3
A 9110 9116 9510 9514 8010 8060 8063 8065 8070 8071 8073 8110 8160 8170 8824 9800 9807 9810 9812 9815 9817 9890 9891 5988 5938 5957 5931 5932 5933 5958 5901 3494 4420 6120 9241 9244 9280 9290 9830 9836 9839 9940 3330/3335 3372 3430 3440 3448 3489 3362SS 9651 9652 5567 Product number Thickness mm0.190 0.180 0.170 0.170 0.095 0.105 0.100 0.100 0.080 0.080 0.100 0.095 0.105 0.080 0.120 0.105 0.140 0.195 0.210 0.200 0.210 0.150 0.150 0.450 0.500 0.700 1.000 2.000 3.000 0.450 1.000 0.173 0.750 0.550 0.470 0.500 0.500 0.500 0.600 0.450 0.450 0.350 0.320 0.290 0.330 0.140 0.150 0.105 0.260 0.100 0.115 1.100 Polyester film + Glass Polyester film + Glass Polyester film + Polyester Polyester film + Polyester Aluminum foil, matte Aluminum foil, matte Aluminum foil, matte Aluminum foil, matte Aluminum foil, matte Aluminum foil, matte Aluminum foil, matte Aluminum foil, glossy Aluminum foil, glossy Aluminum foil, glossy Stainless foil Aluminum foil + Woodfree paper Aluminum foil + Woodfree paper Aluminum foil + Glass cloth Aluminum foil + Glass cloth Aluminum foil + Glass cloth Aluminum foil + Glass cloth Polyethylene net Polyethylene net Polyethylene net Polyethylene net Polyethylene net Polyethylene net Polyethylene net Polyethylene fabric Nonwoven polyester fabric Polypropylene film Polyethylene fabric + Aluminum foil Polyethylene net Aluminum foil Polyester film + Aluminum foil Polyester film + Aluminum foil Aluminum foil + Polyester film PE laminate + Synthetic fabric (black) Polyethylene laminated cloth Polyethylene laminated cloth Polyethylene laminated cloth Polyethylene fabric Polyethylene fabric Polyethylene laminated synthetic cloth Polyethylene laminated cloth (yellowblack) Printed film (red white) + Reflective layer Printed film (yellowblack) + Reflective layer Special foam polyethylene (White) Nonwoven polypropylene fabric/ Nonwoven polyethylene fabric Polyethylene film + Nonwoven polyester fabric Nonwoven polyester fabric + Polyethylene film Matte aluminum foil + Nonwoven polyethylene fabric Glossy aluminum foil + Nonwoven polyethylene fabric Backing material Remarks (mm) 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.040 Rubber Synthetic rubber Rubber Rubber Acrylic Acrylic Silicone Acrylic Acrylic Acrylic Acrylic Acrylic Acrylic Acrylic Acrylic Synthetic rubber Synthetic rubber Acrylic Synthetic rubber Acrylic Silicone Synthetic rubber Synthetic rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber (white) Acrylic Butyl rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber Rubber Rubber Rubber Acrylic Acrylic Acrylic Rubber Acrylic Acrylic Acrylic 1st surface 2nd surface Butyl rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber Butyl rubber (white) Acrylic N/10mm 3.90 