Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
Technical Specifications
336 GCHydraulic Excavator
Engine
Engine Model Cat® C7.1 ACERT™
Net Power – ISO 9249 204 kW
Net Power – SAE J1349 204 kW
Gross Power – ISO 14396 205 kW
Bore 105 mm
Stroke 135 mm
Displacement 7.1 L
• Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
• Recommended for use up to 3300 m altitude with engine power derate above 2300 m.
• Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator.
• Rating at 2,200 rpm.
Engine rpm
Operation 1,750 rpm
Travel 1,750 rpm
Swing Mechanism
Swing Speed 8.74 rpm
Maximum Swing Torque 137 kN·m
Weights
Operating Weight 35 500 kg
• Long undercarriage, Reach boom, R3.2DB stick, HD 1.88 m3 bucket, 700 mm triple grouser shoes, and 6.8 mt counterweight.
Track
Standard Track Shoes Width 700 mm
Optional Track Shoes Width 600 mm
Optional Track Shoes Width 850 mm
Number of Shoes (each side) 49
Number of Track Rollers (each side) 8
Number of Carrier Rollers (each side) 2
Drive
Maximum Gradeability 35°/70%
Maximum Travel Speed 4.7 km/h
Maximum Drawbar Pull 296 kN
Hydraulic System
Main System – Maximum Flow – Implement 560 L/min (280 × 2 pumps)
Maximum Pressure – Equipment – Implement 35 000 kPa
Maximum Pressure – Travel 35 000 kPa
Maximum Pressure – Swing 28 000 kPa
Boom Cylinder – Bore 145 mm
Boom Cylinder – Stroke 1440 mm
Stick Cylinder – Bore 160 mm
Stick Cylinder – Stroke 1738 mm
DB Bucket Cylinder – Bore 145 mm
DB Bucket Cylinder – Stroke 1151 mm
2
Service Refill Capacities
Fuel Tank Capacity 600 L
Cooling System 39 L
Engine Oil (with filter) 25 L
Swing Drive (each) 18 L
Final Drive (each) 8 L
Hydraulic System (including tank) 373 L
Hydraulic Tank 161 L
DEF Tank 50 L
Standards
Brakes ISO 10265:2008
Cab/FOGS ISO 10262:1998
Cab/ROPS ISO 12117-2:2008
Sound Performance
ISO 6395 (external) 105 dB(A)
ISO 6396 (inside cab) 72 dB(A)
• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Air Conditioning System
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1430 metric tonnes.
336 GC Hydraulic Excavator Specifications
Operating Weights and Ground Pressures
600 mm Triple Grouser Shoes
700 mm Triple Grouser Shoes
850 mm Triple Grouser Shoes
WeightGround
Pressure WeightGround
Pressure WeightGround
Pressurekg kPa kg kPa kg kPa
6.8 mt Counterweight + Long Undercarriage Base MachineReach Boom + R3.2 m DB Stick + 1.88 m3 HD Bucket 35 100 72.7 35 500 62.9 36 400 56.4
Reach Boom + R2.8 m DB Stick + 1.88 m3 HD Bucket 35 000 72.5 35 400 62.7 36 300 56.2
6.8 mt Counterweight + Long Narrow Undercarriage Base MachineReach Boom + R3.2 m DB Stick + 1.88 m3 HD Bucket 35 000 72.4 35 400 62.7
Reach Boom + R2.8 m DB Stick + 1.88 m3 HD Bucket 34 900 72.2 35 300 62.5
All operating weights include a 90% fuel tank with 75 kg operator.
