72
DORMA Technical manual for ordering and installation MANET Single-point fixings for interior applications

Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

  • Upload
    others

  • View
    9

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

DORMA

Technical manualfor orderingand installation

MANETSingle-point fixingsfor interior applications

Page 2: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem
Page 3: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Product discription4 – 5

MANETCONCEPT6 – 37

MANETCOMPACT Sets38 – 49

MANETAMBIENT50 – 65

Installation tools /Accessories

66 – 70

Page 4: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

4 10/07

DORMA MANET Glass design system

Today’s approach to officedesign tends to be generouslyappointed, open-plan layouts.One of the basic underlyingprinciples in this regard isthat, in order to be effectivein business, you need a clearview of everything that ishappening.Consequently, flexible glasspartitions and doors are be-coming the preferred solutionfor internal spatial division.Thanks to the flexible modu-larity of the system, DORMAMANET offers architects andspecifiers a free hand increative almost bespokedesign with space, visionand light as a foundation.The basic component is thesingle-point fixing which iscountersunk into the glassand provides for a perfectlyflush finish in all applications.In addition to the counter-sunk version, however, thesystem now also offers a new

alternative, i.e. whereby thesingle-point fixing is clam-ped to the glass surface.When using these mountingelements, glazing systems of8 mm thickness as well asthe usual 10 and 12 mmthicknesses are available asstandard applications forsliding doors. Other glassthicknesses may also beavailable, and the installati-on of timber doors is like-wise possible. Design modi-fications enable the freecombination of various rollercarrier and track rail types.Further details can be foundin the relevant introductorypages.Adjustable angle connectorsprovide for reliable attach-ment to existing structuralcomponents or glass-to-glasscombinations, with integra-ted pivoting and sliding doorelements complimenting thesystem.

Just as visually effective arethe MANET COMPACT stan-dardised sets from theDORMA MANET family.These facilitate single, fastplanning of the more popu-lar system types with 8, 10or 12 mm glass for doorsand 10 and 12 mm glass foroverpanels and sidelights.The MANET COMPACT sli-ding door sets will be deli-vered with roller carrier inCLASSIC design.

Optional accessories areavailable for increaseddesign variety within theindividual sets.

The system componentscome with numerous adjust-ment possibilities in order toensure problem-free installa-tion of the sliding, doubleaction or single action doors.Wall abutment profiles /connectors (for attachingthe overpanel and sidelightscreens to the existingstructure) may need to beprovided.

MANET CONCEPT MANET COMPACT Sets

Page 5: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

11/06 5

All the elements includingthe pull handles are availablein an elegant stainless steelfinish (AISI 303).In applications involvingcorrosive atmospheres, manyfittings are also available instainless steel AISI 316L.

Needless to say, all DORMAsystems are protected byproprietary rights worldwide.We will be glad to provide youwith information concerningrelevant patents, e.g.PCT/EP03/04299,PCT/EP01/04255 etc. onapplication.

The remarkableMANET AMBIENT range ofhardware breathes new lifeinto furniture creations.Sliding, pivoting, retention– this system transforms thefunctional into the stylish,affording the designeralmost unlimited scope forcreativity. Exacting in termsof its concept andengineering excellence, thishardware system is quiteunique in a number ofways - not least because thestainless steel fittings arenot concealed, servinginstead to accentuate excep-tional furniture design.The MANET AMBIENTsystem approach is alsoreflected in the minimalnumber of basic compo-nents incorporated in theoverall range.

At the heart of the systemis the rod - the connectingelement that also functionsas a support, track rail orpivot. Shelf supports andsingle-point fixings(flush-mounted in the glass)are further components inthis kit system with itsunique fitting methods,application range andmodularity.MANET AMBIENT is theideal aesthetic partner notonly to glass surfaces butalso to fine wood carcassfurniture - in offices, foyers,kitchens, living rooms andbedrooms. Hardly surpri-sing, then, that this indu-strial-quality product rangeis encountered not only inthe project hardware spherebut also, increasingly, inprivate homes as well.

Awarded with the design prizered dot 2002

MANET AMBIENT

SlidingPivotingRetention

Page 6: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

DORMA MANET CONCEPT

Page 7: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Content

Single-point fixing 8

Connection system 10

Pivoting door system 14

Sliding door system 22

Pull handles/door knobs 34

MANETCONCEPT

Page 8: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

8 11/06

Threaded rod M8 withsmall head (eg DIN 6912).Length and type to suitwallplug.

3-dimensionaladjustment

1

23

Wallplug on site tosuit wall construction.

Installation and adjustment

Transfer the drillingpoints from the installationdrawing to the wall.Drill anchor holes for wallplugs.Undo adjustment fastenerand secure to the wall.Only lightly tighten fastenerso that it can still bemoved.Mount the fixing andwasher and fit the glass.Undo the adjustmentfastener and then secure infinal position.Align single-point fixingsand secure with grub screw.Fit tapered nut and clam-ping ring and tighten withspecial wrench (tighteningtorque 15 Nm).Clip on covers.

45

6

Post-installation adjustmentof ± 2 mm horizontally andvertically by rotatingthe oblong hole.

Aperture forpost-installationadjustment of screw

Adjustment screwallows offset fromwall to be altereddepending on typeof fitting.

1 Clip-on cover

2 Pin internal thread

3 Conical sleeve

4 Gasket

5 Fixing

6 Adjustment screw

Components

MANET CONCEPT Single-point fixing

The basic component withinthe MANET system is thesingle-point fixing. Ratherthan cylindrical bore in theglass, this has a taperedcountersunk bore for a perfectseated fit to the glass. Thesegive a flush finish of thesingle-point fixing in all appli-cations.The three-dimensional adjus-tability incorporated withinthe fitting ensures ideal com-pensation for structural anddrilling tolerances.Constraint-free transmissionof all the forces acting on theglass to the substructure isalso ensured.

Single-point fixing series S32/35

Page 9: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Type and ordering information

Single-point fixing,Glass/WallGlass/Wall offsetadjustable 8.5 -11.5 mm

Complete fitting

Glass thickness 10 mm:Art. No. 8.29.200.700.99

Glass thickness 12 mm:Art. No. 8.29.210.700.99

Glass thickness 13.5 mm:Art. No. 8.29.240.700.99

Glass thickness 15 mm:Art. No. 8.29.244.700.99

Glass thickness 17.5 mm:Art. No. 8.29.248.700.99

Ø32

Ø35

Single-point fixing,Glass/WallGlass/Wall offsetadjustable 11.5 -14.5 mm

Complete fitting

Glass thickness 10 mm:Art. No. 8.29.201.700.99

Glass thickness 12 mm:Art. No. 8.29.211.700.99

Glass thickness 13.5 mm:Art. No. 8.29.241.700.99

Glass thickness 15 mm:Art. No. 8.29.245.700.99

Glass thickness 17.5 mm:Art. No. 8.29.249.700.99

Single-point fixing,Glass/WallGlass/Wall offsetadjustable 14.5 - 22 mm

Complete fitting

Glass thickness 10 mm:Art. No. 8.29.202.700.99

Glass thickness 12 mm:Art. No. 8.29.212.700.99

Glass thickness 13.5 mm:Art. No. 8.29.242.700.99

Glass thickness 15 mm:Art. No. 8.29.246.700.99

Glass thickness 17.5 mm:Art. No. 8.29.250.700.99

Single-point fixing,Glass/WallGlass/Wall offset 6 mmnot adjustable

Complete fitting

Glass thickness 10 mm:Art. No. 8.29.205.700.99

Glass thickness 12 mm:Art. No. 8.29.215.700.99

Glass thickness 13.5 mm:Art. No. 8.29.243.700.99

Glass thickness 15 mm:Art. No. 8.29.247.700.99

Glass thickness 17.5 mm:Art. No. 8.29.251.700.99

adjustable

Glass-thickness

Glass-thickness

Glass-thickness8.5-11.5

Ø32

Ø35

adjustable

11.5-14.5

Ø32

Ø35

adjustable

14.5-22

Ø32

Ø35

6

notadjustable

Glass-thickness

11/06 911/06 9

Page 10: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

10 11/06

MANET CONCEPT Connection system

The system approach is verymuch in evidence in the caseof the interconnecting com-ponents. Elements such asclamping and angle connec-tors of various designs andalso interconnecting fastenersof various lengths can becombined in order to attachglass of different thicknessesat any required angle to thefloor, to ceilings, to walls andto plinth supports.Single-point fixings flushwith the glass are also usedfor this interconnection andglass-to-glass system.Tolerances are compensatedby sloted holes in the inter-connecting fasteners.

1 2

3 4

3ColumnCeiling/floor fixingArt. No. 8.21.146.700.99

4Clamping connectorGlass thickness 8 -12 mmArt. No. 8.29.149.700.99

5Connecting rod

Length 52.5 mmArt. No. 8.21.301.002.40

Length 60 mmArt. No. 8.21.301.004.40

Length 82 mmArt. No. 8.21.301.003.40

Length 103 mmArt. No. 8.21.301.005.40

103 mm

82 mm

60 mm

52.5 mm

5

Ordering information

1Pivoting glass clampGlass thickness 8-12 mmArt. No. 8.29.160.700.99

Glass thickn. 13.5-17.5 mmArt. No. 8.29.162.700.99

Glass thickn.17.5-21.5 mmArt. No. 8.29.163.700.99

2Pivoting wall fixingArt. No. 8.21.141.700.99

Connection system

Page 11: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

11/06 11

6

adjustable viaoblong hole

1 2

5

87Components and assemblyof the glass fixing

3 4

1 Clip-on cover2 Connecting bolt3 Conical collar4 Conical sleeve5 Gasket6 Pivoting clamp7 Connecting bolt8 Connecting rodto suit length

9 Connecting bolt10 Pivoting clamp11 Fixing plate

Ordering information

Complete fitting glass/glass8-12 mm glass thickness

With connecting rod52.5 mmArt. No.8.29.120.700.99

With connecting rod60 mmArt. No.8.29.122.700.99

With connecting rod82 mmArt. No. 8.29.125.700.99

With connecting rod103 mmArt. No. 8.29.130.700.99

A

A

A

Connecting rod

52.5 / 60 / 82 / 103 mm

ø20

28ø36

ø32

Glass thickness

Glassthickness

Components

Complete fittingglass /wall8-12 mm glass thickness

With connecting rod52.5mmArt. No. 8.29.139.700.99

With connecting rod60 mmArt. No. 8.29.140.700.99

With connecting rod82 mmArt. No. 8.29.142.700.99

B

C

B

B

Connecting rod52.5 / 60 / 82 mm

Connecting rodsee page 10

Connectingrodsee page 10

Components and assemblyof the wall fixing

Threaded rod M8 withsmall head(e.g. DIN 6912).Length and type to suitwallplug.

adjustable viaoblong hole

grub screw

2-dimensionaladjustment

Wallplug on site to suitwall construction.