5.01 4.65 4.65 4.51 5.30 7.00 9.00 4.00 4.00 6.00 4.51 5.30 4.00 13.70 5.70 ※2 6.60 ※2 4.70 15.68 7.50 5.00 11.76 11.76 13.73 7.84 7.84 9.80 13.73 15.68 7.84 19.60 9.40 7.84 7.85 7.05 9.81 7.80 7.84 11.76 10.00 10.00 7.40 2.94 2.94 2.94 2.80 3.60 2.65 2.94 3.88 ※2 3.88 ※2 6.28 ※2 1st surface Adhesion Adhesive 2nd surface Tensile strength:696.0N/10mm Tensile strength:697.0N/10mm Tensile strength:320.0N/10mm Tensile strength:320.0N/10mm 0perating temperature limit :-10~100℃ 0perating temperature limit :-30~130℃ 0perating temperature limit :-30~300℃ 0perating temperature limit :-10~130℃、No release liner 0perating temperature limit :0~100℃、 ※1 0perating temperature limit :0~100℃、No release liner※1 0perating temperature limit :0~100℃、No release liner※1 0perating temperature limit :-10~100℃ 0perating temperature limit :-30~130℃ 0perating temperature limit :0~100℃、 ※1 0perating temperature limit :-10~130℃ 0perating temperature limit :-10~80℃ 0perating temperature limit :-10~80℃、No release liner 0perating temperature limit :-20~130℃ 0perating temperature limit :-10~80℃ 0perating temperature limit :-20~130℃ 0perating temperature limit :-30~250℃ 0perating temperature limit :-10~80℃ 0perating temperature limit :-10~80℃ Water vapor permeability 2.5/m 2 24Water vapor permeability 0.5/m 2 24Water vapor permeability 1.0/m 2 24No.333035 Thickness 0.310mm "Floor Masking Tape"Floor masking use "Protec Tape"Building masking use "Masking Cut Light Tape"masking use N/10mm 13.73 7.84 7.84 9.80 13.73 15.68 7.84 15.68 6.28 ※2 B C D Technical Data http://sliontec.maxell.co.jp Adhesive Tapes for Construction and Civil Engineering 1907 b :web International Sales Section Sales development Department TEL:81-44-935-2485 FAX:81-44-933-6915 TEL:81-44-922-1241 FAX:81-44-922-1291 Head Office : Kawasaki Sales Office : Tokyo, Nagoya, Osaka, Saitama, Hiroshima, Fukuoka Production Sites : Kawasaki, Yamanashi and Kyoto 3819,Noborito,Tama-ku,Kawasaki,214-0014, Japan ISO9001 ISO14001 approved http://sliontec.maxell.co.jp 1 Environmentally sensitive adhesive. (Solvent free) 2 Measured by 90° peel. Test method : JIS Z 0237 The values measured are referential only, not guaranteed value. The spec of the product maybe changed without prior notice. Please check that the tape suits your application before use. Take care when using the tape as Sliontec shall not be held liable for damage occurring as a result of using the tape. Recommended waterproof tape of JAPAN FIBER REINFORCED CEMENT SIDINGS MANUFACTURERS ASSOCIATION Water vapor permeability 1.2/m 2 24h、Recommended waterproof tape of JAPAN FIBER REINFORCED CEMENT SIDINGS MANUFACTURERS ASSOCIATION Recommended waterproof tape of JAPAN FIBER REINFORCED CEMENT SIDINGS MANUFACTURERS ASSOCIATION

