None.
Commands
• chg/rtrv-is41opts—Enhanced to provision and display LOCREQ Query Response, S-Port,and default RN functionality.
rtrv-is41opts tekelecstp 10-03-15 12:49:20 EST EAGLE 42.0.0
IS41 OPTIONS ----------------------- SMSREQBYPASS = NO LOCREQDN = SCCP IEC = NONE NEC = NONE RSPCGPARI = FRMSG RSPCGPAPCP = FRMSG RSPCDPARI = FRMSG RSPCDPAPCP = OFF RSPCGPANAI = NONE RSPCGPANP = NONE RSPCGPATT = NONE MTPLOCREQNAI = FRMSG RSPPARM = TLIST RSPDIG = RNDN RSPNON = NONE RSPNP = 2 RSPMIN = HOMERN MSCMKTID = 0 MSCSWITCH = 0 ESNMFG = 0 ESNSN = 0 RSPDIGTYPE = 6 LOCREQRMHRN = NO TCAPSNAI = FRMSG MTPLOCREQLEN = 15 SPORTTYPE = IS41 DFLTRN = 3 LOCREQRSPND = OFF
;
• enable/chg/rtrv-ctrl-feat—Enhanced to enable, turn on, and display the status of theLOCREQ Query Response feature.
rtrv-ctrl-feat rlghncxa03w 10-03-03 16:40:40 EST EAGLE 42.0.0
The following features have been permanently enabled: Feature Name Partnum Status Quantity HC-MIM SLK Capacity 893012707 on 64 Command Class Management 893005801 on ---- LNP Short Message Service 893006601 on ---- Prepaid SMS Intercept Ph1 893006701 on ---- MNP Circ Route Prevent 893007001 on ----
52910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
XGTT Table Expansion 893006101 on 400000 XMAP Table Expansion 893007710 on 3000 Large System # Links 893005911 on 2800 Routesets 893006403 on 8000 EAGLE5 Product 893007101 on ---- EAGLE Product 893007201 off ---- IP7 Product 893007301 off ---- Network Security Enhance 893009101 off ---- Telnet 893005701 on ---- SCCP Loop Detection 893016501 off ---- LNP ELAP Configuration 893010901 on ---- LNP ported TNs 893011036 on 384000000 LNP ported LRNs 893010501 on 200000 LNP ported NPANXXs 893009402 on 350000 15 Minute Measurements 893012101 off ---- EIR 893012301 on ---- EAGLE OA&M IP Security 893400001 off ---- SCCP Conversion 893012001 on ---- SE-HSL SLK Capacity 893013005 on 32 Spare Point Code Support 893013601 on ---- Multiple Linkset to APC 893019701 on ---- Proxy Point Code 893018710 on 100 GPORT 893017201 on ---- APORT 893016601 on ---- IS41 GSM Migration 893017301 off ---- INP 893017901 on ---- LOCREQ Query Response 893038501 off ----
;
Limitations
No limitations are associated with this feature.
MTP Routed GTT
The MTP Routed GTT feature allows Global Title Translation (GTT) and GTT Actions functionalityto be performed on MTP-routed SCCP messages. This feature is provisioned using options in thechg-sccpopts command.
Feature Control Requirements
The MTP Msgs for SCCP Apps (Part Number 893-0174-001) or MTP Routed GWS Stop Action (PartNumber 893-0356-001) feature must be turned on before the MTP Routed GTT feature can beprovisioned.
For actual processing to occur, the MTP Msgs for SCCP Apps must be turned on or the MTP RoutedGWS Stop Action feature must be turned on and the SCCP stop action must be provisioned.
Hardware Requirements
Service Module cards must be installed before the MTP Routed GTT feature can be provisioned.
53910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Commands
The chg/rtrv-sccpopts commands are enhanced to provision and display MTP Routed GTTfunctionality. See the Commands section for the GTT Actions feature for an example of rtrv-sccpoptsoutput.
Limitations
No limitations are associated with this feature.
SCTP Payload Protocol Identifier needs to handle Big Endian or LittleEndian byte order
For M2PA associations, the chg/rtrv-uaps commands are updated to indicate the byte format forthe SCTP Payload Protocol Indicator (PPI) value that is received and transmitted in MSUs. The uapsparameter 4, bit 0 indicates whether the SCTP PPI value is received and transmitted in Network ByteOrder (Big Endian) or Host Byte Order (Little Endian).rtrv-uaps:set=1 eagle10213 10-01-07 14:01:00 EST EAGLE 42.0.0 SET TIMER TVALUE PARM PVALUE 1 1 0 1 3 1 2 3000 2 0 1 3 10000 3 0 1 4 5000 4 0 1 5 0 5 0 1 6 0 6 0 1 7 0 7 0 1 8 0 8 0 1 9 0 9 0 1 10 0 10 0
TIMER 2: False IP Connection Congestion Timer, max time an association can be congested before failing due to false congestion. SS7IPGW and IPGWI applications enforce 0-30000(ms). Not supported on IPSG application. TVALUE : Valid range = 32-bits
TIMER 3: UA HeartBeat Period Timer T(beat), time (ms) between sending of BEAT msgs by NE. IPSG, SS7IPGW and IPGWI applications enforce 100(ms)-60000(ms). TVALUE : Valid range = 32-bits
TIMER 4: UA HeartBeat Received Timer T(beat ack), timeout period for response BEAT ACK msgs by NE. IPSG, SS7IPGW and IPGWI applications enforce 100(ms)-10000(ms). TVALUE : Valid range = 32-bits
PARM 1: ASP SNM options. Each bit is used as an enabled/disabled flag for a particular ASP SNM option. Not supported on IPSG application. PVALUE : Valid range = 32-bits BIT BIT VALUE 0=Broadcast 0=Disabled , 1=Enabled 1=Response Method 0=Disabled , 1=Enabled 2-5=Reserved 6=Broadcast Congestion Status Change 0=Disabled , 1=Enabled 7-31=Reserved
PARM 2: ASP/AS Notification options. Each bit is used as an
54910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
enabled/disabled flag for a particular ASP/AS Notification option. Not supported on IPSG application. PVALUE : Valid range = 32-bits BIT BIT VALUE 0=ASP Active Notifications 0=Disabled , 1=Enabled 1=ASP Inactive Notifications 0=Disabled , 1=Enabled 2=ASP AS State Query 0=Disabled , 1=Enabled 3-31=Reserved
PARM 3: UA Serviceability Options. Each bit is used as an enabled/disabled flag for a particular UA Serviceability option. Supported on IPSG, SS7IPGW, and IPGWI applications. UA Graceful Shutdown supported on IPSG for M3UA only. PVALUE : Valid range = 32-bits BIT BIT VALUE 0=UA Heartbeats 0=Disabled , 1=Enabled 1=UA Graceful Shutdown 0=Disabled , 1=Enabled 2-31=Reserved
PARM 4: SCTP Payload Protocol Indicator byte order option. Bit indicates PPI value is RCV/TX in Big Endian or Little Endian byte format. Supported on IPSG-M2PA associations only. PVALUE : Valid range = 32-bits BIT BIT VALUE 0=Payload Protocol Indicator 0=Big Endian , 1=Little Endian 1-31=Reserved
The chg-assoc command is updated to support M2PA associations for the uaps parameter. Thertrv-assoc command is updated to display the uaps value for M2PA associations. The output isalso updated to increase readability.
Example 1 retrieves all assocations.rtrv-assoc CARD IPLNK ANAME LOC PORT LINK ADAPTER LPORT RPORT OPEN ALW a23456789012345 1305 A A M3UA 20000 30000 YES YES b23456789012345 1305 B A M3UA 20001 30001 NO NO c23456789012345 1307 A A SUA 20002 30002 YES YES d23456789012345 1307 B A M3UA 20003 30003 NO NO e23456789012345 1315 A A SUA 20004 30004 YES YES f23456789012345 1315 A,B A M3UA 20005 30005 YES YES g23456789012345 1317 B,A A SUA 20006 30006 YES YES m2pa1105b3 1105 A B3 M2PA 31105 31105 YES YES m2pa1107a0 1107 A -- M2PA 1107 1107 NO NO m2pa1107a1 1107 A -- M2PA 11107 11107 NO NO m3ua1211a0 1211 A A M3UA 1211 1213 YES YES m3ua1211a1 1211 A ** M3UA 11211 11213 YES YES m3ua1211a2 1211 A B1 M3UA 21211 21213 YES YES m3ua1211a3 1211 A A3 M3UA 31211 31213 YES YES m3ua1213a0 1213 A A M3UA 1213 1211 YES YES m3ua1213a1 1213 A A1 M3UA 11213 11211 YES YES m3ua1213a2 1213 A A2 M3UA 21213 21211 YES YES m3ua1213a3 1213 A A3 M3UA 31213 31211 YES YES ipg1215a01 1215 A ** M3UA 11215 1111 YES YES ipg1215a02 1215 A ** M3UA 11215 1112 YES YES ipg1215a03 1215 A -- M3UA 11215 1113 NO NO ipg1215a04 1215 A -- M3UA 11215 1114 NO NO ipg1215a05 1215 A -- M3UA 11215 1115 NO NO ipg1215a06 1215 A -- M3UA 11215 1116 NO NO
IP Appl Sock/Assoc table is (24 of 4000) 1% full
;
Example 2 retrieves a specified M2PA association.rtrv-assoc:aname=m2pa1 ANAME m2pa1 LOC 1305 IPLNK PORT A LINK B1 ADAPTER M2PA VER M2PA RFC
55910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
LHOST e1011001.1305a ALHOST --- RHOST e1011501.1305a ARHOST --- LPORT 2005 RPORT 2005 ISTRMS 2 OSTRMS 2 BUFSIZE 200 RMODE LIN RMIN 120 RMAX 800 RTIMES 10 CWMIN 3000 UAPS 7 OPEN NO ALW YES RTXTHR 0 RHOSTVAL RELAXED M2PATSET 1
LSN lsm2pa05
Feature Control Requirements
There are no feature control requirements identified for this feature.
Hardware Requirements
None.
Limitations
No limitations are associated with this feature.
S-Port Subscriber Differentiation
The Service Portability (S-Port) Subscriber Differentiation feature allows multiple routing numbers tobe provided for a subscriber. This functionality allows different processing to be performed on differentgroups of subscribers.
This feature uses the Additional Subscriber Data (ASD) as the subscriber’s private routing number(for message relay features) and the Generic Routing Number (GRN) as the subscriber’s public routingnumber (for query/response features). If ASD is not provisioned, then subscribers follow standardS-Port processing using the GRN.
The feature overrides the S-Port application of the GRN by using the ASD, if present, for call flowsresulting in message relay.
Feature Control Requirements
• FAK for Part Number 893-0379-01• The S-Port feature (Part Number 893-0343-01) must be enabled before the S-Port Subscriber
Differentiation feature can be enabled.• A temporary FAK cannot be used to enable the S-Port Subscriber Differentiation feature.• The S-Port Subscriber Differentiation feature cannot be turned off after it has been turned on.
• The INP feature (Part Number 893-0179-01) with the MR service, Info Analyzed Relay NumberPortability feature (Part Number 893-0261-01), MO-based GSM SMS NP feature (Part Number893-0194-01), MO-based IS41 SMS NP feature (Part Number 893-0195-01), or Prepaid IDP QueryRelay feature (Part Number 893-0160-01) must be turned on before S-Port Subscriber Differentiationprocessing can occur.
56910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Hardware Requirements
None.
Commands
• chg/rtrv-sccpopts—Enhanced to provision and display the S-Port Subscriber Differentiationoption.
rtrv-sccpopts tekelecstp 10-02-15 14:07:11 EST EAGLE 42.0.0 SCCP OPTIONS ------------------------------- CLASS1SEQ off CCLEN 1 ACLEN 3 INTLUNKNNAI no SUBDFRN off MOBRSCCPOPC MTP DFLTGTTMODE CdPA
• enable/chg/rtrv-ctrl-feat—Enhanced to enable, turn on, and display the status of theS-Port Subscriber Differentiation feature.
rtrv-ctrl-feat rlghncxa03w 10-02-13 16:40:40 EST EAGLE 42.0.0
The following features have been permanently enabled: Feature Name Partnum Status Quantity HC-MIM SLK Capacity 893012707 on 64 Command Class Management 893005801 on ---- LNP Short Message Service 893006601 on ---- MNP Circ Route Prevent 893007001 on ---- XGTT Table Expansion 893006101 on 400000 XMAP Table Expansion 893007710 on 3000 Large System # Links 893005911 on 2800 Routesets 893006403 on 8000 EAGLE5 Product 893007101 on ---- EAGLE Product 893007201 off ---- IP7 Product 893007301 off ---- Network Security Enhance 893009101 off ---- Telnet 893005701 on ---- LNP ELAP Configuration 893010901 on ---- LNP ported TNs 893011036 on 384000000 LNP ported LRNs 893010501 on 200000 LNP ported NPANXXs 893009402 on 350000 15 Minute Measurements 893012101 off ---- EIR 893012301 on ---- EAGLE OA&M IP Security 893400001 off ---- SCCP Conversion 893012001 on ---- SE-HSL SLK Capacity 893013005 on 32 Spare Point Code Support 893013601 on ---- GPORT 893017201 on ---- APORT 893016601 on ---- INP 893017901 on ---- INP Circ Route Prevention 893028501 off ---- Service Portability 893034301 off ---- S-Port Sub Dfrntiation 893037901 off ----
;
57910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Limitations
No limitations are associated with this feature.
Support >25 SCCP cards with EPAP T1200 application server
The Support >25 SCCP cards with EPAP T1200 application server allows up to 32 SCCP cards to besupported when any EPAP-based feature is turned on and an EPAP T1200 application server is used.This feature also increases the system SCCP transactions per second (TPS) to (Maximum card TPS *32 cards).
This functionality impacts the TPS quantities implemented by the E5-SM4G Throughput Capacityfeature. Table 2: TPS Capacities shows the revised TPS capacities for each E5-SM4G Throughput Capacityquantity.
Table 2: TPS Capacities
Maximum System TPSCapacity
*Maximum TPS Capacity perE5-SM4G Card
Feature Quantity Part Number
75,000 TPS with one or moreEPAP-related features and24+1cards
3125893-0191-01
96,875 TPS with one or moreEPAP-related features enabledand 32 cards
150,000 TPS with noEPAP-related or ELAP-relatedfeature traffic and 31+1 cards
5000
120,000 TPS with G-Flex and theANSIGFLEX STP option and24+1 cards
155,00 TPS with G-Flex and theANSIGFLEX STP option and31+1 cards (EPAP running onT1200 AS)
40,000 TPS with ELAP and 8+1cards
85,000 TPS with ELAP and 17+1cards
210,800 TPS with noELAP-related or without
6800893-0191-02
58910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Maximum System TPSCapacity
*Maximum TPS Capacity perE5-SM4G Card
Feature Quantity Part Number
EPAP-related feature traffic and31 + 1 cards
163,200 TPS with one or moreEPAP-related features and 24+1cards
54,400 TPS with ELAP and 8+1cards
115,600 TPS with ELAP and 17+1cards
*32 cards implies an N+1 configuration, so 31 cards are used for calculating actual TPS capacity.
Feature Control Requirements
There are no feature control requirements identified for this feature.
Hardware Requirements
• All cards must be DSM or E5-SM4G cards.• A T1200 Application Server is required.• 4 Telco GigE switches are required for the EAGLE 5 ISS and EPAP inter-connection.
Commands
• enable-ctrl-feat—Enhanced to provide a warning that the EAGLE 5 ISS must be connectedto an EPAP T1200 or higher when the first EPAP-based feature is enabled if Global Title Translation(GTT) is on and more than 25 SCCP cards are provisioned..
• ent-card—Enhanced to support up to 32 SCCP cards when any EPAP-based feature is turnedon.
Limitations
No limitations are associated with this feature.
Support FastCopy on IPGW
The Support FastCopy on IPGW feature provides support for monitoring M3UA and SUA traffic onE5-ENET cards running the IPGHC GPL using Fast Copy-based or STC monitoring.
Feature Control Requirements
There are no feature control requirements identified for this feature.
59910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Hardware Requirements
The Fast Copy feature requires E5-ENET cards.
If Fast Copy monitoring is active, and an E5-ENET card is replaced by a DCM card, then the DCMcard will perform STC-based monitoring, and any remaining E5-ENET cards will perform Fast Copymonitoring.
Commands
• chg/rtrv-eisopts—Enhanced to apply Fast Copy to E5-ENET cards running the IPSG or IPGHCGPL.
rtrv-eisopts rlghncxa03w 10-02-04 10:07:58 EST EAGLE 42.0.0 EIS OPTIONS -------------------------------- EISCOPY = ON
FAST COPY OPTIONS -------------------------------- FCGPL = IPSG FCMODE = FCOPY FCGPL = IPGHC FCMODE = FCOPY --------------------------------;
• chg-netopts—Enhanced to support Fast Copy on E5-ENET cards running the IPGHC GPL.• ent/rept-stat-card—Enhanced to support Fast Copy on E5-ENET cards running the IPGHC
GPL.• rept-stat-mon—Enhanced to support Fast Copy on E5-ENET cards running the IPGHC GPL.
Example 1 displays output when monitoring system status is requested on all cards.rept-stat-mon rlghncxa03w 10-02-04 16:35:57 IST EAGLE 42.0.0 EROUTE SUBSYSTEM REPORT IS-NR Active ----- STC Cards Configured= 4 Cards IS-NR= 2 EISCOPY BIT = ON System Threshold = 80% Total Capacity System Peak EROUTE Load: 7080 Buffers/Sec System Total EROUTE Capacity: 12000 Buffers/Sec
SYSTEM ALARM STATUS = No Alarms.
CARD VERSION PST SST AST TVG CPU USAGE USAGE ------------------------------------------------------------------ 1101 052-008-000 IS-NR Active ----- 63% 28% 1103 052-008-001 IS-NR Active ----- 55% 28% 1105 255-255-255 OOS-MT Isolated ----- 0% 0% 1205 255-255-255 OOS-MT Isolated ----- 0% 0% ------------------------------------------------------------------ EROUTE Service Average TVG Capacity = 59% Average CPU Capacity = 28%
CARDS DENIED EROUTE SERVICE:
==================================================================
FAST COPY SUBSYSTEM REPORT IS-NR Active ----- FC Cards Configured= 3 Cards IS-NR= 3 SYSTEM ALARM STATUS = No Alarms.
FAST COPY OPTIONS --------------------------------
60910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
FCGPL = IPSG FCMODE = FCOPY FCGPL = IPGHC FCMODE = FCOPY --------------------------------
CARD GPL PST SST CPU CARD FCS ------------------------------------------------------ 1201 IPSG IS-NR Active 34% ALLOWED 1202 IPSG IS-NR Active 55% ALLOWED 1203 IPGHC IS-NR Active 10% ALLOWED ------------------------------------------------------
Command Completed.;
Example 2 displays output when the status is requested for Fast Copy monitoring.rept-stat-mon:type=fcs rlghncxa03w 10-02-02 16:35:57 IST EAGLE 42.0.0 FAST COPY SUBSYSTEM REPORT IS-NR Active ----- FC Cards Configured= 3 Cards IS-NR= 3 SYSTEM ALARM STATUS = No Alarms.
FAST COPY OPTIONS -------------------------------- FCGPL = IPSG FCMODE = FCOPY FCGPL = IPGHC FCMODE = FCOPY --------------------------------
CARD GPL PST SST CPU CARD FCS ------------------------------------------------------ 1201 IPSG IS-NR Active 34% ALLOWED 1202 IPSG IS-NR Active 55% ALLOWED 1203 IPGHC IS-NR Active 10% ALLOWED ------------------------------------------------------
Command Completed.;
• rept-stat-sys—Enhanced to report the status of the Fast Copy subsystem for E5-ENET cardsrunning the IPGHC GPL.
Limitations
No limitations are associated with this feature.
Support IPSG Link Capacity Sharing
The Support IPSG Link Capacity Sharing feature enhances the IPSG flow control by allowing all ofthe signaling links on an IPSG card to share in the Transactions Per Second (TPS) of the card.
Each IPSG linkset is configured for the SLKTPS (also referred to as the Reserved SLKTPS) and theMaximum SLKTPS. The Reserved SLKTPS is the signaling link TPS capacity that is reserved orguaranteed for each link in an IPSG linkset. The Maximum SLKTPS is the maximum TPS capacity thata link is allowed if enough unused capacity is present on the host card. Linksets share available cardcapacity when presented with a load in excess of the Reserved SLKTPS up to the Maximum SLKTPSvalue.
During provisioning, the EAGLE 5 ISS verifies that neither the Reserved SLKTPS nor the MaximumSLKTPS exceed 5000 TPS and that the sum of the Reserved SLKTPS for all of the links hosted by anIPSG card does not exceed 5000 TPS for the card.
61910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Operation of IPSG links when IPSG Link Capacity Sharing is used:
• Links operate independently if their traffic load falls within their respective reserved capacity. Theunconsumed portion is available to other links hosted by the same card.
• If the traffic load exceeds the Reserved SLKTPS, then the link can draw from the card unused TPS.If the traffic load exceeds the Maximum SLKTPS for the card, then the link limits processing at themaximum SLKTPS and may enter congestion.
• If the traffic load exceeds the Reserved SLKTPS, and enough card capacity originally existed toallow the link to process the load, but the available card capacity changes so that there is not enoughavailable card capacity to process the load, then the link can enter congestion without affectingother links hosted by the card.
• If multiple links hosted by an IPSG card exceed their Reserved SLKTPS, then the links compete foravailable capacity on a round-robin basis.
Feature Control Requirements
There are no feature control requirements identified for this feature.
Hardware Requirements
None.
Commands
• ent/chg/rtrv-ls—Enhanced to provision and display the Maximum and Reserved SLKTPSvalues for IPSG linksets.
Example 1 displays output for an IPSG-M3UA linkset.rtrv-ls:lsn=ipsgm3ua e1001501 10-04-03 16:20:42 EST EAGLE 42.0.0
L3T SLT GWS GWS GWS LSN APCA (SS7) SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS ipsgm3ua 008-008-004 none 1 1 no A 3 off off off no off
SPCA CLLI TFATCABMLQ MTPRSE ASL8 ---------------- ----------- --- --- no
RANDSLS off
IPSG IPGWAPC GTTMODE CGGTMOD yes no CdPA no
ADAPTER RSVDSLKTPS MAXSLKTPS m3ua 100 100
TPSALM LSUSEALM SLKUSEALM rsvdslktps 80% 80%
RCONTEXT ASNOTIF NUMSLKALW NUMSLKRSTR NUMSLKPROH 1234567890 yes 2* 1 1
LOC LINK SLC TYPE ANAME 1102 A2 0 IPSG ipsgm3ua1102 1202 A3 1 IPSG ipsgm3ua1202 1302 A4 2 IPSG ipsgm3ua1302
Link set table is (1 of 1024) 1% full.
62910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
;
Example 2 displays output for an IPSG-M2PA linkset.rtrv-ls:lsn=m2pa12132 e1001501 10-04-03 16:20:43 EST EAGLE 42.0.0
L3T SLT GWS GWS GWS LSN APCA (SS7) SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS m2pa12132 001-213-002 none 1 1 no A 1 off off off no off
SPCA CLLI TFATCABMLQ MTPRSE ASL8 ---------------- ----------- 1 no no
RANDSLS off
IPSG IPGWAPC GTTMODE CGGTMOD yes no CdPA no
ADAPTER RSVDSLKTPS MAXSLKTPS m2pa 1000 5000
TPSALM LSUSEALM SLKUSEALM maxslktps 100% 80%
LOC LINK SLC TYPE ANAME 1303 A 0 IPSG m2pa1303a
Link set table is (20 of 1024) 2% full.
;
• rept-stat-iptps—Enhanced to display the Maximum and Reserved SLKTPS values for IPSGlinksets.