3
336 GC Hydraulic Excavator Specifications
Major Component Weights
kgBase machine with 6.8 mt counterweight, standard swing frame, base frame with HD track rollers and carrier rollers for Long undercarriage
23 840
Base machine with 6.8 mt counterweight, standard swing frame, base frame with HD track rollers and carrier rollers for Long Narrow undercarriage
23 710
Track Shoes:
600 mm Width, 11 mm Thick, Triple Grouser 4090
700 mm Width, 11 mm Thick, Triple Grouser 4450
850 mm Width, 13 mm Thick, Triple Grouser 5300
Two Boom Cylinders 560
Weight of 90% Fuel Tank and 75 kg Operator 550
Counterweight:
6.8 mt Counterweight 6800
Swing Frames:
Standard Swing Frame 3160
Undercarriage:
Base Frame with HD Track Rollers and Carrier Rollers for Long Undercarriage 8400
Base Frame with HD Track Rollers and Carrier Rollers for Long Narrow Undercarriage 8270
Boom (including lines, pins, stick cylinder):
Reach Boom 6.5 m 3140
Sticks (including lines, pins, bucket cylinder, bucket linkage):
Reach Stick R2.8DB 1650
Reach Stick R3.2DB 1760
Buckets (without linkage):
1.88 m3 HD 1770
Quick Couplers:
CW Dedicated QC 480
Pin Grabber QC 700
336 GC Hydraulic Excavator Specifications
4
DimensionsAll dimensions are approximate and may vary depending on bucket selection.
43
78
2
5
1
6
109
Boom Option Reach Boom 6.5 m
Stick Options Reach StickR3.2DB R2.8DB
1 Machine Height:Cab Height 3170 mm 3170 mm
FOGS Height 3310 mm 3310 mm
Handrails Height 3160 mm 3160 mm
With Boom/Stick/Bucket Installed 3490 mm 3670 mm
With Boom/Stick Installed 3330 mm 3450 mm
With Boom Installed 2880 mm 2880 mm
With Boom/Stick/Bucket Installed (with auxiliary lines) 3530 mm 3680 mm
With Boom/Stick Installed (with auxiliary lines) 3400 mm 3500 mm
With Boom Installed (with auxiliary lines) 2970 mm 2970 mm
2 Machine Length:With Boom/Stick/Bucket Installed 11 180 mm 11 220 mm
With Boom/Stick Installed 11 140 mm 11 190 mm
With Boom Installed 9960 mm 9960 mm
With Boom/Stick/Bucket Installed (with auxiliary lines) 11 180 mm 11 220 mm
With Boom/Stick Installed (with auxiliary lines) 11 140 mm 11 190 mm
With Boom Installed (with auxiliary lines) 10 010 mm 10 010 mm
3 Upperframe Width without Walkways 3030 mm 3030 mm4 Tail Swing Radius 3530 mm 3530 mm5 Counterweight Clearance 1250 mm 1250 mm6 Ground Clearance 510 mm 510 mm7 Length to Center of Rollers 4040 mm 4040 mm8 Track Length 5030 mm 5030 mm9 Track Gauge – Extended (Long undercarriage) 2590 mm 2590 mm
Extended (Long Narrow undercarriage) 2390 mm 2390 mm
10 Track Width/Undercarriage Width (with steps/without steps):600 mm Shoes 3190 mm 3190 mm
700 mm Shoes 3290 mm 3290 mm
850 mm Shoes 3440 mm 3440 mm
Bucket Type HD HD
Bucket Capacity 1.88 m3 1.88 m3
Bucket Tip Radius 1790 mm 1790 mm
5
336 GC Hydraulic Excavator Specifications
Working Ranges and ForcesAll dimensions are approximate and may vary depending on bucket selection.