Technical Data Adhesive Tapes forsliontec.maxell.co.jp/en/products/catalog/pdf/construct_e.pdf · Aluminum foil, matte Aluminum foil, matte Aluminum foil, matte Aluminum foil, matte

  • Upload
    others

  • View
    43

  • Download
    0

Embed Size (px)

Citation preview

A911091169510951480108060806380658070807180738110816081708824980098079810981298159817989098915988593859575931593259335958590134944420612092419244928092909830983698399940

3330/3335337234303440344834893362SS965196525567

Productnumber

Thickness(mm)

0.1900.1800.1700.1700.0950.1050.1000.1000.0800.0800.1000.0950.1050.0800.1200.1050.1400.1950.2100.2000.2100.1500.1500.4500.5000.7001.0002.0003.0000.4501.0000.1730.7500.5500.4700.5000.5000.5000.6000.4500.4500.3500.3200.2900.3300.1400.1500.1050.2600.1000.1151.100

Polyester film + Glass

Polyester film + Glass

Polyester film + Polyester

Polyester film + Polyester

Aluminum foil, matte

Aluminum foil, matte

Aluminum foil, matte

Aluminum foil, matte

Aluminum foil, matte

Aluminum foil, matte

Aluminum foil, matte

Aluminum foil, glossy

Aluminum foil, glossy

Aluminum foil, glossy

Stainless foil

Aluminum foil + Woodfree paper

Aluminum foil + Woodfree paper

Aluminum foil + Glass cloth

Aluminum foil + Glass cloth

Aluminum foil + Glass cloth

Aluminum foil + Glass cloth

Polyethylene net

Polyethylene net

Polyethylene net

Polyethylene net

Polyethylene net

Polyethylene net

Polyethylene net

Polyethylene fabric

Nonwoven polyester fabric

Polypropylene film

Polyethylene fabric + Aluminum foil

Polyethylene net + Aluminum foil

Polyester film + Aluminum foil

Polyester film + Aluminum foil

Aluminum foil + Polyester film

PE laminate + Synthetic fabric (black)

Polyethylene laminated cloth

Polyethylene laminated cloth

Polyethylene laminated cloth

Polyethylene fabric

Polyethylene fabric

Polyethylene laminated synthetic cloth

Polyethylene laminated cloth (yellow・black)

Printed film (red・white) + Reflective layer

Printed film (yellow・black) + Reflective layer

Special foam polyethylene (White)

Nonwoven polypropylene fabric/Nonwoven polyethylene fabric

Polyethylene film + Nonwoven polyester fabric

Nonwoven polyester fabric + Polyethylene film

Matte aluminum foil +Nonwoven polyethylene fabric

Glossy aluminum foil +Nonwoven polyethylene fabric

Backing material Remarks

(mm)----

0.0500.0500.0500.0500.0500.0500.0500.0500.0500.0500.040-------------------------------------

Rubber

Synthetic rubber

Rubber

Rubber

Acrylic

Acrylic

Silicone

Acrylic

Acrylic

Acrylic

Acrylic

Acrylic

Acrylic

Acrylic

Acrylic

Synthetic rubber

Synthetic rubber

Acrylic

Synthetic rubber

Acrylic

Silicone

Synthetic rubber

Synthetic rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber (white)

Acrylic

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Rubber

Rubber

Rubber

Acrylic

Acrylic

Acrylic

Rubber

Acrylic

Acrylic

Acrylic

1st surface 2nd surface

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber

Butyl rubber (white)

Acrylic

N/10mm3.905.014.654.654.515.307.009.004.004.006.004.515.304.0013.705.70※2

6.60※2

4.7015.687.505.0011.7611.7613.737.847.849.8013.7315.687.8419.609.407.847.857.059.817.807.8411.7610.0010.007.402.942.942.942.803.602.652.94 3.88※2