Example 1 displays output when IPSG linksets are included.rept-stat-iptps rlghncxa03w 10-04-03 16:20:46 EST EAGLE 42.0.0
IP TPS USAGE REPORT
THRESH CONFIG/ CONFIG/ TPS PEAK PEAKTIMESTAMP RSVD MAX --------------------------------------------------------------------------- LSN IPSGM3UA 100% 4000 10000* TX: 3700 4000 03-05-05 09:49:19 RCV: 3650 4000 03-05-05 09:49:19 IPSGM2PA 100% 10000* 20000 TX: 4800 5000 03-05-05 09:49:09 RCV: 4850 5000 03-05-05 09:49:09 IPGW1103 100% ---- 500 TX: 427 550 03-05-05 09:49:19 RCV: 312 450 03-05-05 09:49:19 ---------------------------------------------------------------------------
Example 2 displays output for an IPSG-M3UA linkset.rept-stat-iptps:lsn=ipsgm3ua rlghncxa03w 10-04-03 16:20:46 EST EAGLE 42.0.0
IP TPS USAGE REPORT
THRESH CONFIG/ CONFIG/ TPS PEAK PEAKTIMESTAMP RSVD MAX --------------------------------------------------------------------------- LSN IPSGM3UA 100% 4000 10000* TX: 3700 4000 03-05-05 09:49:19 RCV: 3650 4000 03-05-05 09:49:19 ---------------------------------------------------------------------------
63910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
LOC LINK 1101 A 80% 2000 5000* TX: 1851 2000 03-05-05 09:49:19 RCV: 1801 2000 03-05-05 09:49:19 1201 A 80% 2000 5000* TX: 1849 2000 03-05-05 09:49:19 RCV: 1799 2000 03-05-05 09:49:19 ---------------------------------------------------------------------------
Example 3 displays output for an IPSG-M2PA linkset.rept-stat-iptps:lsn=ipsgm2pa rlghncxa03w 10-04-03 16:20:46 EST EAGLE 42.0.0
IP TPS USAGE REPORT
THRESH CONFIG/ CONFIG/ TPS PEAK PEAKTIMESTAMP RSVD MAX --------------------------------------------------------------------------- LSN IPSGM2PA 100% 10000* 20000 TX: 4800 5000 03-05-05 09:49:09 RCV: 4850 5000 03-05-05 09:49:09 --------------------------------------------------------------------------- LOC LINK 1105 A 80% 2500* 5000 TX: 2399 2500 03-05-05 09:49:09 RCV: 2428 2500 03-05-05 09:49:09 1205 A 80% 2500* 5000 TX: 2401 2500 03-05-05 09:49:09 RCV: 2422 2500 03-05-05 09:49:09 1305 A 80% ---- ---- TX: ---- ---- ----------------- RCV: ---- ---- ----------------- 2105 A 80% ---- ---- TX: ---- ---- ----------------- RCV: ---- ---- ----------------- ---------------------------------------------------------------------------
• rtrv-slk—Enhanced to display the Maximum and Reserved SLKTPS values for IPSG linksets.
Example 1 displays output for an IPSG card.rtrv-slk:loc=1301 e1001501 10-04-03 16:20:45 EST EAGLE 42.0.0
LOC LINK LSN SLC TYPE ANAME SLKTPS/ MAXSLKTPS RSVDSLKTPS 1301 A SCS1 0 IPSG sg1301a 500 5000 1301 B SCS2 0 IPSG sg1301b 1000 5000 1301 A1 MGC1 0 IPSG sg1301a1 700 5000 1301 B1 MGC2 0 IPSG sg1301b1 1200 5000
IPTPS for LOC = 1301 is (3400 of 5000) 68%
;
Example 2 displays output for an association.rtrv-slk:aname=m3ua1211a1 e1001501 10-04-03 16:20:45 EST EAGLE 42.0.0
LOC LINK LSN SLC TYPE ANAME SLKTPS/ MAXSLKTPS RSVDSLKTPS 1211 A1 ls1211b 0 IPSG m3ua1211a1 600 5000 1211 A2 ls1211c 0 IPSG m3ua1211a1 700 5000;
Limitations
No limitations are associated with this feature.
64910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Support of 750K System (SIGTRAN + ATM) TPS
The Support of the 750K System TPS core enhancement consists of four components:
• The maximum allowed system TPS that can be provisioned is increased to 750,000 TPS.• All TPS-based limitations on the number of IPLIM, IPGW, IPSG, and ATM/E5-ATM cards that are
allowed within the EAGLE 5 ISS are removed. The maximum number of cards that can exist onthe EAGLE 5 ISS can be added.
Note: Links cannot be added to a card if the new link would exceed the maximum allowed SystemTPS.
• The provisioned system TPS is limited using the HIPR2 High Rate Mode feature. If the feature isturned off, then the provisioned system TPS must be less than or equal to 500,000. If the feature isturned on, then the provisioned system TPS must be less than or equal to 750,000. The EAGLE 5ISS must be configured with HIPR2 cards and the HIPR2 High Rate Mode feature must be turnedon before the increased capacities are supported.
• IPLIM card TPS and ATM links TPS are included in the calculation of the total provisioned systemTPS.
The provisioned System TPS calculation is calculated by summing the TPS values for the IPGW andIPSG linksets + number of IPLIM cards with provisioned link(s) + the TPS values for the ATM links.
If the configuration before upgrade exceeds the maximum allowed system TPS, the EAGLE 5 ISScontinues to function as it did before upgrade: however, changes that increase the provisioned systemTPS are not allowed. After upgrade, once the system provisioned TPS has reached its allowed maximum,no further changes can be made that will increase the provisioned TPS.
Feature Control Requirements
The HIPR2 High Rate Mode feature (Part Number 893-0201-01) must be turned on before more than500K TPS can be provisioned in the system.
Hardware Requirements
HIPR2 cards must be installed before more than 500K TPS can be provisioned in the system.
Commands
• chg-ctrl-feat—Enhanced to prevent the HIPR2 High Rate Mode from being turned off if theSystem TPS exceeds 500,000.
• ent/chg-ls—Enhanced to allow the sum of TPS values assigned to all IPGW linksets in thesystem or to all links on IPLIM, ATM, E5-ATM or IPSG cards to support 750,000 TPS when theHIPR2 High Rate Mode feature is turned on.
• ent-card—Enhanced to allow 250 IPGW, IPSG, IPLIM and ATM cards to be assigned to thesystem and to support different values in deriving the TPS estimate.
• ent-slk—Enhanced to support 750,000 TPS when the HIPR2 High Rate Mode feature is turnedon.
• rtrv-tps—Added to display the total provisioned TPS for ATM, E5-ATM, IPGWx, IPLIMx, andIPSG cards.
65910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
rtrv-tps rlghncxa03w 10-02-10 16:20:46 EST EAGLE 42.0.0
CARD NUM NUM RSVD MAX TYPE CARDS LINKS TPS TPS ----- ----- ----- -------- -------- IPGW 9 8 32000 40000 IPSG 100 16 80000 80000 IPLIM 1 0 0 0 ATM 0 0 0 0
Total provisioned System TPS (120000 of 750000) 16%
Command Completed.;
Limitations
No limitations are associated with this feature.
Upgrade Enhancements
Multiple enhancements are introduced for the EAGLE 5 ISS upgrade process, including groupingcards by link type, the introduction of an expedited upgrade procedure, and other changes.
Grouping Cards by Link Type
During upgrade, cards are grouped by link type instead of by individual GPL. This method resultsin the following groups:
• SS7 (SS7ML, SS7HC)• IPLIMx (IPLIM, IPLIMI, IPLHC, IPSG)• IP Gateway (SS7IPGW, IPGWI, IPGHC)• ATM (ATMANSI, ATMITU, ATMHC)
Using this grouping method with a 75% threshold converts each link-type group in four sets of cards,based on card type and even link distribution across the system.
Expedited Upgrade Procedure
An expedited upgrade procedure is introduced. This procedure groups cards with SS7, IPLIMx, IPGateway, and ATM links into one group, using the chg-upgrade-config command, and appliesa specified threshold rate across all of the cards in the group. This change is designed to complete theupgrade within the maintenance window when issues occur during execution.
Additional Upgrade Changes
Additional upgrade changes to the EAGLE 5 ISS upgrade process are:
• TCU enhancement to speed the initialization of tables during format of disk partition during Phase0 and Phase 2
• Increased reliability and error handling during the download and activation of Flash images
66910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
• Allowing cards running the EROUTE, SLAN, GLS, MCPM and IPSM GPLs to upgrade in 2 setseach
Note: SCCP cards upgrade using the existing process based on peak TPS.
• Extended link activation timeout on IPSG cards• MCPM cards do not need to be taken off-line during upgrade. It is recommended to offload historical
measurement data before performing an upgrade as this data may be lost during upgrade.
Feature Control Requirements
There are no feature control requirements identified for this feature.
Hardware Requirements
None.
Commands
• act-upgrade—Enhanced to support the revised card grouping procedure.• chg/rtrv-upgrade-config—Enhanced to control card grouping during upgrade.
rtrv-upgrade-config rlghncxa03w 10-02-13 08:15:45 EST EAGLE 42.0.0 Software Access Key entered on system: VBJYAPDPBTEJB Configured Upgrade Threshold Type: GROUP Command Completed.;
Limitations
No limitations are associated with this feature.
Other Changes
The following core enhancements are introduced in Release 43.0:
CRP for SRIs without HomeRN
The MNP Circular Route Prevention feature (CRP) is enhanced to allow CRP based on the translationtype (TT) to be performed for SRI messages when a Home Routing Number (HomeRN) is not present.
SRI Messages must meet the following criteria to be eligible for TT-based CRP:
• The message is selected for G-Port or IS41 GSM Migration processing.• The message is not identified as G-Port SRI Query for Prepaid.• The message is not MTP-routed (the CdPA is Route-on-GT).• The SCCP CdPA TT matches the provisioned TT.• The TCAP Package type is ITU Begin.• The OpCode is an SRI (hexadecimal 16).
67910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
• The Optimal Routing Interrogation Parameter (Tag = 0x04) is not present.• The MSISDN is not assigned to the subscriber's network provider.
Feature Control RequirementsThe MNP Circular Route Prevention feature (Part Number 893-0070-01) must be turned on beforeTT-based CRP processing can be provisioned. The MNP CRP feature cannot be turned off if this CRPprocessing is provisioned.
Commands• chg-ctrl-feat—Enhanced to prevent the MNP CRP feature from being turned off if the crptt
parameter is provisioned.• chg/rtrv-gsmopts—Enhanced to provision and display the crptt value that is used to generate
CRP.
rtrv-gsmopts tekelecstp 10-03-06 16:12:11 EST EAGLE 42.0.0 GSM OPTIONS ---------------------------- MULTCC = 456 MULTCC = NONE MULTCC = NONE MULTCC = NONE MULTCC = NONE MULTCC = NONE MULTCC = NONE MULTCC = NONE MULTCC = NONE MULTCC = NONE DEFMAPVR = 1
DEFMCC = 123 DEFMNC = NONE CCNC = 12 MCCMNC = 3456 CCNC = 56 MCCMNC = 9876 CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE CCNC = NONE MCCMNC = NONE
SRIDN = SCCP SRIDNNOTFOUND = GTT CRPTT = NONE SRISMGTTRTG = OFF ENCODECUG = OFF ENCODENPS = ON MSRNDIG = RN MSRNNAI = 0 MSRNNP = 0 MSISDNTRUNC = 0 SRFADDR = NONE SRFNAI = 0 SRFNP = 0
SERVERPFX = NONE GSM2IS41 = NONE MIGRPFX = SINGLE IS412GSM = 67
SPORTTYPE = NONE DFLTRN = NONE
EIRGRSP = OFF EIRRSPTYPE = TYPE1 EIRIMSICHK = OFF
GFLEXMAPLAYERRTG = NONE
CutAndPaste parameter in Connect response to INP IDP Query
The INP feature is enhanced to allow the CutAndPaste parameter to be included in the Connect responseto an INP IDP query. This parameter provides the number of digits that the originating node of thequery should discard from the CdPN digit string that the node is holding. Any digits remaining after
68910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
the discard are pasted at the end of the DRA digits included in the Connect response. The queryoriginating node uses this digit combination to construct a new routing number.
The CutAndPaste parameter consists of 3 bytes (tag, length, and value). The value field is the length ofthe incoming CdPN digit string (incoming DN) received in the INP IDP query. Therefore, the queryoriginating node discards the entire CdPN digit string and uses the DRA digits as the routing digits.
If the CutAndPaste functionality is provisioned as ON, then the CutAndPaste parameter is included inthe Connect response. Otherwise, the parameter is excluded. If the INPOPTS:DRA setting has a DNcomponent, then the value field of the CutAndPaste parameter is the length of the incoming CdPNdigit string (incoming DN) received in the IDP query. This informs the querying node to discard allstored digits, because the DN is supplied in the Connect response. If the INPOPTS:DRA setting doesnot have a DN component, then the value is zero. This informs the querying node to use all storeddigits, because none are present in the DRA.
Feature Control RequirementsThe INP feature (Part Number 893-0179-01) must be enabled before the CutAndPaste functionalitycan be provisioned.
CommandsThe chg/rtrv-inpopts commands are enhanced to provision and display the CutAndPastefunctionality by specifying the cutnpaste option for the on and off parameters. This option has adefault of OFF.rtrv-inpopts rlghncxa03w 10-03-17 15:35:05 EST EAGLE 42.0.0 INP OPTIONS ----------------------- NEC = NONE DRANAIV = 126 DRANP = E164 DRA = RNDN SPRESTYPE = CONTINUE RELCAUSE = 31 SPORTTYPE = NONE DEFRN = NONE CUTNPASTE = OFF
CDPNPFX DLTPFX --------------- ---
CDPNNAI SNAI --- ----
;
E5-OAM Recovery Console
The E5-OAM Recovery Console functionality is used when a mismatch occurs between the OAMHCand BLMCAP GPLs. The OAMHC GPL is the OAM application, and the BLMCAP GPL contains theOS and OS Services.
If a mismatch occurs, the Recovery Console informs the operator and/or the mate E5-OAM card thatthe card cannot load the OAMHC application and allows for the selection of appropriate recoveryprocedures. After a recovery procedure is selected, the Recovery Console automates and performsthe procedures without additional intervention. These procedures assist in flashing the E5-OAM withthe correct BLMCAP version.
69910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
E5-OAM/IP Ethernet Support
The existing infrastructure for IP/Ethernet provisioning and support is expanded to include E5-MASPhardware, allowing MCAP locations (1113, 1115) to be provisioned with an IP Address. The E5-MASPsupports initialization of the Ethernet interface and IP stack with the given provisioning and addssupport for FTP and Secure FTP.
Note: Provisioning can be performed on the A port only.
As part of this enhancement, provisioning of IP/Ethernet is disabled on legacy GPSM-II hardware.
This enhancement is used to provide Ethernet support for FTP for the E5-OAM Integrated Measurementsfeature.
E5-OAM/IP Ethernet Support does not require new hardware: however, the E5-MASP must be insertedinto the -06 (Part Number 850-0330-06) or -07 (Part Number 850-0330-07) backplane. The backplaneadapter (Part Number 830-1333-02) is also required for connection to an Ethernet hub.
Commands
• chg/rtrv-ip-card—Enhanced to support MCAP locations.• chg/rtrv-ip-link—Enhanced to support MCAP locations.• rept-stat-card—Enhanced to display the status for the E5-MASP.
rept-stat-card:loc=1113:mode=full tekelecstp 10-01-07 09:37:39 EST EAGLE 42.0.0 CARD VERSION TYPE GPL PST SST AST 1113 030-002-022 E5MCAP OAMHC IS-NR Active ----- ALARM STATUS = No Alarms. BLMCAP GPL version = 030-004-000 IMT BUS A = Conn IMT BUS B = Conn CLOCK A = Active CLOCK B = Idle CLOCK I = Idle MBD BIP STATUS = Valid MOTHER BOARD ID = E5-MCAP DBD STATUS = Valid DBD TYPE = 1G ENET DBD MEMORY SIZE = 2048M HW VERIFICATION CODE = ---- CURRENT TEMPERATURE = 0C ( 32F) PEAK TEMPERATURE: = 0C ( 32F) [00-00-00 00:00] TROUBLE TEXT VER. = Rev 133.1.2 TVG STATUS IPLNK STATUS IPLNK IPADDR STATUS PST A 192.168.1.1 UP IS-NR
• rept-stat-enet—Enhanced to support MCAP locations.
EAGLE USB Enhancements
The act-upgrade command is enhanced to use the release number as the value for the releaseparameter. The value must have a format of xx.xx.xx-yy.yy.yy, where xx.xx.xx is the release numberand yy.yy.yy is the engineering build number.
70910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
EOAP Hardware Maintenance Phase
As of EAGLE 5 ISS Release 42.0, the EOAP is no longer supported. SEAS over IP and E5-IPSM cardsmust be used for the SEAS interface with Release 42.0 or greater.
CommandsSupport for OAP terminals is removed from the act-echo, act-upgrade, act-user, chg-ls,chg-pid, chg/rtrv-secu-trm, chg-sid, chg/rmv/rtrv-trm, inh/unhb-alm, inh-trm,lock, logout, rept-stat-alm, rept-stat/rtrv-gpl, rept-stat-seas,rept-stat-sys, rept-stat-trbl, rtrv-log, and rtrv-user commands.
Support for the seas parameter is removed from the chg/rtrv-feat commands.
The act/chg/rtrv-oap-config and the init-oap commands are no longer supported.
Output examples for commands that are impacted by the removal are shown below:
• rept-stat-alm
rept-stat-alm rlghncxa03w 10-02-27 15:00:53 EST EAGLE 42.0.0 ALARM TRANSFER= LMC ALARM MODE CRIT= SILENT MAJR= SILENT MINR= SILENT ALARM FRAME 1 CRIT= 0 MAJR= 0 MINR= 0 ALARM FRAME 2 CRIT= 0 MAJR= 0 MINR= 0 ALARM FRAME 3 CRIT= 0 MAJR= 0 MINR= 0 ALARM FRAME 4 CRIT= 0 MAJR= 0 MINR= 0 ALARM FRAME 5 CRIT= 0 MAJR= 0 MINR= 0 ALARM FRAME 6 CRIT= 0 MAJR= 0 MINR= 0 ALARM FRAME GPF CRIT= 0 MAJR= 0 MINR= 0 TOTAL ALARMS CRIT= 0 MAJR= 0 MINR= 0 PERM. INH. ALARMS CRIT= 0 MAJR= 0 MINR= 0 TEMP. INH. ALARMS CRIT= 0 MAJR= 0 MINR= 0 TIMED.INH. ALARMS CRIT= 0 MAJR= 0 MINR= 0 ACTIVE ALARMS CRIT= 0 MAJR= 0 MINR= 0
Command Completed.;
• rept-stat-sys
See the Commands section for the ANSI41 AIQ feature for an example of rept-stat-sys output.• rept-stat-trbl
rept-stat-trbl tekelecstp 10-01-01 10:31:06 EST EAGLE 42.0.0 SEQN UAM AL DEVICE ELEMENT TROUBLE TEXT 0002.0143 * CARD 1113 OAM System release GPL(s) not approved 0003.0313 *C DPC s-010-010-003 DPC is prohibited 0004.0313 *C DPC 010-010-004 DPC is prohibited 0005.0313 *C DPC ps-010-010-005 DPC is prohibited 0006.0313 *C DPC s-252-010-003 DPC is prohibited 0008.0313 *C DPC 252-010-004 DPC is prohibited 0009.0313 *C DPC 252-011-* DPC is prohibited 0011.0176 * SECULOG 1116 Stdby security log – upload required 0019.0236 *C T1PORT 1301,1 REPT-T1F:FAC-T1 LOS failure 0021.0318 ** LSN lsn1 REPT-LKSTO: link set prohibited 0022.0318 ** LSN lsn2 REPT-LKSTO: link set prohibited 0023.0318 ** LSN lsn3 REPT-LKSTO: link set prohibited 0024.0236 ** SLK 1315,A ls11234567 REPT-LKF: not aligned 0025.0236 ** SLK 1316,A ls11345678 REPT-LKF: not aligned 0028.0313 *C DPC 252-010-001 DPC is prohibited 0029.0308 *C SYSTEM Node isolated due to SLK failures
71910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
0036.0455 *C EIR SYSTEM EIR Subsystem is not available 3102.0435 *C LNP SYSTEM LNP Subsystem is disabled 3536.0084 ** EMAP B 7100 IP Connection Unavailable 3538.0179 * EMAP NDC Q.3 association is Unavailable 0002.0143 * CARD 1113 OAM System release GPL(s) not approved 0003.0313 *C DPC s-010-010-003 DPC is prohibited 0004.0313 *C DPC 010-010-004 DPC is prohibited 0005.0313 *C DPC ps-010-010-005 DPC is prohibited 0006.0313 *C DPC s-252-010-003 DPC is prohibited 0008.0313 *C DPC 252-010-004 DPC is prohibited 0009.0313 *C DPC 252-011-* DPC is prohibited 0010.0318 ** LSN lsn4 REPT-LKSTO: link set prohibited 0011.0176 * SECULOG 1116 Stdby security log – upload required 0019.0236 *C T1PORT 1301,1 REPT-T1F:FAC-T1 LOS failure 0021.0318 ** LSN lsn1 REPT-LKSTO: link set prohibited 0022.0318 ** LSN lsn2 REPT-LKSTO: link set prohibited 0023.0318 ** LSN lsn3 REPT-LKSTO: link set prohibited 0024.0236 ** SLK 1315,A ls11234567 REPT-LKF: not aligned 0025.0236 ** SLK 1316,A ls11345678 REPT-LKF: not aligned 0028.0313 *C DPC 252-010-001 DPC is prohibited 0029.0308 *C SYSTEM Node isolated due to SLK failures 0036.0455 *C EIR SYSTEM EIR Subsystem is not available 3102.0435 *C LNP SYSTEM LNP Subsystem is disabled 3536.0084 ** EMAP B 7100 IP Connection Unavailable 3538.0179 * EMAP NDC Q.3 association is Unavailable 3539.0181 *C NDC SYSTEM NDC Subsystem is not available 3540.0203 ** SLK 1201,A lsn1 REPT-LKF: lost data 3541.0203 ** SLK 1201,B lsn4 REPT-LKF: lost data 3542.0203 ** SLK 1202,A lsn2 REPT-LKF: lost data 3543.0203 ** SLK 1202,B lsn4 REPT-LKF: lost data 3544.0202 ** SLK 1203,A lsn3 REPT-LKF: HWP – too many link interrupts 3545.0202 ** SLK 1203,B lsn4 REPT-LKF: HWP – too many link interrupts 2353.0022 * CARD 1107 MCP Clock B for card failed, Clock A normal 3587.0048 * TERMINAL 1 Terminal failed 0007.0110 * IMT SYSTEM Failure detected on one IMT bus 2343.0002 * GPL SYSTEM BPDCM Card is not running approved GPL 4321.0321 * XLIST X-LIST occupancy threshold exceeded 0046.0344 * SEAS X25 Link A1 SEAS PVC unavailable 0045.0348 * SEAS SYSTEM SEAS is at min service limit 0011.0176 * SECULOG 1116 Stdby security log -- upload required 3538.0179 * EMAP NDC Q.3 association is Unavailable 4121.0398 * INP SYSTEM Local Subsystem normal,card(s) abnormal 2354.0516 * MEAS SYSTEM Degraded Mode - 1 card failed 3589.0013 ** CARD 1103 SS7ANSI Card is isolated from the system 2358.0013 ** CARD 1111 MCP Card is isolated from the system 3590.0013 ** CARD 1115 OAM Card is isolated from the system 3590.0514 ** CARD 1115 EOAM Standby MASP is inhibited 0006.0108 ** IMT BUS A Major IMT failure detected Card 1105, 1113, 1115 0012.0390 ** CARD 1109 HMUX Illegal Address Error 0046.0155 * DLK 1104,A1 STPLAN connection unavailable 3591.0208 ** SLK 1101,A ls1 REPT-LKF: APF - lvl-2 T2 expired 3592.0208 ** SLK 1101,B ls2 REPT-LKF: APF - lvl-2 T2 expired 3593.0202 ** SLK 1102,B2 lsname489+ REPT-LKF: HWP -too many link interrupts 3594.0236 ** SLK 1103,A ls3 REPT-LKF: not aligned 3595.0236 ** SLK 1103,B ls4 REPT-LKF: not aligned 3596.0084 ** DLK 1111,A MCP IP Connection Unavailable 0024.0236 ** SLK 1315,A ls11234567 REPT-LKF: not aligned 0025.0236 ** SLK 1316,A ls11345678 REPT-LKF: not aligned 0943.0318 ** LSN ls1 REPT-LKSTO: link set prohibited 0945.0318 ** LSN ls2 REPT-LKSTO: link set prohibited 0948.0318 ** LSN ls4 REPT-LKSTO: link set prohibited 1234.0082 ** FUSE PANEL 11xx Alarm in Fuse Panel 0012.0341 ** OAP A OAP unavailable 0134.0084 ** IP7 LONGSOCKETNAME1 IP Connection Unavailable 3537.0084 ** DLK 1215,A MCP IP Connection Unavailable 3537.0084 ** DSM 1315,A IP Connection Unavailable 3536.0084 ** EMAP B 7100 IP Connection Unavailable 0133.0277 ** IP7 as1 AS Unavailable 0003.0313 *C DPC s-010-010-003 DPC is prohibited 0004.0313 *C DPC 010-010-004 DPC is prohibited 0005.0313 *C DPC ps-010-010-005 DPC is prohibited 0028.0313 *C DPC 252-010-001 DPC is prohibited
72910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
0006.0313 *C DPC s-252-010-003 DPC is prohibited 0008.0313 *C DPC 252-010-004 DPC is prohibited 0009.0313 *C DPC 252-011-* DPC is prohibited 2120.0058 *C CDT 1 Critical customer trouble detected 0029.0308 *C SYSTEM Node isolated due to SLK failures 0040.0128 *C CLOCK SYSTEM All clocks have failed 0050 1114 * HS CLOCK SYSTEM Clock selection mismatch 2109.0331 *C SCCP SYSTEM SCCP is not available 2110.0292 *C GLS SYSTEM GLS is not available 1234.0153 *C SLAN SYSTEM STPLAN not available 0009.0041 *C LSMS Connection A1 LNP DB Maintenance Required 0056.0356 *C LSMS SYSTEM LSMS unavailable 0041.0197 *C CLOCK SYSTEM All High Speed Clocks have failed 0056.0356 *C LSMS SYSTEM LSMS unavailable 0041.0197 *C CLOCK SYSTEM All High Speed Clocks have failed 3102.0435 *C LNP SYSTEM LNP Subsystem is disabled 3539.0181 *C NDC SYSTEM NDC Subsystem is not available 0036.0455 *C EIR SYSTEM EIR Subsystem is not available 0019.0236 *C T1PORT 1301,1 REPT-T1F:FAC-T1 LOS failure 4521.0370 *C MPS A Critical Platform Failure(s) 0045.0469 *C EROUTE SYSTEM All STC cards Unavailable 5648.0382 ** E1PORT 1201,2 REPT-E1F:FAC-E1 LOF failure 0047.0392 ** SECURITY SYSTEM 1211 OA&M IP Security feature status is OFF 0036.0455 *C EIR SYSTEM EIR Subsystem is not available 1235 0114 ** IP TPS SYSTEM System IP TPS threshold exceeded 3684.0013 ** CARD 1305 SS7IPGW Card is isolated from the system 3688.0236 ** SLK 1203,A lslg2 REPT-LKF: not aligned 3692.0318 ** LSN e5e6 REPT-LKSTO: link set prohibited 1088.0539 * DLK 1106,A1 Ethernet Interface Down 1089.0579 * CARD 1106 FC Network Unavailable 1090.0576 ** FCS ALL FC Network Unavailable 3697.0539 ** ENET 1305,A Ethernet Interface Down 3698.0539 ** ENET 1305,B Ethernet Interface Down 3699.0539 ** ENET 1307,B Ethernet Interface Down 3700.0536 * IP7 assoc1234567890 IP Connection Excess Retransmits 0915.0541 *C RTD SYSTEM MSU cksum error threshold exceeded 0002.0520 *C Frame power usage reached LVL3 0056.0528 *C GFLEX SERVICE Service is not available 0056.0528 *C GPORT SERVICE Service is not available 0056.0528 *C MNP SERVICE Service is not available 0044.0558 *C RSN RSF Routeset is prohibited 0044.0534 *C RTX 001-101-001 RTX is prohibited 0916.0565 *C ATINPQ SYSTEM ATINPQ Subsystem is not available 0917.0537 ** ENET 1112,B Ethernet error threshold exceeded 0189.0084 ** DLK 1104,A EROUTE IP Connection Unavailable
Command Completed.;
Extending IPSG Ethernet alarms to all Eagle applications that run on cards supportingEthernet interface
Ethernet Unsolicited Alarm Messages (UAMs) that are supported by the IPSG card can be used by allcards that have Ethernet interfaces and that are running the EROUTE, ERTHC, IPS, IPSHC, MCP,SCCPHC, SLANHC, STPLAN, or VSCCP application.
