Upload
dokien
View
328
Download
13
Embed Size (px)
Citation preview
NA17AL0413A (1/5)
Subject : Request on update of the latest MFD software (Ver. 01.20.026) Equipment : JMR-9200 series, JAN-9201, JAN-9202
JMR-7200 series, JAN-7201, JAN-7202
Issue Date : April 13, 2017 Issue Number : NA17AL0413A
T.Tokoi Manager & Group Leader Navigation & Fishing Electronics Group Marine System Engineering Department Marine System Division
TECHNICAL INFORMATION FROM
NAVIGATION & FISHING ELECTRONICS GROUP
NA17AL0413A (2/5)
Priority [ X ] A: Carry out immediately [ ] B: Carry out at periodical inspection [ ] C: Carry out upon client’s request [ ] D: Information and news 1.Subject
Request on update of the latest MFD software (Ver. 01.20.026) 2. Object Equipment:
Equipment Model RADAR JMR-9200, JMR-7200 ECDIS JAN-9201, JAN-7201 CONNING JAN-9202, JAN-7202 However, special Support ships are not covered by this technical information. Refer to the attached document "ECDIS Special Support Ship List".
3. Information 3.1 Software changes In this software version, added functions and improved contents are found in the attached
“Software changes list”. Please confirm the list.
1) MFD Application software. Please update to the following Application software version for IHO Presentation Library
(PL) 4.0 compliance with ECDIS chart display and for event improvement. MFD Application software Ver.01.20.026
2) VDR RCU software. Please update to the latest VDR RCU software (Ver 1.01.002) or later at the same time as updating the MFD Application software in order to improve the following events. ・Image transfer format from MFD is incomplete and VDR restarts. ・RMS information of MFD is not collected in VDR. VDR Software Ver 1.01.002
TECHNICAL INFORMATION “NA17AL0130A”
NA17AL0413A (3/5)
3.2 Work 1) MFD Application Software.
The work content varies depending on the application software version of the MFD that performs the update. Please prepare before visit by referring to the table below.
Target Software Version
Work Refer to TECHNICAL INFORMATION
Before Ver.1.10.323
MFD Application Software(Ver. 1.20.026) This TECHNICAL INFORMATION
SLC CMH-2370 firmware (Ver.1.00.093) CCU NDC-1590 firmware(Ver.1.12) TOP NCE-5605 firmware(Ver.1.07) BIOS Update(JC11)
TECHNICAL INFORMATION NA16AL1213A
Ver. 1.10.323 MFD application Software(Ver. 1.20.026) This TECHNICAL INFORMATION
・Download the following MFD application software from the JRC Marine Service Web ,and save it on CD or USB memory.
MFD application Software Ver.01.20.026
・Prepare an update CD or USB for the number of MFD installed on the ship. ・Be sure to save the backup of the configuration file according to the “TECHNICAL INFOR-MATION NA17AL0118B” before updating the software. ・Update the software according to the attached document "Updating software of the MFD Application.pdf [7ZPNA4688]". After software update, reinstallation of ENC chart of ECDIS is necessary.
Update work time (per machine) Working time Breakdown Remark
About 1 hour 50 minutes ~ 3 hours 50 minutes
Software Update:About 10minutes
Reinstall chart:1~3 hours
The chart installation time depends on the number of cell contracts. (Note 1)
(Note 1) ENC chart reinstall time: About 1~3 hours
: About 30 minutes per 1 CD (the whole JAPAN) : About 13 hours (the whole world) About 1 hour per 100 charts that has been permitted.
If there are few equipment, estimated time for updating software is necessary by number of equipments.
NA17AL0413A (4/5)
2) Software combination of MFD and VDR
The combination of MFD and VDR software version causes the following contents. If VDR software is 01.00.021 or earlier, update VDR to the latest software.
MFD Software VDR Software Contents 01.20.026 or later (New software)
01.00.021 or earlier (Old software)
Since the image transfer formats of VDR and MFD are not matched, VDR restarts during image transfer.
01.10.323 or earlier (Old software)
01.01.002 or later (New software)
Since the D (destination) of the tag block output from the MFD is not VDR or blank, the RMS information of the MFD is not collected in VDR.