 3.88※2

 6.28※2

1st surface

AdhesionAdhesive

2nd surface

Tensile strength:696.0N/10mm

Tensile strength:697.0N/10mm

Tensile strength:320.0N/10mm

Tensile strength:320.0N/10mm

0perating temperature limit:-10~100℃

0perating temperature limit:-30~130℃

0perating temperature limit:-30~300℃

0perating temperature limit:-10~130℃、No release liner

0perating temperature limit:0~100℃、※1

0perating temperature limit:0~100℃、No release liner、※1

0perating temperature limit:0~100℃、No release liner、※1

0perating temperature limit:-10~100℃

0perating temperature limit:-30~130℃

0perating temperature limit:0~100℃、※1

0perating temperature limit:-10~130℃

0perating temperature limit:-10~80℃

0perating temperature limit:-10~80℃、No release liner

0perating temperature limit:-20~130℃

0perating temperature limit:-10~80℃

0perating temperature limit:-20~130℃

0perating temperature limit:-30~250℃

0perating temperature limit:-10~80℃

0perating temperature limit:-10~80℃

Water vapor permeability:2.5g/m2・24h

Water vapor permeability:0.5g/m2・24h

Water vapor permeability:1.0g/m2・24h

No.333035 Thickness 0.310mm

"Floor Masking Tape"、Floor masking use

"Protec Tape"、Building masking use

"Masking Cut Light Tape"、masking use

N/10mm

13.737.847.849.8013.7315.687.8415.68

 6.28※2

B

C

D

Technical Data

http://sliontec.maxell.co.jp

Adhesive Tapes for Construction and Civil Engineering

1907 b : web

International Sales SectionSales development Department

TEL:81-44-935-2485 FAX:81-44-933-6915

TEL:81-44-922-1241 FAX:81-44-922-1291

Head Office : Kawasaki  Sales Office : Tokyo, Nagoya, Osaka, Saitama, Hiroshima, Fukuoka  Production Sites : Kawasaki, Yamanashi and Kyoto

3819,Noborito,Tama-ku,Kawasaki,214-0014,Japan

ISO9001ISO14001approved

http://sliontec.maxell.co.jp

※1 Environmentally sensitive adhesive. (Solvent free) ※2 Measured by 90° peel.○Test method: JIS Z 0237 ○The values measured are referential only, not guaranteed value.

○The spec of the product maybe changed without prior notice.  ○Please check that the tape suits your application before use.  ○Take care when using the tape as Sliontec shall not be held liable for damage occurring as a result of using the tape.

Recommended waterproof tape of JAPAN FIBER REINFORCED CEMENT SIDINGS MANUFACTURERS ASSOCIATION

Water vapor permeability:1.2g/m2・24h、Recommended waterproof tape of JAPAN FIBER REINFORCED CEMENT SIDINGS MANUFACTURERS ASSOCIATION

Recommended waterproof tape of JAPAN FIBER REINFORCED CEMENT SIDINGS MANUFACTURERS ASSOCIATION

D Danger indicators

D Danger indicators (reflective)

You never would have guessed it, but Maxell tapes are everywhere.With the advancement of construction techniques, adhesive tapes are being used on all scenes of modern construction and civil engineering, from large scale facilities and buildings to conventional homes.Additionally, adhesive tapes have become a key element in the further streamlining, simplifying, cost efficiency, and environmental response of construction projects.Maxell offers superior adhesive tapes through high-quality, low-cost oriented research and development and a highly dependable, experienced system of production.

FactoriesOur butyl tape is optimal for various uses such as a sealing material for the overlapped sections of seam jointed metal roofs used in facilities such as factories and as an airtight sealing material in the piping of refrigerated storage units. Our tape maintains a balanced, high level of adhesive force over a wide temperature range for extended periods of time.

NO.9839Super Butyl Tape

Thickness 0.450mm

For dampproofing of urethane foam heat-insulating materials. For waterproofing. For flashing outdoor.

Single coated

NO.5931Super Butyl Tape

Thickness 1.000mm

For use on metal roofing and as temporary waterproofing on external wall materials. Highly adhesive. Durable and water resistant. Watertight.

Double coated

NO.3362SSTape for use as danger indicators

Thickness 0.260mm

For use as danger indicators at construction sites, walkways, factories, and train stations. Colors: Yellow and black.

Single coated

Polyethylene laminated clothRubber adhesive

Aluminum foil(25μm)Polyester film(25μm)Butyl rubber adhesiveRelease paper

Butyl rubber adhesivePolyethylene netButyl rubber adhesiveRelease paper

Nonwoven polyester fabricButyl rubber adhesiveRelease paper

NO.9651Reflective tape

Thickness 0.100mm

For use as danger indicators at construction sites, walkways, factories, and train stations. Highly reflective. Colors: Red and white.

Single coated

NO.4420Super Butyl Tape

Thickness 0.750mm

For repairing of metal roofing. Good durability and water resistance. Water vapor permeability: 2.5g/m2・24h For waterproofing membrane.

Single coated

Construction SitesBy adhering tapes such as those indicating dangerous and restricted areas, cautions, and safety messages, people passing by construction sites will easily recognize hazards. Not only do these tapes tear easily by hand, they adhere excellently to rough surfaces such as concrete and plywood.

