Technology and design for joinery and cabinetry. Design Preview.pdfanyone involved in the design, specification, manufacture or installation of domestic and commercial fit-outs. In

4-7 JULY 2018ICC SYDNEY

EXHIBITION CENTREDARLING HARBOUR

Technology and design for joinery and cabinetry. Linking specifiers with product suppliers.

Page 2 I AWISA 2018 DESIGN PREVIEW

THE EXHIBITION

AWISA design is Australia’s specialist interior design show. The show should be visited by anyone involved in the design, specification, manufacture or installation of domestic and commercial fit-outs. In particular it provides the opportunity for specifiers to connect with product suppliers.

The most sophisticated and beautiful of products will be on display, aimed at a market that has a very high usage of the very best that the world has to offer.

AWISA design is a large event. It occupies over 9000 square metres on level 4 at ICC Sydney Exhibition Centre, Darling Harbour. The top ten exhibitors have display areas that on average exceed 300 square metres of space each.

Visitors will see a wide range of board and panel products, surface materials and finishes, cabinet and architectural hardware, furniture fittings, components and software for the design and manufacture of domestic and commercial interiors.

Products for kitchens, bathrooms, shop, office and hotel fit-outs, and other internal joinery, furniture and cabinetry.

www.awisa.com

AWISA Design

AWISA 2018 DESIGN PREVIEW I Page 3

THE EXHIBITION

CAFECAFE

1112

1113

1101

1106

1109

1110

1111

1102

1128

1134

1137

11471146

1201

1204

1203

1230

1232

1236

1302

1303 1418

14201501 16

21 1701

1720 1721

1725

1726

1822

1417

12121508

1526

1528

1713

1707

1518

1210

CAFE 1 CAFE 2

1507

1823 1854

18261825 18271141

1143

1145

1142

1149

1807

1811

18131814

18161815

1846

1848

1849

1853

1801 1802

1803 1804

1805 1806

1840

1841

1842

1845

1237 1309 1325 1407

13191220

1519 1619 1719

1304 1320 1401 1520 1601 1620

1607

1626

16271709 1710

ENTRANCE

1824

1114

1117

4101

4102

4106

4108

4107

4109

4110 4111

4112

4118

4120

4124

4127

4201 4202

4203

42114212

4213

4215

4223

4229

4233

4301

4309

4311

4327

4401

4409

4427

4501

4503

4511

4529

4601 4602

4603

4604

4606

4608

4610

4611

4615

4623

4629

4630

4631

4632

4701

4704

4705

4706

4708

4709

4711

4712

4713

4715

4718

4719

4720

4721

4722

AWISA DESIGN CAFE

CAFE

4622

4128

4633

ENTRANCE

Meeting Room

Meeting Room

ARCHETYPE JOINERY 4631

BELLA GROUP 4203

BLUM AUSTRALIA 4427

BRIGGS VENEERS 4124

CABINET MAKERS & DESIGNERS ASSN 4712

CMIB 4106

CARTER HOLT HARVEY PINE PANELS 4610

CASF AUSTRALIA 4111

CODELOCKS AUSTRALIA 4719

DMK FOREST PRODUCTS 4101

DOMUS LINE SRL 4229

EGR 4102

ELITE PUBLISHING 4705

FIT 4127

FLEXIJET AUSTRALIA 4604

FLEXIPANEL BY FLEX CORP 4603

FIAA 4713GRASS AUSTRALIA NZ 4623GREG STEELE TRADING 4309HAFELE AUSTRALIA 4511, 4611, 4615HARN 4120HAWA SLIDING SOLUTIONS AG 4709HETTICH AUSTRALIA 4311KBDi 4108, 4109KITCHEN KING 4622KONIG AUSTRALIA 4630LAMICOLOR DUROPAL 4112LAMINEX AUSTRALIA 4301LINCOLN SENTRY 4327, 4223MEGANITE 4201MULTIMASTER AUSTRALIA 4107NEW AGE VENEERS 4215NOVER & CO 4401OLIVERI 4118PAINT HOLDINGS 4213

PLANIT 4601POINT POD 4632POLYTEC 4409PRECISE PRECUT 4704PYTHA PARTNERS AUSTRALIA 4602QUICKCAM SYSTEMS 4606SOLU 4701SURTECO AUSTRALIA 4212TABMA 4608TENSORGRIP 4706TESROL JOINERY 4501TITUS TEKFORM 4503URBAN REPUBLIC 4202VAUTH-SAGEL 4233VIEW FURNITURE 4718WILSON & BRADLEY 4529, 4629ZOBEL AUSTRALIA 4720LIST CORRECT AT 24 MARCH 2018

LEVEL 4: AWISA DESIGN


THE EXHIBITION

THE REVOLUTIONARY TITUS T-TYPE HINGEThe T-type hinge by Titus is the perfect solution for high-end kitchens, featuring soft close damping integrated into the hinge cup for a lifetime of consistent performance and consumer satisfaction. The simple toolless mounting system with innovative 3-Way ‘snap-on’ saves valuable time in cabinet assembly and a high tolerance ensures reliable closing even in case of accidental misalignment. Hinge-to-plate attachment creates stability and rigidity while also enabling a smooth performance with no rebounce.