ø20

ø36

32.5

9

10 11

8

Wall

90°-180°Glass/Wall

Glass/Glass

Connector for double panel

Glass/Wall

90°-180°Glass/Glass

C

C

120

3

Glass Glass

ø32

Complete fittingConnectorfor glass thickness8 -12 mm

AISI 303Art. No. 8.29.148.700.99

AISI 316LArt. No. 8.29.368.700.99

Glass thickness

Connection system

Page 12: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

12 11/06

MANET CONCEPT Connection system

Ordering information

AClamping connector

Complete fittingGlass thickness 8 -12 mmArt. No. 8.29.149.700.99

BCorner connector 90°Glass/ceiling, Glass/floorconnection

Complete fittingGlass thickness 8 -12 mm(only supporting function)Art. No. 8.29.145.700.99

CCeiling fixing(bearing function)

Complete fittingGlass thickness 8 -12 mmcountersunkArt. No. 8.29.337.700.99

clamping discArt. No. 8.29.338.700.99

1Connecting bolt

2Pivoting clamp

3Connecting bolt

4Gasket

5Pivoting clamp

6Fixing plate

7Column

A

A

B

B

C

C

28 28

ø36

ø20

Components / Installation

adjustable viaoblong hole

1 2

3 4

4 5

Connecting rodor steel cable

6

7

2-dimensionaladjustment

Grub screw

Hanging glass fromthe ceiling is permis-sible where there isother support for theglass sheet.

Wallplug onsite to suitwall con-struction.

Threaded rodM8 with small head(eg DIN 6912).Length and type tosuit wallplug.

Components

Fixing with cheeseheadscrewDIN 7984 M10 x...,oroval-head wood screwDIN 7996 M8 x...depending on ceilingfixing requirements andwallplug type(by others)

Height adjust-mentvia grub screw

with clampingdisc

Single-pointcountersunk

Single-point fixingclamping disc

Single-point fixingcountersunk

Clip-on cover

Connection system

Page 13: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

11/06 13

Dimensions in mm

Glass preparationwith a tolerance ofmax. ± 0.3 mmis recommended.

Ensure compliancewith minimum glass/boreclearances as per glassmanufacturer recommenda-tions

±0.3

Glassthickness

For ESG and VSG out of ESG.

Clamping connector

Corner connectorsGlass/Glass

Glass/Wall

max.800

±0.3

max. 800 ±0.3

90°

3

3

DimensionA

DimensionA

Dimension B

Dimension B

Connecting rod

Connecting rod

90°95°100°105°110°115°120°125°130°135°180°

Angle A/B

52.5

A/B

60

A/B

82 103

Length ofConnecting rod

75706662595552494744

80757167636056545148

96908581777369666360

A/B

50

Dimensions for 10 mm glassthickness (consider variantsfor other glass thicknesses).

90°Angle A/B

52.5

A/B

60

A/B

82

Length ofConnecting rod

67/65 72/70 87.5/86

Dimensions for 10 mm glassthickness (consider variantsfor other glass thicknesses).

Plan view

Angle

150

60

28

28

28

28

32.5

28

3

72

Countersunk borefor countersunk single-pointfixings

Recommended centres forfixed glazing element

Cylindrical borefor clamping discsingle-point fixings

Cylindricalbore

Glass preparation for single-point fixings and corner connections

Corner connector glass/ceiling Corner connector glass/floor

Corner connectorsGlass/Glass 90° -180°

Corner connectorsGlass/Wall 90 -180°

Ceiling fixing (bearing)

90°

ø 32+0.2

ø 26

Glassthickness

ø 26+0.2

Ø15

28

3

AngleDimensionA

Dimension B

Wall

75

28

75

KS

Floor

Ceiling 41.5

Glass thickness

Verticallyadjustment± 2.5

65

72

3

5

Ceiling

67

Connecting rod

3- 0.2

Page 14: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

MANET CONCEPT Pivoting door system

MANET pivoting doors can beinstalled in both glass partiti-ons and masonry openings.They come as both single anddouble-action swing doors witha maximum weight of 100 kgand a maximum leaf width of1200 mm.All the single-point fixings aredesigned for clip-on covers foreasier installation. Other com-ponents include the bottompivot bearing, top pivot fittingswith bearing spigot or eccen-tric bushing and also overpa-nel/sidelight connectors.As a result, there are almostunlimited possibilities for inte-grating frameless swing doorsboth in masonry openings –with or without overpanels and

sidelights – and in glass parti-tion constructions retained bysingle-point fixings.The pivoting door system hasundergone a number of impro-vements. Whether with a full-length pivot rod or a pair ofshorter pivot rods, the topbearing socket is now locatedin the fitting on the door leaf.This means that connection tothe ceiling, lintel or transomcan now be provided in theform of the standard PT25 toppivot spigot from the DORMArange.The door assemblies can beequipped with floor springssuch as the DORMA BTS 75V,and corner locks are naturallyalso available.

Pivoting door system

Pivot bearing withpivot rod pairshort type withintermediate tube

Pivot bearing withpivot rod pairshort type

Pivot bearing withfull-length pivot rod

14 03/07

Page 15: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

07/07 15

Components for pivoting door system

A Overpanel/sidelight connector

complete fittingfor 10/12 mm glassArt. No. 8.29.330.700.99AISI 316LArt. No. 8.29.362.700.99

B Pivot fittingfor overpanel

Art. No. 8.21.310.700.99AISI 316LArt. No. 8.21.350.700.99

C Pivot rod,drilled, fixed lengthArt. No. 8.21.300.700.99AISI 316LArt. No. 8.21.340.700.99

Single-point fixing,countersunk, fixed 1

for 10/12 mm glassArt. No. 8.29.460.700.99AISI 316LArt. No. 8.29.461.700.99

for 13.5 -15.5 mm glassArt. No. 8.29.450.700.99

Single-point fixing,countersunk, centring2for 10/12 mm glassArt. No. 8.29.462.700.99AISI 316LArt. No. 8.29.463.700.99for 13.5 -15.5 mm glassArt. No. 8.29.455.700.99

Pivot rod set,short typetop/bottom,incl. 4 single-point fixingsArt. No. 8.29.302.700.99AISI 316LArt. No. 8.29.342.700.99ditto for intermediate tubeArt. No. 8.29.303.700.99AISI 316LArt. No. 8.29.343.700.99

Intermediate tubefixed length up to 2 mArt. No. 8.21.305.700.99AISI 316LArt. No. 8.21.345.700.99

Stock length 1.923 mmArt. No. 8.21.304.700.99AISI 316LArt. No. 8.21.344.700.99

D Pivot bearing forDORMA BTS/floor pivotArt. No. 8.21.311.700.99AISI 316LArt. No. 8.21.351.700.99

Ordering informationGlassthickness

Glassthickness

115

76

18.5

18.5

A

B

C

1

2

2

2

D

83

89

76

18.5

18.5

ø 25

ø32

ø32

intermediatetube

Page 16: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Components for pivoting door system

Ordering information

PT 25 top pivotfor ceiling connection,15 mm Ø, with plugArt. No. 8.01.115.000.99

Pivot bearing for RTSArt. No. 8.21.314.700.99

Pivot bearing locationfor overpanelfor 8 -12 mm glass,Art. No. 8.29.333.700.99AISI 316LArt. No. 8.29.353.700.99

Pivot bearing forinstallation to ceilingadjustablefor 8 -12 mm glass,AISI 316LArt. No. 8.21.318.700.99

Pivot bearing fittingfor overpanel withcylindrical bore for rodfor 8 -12 mm glass,Art. No. 8.29.354.700.99

Ordering information

Glassthickness

Glassthickness

115

60

ø25

40

18.5

Glassthickness

115

18.5

M8

MANET CONCEPT Pivoting door system

46

3

105

76

16 11/06

Floor pivotArt. No. 8.01.106.700.99

Pivot bearing for wet roomsArt. No. 8.21.540.700.99

32.5

15

92

76

18.5

76

18.5

Page 17: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

11/06 17

Components for pivoting door system

Overpanel/sidelightconnector for glass fixing90° offset,with pivot bearing location,complete fittingfor 10 and 12 mm glass,A right handArt. No. 8.29.331.700.99B left handArt. No. 8.29.332.700.99

Overpanel/sidelightconnector for wall fixing90° offset,with pivot bearing location,complete fittingfor 10 and 12 mm glass,C right handArt. No. 8.29.328.700.99D left handArt. No. 8.29.329.700.99

Overpanel/sidelightconnector for wall fixing90° offset,complete fittingfor 10 and 12 mm glass,E right handArt. No. 8.29.326.700.99F left handArt. No. 8.29.327.700.99

Ordering information

A C

A B

C D

E F

E

F B

D

Glassthickness

120

120

120

73 73.5

73.5

73.5

73.5

115

70 70 703

73

7033

18.5

18.5

3 70 703 3

Page 18: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Components for pivoting door system