Printed filmGlass beadsAluminum vapor depositionAcrylic adhesiveRelease paper

Printed filmGlass beadsAluminum vapor depositionAcrylic adhesiveRelease paper

NO.9652Reflective tape

Thickness 0.115mm

For use as danger indicators at construction sites, walkways, factories, and train stations. Highly reflective. Color:Yellow/Black

Single coated

C Lifeline public utility conduit NO.4420Super Butyl Tape

Thickness 0.750mm

Timber framed construction. For home waterproofing and patching. Excellent durability and water resistance.

Single coated

NO.9244Super Butyl Tape

Thickness 0.500mm

For home waterproofing. Excellent durability and water resistance.

Single coated

Public Facilities (waterproofing)Our butyl tapes, with their superior waterproofing and air-tightening properties, are used as waterproofing seals for the lifeline public utility conduits of the infrastructure of large scale public facilities such as universities, general hospitals, and convention centers.

C Repair of roofing

C Waterproofing (metal roof)

Nonwoven polyester fabricButyl rubber adhesiveRelease paper

Nonwoven polyester fabricPolyethylene filmButyl rubber adhesiveRelease paper

Excellent adhesive properties

●Strong adhesion for various types of materials

Adhesion to stainless steel plates

0

2

4

6

8

Adhe

sion(

N/1

0mm)

No.9510 No.9110 No.6200 Cloth tape

Tensile strength

No.9510 No.9110 No.6200 Cloth tape0

200

400

600

800

Temperature dependency of adhesive of aluminum tapes

Measurements were taken by affixing the tape to a stainless steel plate, pressure bonding it by rolling a 2 kg roller back and forth over it 5 times, letting it rest at a controlled temperature for 20 minutes, and then immediately peeling the tape off using 180。 peeling.

00-20 20 40 60 80 100 150 200 240(℃)

4

8

12

16

Temperature

No.8060・8160No.8010・8110

No.8063

Adhesion after heat cycle test

0

4

8

12

16

0 1 3 5 7 (times)cycle

Tape was pressure bonded by rolling a 2 kg roller back and forth 5 times over it. Measurements were taken in compliance with JIS Z 0237.

Adhesion after weatherability test

Adhesion relative to different adherend

Test plate: Stainless steel plate Application Conditions: 23。C×50%RHExposure Conditions: Weather-O-meter (18 minute rainfall during a 120 minute period )Measurement Conditions:Following exposure, test plate was left to rest for 24 hours at 23。C and 50% relative humidity. Then, tape was peeled using the 180。 peeling method.

Tape

Adherend

Stainless steel plate

Aluminum plate

Acrylic coated plate

PVC board

Glass plate

Polyethylene board

Plywood

5.3(1,350)

7.4(1,880)

6.2(1,590)

13.3(3,400)

7.1(1,810)

1.7( 440)

3.3( 850)

No.8060No.8160

No.8010No.8110

N/10mm (gf/25mm)

5.9(1,500)

5.2(1,330)

6.5(1,650)

6.7(1,700)

5.9(1,510)

1.7( 430)

1.9( 850)

No.8063

N/10mm (gf/25mm)

4.5(1,150)

6.4(1,620)

5.3(1,340)

8.3(2,120)

6.8(1,740)

1.9( 480)

4.9(1,260)

N/10mm (gf/25mm)

●Excellent in low temperature adhesive properties and operationability

0-20 -10 0 10 20 30 40 50

8

4

12

16

20

Temperature(℃)

Adherend Stainless steel plate

Adhe

sion(

N/10

mm)

0

8

4

12

16

Adhe

sion(

N/10

mm)

Stainless steel plate

Aluminum

plate

Glass plate

Copper plate

Slate plate (surface)

Slate plate (backside)

Bakelite plate

PVC plate

Polyethylene plate

EPT-butyl rubber sheet

Plywood

Excellent durability

●Can be used outside without worry●Durable even in severe environmental changes

0 10 20 30 40

16

8

24

32

40

cycle(times)

1 cycle: (80℃×8h)→(In 20℃ water×16h)

Adhe

sion(

N/10

mm)

0

16

8

24

32

Exposure to sunshine(hours)

Adhe

sion(

N/10

mm)

300100 500 1000

Based on Weather-O-meter(Sunshine apply on the test plate under 20℃)Apply at 20℃ →Exposure to sunshine→20℃×65RH×24h→Measurement

Precipitation cycle:18 minute rainfall during a 120 minute period.