R2.8DB
R3.2DB
0
1
2
3
4
5
6
7
8
9
10
11
12
6
7
5
8
4
3
2
1
0123456789101213 11 –1 Meters
Meters
2
3
1
7
4
5
6
Boom Option Reach Boom 6.5 m
Stick Options Reach StickR3.2DB R2.8DB
1 Maximum Digging Depth 7530 mm 7130 mm2 Maximum Reach at Ground Line 11 060 mm 10 760 mm3 Maximum Cutting Height 10 300 mm 10 370 mm4 Maximum Loading Height 7070 mm 7070 mm5 Minimum Loading Height 2570 mm 2970 mm6 Maximum Depth Cut for 2440 mm Level Bottom 7370 mm 6970 mm7 Maximum Vertical Wall Digging Depth 5710 mm 5680 mmBucket Digging Force (SAE) 171 kN 171 kN
Bucket Digging Force (ISO) 196 kN 196 kN
Stick Digging Force (SAE) 142 kN 158 kN
Stick Digging Force (ISO) 147 kN 164 kN
Bucket Type HD HD
Bucket Capacity 1.88 m3 1.88 m3
Bucket Tip Radius 1790 mm 1790 mm
6
336 GC Hydraulic Excavator Specifications
Reach Boom Lift Capacities – Counterweight: 6.8 mt – without BucketLong Undercarriage
3.2 m 6.5 m 850 mm Triple Grouser Shoes
R3.2DB (GC)
2590 mm 4040 mm
3000 mm 4500 mm 6000 mm 7500 mm 9000 mm
mm
7500 mm kg *6800 *6800 *5700 *5700 77006000 mm kg *7400 *7400 *5550 *5550 85804500 mm kg *11 300 *11 300 *9050 *9050 *7950 7350 *6550 5500 *5550 5350 91303000 mm kg *14 300 *14 300 *10 500 9750 *8650 7050 *7650 5350 *5800 5000 94101500 mm kg *16 450 13 800 *11 750 9250 *9350 6800 *7950 5200 *6200 4850 9440
0 mm kg *17 150 13 400 *12 450 8900 *9800 6600 8050 5100 *6900 4950 9220–1500 mm kg *11 700 *11 700 *16 800 13 300 *12 500 8800 *9800 6500 *8050 5300 8750–3000 mm kg *18 450 *18 450 *15 550 13 450 *11 800 8800 *9150 6500 *8350 6050 7960–4500 mm kg *17 450 *17 450 *13 150 *13 150 *9950 9050 *8350 7750 6750
Reach Boom Lift Capacities – Counterweight: 6.8 mt – without BucketLong Undercarriage
3.2 m 6.5 m 600 mm Triple Grouser Shoes
R3.2DB (GC)
2590 mm 4040 mm
3000 mm 4500 mm 6000 mm 7500 mm 9000 mm
mm
7500 mm kg *6800 *6800 *5700 *5700 77006000 mm kg *7400 7350 *5550 *5550 85804500 mm kg *11 300 *11 300 *9050 *9050 *7950 7100 *6550 5300 *5550 5200 91303000 mm kg *14 300 *14 300 *10 500 9450 *8650 6850 *7650 5200 *5800 4850 94101500 mm kg *16 450 13 400 *11 750 8950 *9350 6550 7900 5050 *6200 4700 9440
0 mm kg *17 150 13 000 *12 450 8650 *9800 6350 7800 4950 *6900 4800 9220–1500 mm kg *11 700 *11 700 *16 800 12 900 *12 500 8500 *9800 6300 *8050 5150 8750–3000 mm kg *18 450 *18 450 *15 550 13 000 *11 800 8550 *9150 6300 *8350 5850 7960–4500 mm kg *17 450 *17 450 *13 150 *13 150 *9950 8750 *8350 7500 6750
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
7
336 GC Hydraulic Excavator Specifications
Reach Boom Lift Capacities – Counterweight: 6.8 mt – without BucketLong Undercarriage
3.2 m 6.5 m 700 mm Triple Grouser Shoes
R3.2DB (GC)
2590 mm 4040 mm
3000 mm 4500 mm 6000 mm 7500 mm 9000 mm
mm
7500 mm kg *6800 *6800 *5700 *5700 77006000 mm kg *7400 *7400 *5550 *5550 85804500 mm kg *11 300 *11 300 *9050 *9050 *7950 7200 *6550 5350 *5550 5250 91303000 mm kg *14 300 *14 300 *10 500 9550 *8650 6900 *7650 5250 *5800 4900 94101500 mm kg *16 450 13 500 *11 750 9050 *9350 6650 *7950 5100 *6200 4750 9440