Ordering information

Stop for pivoting doorwith ceiling mountingArt. No. 8.21.334.700.99

Stop at overpanel(inside/outside)for 10 and 12 mm glass,Art. No. 8.29.335.700.99

Ordering information

Ceiling

5

40

73 40

39

30

30

MANET CONCEPT Pivoting door system

18 11/06

Glass-thickness

Glass-thickness

120

40

3

Glass-thickness

120

40

3

Glass-thickness

120

40

3

Overpanel-sidelightconnectionfor 10 and 12 mm glass,Art. No. 8.29.320.700.99AISI 316LArt. No. 8.29.360.700.99

Overpanel-sidelightconnectionwith stop insidefor 10 and 12 mm glass,Art. No. 8.29.322.700.99

Overpanel-sidelightconnectionwith stop outsidefor 10 mm glass,Art. No. 8.29.324.700.99for 12 mm glass,Art. No. 8.29.325.700.99

Page 19: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

24.5

11/06 19

Components for pivoting door system

Ordering informationOrdering information

40

31

94

Wall

Wall

Floor

Glass

Glass

Wall Glass

ø20

ø20

Floor

Floor

Floor

Glassthickness

65

ø 40

1221

94

32

ø 25

ø 15.5

73

7

7

3

65

65

ø55

ø55

113

28.5

A

B

C

Corner lockfor 8 -12 mm glass,Art. No. 8.21.448.700.99

Corner lockwith profile cylinder rose oninside for 8 -12 mm glass,Art. No. 8.21.449.700.99

Profile cylinderfor corner lockArt. No. 8.14.206.000.99

A Eccentric bushingArt. No. 8.05.194.000.99B Bushing, plasticsArt. No. 8.00.110.133.32

C Strike plateArt. No. 8.05.190.000.99

Stop for pivoting doorfloor mountingArt. No. 8.29.950.700.99

Stop for pivoting doorwall mounting, shortArt. No. 8.29.951.700.99

Stop for pivoting doorwall mounting, longArt. No. 8.29.952.700.99

Page 20: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

MANET CONCEPT Pivoting door system

20 11/06

X

58811

Components for pivoting door system

Detail A

Detail B

Detail C

Detail Bto wall

Detail Ato wall

Detail Ato sidelight

Detail Bto glass wall

Detail Cto wall

Countersunkholes

Glass thickness

X

X X

3

X

3-0.2

Y

Y

3

Y

70

3 3

70 70

Y

ø26

113

113

3 3

90°

ø32+0.2

113

120

4040

40

120

50160

113

Glass thicknessmm

10/12

13.5 -15.5

The gap and distancedimensions recommended byDORMA are indicated in theadjacent table.

Connection

SidelightWall

SidelightWall

Y

65

62

Gap

Page 21: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Glass preparation for pivoting door system

Detail D

Detail D

Detail E

Detail Ewith stop

Detail EDetail B

BTS

Glass

67

40 40

Y

Y

67 50

X

50

3

3 3

3

67 50

3

120

120

120

113

113

X1±0.3

X2±0.3

X3±0.3

Overalllengthofpivotrod=Doorheight-54mm

89

18.5

24

7

50

3

3 3

40

11/06 21

Detail E

FFL

Page 22: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

22 07/06

MANET CONCEPT Sliding door system

Different anti-jumpdevices for solid andtubular track rails

Roller carrier TREND

Roller carrier TREND

Roller carrier CLASSIC

Roller carrier CLASSIC

Sliding door systemThe MANET sliding doorsystem is ideal as an elegantaddition complementinghigh-style interior concepts.Its main components take theform of a solid track rail andthe roller carrier. Whether youprefer the TREND or CLASSICversions, both can be combi-ned with the solid track or atubular track by simply repla-cing the anti-jump device.The range includes both glass-flush and proud single-pointfixings. The sliding doorsystem allows plenty of scopefor individual ideas.

In addition to the standardversions incorporated intoughened glass partitionsor face-fixed on masonryopenings, this hardwaresystem can also be used toconstruct curved sliding doors,biparting sliding doors andparallel sliding doors.The fittings are designed fora door weight of max. 120 kg.Mechanical stops that can bepositioned on the track railensure that the door traveldistance is effectively limited.

Glass connection with drilled solid track rails

Glass connection with clamp fixing and tubes

Page 23: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Roller carrier

Roller carrier TRENDincl. anti-jump device(both variants)

only lug with rollerArt. No. 8.29.414.700.99

Ordering information

07/07 23

55

55

208

55

55

205

Roller carrier CLASSICincl. anti-jump device(both variants)

only lug with rollerArt. No. 8.29.400.700.99AISI 316LArt. No. 8.29.401.700.99

2 piece single-point fixingfor roller carrier:

countersunk 8 -12mm glassArt. No. 8.29.430.700.99AISI 316LArt. No. 8.29.431.700.99

clamping disc 8-12mm glassArt. No. 8.29.432.700.99AISI 316LArt. No. 8.29.433.700.99

countersunkfor 13.5 -17.5 mm glassArt. No. 8.29.435.700.99

countersunk f. 19 mm glassArt. No. 8.29.437.700.99

Roller carrier TREND

Roller carrier CLASSIC

Page 24: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

24 11/06

MANET CONCEPT Sliding door system

Roller carrier single point fixings for timber doors

2 pieces single point fixingfor roller carrier:TREND / CLASSICcountersunkor clamping disc

see table

Ordering information

mm

20 - 30

35 - 40

Single-point fixing (2 pcs)

for roller carrier

Art. No.

countersunk clamping disc

29.510 29.520

Single-point fixing fixed

for track to glass

10/12 mm, see page 26

Art. No.

countersunk clamping disc

29.460 29.465

29.530 29.535

Single-point fixing cent-

ring for track to glass

10/12 mm, see page 26

Art. No.

countersunk clamping disc

29.462 29.467

29.531 29.536

Flange fixingtrack to wallsee page 27

Art. No.

21.346

21.412

max.doorweight

kg

120

100

Insertsolid track rail

Insertsliding track tube

Forsolid

trackrail

mm

18.5

35

X Z

mm

20 - 30

35 - 40

Single-point fixing (2 pcs)

for roller carrier

Art. No.

countersunk clamping disc

29.510 29.520

Clamp fixing fortrack to wallsee page 29

Art. No.

21.153

21.157

Clamp fixing fortrack to glasssee page 29

Art. No.countersunk clamping disc

29.171 29.172

29.518 29.519

max.doorweight

kg

120

100

Forslidingtracktube

mm

18.5

35

X Z

60

60

Glass thickness

Z

X

Z

Glass thickness

15 15

55

Height adjustment-2.5

Height adjustment-2.5

55

37 37

35

28

35

28

X

Page 25: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

11/06 25

Solid track rail Supply and installationTrack supply and installationThe track rail for the slidingdoor is pre-fabricated accor-ding to the customer’s drawingand supplied together with theglass or wall brackets orderedfor the application concerned.

Fixing screws for wallinstallation by othersOf decisive importance for pre-fabrication and fixing to glasspartitions is that the mountingpoints coincide with the holesdrilled in the glass. The length-wise tolerances should not begreater than +/- 0.3 mm.

For rail support intervals onthe glass wall or masonry,see fixing point intervalrecommendations per thetable.

Wall/single-pointfixing clearance whenusing the wallconnec-tor (depends on stop-per position).

Caution! Ensure that the stops/single-point fixings arepositioned at locations appropriate to the width of the

door.

G = Fixing point to glassW = Fixing point to wall

K = ConnectionWK = Angle-connection

Required dimensions for the track production

G

see table 50

100 see table

see table

Track length

max. 5000 with connector

* Note!Ensure that track joints and glass joints do not coincide

max. 5000 with angle-connector

max. 5000 with connector

3

3

min. 80

min.80

37.5

37.5

18.5

18.5

G W W

G

G

G G GG

K*

WK

G G G

100 100see table

see table see table see table

1900

2000

2100

2200

2300

2400

2500

700 800 900 1000 1100 1200 1300 1400Door width in mm

Glass thickn. mm

Doorheightin mm 8

770

750

730

710

690

680

660

10

710

700

680

660

640

630

610

12

670

650

640

620

610

590

580

Glass thickn. mm8

770

750

730

710

700

680

670

12

670

660

640

620

610

590

580

Glass thickn. mm8

770

750

730

710

700

680

670

10

710

690

680

660

650

630

620

12

670

650

640

620

610

590

580

Glass thickn. mm8

760

740

730

710

690

680

660

10

710

690

670

660

640

630

620

12

670

650

630

620

600

590

580

Glass thickn. mm8

760

740

720

700

690

670

660

10

700

680

670

650

640

620

610

12

660

640

630

610

600

590

580

Glass thickn. mm8

750

730

710

700

680

670

650

10

700

680

660

650

630

620

610

12

650

640

620

610

600

580

570

Glass thickn. mm8

740

720

710

690

680

660

650

10

690

670

660

640

630

610

600

12

650

630

620

600

590

580

570

Glass thickn. mm8

730

720

700

680

670

660

640

10

680

660

650

630

620

610

600

12

640

630

610

600

580

-

-

10

720

700

680

660

650

630

620

Recommended distance of the track fixing points

Page 26: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

MANET CONCEPT Sliding door system

Components for sliding door system Solid track rail and accessories

Ordering information

Recommended distance of the fixing points see page 25 *for X see page 24

up to 6m*

Connection 180°

Solid track rail

ø25

The track rail isprefabricated percustomer specifi-cations/drawingwith all the neces-sary drill holesalready provided.