N/10mm

Adhe

sion(

N/1

0mm)

Adhe

sion(

N/1

0mm)

00 100 200 300 500 (hours)

4

8

12

16

Exposure to sunshine

Adhe

sion(

N/1

0mm)

A Filament Tape Adhesion Properties

B Aluminum Tape Adhesion Properties

C Super Butyl Tape Adhesion Properties

Test plate: Stainless steel plate Application Conditions: 23。C×50%RH1 cycle: (0。C×24h ) + (70。C water×24h) + (80。C×24h )Measurement Conditions:Following the heat cycle, test plate was left to rest for 24 hours at 23。Cand 50% relative humidity. Then, tape was peeled using the 180。 peeling method.

Characteristic values are examples of No.5931 and are not guaranteed values.

Characteristic values are examples of No.5931 and are not guaranteed values.

Excellent heat and cold resistant properties

●Excellent in high temperature cohesion

80100120

80

100

120

2

〔-0.3. 0〕

〔-1.3. +0.5〕

〔-1.5. +0.5〕

Temperature Days passedItems

Appearance(visual observation)

Heat expansion%

(vertical, horizontal)Extension:plus

No cracksNo sags (heat flow) of adhesive

〔-0.5. 0〕

〔-1.4. +0.5〕

〔-1.8. 0〕

5

〔-0.7. 0〕

〔-1.5. +0.5〕

〔-2.0. 0〕

10

〔-0.8. 0〕

〔-1.6. +0.5〕

〔-2.2. 0〕

15

●Excellent in low temperature flexibility

Adherend Measuring temperature

100μm polyethylene film ◎◎Kent paper

-30℃○○

-40℃△△

-50℃×△

-60℃

C Waterproofing (stands) NO.4420Super Butyl Tape

Thickness 0.750mm

Timber framed construction. For home waterproofing and patching. Excellent durability and water resistance.

Single coated

StadiumsButyl tape has the superior adhesive properties needed to waterproof the concrete joints in the stands of outdoor sporting facilities such as international sporting arenas, baseball fields, and soccer stadiums.

NO.9244Super Butyl Tape

Thickness 0.500mm

For home waterproofing. Excellent durability and water resistance.

Single coated

Nonwoven polyester fabricButyl rubber adhesiveRelease paper

Nonwoven polyester fabricPolyethylene filmButyl rubber adhesiveRelease paper

PC joint and waterproof coating insulation

Waterproof coatingSuper Butyl Tape (No.4420)

CaulkingPC plate

B Joint insulation NO.8070Aluminum tape (matte)

Thickness 0.080mm

For air-conditioning duct sealing, and joint sealing of heat insulation material.

Single coated

Buildings and ApartmentsA superior tape which offers air-tightening, durabil ity, anti-humidity and anti-aging properties for the sealing of duct joints and insulation joints, and the waterproofing of roofs. Additionally, this tape can be used to mask steel beams, rebar, steel pipes, and concrete surfaces of outdoors which are exposed to adverse conditions. We even have a masking tape that is optimal for preventing dust from scattering when working indoors. These products support a wide range of building projects from housing complexes to office and tenant buildings.

NO.9810Aluminum glass cloth tape

Thickness 0.195mm

For air conditioning duct sealing. Joint sealing of heat insulation material. Wide range of application temperature. Good adhesion under cold temperature.

Single coated

Aluminum foil (50μm)Acrylic adhesiveRelease paper

Aluminum foilBondGlass clothAcrylic adhesiveRelease paper

NO.9244Super Butyl Tape

Thickness 0.500mm

For home waterproofing and patching. Excellent durability and water resistance.