01.20.026 or later (New software)
01.01.002 or later (New software)
The above contents will be improved.
3) Manuals
Due to software update, the following manuals have been revised, please request as nec-essary.
Manual (English) Edition Code RADAR Instruction Manual Basic Operation 7ZPNA4446D Function 7ZPNA4447D Reference 7ZPNA4448D ECDIS Instruction Manual Basic Operation 7ZPNA4449E Function 7ZPNA4450E Reference 7ZPNA4451E CONNING Instruction Manual - 7ZPNA4452E RADAR/ECDIS/Conning Installation Manual - 7ZPNA4466D RADAR/ECDIS/Conning Field Service Manual - 7ZPNA4467B
4) Software Update Kit
The software update kit : 7ZZNA4168
No. Part Name Code Q’ty 1 JAN-7201/9201 Software Update CD 7ZZNA4169 1 2 JAN-7201/9201
Procedure of PL4.0 Software Update 7ZPNA4519 1
3 JAN-7201/9201 Instruction Manual Basic Operation(English)
7ZPNA4449E 1
4 JAN-7201/9201 Instruction Manual Function(English)
7ZPNA4450E 1
5 JAN-7201/9201 Instruction Manual Reference(English)
7ZPNA4451E 1
5) Declaration
Please download the update declaration form from JRC MS Web, print it and visit us.
NA17AL0413A (5/5)
3.3 Information on result of software update
In order to grasp update situation, send the attached "MFD Software Maintenance Record" to Marine Service by E-mail after updating.
Mail address: [email protected] 4. Attached document
1) Software changes list NA17AL0413A-01 2) ECDIS Special Support Ship List NA17AL0413A-02 3) Updating software of the MFD Application 7ZPNA4519A
5. Related Service-news and/or Technical Information
NA16AL1213A NA17AL0118B
Softw
are
chan
ges
list
Impr
ovem
ent
cont
ents
No.
Soft
war
e Ve
rEq
uipm
ent
Sym
ptom
Cont
ent
Aft
er a
pply
ing
upda
te s
oftw
are
1RA
DAR
/ECD
ISIS
W s
etup
dat
a is
not
pre
serv
ed.
As a
res
ult
of t
he in
stan
tane
ous
pow
er in
terr
uptio
n of
the
ISW
, the
ISW
set
ting
is c
lear
ed a
nd T
X /
RX C
omm
unic
atio
n Fa
iled
on t
he E
CDIS
occ
urs
Impr
oved
so
that
ISW
set
up is
pre
serv
ed a
t bl
acko
ut o
f ISW
.W
hen
blac
kout
exc
eeds
for
3 m
inut
es o
r m
ore,
the
set
up is
sur
e to
cle
ar w
ithou
t pr
eser
ving
.
2RA
DAR
TT is
not
dis
play
ed in
the
Sea
Sta
biliz
atio
n M
ode.
TT d
ata
beco
mes
"M
issi
ng"
in t
he S
ea S
tabi
lizat
ion
Mod
e".
Impr
oved
so
that
TT
data
is d
ispl
ayed
cor
rect
ly.
3RA
DAR
CPA/
TCPA
dis
play
is z
ero.
In c
ase
of w
eak
echo
tar
get,
CPA
/TCP
A di
spla
y is
zer
o.Im
prov
ed s
o th
at C
PA/T
CPS
is c
alcu
late
d co
rrec
tly.
4EC
DIS
Leg
dire
ctio
n of
GC
rout
e is
not
cor
rect
ly.
Leg
dire
ctio
n di
spla
y of
GC
rout
e is
not
cor
rect
ly.
Impr
oved
so
that
leg
dire
ctio
n of
GC
rout
e is
dis
play
ed c
orre
ctly
.
5EC
DIS
The
Voya
ge D
ista
nce
disp
lay
is n
ot c
orre
ctly
.Th
e Vo
yage
Dis
tanc
e va
lue
betw
een
No.
1 EC
DIS
and
No.
2 EC
DIS
is d
iffer
ent.