0 mm kg *17 150 13 100 *12 450 8700 *9800 6450 7900 5000 *6900 4850 9220–1500 mm kg *11 700 *11 700 *16 800 13 050 *12 500 8600 *9800 6350 *8050 5200 8750–3000 mm kg *18 450 *18 450 *15 550 13 150 *11 800 8600 *9150 6400 *8350 5900 7960–4500 mm kg *17 450 *17 450 *13 150 *13 150 *9950 8850 *8350 7550 6750
Reach Boom Lift Capacities – Counterweight: 6.8 mt – without BucketLong Undercarriage
2.8 m 6.5 m 850 mm Triple Grouser Shoes
R2.8DB (GC)
2590 mm 4040 mm
3000 mm 4500 mm 6000 mm 7500 mm 9000 mm
mm
7500 mm kg *7300 *7300 73406000 mm kg *8450 *8450 *7850 7500 *7000 6400 82504500 mm kg *12 250 *12 250 *9600 *9600 *8300 7300 *7000 5650 88203000 mm kg *15 200 14 500 *10 950 9650 *9000 7050 *7950 5350 *7200 5250 91101500 mm kg *14 050 13 700 *12 100 9250 *9600 6800 *8150 5250 *7700 5150 9140
0 mm kg *16 550 13 450 *12 650 8950 *9950 6650 8250 5250 8920–1500 mm kg *10 900 *10 900 *16 600 13 450 *12 500 8850 *9850 6550 *8450 5650 8420–3000 mm kg *19 700 *19 700 *15 050 13 600 *11 600 8950 *8750 6650 *8550 6550 7600–4500 mm kg *15 750 *15 750 *12 250 *12 250 *9100 *9100 *8300 *8300 6330
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
8
336 GC Hydraulic Excavator Specifications
Reach Boom Lift Capacities – Counterweight: 6.8 mt – without BucketLong Undercarriage
2.8 m 6.5 m 600 mm Triple Grouser Shoes
R2.8DB (GC)
2590 mm 4040 mm
3000 mm 4500 mm 6000 mm 7500 mm 9000 mm
mm
7500 mm kg *7300 *7300 73406000 mm kg *8450 *8450 *7850 7300 *7000 6200 82504500 mm kg *12 250 *12 250 *9600 *9600 *8300 7100 *7000 5500 88203000 mm kg *15 200 14 100 *10 950 9400 *9000 6850 *7950 5200 *7200 5100 91101500 mm kg *14 050 13 300 *12 100 8950 *9600 6600 7950 5100 *7700 5000 9140
0 mm kg *16 550 13 050 *12 650 8700 *9950 6400 8000 5100 8920–1500 mm kg *10 900 *10 900 *16 600 13 050 *12 500 8600 *9850 6350 *8450 5500 8420–3000 mm kg *19 700 *19 700 *15 050 13 200 *11 600 8650 *8750 6450 *8550 6350 7600–4500 mm kg *15 750 *15 750 *12 250 *12 250 *9100 8950 *8300 *8300 6330
Reach Boom Lift Capacities – Counterweight: 6.8 mt – without BucketLong Undercarriage
2.8 m 6.5 m 700 mm Triple Grouser Shoes
R2.8DB (GC)
2590 mm 4040 mm
3000 mm 4500 mm 6000 mm 7500 mm 9000 mm
mm
7500 mm kg *7300 *7300 73406000 mm kg *8450 *8450 *7850 7350 *7000 6250 82504500 mm kg *12 250 *12 250 *9600 *9600 *8300 7150 *7000 5550 88203000 mm kg *15 200 14 200 *10 950 9500 *9000 6900 *7950 5250 *7200 5150 91101500 mm kg *14 050 13 450 *12 100 9050 *9600 6650 8000 5150 *7700 5050 9140
0 mm kg *16 550 13 150 *12 650 8750 *9950 6500 8050 5150 8920–1500 mm kg *10 900 *10 900 *16 600 13 150 *12 500 8700 *9850 6400 *8450 5550 8420–3000 mm kg *19 700 *19 700 *15 050 13 300 *11 600 8750 *8750 6500 *8550 6400 7600–4500 mm kg *15 750 *15 750 *12 250 *12 250 *9100 9050 *8300 *8300 6330
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
9
336 GC Hydraulic Excavator Specifications
Reach Boom Lift Capacities – Counterweight: 6.8 mt – without BucketLong Narrow Undercarriage
3.2 m 6.5 m 600 mm Triple Grouser Shoes