Titus Tekform Pty LtdStand 4503Phone 02 9826 0007

INTRODUCING NEW CLASSIC OAK BY LAMINEX®

Inspired by one of the world’s most sought after natural timbers, Laminex Classic Oak delivers true naturalism with heartwood and sapwood detail, subtle planking and tone on tone colour balance. Highly versatile, this stunning new design is perfect for both modern contemporary spaces and classically driven schemes in both residential and commercial projects. Order a sample today at laminex.com.au.

Laminex AustraliaStand 4301Phone 132 136

ATMOSPHERE AND STYLE WITH L&S LIGHTINGHelping to creating atmosphere, functionality and style to kitchens, is the L&S lighting range available at Wilson & Bradley. Since its inception in Italy in 1977, L&S has grown to become a market leader in the LED lighting sector around the globe due to its advanced technical knowledge, stringent quality control and mission to always bring new and innovative products to the market. Perfectly complementing Wilson & Bradley’s existing high-end products from Blum and Wesco, the L&S range includes Sensor LED, Emotion LED, Touch LED and strip lighting.

Wilson & BradleyStand 4529Phone 1800 633 507

FROM SITE MEASURE TO CAD IN A SINGLE STEPThe recent release of the ‘Next Generation’ Flexijet 3D has now advanced site measuring to the next level. This revolutionary laser measurement system measures and instantly creates a 3D CAD drawing with a precision of 0.9mm. Measure walls, curves, arches, doors, windows, bulkheads and any other feature encountered on a work site like never before. Awarded the German Federal Award for ‘Excellence in Innovation’ in 2011, Flexijet 3D is an indispensable tool for any site measuring project.

Flexijet AustraliaStand 4604Phone 1300 077 977

DISTINCTIVE DECORATIVE DESIGNER PROFILES FOR HETTICH DRAWER SYSTEMSHettich’s new designer profiles for ArciTech and InnoTech Atira drawers provide a particularly effective way of individualising furniture. The decorative, self-adhesive designer profiles in attractive finishes create visual highlights with an individual touch: timeless stainless steel, chrome or aluminium looks. Oak and walnut pick up on the trend towards more natural authenticity. Easy to install, these profiles can also be added at a later date. The production process is in no way affected. Individual customer preferences can be met quickly and in a variety of ways.

Hettich AustraliaStand 4311Phone 1800 687 789


THE EXHIBITION

SENSYS HINGE IN OBSIDIAN BLACK – CONSPICUOUSLY INCONSPICUOUS The Sensys hinge from Hettich combines perfect design with a feel of luxury. Sensys in obsidian black retreats into the background on dark materials, remaining conspicuously inconspicuous. The range provides a key to upgrading into the luxury segment and gives manufacturers new options for differentiating. Dark timbers, warm colours and exquisite surfaces are right on trend in the luxury segment. More and more cabinet fronts are featuring dark wood materials. This trend towards natural authenticity and harmony comes from a rediscovery of the home that promises a sense of well-being and security.


MAKE REPAIRS QUICKER AND EASIER WITHOUT COMPROMISING DURABILITY Introducing the Mohawk Permafill™ wood repair system, the durable, easy-to-use solution for wood repairs. Any wood or laminate can be repaired with the Permafill system. Permafill works on stained, painted and natural wood and laminates, as well as other surfaces. The simple 3-step process allows users to repair deep scratches and gouges in seconds. No messy putties, sanding, or additional tools are required.

Multimaster AustraliaStand 4107Phone 02 8536 9000

FURNITURE FITTINGS AND SERVICES - THE TOTAL SUPPORT PACKAGE BY BLUMBlum’s total support package helps the industry meet the ever-increasing challenges relating to the manufacturing of high quality furniture, as quickly and efficiently as possible. That is why Blum offers more than just well-thought-out fittings. The company offers comprehensive services that go beyond individual Blum products - in other words, Blum provides all-inclusive support to make life easier. Manufacturers and installers can ensure that they have access to up-to-date information whenever they need it with many of Blum’s services available online and around the clock. Find out more about the latest digital services available on the Blum stand at AWISA 2018.

Blum Australia Pty LtdStand 4427Phone 1800 179 186

ABOUT ARCHETYPE INTERNATIONALArchetype international is a market leader in the joinery outsourcing industry. The company specialises in the joinery / interior and fit out industries, supplying stunning joinery shop drawings - 3D renders - submission drawings - estimation and dedicated drawing staff that work directly for clients. One of the most diverse and fastest growing joinery outsourcing companies in the country. Archetype aims to give customers the best in joinery support services that are relevant to customers’ evolving needs and lifestyle.

Archetype InternationalStand 4631Phone 0436 488 310


THE EXHIBITION

INNOVATIVE LED LUMINAIRES FROM DOMUS LINEDomus Line is an Italian company that specialises in the designing and production of high-quality lighting devices and control devices for the furniture industry. Domus Line offers trendsetting LED luminaires and accessories that are innovative for their design, colors, function and application. Domus Line is also an expert in high-quality striplighting, and specialises in smart solutions for easy mounting lighting products. Domus Line is partnered with Furnware Dorset and Fit New Zealand, to offer its innovating LED luminaires to the Australian and New Zealand markets.

Domus LineStand 4229Phone 0407 849 000

POLYTEC’S NEWEST INNOVATION –XENOLITHXenolith is a 15mm premium coloured core high pressure laminate, available for both vertical and horizontal applications. The unique coloured core allows for exposed ends with no join lines caused by a laminated edge, matching the colour of choice. Xenolith is available in 3660mm x 1830mm full sheets, made-to-order benchtops with the colour options of Calacutta D’oro, Calacutta grey and grey cement.