Impr
oved
so
that
Voy
age
Dis
tanc
e is
sam
e va
lue
betw
een
No.
1 EC
DIS
and
No.
2 EC
DIS
.
6RA
DAR
/ECD
ISAI
S Vo
yage
Dat
a se
tup
is n
ot a
vaila
ble.
Even
if s
ettin
g ET
A of
the
AIS
Voy
age
Dat
a, t
he t
ime
is c
lear
ed a
nd d
ispl
ays
"01/
0100
:00
LT".
Impr
oved
so
that
ETA
of t
he A
IS V
oyag
e D
ata
is p
rese
rved
.
7RA
DAR
/ECD
ISCo
nnec
tion
failu
re o
f 8ch
ISW
Whe
n 8c
h IS
W c
onne
cts
5 M
FD d
ispl
ay u
nits
or
mor
e, e
ven
if IS
W c
onne
ctio
n co
nfig
urat
ion
is c
hang
ed, t
he s
etup
dat
a is
not
app
lied.
Impr
oved
tha
t ch
ange
of I
SW s
etup
is a
pplie
d.
8Al
lM
FD s
huts
dow
n ab
norm
ally
.Ap
plic
atio
n so
ftwar
e sh
uts
dow
n ab
norm
ally
.Ev
en if
reb
ootin
g, t
he "
MFD
.exe
is s
topp
ed w
orki
ng"
is d
ispl
ay.
Impr
oved
bug
of a
bnor
mal
sho
ut d
own
in t
he V
er1.
00.x
xx.
9Al
lTi
me
stop
sW
hen
canc
elin
g tim
e so
urce
syn
chro
nous
, not
GPS
tim
e, C
CU R
TC t
ime
is d
ispl
ayed
. But
RTC
sto
ps, s
o th
at t
ime
upda
ting
on t
he s
cree
n st
ops.
(Sin
ce t
here
is n
ot s
etup
for
chan
ging
tim
e di
ffere
nce,
tim
e sy
nchr
onou
s sh
ould
be
canc
eled
. If t
ime
and
time
diffe
renc
e is
bas
ed o
n RT
C).
Impr
oved
so
that
tim
e sy
nchr
oniz
e is
set
with
tim
e an
d tim
e di
ffere
nce
sepa
rate
ly.
10EC
DIS
ARCS
num
ber
disp
lay
is o
ne d
igit
less
.AR
CS U
ser
Perm
it nu
mbe
r di
spla
y in
the
Sys
tem
Inf
orm
atio
n di
alog
is o
ne d
igit
less
.Im
prov
ed s
o th
at a
ll di
gits
are
dis
play
ed.
11Al
lSL
C dr
y co
ntac
t si
gnal
doe
s no
t dr
ive
whe
n se
ttin
g on
initi
al in
stal
latio
n.Ev
en if
mar
king
a c
heck
into
the
dry
con
tact
sig
nal i
n th
e in
stal
latio
n se
tup,
the
dry
con
tact
sig
nal d
oes
not
driv
e.Bu
t w
hen
mar
king
a c
heck
from
OFF
to
ON
into
the
JB,
the
dry
con
tact
sig
nal b
ecom
es t
o dr
ive.
Impr
oved
by
usin
g th
e Sy
nc M
anua
lly a
fter
inst
alla
tion
setu
p.
12Al
lCo
ntin
ue t
o is
sue
Tim
erRe
set
by h
oldi
ng d
own
the
butt
onW
hen
the
butt
on o
f the
tra
ck b
all u
nit
cont
inue
s to
be
pres
sed
dow
n, t
he T
imer
Res
et (
cont
act,
EVE
sen
tenc
e) t
o th
e BN
WAS
is r
epea
tedl
y tr
ansm
itted
.Ti
mer
Rese
t (c
onta
ct, E
VE s
ente
nce)
tra
nsm
its o
nly
the
pres
s tim
ing.
13Al
lCo
mm
unic
atio
n fo
rmat
with
VD
R is
diff
eren
t fr
om s
tand
ard
Belo
w is
not
the
IEC
611
62-4
50 s
tand
ard
for
VDR
imag
e tr
ansf
er.