R3.2DB (GC)
2390 mm 4040 mm
3000 mm 4500 mm 6000 mm 7500 mm 9000 mm
mm
7500 mm kg *6800 *6800 *5700 *5700 77006000 mm kg *7400 6800 *5550 5400 85804500 mm kg *11 300 *11 300 *9050 *9050 *7950 6600 *6550 4900 *5550 4800 91303000 mm kg *14 300 13 050 *10 500 8700 *8650 6300 *7650 4800 *5800 4450 94101500 mm kg *16 450 12 150 *11 750 8200 *9350 6050 7900 4650 *6200 4350 9440
0 mm kg *17 150 11 750 *12 450 7900 *9800 5850 7800 4550 *6900 4400 9220–1500 mm kg *11 700 *11 700 *16 800 11 700 *12 500 7750 *9800 5750 *8050 4700 8750–3000 mm kg *18 450 *18 450 *15 550 11 800 *11 800 7800 *9150 5800 *8350 5400 7960–4500 mm kg *17 450 *17 450 *13 150 12 100 *9950 8000 *8350 6850 6750
Reach Boom Lift Capacities – Counterweight: 6.8 mt – without BucketLong Narrow Undercarriage
3.2 m 6.5 m 700 mm Triple Grouser Shoes
R3.2DB (GC)
2390 mm 4040 mm
3000 mm 4500 mm 6000 mm 7500 mm 9000 mm
mm
7500 mm kg *6800 *6800 *5700 *5700 77006000 mm kg *7400 6850 *5550 5450 85804500 mm kg *11 300 *11 300 *9050 *9050 *7950 6650 *6550 4950 *5550 4800 91303000 mm kg *14 300 13 150 *10 500 8750 *8650 6350 *7650 4800 *5800 4500 94101500 mm kg *16 450 12 250 *11 750 8300 *9350 6100 7950 4700 *6200 4350 9440
0 mm kg *17 150 11 850 *12 450 7950 *9800 5900 7850 4600 *6900 4450 9220–1500 mm kg *11 700 *11 700 *16 800 11 800 *12 500 7850 *9800 5800 *8050 4750 8750–3000 mm kg *18 450 *18 450 *15 550 11 900 *11 800 7850 *9150 5850 *8350 5450 7960–4500 mm kg *17 450 *17 450 *13 150 12 200 *9950 8050 *8350 6950 6750
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
10
336 GC Hydraulic Excavator Specifications
Reach Boom Lift Capacities – Counterweight: 6.8 mt – without BucketLong Narrow Undercarriage
2.8 m 6.5 m 600 mm Triple Grouser Shoes
R2.8DB (GC)
2390 mm 4040 mm
3000 mm 4500 mm 6000 mm 7500 mm 9000 mm
mm
7500 mm kg *7300 7050 73406000 mm kg *8450 *8450 *7850 6750 *7000 5750 82504500 mm kg *12 250 *12 250 *9600 9150 *8300 6550 *7000 5050 88203000 mm kg *15 200 12 800 *10 950 8650 *9000 6300 *7950 4800 *7200 4700 91101500 mm kg *14 050 12 050 *12 100 8200 *9600 6050 7900 4700 *7700 4600 9140
0 mm kg *16 550 11 800 *12 650 7950 *9950 5900 7950 4650 8920–1500 mm kg *10 900 *10 900 *16 600 11 800 *12 500 7850 *9850 5850 *8450 5050 8420–3000 mm kg *19 700 *19 700 *15 050 11 950 *11 600 7900 *8750 5900 *8550 5850 7600–4500 mm kg *15 750 *15 750 *12 250 *12 250 *9100 8200 *8300 7700 6330
Reach Boom Lift Capacities – Counterweight: 6.8 mt – without BucketLong Narrow Undercarriage
2.8 m 6.5 m 700 mm Triple Grouser Shoes
R2.8DB (GC)
2390 mm 4040 mm
3000 mm 4500 mm 6000 mm 7500 mm 9000 mm
mm
7500 mm kg *7300 7100 73406000 mm kg *8450 *8450 *7850 6800 *7000 5800 82504500 mm kg *12 250 *12 250 *9600 9250 *8300 6600 *7000 5100 88203000 mm kg *15 200 12 950 *10 950 8700 *9000 6350 *7950 4850 *7200 4750 91101500 mm kg *14 050 12 200 *12 100 8250 *9600 6100 8000 4750 *7700 4600 9140