Commands• inh/unhb-alm—Enhanced to support the appropriate EAGLE applications.• rept-stat-card—Enhanced to support the appropriate EAGLE applications. The output for
detailed reports is updated to show IP link status.
Example 1 shows a brief report for an STC card.
73910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
rept-stat-card:loc=1107 rlghncxa03w 10-01-09 16:35:57 IST EAGLE 42.0.0 CARD VERSION TYPE GPL PST SST AST 1107 128-015-000 STC EROUTE IS-NR Active ----- ALARM STATUS = No Alarms. BPDCM GPL version = 128-108-000 IMT BUS A = Conn IMT BUS B = Conn CLOCK A = Active CLOCK B = Idle CLOCK I = Idle MBD BIP STATUS = Valid MOTHER BOARD ID = Invalid DBD STATUS = Valid DBD TYPE = Invalid DBD MEMORY SIZE = 512M HW VERIFICATION CODE = ---- EROUTE % OCCUP = 0% NTP broadcast = VALID Command Completed.;
Example 2 shows a full report for an STC card.rept-stat-card:loc=1107:mode=full rlghncxa03w 10-01-09 16:35:57 IST EAGLE 42.0.0 CARD VERSION TYPE GPL PST SST AST 1107 128-015-000 STC EROUTE IS-NR Active ----- ALARM STATUS = No Alarms. BPDCM GPL version = 128-108-000 IMT BUS A = Conn IMT BUS B = Conn CLOCK A = Active CLOCK B = Idle CLOCK I = Idle MBD BIP STATUS = Valid MOTHER BOARD ID = Invalid DBD STATUS = Valid DBD TYPE = Invalid DBD MEMORY SIZE = 512M HW VERIFICATION CODE = ---- EROUTE % OCCUP = 0% NTP broadcast = VALID IPLNK STATUS IPLNK IPADDR STATUS PST A --------------- DOWN OOS-MT B 192.168.63.45 UP IS-NR STC IP CONNECTION PORT PST SST A OOS-MT Unavail B IS-NR Active
Command Completed.;
Example 3 shows a brief report for an MCPM card.rept-stat-card:loc=1105 rlghncxa03w 10-01-04 15:10:19 EST EAGLE 42.0.0 CARD VERSION TYPE GPL PST SST AST 1105 128-001-000 EDSM MCP IS-NR Idle ----- ALARM STATUS = No Alarms. BPDCM GPL VERSION = 128-001-000 IMT BUS A = Conn IMT BUS B = Conn
Command Completed.;
Example 4 shows a full report for an MCPM card.
74910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
rept-stat-card:loc=1105:loc=full rlghncxa03w 10-01-09 16:35:57 IST EAGLE 42.0.0 CARD VERSION TYPE GPL PST SST AST 1105 132-049-000 EDSM MCP IS-NR Active ----- ALARM STATUS = No Alarms BPDCM GPL VERSION = 128-001-000 IMT BUS A = Conn IMT BUS B = Conn CLOCK A = Active CLOCK B = Fault CLOCK I = Idle MBD BIP STATUS = valid MOTHER BOARD ID = SS EDCM DBD STATUS = Valid DBD TYPE = MEM DBD MEMORY SIZE = 2048M HW VERIFICATION CODE = ---- IPLNK STATUS IPLNK IPADDR STATUS PST A 10.254.101.92 UP IS-NR MCP IP CONNECTION PORT PST SST A IS-NR Active
Command Completed.;
Example 5 shows a full report for a card running the IPGWI application.rept-stat-card:loc=1301:mode=full rlghncxa03w 10-01-04 15:10:19 EST EAGLE 42.0.0 CARD VERSION TYPE GPL PST SST AST 1301 128-001-000 DCM IPGWI IS-NR Active ----- ALARM STATUS = No Alarms. BPDCM GPL = 128-001-000 IMT BUS A = Conn IMT BUS B = Conn CLOCK A = Active CLOCK B = Idle CLOCK I = idle MBD BIP STATUS = Valid MOTHER BOARD ID = SS EDCM DBD STATUS = Valid DBD TYPE = Ivalid DBD MEMORY SIZE = 0M HW VERIFICATION CODE = ---- SIGNALING LINK STATUS SLK PST LS CLLI E5IS A OOS-MT-DSBLD lsi113 ----------- INACTIVE IPLNK STATUS IPLNK IPADDR STATUS PST A --------------- ---- ---- B --------------- ---- ---- ASSOCIATION STATUS ANAME PST SST ASPID TVG STATUS SNM TVG RESULT = 24 hr: ------, 5 min: ------ SLAN TVG RESULT = 24 hr: ------, 5 min: ------ SCCP TVG RESULT = 24 hr: ------, 5 min: ------ INM TVG RESULT = 24 hr: ------, 5 min: ------
Command Completed.;
Example 5 shows a full report for an E5-STC card.rept-stat-card:loc=1103:mode=full rlghncxa03w 10-01-09 16:35:57 IST EAGLE 42.0.0 CARD VERSION TYPE GPL PST SST AST 1102 005-049-001 STC ERTHC IS-NR Active ----- ALARM STATUS = No Alarms.
75910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
IMTPCI GPL version = 132-048-000 BLVXW6 GPL version = 005-049-001 BLDIAG6 GPL version = 005-049-001 BLBEPM GPL version = 005-049-001 BLCPLD GPL version = 005-049-001 IMT BUS A = Conn IMT BUS B = Conn CLOCK A = Fault CLOCK B = Fault CLOCK I = Idle MBD BIP STATUS = Valid MOTHER BOARD ID = EPM A DBD STATUS = Valid DBD TYPE = 1G ENET DBD MEMORY SIZE = 512M HW VERIFICATION CODE = ---- CURRENT TEMPERATURE = 35C ( 95F) PEAK TEMPERATURE: = 35C ( 95F) [02-04-18 19:53] EROUTE % OCCUP = 0% SOCKET = INACTIVE NTP broadcast = VALID IPLNK STATUS IPLNK IPADDR STATUS PST A 192.168.210.166 UP IS-NR B --------------- DOWN OOS-MT STC IP CONNECTION PORT PST SST A IS-NR Active B OOS-MT Unavail
Command Completed.;
Example 6 shows a full report for an E5-SLAN card.rept-stat-card:loc=1103:mode=full rlghncxa03w 10-01-09 16:35:57 IST EAGLE 42.0.0 CARD VERSION TYPE GPL PST SST AST 1103 132-049-000 DCM SLANHC IS-NR Active ----- ALARM STATUS = No Alarms. IMTPCI GPL version = 132-048-000 BLVXW6 GPL version = 018-049-000 BLDIAG6 GPL version = 132-040-000 BLBEPM GPL version = 132-048-000 BLCPLD GPL version = 132-020-000 IMT BUS A = Conn IMT BUS B = Conn CLOCK A = Active CLOCK B = Idle CLOCK I = Idle MBD BIP STATUS = Valid MOTHER BOARD ID = EPM A DBD STATUS = Valid DBD TYPE = 1G ENET DBD MEMORY SIZE = 512M HW VERIFICATION CODE = ---- CURRENT TEMPERATURE = 50C (122F) PEAK TEMPERATURE: = 50C (122F) [02-09-14 14:49] IPLNK STATUS IPLNK IPADDR STATUS PST A 10.220.9.9 UP IS-NR DLK IP CONNECTION PORT PST SST AST A IS-NR Active ----- SLAN % EAGLE CAPACITY = 0% SLAN % HOST CAPACITY = 0%
Command Completed.;
Example 7 shows a full report for an E5-SM4G card.
76910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
rept-stat-card:loc=6111:mode=full rlghncxa03w 10-01-09 16:35:57 IST EAGLE 42.0.0 CARD VERSION TYPE GPL PST SST AST 6111 132-049-000 DSM SCCPHC IS-NR Active ----- ALARM STATUS = No Alarms. IMTPCI GPL version = 132-048-000 BLVXW6 GPL version = 018-049-000 BLDIAG6 GPL version = 132-040-000 BLBSMG GPL version = 132-048-000 BLCPLD GPL version = 132-020-000 IMT BUS A = Conn IMT BUS B = Conn CLOCK A = Active CLOCK B = Idle CLOCK I = Idle MBD BIP STATUS = Valid MOTHER BOARD ID = SMXG A DBD STATUS = Valid DBD TYPE = 1G ENET DBD MEMORY SIZE = 4096M HW VERIFICATION CODE = ---- CURRENT TEMPERATURE = 31C ( 88F) PEAK TEMPERATURE: = 32C ( 90F) [07-04-12 15:55] SCCP % OCCUP = 1% TVG STATUS SNM TVG RESULT = 24 hr: ------, 5 min: ------ INM TVG RESULT = 24 hr: ------, 5 min: ------ IPLNK STATUS IPLNK IPADDR STATUS PST A 10.220.9.9 UP IS-NR B 10.220.9.8 UP IS-NR DSM IP CONNECTION PORT PST SST A OOS-MT Unavail B OOS-MT Unavail
Command Completed.;
• rept-stat-dlk—Enhanced to support the appropriate EAGLE applications.• rept-stat-enet—Enhanced to display Ethernet status for all cards in the system with configured
Ethernet interfaces.• rept-stat-mon—Enhanced to increase readability of the output.
rept-stat-mon:type=eroute:loc=1101 rlghncxa03w 10-01-09 16:35:57 IST EAGLE 42.0.0 CARD VERSION TYPE PST SST AST 1101 052-008-000 STC IS-NR Active ----- CARD ALARM STATUS = No Alarms. TOTAL CPU USAGE = 28% NTP broadcast = VALID STC IP CONNECTION PORT PST SST A OOS-MT Unavail B OOS-MT Unavail
Command Completed.;
• rept-stat-trbl—Enhanced to display Ethernet and IP connection errors.
See the Commands section for the EOAP Hardware Maintenance Phase enhancement for an exampleof the rept-stat-trbl output.
77910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
HIPR2: Add Extended BERT parameter to TST-IMT command
The HIPR2 card is enhanced to support an Extended Bit Error Rate Test (BERT). A BERT is automaticallyperformed and runs for a few seconds during initialization of an IMT bus that contains all HIPR2cards.
The Extended BERT can be performed for a configurable period during installation to verify that thereare no signal integrity issues.
The Target IMT bus must contain HIPR2 cards only, and the HIPR2 cards must be in the In-ServiceNormal state before an Extended BERT can be performed.
HIPR2 - retrieval of extended statistics
An extended statistics profile can be obtained from a single HIPR2 card or from all HIPR2 cards in asystem.
Commands• act-ftp-trns—Enhanced to transfer the Extended Statistics table.• canc/dact-cmd—Enhanced to include the copy-ext-stats command.• init/copy-ext-stats—Added to copy and collect the HIPR2 Extended Statistics information.
HIPR2 rate change optimization
The speed of the IMT rate change that occurs when the HIPR2 High Rate Mode feature is turned onor off is increased by removing the use of timers as a controlling mechanism. IMT bus events are usedto detect the need for an IMT rate change and to control the IMT rate change protocol.
Include optional CUG parameter in SRI_ACK
The Include optional CUG parameter in SRI_ACK functionality allows the Closed User Group(CUG)-CheckInfo parameter (if existing) in an incoming SRI message to be included in the outgoingSRI_ACK message.
The CUG parameter must be encoded in a definite length format and the parameter length must be30 bytes or less before the entire parameter can be included in the SRI_ACK message. If the value isgreater than 30 bytes, then only the CUG-Interlock and CUG-OutgoingAccess parameters are includedin the SRI_ACK message. The CUG-ExtensionContainer is not included.
Feature Control RequirementsThe G-Port feature (Part Number 893-0172-01) or IS41 GSM Migration feature (Part Number 893-0173-01)must be enabled before the CUG parameter functionality can be provisioned.
CommandsThe chg/rtrv-gsmopts commands are enhanced to provision and display the CUG functionalityby specifying the encodecug option for the on and off parameters. This option has a default of OFF.See the Commands section for the CRP for SRIs without HomeRN feature for an example of thertrv-gsmopts command output.
78910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Increase CSL GT List for IDPR and IAR
The maximum number of entries for the Global Title Common Screening List is increased to 500 forthe Info Analyzed Relay Base (Part Number 893-0342-01) and Prepaid IDP Query Relay (Part Number893-0160-01) features.
The ent/rtrv-csl commands are enhanced to support the increased entries.
Option to suppress NumberPortabilityStatusIndicator in SRI_ACK
The Option to suppress NumberPortabilityStatusIndicator in SRI_ACK feature allows the NumberPortability Status Indicator (NPSI) to be omitted from all SRI_ACK messages.
Feature Control RequirementsThe G-Port (Part Number 893-0172-01) or IS41 GSM Migration (Part Number 893-0173-01) featuremust be enabled before the functionality to suppress the NPSI can be provisioned.
CommandsThe chg/rtrv-gsmopts commands are enhanced to provision and display the option to suppressNPSI. This functionality is provisioned by specifying the encodenps option for the on and offparameters. This option has a default of ON. See the Commands section for the CRP for SRIs withoutHomeRN feature for an example of rtrv-gsmopts command output.
Removal of X25 Gateway Support from EAGLE Code
The X25 Gateway is no longer supported. As of Release 42.0, the gateway is removed from the codebase. Changes include:
• The x252000 and x25g feature bits are obsolete.
rtrv-feat tekelecstp 09-12-06 16:50:04 EST EAGLE 42.0.0 EAGLE FEATURE LIST
GTT = off GWS = off NRT = off LAN = off CRMD = off SEAS = off LFS = off MTPRS = off FAN = off DSTN5000 = off WNP = off CNCF = off TLNP = off SCCPCNV = off TCAPCNV = off IPISUP = off PLNP = off NCR = off ITUMTPRS = off SLSOCB = off EGTT = off VGTT = off MPC = off ITUDUPPC = off MEASPLAT = off TSCSYNC = off E5IS = off;
• The SS7GX25 application is no longer supported.• X.25 destinations, domains, linksets, routes are no longer supported.• The rtrv-x25-dstn and rtrv-x25-slk tables are no longer supported.• All X25 commands are obsolete.
79910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Route SRI_SM for non-local or ported out subscribers using GTT
The Route SRI_SM for non-local or ported-out subscribers using GTT functionality allows SRI_SMmessages to be modified so that the message can be routed to an alternate network using Global TitleTranslation (GTT). This functionality allows processing to occur when the DN in the database isassociated with both the Service Point (SP) and Generic Routing Number (GRN) network elementsand the GRN is not present in the EAGLE 5 ISS HomeRN table, or when the subscriber is ported outand associated with the RN.
The message is altered by changing the SCCP Called Party Address to the country code (CC) + GRN+ Directory Number (DN) or to CC + RN + DN. This alteration allows GTT to redirect the query toan alternate network. If a CC is not located in the DN, then the SCCP CdPA is converted to a GRN +DN or RN + DN format.
This conversion is performed only on ITU TCAP Begin SRI_SM MSUs.
If the MT-Based GSM SMS NP or the IS41 GSM Migration feature generates a response for the SRI_SMmessage then this functionality is not applicable.
Feature Control RequirementsThe G-Port (Part Number 893-0172-01) or IS41 GSM Migration (Part Number 893-0173-01) featuremust be enabled before the SRI_SM message routing functionality can be provisioned. One of thefeatures must be turned on before processing can occur.
CommandsThe chg/rtrv-gsmopts commands are enhanced to provision and display the SRI_SM messagerouting functionality. This functionality is provisioned by specifying the srismgttrtg option for the onand off parameters. This option has a default of OFF. See the Commands section of the CRP for SRIswithout HomeRN feature for an example of rtrv-gsmopts command output.
Support >9 SM4G cards with LNP 384 Million
Up to 18 E5-SM4G cards can be provisioned in the EAGLE 5 ISS for LNP feature quantities of 12 - 384million numbers when ELAP 9.0 is used.
This functionality impacts the TPS quantities implemented by the E5-SM4G Throughput Capacityfeature. Table 2: TPS Capacities shows the revised TPS capacities for each E5-SM4G Throughput Capacityquantity.
Update to the chg-stpopts Command
The chg-stpopts command is enhanced to turn the ansigflex, archbldid, cnvcgda, cnvcgdi, cnvcgdn,cnvcgdn24, gtcnvdflt, critalminh, dispactalms, mtplprst, mtplti, mtprsi, rptlnpmrss, rstrdev anduimrd functionalities on and off using on and off parameters and a comma-separated mnemonic listof options instead of the individual parameters.
For 2 releases, the functionalities can be turned on and off using the individual parameters or the onand off parameters and mnemonic list. After 2 releases, the on and off parameters must be used.
80910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Update to the dbg-ddb Command
The dbg-ddb command is enhanced to display multiple mismatch entries between cards, whenappropriate.dbg-ddb:loc=1205:rloc=1207:action=aud:tbl=rte:audtype=uc tekelecstp 10-01-28 16:37:11 GMT EAGLE5 42.0.0 dbg-ddb:loc=1205:rloc=1207:action=aud:tbl=rte:audtype=uc Command entered at terminal #4.;
tekelecstp 10-01-28 16:37:11 GMT EAGLE5 42.0.0 User Message sent to location 1205.;
tekelecstp 10-01-28 16:37:11 GMT EAGLE5 42.0.0 Card[1205]->card[1207] (Tbl:0) TblAuditDone:TotalMisses:h'2 FirstMiss:h'0;
tekelecstp 10-01-28 16:37:11 GMT EAGLE5 42.0.0 [SeqNo: 1] [1205] [Route:h'0] Chksum h'320b at h'8fc3b0 (75 bytes) PC: 001-001-001 LstRt:0 CmbRt:6 Dyn:h'1 TFC:0 Xlst:0 MOBR:0 NAdj:1 3 3 3 3 3 NmTFR:0 PrevSt:1;
tekelecstp 10-01-28 16:37:11 GMT EAGLE5 42.0.0 [SeqNo: 1] [1205] nway: 0 cost_grp(0-5): c7 c6 c6 c6 c6 c6 rte_used(0-5): c0 36 36 36 36 36 curr_cost_grp: 0 prev_cost_grp 0 SRT:h'88079c (28 bytes) AKT:h'8bb43c (12 bytes);
tekelecstp 10-01-28 16:37:11 GMT EAGLE5 42.0.0 [SeqNo: 2] [1205] [Route:h'1] Chksum h'c96e at h'8fc3fb (75 bytes) PC: 001-001-002 LstRt:0 CmbRt:6 Dyn:h'1 TFC:0 Xlst:0 MOBR:0 NAdj:1 3 3 3 3 3 NmTFR:0 PrevSt:1;
tekelecstp 10-01-28 16:37:11 GMT EAGLE5 42.0.0 [SeqNo: 2] [1205] nway: 0 cost_grp(0-5): c7 c6 c6 c6 c6 c6 rte_used(0-5): c0 36 36 36 36 36 curr_cost_grp: 0 prev_cost_grp 0 SRT:h'8807b8 (28 bytes) AKT:h'8bb448 (12 bytes);
tekelecstp 10-01-28 16:37:11 GMT EAGLE5 42.0.0 [SeqNo: 1] [1207] [Route:h'0] Chksum h'cecc at h'9688ea0 (243 bytes) PC: 001-001-001 LstRt:0 CmbRt:6 Dyn:h'1 TFC:0 Xlst:0 MOBR:0 NAdj:1 3 3 3 3 3 NmTFR:0 PrevSt:1;
tekelecstp 10-01-28 16:37:11 GMT EAGLE5 42.0.0 [SeqNo: 1] [1207] nway: 0 cost_grp(0-5): c8 c6 c6 c6 c6 c6 rte_used(0-5): c0 46 36 36 36 36 curr_cost_grp: 0 prev_cost_grp 0 SRT:h'95148e0 (28 bytes) AKT:h'9575980 (12 bytes);
tekelecstp 10-01-28 16:37:11 GMT EAGLE5 42.0.0 [SeqNo: 2] [1207] [Route:h'1] Chksum h'662f at h'9688f93 (243 bytes) PC: 001-001-002 LstRt:0 CmbRt:6 Dyn:h'1 TFC:0 Xlst:0 MOBR:0 NAdj:1 3 3 3 3 3 NmTFR:0 PrevSt:1;
tekelecstp 10-01-28 16:37:11 GMT EAGLE5 42.0.0 [SeqNo: 2] [1207] nway: 0 cost_grp(0-5): c8 c6 c6 c6 c6 c6 rte_used(0-5): c0 46 36 36 36 36 curr_cost_grp: 0 prev_cost_grp 0 SRT:h'95148fc (28 bytes) AKT:h'957598c (12 bytes);
81910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Update to the inh-imt Command
The inh-imt command is updated to allow an IMT bus to be inhibited when an IMT rate changesequence is in progress.