37.5

37.5

Threaded rodM5 x 6

Angleconnection90 -180°

*max. single length 5 mby coupling

A for *X = 20 - 30 mmSingle-point fixing,countersunk, fixedfor 10 and12 mm glass

Art. No. 8.29.460.700.99AISI 316LArt. No. 8.29.461.700.99

for 13.5 -15.5 mm glassArt. No. 8.29.450.700.99for 17.5 mm glassArt. No. 8.29.451.700.99

clamping disc, fixedfor 10/12 mm GlasArt. No. 8.29.465.700.99countersunk, centringfor 10 and 12 mm glass

Art. No. 8.29.462.700.99AISI 316LArt. No. 8.29.463.700.99for 13.5 -15.5 mm glassArt. No. 8.29.455.700.99for 17.5 mm glassArt. No. 8.29.456.700.99

clamping disc, centringfor 10/12 mm glass

Art. No. 8.29.467.700.99AISI 316LArt. No. 8.29.468.700.99

B for *X = 35 - 40 mmSingle-point fixing,countersunk, fixedfor 10 and12 mm glass

Art. No. 8.29.530.700.99

clamping disc, fixedfor 10/12 mm GlasArt. No. 8.29.535.700.99countersunk, centringfor 10 and 12 mm glass

Art. No. 8.29.531.700.99

clamping disc, centringfor 10/12 mm glass

Art. No. 8.29.536.700.99

Track, drilled

for fixing on glassup to 6 mArt. No. 8.21.405.700.99AISI 316LArt. No. 8.21.456.700.99

for fixing on wallup to 6 mArt. No. 8.21.406.700.99AISI 316LArt. No. 8.21.457.700.99

Connectorsincl. frontal preparation intracks,

for tracks 180°Art. No. 8.21.404.700.99

offsetfor tracks 90 -180°Art. No. 8.21.442.700.99

Single point fixing for fixing thetrack to glass

Glass thickness

18.5

ø25

26 11/06

A

Glass thickness

35

ø25

B

Page 27: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Components for sliding door system Solid track rail and accessories

Flange for fixing the trackto wallArt. No. 8.21.346.700.99AISI 316LArt. No. 8.21.347.700.99

Flange for fixing the trackto wall, adjustableArt. No. 8.21.412.700.99

Fixing for double trackArt. No. 8.21.170.700.99

Ceiling retainer for track

carrying functionArt. No. 8.21.315.700.99

Ordering information

Flange for fixing the trackto wall

18.5

18.5

10/12

35

ø 65

110

ø20

ø55

ø 25

ø 25

29

ø25

60

ø25

Flange for fixing the trackto wall,adjustable

Flange for fixing a double track

Note: Min. distanceglass to wall 32 mm

2-dimensional adjustmentvia oblong hole

Recommended distance of the fixing points see page 25

Adjust-ment + 5 mm

11/06 27

Page 28: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

28 07/06

MANET CONCEPT Sliding door system

Components for sliding door system Tube and accessories

Ordering information

3m/6m

Sliding track tubeincl. end plugsstock length 3mArt. No. 8.21.527.700.99AISI 316LArt. No. 8.21.530.700.99

Fixed length up to 6 mArt. No. 8.21.436.700.99AISI 316LArt. No. 8.21.532.700.99

Sliding track tubebent, incl. end plugs

max. curve length 2.6 mArt. No. 8.21.409.700.99

max. curve length 5.6 mArt. No. 8.21.413.700.99

Curve length

r=

min.600mm

ø21

ø25

40

ø21

40

40

Angle connectionfor sliding track tubeArt. No. 8.29.506.700.99

Thread insertfor sliding track tubeArt. No. 8.29.505.700.99

see table

Recommended distance of thetrack fixing points

1900

2000

2100

2200

2300

2400

2500

700 800 900 1000 1100 1200 1300 1400

Door width in mm

Glass thickn. mm

Doorheightin mm

8

350

350

350

350

350

350

350

10

350

350

350

350

350

350

350

12

350

350

350

350

350

350

350

Glass thickn. mm8

400

400

400

400

400

400

400

10

400

400

400

400

400

400

400

12

400

400

400

400

400

400

400

Glass thickn. mm8

450

450

450

450

450

450

450

10

450

450

450

450

450

450

450

12

450

450

450

450

450

450

450

Glass thickn. mm8

500

500

500

500

500

500

500

10

500

500

500

500

500

500

490

12

500

500

500

490

480

470

460

Glass thickn. mm8

550

550

550

550

550

530

520

10

550

540

530

520

510

500

490

12

530

510

500

490

480

470

460

Glass thickn. mm8

600

580

570

550

540

530

520

10

550

540

530

510

500

490

480

12

520

510

500

480

470

460

450

Glass thickn. mm8

590

570

560

550

540

530

520

10

550

530

520

510

500

490

480

12

510

500

490

480

470

460

450

Glass thickn. mm8

580

570

560

540

530

520

510

10

540

530

520

500

490

480

470

12

510

500

490

470

460

-

-

Page 29: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Components for sliding door system Tube and accessories

11/06 29

Ordering information

Clamp fixingfor sliding track tube toglass, single-point fixingcountersunkfor 10, 12 and 13.5mm glassArt. No. 8.29.171.700.99AISI 316LArt. No. 8.29.181.700.99

single-point fixing, clamping discfor 10, 12 and 13.5mm glassArt. No. 8.29.172.700.99AISI 316LArt. No. 8.29.182.700.99

16 mm extendedsingle-point fixing, countersunkfor 10, 12 and 13.5mm glassArt. No. 8.29.518.700.99AISI 316LArt. No. 8.29.183.700.99

single-point fixing, clamping discfor 10, 12 and 13.5mm glassArt. No. 8.29.174.700.99AISI 316LArt. No. 8.29.184.700.99

Clamp fixingfor sliding track tube to wallArt. No. 8.21.153.700.99AISI 316LArt. No. 8.21.163.700.99

Clamp fixingfor sliding track tube to wall16 mm extendedArt. No. 8.21.157.700.99

Clamp fixingto fix the sliding track tubefor double panelled slidingdoorsArt. No. 8.21.154.700.99

ø 25

18.5

18.5

35

48

ø 25

ø 25

ø 25

Glass thickness

ø 25

35

Glass thickness

Ceiling retainerfor sliding track tube,carrying functionArt. No. 8.21.316.700.99

ø 65

110

ø 25

ø 2526

Page 30: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Glass preparation for sliding door system

MANET CONCEPT Sliding door system

Sliding door with two sidelights and overpanel

Sliding door with sidelight and overpanel

Sliding door to wall

Detail A Detail B

Detail C

Sliding doorWall

Wall

Overpanel

Sidelight

Sliding door Wall

Sliding door

Overpanel

SidelightSidelight

Detail D

Detail E Detail D

30 11/06

Page 31: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Glass preparation for sliding door system

Sliding door with tube andclamp fixing

Sliding door withsolid track rail

Detail D

27.5

27.5

27.5

18.5

35

60

50

55

27.5

18.5

35

60

50

55

40

Detail C

Detail E

Detail A Detail B

3 -0.2

Glass thickness Glass thickness

ø26

ø32+0.2

ø26

90°

143 143

143143

glass edge protectionon site

143

100

3

50 50

40

40

3

50

4040

Countersunkbore for coun-tersunk single-point fixings

Cylindrical borefor clampingdisc single-point fixings

Dimensional data should be regardedexclusively as recommended values.Please remember when designingyour system that the positions of thestops and point fixings must notvertically coincide.

For spacing/interval recommendati-ons when drilling the track holes,and for requisite dimensions forfixing the track rail,please refer to the table entitled“Recommended distance of the trackfixing points”.

11/06 31

Page 32: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Components for sliding door system

MANET CONCEPT Sliding door system

Ordering information

Door stopleft handArt. No. 8.29.425.700.99

AISI 316LArt. No. 8.29.427.700.99

right handArt. No. 8.29.426.700.99

AISI 316LArt. No. 8.29.428.700.99

Roller to glassfor 8 -12 mm glass,countersunkArt. No. 8.29.494.700.99

clamping discArt. No. 8.29.495.700.99

Anti-jump devicefor roller to glassfor 8 -12 mm glass,countersunkArt. No. 8.29.497.700.99

clamping discArt. No. 8.29.498.700.99

Door stopfor roller to glassArt. No. 8.29.493.700.99

Wall fixing fortube /solid track railArt. No. 8.29.445.700.99AISI 316LArt. No. 8.29.446.700.99

Door steady,to prevent glass edges ofdouble sliding doorsbumping into each otherArt. No. 8.29.420.700.99

stop is usable left hand andright hand

left hand

right hand

56

2070

50

35

ø35

ø25

32 02/08

6

Page 33: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Components for sliding door system

Ordering information

Aluminium brush profile

similar satin stainless steel

for 8 mm glassstock length 3 mArt. No. 8.07.402.113.99

fixed length up to 6 mArt. No. 8.07.403.113.99

for 10/12 mm glassstock length 3 mArt. No. 8.07.400.113.99

fixed length up to 6 mArt. No. 8.07.401.113.99

Sliding door lock withratchet brace

for 8/10/12 mm glass

Art. No. 8.21.446.700.99AISI 316L

Guide rail with brush sealsapplicable for8/10/12 mm glass

aluminium mill finishedfixed length up to 6 mArt. No. 8.21.431.100.99

stock length 3 mArt. No. 8.21.432.100.99

Floor guideclamping disc,applicable for8/10/12/13.5 mm glassArt. No. 8.07.326.000.99

13.5

37.5

15.5for 8 mm glass

13.5for 10 mm glass

11.5for 12 mm glass

ø38

ø48

75

30

50

23

24

30

15

15

7

11/06 33

Page 34: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

MANET CONCEPT Pull handle /knob system

The pull handle/knob systemis designed for glass of 8, 10and 12 mm thickness.The pull handles can be fixedto both sliding and pivoting(swing) doors on one faceusing the appropriate connec-tors or on both faces bythrough-bolting (back-to-backarrangement). The single-point fixings and throughbolts are included as standardequipment in the scope ofsupply.The pull handles can be fittedhorizontally, vertically or in ahandrail arrangement.