Single coated

Nonwoven polyester fabricPolyethylene filmButyl rubber adhesiveRelease paper

A Bundling (main cables) NO.9110Filament Tape

Thickness 0.190mm

For binding and fixing the ends of steel sheet coils. High tensile strength.

Single coated

Large Suspension BridgesFilament tapes, with their shock, weather, and water resistant properties are used as a superior heavy bundling material in the main cables of large suspension bridges. Additionally, these tapes are excellent as a binding material for wires and steel sheet coils, and for fixing the ends of transformer coils.

NO.9510Filament reinforced tape

Thickness 0.170mm

Anti-staining property. For temporary fixing of home appliances. Available color :

Single coated

Polyester film (19μm)Glass fiberRubber adhesive

The photograph to the left shows 5 mm diameter piano wires bound in a hexagonal shape (1 strand). This strand (bundle) is combined with many others like it to form the cables that support large suspension bridges.

Polyester film (19μm)Polyester fiberRubber adhesive

D Floor masking, Moving

Single Family Home (masking)

NO.3489Masking Tape

Thickness 0.105mm

Used in interior construction and renovation.

Single coated

Polyethylene laminated synthetic fiber clothAcrylic adhesive

Polyethylene fabricAcrylic adhesive

Polyethylene fabricAcrylic adhesive

NO.3448Masking Tape

Thickness 0.150mm

Used in interior construction and renovation. Products with plastic cores available.

Single coated

A high level of workability and functionality is demanded of masking work during a move. Our tapes are easy to tear by hand, leave no sticky residue, and maintain high dimensionali-ty in both fixing force and removability.

Moving

NO.3440Masking tape

Thickness 0.140mm

For fixing masking sheet for interior finish work and refurbishing.

Single coated

Homes employing 2x4 construction are built from the ground up. Therefore, masking of the floors is necessary for the long-term protection of floors. The tape having easy removability and good workability is used for fixing surface protection sheets.

Floor masking

C Fixing of waterproofing sheets

Single Family Home(waterproofing, air-tightening)

NO.9244Super Butyl Tape

Thickness 0.500mm

For waterproofing of houses. Good durability and water resistance.

Single coated

D Masking (painting)Environmentally friendly

NO.4420Super Butyl Tape

Thickness 0.750mm

Timber framed construction. For home waterproofing and patching. Excellent durability and water resistance.

Single coated

Nonwoven polyester fabricButyl rubber adhesiveRelease paper

NO.3372Cloth Masking Tape

Thickness 0.290mm

For general masking. Excellent resistance to weather.

Single coated

NO.3430Cloth Masking Tape

Thickness 0.330mm

For construction use. Outstanding resistance to weather. High strength backing material.

Single coated

NO.3330/3335Cloth Masking Tape

Thickness 0.320mm

For securing masking sheets such as protec-tive plastic laid down when painting.

Single coated

Polyethylene laminated clothRubber adhesive

Polyethylene laminated clothRubber adhesive

Polyethylene laminated clothRubber adhesive

C Waterproofing (roof)

Waterproof coating

Caulking

No.4420

Waterproofing Sheet

Base concrete Adhesion bond

Joint construction Top coat

D Exterior wall

Single family home (Other application)

B Floor heatingNO.5567D/C PE foam tape

Thickness 1.100mm

For use with an adhesive when fixing interior finishing materials. Used as a temporary fixing agent until the adhesive hardens.

Acrylic adhesiveSpecial foam polyethylene (White)Acrylic adhesiveRelease paper

Aluminum foil (50μm)Acrylic adhesiveRelease paper

Aluminum foil (50μm)Acrylic adhesive

NO.9244Super Butyl Tape

Thickness 0.500mm

For home waterproofing and patching. Excellent durability and water resistance.

Single coated

Nonwoven polyester fabricPolyethylene filmButyl rubber adhesiveRelease paper

NO.4420Super Butyl Tape

Thickness 0.750mm

Timber framed construction. For home waterproofing and patching. Excellent durability and water resistance.