Update to the msutrace Command
The full version of the Help text for the msutrace command is updated to accurately reflect thecurrent code. The abbreviated version of the Help text is updated to increase readability.
Example 1 displays the abbreviated version of the help text.pass:loc=1105:cmd="msutrace -h"Command Accepted - Processing
tekelecstp 09-12-06 19:41:33 EST EAGLE5 42.0.0 pass:loc=1105:cmd="msutrace -h" Command entered at terminal #1.;
tekelecstp 09-12-06 19:41:33 EST EAGLE5 42.0.0 PASS: Command sent to card;
tekelecstp 09-12-06 19:41:33 EST EAGLE5 42.0.0
Usage: msutrace [-a action_cmd] [-g get_cmd] [ [-x rc] | [-k [rtkey] [-p pctype] [-t keytype]] ] [-m mode] [-h [full]]
Options: -a action_cmd: an Action Command -g get_cmd: a Get Command -x routing key report using routing context -k routing key report using MTP3 parameters rtkey :: ([dpc][:si][:opc | :ssn][:cics][:cice]) -p pctype :: (ANSI, ITUI, ITUN, ITUN24, ITUIS, ITUNS) -t routing key type keytype :: (<full>, partial, default) -m mode: mode for qualifying MSUs captured = [normerr | all] -h displays this message (brief or full)
get_cmd: [config | trace] config config trace trace
action_cmd: [acttrace | chgfilter | clrtrace | dacttrace] acttrace acttrace chgfilter chgfilter [<fltrkey>] | [-m mode] (at least 1 required) (valid fltrkey should be present either before specifying mode or in the same command) clrtrace clrtrace dacttrace dacttrace
<fltrkey>: [ [-x rc] | [-k [rtkey] [-p pctype] [-t keytype]] ] (see 'msutrace -h full' for complete description)
;
tekelecstp 09-11-06 19:41:33 EST EAGLE5 42.0.0
MSUTRACE command complete
;
Example 2 displays the full version of the Help text.
82910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
pass:loc=1105:cmd="msutrace –h full" Command Accepted - Processing
tekelecstp 09-12-06 19:41:33 EST EAGLE5 42.0.0 pass:loc=1105:cmd="msutrace –h full" Command entered at terminal #1.;
<CLLI> <date> <time> <timezone> <product> <release ID> PASS: Command sent to card;
tekelecstp 09-12-06 19:41:33 EST EAGLE5 42.0.0
Usage: msutrace [-a action_cmd] [-g get_cmd] [ [-x rc] | [-k [rtkey] [-p pctype] [-t keytype]] ] [-m mode] [-h [full]]
Options: -a action_cmd: an Action Command -g get_cmd: a Get Command -x routing key report using routing context -k routing key report using MTP3 parameters rtkey :: ([dpc][:si][:opc | :ssn][:cics][:cice]) -p pctype :: (ANSI, ITUI, ITUN, ITUN24, ITUIS, ITUNS) -t routing key type keytype :: (<full>, partial, default) -m mode: mode for qualifying MSUs captured = [normerr | all] -h displays this message (brief or full)
get_cmd: [config | trace] config Display the current MSUTRACE settings: trace On/Off status, filter settings, and trace buffers used/available. ex: msutrace -g config
trace Display content of trace buffers containing captured MSU data ex: msutrace -g trace
action_cmd: [acttrace | chgfilter | clrtrace | dacttrace ] acttrace Activate (turn-on) MSU-tracing. ex: msutrace -a acttrace
chgfilter chgfilter [<fltrkey>] | [-m mode] (at least 1 required) (valid fltrkey should be present either before specifying mode or in the same command) Change filter used to qualify which MSUs are placed in trace buffers: Flow of command should be Either entering filter key before specifying mode : ex: To trace MSUs based on MSU content: msutrace -a chgfilter <fltrkey> ex: To only trace MSUs with Normalization errors: msutrace -a chgfilter -m normerr ex: To trace all MSUs regardless of error conditions: msutrace -a chgfilter -m all Or entering filter key along with mode: ex: To trace MSUs based on MSU content with Normalization errors: msutrace -a chgfilter <fltrkey> -m normerr ex: To trace MSUs based on MSU content regardless of error conditions: msutrace -a chgfilter <fltrkey> -m all
clrtrace Clear all data from trace buffers. ex: msutrace -a clrtrace
dacttrace Deactivate (turn-off) MSU-tracing. ex: msutrace -a dacttrace
-k option details:
83910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Use the -p option along with -k to specify the SS7 network domain and point code format for the network. The SS7IPGW and IPLIM default pctype is ANSI. The IPGWI and IPLIMI default pctype is ITUI.
For IPSG both ANSI and ITU network point code formats are eligible for trace when the default filter or an SI only filter is specified. The IPSG default pctype is ANSI when the filter contains OPC or DPC and the -p option is not specified.
Network PC Format Notes ------- --------- -------------------------------------- ANSI N-C-M ITUN N Non-Spare ITU National, no group code ITUN N-GC Non-Spare ITU National with group code ITUI Z-A-I Non-Spare ITU International ITUN24 N-C-M Non-Spare ITU National, 24-bits ITUNS N Spare ITU National, no group code ITUNS N-GC Spare ITU National with group code ITUIS Z-A-I Spare ITU International
Use the -t option along with -k to specify certain MTP3 and user part MSU fields as wildcards for the routing key or LS.
SS7 Traffic Partition RTKEY/MTP3 Parameter Example --------------------------------- ---------------------------- Any User Part to DPC 1-1-1 -k 1-1-1 -t partial SCCP to DPC 1-1-1 -k 1-1-1:3 -t partial ISUP to DPC 1-1-1 -k 1-1-1:5 -t partial TUP to DPC 1-1-1 -k 1-1-1:4 -t partial QBICC to DPC 1-1-1 -k 1-1-1:13 -t partial SI [0-2,6-12,14,15] to DPC 1-1-1 -k 1-1-1:SI SCCP SSN 5 to DPC 1-1-1 -k 1-1-1:3:5 ISUP to DPC 1-1-1 from OPC 2-2-2 -k 1-1-1:5:2-2-2 -t partial TUP to DPC 1-1-1 from OPC 2-2-2 -k 1-1-1:4:2-2-2 -t partial QBICC to DPC 1-1-1 from OPC 2-2-2 -k 1-1-1:13:2-2-2 -t partial ISUP CIC 1 to 1-1-1 from 2-2-2 -k 1-1-1:5:2-2-2:1 TUP CIC 1 to 1-1-1 from 2-2-2 -k 1-1-1:4:2-2-2:1 QBICC CIC 1 to 1-1-1 from 2-2-2 -k 1-1-1:13:2-2-2:1 ISUP CIC 0-5 to 1-1-1 from 2-2-2 -k 1-1-1:5:2-2-2:0:5 TUP CIC 0-5 to 1-1-1 from 2-2-2 -k 1-1-1:4:2-2-2:0:5 QBICC CIC 0-5 to 1-1-1 from 2-2-2 -k 1-1-1:13:2-2-2:0:5 Default Routing Key -k -t default Any User Part to DPC=LS APC -x LS RCONTEXT (IPSG Only)
;
tekelecstp 09-12-06 19:41:33 EST EAGLE5 42.0.0
MSUTRACE command complete
;
Update to the netstat -i Command
The netstat -i command is enhanced to display complete information for the Fast Copy GEIinterfaces.
Example 1 displays output for IP GPLs on the E5-ENET hardware platform.pass:loc=1111:cmd="netstat -i" e1030703 09-12-13 19:15:31 EST EAGLE 42.0.0 pass:loc=1111:cmd="netstat -i" Command entered at terminal #17.;
e1030703 09-12-13 19:15:31 EST EAGLE 42.0.0 PASS: Command sent to card;
84910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Command Accepted - Processing e1030703 09-12-13 19:15:38 EST EAGLE 42.0.0
NETSTAT command complete
;Command Executed e1030703 09-12-13 19:15:31 EST EAGLE 42.0.0 SDS Shell Output
-> tklc_ifShow lo (unit number 0): Flags: (0x48049) UP LOOPBACK MULTICAST TRAILERS ARP RUNNING INET_UP Type: SOFTWARE_LOOPBACK inet: 127.0.0.1 Netmask 0xff000000 Subnetmask 0xff000000 Metric is 0 Maximum Transfer Unit size is 1536 0 packets received; 1 packets sent 0 multicast packets received 0 multicast packets sent 0 input errors; 0 output errors 0 collisions; 0 dropped 0 output queue drops DPLend (unit number 0): Flags: (0x60043) UP BROADCAST ARP RUNNING INET_UP Type: ETHERNET_CSMACD inet: 172.20.48.249 Broadcast address: 172.20.51.255 Netmask 0xffff0000 Subnetmask 0xfffffc00 Ethernet address is 00:00:00:00:00:f9 Metric is 0 Maximum Transfer Unit size is 485 84 octets received 56 octets sent 2 unicast packets received 2 unicast packets sent 0 non-unicast packets received 0 non-unicast packets sent 0 incoming packets discarded 0 outgoing packets discarded 0 incoming errors 0 outgoing errors 0 unknown protos 0 collisions; 0 dropped 0 output queue drops gei (unit number 2): Flags: (0x70043) UP BROADCAST ARP RUNNING INET_UP PHY Flags: (0x12212) AUTONEG 100MB FDX DIX Type: ETHERNET_CSMACD inet: 192.168.54.117 Broadcast address: 192.168.54.255 Netmask 0xffffff00 Subnetmask 0xffffff00 Ethernet address is 00:00:17:0d:46:bc Metric is 0 Maximum Transfer Unit size is 1500 320 octets received 128 octets sent 0 unicast packets received 0 unicast packets sent 0 multicast packets received 0 multicast packets sent 5 broadcast packets received 2 broadcast packets sent 0 incoming packets discarded 0 outgoing packets discarded 0 incoming errors 0 outgoing errors 0 unknown protos 0 collisions; 0 dropped 0 output queue drops gei (unit number 0): Flags: (0x30002) DOWN BROADCAST ARP
85910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
PHY Flags: (0x2221) AUTONEG DIX Type: ETHERNET_CSMACD inet: 192.168.51.42 Broadcast address: 192.168.51.255 Netmask 0xffffff00 Subnetmask 0xffffff00 Ethernet address is 00:00:17:0d:48:64 Metric is 0 Maximum Transfer Unit size is 1500 0 octets received 64 octets sent 0 unicast packets received 0 unicast packets sent 0 multicast packets received 0 multicast packets sent 0 broadcast packets received 1 broadcast packets sent 0 incoming packets discarded 0 outgoing packets discarded 0 incoming errors 0 outgoing errors 0 unknown protos 0 collisions; 0 dropped 0 output queue drops gei (unit number 3): Flags: (0x78042) DOWN BROADCAST MULTICAST ARP RUNNING INET_UP PHY Flags: (0x2224) AUTONEG DIX Type: ETHERNET_CSMACD inet: 172.21.48.249 Broadcast address: 172.21.49.255 Netmask 0xffff0000 Subnetmask 0xfffffe00 Ethernet address is 00:00:17:0d:46:bd Metric is 0 Maximum Transfer Unit size is 2000 0 octets received 0 octets sent 0 unicast packets received 0 unicast packets sent 0 multicast packets received 0 multicast packets sent 0 broadcast packets received 0 broadcast packets sent 0 incoming packets discarded 0 outgoing packets discarded 0 incoming errors 0 outgoing errors 0 unknown protos 0 collisions; 0 dropped 0 output queue drops gei (unit number 1): Flags: (0x78042) DOWN BROADCAST MULTICAST ARP RUNNING INET_UP PHY Flags: (0x2221) AUTONEG DIX Type: ETHERNET_CSMACD inet: 172.22.48.249 Broadcast address: 172.22.49.255 Netmask 0xffff0000 Subnetmask 0xfffffe00 Ethernet address is 00:00:17:0d:48:65 Metric is 0 Maximum Transfer Unit size is 2000 0 octets received 0 octets sent 0 unicast packets received 0 unicast packets sent 0 multicast packets received 0 multicast packets sent 0 broadcast packets received 0 broadcast packets sent 0 incoming packets discarded 0 outgoing packets discarded 0 incoming errors 0 outgoing errors 0 unknown protos 0 collisions; 0 dropped 0 output queue drops
86910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
value = 26 = 0x1a; e1030703 09-12-13 19:15:38 EST EAGLE 42.0.0
;
e1030703 09-12-13 19:15:38 EST EAGLE 42.0.0
NETSTAT command complete
;
Example 2 displays output for E5-SM4G cards. These cards support both BOND and GEI interfaces.pass:loc=1111:cmd="netstat -i" e1030703 09-12-13 19:15:31 EST EAGLE 42.0.0 pass:loc=1111:cmd="netstat -i" Command entered at terminal #17.;
e1030703 09-12-13 19:15:31 EST EAGLE 42.0.0 PASS: Command sent to card;Command Accepted - Processing e1030703 09-12-13 19:15:38 EST EAGLE 42.0.0
NETSTAT command complete
;Command Executed e1030703 09-12-13 19:15:31 EST EAGLE 42.0.0 SDS Shell Output
-> tklc_ifShow lo (unit number 0): Flags: (0x48049) UP LOOPBACK MULTICAST TRAILERS ARP RUNNING INET_UP Type: SOFTWARE_LOOPBACK inet: 127.0.0.1 Netmask 0xff000000 Subnetmask 0xff000000 Metric is 0 Maximum Transfer Unit size is 1536 0 packets received; 1 packets sent 0 multicast packets received 0 multicast packets sent 0 input errors; 0 output errors 0 collisions; 0 dropped 0 output queue drops DPLend (unit number 0): Flags: (0x20043) UP BROADCAST ARP RUNNING Type: ETHERNET_CSMACD Ethernet address is 00:00:00:00:00:00 Metric is 0 Maximum Transfer Unit size is 485 0 octets received 0 octets sent 0 unicast packets received 0 unicast packets sent 0 non-unicast packets received 0 non-unicast packets sent 0 incoming packets discarded 0 outgoing packets discarded 0 incoming errors 0 outgoing errors 0 unknown protos 0 collisions; 0 dropped 0 output queue drops gei (unit number 0): Flags: (0x78042) DOWN BROADCAST MULTICAST ARP RUNNING INET_UP PHY Flags (0x2022) 100MB HDX DIX Type: ETHERNET_CSMACD inet: 192.168.122.4 Broadcast address: 192.168.122.255 Netmask 0xffffff00 Subnetmask 0xffffff00
87910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Ethernet address is 00:00:17:0d:0f:3a Metric is 0 Maximum Transfer Unit size is 1500 0 octets received 0 octets sent 0 unicast packets received 0 unicast packets sent 0 multicast packets received 0 multicast packets sent 0 broadcast packets received 0 broadcast packets sent 0 incoming packets discarded 0 outgoing packets discarded 0 incoming errors 0 outgoing errors 0 unknown protos 0 collisions; 0 dropped 0 output queue drops gei (unit number 1): Flags: (0x78042) DOWN BROADCAST MULTICAST ARP RUNNING INET_UP PHY Flags (0x2021) 10MB HDX DIX Type: ETHERNET_CSMACD inet: 192.168.121.4 Broadcast address: 192.168.121.255 Netmask 0xffffff00 Subnetmask 0xffffff00 Ethernet address is 00:00:17:0d:0f:3b Metric is 0 Maximum Transfer Unit size is 1500 0 octets received 0 octets sent 0 unicast packets received 0 unicast packets sent 0 multicast packets received 0 multicast packets sent 0 broadcast packets received 0 broadcast packets sent 0 incoming packets discarded 0 outgoing packets discarded 0 incoming errors 0 outgoing errors 0 unknown protos 0 collisions; 0 dropped 0 output queue drops Bond (unit number 0): Flags: (0x60043) UP BROADCAST ARP RUNNING INET_UP Type: ETHERNET_CSMACD inet: 192.168.123.4 Broadcast address: 192.168.123.255 Netmask 0xffffff00 Subnetmask 0xffffff00 Ethernet address is 00:00:00:00:00:00 Metric is 0 Maximum Transfer Unit size is 485 0 octets received 0 octets sent 0 unicast packets received 0 unicast packets sent 0 non-unicast packets received 0 non-unicast packets sent 0 incoming packets discarded 0 outgoing packets discarded 0 incoming errors 0 outgoing errors 0 unknown protos 0 collisions; 0 dropped 0 output queue drops value = 26 = 0x1a
;
e1030703 09-12-13 19:15:38 EST EAGLE 42.0.0;
e1030703 09-12-13 19:15:38 EST EAGLE 42.0.0
88910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
NETSTAT command complete
;
Update to the rept-imt-info Command
The hourly statistics code for the rept-imt-info command is updated to display a dash (-) forcounts when an IMT bus is inhibited. The output is also updated to display an asterisk (*) as thestatistics value when at least one MUX card does not respond during IMT statistics collection.
Example 1 displays output when IMT Bus A is inhibited.rept-imt-info:report=hiprerr:sbucket=0 tekelecstp 09-12-04 14:40:39 CST EAGLE 42.0.0 HIPR Summary Report: Summed across all requested cards for each bucket
HIPR Hourly Bucket Statistics
=========================================================================== Bucket Loc Low Speed Statistic BUS A Value BUS B Value ------ ---- ------------------- ----------- ----------- 00 ---- IMT Rx Packet CRC Error - 0 IMT Rx Packet Format Error - 0 IMT Rx Violation Error - 101 IMT Rx Command Error - 0 IMT Rx FIFO Full - 0 IMT Rx FIFO Half Full - 0 IMT Tx FIFO Full - 0 IMT Tx FIFO Half Full - 0
High Speed Statistic BUS A Value BUS B Value -------------------- ----------- ----------- IMT Rx Packet Format Error - 0 IMT Rx Disparity Error - 0 IMT Rx Sync Lost Error - 0 IMT Rx Code Word Error - 0 IMT Rx Packet SOM Before EOM - 0 IMT Rx Packet CRC Error - 0 IMT Bypass FIFO Full - 0 IMT Bypass FIFO Half Full - 0 IMT Rx FIFO Full - 0 IMT Rx FIFO Half Full - 0 IMT Tx FIFO Full - 0 IMT Tx FIFO Half Full - 0 IXP Rx FIFO Full - 0 IXP Rx FIFO Half Full - 0
Misc Speed Statistic BUS A Value BUS B Value -------------------- ----------- ----------- Shelf ID UART Framing Error - 0 Shelf ID UART Overrun Error - 0
HIPR CUMULATIVE Statistics
=========================================================================== Low Speed Statistic BUS A Value BUS B Value ------------------- ----------- ----------- IMT Rx Packet CRC Error - 0 IMT Rx Packet Format Error - 0 IMT Rx Violation Error - 1165 IMT Rx Command Error - 0 IMT Rx FIFO Full - 0 IMT Rx FIFO Half Full - 0 IMT Tx FIFO Full - 0 IMT Tx FIFO Half Full - 1
High Speed Statistic BUS A Value BUS B Value -------------------- ----------- -----------
89910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
IMT Rx Packet Format Error - 0 IMT Rx Disparity Error - 0 IMT Rx Sync Lost Error - 0 IMT Rx Code Word Error - 0 IMT Rx Packet SOM Before EOM - 0 IMT Rx Packet CRC Error - 0 IMT Bypass FIFO Full - 1 IMT Bypass FIFO Half Full - 1 IMT Rx FIFO Full - 0 IMT Rx FIFO Half Full - 0 IMT Tx FIFO Full - 0 IMT Tx FIFO Half Full - 0 IXP Rx FIFO Full - 0 IXP Rx FIFO Half Full - 0
Misc Speed Statistic BUS A Value BUS B Value -------------------- ----------- ----------- Shelf ID UART Framing Error - 35 Shelf ID UART Overrun Error - 0;
Example 2 displays output when at least one card on the IMT Bus does not respond during statisticscollection.rept-imt-info:report=hiprerr:sbucket=0 tekelecstp 09-12-04 14:40:39 CST EAGLE 42.0.0 HIPR Summary Report: Summed across all requested cards for each bucket
HIPR Hourly Bucket Statistics
=========================================================================== Bucket Loc Low Speed Statistic BUS A Value BUS B Value ------ ---- ------------------- ----------- ----------- 00 ---- IMT Rx Packet CRC Error 0 0 IMT Rx Packet Format Error 0 0 IMT Rx Violation Error 128 0 IMT Rx Command Error 0 0 IMT Rx FIFO Full 0 0 IMT Rx FIFO Half Full 0 0 IMT Tx FIFO Full 36 0 IMT Tx FIFO Half Full 182 0
High Speed Statistic BUS A Value BUS B Value -------------------- ----------- ----------- IMT Rx Packet Format Error 0 0 IMT Rx Disparity Error 0 0 IMT Rx Sync Lost Error 0 0 IMT Rx Code Word Error 0 0 IMT Rx Packet SOM Before EOM 0 0 IMT Rx Packet CRC Error 0 0 IMT Bypass FIFO Full 0 0 IMT Bypass FIFO Half Full 0 0 IMT Rx FIFO Full 0 0 IMT Rx FIFO Half Full 0 0 IMT Tx FIFO Full 0 0 IMT Tx FIFO Half Full 0 0 IXP Rx FIFO Full 0 0 IXP Rx FIFO Half Full 0 0
Misc Speed Statistic BUS A Value BUS B Value -------------------- ----------- ----------- Shelf ID UART Framing Error 2 0 Shelf ID UART Overrun Error 0 0
HIPR CUMULATIVE Statistics
=========================================================================== Low Speed Statistic BUS A Value BUS B Value ------------------- ----------- ----------- IMT Rx Packet CRC Error 0 0* IMT Rx Packet Format Error 0 0*
90910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
IMT Rx Violation Error 1415 0* IMT Rx Command Error 0 0* IMT Rx FIFO Full 0 0* IMT Rx FIFO Half Full 0 0* IMT Tx FIFO Full 120 0* IMT Tx FIFO Half Full 1113 0*
High Speed Statistic BUS A Value BUS B Value -------------------- ----------- ----------- IMT Rx Packet Format Error 0 0* IMT Rx Disparity Error 0 0* IMT Rx Sync Lost Error 15 0* IMT Rx Code Word Error 0 0* IMT Rx Packet SOM Before EOM 0 0* IMT Rx Packet CRC Error 0 0* IMT Bypass FIFO Full 1 0* IMT Bypass FIFO Half Full 1 0* IMT Rx FIFO Full 0 0* IMT Rx FIFO Half Full 0 0* IMT Tx FIFO Full 0 0* IMT Tx FIFO Half Full 0 0* IXP Rx FIFO Full 0 0* IXP Rx FIFO Half Full 0 0*
Misc Speed Statistic BUS A Value BUS B Value -------------------- ----------- ----------- Shelf ID UART Framing Error 59 0* Shelf ID UART Overrun Error 0 0*;
Update to the rept-imt-lvl1 Command
The output for the rept-imt-lvl1 command is enhanced to display additional error reports andTAXI bus utilization. The command can be configured to provide reports for a range of shelves, toinclude high speed interface counts in the report, or to filter the report for a specific type of error orperformance count.rept-imt-lvl1:hs=yes:sloc=1104 imttest1 10-02-16 12:40:50 EDT EAGLE 42.0.0 Retrieving LVL1 data from Eagle cards...