PolytecStand 4409Phone 1300 300 547

EVERYTHING FOR SURFACE DEFECTS AND REPAIRSNow manufacturers and installers can repair holes, chips, damaged edges, scratches in timber surface, tiles, porcelain, Caesarstone, marble, sanitary ceramics, and still matching matt to high gloss finishes. König Australia’s products are used for repairing surfaces made from wood, plastic, stone and metal. The company distributes high-quality products bearing the ‘Made in Germany’ seal of quality. The product range comprises diverse fillers, touch-up materials, pens, pigments and dyes up to spray lacquers to maintenance and cleaning products.

König Australia Stand 4630Phone 02 9440 3357

THE NEXT GENERATION IN MATT DECORATIVE SURFACES AND PANELSFenix NTA - an empowered metal surface with all the main Fenix features: resistance to scratches, thermo healing, anti-fingerprint, soft touch and extremely matt.Fenix NTA is suitable for horizontal and vertical applications and available in 0.7mm, 1.2mm, 17.9mm & 13mm Compact.This new smart material for interior design is easy to machine with standard tooling and also available as complete cut and edged panels in both 17.9mm MRMDF and 13mm Compact.

NoverStand 4401Phone 1300 668 371

TENSORGRIP – A ‘MUST SEE’ FOR AWISA VISITORSTensorGrip will be demonstrating the process of testing adhesives at AWISA. Visitors will experience the entire testing process and judge the strength of adhesives on the shear strength-testing machine. The Quin Global R & D Team will also be on the stand, and ready to assist any visitor searching for an adhesive not available on the market. Furthermore, TensorGrip canister adhesives will be on demonstration, with free samples available to visitors.

TensorGripStand 4706Phone 02 6175 0574


THE EXHIBITION

EXCEPTIONAL FINISHES AND FEATURESSince it’s commencement in 1980, Tesrol has been at the forefront of innovative design and custom finishes. The company’s pride in workmanship, and unique concepts have seen its vacuum formed, polyurethane, PureGloss and Likewood range contribute to unprecedented success and national growth. Boosted further by the inception of its brand new decorative board products, all featuring matching HPL-Infinite and Superclean Anti-fingerprint. Tesrol has evolved from a simple door manufacturer to being at the forefront of architectural and interior design finishes and joinery products.

TesrolStand 4501Phone 1300 837 765

VISIT THE FIAA STAND FOR COFFEE AND ADVICEFIAA will be at AWISA and looks forward to catching up with the industry over a free coffee and chat. FIAA membership provides unlimited workplace advice. For further information on FIAA services come and meet the FIAA workplace advice team and workplace trainers and assessors.Find out more about free industry training through the ISMAA mentoring program for apprentices & trainees, assisting them in working towards completion of their trade training.

FIAA - Furnishing Industry Association of AustraliaStand 4713Phone 02 4340 2000

SURTECO’S NEW DESIGNS AND SURFACE FINISHESThe SURface TEchnology COmpany is excited to introduce new designs and surface finishes to the Australian market at this year’s AWISA show. Designs and super matt surface finishes for finish foil, melamine, HPL and vinyl and edgeband surfaces. With its local state of the art edgeband and technical profile production in Sydney and subsidiaries in Brisbane, Melbourne and Perth, Surteco is the perfect partner for the local woodworking industry. Amongst others, Surteco will present products that won the pro-K Award in Germany.

SurtecoStand 4212Phone 02 9421 0300

PREMIUM COATINGS FROM ZOBELZobel premium coatings for timber and PVC are manufactured in Germany. The products are water based and environmentally friendly with a low VOC content. They are UV stabilised and particularly suited for use in Australia. Zobel products are optimised for process-based applicators, meaning the application can be by dipping, flow coating, roller coating or spraying at a low cost per lineal or square metre.

Zobel AustraliaStand 4720Phone 1300 073 074

CONTEMPORARY DESIGN IN CHROME WIRE WARETaking a step away from the traditional chrome wire ware look is the new Materia range from Sige. Materia takes a selection of the most popular Sige products and completely redesigns the traditional style to provide a modern contemporary feel with extremely clean lines and finishes not traditionally seen in kitchen storage solutions. Expanding on the Materia range is Materia Evo, offering the same Materia design complemented with glass inserts for an even more stylish look and feel.



THE EXHIBITION

THE COMPLETE HÄFELE - FURNITURE FITTINGSHäfele is now proud to bring its valued partners its extensive collection of furniture fittings from around the world, gathered into the latest edition of The Complete Häfele - Furniture Fittings. In a follow-up to its earlier release of The Complete Häfele - Architectural Hardware, customers now have access to over 13,900 products available from Häfele Australia.In addition to printed copies of the catalogues, the Häfele online experience has been expanded to keep up with the fast pace of every needs and requirements. Häfele knows that up to date information 24 hours a day is needed, that customers need live chat for immediate assistance, that they need to know the CAD details of that certain product and want to know what has been ordered in the past to speed up the ordering process. All this and more can be done with the ever-improving Häfele online platforms.Häfele will continue to invest in product innovation and development to ensure customers are always up to date with world trends and the latest technology available.To order a copy of the Furniture Fittings or Architectural Hardware catalogues visit www.hafele.com.au or find Häfele at stand 4511. MX DRAWER SYSTEMS

Häfele can now bring the MX drawer system to help make the most of space in a kitchen. MX drawers are engineered by Häfele to bring life to the kitchen through the smooth, elegant movements of the soft-close runners.In addition to this there are several attractive side options from rails to glass inserts as well as many other high-end features to make drawers extraordinary. At stand 4511.