0 mm kg *16 550 11 950 *12 650 8000 *9950 5950 8050 4700 8920–1500 mm kg *10 900 *10 900 *16 600 11 900 *12 500 7900 *9850 5900 *8450 5100 8420–3000 mm kg *19 700 *19 700 *15 050 12 050 *11 600 8000 *8750 6000 *8550 5900 7600–4500 mm kg *15 750 *15 750 *12 250 *12 250 *9100 8250 *8300 7750 6330
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
11
336 GC Hydraulic Excavator Specifications
Bucket Specifications and Compatibility
Undercarriage Long Long Narrow
Counterweight 6.8 mt
Linkage
Width Capacity Weight Fill Reach Boom
mm m3 kg % R2.8 R3.2 R2.8 R3.2
Pin-On (No Quick Coupler)
General Duty DB 1350 1.64 1181 100
DB 1500 1.88 1286 100
DB 1650 2.12 1361 100
DB 1800 2.36 1465 100 X X X XHeavy Duty DB 1350 1.64 1450 100
DB 1500 1.88 1545 100
DB 1650 2.12 1677 100
DB 1800 2.36 1774 100 X X X XSevere Duty DB 1650 2.15 1802 90
Heavy Duty TB 1650 2.41 2220 100 Severe Duty – V Edge TB 1350 1.87 2053 90
TB 1650 2.41 2367 90 Maximum load with pin-on (payload + bucket) kg 5330 5020 4780 4480
With Cat Pin Grabber Coupler
General Duty DB 1350 1.64 1181 100
DB 1500 1.88 1286 100
DB 1650 2.12 1361 100
DB 1800 2.36 1465 100
Heavy Duty DB 1350 1.64 1450 100
DB 1500 1.88 1545 100
DB 1650 2.12 1677 100
DB 1800 2.36 1774 100 XSevere Duty DB 1650 2.15 1802 90
Heavy Duty TB 1650 2.41 2220 100 Severe Duty – V Edge TB 1350 1.87 2053 90
TB 1650 2.41 2367 90 Maximum load with coupler (payload + bucket) kg 4633 4325 4082 3785
The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled.Capacity based on ISO 7451:2007.Bucket weight with General Duty tips.
Maximum Material Density:2100 kg/m31800 kg/m31500 kg/m31200 kg/m3900 kg/m3
X Not Recommended
Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick.
(continued on next page)
12
336 GC Hydraulic Excavator Specifications
Bucket Specifications and Compatibility (continued)
Undercarriage Long Long Narrow
Counterweight 6.8 mt
Linkage
Width Capacity Weight Fill Reach Boom
mm m3 kg % R2.8 R3.2 R2.8 R3.2
With CW Quick Coupler
General Duty DB 1500 1.88 1256 100
DB 1650 2.12 1334 100
Heavy Duty DB 1350 1.64 1419 100
DB 1500 1.88 1516 100
DB 1650 2.12 1650 100
Severe Duty DB 1650 2.15 1775 90
Ditch Cleaning DB 2200 2.40 1346 100
DB 1800 1.96 1163 100
DB 2000 2.18 1250 100
Heavy Duty TB 1650 2.41 2120 100 Severe Duty TB 1650 2.41 2267 90
Maximum load with coupler (payload + bucket) kg 4856 4547 4305 4008
With CWS Quick Coupler
General Duty DB 1200 1.40 1026 100
DB 1650 2.12 1227 100
DB 1800 2.36 1372 100
Heavy Duty DB 1500 1.88 1461 100
DB 1650 2.12 1581 100
Severe Duty DB 1650 2.15 1706 90
Ditch Cleaning DB 2400 2.04 1266 100
DB 2200 2.40 1347 100
Heavy Duty TB 1650 2.41 2052 100 Severe Duty TB 1350 1.87 1898 90
TB 1650 2.41 2199 90 Maximum load with coupler (payload + bucket) kg 4886 4577 4335 4038
The above loads are in compliance with hydraulic excavator standard EN474-5:2006 + A3:2013, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled.Capacity based on ISO 7451:2007.Bucket weight with General Duty tips.
Maximum Material Density:2100 kg/m31800 kg/m31500 kg/m31200 kg/m3900 kg/m3
X Not Recommended
Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick.