-------------------------------------------------------------------------- Card: H'00f3 Elapsed Time (day - h:m:s): 0 - 00:02:59.3
A Bus B Bus Error Counts COM MUX COM MUX ------------ ------ ------ ------ ------ Rx CRC Error 0 0 0 0 Rx Format Error 0 0 0 0 Rx Inv Len 0 0 0 0 Rx FIFO Half Full 0 0 0 0 Rx FIFO Full 0 0 0 0 CPU Rx FIFO Half Full 0 -- 0 -- CPU Rx FIFO Full 0 -- 0 -- CPU Rx MSU FIFO Full 0 -- 0 -- CPU Rx LSSU FIFO Full 0 -- 0 -- CPU Rx XSU FIFO Full 0 -- 0 -- ASU Rx FIFO Half Full 0 -- 0 -- ASU Rx FIFO Full 0 -- 0 -- SSU Packet Rx 0 -- 0 -- ASU Safety Pkt 0 -- 0 -- TSU Safety Pkt 0 -- 0 -- BSU Safety Pkt 0 -- 0 -- SSU Safety Pkt 0 -- 0 -- Other Safety Pkt 0 -- 0 -- Pri Ctrl Rx Err 0 -- 0 -- Pri Ctrl Sanity Err 0 -- 0 -- IMT Receive FIFO Full 0 -- 0 -- Pri Ctrl No SOM 0 0 0 0
91910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Pri Ctrl Tx Err 0 -- 0 -- Tx FIFO Half Full 0 0 0 0 Tx FIFO Full 0 0 0 0 FC Tx FIFO Half Full 0 0 0 0 FC Tx FIFO Full 0 0 0 0 IMT Tx FIFO Half Full 0 0 0 0 IMT Tx FIFO Full 0 0 0 0 Tx FIFO 3/4 Full 0 -- 0 -- IMT By-pass FIFO Half Full 0 -- 0 -- IMT By-pass FIFO Full 0 -- 0 -- Pass thru CRC Error 0 -- 0 -- Lost Multicast Pkt 0 -- 0 -- Invalid Interrupt 0 -- 0 -- Error Int Overflow 0 -- 0 -- Large Pkt Error 0 0 0 0 MSU Retransmitted 0 -- 0 -- MSU Ret on error 0 -- 0 -- VC OS Count 0 -- 0 -- Bus OS Count 0 -- 0 -- Violation Error 0 -- 0 -- Info: MSU Dropped no Rept 0 0 0 0
A Bus B Bus Low Speed Perf Counts Rx Tx Rx Tx --------------------- --------- --------- --------- --------- All Packets 0K 0K 0K 0K All Bytes 0M 0M 0M 0M MSU Packets 0K 0K 0K 0K MSU Bytes 0K 0K 0K 0K ASU Packets 0K 0K 0K 0K ASU Bytes 0K 0K 0K 0K DSU Packets 0K 0K 0K 0K DSU Bytes 0K 0K 0K 0K HSU Packets 0K 0K 0K 0K HSU Bytes 0K 0K 0K 0K TSU Packets 0K 0K 0K 0K TSU Bytes 0K 0K 0K 0K LSSU Packets 0K 0K 0K 0K LSSU Bytes 0K 0K 0K 0K BSU Packets 0K 0K 0K 0K BSU Bytes 0K 0K 0K 0K SSU Packets 0K 0K 0K 0K SSU Bytes 0K 0K 0K 0K Othr Packets 0K 0K 0K 0K Othr Bytes 0K 0K 0K 0K TAXI Util 0 0 0 0
;
imttest1 10-02-16 12:40:56 EDT EAGLE 42.0.0 -------------------------------------------------------------------------- Shelf: h'00f0
A Bus B Bus High Speed Perf Counts Rx Tx Rx Tx ---------------------- --------- --------- --------- --------- All Packets 0K 0K 0K 0K All Bytes 0M 0M 0M 0M MSU Packets 0K 0K 0K 0K MSU Bytes 0K 0K 0K 0K ASU Packets 0K 0K 0K 0K ASU Bytes 0K 0K 0K 0K DSU Packets 0K 0K 0K 0K DSU Bytes 0K 0K 0K 0K HSU Packets 0K 0K 0K 0K HSU Bytes 0K 0K 0K 0K TSU Packets 0K 0K 0K 0K TSU Bytes 0K 0K 0K 0K LSSU Packets 0K 0K 0K 0K LSSU Bytes 0K 0K 0K 0K BSU Packets 0K 0K 0K 0K BSU Bytes 0K 0K 0K 0K SSU Packets 0K 0K 0K 0K
92910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
SSU Bytes 0K 0K 0K 0K Othr Packets 0K 0K 0K 0K Othr Bytes 0K 0K 0K 0K
High Speed Interface Counts A Bus B Bus --------------------------- --------- --------- FC Bus Utilization 0 0 Minor Congestion Event 0 0 Major Congestion Event 0 0 Minor Congestion Second 0 0 Major Congestion Second 0 0 100 MS Peak Bytes 0 0 100 MS Peak MSU Bytes 0 0 100 MS Peak ASU Bytes 0 0 100 MS Peak DSU Bytes 0 0 100 MS Peak HSU Bytes 0 0 100 MS Peak TSU Bytes 0 0 100 MS Peak LSSU Bytes 0 0 100 MS Peak BSU Bytes 0 0 100 MS Peak SSU Bytes 0 0 100 MS Peak Othr Bytes 0 0 HIPR2 Switching Util 0 0
========================================================================== SUMMARY REPORT: Totals accumulated from 1 User slots
A Bus B Bus Error Counts COM MUX COM MUX ------------ ------ ------ ------ ------ Rx CRC Error 0 0 0 0 Rx Format Error 0 0 0 0 Rx Inv Len 0 0 0 0 Rx FIFO Half Full 0 0 0 0 Rx FIFO Full 0 0 0 0 CPU Rx FIFO Half Full 0 0 0 0 CPU Rx FIFO Full 0 0 0 0 CPU Rx MSU FIFO Full 0 -- 0 -- CPU Rx LSSU FIFO Full 0 -- 0 -- CPU Rx XSU FIFO Full 0 -- 0 -- ASU Rx FIFO Half Full 0 -- 0 -- ASU Rx FIFO Full 0 -- 0 -- SSU Packet Rx 0 -- 0 -- ASU Safety Pkt 0 -- 0 -- TSU Safety Pkt 0 -- 0 -- BSU Safety Pkt 0 -- 0 -- SSU Safety Pkt 0 -- 0 -- Other Safety Pkt 0 -- 0 -- Pri Ctrl Rx Err 0 -- 0 -- Pri Ctrl Sanity Err 0 -- 0 -- IMT Receive FIFO Full 0 -- 0 -- Pri Ctrl No SOM 0 0 0 0 Pri Ctrl Tx Err 0 -- 0 -- Tx FIFO Half Full 0 -- 0 -- Tx FIFO Full 0 -- 0 -- FC Tx FIFO Half Full 0 0 0 0 FC Tx FIFO Full 0 0 0 0 IMT Tx FIFO Half Full 0 0 0 0 IMT Tx FIFO Full 0 0 0 0 Tx FIFO 3/4 Full 0 -- 0 -- IMT By-pass FIFO Half Full 0 -- 0 -- IMT By-pass FIFO Full 0 -- 0 -- Pass thru CRC Error 0 -- 0 -- Lost Multicast Pkt 0 -- 0 -- Invalid Interrupt 0 -- 0 -- Error Int Overflow 0 -- 0 -- Large Pkt Error 0 0 0 0 MSU Retransmitted 0 -- 0 -- MSU Ret on error 0 -- 0 -- VC OS Count 0 -- 0 -- Bus OS Count 0 -- 0 -- Violation Error 1 -- 1 -- Info: MSU Dropped no Rept 0 0 0 0
93910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
A Bus B Bus Low Speed Perf Counts Rx Tx Rx Tx --------------------- --------- --------- --------- --------- All Packets 0M 0M 0M 0M All Bytes 0M 0M 0M 0M MSU Packets 0K 0K 0K 0K MSU Bytes 0K 0K 0K 0K ASU Packets 0K 0K 0K 0K ASU Bytes 0K 0K 0K 0K DSU Packets 0K 0K 0K 0K DSU Bytes 0K 0K 0K 0K HSU Packets 0K 0K 0K 0K HSU Bytes 0K 0K 0K 0K TSU Packets 0K 0K 0K 0K TSU Bytes 0K 0K 0K 0K LSSU Packets 0K 0K 0K 0K LSSU Bytes 0K 0K 0K 0K BSU Packets 0K 0K 0K 0K BSU Bytes 0K 0K 0K 0K SSU Packets 0K 0K 0K 0K SSU Bytes 0K 0K 0K 0K Othr Packets 0K 0K 0K 0K Othr Bytes 0K 0K 0K 0K
A Bus B Bus High Speed Perf Counts Rx Tx Rx Tx ---------------------- --------- --------- --------- --------- All Packets 0M 0M 0M 0M All Bytes 0M 0M 0M 0M MSU Packets 0K 0K 0K 0K MSU Bytes 0K 0K 0K 0K ASU Packets 0K 0K 0K 0K ASU Bytes 0K 0K 0K 0K DSU Packets 0K 0K 0K 0K DSU Bytes 0K 0K 0K 0K HSU Packets 0K 0K 0K 0K HSU Bytes 0K 0K 0K 0K TSU Packets 0K 0K 0K 0K TSU Bytes 0K 0K 0K 0K LSSU Packets 0K 0K 0K 0K LSSU Bytes 0K 0K 0K 0K BSU Packets 0K 0K 0K 0K BSU Bytes 0K 0K 0K 0K SSU Packets 0K 0K 0K 0K SSU Bytes 0K 0K 0K 0K Othr Packets 0K 0K 0K 0K Othr Bytes 0K 0K 0K 0K
SUMMARY REPORT HS Totals accummlated from 1 HIPR2 Slots 0 HIPR Slots 1 HMUX Slots
High Speed Interface Summary A Bus B Bus ---------------------------- --------- --------- HIPR2 Switching Util 0 0 FC Bus Utilization 0 0 Minor Congestion Event 0 0 Major Congestion Event 0 0 Minor Congestion Second 0 0 Major Congestion Second 0 0 100 MS Peak Bytes 0 0 100 MS Peak MSU Bytes 0 0 100 MS Peak ASU Bytes 0 0 100 MS Peak DSU Bytes 0 0 100 MS Peak HSU Bytes 0 0 100 MS Peak TSU Bytes 0 0 100 MS Peak LSSU Bytes 0 0 100 MS Peak BSU Bytes 0 0 100 MS Peak SSU Bytes 0 0 100 MS Peak Othr Bytes 0 0 HIPR2 Switching Util 0 0
94910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
High Speed Error Summary A Bus B Bus ------------------------ --------- --------- HS Rx Packet CRC Error 0 0 HS Rx Packet Format Error 0 0 HS Rx Disparity Error 0 0 HS Rx Sync Lost Error 0 0 HS Rx Code Word Error 0 0 HS Rx Packet SOM Before EOM 0 0 HS Bypass FIFO Half Full 0 0 HS Bypass FIFO Full 0 0 HS Rx FIFO Half Full 0 0 HS Rx FIFO Full 0 0 HS Tx FIFO Half Full 0 0 HS Tx FIFO Full 0 0 IXP Rx FIFO Half Full 0 0 IXP Rx FIFO Full 0 0
HMUX Low Speed Ring Summary A Bus B Bus --------------------------- --------- --------- IMT Rx Packet CRC Error 0 0 IMT Rx Packet Format Error 0 0 IMT Rx Violation Error 0 0 IMT Bypass FIFO Half Full 0 0 IMT Bypass FIFO Full 0 0 IMT Rx FIFO Half Full 0 0 IMT Rx FIFO Full 0 0 CPU Rx FIFO Half Full 0 0 CPU Rx FIFO Full 0 0 CPU Rx FIFO Empty Before SOM 0 0 CPU Rx FIFO Empty Before EOM 0 0 CPU Rx Packet SOM Before EOM 0 0 CPU Rx Packet CRC Error 0 0 DMA terminal count 0 0 CPU Tx Buffer EOB 0 0 CPU Tx Buffer Full 0 0
--------------------------------------------------------------------------; END OF REPORT;
Update to the rept-stat-assoc Command
The rept-stat-assoc command is updated to display 'B'' ports when appropriate.rept-stat-assoc:port=a15 tekelecstp 10-01-05 10:47:26 EST EAGLE 42.0.0 CARD IPLNK ANAME LOC PORT LINK PST SST ASPID ipsgm3ua 1101 A A15 IS-NR ESTABLISHED undefined ipsgm2pa 1102 B A15 IS-NR ESTABLISHED
Command Completed.
Update to the rept-stat-card Command
The rept-stat-card command is updated to allow the card type to determine the number of linksthat are displayed in the command output. The output will display up to the maximum links for thecard type.
Example 1 shows output for an E5-E1T1 card when the card is not seated and 16 links are provisioned.
95910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
rept-stat-card:loc=1103:links=all tekelecstp 10-03-01 14:16:21 EST EAGLE 42.0.0 CARD VERSION TYPE GPL PST SST AST 1103 ----------- LIME1 SS7ANSI OOS-MT Isolated ----- ALARM STATUS = ** 0013 Card is isolated from the system ???? GPL version = ----------- IMT BUS A = ----- IMT BUS B = ----- SIGNALING LINK STATUS SLK PST LS CLLI A OOS-MT-DSBLD ls3 ----------- B OOS-MT-DSBLD ls3 ----------- A1 OOS-MT-DSBLD ls3 ----------- B1 OOS-MT-DSBLD ls3 ----------- A2 OOS-MT-DSBLD ls3 ----------- B2 OOS-MT-DSBLD ls3 ----------- A3 OOS-MT-DSBLD ls3 ----------- B3 OOS-MT-DSBLD ls3 ----------- A4 OOS-MT-DSBLD ls3 ----------- B4 OOS-MT-DSBLD ls3 ----------- A5 OOS-MT-DSBLD ls3 ----------- B5 OOS-MT-DSBLD ls3 ----------- A6 OOS-MT-DSBLD ls3 ----------- B6 OOS-MT-DSBLD ls3 ----------- A7 OOS-MT-DSBLD ls3 ----------- B7 OOS-MT-DSBLD ls3 ----------- A8 OOS-MA -------- ----------- B8 OOS-MA -------- ----------- A9 OOS-MA -------- ----------- B9 OOS-MA -------- ----------- A10 OOS-MA -------- ----------- B10 OOS-MA -------- ----------- A11 OOS-MA -------- ----------- B11 OOS-MA -------- ----------- A12 OOS-MA -------- ----------- B12 OOS-MA -------- ----------- A13 OOS-MA -------- ----------- B13 OOS-MA -------- ----------- A14 OOS-MA -------- ----------- B14 OOS-MA -------- ----------- A15 OOS-MA -------- ----------- B15 OOS-MA -------- ----------- A16 OOS-MA -------- ----------- B16 OOS-MA -------- ----------- A17 OOS-MA -------- ----------- B17 OOS-MA -------- ----------- A18 OOS-MA -------- ----------- B18 OOS-MA -------- ----------- A19 OOS-MA -------- ----------- B19 OOS-MA -------- ----------- A20 OOS-MA -------- ----------- B20 OOS-MA -------- ----------- A21 OOS-MA -------- ----------- B21 OOS-MA -------- ----------- A22 OOS-MA -------- ----------- B22 OOS-MA -------- ----------- A23 OOS-MA -------- ----------- B23 OOS-MA -------- ----------- A24 OOS-MA -------- ----------- B24 OOS-MA -------- ----------- A25 OOS-MA -------- ----------- B25 OOS-MA -------- ----------- A26 OOS-MA -------- ----------- B26 OOS-MA -------- ----------- A27 OOS-MA -------- ----------- B27 OOS-MA -------- ----------- A28 OOS-MA -------- ----------- B28 OOS-MA -------- ----------- A29 OOS-MA -------- ----------- B29 OOS-MA -------- ----------- A30 OOS-MA -------- ----------- B30 OOS-MA -------- -----------
96910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
A31 OOS-MA -------- ----------- B31 OOS-MA -------- -----------
Command Completed. ;
Example 2 shows output for an E5-E1T1 card when the card is seated and 16 links are provisioned.rept-stat-card:loc=1103:links=all tekelecstp 10-03-01 14:16:21 EST EAGLE 42.0.0 CARD VERSION TYPE GPL PST SST AST 1103 133-008-000 LIME1 SS7HC IS-NR Active ----- ALARM STATUS = * 0021 Clock A for card failed, Clock B normal IMTPCI GPL version = 133-008-000 BLVXW6 GPL version = 133-008-000 BLDIAG6 GPL version = 133-002-000 BLBEPM GPL version = 132-048-000 PLDPMC1 GPL version = 132-019-000 BLCPLD GPL version = 132-020-000 IMT BUS A = Conn IMT BUS B = Conn CURRENT TEMPERATURE = 34C ( 94F) PEAK TEMPERATURE: = 34C ( 94F) [10-03-01 14:18] SIGNALING LINK STATUS SLK PST LS CLLI A OOS-MT-DSBLD ls3 ----------- B OOS-MT-DSBLD ls3 ----------- A1 OOS-MT-DSBLD ls3 ----------- B1 OOS-MT-DSBLD ls3 ----------- A2 OOS-MT-DSBLD ls3 ----------- B2 OOS-MT-DSBLD ls3 ----------- A3 OOS-MT-DSBLD ls3 ----------- B3 OOS-MT-DSBLD ls3 ----------- A4 OOS-MT-DSBLD ls3 ----------- B4 OOS-MT-DSBLD ls3 ----------- A5 OOS-MT-DSBLD ls3 ----------- B5 OOS-MT-DSBLD ls3 ----------- A6 OOS-MT-DSBLD ls3 ----------- B6 OOS-MT-DSBLD ls3 ----------- A7 OOS-MT-DSBLD ls3 ----------- B7 OOS-MT-DSBLD ls3 ----------- A8 OOS-MA -------- ----------- B8 OOS-MA -------- ----------- A9 OOS-MA -------- ----------- B9 OOS-MA -------- ----------- A10 OOS-MA -------- ----------- B10 OOS-MA -------- ----------- A11 OOS-MA -------- ----------- B11 OOS-MA -------- ----------- A12 OOS-MA -------- ----------- B12 OOS-MA -------- ----------- A13 OOS-MA -------- ----------- B13 OOS-MA -------- ----------- A14 OOS-MA -------- ----------- B14 OOS-MA -------- ----------- A15 OOS-MA -------- ----------- B15 OOS-MA -------- -----------
Command Completed.;
Example 3 shows output for the unequipped links on an E5-E1T1 card when the card is seated.rept-stat-card:loc=1103:links=unequip tekelecstp 10-03-01 14:16:21 EST EAGLE 42.0.0 CARD VERSION TYPE GPL PST SST AST 1103 133-008-000 LIME1 SS7HC IS-NR Active ----- ALARM STATUS = * 0021 Clock A for card failed, Clock B normal IMTPCI GPL version = 133-008-000 BLVXW6 GPL version = 133-008-000 BLDIAG6 GPL version = 133-002-000 BLBEPM GPL version = 132-048-000
97910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
PLDPMC1 GPL version = 132-019-000 BLCPLD GPL version = 132-020-000 IMT BUS A = Conn IMT BUS B = Conn CURRENT TEMPERATURE = 35C ( 95F) PEAK TEMPERATURE: = 35C ( 95F) [10-03-01 14:19] SIGNALING LINK STATUS SLK PST LS CLLI A8 OOS-MA -------- ----------- B8 OOS-MA -------- ----------- A9 OOS-MA -------- ----------- B9 OOS-MA -------- ----------- A10 OOS-MA -------- ----------- B10 OOS-MA -------- ----------- A11 OOS-MA -------- ----------- B11 OOS-MA -------- ----------- A12 OOS-MA -------- ----------- B12 OOS-MA -------- ----------- A13 OOS-MA -------- ----------- B13 OOS-MA -------- ----------- A14 OOS-MA -------- ----------- B14 OOS-MA -------- ----------- A15 OOS-MA -------- ----------- B15 OOS-MA -------- -----------
Command Completed.;
Update to the rept-stat-mux Command
The rept-stat-mux command output is updated to display the most recent Bit Error Rate Test(BERT) status.rept-stat-mux tekelecstp 10-02-21 11:19:03 EST EAGLE 42.0.0 CARD TYPE PST SST AST BITRATE BITRATE BERT (OPER) (ACT) STATUS --------------------------------------------------------------------------- 1109 HIPR2 IS-NR Active ----- HIGH LOW PASS 1110 HIPR2 IS-NR Active ----- HIGH LOW UNKNOWN 1209 HIPR2 IS-NR Active ----- HIGH LOW FAIL 1210 HIPR IS-NR Active ----- LOW LOW UNKNOWN 1309 HIPR2 IS-NR Active ----- HIGH LOW PASS 1310 HMUX IS-NR Active ----- LOW LOW UNKNOWN Command Completed. ;
Update to the rept-stat-sys Command
The output for the rept-stat-sys command is updated to show the status of the Fast Copysubsystem. An example of the output is shown in the Commands section for the ANSI41 AIQ feature.
Update to the rtrv-ls Command
The output for the rtrv-ls command is updated to abbreviate the transmission rate for the link inbits per second (BPS) when the rate is greater than 1 million BPS.rtrv-ls:lsn=ls1 tekelecstp 09-12-09 00:36:40 EST EAGLE 42.0.0
L3T SLT GWS GWS GWS LSN APCA (SS7) SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS ls1 003-003-003 gws1 1 1 no A 15 on on on yes off
SPCA CLLI TFATCABMLQ MTPRSE ASL8
98910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
---------------- ----------- 7 --- no
RANDSLS off
IPSG IPGWAPC GTTMODE CGGTMOD no no CdPA no
L2T PCR PCR LOC LINK SLC TYPE SET BPS ECM N1 N2 1101 A 0 LIMDS0 1 56000 BASIC ---- ------
LP ATM LOC LINK SLC TYPE SET BPS TSEL VCI VPI LL 1102 A 2 LIMATM 1 1.544M EXTERNAL 5 0 0
LOC LINK SLC TYPE IPLIML2 1201 A 5 IPLIM M2PA
L2T PCR PCR E1 E1 LOC LINK SLC TYPE SET BPS ECM N1 N2 LOC PORT TS 1205 A 6 LIME1 1 56000 BASIC --- ----- 1205 1 1
L2T PCR PCR T1 T1 LOC LINK SLC TYPE SET BPS ECM N1 N2 LOC PORT TS 1206 A 10 LIMT1 1 56000 BASIC --- ----- 1206 1 1
Link set table is (7 of 1024) 1% full.