LOOX/SMART HÄFELEHomes should be as intuitive as their owners; now, with the Smart Häfele range they can be. Across the entire Smart range Häfele has engineered bathroom mirrors, sound and lighting systems to give control of the home through smart phones using the Häfele Connect app.The Loox multi-dimensional bathroom mirror has been designed to integrate seamlessly into life with four key functions at the touch of a button. With front and back lighting, an integrated sound system and a mirror demister all controlled via the phone, what more could a home owner want?As the home owner moves into the living room the Häfele Connect mobile app automatically connects to the sound system in the cabinetry and lighting around the room. This allows the home owner to change and adjust the lighting as well as keep playing music from the phone throughout the home. Through a simple interface and with the touch of a button, a home can come to life in the hands of the owner. Visit Häfele’s Smart Room display for more.

Häfele Australia Pty LtdStand 4511Phone 1300 659 728

KESSEBOHMER CLEVER STORAGE - ANTHRACITEHäfele is proudly partnered with Kesseböhmer to bring the very latest products in their range directly from Germany. Kesseböhmer is the master of clever storage, bringing better pantry solutions such as the well-loved Tandem pantry. Häfele and Kesseböhmer are now able to bring all their favourite Clever Storage products in the all-new Anthracite colour range to bring bolder colour and shade choices to homes and kitchens. Anthracite pairs perfectly with all colour palettes to bring a subtle but rich dark finish. Taking inspiration from natural materials, the Kesseböhmer Anthracite range will bring a more sophisticated finish to the kitchen than a traditional black finish.Find out more about Kesseböhmer at stand 4615.

FREE FLAP FAMILYFree Flap is a hingeless stay flap fitting for all of the most common cabinet heights and flap weight combinations. The Free Flap stay flap fitting is in touch with the latest trends with regard to compactness and design. The fittings impress with their ease of operation. During development, Häfele placed a considerable amount of importance on having a slimline and minimalist design in order to create more space in the cabinet, and having an attractive appearance as a result. Thanks to the multi-position function, which can be perfectly adjusted using the force adjusting facility, Free Flap holds the flap in every position. The integrated finely-tuned soft closing system provides operating convenience. At stand 4511.


THE EXHIBITION

HARDWARE FOR BI-FOLDING CABINET POCKET DOORS UP TO 25KG PER DOOR Flush cabinet fronts can be fully opened with Hawa-Folding Concepta 25. Two doors can be folded and slid into furniture cabinets or wall niches at either the side. Systems with one pair of folding doors at both sides can be realized without separating walls using the optional reinforcement profile. Sets with a track length of 2120 mm also make 3-door cabinet fronts possible in combination with Hawa-Concepta

Hawa Sliding Solutions AGStand 4709Phone +41 44 787 1717

THE SLEEK NEW TEKFORM SLIMLINE DRAWERThe new Tekform Slimline drawer offers sleek sides and intuitive installation with Easy-fix front panel connectors and consumer preferred integrated ‘ConfidentClose’ damping. The Slimline drawer doesn’t require any galley rails or side extensions for deep drawers, so not only does it look better, but fewer parts means it’s also easier to install. With the same drilling as the Tekform drawer and no rebating required, the Slimline drawer is easily interchangeable for added flexibility.


HETTICH’S NEW GENERATION OF PUSH TO OPEN SILENT TECHNOLOGY As a pioneer of push to open Silent technology, Hettich has added numerous new features to the second product generation. With push to open Silent, drawers are incredibly easy to open without handles, gently and quietly closing again from just a slight turn of the wrist. Instead of springing back, push to open Silent stores energy and assists the closing cycle as the drawer slowly glides in. With optional synchronisation, the system can be activated from the edges of large drawer. With optional 10 kg runners, light drawers can be closed just as easily as heavy weight drawers up to 80 kg.


OLIVERI FOR SUPERIOR QUALITY SINKSThe company began its life as a domestic metal fabricator in Adelaide in 1947. A move to sink manufacturing saw them pioneer the deep drawing process in Australia. Today, Oliveri is Australia’s only mass commercial sink manufacturer. The quality style and superior design of Oliveri sinks is now enjoyed by home owners around the world as the brand has become established in many overseas markets. Oliveri also distributes an extensive quality tap range, water filtration systems and Quantum Solar Heat Pumps.

OliveriStand 4118Phone 1300 137 465

TALKING COLOUR WITH DULUX COLOUR EXPERT ANDREA LUCENA-ORRFor more than a little inspiration and a preview of what’s to come, Dulux colour expert Andrea Lucena-Orr will be at the Lincoln Sentry stand guiding visitors through this year’s colour forecast.Great functional design, fun accessories and glorious colour go hand in hand at this year’s stand. Listen to Andrea’s tips and tricks as she shares what’s coming straight out of Europe’s hottest design and trade shows. This is one presentation not to miss.

Lincoln SentryStand 4223 Phone 1300 551 919


THE EXHIBITION

BRIGGS VENEERS, THE VENEER SPECIALISTBriggs Veneers offers Australia’s largest range of reconstituted, dyed ad real wood veneers, and prefinished veneers. Combined with Flameblock fire retardant MDF, Briggs’ veneers are fully certified to reach Fire Hazard Group 2 (and Group 1 for some species). Featured is the ceiling of the Sydney International Convention Centre: Hoop Pine veneer on Flameblock.

