4
BRUCE'S CUSTOM COVERS 18850 Adams Ct Morgan Hill, CA 95037 www.aircraftcovers.com Phone: 408/738-3959 Toll Free (U.S.): 800/777-6405 Fax: 408/738-2729 Email: [email protected] a div. of Aircraft Covers Inc. manufacturer of the finest custom-made aircraft covers Tech Sheet: Northrop F-5 Freedom Fighter (northrop-F5.pdf) Canopy/Nose Cover (shown on single seat model) Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft. The Northrop F-5 Freedom Fighter Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements, if applicable. The Canopy Cover is designed to enclose the windshield, side windows and canopy roof. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. When requested, it is also sometimes possible to design Canopy covers that can attach to the aircraft fuselage using pop-riveted snap-heads at the rear and snap-head screws on the engine cowl. The Canopy Cover is custom sewn and the corners are trimmed to match the colors of the airplane. The airplane's registration number can be imprinted onto both sides of the cover for an additional charge. A duffle bag is included with all Canopy Covers. Each Canopy Cover is normally made from Silver Acrylic Sunbrella or Silver Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Bruce's Custom Covers developed these materials especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The materials are extremely reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on even the hottest of days. It is water, ice and snow repellent, yet breathable enough to allow moisture to escape from between the cover and the aircraft surface. Our materials do not contain hydrocarbon compounds that can harm Plexiglas windshields and acrylic finishes. Other colors are available. Please [contact us](/contact) for availability and price. We also have an ultra lightweight material available for fitted Technical Sheet: Northrop F-5 Freedom Fighter Page 1

Tech Sheet: Northrop F-5 Freedom Fighter · Current Products List (as of 6/23/18) Description Part No. Price CANOPY COVER, single seat model F5-000 $665.00 CANOPY COVER, dual seat

Embed Size (px)

Citation preview

Page 1: Tech Sheet: Northrop F-5 Freedom Fighter · Current Products List (as of 6/23/18) Description Part No. Price CANOPY COVER, single seat model F5-000 $665.00 CANOPY COVER, dual seat

BRUCE'S CUSTOM COVERS18850 Adams CtMorgan Hill, CA 95037www.aircraftcovers.com

Phone: 408/738-3959Toll Free (U.S.): 800/777-6405

Fax: 408/738-2729Email: [email protected]

a div. of Aircraft Covers Inc. manufacturer of the finest custom-made aircraft covers

Tech Sheet: Northrop F-5 Freedom Fighter(northrop-F5.pdf)

Canopy/Nose Cover (shown on single seat model)

Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they caneliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean andhelp prevent vandalism and theft.

The Northrop F-5 Freedom Fighter Canopy Cover is custom designed for each model, as well as your aircraft's specificantenna and temperature probe placements, if applicable. The Canopy Cover is designed to enclose the windshield, sidewindows and canopy roof. The Canopy Cover attaches using adjustable "belly straps", which run under the belly andconnect to the other side of the cover with a quick-release plastic buckle.

When requested, it is also sometimes possible to design Canopy covers that can attach to the aircraft fuselage usingpop-riveted snap-heads at the rear and snap-head screws on the engine cowl.

The Canopy Cover is custom sewn and the corners are trimmed to match the colors of the airplane. The airplane'sregistration number can be imprinted onto both sides of the cover for an additional charge. A duffle bag is included with allCanopy Covers. Each Canopy Cover is normally made from Silver Acrylic Sunbrella or Silver Solution-Dyed Polyester and islined 100% with a soft and smooth microfiber. Bruce's Custom Covers developed these materials especially for aircraftprotection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. Theinner lining is a very soft and smooth microfiber to prevent scratching. The materials are extremely reflective, and tests showthat the cabin interior temperature can be reduced to near-ambient temperature on even the hottest of days. It is water, iceand snow repellent, yet breathable enough to allow moisture to escape from between the cover and the aircraft surface. Ourmaterials do not contain hydrocarbon compounds that can harm Plexiglas windshields and acrylic finishes. Other colors areavailable. Please [contact us](/contact) for availability and price. We also have an ultra lightweight material available for fitted

Technical Sheet: Northrop F-5 Freedom Fighter Page 1

Page 2: Tech Sheet: Northrop F-5 Freedom Fighter · Current Products List (as of 6/23/18) Description Part No. Price CANOPY COVER, single seat model F5-000 $665.00 CANOPY COVER, dual seat

hangar dust covers.

Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.

The Canopy/Nose Cover combines a Canopy Cover and a Nose cover. The Northrop F-5 Freedom Fighter CanopyCover is designed to enclose the windshield, all side windows, canopy roof, and extend forward to cover the nose. It is aone-piece cover. The Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna andtemperature probe placements. The Canopy Cover attaches using adjustable "belly straps", which run under the belly andconnect to the other side of the cover with a quick-release plastic buckle. To ensure the most secure fit, high-quality shockcord is enclosed in the hem of the cover to help keep the cover tighter against the airplane. Canopy Covers are commonlyreferred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.

The Engine Inlet Plugs are custom fit for your Northrop F-5 Freedom Fighter intakes, made with heavy-duty vinyl material,and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed anddried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs areembroidered with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is stillwarm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and EngineBungs.

The Northrop F-5 Freedom Fighter Pitot Tube Covers, made of Naughahyde vinyl, are designed to cover the entire pitotassembly. Slipping on over the tube, the cover tightens around the base with a special Velcro strap detail. A "remove beforeflight" streamer is attached to the cover. Non-burning Pitot Covers are designed to withstand more than 500 °Fahrenheit, and will prevent the pitot cover from melting onto the tube if the pitot heat is accidentally turned on with the pitotcover attached.

The Northrop F-5 Freedom Fighter Lightweight Travel Canopy Cover will cover the same area as our standard CanopyCover, but the material used is very lightwieight and will fold up and store in a much smaller space. This cover is ideal forthe airplane that is hangered full time and only needs a cover on rare occasions.

F5 Canopy Cover (shown on a single seat model) F5 Canopy/Nose Cover (shown on a dual seat)

T-38 Canopy & Canopy/Nose Covers Exhaust Cover

Technical Sheet: Northrop F-5 Freedom Fighter Page 2

Page 3: Tech Sheet: Northrop F-5 Freedom Fighter · Current Products List (as of 6/23/18) Description Part No. Price CANOPY COVER, single seat model F5-000 $665.00 CANOPY COVER, dual seat

Current Products List (as of 7/15/18) Description Part No. Price

CANOPY COVER, single seat model F5-000 $665.00

CANOPY COVER, dual seat model F5-005 $665.00

CANOPY/NOSE COVER, single seat model F5-010 $905.00

CANOPY/NOSE COVER, dual seat model F5-015 $905.00

EXHAUST COVER F5-200 $410.00

EXHAUST PLUGS F5-210 $425.00

INTAKE PLUGS (set of 2) F5-100 $425.00

PITOT COVER F5-300 $95.00

PITOT COVER, heat resistant type F5-301 $170.00

INSTRUMENT TRAINING HOOD F5-400 $970.00

TRAVEL COVER, Light Weight Travel Canopy Cover, single seat model F5-800 $530.00

TRAVEL COVER, Light Weight Travel Canopy Cover, dual seat model F5-805 $530.00

TRAVEL COVER, Light Weight Travel Canopy/Nose Cover, single seat

model F5-810 $725.00

TRAVEL COVER, Light Weight Travel Canopy/Nose Cover, dual seat model F5-815 $725.00

Prices subject to change. Other Covers and Design Alterations: Prices on request.

Prices are FOB Morgan Hill, CA. Sales tax on orders shipped to California addresses. Orders take approximately 3

weeks to complete. For domestic orders we normally ship by UPS ground service. Next day shipping and air parcel

post is available on request. We can take payment by Visa, Mastercard, American Express, or Discover.

Bruce's Custom Covers offers protective covers and plugs for virtually every type of airplane, jet and helicopter. If

you have questions about our products please call any time TOLL FREE: 800/777-6405, or FAX: 408/738-2729.

Technical Sheet: Northrop F-5 Freedom Fighter Page 3

Page 4: Tech Sheet: Northrop F-5 Freedom Fighter · Current Products List (as of 6/23/18) Description Part No. Price CANOPY COVER, single seat model F5-000 $665.00 CANOPY COVER, dual seat

Technical Sheet: Northrop F-5 Freedom Fighter Page 4