・Whe
n se
ndin
g Q
UERY
and
ACK
, add
"de
scrip
tor"
・Dev
ice
and
chan
nel o
f Bin
ary
imag
e de
scrip
tor
stru
ctur
e ar
e 0
It c
onfo
rms
to I
EC 6
1162
-450
sta
ndar
d an
d co
rres
pond
s to
the
follo
win
g ite
ms.
・Do
not
add
"des
crip
tor"
whe
n se
ndin
g Q
UERY
and
ACK
・Dev
ice
and
chan
nel o
f Bin
ary
imag
e de
scrip
tor
stru
ctur
e ar
e 1
14EC
DIS
The
aver
age
spee
d de
scrib
ed in
the
Log
book
bec
omes
an
aste
risk
disp
lay
Logb
ook
Aver
age
spee
d be
com
es a
n as
teris
k in
dica
tion
due
to t
roub
les
of t
rain
ing
proc
essi
ngLo
gboo
k Av
erag
e sp
eed
disp
lays
cor
rect
ly c
alcu
late
d va
lue.
New
Cor
resp
onde
nce
No.
Soft
war
e Ve
rEq
uipm
ent
Item
Cont
ent
1EC
DIS
SEN
C Sy
nchr
onou
s Fu
nctio
nSy
nchr
onou
s of
SEN
C da
ta is
ava
ilabl
e be
twee
n di
spla
y un
it w
hich
has
ECD
IS li
cens
e.
2RA
DAR
/ECD
ISRo
ute
Mon
itorin
g Sy
nchr
onou
s Fu
nctio
nRo
ute
mon
itore
d w
ith t
he R
oute
Mon
itorin
g fu
nctio
n ca
n be
dis
play
ed b
etw
een
RAD
AR a
nd R
ADAR
.
3EC
DIS
Corr
espo
ndin
g to
TCS
Ed.
2.0
TCS
func
tion
is a
vaila
ble
with
aut
opilo
t of
YD
K PT
-900
or
TK P
R-90
00.
4EC
DIS
Mul
tiple
Cur
rent
Ind
icat
ion
Func
tion
Curr
ent
trac
k of
5la
yers
can
be
disp
laye
d.
5RA
DAR
/ECD
ISLR
IT C
onne
ctio
nTh
e LR
IT fu
nctio
n of
Inm
arsa
t ca
n be
alte
rnat
ed O
N o
r O
FF fr
om E
CDIS
or
RAD
AR.
6RA
DAR
/ECD
ISCo
rres
pond
ing
to I
EC62
288
Ed.2
.0Co
rres
pond
ed t
o IE
C622
88 E
d2 s
tand
ard
rega
rdin
g vo
yage
info
rmat
ion
disp
lay.
7RA
DAR
Corr
espo
ndin
g to
IEC
6238
8 Ed
.3.0
Corr
espo
nded
to
IEC6
2388
Ed3
.0 o
f RAD
AR s
tand
ard.
8Al
lSy
nc M
anua
lly F
unct
ion
Curr
ent
inst
alla
tion
setu
p da
ta c
an b
e up
date
d on
the
ow
n di
spla
y un
it, o
ther
s di
spla
y un
its a
re s
ynch
roni
zed
with
the
set
up d
ata.
9EC
DIS
Corr
espo
ndin
g to
the
JRC
For
mat
of N
avte
xN
avte
x in
form
atio
n ca
n be
dis
play
ed b
y re
ceiv
ing
JRC
form
at.
11EC
DIS
conf
orm
to
PL4.
0co
nfor
m t
o IH
O S
-52
Anne
xA P
rese
ntai
on L
ibra
ry E
d.4.