Briggs Veneers Pty LtdStand 4124Phone 02 9732 7888

SLIDELINE M 2-TRACK SYSTEM FOR GREATER FUNCTIONALLITYSlideLine M’s finely engineered components ensure fitted doors are silent, effortless to use and elegant, with narrow reveals and handle-less, flush-fitted front panels that match uncluttered interiors. The bottom running system offers the option of a one-track overlay or two-track inset profile suitable for wooden, glass or aluminium-framed doors weighing up to 30kg. Two doors can cross each other in just one profile. Runners can be pressed, screwed or glued to the fitted carcass. No special tools are required. Installation is simple since it’s carried out from the front, not the sides.


MOVING WITH THE TIMESIn line with its evolving product offer Nover thought it was time to adopt a new modern logo.AWISA 2018 will be the platform to launch and showcase the new look, the new 2018 catalogue and many new exclusive products. Nover will be showcasing Luxe and Syncron panels, the complete Fenix NTM range of 19 colours, the new Krome Linea drawer offer as well as new editions to the Platinum offer along with exciting new products from Hideaway.

NoverStand 4401Phone 1300 668 371

FOR PROVEN QUALITY, IT HAS TO BE THE ORIGINALQuality is a fundamental and inherent purpose within Blum. To be the best that the company can be for all stakeholders that choose to partner with Blum. Blum is committed to maintaining and creating the highest standard of quality across everything that it does. Blum holds itself to not only industry standards but surpasses these to protect the true measurement of quality and trust that business partners show in the company by allowing Blum products and services into their businesses and homes.Experience the difference of original Blum quality at the Blum stand.


TAKE A WELL-EARNED BREATHER AND ENJOY A COFFEENo one does coffee quite like the Italians and no one does designer storage accessories quite like Gollinucci. Exclusive to Linclon Sentry, Gollinucci is an Italian based company that designs and manufactures quality accessories for the bathroom, kitchen and laundry. The show will be bigger and better than ever, so visitors should pace themselves and be sure to drop in for a coffee and a chat to the Lincoln Sentry team.

Lincoln SentryStand 4327Phone 1300 551 919


THE EXHIBITION

A SEAMLESS SOLUTION: THE MKU-1000 FLUSH SLIDING DOOR SYSTEMThis unique sliding door system allows the door to function with a smooth, steady, and gentle operation that delivers the door to sit flush with adjacent walls when closed. With the door flush against the adjacent walls, it can be incorporated into decorative panels and almost completely hidden - making the end result seamless in look and feel. Sugatsune has been delivering quality hardware for over 85 years and is now available from Lincoln Sentry.

Lincoln SentryStands 4223 & 4327Phone 1300 551 919

ON TREND KNOBS AND HANDLES FROM KETHYLeading the way with design, Kethy’s new range of knobs and handles feature the ‘on trend’ finishes of blacks, white, greys and timber. With many products beautifully finished in Europe, choosing a Kethy handle is choosing designs that enhance.

Greg Steele Trading Pty LtdStand 4309Phone 02 9542 4991

CORNERSTONE MAXX – EXCELLENT DESIGN BY VAUTH-SAGELVauth-Sagel has stood for contemporary and innovative storage space solutions for over 55 years. The owner-managed family business develops, manufactures and sells system components for the kitchen and furniture industry that are aimed at making people’s lives more comfortable.With the totally innovative Cornerstone Maxx, Vauth-Sagel is setting new benchmarks in the market, as proven by the recent win of the German Design Award 2018. The revolutionary corner unit and many other products will be on display at AWISA 2018.

Vauth-SagelStand 4233Phone 0431 971 983

THE ULTIMATE MATTE FINISH WITH FLAWLESS APPEALIntroducing new Laminex AbsoluteMatte. For the definitive matte finish that is like velvet to the touch. A genuine advancement in design, the unique fingerprint resistant technology gives a lasting visual impact that has not been seen or felt before in a laminate. View the full colour range and order a sample today at laminex.com.au.

Laminex AustraliaStand 4301Phone 132 136

HIDEAWAY BINS TO REVEAL ALLHideaway Bins focus on innovation. This is the reason the company has been a market leader in storage solutions since 2006. Hideaway Bins was first to market with the top mount Hideaway laundry hamper in 2013, and then again in 2015 with the base mount laundry hamper. At AWISA 2018, Hideaway Bins will redefine what to expect from waste bins when its all new range of bins is revealed.

Hideaway BinsStand 4622Phone 1800 042 642


THE EXHIBITION

NEW RANGE OF MATT COLOURS WITH ANTI-FINGERPRINTAdd a touch of charm to any interior with the NX range by Urban Republic. With over 125 stunning colours to choose from, the wide selection of high-quality decorative panels have been handpicked to meet the Australian demand.The NX Supermatt+2 is the newest range of matt colours in the collection that introduces the latest technology of anti-fingerprint. The low-light reflection appears to be growing in popularity and will leave a timeless impression for many years to come.

Urban RepublicStand 4202Phone 03 9357 0934

DMK – PREMIUM PLYWOOD AND PANEL PEOPLE DMK Forest Products is entering its 36th year of representing the plywood division of UPM-Kymmene Oy of Finland. DMK believes that UPM manufacture the world’s best plywood. Since 1972, DMK has identified premium plywood products that provide a superior finish for many applications such as shopfitting, kitchen joinery and the display industry. DMK also will be showcasing DMK Manufacturing. This division of DMK is growing rapidly and is fast gaining recognition within the industry.