Pull handles and door knobs

Pull handles with single-point fixings, countersunkfor 8/10/12 mm glass

Pull handle 350 mmwith 2 fixingsArt. No. 8.29.268.700.99AISI 316LArt. No. 8.29.269.700.99

Pull handle 720 mmwith 2 fixingsArt. No. 8.29.271.700.99AISI 316LArt. No. 8.29.272.700.99

Pull handle 1240 mmwith 3 fixingsArt. No. 8.29.274.700.99AISI 316LArt. No. 8.29.275.700.99

Pull handle 1760 mmwith 4 fixingsArt. No. 8.29.277.700.99AISI 316LArt. No. 8.29.278.700.99

Pull handles with clampingdisc single-point fixingsfor 8/10/12 mm glass

Pull handle 350 mmwith 2 fixingsArt. No. 8.21.240.700.99AISI 316LArt. No. 8.21.280.700.99

Pull handle 720 mmwith 2 fixingsArt. No. 8.21.241.700.99AISI 316LArt. No. 8.21.281.700.99

Pull handle 1240 mmwith 3 fixingsArt. No. 8.21.242.700.99AISI 316LArt. No. 8.21.282.700.99

Pull handle 1760 mmwith 4 fixingsArt. No. 8.21.243.700.99AISI 316LArt. No. 8.21.283.700.99

Ordering information

Single-point fixingcountersunk

Single-pointfixingclamping disc

Complete withsingle-point fixings

ø32

ø16

45.5ø 25

Glassthickness

350

150

520

520

520

1240

1760

720

34 11/06

Page 35: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Pull handles and door knobs

Complete withconnecting bolt

Pair of pull handlesincl. connecting boltfor 8/10/12 mm glass

Pair of pull handles350 mm, with 2 fixingsArt. No. 8.21.267.700.99AISI 316LArt. No. 8.21.247.700.99

Pair of pull handles720 mm, with 2 fixingsArt. No. 8.21.270.700.99AISI 316LArt. No. 8.21.250.700.99

Pair of pull handles1240 mm, with 3 fixingsArt. No. 8.21.273.700.99AISI 316LArt. No. 8.21.253.700.99

Pair of pull handles1760 mm, with 4 fixingsArt. No. 8.21.276.700.99AISI 316LArt. No. 8.21.256.700.99

Ordering information

Door knob one side fixingfür 8/10/12 mmGlas

Door knob with single-pointfixing, countersunkArt. No. 8.21.422.700.99

Door knob with clampingdisc single-point fixingsArt. No. 8.21.426.700.99

Door knob back-to-backfor 8/10/12 mm glassArt. No. 8.21.423.700.99

single-pointfixingcountersunk

single-pointfixingclamping disc

Glass thickness

ø16

45 70

ø 25ø 25

Glass thickness

Glassthickness

51

ø32

ø25

ø25

51 51

350

150

520

520

520

1240

1760

720

11/06 35

Page 36: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

MANET CONCEPT Pull handle /knob system

Spacing adjustment for pull handles and door knobs

at length of pull handles350 mm

Ordering information

Conversion set 1 forglass doors,pair of pull handles/knob back-to-back

door thickn. 13.5–21.5 mmArt. No. 8.21.285.700.99

Conversion set 2 fortimber doors,pair of pull handles/knob back-to-back

door thickn. 20– 40 mmArt. No. 8.21.286.700.99

Conversion set 3for glass/timber doors,pull handle/knob single-sided,

single-point fixingcountersunk/clamping discdoor thickn. 15– 40 mmArt. No. 8.21.287.700.99

Countersunk boreon pull handle and door knob,one side fixing

3 -0.2

Glass thickness

Glass thickness

ø26

ø32+0.2

ø22

90°

Cylindrical boreon pair of pull handlesand door knobs,back-to-back

1560mm±0.31040mm±0.3

520mm±0.3

150mm±0.3

min. ca. 65

min. ca. 65

Glass preparation pull handles and door knobs

Glass doorsdoor thickn. 13.5 mm: without Distancewasherdoor thickn. 15 mm: with 1 Distance washerdoor thickn. 17.5 mm: with 2 Distance washerdoor thickn. 19 mm: with 3 Distance washerdoor thickn. 21.5 mm: with 4 Distance washer

Timber doorsdoor thickn. 20 mm: without distance washerdoor thickn. 25 mm: with 1 distance washerdoor thickn. 30 mm: with 2 distance washerdoor thickn. 35 mm: with 3 distance washerdoor thickn. 40 mm: with 4 distance washer

Glass doors/timber doorsdoor thickn. 15–21.5 mm: cylinder head screw M6x25door thickn. 25–30 mm: cylinder head screw M6x35door thickn. 35–40 mm: cylinder head screw M6x50

Distance washer2 mm

Distance washer5 mm

36 11/06

Page 37: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

07/07 37

Recessed pull grip und ARCOS pull handle

Ordering information

ARCOS pair of pull handlefor 8/10/12 mm glassincl. connecting bolt

only in AISI 316L

Pull handle 350 mmwith 2 fixingsArt. No. 8.26.500.700.99

Pull handle 750 mmwith 2 fixingsArt. No. 8.26.510.700.99

ø16

ø16

80

Glassthickness

Cylindrical bore

Connectingbolt

398/824mm

350/750mmdrillholecentres

~ 6585

Bushing

Grub screw

Glassthickness

Recessed pull gripØ 50 mmfor 8/10/12 mm glassArt. No. 8.21.290.700.99

Recessed pull gripØ 60 mmfor 8/10/12 mm glassArt. No. 8.21.291.700.99

Glassthickness

Glassthickness

Cylindricalbore

ø50

ø38

20 3

Glass thickness Glass thickness

Cylindricalbore

ø60

ø50

9 9

Page 38: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

DORMA MANET COMPACT Sets

Page 39: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Content

Pivoting door 40

Sliding door 44

MANETCOMPACT Sets

Page 40: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Pivoting doorsSet 1page 41

Pivoting doorsSet 2page 42

Pivoting doorsSet 3page 43

Pivoting doorsSet 2 + 3page 42/43

Sliding doorsSet 4/5/6page 44 - 49

MANET COMPACT Sets

Construction 5 (2 sets) Construction 6 (2 sets) Construction 7 (2 sets) Construction 8 (2 sets)

Construction 1 (1 set) Construction 2 (1 set) Construction 3 (1 set) Construction 4 (1 set)

The aesthetic elegance of theMANET COMPACT concept isalso available in the form ofstandardised sets for simple,fast planning of the morepopular system types with 8,10 or 12 mm toughenedsafety glass (TSG).Optional accessories enablethe individual sets to besemi-customised.

The system components offernumerous adjustment possibi-lities in order to ensure pro-blem-free installation ofwhichever door type – slidingor swing, single action ordouble action – is required.Wall abutment profiles mayneed to be provided (byothers) for fixing overpanelsand sidelights.

Construction 9 (1 set) Construction 12 (1 set) Construction 18 (2 sets)

Set 4.1/4.2 Set 5.1/5.2 Set 6.1/6.2

Construction 13 (1 set) Construction 15 (1 set) Construction 23 (2 sets)

Construction 21 (each 1 set)

MANET COMPACT Sets

40 11/06

Page 41: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Set 1

Ordering information

Set 1 consisting of:pivot rod pair top/bottom,short type,

including:4 Single-point fixings for pivot rods,1 Pivot fitting top,1 PT 25 pin, 15 mm Ø, with plug1 Pivot fitting bottomfor DORMA BTS/floor pivot

Art. No. 8.29.910.700.99

Art. No. 8.29.911.700.99

Option:Set 1, but with additional intermediate tube for pivot rod pairin fixed length

Options for SET 1

Pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm

Pair of pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm

Stopfor pivoting door with ceiling mounting

Ceiling fixing (bearing function)

Corner lock

Corner lockwith rose on one lock side

Profile cylinder forcorner lock 8.21.448/449.700.99

Eccentric bushing forcorner lock 8.21.448/449.700.99

Floor pivot bearing

Assembling tool for MANET single-pointfixings

5 pcs. clip-on cover f. single-point fixings

Sample cases MANET COMPACTfor advice and presentation

Art. No. 8.29.268.700.99Art. No. 8.29.271.700.99Art. No. 8.29.274.700.99Art. No. 8.29.277.700.99

Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99

Art. No. 8.21.334.700.99Art. No. 8.29.337.700.99

Art. No. 8.21.448.700.99

Art. No. 8.21.449.700.99

Art. No. 8.14.206.000.99

Art. No. 8.05.194.700.99

Art. No. 8.01.106.700.99

Art. No. 8.21.134.000.99

Art. No. 8.29.217.700.99

Art. No. 8.21.994.700.99

S8

S8

Pivoting door MANET COMPACT without overpanel for 10 -12 mm glass

Set 1with pivot rod pairshort type

For the requisite glass preparationplease see pages 20/21

3Gap

150

113

65

Ceiling

7Gap

Gapto sidelight 5to wall 8

Door weight80 kg

Door height2500 mm

Door width1200 mm

150

113

65

DORMABTS

Panel height _________ mm– 577 mm= Length intermed. tube_________ mm

Essential information:

07/07 41

Page 42: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

MANET COMPACT Sets

Set 2

Ordering information

Set 2 consisting of:pivot rod pair top/bottom,short type,

including:4 Single-point fixings for pivot rods,1 Pivot fitting top,1 Pivot bearing location for overpanel1 Pivot fitting bottomfor DORMA BTS/floor pivot

Art. No. 8.29.912.700.99

Art. No. 8.29.913.700.99

Option:Set 2, but with additional intermediate tube for pivot rod pairin fixed length

Options for SET 2

Pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm

Pair of pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm

Ceiling fixing (bearing function)

Stop at overpanel, (inside/outside)for 10 and 12 mm glass

Corner lock top/bottom

Corner lock top/bottomwith rose on one lockside

Profile cylinder forcorner lock 8.21.448/449.700.99

Eccentric bushing forcorner lock 8.21.448/449.700.99

Overpanel-sidel. conn. for 10/12 mm glass

Overp.-sidel. conn. with stop inside for10 and 12 mm glass

Overp.-sidel. conn. with stop outsidefor 10 mm glassfor 12 mm glass

Floor pivot

Assembling tool for MANET-single-point f.