0 st
anda
rd
12RA
DAR
/ECD
ISGP
S ro
ute
shar
ing
func
tion
The
follo
win
g ro
ute
shar
ing
func
tion
GPS→
ECD
ISEC
DIS
→GP
S/JM
A-91
00Se
ries
JAN
-901
BSer
ies→
RAD
AR
13Al
lLA
N d
uplic
atio
n of
MFD
com
mun
icat
ion
Sub
LAN
com
patib
ility
of f
ile s
harin
g fu
nctio
n be
twee
n M
FD s
uch
as n
avig
atio
n ro
ute
files
14Al
lCo
ntac
t's S
LC S
ub L
AN c
ompa
tible
Supp
orts
Sub
LAN
for
inpu
t an
d ou
tput
of C
onta
ct o
f SLC
15Al
lPa
rtia
l ale
rt s
uppr
essi
on fu
nctio
n
Adde
d M
ask
func
tion
to e
quip
men
t se
ttin
g so
tha
t th
e fo
llow
ing
aler
ts d
o no
t oc
cur
・Pos
ition
Not
Diff
rent
ial W
arni
ng・D
atum
(Una
vaila
ble)
War
ning
・CO
G/SO
G(Un
avai
labl
e) C
outio
n
Poin
t to
Not
eN
o.So
ftw
are
Ver
Equi
pmen
tCo
nten
tA
dvic
e
1Al
lIf
appe
arin
g th
e "C
OG/
SOG
Inva
lid C
autio
n"
If m
ista
king
the
Axi
s se
tup,
the
Inv
alid
Cau
tion
of C
OG/
SOG
occu
r.
Chec
king
of s
etup
: Ch
eck
that
Log
1AX
/2AX
of t
he D
evic
e In
stal
latio
n is
mis
mat
ch, o
r no
t.R
easo
n fo
r oc
curr
ence
:In
cas
e of
1AX
Log
, CO
G/SO
G ca
n't
be m
easu
red.
If s
ettin
g 2A
X Lo
g fo
r th
e ve
ssel
inst
alle
d 1A
X Lo
g by
mis
take
, the
Cau
tion
is d
ispl
ayed
by
no r
ecep
tion
data
.Co
rres
pond
ing
to s
tand
ard
in t
he V
er.1
.10.
323,
eve
n if
not
usin
g se
nsor
dat
a is
not
rec
eive
d, t
he C
autio
n is
dis
play
ed.
2Al
lIf
the
"Cur
rent
Met
er"
is n
ot d
ispl
ayed
The
Curr
ent
Met
er b
ecom
es t
o be
not
dis
play
ed a
fter
upda
ting
softw
are.
Chec
king
of s
etup
: Ch
eck
that
Ane
mom
eter
of t
he D
evic
e In
stal
latio
n is
mar
ked
chec
k.R
easo
n fo
r oc
curr
ence
: Th
e Cu
rren
t M
eter
is d
ispl
ayed
cou
ple
with
the
Win
d M
eter
.In
the
Ver
.1.1
0.32
3, s
ince
the
Ane
mom
eter
dis
play
can
be
alte
rnat
ed O
N/O
FF w
ith it
s se
tup,
whe
n di
spla
ying
the
Cur
rent
Met
er w
ithou
t di
spla
y th
eAn
emom
eter
, ple
ase
set
OFF
the
Ane
mom
eter
dis
play
.
3Al
lW
hen
sett
ing
the
"Net
wor
k Li
st"
Shal
l reg
iste
r on
ly M
FD d
ispl
ay u
nit
whi
ch is
syn
chro
nize
d w
ith t
he F
ile M
anag
er/S
ENC
in t
he N
etw
ork
List
.Sh
all n
ot r
egis
ter
a un
it su
ch a
s SL
C, A
LC, G
PS, A
IS, I
nmar
sat
whi
ch d
oesn
't sh
are
file
with
MFD
dis
play
uni
t.Pl
ease
ref
er t
o th
e cl
ause
4.1
1 of
inst
alla
tion
man
ual,
if t
here
is a
uni
t w
hich
doe
sn't
shar
e fil
e in
the
Net
wor
k lis
t, d
elet
e th
e un
it.
4Ve
r.1.
20.0
26EC
DIS
Reim
port
cha
rtSi
nce
the
SEN
C fo
rmat
is c
hang
ed w
ith P
L 4.
0 co
mpa
tibili
ty, i
t is
nec
essa
ry t
o re
-impo
rt t
he c
hart
.
Ver.
1.10
.323
Ver.
1.20
.026
Ver.
1.10
.323
Ver.