DMK Forest ProductsStand 4101Phone 02 9938 4166

WEATHERED OAK – A MODERN STATEMENT IN DESIGN INNOVATIONFarmers sets a striking new direction for classic kitchens. By combining a textured façade with sleek minimalist lines, these new interpretations will appeal to those with an eye for detail and an appreciation of future-focused design. The Weathered Oak range is available in a shaker or slab profile and can be done in a weathered, natural or rougher cut finish.

Farmers is now available exclusively through Lincoln Sentry. For more information, contact Lincoln Sentry Customer Service on 1300 551 919 or Farmers on 1300 725 151.


BRINGING DESIGNS TO LIFELet clients feel their designs come to life. Make sure that designs inspire clients to want to turn their dreams into reality. Whether a user needs to provide high-quality renders or even begin to showcase their designs in a virtual walk-through, the team at Planit will be able to show how to win more jobs. Navigate through the design with virtual walk throughs, change colour and material selections in real-time and see the effect of true light reflections, all to enhance a customer’s experience from design through to completion. Make a statement using the latest in virtual reality, that’s easy to use, easy to understand and on the cutting edge of software.

Planit Cutting Edge SolutionsStand 4601Phone: 1300 855 411

AWARD WINNING WINGLINE L FOLDING SYSTEM – RED DOT 2018The best of German design and engineering in storage solutions is now available in Australia with Hettich’s WingLine range of folding sliding door systems for wardrobes and cupboards. Designed to pair with Hettich’s Sensys soft-closing hinges, WingLine L clever push/pull opening mechanism provides ready access to everything inside the cabinet. It offers minimal protrusion, aesthetic appeal and precision engineering tested over 40,000 cycles. WingLine L opens an entire door set with just one push or pull – with or without handle. Supporting a door panel in heights of up to 2400 mm and widths of up to 600 mm.



THE EXHIBITION

RITMA CUBE BY HARNRitma Cube by Harn has clean square lines that combine elegance and fashion for the future of discerning homeowners.Three standard heights together with a range of railings and accessories complete the comprehensive program. Ritma Cube is available in various load capacities to suit different storage requirements. Synchronised runners with low friction roller bearing offer smooth and quiet sliding performance on full load.

HarnStand 4120Phone 0404 459 159

STEFANO ORLATI CAPRI PROFILE HANDLESWith Capri handleless profiles from Stefano Orlati, cabinet makers can now create a European-style kitchen that blends sophisticated style with high functionality. For a streamlined look, Capri profiles deliver handleless solutions for base, wall and tower cabinets. All six profiles are made of recyclable high quality anodised aluminium and are available in a selection of on-trend finishes. Plus, add a touch of luxury with the Capri-C LED profile for an integrated LED lighting solution.


CABINET MAKERS INSURANCE BROKERS CMIB is a specialist insurance broker, dealing solely with businesses associated within the cabinet making, shop fitting, joinery, stair, window and door industries Australia wide.The broker has developed the most comprehensive products and premiums and is well positioned to provide expert advice and service.Its suite of products ensure that businesses are well protected against the unexpected and provide peace of mind.

Cabinet Makers Insurance BrokersStand 4106Phone 03 9797 2903

POP UP WITH POINT PODWith Point Pod, cabinetmakers and kitchen manufacturers can now provide access to power points and USB sockets without compromising their designs. It’s a pop-up power outlet hidden within the stone or timber bench top. Using an electric lift, the user simply presses the top of the unit, and it emerges for use on the bench top.

Point PodStand 4632Phone 07 3040 8280

WASHROOM PARTITIONING - FULL RANGE ON DISPLAY Those that have ever received plans for a commercial job with washroom joinery and thought ‘it’s too hard’ should make sure they visit the Lincoln Sentry stand.The team can now offer a complete quoting service on washroom joinery allowing manufacturers to add more value to their commercial quotes. Come see the full range of washroom joinery options at the TPI display on the Lincoln Sentry stand at AWISA 2018.



THE EXHIBITION

PRACTICAL SUPPLIER DEMONSTRATIONS TO SAVE TIME AND MONEYWhen visitors come to the Lincoln Sentry stand at AWISA they should make sure to head to the Tradie Zone to see demonstrations of the latest tools and products that are designed to save time and money on every job that’s done. Demonstrations from Lamello, Sheffield Blades, Hera and DecoSplash will help visitors get the job done faster and better.


MEGANITE’S SOLID SURFACE SOLUTIONSDistribution opportunities available. Make an appointment with Meganite® at [email protected] and become a premium partner with Meganite, a trusted solid surface solution provider since 1976. Meganite - US-based award winning acrylic solid surface, first showcase in the region with all new marble-like Carrara design and trend-setting color series. Trusted by global leading brands, Meganite is a most trusted solid surface solution provider with size and color customisation options that fit perfectly into all design needs.

MeganiteStand 4201www.meganite.com

CORIAN®, CASF TIMBER AND WASHPLANES - UNLIMITED DESIGN POTENTIALDIscover a world of unlimited design and colour potential with Corian - a solid surface material renowned for exceptional versatility, beauty and almost limitless applications. Likewise timeless in its appeal, responsibly sourced and resilient, hardwood CASF Timber™ - offering both a superior lifespan and unique composition technology. Also exhibited, the highly sought after new collection of all in one Corian® washplanes designed with the revolutionary Dyson Airblade™ Tap.

