Embed Size (px)
Citation preview
TECHNICAL SERVICES
MEASURE EXCELLENCE. PERFORM BETTER.
SERVICE
INTEGRITY
Technical Services
Westech offers leading companies industrial solutions that optimize performance and safety. Our biggest value to our customers is support. We supply integrated solutions backed by a diverse knowledge base of analytics, process control and instrumentation, and �fty years of experience. We service and support both the analytics and process instrument brands that we represent, as well as others.
Westech technical services include:• Rapid Service Response • In-House / On-Site Commissioning, Inspections, Support• Telephone Support• Inventory of Spares & Consumables• Dedicated Service Coordinators• Maintenance Agreements• Technical Consultations & Training
Mechanical Support:• Flare Ignition Systems• Biogas Valves/ Regulators• Varec and Other Tank Protection Products With Mobile Test Bench• PVRV’s• Emergency Vents• Flame Arresters• Blanketing Regulators• Set / Test / Rebuild Services• Control Valves • Pumps• Flow Meters• Provers• Filters• Strainers• Mixers
Analytical Support:• Site Acceptance Testing• SCS & Analyzer Inspections, Repair, Modi�cations and Evaluations• Physical Property• GC’s• Liquid Analysis• Continuous Gas Analysis• FT-IR / FT-NIR• Sulphur
CEMs:• RATA Support• Calibration Gas Audit Reporting• Performance Test
Measuring and Metering:
• Moisture in Gas and Liquids• Viscosity and Density Installation, Evaluations / Consultations• Gas Detection• Meter Calibration • Pressure Temperature Transmitter Calibration • Tank Level Calibration • Additive \ Blenders Calibration
SAFETY
PERFORMANCE
Service Facilities
At Westech, customer service is our �rst priority. We take pride in delivering top quality, cost-effective products, solutions and support on-time, anywhere.
Westech is strategically located to easily service the Western United States. Our service and support facilities are located in Cypress, CA., Denver CO., Seattle, WA., and Stafford, TX.
Stafford, Texas
Our full service, fabrication, and integration facility located in Stafford, TX can provide you with cost effective solutions to your process requirements. Our state of the art ASME approved fabrication facility has a wide range of fabrication capabilities ranging from specialty items for the biogas, petroleum, and petrochemical industries to modi�cations of the Varec Biogas product line.
Seattle
SAFETY
PERFORMANCE
Rapid Service Response 1-800-932-1263 SAFETY
PERFORMANCE
Mobile Proving
Westech is pleased to provide meter calibrations utilizing the Honeywell Small Volume Prover. Currently, we operate two Honeywell S-25 Provers with the max �ow rate of 3570 BPH, 2499 GPM and 568 m3/h. The two mobile provers are trailer mounted allowing for broad coverage of the western United States, with one prover located in California and the other in Washington. Out�tted with two 12vdc deep cycle batteries that are wired in series to create 24VDC operating power, our provers can perform in the most remote locations.
Westech utilizes Prove-it 8 software to operate the provers and collect data from each meter proving that will meet each customer’s required measurement policy, along with State and Federal guidelines and tolerances. Our technicians follow the Westech company policy of .05% repeatability and .0020 factor variation between previous and current proving. With over 25 years of proving experience combined, our highly experienced technicians will troubleshoot your Rack, Pipeline, Rail and LPG issues should any occur.
Westech mobile proving services include:• 2 NIST certi�ed portable small volume provers• On-site reports for each meter calibrated• Weights and measures certi�ed in CA, OR, WA, AZ, TX, CO• Prover certi�cates available upon request• Calibrated products include liquid, re�ned petroleum Products, crude oil and liquid natural gases (Propane, and Butane).
Prover Specs:• Honeywell Enraf S-25 Small Volume Prover• 300lb RF Flanges, pressure tested 4inch rack master hoses with documents available per request. • Can connect to customer �ttings including hammer union �ttings, API couplers, camlock, and �anged connections.
Rapid Service Response 1-800-932-1263
SERVICE
INTEGRITY
At Westech we believe in our motto “Measure Excellence. Perform Better”. Our provers undergo a yearly seal change and gravimetric water draw to ensure optimal performance and pin point accuracy.
Along with accuracy and maintaining your performance of measuring devices, Westech understands Safety is First, Last and Always. Westech is associated with ISNetworld, PICS and NCMS. Our technicians are enrolled in DOT and Non-DOT Drug and Alcohol Consortium to stay in tolerance with the industries safety regulations and undergo Re�nery Safety Orientation, Operator Quali�cations Testing.
Give us a call for a Quote today!
Huntington Beach Of�ceJustin R CondonToll Free 1-800-932-1263Direct 562-257-2135
Seattle Of�ceRobert HumesDirect 253-320-0510
Rapid Service Response 1-800-932-1263 SERVICE
INTEGRITY
Rapid Service Response 1-800-932-1263
Service Facilities
At Westech, customer service is our �rst priority. We take pride in delivering top quality, cost-effective products, solutions and support on-time, anywhere.
Westech is strategically located to easily service the Western United States. Our service and support facilities are located in Cypress, CA., Denver CO., Seattle, WA., and Stafford, TX.
Stafford, Texas
Our full service, fabrication, and integration facility located in Stafford, TX can provide you with cost effective solutions to your process requirements. Our state of the art ASME approved fabrication facility has a wide range of fabrication capabilities ranging from specialty items for the biogas, petroleum, and petrochemical industries to modi�cations of the Varec Biogas product line.
Westech is a trusted partner to leading Canadian industries, supplying instrumentation and process control equipment and solutions that meet the unique industry needs of our customers. Over its 50 year-lifespan, the company has prospered in the Oil & Gas, Terminal, Petrochemical, Food & Beverage, Pharmaceutical and Municipal markets by providing customer-centered solutions in the form of best of industry products.
We align our efforts to our philosophy of strength through partnership in 3 ways:
Our client-centered approach means that we commit to providing cost-effective solutions to your unique industrial challenges. We guarantee that our clients have access to quality products.
We strive to be a supportive channel partner to each of our suppliers, understanding their equipment and solutions through continued product and sales training. We represent the best manufacturers in any given category.
We rely on the integrity of our team to deliver consistent excellence. We work together to provide on-time delivery, personal assistance, educational services and expert application engineering.
123
Industry leading experts in Process Control and Instrumentation
Westech Service DepartmentTelephone: 1-800-932-1263
Email: [email protected]
For more information visit our website www.westech-ind-usa.com