1.20
.026
Ver.
1.10
.323
NA1
7AL0
413A
-01
Software Version ORDER Vessel name YARD SHIP NUMBER specification Remarks
01.20.101 2DI-1045A0002 JMU呉 S5075 TCS-related NYKrequirement correspondence
01.20.101 2DJ-2077 HYUNDAI PRINCEPIA DSME H2451 Harbor mode for IAS01.20.101 2DJ-2078 HYUNDAI PEACEPIA DSME H2452 Harbor mode for IAS01.20.101 2DJ-2075 SM EAGLE DSME H2449 Harbor mode for IAS01.20.101 2DJ-2075/76 SM SEAHAWK DSME H2450 Harbor mode for IAS01.20.018 2DI-8765 NYK BLUE JAY JMU S5061 PL4.0
Radar Xband:01.10.108Radar Sband:01.10.107
2DP-5002 NYK DIANA Existing ship 1790 Wave analysis
The following No. 1 ECDIS, N 0.2 ECDIS,An update is required for the latest software (Ver.1.20.026).
No1ECDIS :Ver 01.10.332No2ECDIS :Ver 01.10.332
Radar Xband:01.10.102Radar Sbandド:01.10.102 2DI-1552 Green Drive Highway JMU 5044 Wave analysis
The following No. 1 ECDIS, N 0.2 ECDIS,An update is required for the latest software (Ver.1.20.026).
No1ECDIS :Ver 01.10.102No2ECDIS :Ver 01.10.102
Radar Xband:01.10.1082DI-1553 (JMU5045) 776 Wave analysis
The following No. 1 ECDIS, N 0.2 ECDIS,An update is required for the latest software (Ver.1.20.026).
Radar Sband:Ver 01.10.322No1ECDIS :Ver 01.10.322No2ECDIS :Ver 01.10.322
Radar Xband:01.10.108 2TE-8235 TAMPA TRIUMPH Imabari Shipbuilding 2561 Wave analysis For MFD other than the Radar X band, update to the latestsoftware (Ver.1.20.026).
Radar Xband:01.10.107 DR-6356(old)DR-3544(new)
Victorious Ace MINAMINIPPONSHIPBUILDING
719 Wave analysis For MFD other than the Radar X band, update to the latestsoftware (Ver.1.20.026).
Radar Xband:01.10.108 2DI-4091 Clipper Polaris MES 1824 Wave analysis For MFD other than the Radar X band, update to the latestsoftware (Ver.1.20.026).
Radar Xband:01.10.108 SVANEN ASTANO 268 Wave analysis For MFD other than the Radar X band, update to the latestsoftware (Ver.1.20.026).
02.00.02602.00.028 2DJ-2009 Delphis Bothnia HHIC N263 INS
02.00.028 2DJ-2010 Delphis Finland HHIC N264 INS02.00.028 2DJ-2011 DELPHIS GDANSK HHIC N265 INS02.00.028 2DJ-2012 DELPHIS RIGA HHIC N266 INS
02.00.029 2DJ-2238 unkown SHI SN2172 INS
NA17AL0413A-02
7ZPNA4519A
MFD
JMR-9200/7200 Series RADAR
JAN-9201/7201 ECDIS
JAN-9202/7202 CONNING
Software Update Manual
Contents Preface(Parts list in this work and estimate of working time) ................................................................. 1 Step1:Confirming of latest Base CD, Update CD, and Cell permit(In case of using ENC) ............................ 3 Step2:Confirming latest C-Map database DVD and license (in case of using C-Map) .................................. 3 Flow Chart........................................................................................................................................................ 4 Step3:Updating the Software .......................................................................................................................... 5 Step4:Import ECDIS Chart1............................................................................................................................ 9 Step5:Confirm display of ECDIS Chart1 ....................................................................................................... 14 Step6:Re-install of charts .............................................................................................................................. 19 Step7:Sending of software update result ...................................................................................................... 19 MFD Software Maintenance Record ............................................................................................................. 20
7ZPNA4519A
1
Outline This manual is for software update of MFD JMR-9200/7200 series RADAR, JAN-9201/7201 ECDIS,
JAN-9202/7202 CONNING.