Casf Australia Pty LtdStand 4111Phone 1300 795 044

STYLELITE FOR HIGH GLOSS CABINET FACINGEGR Decor is home to the leading class, high gloss cabinet facing solution - StyleLite. At AWISA 2018, EGR Decor will showcase its exciting new range of products suitable for outdoor and indoor residential and commercial environments. The range includes textured and smooth finishes to suit every application from walls to doors, bathrooms, kitchens and everything in between. EGR Decor’s range of solutions is an economical and easy to use option for a kitchen, wardrobe or joinery project.

EGRStand 4102Phone 07 3718 1100

SUPPLIER WOODWORKING MAGAZINESupplier Woodworking magazine and its sister publications Discovering Stone and Finishes & Surfaces magazine will be freely available to all AWISA visitors from the Elite Publishing stand. See the specialty B2B titles that are essential to everyday business activities.

Elite PublishingStand 470503 9890 0815


THE EXHIBITION

INSPIRE CREATE DESIGN For the past eight years Flexipanel has strived to become an industry leading manufacturer of innovative and creative melamine solutions. As a locally made, family owned business, the company endeavours to meet the ever changing needs of the cabinetmaking industry. With this goal in mind FlexiPanel will be showcasing an exciting new variety of colours along with two additional finishes at AWISA 2018.

FlexipanelStand 4603Phone 1300 723 125

THE NEWEST STATEMENT PIECE IN DOOR PROFILESThe Avellino door profile from polytec is a multi-piece door consisting of two vertical side rails and a horizontal centre panel, bringing a contemporary spin on the traditional European-style door with contrasting timber-grain direction. Available in 14 Woodmatt colours, the Avellino door is the newest statement piece in polytec’s range of door profiles.


ELEGANT, PRACTICAL AND VERSATILEColourpyne® from Carter Holt Harvey is a tough, scratch resistant range of melamine board (HMR particleboard and MR MDF) that has for many years been well suited to and widely used for doors, panels and shelves in any interior joinery application, where a practical and durable decorative surface has been the desired outcome.The range has been enhanced by the addition of 4 new solid colours and 3 woodgrain designs. These new designs broaden the scope and opportunity even further for an individually unique joinery colour selection that will add an attractive feature to any new home or renovation.

Carter Holt Harvey Woodproducts AustraliaStand 4610Phone 1300 658 828

FIRST SUPER – THE INDUSTRY SUPER FUNDFirst Super is the industry superannuation fund for everyone in the furniture, joinery and timber industries. First Super is here to help take the hassle out of superannuation and create happy retirements. First Super can help find lost super and roll it into a single account, saving time and money.

First SuperStand 4713Phone 1300 360 988

HIGH QUALITY WASTE BIN SOLUTIONSWilson & Bradley is proud to be distributors of high quality waste bin solutions from leading manufacturers, Wesco and Sige. Wesco, founded in 1867, prides itself on providing innovative and functional solutions for a wide range of kitchen requirements. Designed exclusively for the Australian market is the Orion Grey range of waste bins from Sige. Available in a range of bucket sizes and to suit a range of cabinet sizes, there is a bin to suit the smallest of kitchens to the largest of families.



THE EXHIBITION

NEW VIVID DOORS FROM PRECISE PRECUTPrecise Precut be showcasing its new Vivid door range utilising StyleLite acrylic boards which are offered in Fusion/Laser square edge and Precise Precut’s new seamless 30 degree Shark finger pull profile. Also on display will be CNC profiled doors ready for 2 pac.Also on show will be Precise Precut’s online ordering program ‘Modular Pro’ with which cabinetmakers can quote and order the Vivid door range online 24/7. Visitors will be able to drive ‘Modular Pro’ so they can see how easy it is to use.

Precise PrecutStand 4704Phone 07 5574 5266

HIGH QUALITY PULL OUT BINSTanova by Fit: a high quality range of pull out kitchen bins, laundry baskets and ventilated drawers, developed in partnership with kitchen makers, cabinet makers and designers.These units slide away out of sight, yet are easily accessed when needed, enhancing living spaces and work flow. With a multitude of options when it comes to specs and configurations, there’s a model for every budget and application. At AWISA, Fit launches Bokashi by Tanova, an innovative pull out kitchen composting solution.

FitStand 4127Phone +64 9 972 1753

REDISCOVER SIMPLICITYRequirements for individuality and a wide range of design possibilities are becoming an increasingly important consideration for high-end furniture today. Blum continuously look for ways to broaden the range of possibilities for implementing trends in furniture manufacturing; it is important to Blum that customers are supported during the manufacturing process in the most simple and convenient way. Blum does this by developing technically sophisticated product innovations that make it easier for ideas to become reality. Rediscover simplicity on the Blum stand at AWISA 2018.


QUALITY ITALIAN MADE TIMBER COATINGSPaint Holdings is the Australian distributor for the highest quality Italian timber coatings. Verinlegno, located near Florence, has been manufacturing solvent based timber coatings for furniture and commercial applications for over 50 years. Vernites are in Milan and have for the past 25 years been manufacturing solely water-based timber coatings for both interior and exterior applications. Vernites products have been developed to compete strongly against solvent-based coatings while meeting the safe environmental needs of today.Both companies produce coatings at the forefront of current technology to provide the best possible durability and aesthetic appearance for timber.

