Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Technical data sheet SM230ASR-TP
www.belimo.com T2-SM230ASR-TP • en • v2.0 • 08.2009 • Subject to changes � / 3
Modulating damper actuator for adjusting air dampers in ventilation and air-conditioning systems for building services installations• For air dampers up to approx. 4 m2
• Torque 20 Nm• Nominal voltage AC 100 ... 240 V• Control: Modulating DC 0 ... 10 V• Position feedback DC 2 ... 10 V• with connecting terminals
Technical data
Electrical data Nominal voltage AC �00 ... 240 V, 50/60 HzNominal voltage range AC 85 ... 265 VPower consumption In operation
At restFor wire sizing
2.5 W @ nominal torque0.6 W6 VA
Connection Power supplySignals
Terminals 4 mm2 (Cable ∅ 4 ... �0 mm, 2-core)Terminals 4 mm2 (Cable ∅ 4 ... �0 mm, 4-core)
Functional data Torque (nominal torque) Min. 20 Nm @ nominal voltageControl Control signal Y
Operating rangeDC 0 ... �0 V, typical input impedance �00 k�DC 2 ... �0 V
Position feedback (Measuring voltage U) DC 2 ... �0 V, max. � mAAuxiliary supply DC 24 V ±30%, max. �0 mAPosition accuracy ±5%Direction of rotation Reversible with switch 0 / �Direction of motion at Y = 0 V In switch position 0 resp. �Manual override Gearing latch disengaged with pushbutton, can be lockedAngle of rotation Max. 95° , can be limited at both ends with adjustable
mechanical end stopsRunning time �50 s / 90°Sound power level Max. 45 dB (A)Position indication Mechanical, pluggable
Safety Protection class II Totally insulated Degree of protection IP54 in any mounting position
NEMA 2, UL Enclosure Type 2EMCLow voltage directive
CE according to 2004/�08/ECCE according to 2006/95/EC
Certification cULus according to UL 60730-�A and UL 60730-2-�4and CAN/CSA E60730-�:02Certified to IEC/EN 60730-� and IEC/EN 60730-2-�4
Mode of operation Type �Rated impulse voltage 2.5 kVControl pollution degree 3Ambient temperature range –30 ... +50°CNon-operating temperature –40 ... +80°CAmbient humidity range 95% r.h., non-condensatingMaintenance Maintenance-free
Dimensions / Weight Dimensions See «Dimensions» on page 3Weight Approx. �.05 kg
SM230ASR-TP Modulating damper actuator, AC 100 ... 240 V, 20 Nm, with connecting terminals
2 / 3 T2-SM230ASR-TP • en • v2.0 • 08.2009 • Subject to changes www.belimo.com
Safety notes
!• The actuator is not allowed to be used outside the specified field of application, especially in
aircraft or any other form of air transport.• Assembly must be carried out by trained personnel. Any legal regulations or regulations
issued by authorities must be observed during assembly.• Caution Power supply voltage!• The device may only be opened at the manufacturer‘s site. It does not contain any parts that
can be replaced or repaired by the user.• When calculating the required torque, the specifications supplied by the damper manufacturers
(cross section, design, installation site), and the air flow conditions must be observed.• The device contains electrical and electronic components and is not allowed to be disposed
of as household refuse. All locally valid regulations and requirements must be observed.
Accessories
Description Data sheet
Electrical accessories Auxiliary switch S..A.. T2 - S..A..Feedback potentiometer P..A.. T2 - P..A..Position sensor SGA24, SGE24 and SGF24 T2 - SG..24
Mechanical accessories Various accessories (clamps, shaft extensions etc.) T2 - Z-SM..A..
Product features
Mode of operation The actuator is controlled with a standard modulating signal of DC 0 ... �0 V and travels to the position defined by the control signal. Measuring voltage U serves for the electrical display of the damper position 0 ... �00% and as slave control signal for other actuators.
Simple direct mounting Simple direct mounting on the damper spindle with a universal spindle clamp, supplied with an anti-rotation strap to prevent the actuator from rotating.
Manual override Manual override with push-button possible (the gear is disengaged for as long as the button is pressed or remains locked).
Adjustable angle of rotation Adjustable angle of rotation with mechanical end stops.
High functional reliability The actuator is overload-proof, requires no limit switches and automatically stops when the end stop is reached.
Electrical installation
Wiring diagram
Y U 5
1 32 51 2
DC 0…10 VDC 2…10 V
N L
T
SG..24
Notes• Caution Power supply voltage!• Other actuators can be connected in parallel.
Please note the performance data.
!
SM230ASR-TP Modulating damper actuator, AC 100 ... 240 V, 20 Nm, with connecting terminals
www.belimo.com T2-SM230ASR-TP • en • v2.0 • 08.2009 • Subject to changes 3 / 3
Dimensions [mm]
Dimensional drawings
139
56 72
Damper spindle Length≥48 �0 ... 20 �) ≥�0 ≤20≥20 �0 ... 20 �) ≥�0 ≤20
�) CrNi (INOX) �2 ... 20 30 131
88
6.5 mm
35 mm
4 ...
10
mm
SM..A..70
214-
0000
3.F
SM..A..
www.belimo.com M2-SM..A.. • v2.3 • 01.2013 1 / 2
1
2
1
2
1
2
1
≈1mm
3
10
10
9 Nm
CrNi (INOX) 15 Nm
2
1
1
≈1mm
4
2
1
65°
5
≥ 48
≥ 20
1
2
3
4
5
12
3
10...20 ≥10 ≤20
CrNi(INOX) 12...20 ≥10 ≤20
SM..A..
2 / 2 M2-SM..A.. • v2.3 • 01.2013 www.belimo.com
AC24V/DC24V
1 2 3
– +
T ~
+
~
1 2 3
0...100%
S1 S2 S3
– +
T ~
+
~
1 2 3 S1 S2 S3
10
– +
T ~
+
~
SM24A..SMD24A..
SM24A-S.. SM24AP5..
AC100...240V N L L
1 2 3
N L L
1 2 3
0...100%
S1 S2 S3
S1 S2 S31
0
S1 S2 S31
0
SM230A..SMD230A..
SM230A-S..
!
AC24V/DC24V
1 32 5
– +
T ~ Y DC 0…10 VU DC 2…10 V
1 32 5
– +
T ~ Y DC 0…10 VU MP
SM24A-SR..SM24A-MF..
SM24A-MP..
AC100...240V Y
U 5
1 3 2 5
T
N L
1 2
DC 0…10 V
DC 2…10 V
SG..24
SM230ASR.. 1 2
– +
T ~
VR..
SM24A-V
SM24A-V/VR..
AC24V/DC24V(SM24A-V / VR..)
!
1
0
N L
1 2 3
1
0
– +
T ~
1 2 3
0
N L
– +
T ~
1
0