Preface(Parts list in this work and estimate of working time)
Parts list in this work and estimate of working time is described as follows. Confirm before visiting ship
Parts list in this work
Parts list Remark
USB memory or CD / DVD
with latest MFD application
software
Please obtain the latest MFD application software beforehand and record it on USB
memory, CD / DVD.
Please prepare the update USB memory or CD / DVD for the number of MFDs installed
on the ship.
Customer) Please contact our sales representative.
Agency) Please download from the website of TMSC or Alphatron Marine Beheer
B.V.(in preparation) .
Software update manual This manual.
Additional Manual for
Chart Installation
Customer) Please contact our sales representative.
Agency) Please download from the website of TMSC or Alphatron Marine Beheer
B.V.(in preparation) . code: [7ZPNA4461*]
ENC/AVCS
Data base CD
Necessary in case of using ENC/AVCS
(Use it at ship after getting from customer)
ENC/AVCS
Cell Permit CD
Necessary in case of using ENC/AVCS
(Use it at ship after getting from customer)
C-Map Ed.3
Database DVD
Necessary in case of using C-Map Ed.3
(Use it at ship after getting from customer)
C-Map Ed.3
License file
Necessary in case of using C-Map Ed.3
(Use it at ship after getting from customer)
7ZPNA4519A
2
If you wish, you can order the following exchange kit to your local sales office, branch office.
JAN-7201/9201 For PL4.0 Software Update kit 7ZZNA4168
7ZPNA4519A
3
Estimate of working time (per 1 device)
The working time is different for the before version and using chart. Refer for work planning.
Chart Working time breakdown Remark
ENC
(including
AVCS)
About
1.5 hour
– 3.5 hour
Updating software:about 10min
Installing chart: about 1 – 3 hour
Chart installing time is
different for the number
of licensed cell.
(*1)
C-Map Ed.3 About
1hour
Updating software:about 10min
Installing chart:about 50min
Since it is not currently
compatible with PL 4.0,
reinstalling is
unnecessary.
(*1) Estimated time for re-installing ENC(including AVCS) charts: about 1 - 3 hours
about 30 minutes per 1 CD (the whole JAPAN)
about 13 hours (the whole world)
about 1 hour per 100 charts that have been permitted
Step1:Confirming of latest Base CD, Update CD, and Cell permit(In case of using ENC)
When executing software update and re-installing ENC (Contain AVCS) charts, following items are required:
● Latest Base CD
● Latest Update CD
● Latest Cell Permit
Step2:Confirming latest C-Map database DVD and license (in case of using C-Map)
In case of current software versions are V56 – V56A, after updating software, it is necessary to re-install C-Map
database. So, following item is necessary at updating..
Latest database DVD
Latest license file
7ZPNA4519A
4
Flow Chart The work outline of the software update is described in the following. Confirm it before work by all means.
Start
Step3:Updating the Software
Finish
Step2:Confirming latest C-Map database DVD and license (in case of using C-Map)
Step1:Confirming of latest Base CD, Update CD, and Cell permit(In case of using ENC)
Step5:Confirm display of ECDIS Chart1
Step6:Re-install of charts
Step7:Sending of software update result
Step4:Import ECDIS Chart1
7ZPNA4519A
5
Step3:Updating the Software This section describes software update of this equipment.
Note When software update starts, the tasks that are active are automatically terminated. Complete the necessary operation such as saving of settings prior to the start of update.
Required Item The following item is required to update the MFD software.
Table Required Item
No. Name Model Name
1 CD/DVD or USB memory containing software update data *1
-
*1 Do not use Flash drives which are password protected or encrypted.
When you want to use a USB flash memory to read or write a file, make sure in advance that the USB flash memory is not affected by a computer virus. If the display unit is infected with a virus, other equipment will also be infected, with the result that a trouble will occur.
Before removing the USB flash memory, check for the access lamp of the USB flash memory and make sure that it is not being accessed. If you remove the USB flash memory when it is accessed, data may be destroyed and a trouble may occur.
7ZPNA4519A
6
Procedure
Set the CD/DVD or USB flash memory containing the update data.