Paint Holdings Pty LtdStand 4213Phone 0414 589 987


THE EXHIBITION

THE ALL NEW ICC SYDNEY EXHIBITION CENTRE, HOME TO AWISA 2018AWISA 2018 takes place in the exciting new multi-level ICC Sydney Exhibition Centre, built on the same site as the previous exhibition centre at Darling Harbour. Still just as close to Sydney’s CBD with its huge range of hotels, restaurants, bars and shopping.AWISA Wood & Panel Processing is on Level 1 and AWISA-Design is on the exhibition floor immediately above.

AWISA 2018Phone 02 4861 7040www.awisa.com

CAD SOFTWARE OF CHOICEPytha 3D CAD is the software of choice for custom joinery, shopfitting, and kitchen and bathroom design and manufacturing. It allows users to plan and model any design, make construction drawings, give photorealistic presentations and manufacture seamlessly; impressing clients, saving time, and saving on manufacturing. Visit Pytha Partners at AWISA 2018 to see the latest in libraries, online learning and virtual-reality 3D design.

Pytha Partners AustraliaStand 1508 and 4602Phone 02 8515 0285

SLIDING DOOR SYSTEMS BY OPIKEAvailable exclusively at Wilson & Bradley is the new range of sliding door systems from specialist sliding door hardware manufacturer Opike.Offering exceptional quality and design, the Opike range is suitable for wooden doors and features top hung, inline and bi-fold sliding door systems to suit varying door thickness and weights, with some solutions offering two-way damping (soft open/soft close) for both two and three door applications.


AUSTRALIAN-MADE ANTI-FINGERPRINT TECHNOLOGYThe newest innovation in polytec’s decorative doors and panels promises an unrivalled anti-fingerprint technology in the purest matt form. The silky smooth finish of Venette creates an inviting and pleasant touch experience, while the pure matt surface assures low light reflection, reducing the need for constant care and cleaning. Venette’s advanced surface technology creates a soft appeal, and invites users to explore the surface without the danger of fingerprints.



THE EXHIBITION

AWISA 2018 4-7 July 2018

ICC Sydney Exhibition CentreDarling Harbour Sydney

SHOW HOURS

Wednesday 4 July 2018 9.00a.m. - 6.00p.m.

Thursday 5 July 2018 9.00a.m. - 6.00p.m.

Friday 6 July 2018 9.00a.m. - 6.00p.m.

Saturday 7 July 2018 9.00a.m. - 4.00p.m.

ADMISSION AND REGISTRATION

Admission is free. AWISA 2018 is a trade-only exhibition. All visitors are asked to register. Visitors can register at the counters in the foyer prior to admission, but is it preferred that they pre-register. Pre-registrations can only be made through the AWISA website, www.awisa.com/visitors.

ACCOMMODATION AND AFTER HOURS

There are over 50 hotels within two kilometres of the venue - in the Darling Harbour and Pyrmont area adjacent to ICC Sydney, and in the Sydney CBD. Special rates have been negotiated at a number of these hotels. Visitors are recommended to book early as this will give them a greater choice of room and hotel.

The Lido Group has been appointed to handle visitors’ accommodation. To book visit www.awisa.com/hotels. For air travel contact your favourite airline or travel agent.

AIRPORT SHUTTLE BUSES

A fleet of 48 seat coaches will provide a complimentary shuttle service between the two domestic terminals and AWISA 2018, with the service running every half hour from 8.00am each show day, with the last service leaving the exhibition one hour after the close of the show each day.

On arrival at Sydney airport go to the baggage claim area in either domestic terminal and look for the bus company representative with the AWISA sign, or go to the Qantas group coach bays to the east of the Qantas terminal, T3. Qantas passengers should exit the Qantas terminal ground floor and turn left. Virgin, Jetstar and other T2 passengers

should exit the T2 terminal ground floor, walk along the pedestrian footpath through the ground floor of the car park to the Qantas terminal, then head right to the Qantas group coach bays. Look for the bus with the AWISA sign. International visitors can connect to the AWISA shuttle by taking the airport shuttle to the domestic terminals.

At the venue the passenger drop-off and pick-up point will be at the bus stop in Iron Wharf Place, north end of ICC Sydney Convention centre, near Sofitel Sydney Darling Harbour.

LUGGAGE ROOM

Luggage can be left during the day at the AWISA luggage room. Items are stored at the owners’ risk.

CAR PARKING AND PUBLIC TRANSPORT

The venue car park is located underneath the exhibition halls, access off Darling Drive. For more details car park and public transport options visit: https://www.iccsydney.com.au/visit-icc-sydney/getting-to-icc-sydney

SAFETY AND CHILDREN

AWISA 2018 is a workplace with woodworking machinery on display and in operation. In the interest of safety, children over 6 months of age and under 15 years of age will not be admitted to the exhibition. AWISA prefers that children are not even brought to the venue. However, a professionally run children’s hospitality suite is provided, with activities and entertainment to suit the various age groups being looked after. Space is available on a first-come first-served basis. Bookings are not accepted. By registering to visit, show visitors accept that the final decision about entry of children who appear to be under age will be made by the show managers.

AWISA 2018 IS ORGANISED BY THE AUSTRALIAN WOODWORKING INDUSTRY SUPPLIERS ASSOCIATION LIMITED.

T: 02 4861 7040E: [email protected]

www.awisa.com

Documents

Technology and design for joinery and cabinetry. Design Preview.pdfanyone involved in the design, specification, manufacture or installation of domestic and commercial fit-outs. In