5 pcs. clip-on cover f. single-point fixings

Sample cases MANET COMPACTfor advice and presentation

Art. No. 8.29.268.700.99Art. No. 8.29.271.700.99Art. No. 8.29.274.700.99Art. No. 8.29.277.700.99

Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99

Art. No. 8.29.337.700.99

Art. No. 8.29.335.700.99

Art. No. 8.21.448.700.99

Art. No. 8.21.449.700.99

Art. No. 8.14.206.000.99

Art. No. 8.05.194.700.99

Art. No. 8.29.320.700.99

Art. No. 8.29.322.700.99

Art. No. 8.29.324.700.99Art. No. 8.29.325.700.99

Art. No. 8.01.106.700.99

Art. No. 8.21.134.000.99

Art. No. 8.29.217.700.99

Art. No. 8.21.994.700.99

Pivoting door MANET COMPACT with overpanel for 10 -12 mm glass

Set 2with pivot rod pairshort type

For the requisite glass preparationplease see pages 20/21

3Gap

Wall

150

113

65

Overpanel

7Gap

Gap towall 8

Door weight80 kg

Door height2500 mm

Door width1200 mm

150

113

65

DORMABTS

Panel height _______ mm– 577 mm= Length intermed. tube_______ mm

Essential information:

42 07/07

Page 43: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Set 3

Ordering information

Set 3 consisting of:pivot rod pair top/bottom,short type,

including:4 Single-point fixing for pivot rods,1 Pivot fitting top,1 Overpanel-sidelight connector withpivot bearing location,

1 Pivot fitting bottomfor DORMA BTS/floor pivot bearing

Art. No. 8.29.914.700.99

Art. No. 8.29.915.700.99

Option:Set 3, but with additional intermediate tube for pivot rod pairin fixed length

Options for SET 3

Pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm

Pair of pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm

Ceiling fixing (bearing function)

Stop at overpanel, (inside/outside)for 10 and 12 mm glass

Corner lock

Corner lockwith rose on one lockside

Profile cylinder forcorner lock 8.21.448/449.700.99

Eccentric bushing forcorner lock 8.21.448/449.700.99

Overpanel-sidel. conn. for 10/12 mm glass

Overp.-sidel. conn. with stop inside for10 and 12 mm glass

Overp.-sidel. conn. with stop outsidefor 10 mm glassfor 12 mm glass

Floor pivot

Assembling tool for MANET-single-point f.

5 pcs. clip-on cover f. single-point fixings

Sample cases MANET COMPACTfor advice and presentation

Art. No. 8.29.268.700.99Art. No. 8.29.271.700.99Art. No. 8.29.274.700.99Art. No. 8.29.277.700.99

Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99

Art. No. 8.29.337.700.99

Art. No. 8.29.335.700.99

Art. No. 8.21.448.700.99

Art. No. 8.21.449.700.99

Art. No. 8.14.206.000.99

Art. No. 8.05.194.700.99

Art. No. 8.29.320.700.99

Art. No. 8.29.322.700.99

Art. No. 8.29.324.700.99Art. No. 8.29.325.700.99

Art. No. 8.01.106.700.99

Art. No. 8.21.134.000.99

Art. No. 8.29.217.700.99

Art. No. 8.21.994.700.99

Pivoting door MANET COMPACT with overpanel and sidelight for 10 -12 mmglass

Set 3with pivot rod pair,short type

For the requisite glass preparationplease see pages 20/21

3Gap

3 Gap

Sidelight

150

113

65

Overpanel

7Gap

Gap towall 8

Door weight80 kg

Door height2500 mm

Door width1200 mm

150

113

65

DORMABTS

Panel height ________ mm– 577 mm= Length intermed. tube_________ mm

Essential information:

07/07 43

Page 44: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

MANET COMPACT Sets

Set 4.1 / 4.2

Sliding door MANET COMPACT for installation to wall, for 8 -12 mm glass

For the requisite glass preparation pleasesee pages 30/31

60

143

143143

Doorheightmax.2500mm

85

40 40

DGB = LM - 130 mm

LM

TB = LM + 80 mm

Fixed length: LL = 4 * X +286 mm

X XX X

Note:Door weight max. 100 kg

Set 4.1with single-point fixings countersunk

Set 4.2with clamping disc single-point fixings

LM = Daylight opening 700 - 1280 mmTB = Door width 780 - 1360 mmDGB = Entry width 570 - 1150 mmLL = Sliding track tube lengthX = Distance of single-point fixings

(LM –148) * 1/2

44 11/06

Page 45: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Set 4.1 / 4.2

Set 4.1 / Set 4.2consisting of

5 Clamp fixingsfor track to wall

2 Roller carriers CLASSICincl. single-point fixings for 8 -12 mm glass

1 Door stop left hand1 Door stop right hand1 Floor guideInstallation tools

Set as above,but with 16 mm extended clamp fixing

Art. No. 8.29.917.700.99Art. No. 8.29.916.700.99

Art. No. 8.29.925.700.99

Options for Set 4.1 / Set 4.2

Pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm

Pair of pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm

Door knobback-to-back for 8 - 12 mm glass

Door knobone side fixing for 8 - 12 mm glass

Corner lock

Corner lockwith rose on one lock side

Profile cylinder forcorner lock 8.21.448/449.700.99

Eccentric bushing forcorner lock 8.21.448/449.700.99

Aluminium guide railLength 3000 mm

Assembling tool for MANET single-point fixing

5 pcs. clip-on cover f. single-point fixings

Sample cases MANET COMPACTfor advice and presentation

Art. No. 8.21.240.700.99Art. No. 8.21.241.700.99Art. No. 8.21.242.700.99Art. No. 8.21.243.700.99

Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99

Art. No. 8.21.423.700.99

Art. No. 8.29.422.700.99

Art. No. 8.21.448.700.99

Art. No. 8.21.449.700.99

Art. No. 8.14.206.000.99

Art. No. 8.05.194.700.99

Art. No. 8.21.432.700.99

Art. No. 8.21.134.700.99

Art. No. 8.29.217.700.99

Art. No. 8.21.994.700.99

Sliding door MANET COMPACT forinstallation to wall, for 8 -12 mm glass

Set 4.1with countersunksingle-point fixings

Set 4.2with clamping discsingle-point fixings

Art. No. 8.29.268.700.99Art. No. 8.29.271.700.99Art. No. 8.29.274.700.99Art. No. 8.29.277.700.99

Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99

Ordering information

Art. No. 8.29.926.700.99

10/07 45

Page 46: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

MANET COMPACT Sets

Set 5.1 / 5.2

Sliding door MANET COMPACT for installation to glass, one side attached to masonryfor sliding door 8 -12 mm glass,glass connection overpanel/sidelight 10 - 13.5 mm

For the requisite glass preparationplease see pages 30/31

60

143

50

50

30

143143

Doorheightmax.2500mm

70

40

DGB = LM–100 mm

LM

TB = LM + 40 mm

Fixed length: LL = 2 * X + 2 * Y + 360 mm

OB = LM–3 mm

Gap 3 mm

SB min. = LM–60 mm

X X Y Y

Note:Door weight max. 100 kg

Sliding door

SidelightOverpanel

Set 5.1with countersunk single-point fixings

Set 5.2with clamping disc single-point fixing

LM = Daylight opening 700 -1320 mmTB = Door width 740 -1360 mmDGB = Entry width 600 -1220 mmSBmin. = min. sidelight widthLL = Sliding track tube lengthX = Centre distance

between single-point fixingsoverpanel(OB –193) * 1/2

Y = Centre distancebetween single-point fixingssidelightY = X–29

OB = Overpanel width

46 11/06

Page 47: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Set 5.1 / 5.2

Set 5.1 / Set 5.2consisting of

6 Clamp fixingsfixing to glass, countersunk

2 Roller carriers CLASSICincl. single-point fixings for 8 -12 mm glass

1 Wall fixing1 Door stop left hand1 Door stop right hand1 Floor guideInstallation tools

Art. No. 8.29.919.700.99Art. No. 8.29.918.700.99

Options for Set 5.1 / Set 5.2

Pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm

Pair of pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm

Door knobback-to-back for 8 - 12 mm glass

Door knobone side fixing for 8 - 12 mm glassCorner lock

Corner lockwith rose on one lock side

Profile cylinder forcorner lock 8.21.448/449.700.99

Eccentric bushing forcorner lock 8.21.448/449.700.99

Aluminium guide railLength 3000 mm

Ceiling connector(bearing function)

Assembling tool for MANET single-point fixing

5 pcs. clip-on cover f. single-point fixings

Sample cases MANET COMPACTfor advice and presentation

Art. No. 8.21.240.700.99Art. No. 8.21.241.700.99Art. No. 8.21.242.700.99Art. No. 8.21.243.700.99

Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99

Art. No. 8.29.268.700.99Art. No. 8.29.271.700.99Art. No. 8.29.274.700.99Art. No. 8.29.277.700.99

Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99

Art. No. 8.21.423.700.99

Art. No. 8.29.422.700.99

Art. No. 8.21.448.700.99

Art. No. 8.21.449.700.99

Art. No. 8.14.206.000.99

Art. No. 8.05.194.700.99

Art. No. 8.21.432.700.99

Art. No. 8.29.337.700.99

Art. No. 8.21.134.000.99

Art. No. 8.29.217.700.99

Art. No. 8.21.994.700.99

Sliding door MANET COMPACT for installation toglass, one side attached to masonry,for sliding door 8 -12 mm glass,glass connection overpanel/sidelight 10 - 13.5 mm

Set 5.1with countersunksingle-point fixings

Set 5.2with clamping discsingle-point fixings

Ordering information

10/07 47

Page 48: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

MANET COMPACT Sets

Set 6.1 / 6.2

Sliding door MANET COMPACT for installation to glass, sidelights on both sidesfor sliding door 8 -12 mm glass,glass connection overpanel/sidelight 10 - 13.5 mm