Click on the [Menu] button on the left toolbar. The menu is displayed.
Click on [Maintenance] - [Software Update] - [Software Update] on the menu.
The "Software Update" dialog box appears.
Click on the [Software Update] button.
7ZPNA4519A
7
A file selection dialog box appears.
From the [Drive] combo box, select the drive you want to store updated data.
From the file list, select the file MFD_Setup.exe. MFD_xx.xx.xxxx.exe is displayed in [File name].
Click on the [OK] button. The update content confirmation dialog box appears.
7ZPNA4519A
8
Confirm the contents and click on [OK].
Installation of the update is started and the following message is displayed.
Wait for a while until the installation completes.
Note This equipment may restart during installation.
When installation is completed, the following message is displayed.
Turn off the power of this equipment.
Restart this equipment. Start MFD, and confirm that the software version number has been updated in the [Software] tab by
selecting [Maintenance] - [System Information].
7ZPNA4519A
9
Step4:Import ECDIS Chart1
1) Start ECDIS software, and left-click “Chart Maintenance” from Task Menu.
2) Select [Import/Update charts] at the Chart Maintenance window.
7ZPNA4519A
10
3) Left-click [ENC]button.
4) Left-click [Manually] button.
7ZPNA4519A
11
5) Select ” D:¥MFD¥system¥ECDIS_Chart_1”, then click OK button.
6) Left-click [Select] button. Comfirm that following chart are listed.
7ZPNA4519A
12
7ZPNA4519A
13
7) Left-click [Import/Update] button, then import charts.
7ZPNA4519A
14
Step5:Confirm display of ECDIS Chart1 1) Left click “ECDIS” in Task Menu, and start “ECDIS”.
2) Select MENU - [Chart] - [Select S-57/Chart...].
7ZPNA4519A
15
3) Select ”AA5C1AB1” from Select Chart dialog, then click OK button.
4) Select MENU - [Chart] - [Date-dependent View...], then input ”(UTC) 2014-08-27” in ”Start date and
Time”.
7ZPNA4519A
16
5) Select MENU - [View] - [Option] - [Chart Common].
6) Set as follows.
7ZPNA4519A
17
7) Select MENU - [View] - [Option] - [Chart View].
8) Set as follows.
7ZPNA4519A
18
9) Confirm that display of ECDIS Chart1.
If the display similar to the figure below is displayed, the chart update is done normally.
7ZPNA4519A
19
Step6:Re-install of charts
When updating to MFD Application Software , reinstallation of ECDIS chart is required. Refer to “Additional Manual for Chart Installation [7ZPNA4461*]”
Step7:Sending of software update result
Fill in necessary matters on "MFD Software Maintenance Record" in the end of the manual, and send a
e-mail or a fax to JRC MARINE SERVICE DEPARTMENT (PRODUCT SUPPORT).
TMSC
E-mail [email protected]
7ZPNA4519A
20
MFD Software Maintenance Record Please fill in the update result on the following tables and send it to our company after software upgrading
and reinstalling the chart is completed.
Addressee Marine Service Department (TMSC)
E-mail [email protected]
Equipment model
Please apply the sign to the equipment used.
Serial number
RADAR: JMR-72XX JAN-92XX _____, _____, _____
ECDIS: JAN-7201 JAN-9201 _____, _____, _____
Conning: JAN-7202 JAN-9202 _____, _____, _____
Ship’s name
The name of customer
The contact information of
customer
MFD application Maintenance No.
before updates
after updates
SLC:CMH-2370 firmware version
before updates
after updates
CCU:NDC-1590 firmware version
before updates
after updates
TOPU:NCE-5605 firmware version
before updates
after updates
BIOS BIOS (Update to the Ver. JC11)
Use chart
Please apply the sign to the chart used.
ENC(Contain AVSC) ARCS C-MAP Ed.3
Others( )
Trigger of Onboard
□ Commissioning (or before deliver)
□ After deliver (only this service)
□ After deliver (Simultaneous service of this service and other services)
□ Other Date (Month) (Day), (Year)
Name/Signature
Branch office/branch/agency