Single coated

Nonwoven polyester fabricButyl rubber adhesiveRelease paper

NO.8070Aluminum tape (matte)

Thickness 0.080mm

For use securing heat dispersion and home electronics. Excellent resistance to heat and cold. Long product.

Single coated

NO.8071Aluminum tape (matte)

Thickness 0.080mm

For use securing heat dispersion and home electronics. Excellent resistance to heat and cold. Long product.

Single coated

D Interior panel

The tape is used as a jointing structure when applying outer wall tiles with adhesive on a siding substrate. It relieves the stress on the tiles and prevents from cracking.

Exterior wallThis double-coated tape is used together with adhesives during renovation projects to temporarily affix building materials such as wall panels, decorative panels, and kitchen panels, and also to affix interior panels. Its superior initial adhesion and ability to adhere to uneven surfaces make the streamlining of fixing tasks possible.

Interior panelThis aluminum tape with superior initial adhesion and durability can be used when fixing panels during installation of floor heating panels. Additionally, by applying aluminum tape, heat is transferred uniformly throughout the heating system and hot/cold spots can be eliminated.

Floor heating

Double coated

Existing floor

Floor heating panel

Floor heating flooring

Adhesive

Tape

These butyl tapes are primarily used for waterproofing and air-tightening around the joints and openings of structure. These tapes exhibit high adhesive force and durability on all surfaces, remain pliable at low temperatures, and adhere well to rough surfaces. Furthermore, these tapes have sound dampening and vibration absorbing properties which allow for a wide range of use.

Nonwoven polyester fabricPolyethylene filmButyl rubber adhesiveRelease paper

NO.5958Super Butyl Tape

Thickness 0.450mm

Recommended waterproofing tape of JAPAN FIBER REINFORCED CEMENT SIDING MANUFACTURERS ASSOCIATION. For waterproofing of houses. For dampproofing and air-tightening of openings.

Double coated

Butyl rubber adhesiveNonwoven polypropylene fabric / nonwoven polyethylene fabricButyl rubber adhesiveRelease paper

C Joint of airtightening sheet

NO.9940Super Butyl Tape

Thickness 0.350mm

For jointing of airtightening sheet. Good hand tearability and conformability. Water vapor permeability: 1.0g/m2・24h

Single coated

Polyethylene laminatedsynthetic clothButyl rubber adhesive

NO.3494Flat yarn cloth adhesive tape

Thickness 0.173mm

For fixing and jointing of interior side of vapor protection sheet at residential. For joint sealing of heat insulation sheet of exterior covering heat insulation.

Single coated

Polyethylene fabricSynthetic Resin PSA

C Waterproofing of balcony

NO.4420Super butyl tape

Thickness 0.750mm

For waterproofing of timber-framed houses. Good durability and water resistance. Water vapor permeability: 2.5g/m2・24h

Single coated

NO.5931Super butyl tape

Thickness 1.000mm

For sheet metal. For waterproofing and temporary fixing of exterior walls. For various types of waterproofing.

Double coated

Nonwoven polyester fabricButyl rubber adhesiveRelease paper

Butyl rubber adhesivePolyethylene netButyl rubber adhesiveRelease paper

Girder joints

Fixing of water proofing sheets

Around sashesVeranda corners

and edges

Panel joints

Sash boardcorners

Roof board joints,Roof vertex, cornersExhaust outlets

Apply at 20℃→Leave at 65℃×24h→Each measureing temperature×2h cooling→bent as if wrapping a colled pipe(φ  in.).(Wrapping was also conducted under the same measuring temperature.)

◎:No abnormalities ○:The tape never came off the adherend, although flexibility of it was reduced. △:The tape never came off the adherend ,although flexibility of it was lacked and tape was bent.×:The flexibility of the adhesive disappers. The tape was bent and peeled off the surface.Test method:According to Fed. Test method std. No. 101B, Method 2051 (American Federal Temperatures).

Evaluation

Environmentally friendly

Environmentally friendly