;
Update to the rtrv-slk Command
The output for the rtrv-slk command is updated to abbreviate the transmission rate for the link inbits per second (BPS) when the rate is greater than 1 million BPS.rtrv-slk tekelecstp 09-12-17 13:54:32 EST EAGLE 42.0.0 rtrv-slk Command entered at terminal #4. L2T PCR PCR LOC LINK LSN SLC TYPE SET BPS ECM N1 N2 1201 A e3m1s1 0 LIMDS0 1 56000 BASIC ---- ------ 1201 B e3m1s2 0 LIMDS0 1 56000 BASIC ---- ------ 1202 A e3m1s1 1 LIMDS0 1 56000 BASIC ---- ------ 1202 B e3m1s2 1 LIMDS0 1 56000 BASIC ---- ------ 1203 A e3m1s1 2 LIMDS0 1 56000 BASIC ---- ------ 1203 B e3m1s2 2 LIMDS0 1 56000 BASIC ---- ------ 1204 A e3m1s1 3 LIMDS0 1 56000 BASIC ---- ------ 1204 B e3m1s2 3 LIMDS0 1 56000 BASIC ---- ------ 1205 A e3m1s1 4 LIMDS0 1 56000 BASIC ---- ------ 1205 B e3m1s2 4 LIMDS0 1 56000 BASIC ---- ------ 1206 A e3m1s1 5 LIMDS0 1 56000 BASIC ---- ------ 1206 B e3m1s2 5 LIMDS0 1 56000 BASIC ---- ------ 1207 A e3m1s1 6 LIMDS0 1 56000 BASIC ---- ------ 1207 B e3m1s2 6 LIMDS0 1 56000 BASIC ---- ------ 1211 A e3m2s1 0 LIMDS0 11 56000 BASIC ---- ------ 1211 B e3m2s2 0 LIMDS0 11 56000 BASIC ---- ------ 1212 A e3m2s1 1 LIMDS0 11 56000 BASIC ---- ------ 1212 B e3m2s2 1 LIMDS0 11 56000 BASIC ---- ------ 1213 A e3m2s1 2 LIMDS0 11 56000 BASIC ---- ------ 1213 B e3m2s2 2 LIMDS0 11 56000 BASIC ---- ------ 1214 A e3m2s1 3 LIMDS0 11 56000 BASIC ---- ------ 1214 B e3m2s2 3 LIMDS0 11 56000 BASIC ---- ------ 1215 A e3m2s1 4 LIMDS0 11 56000 BASIC ---- ------ 1215 B e3m2s2 4 LIMDS0 11 56000 BASIC ---- ------ 1216 A e3m2s1 5 LIMDS0 11 56000 BASIC ---- ------ 1216 B e3m2s2 5 LIMDS0 11 56000 BASIC ---- ------
99910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
1217 A e3m2s1 6 LIMDS0 11 56000 BASIC ---- ------ 1217 B e3m2s2 6 LIMDS0 11 56000 BASIC ---- ------
LP ATM LOC LINK LSN SLC TYPE SET BPS TSEL VCI VPI LL 1208 A e3e4 4 LIMATM 1 1.544M LINE 5 0 0 1218 A e3e4 5 LIMATM 1 1.544M LINE 5 0 0
LOC LINK LSN SLC TYPE ANAME SLKTPS 1303 A m2pa12132 0 IPSG m2pa1303a 1000 1303 B m3ua333a 0 IPSG m3ua1303b 500 1303 A1 m3ua323a 0 IPSG m3ua1303a 1000 1303 B1 m3ua333i 0 IPSG m3ua1303b 500 1303 B2 m3ua333n 0 IPSG m3ua1303b 500 1305 A ls1305a 0 IPSG sg1305a 1000 1305 B ls1305i 0 IPSG sg1305i 500 1305 A1 ls1305a 1 IPSG a1 1000 1305 B1 ls1305i 1 IPSG a1 500 1305 B14 lsitunbb 0 IPSG a1 1000 1305 B15 lsitunaa 0 IPSG a1 1000
LOC LINK LSN SLC TYPE IPLIML2 1301 A e3e4 0 IPLIM M2PA 1301 B e3e4 2 IPLIM M2PA 1311 A e3e4a 0 IPLIM M2PA 1313 A e3e4i 0 IPLIMI M2PA
LOC LINK LSN SLC TYPE 1307 A ls1307a 0 SS7IPGW 1315 A ls1315a 0 SS7IPGW 1317 A ls1317i 0 IPGWI
SLK table is (48 of 1200) 4% full.
;
Operational Changes
Release 43.0 contains new and updated alarms and error messages for feature and non-feature items.
Unsolicited Alarm Messages
GTT Action - DUPLICATE
Table 3: UAMS: GTT Action - DUPLICATE
Output GroupFormat262UAM
Added for 42.0Action
Old data
GTTSCCP SYSTEMGTT Duplicate Actnprocessing stopped
New data
Output GroupFormat263UAM
Added for 42.0Action
Old data
100910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
GTTSCCP SYSTEMGTT Duplicate Actnprocessing resumed
New data
ANSI41 AIQ
Table 4: UAMs: ANSI41 AIQ
Output GroupFormat592UAM
Added for 42.0Action
Old data
SYS_MAINTLSSSubsystem is notavailable
New data
Output GroupFormat593UAM
Added for 42.0Action
Old data
SYS_MAINTLSSSubsystem is disabledNew data
Output GroupFormat594UAM
Added for 42.0Action
Old data
SYS_MAINTLSSSubsystem normal,card(s) abnormal
New data
Output GroupFormat595UAM
Added for 42.0Action
Old data
SYS_MAINTLSSSubsystem is availableNew data
Output GroupFormat596UAM
Added for 42.0Action
Old data
SYS_MAINTLSSSubsystem is removedNew data
E5-OAM Integrated Measurements
Table 5: UAMs: E5-OAM Integrated Measurements
Output GroupFormat0012UAM
Added for 42.0Action
Old data
101910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
CARDMEAS SYSTEMInvalid HW forIntegratedMeasurements
New data
HIPR2
Table 6: UAMs: HIPR2
Output GroupFormat27UAM
Added for 42.0Action
Old data
SYS_MAINTIMT SystemIMT Bus util rateexceeds minor thresh
New data
Output GroupFormat28UAM
Added for 42.0Action
Old data
SYS_MAINTIMT SystemIMT Bus util rateexceeds major thresh
New data
Output GroupFormat29UAM
Added for 42.0Action
Old data
SYS_MAINTIMT SystemIMT Bus utilizationthreshold cleared
New data
Output GroupFormat30UAM
Added for 42.0Action
Old data
CARDCARDHIPR2 detected a minorCongested Second
New data
31UAM
Added for 42.0Action
Old data
HIPR2 detected a majorCongested Second
New data
32UAM
Added for 42.0Action
Old data
102910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
CARDCARDHIPR2 Congestioncleared
New data
Output GroupFormat49UAM
Added for 42.0Action
Old data
IMT BusIMT BusBit Rate change ACKfailure
New data
Output GroupFormat50UAM
Added for Release 42.0Action
Old data
IMT BusIMT BusBit Rate change ACKrecv'd
New data
Output GroupFormat561UAM
Added for 42.0Action
Old data
SYS_MAINTSYSTEMCan't establish Hi Bitrate;All HW OK
New data
Output GroupFormat562UAM
Added for 42.0Action
Old data
SYS_MAINTSYSTEMHigh Bit rateestablished
New data
Output GroupFormat563UAM
Added for 42.0Action
Old data
SYS_MAINTIMT SYSTEMIMT Bit rate mismatchdetected
New data
Output GroupFormat564UAM
Added for 42.0Action
Old data
SYS_MAINTIMT SYSTEMIMT Bit rate mismatchcleared
New data
Output GroupFormat570UAM
Revised for 42.0Action
103910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Incompatible flashimage for sys release
Old data
CARDCARDIncompatible flashimage for sys rel
New data
Output GroupFormat573UAM
Added for 42.0Action
Old data
CARDCARDBERT Test FailedNew data
Output GroupFormat574UAM
Added for 42.0Action
Old data
CARDCARDBERT test failurecleared
New data
Output GroupFormat575UAM
Added for 42.0Action
Old data
CARDCARDCard type not HIPR2New data
Deleted UAMs
UAMs 547 and 548 were deleted for 42.0.
Unsolicited Information Messages
ANSI41 AIQ
Table 7: UIMs: ANSI41 AIQ
Output GroupFormat1433UIM
Enhanced for 42.0Action
<Subsystem :> Inhrequest alrdy pending
Old data
APSSI21<AIQ :> Inh requestalrdy pending
New data
Output GroupFormat1434UIM
Enhanced for 42.0Action
<Subsystem :> FailureInhibiting SS
Old data
104910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
APSSI21<AIQ:> FailureInhibiting SS
New data
Output GroupFormat1435UIM
Added for 42.0Action
Old data
APSSI13AIQ: TriggerType notprovisioned
New data
Output GroupFormat1436UIM
Added for 42.0Action
Old data
APSSI13AIQ: UnsupportedDigits (Dialed) length.
New data
E5-OAM IP/Ethernet Support
Table 8: UIM: E5-OAM IP/Ethernet Support
Output GroupFormat1441UIM
Added for 42.0Action
Old data
CARDI20IP Info mismatch, cardreset required
New data
E5-OAM Integrated Measurements
Table 9: UIMs: E5-OAM Integrated Measurements
Output GroupFormat1170UIM
Added for 42.0Action
Old data
SYS_MAINTI1OAMHC Meastransition complete.
New data
Output GroupFormat1171UIM
Added for 42.0Action
Old data
SYS_MAINTI1Schd UI Rpt disbld-linkcnt exceeds 700
New data
105910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
FLOBR Enhancements
Table 10: UIMs: FLOBR Enhancements
Output GroupFormat1413UIM
Revised for 42.0Action
GTT(FLOBR) failure:duplicate set type
Old data
GTTI43GTT(FLOBR) failure:duplicate set name
New data
1415UIM
Revised for 42.0Action
GTT(FLOBR) warning:duplicate set type
Old data
GTTI43GTT(FLOBR) warning:duplicate set name
New data
G-Flex MAP Layer Routing support for ATI using MSISDN
Table 11: UIM: G-Flex MAP Layer Routing support for ATI using MSISDN
Output GroupFormat1440UIM
Added for 42.0Action
Old data
APSSI1G-Flex MLR: Op withbad MSISDN skipped
New data
GTT Actions
Table 12: UIMS: GTT Actions
Output GroupFormat1077UIM
Added for 42.0Action
Old data
GTTI48GTT Action TCAPERROR DISCARDEDMSU
New data
Output GroupFormat1078UIM
Added for 42.0Action
Old data
106910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
GTTI48GTT ActionDUPLICATE FAILED
New data
Output GroupFormat1079UIM
Added for 42.0Action
Old data
GTTI48GTT Action FORWARDFAILED
New data
Output GroupFormat1192UIM
Updated for 42.0Action
GTTI43SCCP translation found:XLAT=UDTS
Old data
GTTI48GTT Action UDTSDISCARDED MSU
New data
Output GroupFormat1193UIM
Action
GTTI43SCCP translation found:XLAT=DISCARD
Old data
GTTI48GTT Action DISCARDDISCARDED MSU
New data
Output GroupFormat1443UIM
Added for 42.0Action
Old data
GTTI48GTT Action FAILED TOSEND TCAP ERROR
New data
Output GroupFormat1444UIM
Added for 42.0Action
Old data
GTTI44GTT Loadsharing fail:PC not in MRNSET
New data
HIPR2
Table 13: UIMs: HIPR2
Output GroupFormat1156UIM
Added for 42Action
Old data
107910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
SYSTEMMAINTENANCE
I1Minor congestion eventdetected
New data
Output GroupFormat1157UIM
Added for 42Action
Old data
SYSTEMMAINTENANCE
I1Major congestion eventdetected
New data
Output GroupFormat1158UIM
Added for 42Action
Old data
CARDI1Minor HIPR2 switchingcapacity reached
New data
Output GroupFormat1159UIM
Added for 42Action
Old data
CARDI1Major HIPR2 switchingcapacity reached
New data
Output GroupFormat1424UIM
Added for 42Action
Old data
SYSTEMMAINTENANCE
I21IMT A [B] requested tore-align at LOW [HIGH]Rate
New data
Output GroupFormat1437UIM
Added for 42Action
Old data
SYSTEMMAINTENANCE
I21IMT [A|B]: Rate changenot initiated
New data
HIPR2: Add Extended BERT parameter to TST-IMT Command
Table 14: UIM: HIPR2: Add Extended BERT parameter to TST-IMT Command
Output GroupFormat1356UIM
Added for 42Action
Old data
108910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
SYS_MAINTI1EXT BERT terminatedwith OAM switchover
New data
Integrated Measurements
Table 15: UIM: Integrated Measurements
Output GroupFormat1445UIM
Added for 42Action
Old data
MEASI1LNP Day Meas.Discarded for LRN
New data
Support Fast Copy on IPGHC GPL
Table 16: UIM: Support Fast Copy on IPGHC GPL
Output GroupFormat1442UIM
Added for 42.0Action
Old data
LINKI82Invalid EMP SCRMessage Received
New data
UAM Format Updates
LSS 1 2 3 4 5 6 7 812345678901234567890123456789012345678901234567890123456789012345678901234567890 xxxx.yyyy zz LSS [SSNAME] text
UIM Format Updates
I21
UIM Format I21 is added to support the ANSI 41 AIQ feature. 1 2 3 4 5 6 7 812345678901234567890123456789012345678901234567890123456789012345678901234567890 xxxx.yyyy zz LSS [SSNAME] text
I48
An alternate format for I48 is added to support GTT Actions. 1 2 3 4 5 6 7 812345678901234567890123456789012345678901234567890123456789012345678901234567890 xxxx.xxxx CARD cccc INFO ‘text’ OPC=&&-###-###-### CDPA: NI=# RI=@ GTI=## SSNI=@ PCI=@
109910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
TT=### NP=## NAI=### ADDR=##################### PC=&&-###-###-### SSN=### CGPA: NI=# RI=@ GTI=## SSNI=@ PCI=@ TT=### NP=## NAI=### ADDR=##################### PC=&&-###-###-### SSN=### Op-Code=--- Action Set=text Cause=text
I82
UIM Format I82 is added to support the Support FastCopy on IPGW feature. 1 2 3 4 5 6 7 812345678901234567890123456789012345678901234567890123456789012345678901234567890 xxxx.1442 CARD cccc,ppp INFO ‘text’ MSG Length=########## REQ EMP Version=##### RSP EMP Version=##### (Optional Field) REQ Transaction ID=### RSP Transaction ID=### (Optional Field) IMF IP Address=###.###.###.### Reason=[invalidation reason string]
Hardware Verification Codes
Table 17: Hardware Verification Codes: HIPR2
Associated UAMDescriptionCardHardware VerificationCode
570New card inserted intosystem with a flash
Any98
image not compatiblewith system release
99Inserted H/W is notcompatible with theprovisioned slot.
Any99
Error Messages
Error Messages: ANSI41 AIQ
Table 18: Error Messages: ANSI41 AIQ
Used by CommandNew?Error MessageResponse ID Code
ent-traceNGFLEX/INP/AINPQ/GPORT/PPSMS/VFLEX
E3342
OFF or ATINP/AIQ notenbld
alw/inh-map-ssNSSN value must be LNP,INP, EIR, VFLEX,ATINPQ or AIQ SSN
E3581
110910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by CommandNew?Error MessageResponse ID Code
alw/inh-map-ssNLNP/INP/EIR/VFLEX
must be ON orATINP/AIQ must beenabled
E3929
ent/chg-mapNINP/AINPQ/EIR/VFLEXmust be ON or
E4183
ATINP/AIQ must beenabled
rtrv-ss-applNLNP/AINPQ/EIR/VFLEX/ATINP/AIQ
E4188
must be enabled or INPmust be ON
chg-mapNSSN forITU-I/ITU-N/ANSI
E4189
True Point Codes mustbe the same
ent/chg-mapNLNP/VFLEX must beON or ATINP/AIQmust be enabled
E4716
ent/chg-mapNEIR/VFLEX must beON or ATINP/AIQmust be enabled
E4717
ent/chg/rtrv-srvselNGTIN24 must not bespecified when(N)SERV = ATINP/AIQ
E4838
chg-sidNCPCx must not beITUN24 if CPCTYPE isATINPQ/AIQ
E4895
chg-aiqoptsYANSI41 AIQ feature
must be enabledE5158
chg-mtc-measopts
chg/rtrv-sid
ent/chg/dlt-ss-appl
ent/chg/rtrv-srvsel
rept-ftp-meas
ent-ss-applYSTP True PC and AIQSubsystem does notexist in MAP Table
E5161
chg/rtrv-aiqoptsYUnable to read AIQOptions Table
E5181
111910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by CommandNew?Error MessageResponse ID Code
alw-map-ssYAIQ Subsystem isoffline in the database
E5182
chg-aiqoptsYDIGMINLEN must beless than or equal toDIGMAXLEN
E5202
chg-aiqoptsYPFX and TRIGTYPEmust be specifiedtogether
E5203
chg-aiqoptsYMax allowed AIQTrigger Type - Prefixentries Provisioned
E5204
chg-aiqoptsYCannot delete an AIQTrigger Type that is notProvisioned
E5205
Command to perform migration of IPLIM to IPSG
Table 19: Error Messages: Command to perform migration of IPLIM to IPSG
Used by CommandNew?Error MessageResponse ID Code
chg-cardNMissing mandatoryparameter - <parm>
E2011
chg-cardN<parm_desc> is out ofrange - <parm>
E2016
chg-cardNCard location isunequipped
E2101
chg-cardNFailed reading the IMTtable
E2102
chg-cardNFailed reading the Linktable
E2103
chg-cardNFailed reading the shelftable
E2104
chg-cardNInvalid card TYPE andAPPL load typecombination
E2105
chg-cardNShelf location notequipped
E2108
chg-cardNFailed reading linksettable
E2122
112910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by CommandNew?Error MessageResponse ID Code
chg-cardNCard slot reserved bysystem
E2154
chg-cardNCommand aborted bysystem error
E2601
chg-cardNAPPL not valid bycommand
E3710
chg-cardNActive device state doesnot permit databasechange
E3726
chg-cardNTotal provisionedsystem IP TPS limitexceeded
E4255
chg-cardNTPS exceeded for cardE4807
chg-cardNNo association exists fora link on the card
E5314
chg-cardYAll associations mustuse M2PA adapter type
E5315
chg-cardYLoc contains invalidhardware
E5372
E5-OAM Ethernet Support
Table 20: Error Message: E5-OAM Ethernet Support
Used by CommandNew?Error MessageResponse ID Code
chg/rtrv-ip-lnkNSpecified Port is not
supportedE2975
rept-stat-enet
E5-OAM Integrated Measurements
Table 21: Error Messages: E5-OAM Integrated Measurements
Used by CommandNew?Error MessageReponse ID Code
chg-measoptsYInvalid parametercombination specified
E2155
chg-ctrl-featNPlatformenable or
Oamhcmeas optionmust be on
E3088
chg-measopts
rept-ftp-meas
113910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by CommandNew?Error MessageReponse ID Code
enable-ctrl-featNCommand invalid forhardware configuration
E4916
chg-measYLink count exceeds maxallowed for scheduledUI reports
E5274
chg-measoptsYTransition in progress,Retry later
E5277
chg-measoptsYIntegratedMeasurements featuremust be ON
E5278
chg-measoptsYMEASPLAT or
IntegratedE5279
chg-mtc-measoptsMeasurements featuremust be ON
rept-ftp-meas
rept-stat-meas
rept-measYFTA is not available-userept-ftp-meas.