For the requisite glass preparationplease see page 30/31

60

143

50

5050

100

143143

Doorheightmax.2500mm

70

4040

DGB = LM–100 mm

LM

TB = LM + 80 mm

Fixed length: LL = 2 * X + 2 * Y + 460 mm

OB = LM–6 mmmin. 110

Gap 3 mmGap 3 mm

SB min. = LM–20 mm

X X Y Y

Note:Door weight max. 100 kg

Sliding door

SidelightSide-light

Overpanel

Set 6.1with countersunk single-point fixings

Set 6.2with clamping disc single-point fixings

LM = Daylight opening 700 -1320 mmTB = Door width 740 -1360 mmDGB = Entry width 600 -1220 mmOB = Overpanel widthSBmin.= min. Sidelight widthLL = Sliding track tube lengthX = Centre distance

between single-point fixingsoverpanel(OB –150) * 1/2

Y = Centre distancebetween single-point fixingssidelightY = X–29

48 11/06

Page 49: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Set 6.1 / 6.2

Set 6.1 / Set 6.2consisting of

7 Clamp fixingsfixing to glass

2 Roller carriers CLASSICincl. single-point fixings for 8 -12 mm glass

1 Door stop left hand1 Door stop right hand1 Floor guideInstallation tools

Art. No. 8.29.921.700.99Art. No. 8.29.920.700.99

Options for Set 6.1 / Set 6.2

Pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm

Pair of pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm

Door knobback-to-back for 8 - 12 mm glass

Door knobone side fixing for 8 - 12 mm glass

Sliding door lock with ratchet brace

Corner lock

Corner lockwith rose on one lock side

Profile cylinder forcorner lock 8.21.448/449.700.99

Eccentric bushing forcorner lock 8.21.448/449.700.99

Aluminium guide railLength 3000 mm

Ceiling connector(bearing function)

Assembling tool for MANET single-point fixing

5 pcs. clip-on cover f. single-point fixings

Sample cases MANET COMPACTfor advice and presentation

Art. No. 8.21.240.700.99Art. No. 8.21.241.700.99Art. No. 8.21.242.700.99Art. No. 8.21.243.700.99

Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99

Art. No. 8.29.268.700.99Art. No. 8.29.271.700.99Art. No. 8.29.274.700.99Art. No. 8.29.277.700.99

Art. No. 8.21.267.700.99Art. No. 8.21.270.700.99Art. No. 8.21.273.700.99Art. No. 8.21.276.700.99

Art. No. 8.21.423.700.99

Art. No. 8.29.422.700.99

Art. No. 8.21.446.700.99

Art. No. 8.21.448.700.99

Art. No. 8.21.449.700.99

Art. No. 8.14.206.000.99

Art. No. 8.05.194.700.99

Art. No. 8.21.432.700.99

Art. No. 8.29.337.700.99

Art. No. 8.21.134.000.99

Art. No. 8.29.217.700.99

Art. No. 8.21.994.700.99

Sliding door MANET COMPACT for installation toglass, sidelight on both sides,for sliding door 8 -12 mm Glas,glass connection overpanel/sidelight 10 - 13.5 mm

Set 6.1with single-point fixingscountersunk

Set 6.2with clamping discsingle-point fixings

Ordering information

10/07 49

Page 50: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

DORMA MANET AMBIENT

Page 51: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Content

System 52

Single-point fixings 54

Rods / Tracks 56

Connectors 58

Pivoting doors 60

Sliding doors 64

MANETAMBIENT

Page 52: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

1

Wall/ceiling connector

2

Connector

3

Recessed pull grip

4

Inboard furniture hinge

5

Insert rod

6

Top insert

7

Bottom insert

8

Shelf support

9

Outboard furniture hinge

10

Plug-in shelf support

11

Door stop, pivoting door

12

Rod

The material: stainless steelThe components: variable and adaptableThe functions: visual and expressive

MANET AMBIENT System

You have a picture in your head?MANET AMBIENT can supply the materialsand versatility needed to make it a reality.

System

1

26

2

3

4

8

7

8

12

9

11

5

10

1

52 11/06

Page 53: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

13

Single-point fixing /Single-point spacer fixing

14

Roller

15

Door stop, sliding door

16

Track rail

13

15

12

2

16

14

16

11/06 53

Page 54: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

The cover for the single-point fixing can be detachedby pressing the edge.

MANET AMBIENT Single-point fixings

Countersunk holes are required in the glass in order to ensureflush-mounting. The plastic clamping collar protects theglass from direct contact with the stainless steel fitting.The single-point fixing can be adjusted to offset tolerances.

Single-point fixings

1 2

3 4

ø24

ø24

ø20

M6

M6

Height of screw head max. 4

16

4

16

ø24

ø20

ø41

ø20

M8

64.5

16

1

3

Carcass/wall

Carcass/wall

Glass thickness

Glass thickness

Glass thickness

54 11/06

1Single-point fixingfor 6/8 mm glass, adjustableArt. No. 8.20.601.700.99

2Single-point fixingwith base flangefor 6/8 mm glass, adjustableArt. No. 8.20.611.700.99

3Single-point spacer fixingfor 6/8 mm glassArt. No. 8.20.620.700.99

4Support roseArt. No. 8.20.803.700.99

Ordering information

Page 55: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Countersunk holes fromthe front side

3 -0.2

ø24+0.2

ø18+0.2

90°

min.30

min.30

max.600

Recommended standard distance

Carcass /wall

Carcass /wall

Carcass /wall

Rose ensures enhanced load-bearing supportwhere the substructure may be problematic

Rose moves spacer fixing forward by 1 mmGlass is in flush facial contact or with an intermediate gap

Rotating the oval-shaped holepermits vertical and lateraladjustment of ± 1 mm oncethe front panel has beenmounted.

Single-point fixings are pre-fitted in the glass

Support rose

Spacers are attached separately to the wallor carcass

System combinationwith sliding door

Glass thickness

11/06 55

Page 56: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

MANET AMBIENT Rods / Track rails

Various rods, likewise made from stainless steel, can beused as track rails or pivots rods for sliding and pivotingdoors, and as stabilising components for connecting severalfurniture elements.The end faces of the rods are prepared according to theirapplication.

Rods /Track rails

Installation example:Track railSliding door

Installation example:Wall or ceilingconnector, doublesided

Installation example:Wall or ceilingconnector, single sided

Installation example:Pivoting door withinboard furniture hinge

max. 3000

ø20

ø20

ø20

ø20

M8

M8

M8

slotted

plane

max. 3000

max. 3000

max. 3000

56 11/06

Ordering information

Track rail / pivot rodplane/planeArt. No. 8.20.780.700.99

Track rail / pivot rodM8/M8Art. No. 8.20.781.700.99

Track rail / pivot rodplane/M8Art. No. 8.20.782.700.99

Insert rod

slotted / planeArt. No. 8.20.756.700.99

Page 57: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Ordering information

Wall/ceiling connectorArt. No. 8.20.760.700.99

Wall/ceiling connectors enable furniture items to beattached on one or two sides to walls and horizontalsurfaces as required.The flange is positioned on the ceiling or floor first.Next, the relevant rod is placed with a “pressure screw”against the flange (end face with M8 thread).The sleeve, which is already slid onto the rod, is thenscrewed to the flange.

Wall/ceiling connector

40

The rod must be shortenedby 28±3 mm when using thewall/ ceiling connector

28±3

Pressure screw (19 mm) Fixing nut Rod

ø20

ø30

M8 female threadM8 screw on site

The fixing nut can be moved freely along the rodWall/ ceiling flange

The fixing nut is screwed ontothe outside thread of thewall/ ceiling flange andprovides additional stability

The rod can be fixed between the wall/ ceiling flanges usingthe pressure screw (19 mm)

Wall/ceiling flange

11/06 57

Page 58: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Remove the rod with the pre-fixed connectors 1from the base flanges 5 .

Using the large M6 grub screw 4 , finally fixthe connectors 1 in the required position.

Having assembled the rod and connectors 1fit the assembly to the base flanges 5 andsecure with the M4 grub srews 3 .

MANET AMBIENT Connectors

Connectors

Connector, horizontal

Connector, vertical

Connector,sleeve-type

Connectordouble sided

Screw-fix the base flanges 5 in the required position.

Slide all connectors 1 loosely on the rod.

Fit the connectors 1 with the rod onto thebase flanges 5 .

Temporarily fix the connectors 1 to the rod usingthe small M3 grub screw 2 .

Mounting

1

3

4

5

2

There are three different connectors in two lengths,all of which are available as fixed or adjustable variantsdepending on their intended application. The verticalconnector is attached on or under a carcass element, andthe connector opening is required so that the doors can beslid along the rod.

Horizontal connectors are used to attach rods for the trackrail at the front of the carcass. Sleeve-type connectors areused with stabilising rods and with rods for pivoting doorswith an outboard furniture hinge.

