Technical catalogue - Soltec › wp-content › uploads › 2017 › 03 › ...Shutter V External screen type Rolo V with Zn plated steel roller axle Φ70 .Weighting Φ26 mm profile

www.soltec.si

V

Balance of light and shade.

Shutters

Sun Protection Systems

Technical catalogue

si_soltec_techcat09_rolov.indd 1 11/17/09 10:47 PM

V

2

H

110

110

Shutters

Technical catalogue / Shutters / V

Shade name: Shutter V

ID No.: SOL V - 002

Drive: Motor

Cartridge: No

Guides: Alu 18 x 30 mm

Assembling: Onto the window

Dimensions: Maximum width is 500cm, height in this case depends on maximum surface of linen being 16 m2.

Control:Usually the motor is controlled by a switch or remote control. The following options are also possible if electrical plans are provided by the manufacturer:• group control by means of a main switch and/or

individual switch;• group control by means of a switch and/or individually

over remote control;• control in connection with sensors such as: wind/sun/

time/rain sensor;• control in connection with a computer (»smart house«

system).

External screen shutter type V with roller axle Alu Φ50 or galvanized steel Φ70 mm. Weighting profile Φ20 mm is equipped with guides. Alu extruded guides are painted in RAL upon wish. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by motor.

Design description

Shutter V

Shade name Shutter V - Alu Guides

ID No. SOL V - 002

Drive Motor


3

H

110

110

60



Shade name Shutter V

ID No. SOL V - 003

Drive Motor


ID No.: SOL V - 003

Drive: Motor

Cartridge: No

Guides: Inox braided cable Ø 3 mm


Dimensions: Maximum width is 500 cm, height in this case depends on maximum surface of linen being 16 m2.

Design description

Shutter V

External screen shutter type V with a roller axle Alu Φ50 or galvanized steel axle Φ70 mm. Weighting profile Φ20 mm is equipped with guides. Inox braided cable Φ3 mm is fixed with Alu end parts into window frame. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by motor.





system).


V

4

Shutters



ID No.: SOL V - 004

Drive: Motor

Cartridge: No


Assembling: Into the ceiling, removed from the window or on facade line.

Dimensions: Maximum width is 500 cm, height depends in this case on maximum surface of linen being 16 m2.

Design description

Shutter V

External screen type Rolo V with Zn plated steel roller axle Φ70 .Weighting Φ26 mm profile is equipped with weights. Inox braided cable Φ 5 mm is fixed with Inox bracket below. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by motor with possibility of sun/wind automatics.





system).


5

H

105

110

H

108

110




ID No. Shutter V - 004 - 2

Drive Motor

Shade name Shutter V - Balcony design

ID No. Shutter V - 004 -1

Drive Motor

steel 3 mm steel 3 mm

Inox braided cable Inox braided cable


V

6

H

110

110

Shutters


Shade name Shutter V - Alu guides

ID No. SOL V - 005

Drive Manual - windlass


ID No.: SOL V - 005SOL V - 006

Drive: Manual - windlass

Cartridge: No

Guides: Alu dimensions 18 x 30 mm



External screen shutter type V with a Φ43 mm roller galvanized steel axle. Weighting profile Φ20 mm is equipped with guides. Alu extruded guides painted in RAL upon wish. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by windlass.

Design description

Shutter V


7

110

min 25 mm

106

115




ID No. SOL V - 005 - 2


Detail Ground plan

Shade name Shutter V - under faceade

ID No. SOL V - 006


Detail Assembling under the facade


V

8

Shutters


Shade name: SOLTEC Shutter V

ID No.: SOL V - 007


Cartridge: No




External screen shutter type V with Zn plated steel roller axle Φ43 mm. Weight profile Φ20 mm is equipped with guides. Inox braided cable Φ 3 mm is fixed with Alu end parts into window frame. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by windlass.

Design description

Shutter V


9

H

60

110

110



Shade name Shutter V - Inox braided cable

ID No. SOL V - 007



V

10

Shutters



ID No.: SOL V - 008


Cartridge: No


Assembling: Into the ceiling, removed from the window or facade line


External screen shutter type V with Zn plated steel roller axle Φ60 .Weight profile Φ26 mm is equipped with weight. Inox braided cable Φ 5 mm with Inox bracket. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by windlass. Possibility of windlass take down.

Design description

Shutter V


11

110

110

H



Shade name Shutter V - Inox braided cable

ID No. Shutter V - 008 -1


jeklo 3 mm

Inox braided cable


V

12

Shutters



ID No.: SOL V - 001SOL V - 001 - 1

Drive: Motor

Cartridge: No

Guides: No

Assembling: Above the window or into the ceiling,in the ceiling kineta or behindthe mask


Interior screen shutter type V with Alu roller axle Φ50 mm or Zn plated steel axle Φ70 mm.Weight profile Φ20 mm is equipped with weight. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is inside from the ST, SA, S group, color can be selected. Driven by motor.

Design description

Shutter V


13

105

110

105

110



Shade name Shutter V - internal

ID No. SOL V - 001 - 1

Drive Motor

Detail Mask

Shade name Shutter V - internal

ID No. SOL V - 001

Drive Motor


V

14

Shutters



ID No.: SOL V - 009


Cartridge: No

Guides: No

Assembling: Above the window or into the ceiling, in the ceiling kineta or behind the mask


Interior screen shutter type V with Zn plated steel roller axle Φ43 mm.Weight profile Φ20 mm is equipped with weight. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is inside from the ST, SA, S group, color can be selected. Driven by windlass. Possibility of windlass take down.

Design description

Shutter V


15

110

105




ID No. SOL V - 009

Drive Manual - removable windlass


Soltec - Sun Protection Systems, MIPO d.o.o., Obrtna ulica 9, 8257 Dobova, Slovenia

t +386 (0)7 45 22 126, f +386 (0)7 45 22 128, e [email protected], www.soltec.si

Balance of light and shade.


Documents

Technical catalogue - Soltec › wp-content › uploads › 2017 › 03 › ...Shutter V External screen type Rolo V with Zn plated steel roller axle Φ70 .Weighting Φ26 mm profile