E5281
EAGLE OA&M Password Security Enhancements
Table 22: Error Messages: OA&M Password Security Enhancements
Used by CommandNew?Error MessageResponse ID Code
chg-pidNPassword does not
contain enoughcharacters
E2263
login
chg-pidNPassword verificationfailed
E2264
chg-pidNPassword operationsnot allowed on anon-secure terminal
E2723
chg-pidNPassword does not
contain enoughalphabetic characters
E2753
login
chg-pidNPassword does not
contain enough numericcharacters
E2754
login
chg-pidNPassword does not
contain enoughpunctuation characters
E2755
login
114910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by CommandNew?Error MessageResponse ID Code
loginNInvaliduserID/passwordcombination
E2757
chg-pidNPassword cannot
contain userIDE2761
login
chg-pidYPassword cannot be
changed at this timeE5190
login
chg-pidYPassword has too many
character matches withold password
E5191
login
chg-pidPassword matches aprevious password
E5192
login
chg-pidNew password matchesold password
E5246
login
EAGLE USB Enhancements
Table 23: Error Message: EAGLE USB Enhancements
Used by CommandNew?Error MessageResponse ID Code
act-upgradeNInvalid filennameentered
E2314
EOAP Hardware Maintenance Phase
Table 24: Error Message: EOAP Hardware Maintenance Phase
Used by CommandNew?Error MessageResponse ID Code
act-upgradeNOAP terminalconfigured in thesystem
E3861
115910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Extending IPSG Ethernet alarms to all Eagle applications that run on cards upport Ethernet interface
Table 25: Error Message: Extending IPSG Ethernet alarms to all Eagle applications that run on cardsupport Ethernet interface
Used by CommandNew?Error MessageResponse ID Code
unhb-almNParameters not valid forcard type
E2131
FLOBR Enhancements
Table 26: Error Messages: FLOBR Enhancements
Used by CommandNew?Error MessageResponse ID COde
ent/chg-srvselNInvalid parametercombination specified
E2155
chg/rtrv-sccp-msgNGTT feature must beON
E2584
rtrv-gtaNDestination addressmust be a full pointcode
E2859
ent/chg/dlt/rtrv-gtaNGTA/CGPC/OPC/CGSSN/CDSSN/
E3332
OPCODE/DPC aremutually exclusive
ent/chg-srvselNEGTT must be ONE3557
ent/chg/dlt/rtrv-gttNSet name must not be
specified as NONEE3565
ent/dlt/rtrv-tt
ent-gttNGTA Length does notmatch GTT Set numberof digits
E3571
ent/chg/dlt-gtaNGTA/CGPC/OPC/CGSSN/CDSSN/
E4400
OPCODE/DPC must bespecified
ent/chg/rtrv-srvselNSame option in ON &OFF params cannot bespecified
E4732
ent/chg/dlt/rtrv-gttNSETTYPE of specified
GTTSET must beCdGTA
E4997
dlt/rtrv-tt
116910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by CommandNew?Error MessageResponse ID COde
ent/chg/rtrv-srvselNConfiguration requiresE5-SM4G card or better
E5059
dlt/rtrv-gtaNFlexible Linkset
Optional Based Routingmust be ON
E5060
ent/rtrv-gttset
ent/chg/rtrv-srvselYUnable to access GTTAction table
E5067
ent/chg/rtrv-srvselYGTT Action Id does notexist
E5071
tst-msgNOPC/CGPC/CDPC/DPCNetwork Domain mustmatch
E5147
ent/chg-srvselYInvalid action typeE5172
ent/chg/dlt-gtaYDPCx parameter mustbe specified if GTTSNset type is DPC
E5267
chg/dlt-gttYXLAT=NONE entry notsupported for GTTcommands
E5268
ent/chg/dlt/rtrv-gttent/dlt/rtrv-tt
YNetwork domain ofcorresponding ttn mustnot be CROSS
E5371
GTT Actions
Table 27: Error Messages: GTT Actions
Used by ComomandNew?Error MessageResponse ID Code
chg-gttactNAt least one optional
parameter is requiredE2136
chg-gttapath
ent/chg-gtmod
ent/chg-gttaset
ent/rtrv-gtaNInvalid parameter
combination specifiedE2155
ent/chg/rtrv-gttact
ent/dlt/rtrv-gttapath
rtrv-gtmod
rtrv-gttaset
117910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by ComomandNew?Error MessageResponse ID Code
ent/chg/rtrv-gttactNPoint code out of rangeE2169
ent/chg-gttactNMissing parameterE2379
ent/dlt/rtrv-gttact-pathNLength of EGTA mustbe equal to length ofGTA
E2403
ent/dlt/rtrv-gttact-pathNEGTA cannot bespecified without GTA
E2409
ent/chg-gttactNPoint code does notexist in the routing table
E2417
ent/dlt/rtrv-gttact-pathNEGTA must be greaterthan or equal to GTA
E2420
ent/chg-gttactNPC/SSN does not existas a mated application
E2450
ent-ttNAlias already in useE2459
ent/rtrv-ttNAlias defined astranslation type
E2460
rtrv-ttNAlias not assigned totranslation name
E2461
ent/rtrv-ttNTranslation TYPEdefined as an alias
E2465
ent-ttNTranslation Typespecified does not exist
E2466
ent/rtrv-ttNTTN specified does notexist
E2468
ent-ttNTTN and TYPE do notcorrespond to eachother
E2473
ent/chg-gttactFailed reading the routetable
E2648
ent/chg-gtaNAMGTT/AMGTT
CdPA Only/AMGTTE2789
ent/chg/dlt-gtmodCgPA Upgrade must beON
ent/chg-gtt
ent/chg-gttact
ent/chg-gttactNFailed reading siteidentification table
E2874
ent/chg-gttactNFailed reading the MRNtable
E2999
118910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by ComomandNew?Error MessageResponse ID Code
ent/chg/rtrv-gtmodNHex Digit Support forGTT feature must beON
E3006
act-upgradeN<string> cannot be used
in this commandE3040
ent/chg/dlt-gttapath
ent/chg/rtrv-gttactNFull Point Code must bespecified
E3090
act-upgradeNFailed Reading GTT
TRANS tableE3119
ent/dlt/rtrv-gttapath
ent/chg/rtrv-gttapathNFailed Reading GTTDBMM table
E3120
ent-gttselNDomain indicated byGTIx must match that ofexisting TT
E3121
chg-mtc-measoptsNControlled Feature is
not enabledE3451
ent/dlt/rtrv-gttapath
rept-ftp-meas
rtrv-gttact
ent/chg/dlt/rtrv-gttselNEAGLEGEN,TT,NP(V),NAI(V) parametersmustn't be specified
E3507
ent/chg/rtrv-gttapathNFailed reading GTT SetTable
E3544
ent/chg/dlt/rtrv-gttasetNEGTT must be ONbefore this commandcan be entered
E3557
ent/chg-gttapathNGTT Set specified byGTT Set Name/indexdoes not exist
E3561
ent/rtrv-gttapathNGTT Set must not be
specified as NONEE3565
rtrv-gta
ent/chg-gttactNSSN must be inSS-APPL table when PCis true point code
E3612
ent/chg-gttactNFailed reading SS APPLtable
E3638
119910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by ComomandNew?Error MessageResponse ID Code
chg-gttapathNNo change requestedE3827
ent/chg-gtmodNSCCP Conversionfeature must be enabled
E4171
ent/chg-gtmodNGT0FILL can bespecified as ON only ifNGTI is specified
E4174
ent/chg-gtmodNIf NGTI is 4, NNP andNNAI must be specified
E4175
ent/chg-gtmodNIf NGTI is 2, NNP andNNAI cannot bespecified
E4176
ent-gtmodYIf PRECD specified,NPDS/NSDS/NPDD/NSDD must be specified
E4198
ent/chg/dlt-gttselNTT parameter must bespecified
E4367
ent/chg-gttapathNSet type of GTT SetName doesn't match
E4399
ent/chg-gttactNMRNSET must bespecified (only) if RIparameter is GT
E4475
ent/chg/rtrv-gttactNMRNSET must bespecified (only) if
E4479
FGTTLS feature isenabled
ent/chg/rtrv-gttactNSpecified MRNSET doesnot exist
E4480
ent-gttactNPC does not exist inspecified MRNSET
E4483
dlt-mrnNPC reference exists inany GTT/MAP table
E4484
ent-gttapathNTranslation entry doesnot exist
E4510
ent/chg/rtrv-gttactNMAPSET must bespecified (only) if
E4523
FGTTLS feature isenabled
ent/chg-gttactNFailed Reading MAPtable
E4524
120910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by ComomandNew?Error MessageResponse ID Code
ent/chg/rtrv-gttactNSpecified MAPSET doesnot exist
E4527
ent/chg-gttactNPC/SSN doesn't exist inMAPSET
E4528
ent/chg-gttactNMAPSET must bespecified (only) if RIparameter is SSN
E4532
ent/chg/rtrv-gttactNSCCP Loop DetectionFeature is not enabled
E4565
ent/chg/rtrv-gttactNCannot access LoopSettable
E4567
ent/chg/rtrv-gttactNLoop Set entry does notexist
E4568
ent/chg-gttactNPRX using DPC notallowed in GTT, MAP,MRN tables
E4707
ent/chg/rtrv-gtmodNSame option in ON &
OFF params cannot bespecified
E4732
ent/chg/rtrv-gttact
ent/chg/rtrv-gttaset
ent/chg-gttactNEither AMGTT orAMGTT CgPA Upgradefeature must be ON
E4789
rtrv-gttactNMAPSET and MRNSETcannot be specifiedtogether
E4837
chg-gttactNSSN must not be NONEif RI is SSN
E4880
ent/chg-gtaNIf NGTI of referred
GTMOD is 4, PC cannotbe ANSI
E4903
ent/chg-gtt
ent-gttactYGTT Action table is fullE5066
chg/dlt/rtrv-gttactYUnable to access GTT
Action tableE5067
ent/chg/dlt-gttaset
ent/chg/rtrv-gttactYUimreqd parameteronly valid for
E5068
DISC/UDTS/TCAPERRaction
121910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by ComomandNew?Error MessageResponse ID Code
ent/chg/dlt/rtrv-gttactY(New) GTT Action Id
must not beNONE/FALLBACK
E5069
ent/chg/rtrv-gttaset
rtrv-gttactYError cause parameteronly valid for
E5070
TCAPERR or UDTSaction
ent/chg/dlt/rtrv-gttactYGTT Action Id does not
existE5071
ent/chg/rtrv-gttaset
ent/chg-gttactYPC has no allowed routeE5072
ent/dlt/rtrv-gttapathNOPCODE,PKGTYPE,ACN/FAMILY must bespecified together
E5106
dlt-gttasetYGTT Action Set isreferenced bytranslations
E5112
ent-gtaY(New) GTT Action Set
name must not be noneE5113
ent/chg/dlt/rtrv-gttaset
ent/chg-gttactYGTT Action- DISCARDFeature must be enabled
E5119
ent/chg-gttactYGTT Action-DUPLICATE Featuremust be enabled
E5120
ent/dlt/rtrv-gttapathNFAMILY parameter isallowed with ANSITCAP PKGTYPE
E5140
ent/dlt/rtrv-gttapathNACN parameter isallowed with ITU TCAPPKGTYPE
E5141
ent/dlt/rtrv-gttapathNPKGTYPE abortrequires
E5144
ACN/FAMILY/OPCODEvalue none
ent/rtrv-gttapathNBoth FAMILY andOPCODE must be
E5148
NONE if either isNONE
ent/chg-gttactYInvalid action typeE5172
122910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by ComomandNew?Error MessageResponse ID Code
ent/chg/rtrv-gttaset
ent-gttapathYGTT Action Path tableis full
E5185
ent/dlt/rtrv-gttapathYUnable to access GTTAction Path table
E5186
ent-gttapathYSpecified Path entryalready exists
E5187
ent/chg/rtrv-gtaYGTT Action Set does not
existE5196
chg/dlt/rtrv-gttaset
chg-gttactYUnable to access GTT
Action Set tableE5197
ent/chg/dlt/rtrv-gta
ent/chg/dlt/rtrv-gttaset
chg/dlt-gttactYGTT Action Set isreferenced
E5198
en/tchg-gttactY(New) GTT Action Idalready exist
E5199
ent-gttasetYGTT Action Set table isfull
E5200
ent/chg-gttactYGTT Action-FORWARD Featuremust be enabled
E5201
ent-gttasetYGTT Action Id alreadyprovisioned in a GTTAction Se
E5234
chg-gttasetY(New) GTT Action Setname already exist
E5235
ent/chg/rtrv-gttasetYGTT Action Ids shouldbe unique in a GTTAction Set
E5236
ent/chg-gttactYRI must be SSN if PC isthe True PC
E5245
act-upgradeYGTMOD table is fullE5283
ent-gtmod
ent/chg/rtrv-gtaYFailed reading GTMOD
tableE5284
ent/chg/dlt/rtrv-gtmod
123910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by ComomandNew?Error MessageResponse ID Code
ent/chg/rtrv-gtt
ent/chg/rtrv-gttact
chg/dlt/rtrv-gtmodYGTMODID does not
existE5285
ent/chg/rtrv-gta
ent/chg/rtrv-gtt
rtrv-gttset
ent/chg-gtmodYGTMODID already existE5286
dlt-gtmodYGTMODID referencedin Translation/GTTAction tables
E5287
ent/chg-gtmodYPRECD must bespecified when NPD(x)
E5289
and NSD(x) arespecified
ent/chg-gtmodYCombined digit lengthof NPDS & NSDS mustnot exceed 21
E5290
ent/chg/rtrv-gttactYCGGTMODID/CDGTMODID does notexist
E5291
ent/chg/dlt/rtrv-gtmodYGTMODID must not be
specified as NONEE5292
ent-gta
ent-gtt
chg-gtmodYIf NGTI is 4, referredGTT Translation PCcannot be ANSI
E5293
chg-gtmodYNNP and NNAI can notbe NONE if NGTI is 4
E5294
chg-gtmodYGT0FILL can't be ON ifNGTI is NONE
E5295
ent-gttactYCDGTMODID/CGGTMODID must notbe specified as NONE
E5296
ent/chg/rtrv-gttactYDefault ACTID must
not be specified asNONE
E5298
ent/chg/rtrv-srvsel
124910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by ComomandNew?Error MessageResponse ID Code
entchg/rtrv-gttactYPC and CGPC must beof same domain
E5299
ent-gttactYLoop Set must not bespecified as NONE
E5310
chg/dlt-gtaYGTT Actions Path(s)
associated withTranslation entry
E5318
chg/dlt-gtt
ent/rtrv-gttapathYAt least one set-valuecombination must bespecified
E5319
dlt/rtrv-gttapathYSpecified Path entrydoesn't exists
E5369
rtrv-ttYOverlapped translationtype does not exist
E5374
ent/chg-gttapathYSpecifiedCgGTA/CdGTA is not
E5375
a start GTA in aTranslation entry
ent/chg-gttapathYSpecified path namealready exists
E5376
rtrv-gttapathYPath name and GTTset-value can't bespecified together
E5377
chg/dlt/rtrv-gttapathYSpecified path namedoesn't exist
E5378
ent/chg-gtaYIf FGTTLS feat enabled,specify MAPSETand/or MRNSET
E5381
dlt-mrnYSpecified MRNSETreferred in GTT tablewith XLAT=none
E5382
act-upgradeYNot enough memory oncard
E5383
125910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
HIPR2
Table 28: Error Messages: HIPR2
Used by CommandNew?Error MessageResponse ID Code
rept-imt-infoNS/ESHELF parametersare invalid withspecified report type
E4027
chg-ctrl-featYSome of the Locationsstill containHMUX/HIPR card
E4765
act-upgradeYIMT Rate Change
sequence is in progressE5184
alw/disc/inh/tst-imt
chg-ctrl-feat
flash-card
init-flash
init-mux
init-sys
HIPR2: Add Extended BERT parameter to TST-IMT Command
Table 29: Error Messages: HIPR2: Add Extended BERT parameter to TST-IMT Command
Used by CommandNew?Error MessageResponse ID Code
act/init-flashNIMT test in progressE3043
alw/conn/disc/inh/tst-imt
chg-ctrl-feat
clr-imt-stats
flash/init-card
init-imt-gpl
init-mux
init-network
rept-imt-info
rept-imt-lvl1
rept-imt-lvl2
tst-imtNParameter combinationinvalid
E3047
126910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by CommandNew?Error MessageResponse ID Code
tst-imtNObsolete MUX cardsdetected in the system
E4765
tst-imtYTarget bus must beIS-NR
E5188
tst-imtYTIME parameter isrequired
E5189
tst-imtYWaiting for ExtendedBERT to start - retrylater
E5252
tst-imtYExtended BERT iscompleting, can not bestopped
E5253
tst-imtYExtended BERT is not inprogress
E5254
HIPR2 - Rate Change Optimization
Table 30: Error Message: HIPR2 - Rate Change Optimization
Used by CommandNew?Error MessageResponse ID Code
chg-ctrl-featYINIT-FLASH for MUXcard(s) in progress
E5288
HIPR2 - Retrieval of Extended Statistics
Table 31: Error Messages: HIPR2 - Retrieval of Extended Statistics
Used by CommandNew?Error MessageResponse ID Code
copy/init-ext-statsN<parm_desc> is out ofrange, <min>..<max> -<parm>
E2017
copy/init-ext-statsN<parm_desc> value isundefined - <parm>
E2044
copy-ext-statsNIncorrect informationunit, expecting number- <parm>
E2051
copy/init-ext-statsNInvalid parametercombination specified
E2155
copy/init-ext-statsNInvalid card type forthis command
E2212
127910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by CommandNew?Error MessageResponse ID Code
copy/init-ext-statsNCommand already inprogress
E2412
LOCRRQ Query Response
Table 32: Error Messages: LOCREQ Query Response
Used by CommandNew?Error MessageResponse ID Code
enable-ctrl-featNA-Port or IGM must beturned ON
E2084
chg-is41optsNInvalid parametercombination specified
E2155
chg-is41optsNSame option in ON &OFF params cannot bespecified
E4732
chg-is41optsYService Portability andLOCREQ response featmust be enabled.
E5265
chg-is41optsYLOCREQ responsefeature must be enabled.
E5266
chg-is41optsYLOCREQ responsefeature must beactivated.
E5373
MTP Routed GTT
Table 33: Error Message: MTP Routed GTT
Used by CommandNew?Error MessageResponse ID Code
chg-sccpoptsNMTP routed SCCP orGWS Stop Actionfeature must be enabled
E4762
S-Port Subscriber Differentiation
Table 34: Error Messages: S-Port Subscriber Differentiation
Used by CommandNew?Error MessageResponse ID Code
chg-sccpoptsYS-Port SubscriberDifferentiation featuremust be ON
E4754
128910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by CommandNew?Error MessageResponse ID Code
enable-ctrl-featNService Portabilityfeature must be enabled
E4926
Support FastCopy on IPGW
Table 35: Error Messages: Support FastCopy on IPGW
Used by CommandNew?Error MessageResponse ID Code
chg-eisoptsNPVN/FCNA/FCNBconflicts with IPRTE orIPLNK network
E2964
chg-eisoptsNInvalid PVNE3965
chg-netopts
chg-netoptsNInvalid PVNMASKE4012
chg-eisoptsNPVN, FCNA and FCNBmust not be identical
E5013
chg-eisoptsYFCMODE parametermandatory with FCGPLparameter
E5316
chg-eisoptsYAt least one card withIPGHC GPL must beIS-NR
E5317
Support IPSG Link Capacity Sharing
Table 36: Error Message: Support IPSG Link Capacity Sharing
Used by CommandNew?Error MessageResponse ID Code
ent/chg-lsYSLKTPS/RSVDSLKTPSmust be less than orequal to MAXSLKTPS
E5075
Support of 750K System TPS
Table 37: Error Messages: Support of 750K System TPS
Used by CommandNew?Error MessageResponse ID Code
rtrv-tpsNFailed reading the linktable
E2103
rtrv-tpsNFailed reading linksettable
E2122
129910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by CommandNew?Error MessageResponse ID Code
ent/chg-lsNTotal provisioned
system IP TPS limitexceeded
E4255
ent-slk
chg-ctrl-featYFeat cannot be turnedOFF if system IP/ATMTPS exceeds 500K
E5151
Non-Feature Related
Table 38: Error Messages: Non-Feature Related
Used by CommandNew?Error MessageResponse ID Code
rtrv-data-rtdbNInvalid card locationE2025
chg-ainpoptsN<parm_desc> numdigits incorrect, min
E2045
<min> max <max> -<parm>
ent/chg-srvselNA-Port, G-Port or IGMmust be turned on
E2085
unhb-almNParameters not valid forcard type
E2131
chg-gsmoptsNInvalid parameter
combination specifiedE2155
chg-stpopts
dlt-slkNTFATCABMLQ valueexceeds number of linksin link set
E2860
rept-stat-measNPlatformenable orOamchmeas optionmust be on
E3088
chg-ctrl-featNCommand not allowedwhile in upgrade mode
E3276
dlt-gtcnvNTTA cannot be specifiedfor a direction of ITOA
E4114
chg-gsmoptsNSame option in ON &
OFF params cannot bespecified
E4732
chg-inpopts
chg-stpopts
chg-gsmoptsYMNP CRP Feature mustbe ON
E4775
130910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Used by CommandNew?Error MessageResponse ID Code
chg-ctrl-featYCRP TT must be NONEE4776
inh-imtYIMT Rate Changesequence is in progresson the specified bus
E5379
inh-imtYIMT Rate Changesequence is in progresson the alternate bus
E5380
Customer Care Center
The Tekelec Customer Care Center is your initial point of contact for all product support needs. Arepresentative takes your call or email, creates a Customer Service Request (CSR) and directs yourrequests to the Tekelec Technical Assistance Center (TAC). Each CSR includes an individual trackingnumber. Together with TAC Engineers, the representative will help you resolve your request.
The Customer Care Center is available 24 hours a day, 7 days a week, 365 days a year, and is linkedto TAC Engineers around the globe.
Tekelec TAC Engineers are available to provide solutions to your technical questions and issues 7days a week, 24 hours a day. After a CSR is issued, the TAC Engineer determines the classification ofthe trouble. If a critical problem exists, emergency procedures are initiated. If the problem is not critical,normal support procedures apply. A primary Technical Engineer is assigned to work on the CSR andprovide a solution to the problem. The CSR is closed when the problem is resolved.
Tekelec Technical Assistance Centers are located around the globe in the following locations:
Tekelec - Global
Email (All Regions): [email protected]
• USA and Canada
Phone:
1-888-FOR-TKLC or 1-888-367-8552 (toll-free, within continental USA and Canada)
1-919-460-2150 (outside continental USA and Canada)
TAC Regional Support Office Hours:
8:00 a.m. through 5:00 p.m. (GMT minus 5 hours), Monday through Friday, excluding holidays• Caribbean and Latin America (CALA)
Phone:
USA access code +1-800-658-5454, then 1-888-FOR-TKLC or 1-888-367-8552 (toll-free)
TAC Regional Support Office Hours (except Brazil):
10:00 a.m. through 7:00 p.m. (GMT minus 6 hours), Monday through Friday, excluding holidays
• Argentina
131910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Phone:
0-800-555-5246 (toll-free)• Brazil
Phone:
0-800-891-4341 (toll-free)
TAC Regional Support Office Hours:
8:30 a.m. through 6:30 p.m. (GMT minus 3 hours), Monday through Friday, excluding holidays• Chile
Phone:
1230-020-555-5468• Colombia
Phone:
01-800-912-0537• Dominican Republic
Phone:
1-888-367-8552• Mexico
Phone:
001-888-367-8552• Peru
Phone:
0800-53-087• Puerto Rico
Phone:
1-888-367-8552 (1-888-FOR-TKLC)• Venezuela
Phone:
0800-176-6497
• Europe, Middle East, and Africa
Regional Office Hours:
8:30 a.m. through 5:00 p.m. (GMT), Monday through Friday, excluding holidays
• Signaling
Phone:
+44 1784 467 804 (within UK)• Software Solutions
132910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Phone:
+33 3 89 33 54 00
• Asia
• India
Phone:
+91 124 436 8552 or +91 124 436 8553
TAC Regional Support Office Hours:
10:00 a.m. through 7:00 p.m. (GMT plus 5 1/2 hours), Monday through Saturday, excludingholidays
• Singapore
Phone:
+65 6796 2288
TAC Regional Support Office Hours:
9:00 a.m. through 6:00 p.m. (GMT plus 8 hours), Monday through Friday, excluding holidays
Emergency Response
In the event of a critical service situation, emergency response is offered by the Tekelec Customer CareCenter 24 hours a day, 7 days a week. The emergency response provides immediate coverage, automaticescalation, and other features to ensure that the critical situation is resolved as rapidly as possible.
A critical situation is defined as a problem with the installed equipment that severely affects service,traffic, or maintenance capabilities, and requires immediate corrective action. Critical situations affectservice and/or system operation resulting in one or several of these situations:
• A total system failure that results in loss of all transaction processing capability• Significant reduction in system capacity or traffic handling capability• Loss of the system’s ability to perform automatic system reconfiguration• Inability to restart a processor or the system• Corruption of system databases that requires service affecting corrective actions• Loss of access for maintenance or recovery operations• Loss of the system ability to provide any required critical or major trouble notification
Any other problem severely affecting service, capacity/traffic, billing, and maintenance capabilitiesmay be defined as critical by prior discussion and agreement with the Tekelec Customer Care Center.
133910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Related Publications
For information about additional publications that are related to this document, refer to the RelatedPublications document. The Related Publications document is published as a part of the ReleaseDocumentation and is also published as a separate document on the Tekelec Customer Support Site.
Customer Training
Tekelec offers a variety of technical training courses designed to provide the knowledge and experiencerequired to properly provision, administer, operate, and maintain Tekelec products. To enroll in anyof the courses or for schedule information, contact the Tekelec Training Center at (919) 460-3064 orE-mail [email protected].
A complete list and schedule of open enrollment can be found at www.tekelec.com.
Locate Product Documentation on the Customer Support Site
Access to Tekelec's Customer Support site is restricted to current Tekelec customers only. This sectiondescribes how to log into the Tekelec Customer Support site and locate a document. Viewing thedocument requires Adobe Acrobat Reader, which can be downloaded at www.adobe.com.
1. Log into the Tekelec Customer Support site.
Note: If you have not registered for this new site, click the Register Here link. Have your customernumber available. The response time for registration requests is 24 to 48 hours.
2. Click the Product Support tab.3. Use the Search field to locate a document by its part number, release number, document name, or
document type. The Search field accepts both full and partial entries.4. Click a subject folder to browse through a list of related files.5. To download a file to your location, right-click the file name and select Save Target As.
EAGLE 5 ISS Card Overview Table
The EAGLE 5 ISS Card Overview table is a resource table that provides an overview of informationfor cards that can be provisioned in the EAGLE 5 ISS. For a detailed description of supported hardware,see the Hardware Baseline.
This table lists the following card information:
• The name of the card on the card label• The card part number• The provisioned card type
134910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
• The number of shelf slots that the card occupies (1 or 2)• The number of physical ports on the card• The maximum number of links that can be assigned to the card• The GPLs and applications that can run on the card
Table 39: EAGLE 5 ISS Card Overview Table
Card
Applications
Card
GPLs
Linksper
Card
Per Card
Slots/Ports
ProvisionedCard Type
Part NumberCard Nameas shown on
card label
stplanbpdcm
vwxslan1 IPService2
2dcm870-1945-01
870-1945-02
870-1945-03DCM
iplimbpdcm
22
870-1984-01(DCMX)
iplimiiplim
iplimi
ss7ipgwbpdcm
12ipgwi
ss7ipgw
ipgwi
eroutebpdcm
eroute2 IPService22stc
stplanbpdcm
vwxslan1 IPService
21dcm
870-2372-01
870-2372-08
870-2372-13^EDCM
(SSEDCM)
iplimbpdcm
8iplimi
iplim
iplimi
ss7ipgwbpdcm
1ipgwi
ss7ipgw
ipgwi
eroutebpdcm
eroute2 IPService21stc870-2372-01
135910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Card
Applications
Card
GPLs
Linksper
Card
Per Card
Slots/Ports
ProvisionedCard Type
Part NumberCard Nameas shown on
card label
stplanbpdcm
vwxslan1 IPService21dcm
870-2508-01
870-2508-02^
EDCM-A
(SSEDCM)eroute
bpdcm
eroute2 IPService21stc
vsccp
bpdcm
vsccp2 IPservice22dsm
1 GB MEM
870-1984-02
DSM†
gls
870-1984-08
870-1984-09
870-1984-15^
870-1984-17^
2 GB MEM
870-1984-03
4 GB MEM870-1984-05
870-1984-06
870-1984-07
870-1984-13^
870-1984-16^
ipsbpdcm
ips1 IPservice
2(useonlyA)
1ipsm
870-2371-02
870-2371-06
870-2371-08
870-2371-13^
DSM-1G
mcp
bpdcm
bpdcm21 IPservice
2(useonlyA)
1mcpm
870-2372-03
870-2372-07
870-2372-09
870-2372-14^
EDSM-2G*
mcp
870-2372-15^
136910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Card
Applications
Card
GPLs
Linksper
Card
Per Card
Slots/Ports
ProvisionedCard Type
Part NumberCard Nameas shown on
card label
ss7ansiss7ml821
lime1
limt1
870-2198-01
870-2198-02
E1/T1 MIM††ccs7itubpmplt
limch
870-2198-03
870-2198-04
870-2198-07^
atmitu
atmitu
bphcap121lime1atm
870-2455-01
870-2455-02E1-ATM
bphcapt870-2455-03
870-2455-05^
atmansiatmhc34 (3used)
1limatm
lime1atm
870-1872-01^
870-1872-02^
E5-ATM
atmitublbepm
blcpld
bldiag6
blvxw6
imtpci
ss7ansiss7hc3281
lime1
limt1
870-1873-02
870-1873-03^
870-1873-04^
E5-E1T1
ccs7itublbepm
blidag6
blvxw6 ccs7itu181lime1 (forSE-HSL)
blcpldss7ansi181limt1 (for
ST-HSL-A) imtpci
pldpmc1
iplim
iplhc
1621dcm
870-2212-02
870-2212-03^E5-ENET
iplimi
blbepm
bldiag6
870-2212-04^ blvxw6
870-2212-05^ blcpld
imtpci
137910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Card
Applications
Card
GPLs
Linksper
Card
Per Card
Slots/Ports
ProvisionedCard Type
Part NumberCard Nameas shown on
card label
ss7ipgw
ipghc
121ipgwi
blbepm
bldiag6
blvwx6
blcpld
imtpci
stplanslanhc2 IPService
21
blbepm
bldiag6
blvxw6
blcpld
imtpci
erouteerthc2 IPService
21stc
blbepm
bldiag6
blvxw6
blcpld
imtpci
ipsgipsg3221enet
blbepm
bldiag6
blvxw6
blcpld
imtpci
ipsipshc
1 ipshcservice
2(useonlyA)
1
ipsm870-2877-01^
870-2877-02^
E5-IPSM
blbepm
bldiag6
blvxw6
blcpld
138910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Card
Applications
Card
GPLs
Linksper
Card
Per Card
Slots/Ports
ProvisionedCard Type
Part NumberCard Nameas shown on
card label
imtpci
oamoamhcN/A22N/A870-2903-01^E5-MASP
blmcap
N/AN/AN/AN/A2N/A870-2900-01^E5-MDAL
vsccpsccphc2 IPService
22dsm870-2860-01^
870-2860-02^
E5-SM4G
blbsmg
bldiag6
blvxw6
blcpld
imtpci
glsglshcN/A11tsm870-2943-03^E5-TSM
blbepm
bldiag6
blvxw6
blcpld
imtpci
oam
eoam
bpdcmN/AN/A1N/A
870-2360-01
870-2360-05
GPSM-II
bpdcm2
870-2360-06
870-2360-08^
870-2360-09^
ss7ansiss7hc6482
lime1
limt1
870-2671-01
870-2671-02
870-2671-03^
HC-MIM††
ccs7itublbios
bldiag6
blvxw6ccs7itu
28
2
lime1 (forSE-HSL)
blcpld
imtpci
pldpmc1
139910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Card
Applications
Card
GPLs
Linksper
Card
Per Card
Slots/Ports
ProvisionedCard Type
Part NumberCard Nameas shown on
card label
hiprhiprN/AN/A1N/A870-2574-01
870-2574-02^HIPR
hipr2hipr2N/AN/A1N/A870-2872-01^HIPR2
870-2872-02^
bphmuxbphmuxN/AN/A1N/A870-1965-01
870-1965-03^HMUX
atmansi
atmansi
bphcap121limatm
870-1293-02
870-1293-03
LIM-ATM
bphcapt
870-1293-06
870-1293-07
870-1293-08
870-1293-10
870-1293-13^
N/AN/AN/AN/A2N/A
870-0773-04
870-0773-05
MDAL870-0773-06
870-0773-08
870-0773-09^
870-0773-10^
ss7ansibpmpl
ss7ml821limds0
870-2061-01
870-2061-03
870-2061-04MPL
870-2061-06^
N/AN/AN/AN/A1N/A
870-0774-08
870-0774-10TDM
870-0774-11
N/AN/AN/AN/A1N/A870-0774-15TDM-GTI
140910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Card
Applications
Card
GPLs
Linksper
Card
Per Card
Slots/Ports
ProvisionedCard Type
Part NumberCard Nameas shown on
card label
870-0774-18^
glsgls
imtN/AN/A1tsm
870-1289-02
870-1289-03
870-1289-04TSM-256
870-1289-06^
870-1289-07^
glsgls
imtN/AN/A1tsm
870-1290-02
870-1290-03
870-1290-04
TSM-512
glsgls
imtN/AN/A1tsm
870-1291-02
870-1291-03
870-1291-04
TSM-768
glsgls
imtN/AN/A1tsm
870-1292-02
870-1292-03
870-1292-04
TSM-1024
*Although the system allows 250 MCPM cards, practical usage is 2.