13
336 GC Hydraulic Excavator Specifications
Attachments Offering Guide
PIN-ON ATTACHMENTSUndercarriage Long Long NarrowBoom Type Reach Boom Reach BoomStick Sizes 2.8 m 3.2 m 2.8 m 3.2 mHydraulic Hammers H140Es
H140 GCs
H160Es
Multi-Processors MP324 CC Jaw
MP324 D Jaw
MP324 P Jaw
MP324 S Jaw
MP324 TS Jaw
MP324 U Jaw
MP332 CC Jaw
MP332 D Jaw
MP332 P Jaw
MP332 S Jaw
MP322 TS Jaw *
MP332 U Jaw
Crushers P325
P335 *
Pulverizers P225
P235
Demolition and Sorting Grapples G325B
G330
Mobile Scrap and Demolition Shears S3035
Compactors (Vibratory Plate) CVP110
Clamshell Grapples CTV20
CTV30
Orange Peel Grapples
Rippers
Cat Pin Grabber Couplers
Dedicated Quick Couplers
*Working range front only
(continued on next page)
14
336 GC Hydraulic Excavator Specifications
Attachments Offering Guide (continued)
CAT PIN GRABBER COUPLER ATTACHMENTSUndercarriage Long Long NarrowBoom Type Reach Boom Reach BoomStick Sizes 2.8 m 3.2 m 2.8 m 3.2 mHydraulic Hammers H140Es
H140 GCs
H160Es *
Multi-Processors MP324 CC Jaw
MP324 D Jaw
MP324 P Jaw
MP324 S Jaw
MP324 TS Jaw
MP324 U Jaw
MP332 CC Jaw *
MP332 D Jaw * *
MP332 P Jaw *
MP332 S Jaw *
MP332 TS Jaw *
MP332 U Jaw *
Crushers P325
P335 *
Pulverizers P225
P235 *
Demolition and Sorting Grapples G325B *
G330 * *
Mobile Scrap and Demolition Shears S3035 *
Compactors (Vibratory Plate) CVP110
Rippers
*Working range front only
(continued on next page)
15
336 GC Hydraulic Excavator Specifications
Attachments Offering Guide (continued)
CW-45 DEDICATED COUPLER ATTACHMENTSUndercarriage Long Long NarrowBoom Type Reach Boom Reach BoomStick Sizes 2.8 m 3.2 m 2.8 m 3.2 mHydraulic Hammers H140Es
H160Es *
Multi-Processors MP324 CC Jaw
MP324 D Jaw
MP324 P Jaw
MP324 S Jaw
MP324 TS Jaw
MP324 U Jaw
MP332 CC Jaw *
MP332 D Jaw * *
MP332 P Jaw * *
MP332 S Jaw
MP332 TS Jaw *
MP332 U Jaw * *
Crushers P325
P335 *
Pulverizers P225
P235 *
Demolition and Sorting Grapples G325B
G330 * *
Mobile Scrap and Demolition Shears S3035
Compactors (Vibratory Plate) CVP110
Rippers
*Working range front only
(continued on next page)
Attachments Offering Guide (continued)
CW-45s DEDICATED COUPLER ATTACHMENTSUndercarriage Long Long NarrowBoom Type Reach Boom Reach BoomStick Sizes 2.8 m 3.2 m 2.8 m 3.2 mHydraulic Hammers H140Es
H160Es *
Multi-Processors MP324 CC Jaw
MP324 D Jaw
MP324 P Jaw
MP324 S Jaw
MP324 TS Jaw
MP324 U Jaw
MP332 CC Jaw *
MP332 D Jaw * *
MP332 P Jaw *
MP332 S Jaw *
MP332 TS Jaw * *
MP332 U Jaw *
Crushers P325
P335 *
Pulverizers P225
P235 *
Demolition and Sorting Grapples G325B
G330 * *
Mobile Scrap and Demolition Shears S3035 *
Compactors (Vibratory Plate) CVP110
Rippers
*Working range front only
BOOM-MOUNTED ATTACHMENTSUndercarriage Long Long NarrowBoom Type Reach Boom Reach BoomMobile Scrap and Demolition Shears S2090
S3050
S3070 *
*Working range front only
16
336 GC Hydraulic Excavator Specifications
17
336 GC Standard and Optional Equipment
Standard and Optional EquipmentStandard and optional equipment may vary. Consult your Cat dealer for details.