58 11/06

Page 59: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Ordering information

1

Art. No. 8.20.700.700.99

2

Art. No. 8.20.701.700.99

3

Art. No. 8.20.705.700.99

4

Art. No. 8.20.706.700.99

5

Art. No. 8.20.710.700.99

6

Art. No. 8.20.711.700.99

7

Art. No. 8.20.715.700.99

8

Art. No. 8.20.716.700.99

9

Art. No. 8.20.720.700.99

10

Art. No. 8.20.721.700.99

11

Art. No. 8.20.725.700.99

12

Art. No. 8.20.726.700.99

13

Art. No. 8.20.727.700.99

Vertical connectors

Horizontal connectors

Connector, sleeve-type

Connector, double sided

36 mmfixed

50 mmfixed

36 mmadjustable ±2

50 mmadjustable ±3

36 mmfixed

50 mmfixed

36 mmadjustable ±2

50 mmadjustable ±3

321 4

5

6

7

8

36 mmfixed

50 mmfixed

36 mmadjustable ±2

50 mmadjustable ±3

36

16

ø 20

ø20

ø20

M6

16

ø20

ø20

ø20

M6

50

10

9

11

12

13

M6

M6

16

16ø20

ø20

ø20

36ø20

M6

1636

50

ø20

ø20

M6

16

50

M6

ø20

Adjustable angle

16 50

50

11/06 59

Page 60: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

MANET AMBIENT Pivoting doors

A feature of the outboard furniture hinge is its right-angleddesign. This is required in order to attach the hinge on theoutside of the carcass (in contrast to an inboard furniturehinge, which is attached inside the carcass, see page 62).A ring is provided within the hinge as a retainer. Insertedplain bearings allow the hinges to pivot about the fixed rod.The outboard furniture hinge permits a door opening angleof up to 270°. The glass thickness is down to a minimum of6 mm, the door weight amounts to a maximum of 40 kg.

Pivoting door, outboard furniture hinge

Hinge

Pivot rod Pivoting door

Carcass

50

50

(48) 36

5

ø 20

max.

270°

LsLs

24

ø 20

40

2 mm

max. 800 mm

Carcass

Carcass

Shelf

Pivoting door

Connector

Glass preparation see page 55

Ls (Hinge distances) = according to weight of pivoting door

Weight of pivoting door ≤ 40 kg Ls = 600 mm

Connector

60 03/07

Page 61: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Outboard furniture hingewith single-point fixingArt. No. 8.20.670.700.99

Outboard furniture hingewithout single-point fixingM6 female threadArt. No. 8.20.675.700.99

Rods and connectorssee page 56 - 59

Rotating the oval-shaped holepermits vertical and lateraladjustment of ± 1 mm oncethe pivoting door has beenmounted.

Hinge fixing device

Components of the pivoting door hingewith single-point fixings

Glass preparation see page 55

Glass

Hinge body

11/06 61

Ordering information

-

Page 62: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

MANET AMBIENT Pivoting doors

The inboard furniture hinge is attached inside the carcasswith the insert rod and the inserts.The mechanical design of the inserts enables them to beinstalled in the ready-assembled carcass.The construction allows a door opening angle of 90°.

The glass thickness is down to a minimum of 6 mm,the door weight amounts to a maximum of 40 kg.

Pivoting door, inboard furniture hinge

Furniturehinge

Insert rod

Pivoting door

Carcass

Bottom insert

Top eccentricinsert

50

50

17

6.5

12.6

(43.5)

TTheoreticaldimensionfrom

thebottom

endoftherod

13

13

26

ø 20

2

52 max.

90°

LsLs

24

19

10

ø 20

40

ø 25

2

max. 800 mm

Carcass

Carcass

Shelf

Pivoting door

Glasspreparationsee page 55

Insert rod

ø25

10

4

8

ø 20

ø20Ls (Hinge distances) = according to weight of

pivoting door

Weight of pivoting door ≤ 40 kg Ls = 600 mm

Carcassinsidedimension+6mm

max.3000

62 03/07

Page 63: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Inboard furniture hingewith single-point fixingArt. No. 8.20.660.700.99

Inboard furniture hingewithout single-point fixingArt. No. 8.20.665.700.99

Top eccentric insertArt. No. 8.20.745.700.99

Bottom insertArt. No. 8.20.746.700.99

Insert rodArt. No. 8.20.756.700.99

Installation of insert rod

Carcass preparations

Drill holes as per drawing.Using a wood screw, fix the eccentricinsert with the thin wall to the front inthe hole of the upper shelf.Place the anti-twist insert with the lugparallel with the front in the bottom holeof the bottom shelf and secure with the pins.Use a pin punch to drive thepins home.

Preparing the insert rod

Slide the hinges onto the insert rod.First insert the smooth/unmachined endof the insert rod fully into the top eccentricinsert. Swing the insert rod into thecarcass.Insert the slotted end so that it fits intothe bottom insert.Push the insert rod down with sufficienteffort to conceal the slot.

Installation of glass

Mount and align the glass door with thesingle-point fixings.(Assembly dimension see page 62).

Dismantling of the insert rod

The bottom insert is clamped to the rodand thus prevents unintentional lifting anddisengagement. In order to remove the rod,it has to be raised until a sharp-pointed tool(e.g. a flat-tipped screw-driver) can be placedbetween the insert and the insert rod.The insert can then be levered out.The rod can now be pulled forward anddown to remove it. The glass thickness isdown to a minimum of 6 mm, the doorweight amounts to a maximum of 40 kg.

Carcassinsidedimension

L

Carcass

Installation of insert rod Dismantling of insert rod

Top bore

Carcass

ø20

ø25

13

13

15

13

L = Inside dimension+ 6 mm (max. 3000 mm)

Bottom bore

1

23

1

2

3

03/07 63

Ordering information

Page 64: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

MANET AMBIENT Sliding doors

In the MANET AMBIENT system, the roller is attached directlyto the glass. It is aligned via oval-shaped holes in thesingle-point fixing, which is provided with a cap, as are allsingle-point fixings in the system. Accessories such as stopsand brushes complement the range of components.

The glass thickness is down to a minimum of 6 mm,the door weight amounts to a maximum of 40 kg.

Sliding doors

Sliding door Sliding door

Insert withvertical connector

Connector

Insert withhorizontal connector

14.5

19

ø41

47.5

27

min.30

14.5

19

ø41

47.5

27

min.30

Carcass

Sliding door

*2.5

Using the recessedpull grip (Art. No.8.20.900.700.99)the measurementmust be longer than*2.7 mm(see page 70)

Connector

Carcass Sliding door

64 03/07

Page 65: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Ordering information

Roller withsingle-point fixingArt. No. 8.20.650.700.99

Connectordistances

Slotted withbrush profile Roller without single-point

fixing, M6-thread

Art. No. 8.20.655.700.99

Door stopArt. No. 8.20.790.700.99

Rods and connectorssee page 56 - 59

Before installation, slidestop over the rod (freelymovable, clamped usingM5 grub screw)

Slotted carcass withbrush profile

Door stop

Lv

Lh

9

9

ø202

8

12

Installation examples

Glass thickness

Glass thickness +11

Ls (Hinge distances) = according to weight of sliding door

Weight of sliding door ≤ 40 kg Lv/Lh = 600 mm

08/07 65

Page 66: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

66 07/06

MANET Accessories

Page 67: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Inhalt

Accessories 68Accessoriesfor AMBIENT 69

Accessories

Page 68: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Installation tools /accessories

Ordering information

Clip-on cover forsingle-point fixingwith spring, 5 piecesArt. No. 8.29.217.700.99

Assembling tool forMANET single-point fixing(can also be used as attach-ment for torque wrench)Art. No. 8.21.137.000.99

Sample caseArt. No. 8.21.995.000.99

MANET Accessories

68 11/06

Page 69: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Ordering information

11/06 69

Shelf support/door stop, sliding doorArt. 8.20.790.700.99

Freely movable,clamped using M5 set screw

Freely movable,clamped using M5 set screw

Shelf support, variableArt. 8.20.801.700.99

Plug-in shelf support/door stop, pivoting doorArt. 8.20.802.700.99

Support for detachable shelf

Swivelling range180°, adjustable

Carcass

Rod

ø20

ø20ø5

ø5

ø 20

28

28

21

9

ø 20

28

9

15.5

3

28 28

21

21

33

8

Plug-in shelf supportroundArt. 8.20.815.700.9925

10

~3

min. 10

min. 10

Page 70: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

Ordering information

70 11/06

Flexible head pin wrenchSize ø 20 - ø 35with 2.5 mm pinArt. 8.20.991.000.99

Recessed pull gripfor glassArt. 8.20.900.700.99

Recessed pull gripfor timberArt. 8.20.901.700.99

Insert halves with coating of assembly adhesive

* Dimension greater than glass to carcass distance for sliding doors, see page 64

Special wrench 20 mmArt. 8.20.990.000.99

Recessed pull grip

Special tools for fitting a roller with single-point fixing

Glass preparation

ø41

35

2.7

2.7*

8

During fitting, the surface of this specialthin wrench can be held against the rollerto ensure that the single-point fixing isfirmly screwed down

With the flexible head pin wrenchthe fixing nut of the wall/ ceilingconnector can be screwed

MANET Accessories

Page 71: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

71 12/07

Subject to change without notice.

For practical planning, please use our drawings DORMA-Glas DETAIL.

For planning of intelli-gent glass solutionswe offer you several

planning tools which allow youto create secure and professio-nal solutions for any kinds ofglass doors and toughend glassassemblies.

The planning tools DGES andMANET COMPACT enable youto prepare designs and costcalculations quickly, reliablyand professionally. The soft-ware provides you with allnecessary documentation suchas dimensioned technicaldrawings, glass sizes and pre-paration measures.

Your benefits:• Easy to operate• Professional and error-freepreparation of offers

• Rapid response to incomingrequests for quotations

• Highly reduced planningcosts for time and moneysavings

DGES Fittings(for internal doors and toug-hend glass assemblies),Art. No. 800.51.249.6.32DGES HSW (forhorizontal sliding walls),Art. No. 800.51.247.6.32DGES Showers(for glass shower cubicles),Art. No. 600.51.600.9.03MANET COMPACT planningtool(for MANET pivoting andsliding doors),Art. No. 800.51.329.6.32

Planning tool

Page 72: Technicalmanual forordering andinstallation DORMA MA NET€¦ · Sliding Pivoting Retention. DORMA MANETCONCEPT. Content Single-pointfixing 8 Connectionsystem 10 Pivotingdoorsystem

WN 800.51.221.6.32 · 02/08 · GB · BD · 3 · 12/07

DORMA GlasTec GmbHLeonardo-da-Vinci-Weg 6 - 8D-32760 DetmoldTel. +49 5231 308030Fax +49 5231 3080310www.dorma-glastec.de