†DSM or E5-SM4G cards are required for the LNP, 50,000 GTT, or EPAP-related features. Formore information about turning these features on, refer to the appropriate manual.
††For the E1 or T1 interface, an SS7 application (SS7ANSI or CCS7ITU) can be assigned to thesecards.
For more information on the E1 or T1 interface go to Chapter 3 “System AdministrationProcedures” in the Database Administration Manual - SS7.
^This part number is the ROHS equivalent of the immediately preceding part number.
Hardware Baseline
The Hardware Baseline is shown in the following table.
141910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Table 40: Hardware Baseline
Required forROHS Number (ifapplicable)
Part NumberComponent
HMUX870-2321-08 Rev A870-2321-02 Rev AControl Shelf
HMUX, Standard Frame870-2321-04 Rev A
HMUX, Heavy DutyFrame
870-2377-02 Rev A870-2377-01 Rev A
870-0775-03 Rev EControl Shelf Backplane
Heavy Duty Frame870-2378-02 Rev A870-2378-01 Rev AExtension Shelf
Standard Frame870-0776-02 Rev C
870-0776-03 Rev D
870-0776-06 Rev A
870-0776-07 Rev A
870-0776-08 Rev A or
870-0776-11 Rev A
Shelves with FanAssembly
870-1824-02 Rev A870-1824-01 Rev AAir Management Card
870-1945-01 Rev A orDCM
870-1945-02 Rev A or
870-1945-03 Rev A
870-1984-01 Rev ADCMX
870-2372-01 Rev E orEDCM (single slot)
870-2372-13 Rev A870-2372-08 Rev A
870-2508-02 Rev A870-2508-01 Rev AEDCM-A (single slot)
870-1984-02 Rev A orDSM, 1GB MEM
870-1984-08 Rev A or
870-1984-15 Rev A870-1984-09 Rev A
870-1984-17 Rev A
870-1984-03 Rev ADSM, 2GB MEM
Heavy Duty Frame870-1984-05 Rev ADSM, 4GB MEM
870-1984-06 Rev A or
870-1984-13 Rev A870-1984-07 Rev A
142910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Required forROHS Number (ifapplicable)
Part NumberComponent
870-1984-16 Rev A
870-2371-02 Rev ADSM-1G
870-2371-06 Rev A
870-2371-13 Rev A870-2371-08 Rev A or
870-2372-03 Rev AEDSM-2G (MCPM)
870-2372-07 Rev A
870-2372-14 Rev A870-2372-09 Rev A or
870-2372-15 Rev A
870-2198-01 Rev G orE1/T1 MIM
870-2198-02 Rev A or
870-2198-03 Rev A or
870-2198-07 Rev A870-2198-04 Rev A
870-2455-01 Rev BE1-ATM
870-2455-02 Rev B
87-02455-05 Rev A870-2455-03 Rev A
870-1872-01 Rev AE5-ATM
870-1872-02 Rev A
830-1342-05E5-ATM Adapter
870-1873-03 Rev A870-1873-02 Rev AE5-E1T1
870-1873-04 Rev A
870-2212-03 Rev A870-2212-02 Rev AE5-ENET
870-2212-04 Rev A
870-2212-05 Rev A
870-2877-01 Rev AE5-IPSM
870-2877-02 Rev A
870-2903-01 Rev CE5-MASP
870-2900-01 Rev AE5-MDAL
870-2860-01 Rev FE5-SM4G
870-2860-02 Rev A
870-2943-03 Rev AE5-TSM
143910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Required forROHS Number (ifapplicable)
Part NumberComponent
Standard frame orstandard frame withHC-MIMs
870-1606-01 Rev A orFAP
870-1606-05 Rev A870-1606-02 Rev A
Heavy duty frame orheavy duty frame withHC-MIMs
870-2320-03 Rev A870-2320-01 Rev A
870-2804-01 Rev B870-1823-01 Rev B
870-0243-08 Rev CFAP-CF/EF
870-0243-09 Rev CFAP-MISC
870-2804-01 Rev AFAP Fuse and AlarmPanel
830-1343-01 Rev AFast Copy AdapterUpper
830-1343-02 Rev AFast Copy AdapterLower
870-2360-01 Rev EGPSM-II
870-2360-05 Rev A
870-2360-08 Rev A870-2360-06 Rev A
870-2360-09 Rev A
870-2671-01 Rev P orHC-MIM
870-2671-03 Rev A870-2671-02 Rev B
870-2574-02 Rev A870-2574-01 Rev DHIPR
870-2872-01 Rev AHIPR2
870-2872-02 Rev A
830-1344-xxHigh-speed FiberChannel Cable
870-1965-03 Rev A870-1965-01 Rev AHMUX
870-1293-02 Rev A orLIM-ATM
870-1293-03 Rev A or
870-1293-06 Rev A or
870-1293-07 Rev A or
870-1293-08 Rev B or
870-1293-13 Rev A870-1293-10 Rev A or
144910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Required forROHS Number (ifapplicable)
Part NumberComponent
870-0773-04 Rev B orMDAL
870-0773-05 Rev A or
870-0773-06 Rev A or
870-0773-09 Rev A870-0773-08 Rev A
870-0773-10 Rev A
870-2061-01 Rev A orMPL
870-2061-03 Rev A or
870-2061-06 Rev A870-2061-04 Rev A
890-1843-02 Rev A890-1843-01 Rev CMPS DC FrameAssembly
890-1801-02 Rev A890-1801-01 Rev EMPS in Heavy DutyFrame
870-0774-08 orTDM
870-0774-10 Rev A or
Rev C required ifinstalled in a system
870-0774-11 Rev A
with more than 11shelves
870-0774-18 Rev A870-0774-15 Rev BTDM GTI
870-1289-02 Rev A orTSM-256
870-1289-03 Rev A or
870-1289-06 Rev A870-1289-04 Rev A
870-1289-07 Rev A
870-1290-02 Rev A orTSM-512
870-1290-03 Rev A or
870-1290-04 Rev A
870-1291-02 Rev A orTSM-768
870-1291-03 Rev A or
870-1291-04 Rev A
870-1292-02 Rev A orTSM-1024
870-1292-03 Rev A or
870-1292-04 Rev A
145910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
Required forROHS Number (ifapplicable)
Part NumberComponent
890-1037-06 Rev A890-1037-01 Rev AKit E1
890-1013-01 Rev AKit, Holdover ClockAssy
890-1038-01 Rev DFan Assy (StandardFrame)
890-0001-01 Rev A orFan Assy (Shelves withHC-MIM cards)
890-0001-04 Rev A890-0001-02 Rev A
870-2640-03 Rev A870-2640-01 Rev FT1000 ApplicationServer
T1000 ApplicationServer
870-2706-04 Rev A870-2706-02 Rev BDual Port G-Bit E-NetCard
T1000 ApplicationServer
870-2707-02 Rev A870-2707-01 Rev BModem Card
T1000 ApplicationServer
870-2708-02 Rev A870-2708-01 Rev BQuad Serial Exp. Card
T1000 ApplicationServer
870-2721-04 Rev A870-2721-02 Rev B120 GB Hard DriveAssy
870-1893-03 Rev A870-2754-01 Rev P orT1100 (ApplicationServer - DC)
870-2807-01 Rev A
T1100 (ApplicationServer - DC)
870-2706-04 Rev A870-2706-02 Rev ADual Port Ethernet
T1100 (ApplicationServer - DC)
870-2787-02 Rev A870-2787-01 Rev BHard Disc Drive - 250GB SATA
T1100 (ApplicationServer - DC)
870-2833-02 Rev A870-2833-01 Rev C2 GB RAM Kit
146910-5857-001 Revision E, May 2011
EAGLE 5 ISS Release 42.0Feature Notice
GlossaryA
AnalyzedInformation QueryAIQ
Name for the local subsystem andservice for the ANSI41 AIQ feature.
The short name for the ANSI-41AnalyzedInformation Query.
ANSI41 AIQ
Additional Subscriber DataASD
Additional data that is associatedwith a subscriber (DN) or a rangeof subscribers.
Any Time InterrogationATI
An ATI message allows an externalserver to interrogate an HLR andobtain information about thelocation and/or state of a GSMsubscriber.
Asynchronous Transfer ModeATM
A packet-oriented transfer mode thatuses an asynchronous time divisionmultiplexing technique to multiplexinformation flow in fixed blocks,called cells.
A high-bandwidth, low-delayswitching, and multiplexingtechnology to support applicationsthat include high-speed data, localarea network interconnection,multimedia application and imaging,and residential applications such asvideo telephony and otherinformation-based services.
B
147910-5857-001 Revision E, May 2011
B
Bit Error Rate TestBERT
C
The application for the ITU SS7signaling links that is used with card
CCS7ITU
types limds0, limch, lime1,and limt1.
Code Division Multiple AccessCDMA
Called Party AddressCdPA
The field in the SCCP portion of theMSU that contains the additionaladdressing information of thedestination of the MSU. Gatewayscreening uses this additionalinformation to determine if MSUsthat contain the DPC in the routinglabel and the subsystem number inthe called party address portion ofthe MSU are allowed in the networkwhere the EAGLE 5 ISS is located.
Calling Party AddressCgPA
The point code and subsystemnumber that originated the MSU.This point code and subsystemnumber are contained in the callingparty address in the SCCP portionof the signaling information field ofthe MSU. Gateway screening usesthis information to determine ifMSUs that contain this point codeand subsystem number area allowedin the network where the EAGLE 5ISS is located.
Circular Route PreventionCRP
An MNP, INP, or A-Port feature thatdetects instances of circular routingcaused by incorrect information inone or more of the network number
148910-5857-001 Revision E, May 2011
GlossaryFeature Notice
C
portability databases. If a circularroute has been detected, a messagewill be generated by the EAGLE 5ISS and returned to the originator.
D
Destination AuditDAUD
Database Communication ModuleDCM
The DCM provides IP connectivityfor applications. Connection to ahost is achieved through an ethernetLAN using the TCP/IP protocol.
Destination Point CodeDPC
DPC refers to the scheme in SS7signaling to identify the receivingsignaling point. In the SS7 network,the point codes are numericaddresses which uniquely identifyeach signaling point. This point codecan be adjacent to the EAGLE 5 ISS,but does not have to be.
Database Service Module.DSM
The DSM provides large capacitySCCP/database functionality. TheDSM is an application card thatsupports network specific functionssuch as EAGLE ProvisioningApplication Processor (EPAP),Global System for MobileCommunications (GSM), EAGLELocal Number Portability (ELAP),and interface to Local ServiceManagement System (LSMS).
E
The European equivalent of T1 thattransmits digital data over atelephone network at 2.048 Mbps.
E1
149910-5857-001 Revision E, May 2011
GlossaryFeature Notice
E
EPM-based E1/T1 Multi-ChannelInterface Module
E5-E1T1
An EPM-based card that providesE1 and T1 connectivity. The E5indicates the card is for existingEAGLE 5 control and extensionshelves. E1T1 is an abbreviation forthe ITU E1 and ANSI T1 interfaces.Thus the nomenclature defines theshelves where the card can be usedand the physical interface that itprovides.
EPM-based Ethernet cardE5-ENET
A high capacity single-slot IPsignaling card (EPM card plus GigEthernet PMC cards).
EAGLE 5 Integrated MonitoringSupport
E5IS
The EAGLE 5 Integrated MonitoringSupport feature allows the networktraffic on the EAGLE 5 ISS’ssignaling links to be monitored byan ESP (extended services platform)or IMP (integrated message feeder)without additional intrusive cabling.Message Signaling Units (MSUs),alarms, and events are copied to theSentinel/IMF to provide the networktraffic monitoring. The monitoredtraffic is delivered to theSentinel/IMF using the EAGLE’SSTCs (Signaling Transport Cards)which are connected to the ESP/IMFsubsystem by Ethernet links. TheESP/IMF subsystem delivers themonitored traffic to theSentinel/IMF.
E5 series 4th Generation ServiceModule card.
E5-SM4G card
The E5-SM4G uses 2 card slots,provides 2 IP service links per card,
150910-5857-001 Revision E, May 2011
GlossaryFeature Notice
E
and runs the SCCPHC GPL and theVSCCP application.
Enhanced Database CommunicationModule
EDCM
Enhanced GSM MAP Screeningfeature
EGMS
Enhanced Global Title TranslationEGTT
A feature that is designed for thesignaling connection control part(SCCP) of the SS7 protocol. TheEAGLE 5 ISS uses this feature todetermine to which service databaseto send the query message when aMessage Signaling Unit (MSU)enters the system.
F
File Transfer AreaFTA
A special area that exists on eachOAM hard disk, used as a stagingarea to copy files to and from theEAGLE 5 ISS using the Kermitfile-transfer protocol.
File Transfer ProtocolFTP
A client-server protocol that allowsa user on one computer to transferfiles to and from another computerover a TCP/IP network.
G
Gigabyte — 1,073,741,824 bytesGB
Generic Routing NumberGRN
Global Title AddressGTA
151910-5857-001 Revision E, May 2011
GlossaryFeature Notice
G
Global Title TranslationGTT
A feature of the signaling connectioncontrol part (SCCP) of the SS7protocol that the EAGLE 5 ISS usesto determine which service databaseto send the query message when anMSU enters the EAGLE 5 ISS andmore information is needed to routethe MSU. These service databasesalso verify calling card numbers andcredit card numbers. The servicedatabases are identified in the SS7network by a point code and asubsystem number.
H
High Capacity Multi-ChannelInterface Module
HC-MIM
A card that provides access to eightE1/T1 ports residing on backplaneconnectors A and B. Each datastream consists of 24 T1 or 31 E1 DS0signaling links assigned in atime-division multiplex (TDM)manner. Each channel occupies aunique timeslot in the data streamand can be selected as a localsignaling link on the interface card.Each card has 8 E1 or 8 T1 portinterfaces with a maximum of 64signaling links provisioned amongthe 8 E1/T1 ports.
High-Speed IMT Packet RouterHIPR
A card that provides increasedsystem throughput and trafficcapacity. HIPR moves EAGLE froman intra-shelf ring topology to anintra-shelf switch topology. HIPRacts as a gateway between theintra-shelf IMT BUS, running at125Mbps, and the inter-shelfoperating at 1.0625Gbps. The HIPRcard will seat in the same slot as an
152910-5857-001 Revision E, May 2011
GlossaryFeature Notice
H
HMUX card (slots xx09 & xx10 ofeach shelf).
High-Speed IMT Packet Router 2HIPR2
A card that provides increasedsystem throughput and trafficcapacity on the existingFibre-Channel ring. A high rateFibre-Channel option of 2.5 Gbps isavailable when an EAGLE isprovisioned with all HIPR2 cards.In a mixed topology where a HIPR2is used in an EAGLE along withHMUX and HIPR, the Fibre-Channelring runs at the lower rate of 1.0625Gbps.
Home Location RegisterHLR
High-Speed MultiplexerHMUX
A card that supports therequirements for up to 1500 links,allowing communication on IMTbuses between cards, shelves andframes. HMUX cards interface to 16serial links, creating a ring from aseries of point to point links. EachHMUX card provides a bypassmultiplexer to maintain the ring’sintegrity as cards are removed andinserted into an operational shelf.
High-Speed IMT Multiplexer, areplacement card for the IPMX.
I
In Service - AbnormalIS-ANR
The entity is in service but only ableto perform a limited subset of itsnormal service functions.
Integrated Signaling SystemISS
L
153910-5857-001 Revision E, May 2011
GlossaryFeature Notice
L
A link interface module (LIM) withthe ATM interface.
LIM-ATM
Local Number PortabilityLNP
Location Request MessageLOCREQ
A TDMA/CDMA MSC query to anHLR for retrievingsubscription/location informationabout a subscriber to terminate avoice call.
Long Term EvolutionLTE
The next-generation network beyond3G. In addition to enabling fixed tomobile migrations of Internetapplications such as Voice over IP(VoIP), video streaming, musicdownloading, mobile TV, and manyothers, LTE networks will alsoprovide the capacity to support anexplosion in demand forconnectivity from a new generationof consumer devices tailored to thosenew mobile applications.
M
SS7 MTP3-User Adaptation LayerM3UA
M3UA enables an MTP3 User Partto be connected to a remote MTP3via a reliable IP transport.
Measurement Collection and PollingModule
MCPM
The Measurement Collection andPolling Module (MCPM) providescomma delimited core STPmeasurement data to a remote serverfor processing. The MCPM is anEDSM with 2 GB of memory runningthe MCP application.
154910-5857-001 Revision E, May 2011
GlossaryFeature Notice
M
Maintenance Disk and AlarmMDAL
Multi-Channel Interface ModuleMIM
Multi-port LIMMPL
Mobile Switching CenterMSC
Mobile Station InternationalSubscriber Directory Number
MSISDN
The MSISDN is the network specificsubscriber number of a mobilecommunications subscriber. This isnormally the phone number that isused to reach the subscriber.
Message Signal UnitMSU
The SS7 message that is sent betweensignaling points in the SS7 networkwith the necessary information toget the message to its destinationand allow the signaling points in thenetwork to set up either a voice ordata connection between themselves.The message contains the followinginformation:
• The forward and backwardsequence numbers assigned tothe message which indicate theposition of the message in thetraffic stream in relation to theother messages.
• The length indicator whichindicates the number of bytes themessage contains.
• The type of message and thepriority of the message in thesignaling information octet of themessage.
• The routing information for themessage, shown in the routing
155910-5857-001 Revision E, May 2011
GlossaryFeature Notice
M
label of the message, with theidentification of the node thatsent message (originating pointcode), the identification of thenode receiving the message(destination point code), and thesignaling link selector which theEAGLE 5 ISS uses to pick whichlink set and signaling link to useto route the message.
R
Routing NumberRN
Real Time DatabaseRTDB
S
Signaling Connection Control PartSCCP
Synchronous E1 High Speed LinkSE-HSL
Format for E1 high-speed signalinglinks where time-slot 0 is used forframing and error control. Theremainder of bandwidth, equivalentto 31 channels of 64Kbps data, isused as a single data link yielding atotal capacity of 1.984 Mbps. Alsoknown as Unchannelized E1.
DSM card or E5-SM4G card thatcontains the Real Time Database
Service Module card
(RTDB) downloaded from an EPAPor ELAP system.
Service Information FieldSIF
MTP Service Information Field isthe payload field of an SS7 MSUheader. The first byte of the SIF isthe start of the MTP3 routing label.For MTP3-variant networks, themaximum SIF size is 272 bytes. For
156910-5857-001 Revision E, May 2011
GlossaryFeature Notice
S
MTP3b-variant networks, themaximum SIF size is 4095 bytes.
Signaling Information FieldSIF
The name given to an IETF workinggroup that produced specifications
SIGTRAN
for a family of protocols that providereliable datagram service and userlayer adaptations for SS7 and ISDNcommunications protocols. The mostsignificant protocol defined by theSIGTRAN group was the StreamControl Transmission Protocol(SCTP), which is used to carry PSTNsignalling over IP.
The SIGTRAN group wassignificantly influenced bytelecommunications engineers intenton using the new protocols foradapting VoIP networks to the PSTNwith special regard to signalingapplications. Recently, SCTP isfinding applications beyond itsoriginal purpose wherever reliabledatagram service is desired.
Service PortabilityS-Port
A number portability extensionwhich allows a subscriber to retainthe same subscriber number whenmoving from one network type orservice technology to another withinthe network of a single operator.Service Portability provides differentrouting number digits for formatsthat require routing numbers.Service Portability does not affectmessage flows.
Signaling System #7SS7
SS7 ANSISS7ANSI
157910-5857-001 Revision E, May 2011
GlossaryFeature Notice
S
An application used by the LIMcards and the E1/T1 MIM card forthe MTP functionality.
Single Slot Enhanced DataCommunications Module
SSEDCM
Subsystem Prohibited networkmanagement message.
SSP
Subsystem Prohibited SCCP (SCMG)management message. (CER)
Signaling Transport CardSTC
The Signaling Transport Card (STC)is a member of the DCM card familywith an “eroute” generic programload (GPL) installed. The STCsprovide the IP interface between theLIM cards on the IMT bus and theSignaling Extended ServicesPlatform (ESP) subassembly. TheSTC is used for sending MSU datato the ESP/IMF.
T
Transmission Level 1T1
A T1 interface terminates ordistributes T1 facility signals for thepurpose of processing the SS7signaling links carried by the E1carrier.
A leased-line connection capable ofcarrying data at 1,544,000bits-per-second.
Terminal Disk ModuleTDM
Time Division Multiplexing
TDM Global Timing InterfaceTDM-GTI
158910-5857-001 Revision E, May 2011
GlossaryFeature Notice
T
Transactions Per SecondTPS
Translation Services ModuleTSM
Provides translation capability andGlobal Title Translation (GTT)implementation for the LocalNumber Portability (LNP) functionand is used for downloadinggateway screening tables to linkinterface modules (LIMs).
Translation Type.TT
Resides in the Called Party Address(CdPA) field of the MSU anddetermines which service databaseis to receive query messages. Thetranslation type indicates whichGlobal Title Translation tabledetermines the routing to aparticular service database.
U
Unitdata TransferUDT
X
Extended User DataXUDT
159910-5857-001 Revision E, May 2011
GlossaryFeature Notice