Standard Optional
ENGINEC7.1 Tier 4 diesel engine
Two selectable modes: Power, Smart
One-touch low idle with automatic engine speed control
52° C (126° F) high-ambient cooling capacity
–18° C (0° F) cold start capability
Double element air filter with integrated precleaner
Single plane three horizontal cooling system
Dual stage four micron main filter and 10 micron primary filter with water separator and water separator indicator switch
Biodiesel capability up to B20
HYDRAULIC SYSTEMSmart Boom
Boom and stick regeneration circuit
Electronic main control valve
Automatic hydraulic oil warm up
Bio hydraulic oil capability
Combined two-way auxiliary circuit with direct return
Medium-pressure auxiliary circuit
Quick coupler circuit for Cat Pin Grabber and CW Dedicated
Standard Optional
UNDERCARRIAGE AND STRUCTURESLong undercarriage
Long Narrow undercarriage
Towing eye on base frame
Track guiding guard, full length
Track guiding guard, center
Bottom guard
Travel motor guard
Grease lubricated track
Swing frame
Swing bearing
Base frame with standard rollers
6.8 mt counterweight
600 mm triple grouser track shoes
700 mm triple grouser track shoes
850 mm triple grouser track shoes
BOOMS, STICKS AND LINKAGES6.5 m reach boom
2.8 m stick
3.2 m stick
Bucket linkage, DB family without lifting eye
(continued on next page)
18
336 GC Standard and Optional Equipment
Standard Optional
ELECTRICAL SYSTEMMaintenance-free 1,000 CCA batteries (×2)
Centralized electrical disconnect switch
LED chassis light, LH and RH boom lights, cab lights
CAT CONNECT TECHNOLOGYCat Product Link™
SERVICE AND MAINTENANCEGrouped location of engine oil and fuel filters
Scheduled Oil Sampling (S·O·SSM) ports
Electric refueling pump with automatic shutoff
Standard Optional
SAFETY AND SECURITYCaterpillar One Key security system
Lockable external tool/storage box
Lockable door, fuel, and hydraulic tank locks
Lockable fuel drain compartment
Service platform with anti-skid plate and recessed bolts
RH handrail and hand hold (ISO 2867:2011 compliant)
Signaling/warning horn
Ground-level secondary engine shutoff switch
Rear and side-view cameras
Boom lowering check valve Stick lowering check valve
Standard and Optional Equipment (continued)Standard and optional equipment may vary. Consult your Cat dealer for details.
336 GC Attachments
CAB• Radial lower wiper• Polycarbonate roof hatch• P5A glass for demolition• RH electrical pedal for tool control
SAFETY AND SECURITY• Bluetooth® receiver kit• Bluetooth key fob
GUARDS• Standard swivel guard• Falling object guard system• Mesh guard full front
Dealer Installed Kit and AttachmentsAttachments may vary. Consult your Cat dealer for details.
336 GC Cab Options
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com
© 2019 CaterpillarAll rights reserved
Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Yellow,” the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
AEXQ2236-02 (04-2019) Replaces AEXQ2236-01
Build Number: 07A (Europe)
Cab Options
ComfortROPS, standard sound suppression
High-resolution 203 mm LCD touchscreen monitor
Automatic bi-level air conditioner
Jog dial and shortcut keys for monitor control
Keyless push-to-start engine control
Height-adjustable console, three steps with tool
Mechanically adjustable seat suspension
51 mm seat belt
Fixed left-side console
Bluetooth integrated radio with USB ports
12V DC outlets (×2)
Document storage
Cup and bottle holders
Openable two-piece front window
Upper radial wiper with 70/30 with washer
Openable steel hatch
LED dome and lower interior lights
Roller front sunscreen
Standard
336 GC Hydraulic ExcavatorTechnical SpecificationsSpecificationsEngineEngine rpmSwing MechanismWeightsTrackDriveHydraulic SystemService Refill CapacitiesStandardsSound PerformanceAir Conditioning SystemOperating Weights and Ground PressuresMajor Component WeightsDimensionsWorking Ranges and ForcesReach Boom Lift Capacities – Counterweight: 6.8 mt – without BucketLong UndercarriageLong Narrow Undercarriage
Bucket Specifications and CompatibilityPin-On (No Quick Coupler)With Cat Pin Grabber CouplerWith CW Quick CouplerWith CWS Quick Coupler
Attachments Offering Guide
Standard and Optional EquipmentDealer Installed Kit and AttachmentsCab Options