Embed Size (px)
Citation preview
Ph : +918086462280 Mob : 9632235361
Website : www.technobelindia.com | Email:[email protected]
Technobel India, #37, Thirumagondanahalli Village ,Neralur Post,
Attibele Hobli, Anekal Thaluk, Hosur Main Road, Bengaluru – 562017. Karnataka.
Industrial Heating Systems And Automation
TECH NOBEL(AN ISO 9001:2015 & CE CERTIFIED COMPANY)
Company Overview
Quality Policy
We have gained CE Certification for Industrial heaters, Thermocouples,
Temperature controllers, oven and furnaces which is the mark of the
quality of our range of products.
Our processes are automated enabling us to manufacture standard products and
maintaining quality across wide range. Our commitment to service & quality control and
efficient manufacturingprocesses is relentless. We deliver trouble-free products to end
users as well as Original Equipment Manufacturers (OEM's) by following internationally
-recognized quality control and process inspection methods.
Experienced technicians and engineers are back born of our industry that enables us to manufacture standard products and maintaining quality across the range.
Technobel India is a leading manufacturers and exporters of Industrial Heaters,
thermocouples, Engineering and Automation products , industrial ovens and
furnaces in Bangalore, India.
Technobel india is ISO 9001-2015 certified company. We have gained CE certification for
Industrial heaters,Thermocouples,oven and furnaces.
Our products are highly appreciated by our customers, as we ensure all quality factors
with highest perfection and latest designs
Our Strength and Features
Website : www.technobelindia.com | Email:[email protected]
Wide Customer Base And Reputed Customers
Consistent Growth
Customer End Service Facility
Technical Support.
Design And Drawing Facility
Fully Equipped Workshop
One Stop Solution For Complete Heating And Control Systems..
Industrial Heaters
The heat from radiant heaters is emitted as soon as the rays
hit a surface and there are no losses on the way. The heat is
then transmitted to the air which means that the temperature
can be lowered with a maintained comfort level. Radiant
heaters also give instant heat.
Radiant Tube Heaters
Teflon Heaters
Glass Tube Heaters Cast In Heaters
High Density Heaters
Immersion Heaters
These Heaters are user specific and designed in various
shapes and size. Major factor for designing these type of
heaters is watt density required for heating medium.
ApplicationsWater, oil, chemical, paint, highly corrosive liquids, electro plating etc.
We have a range of high quality Teflon, Vat and PTFE heaters that we design to your specification. They are designed to service a wide range of industries, the designs available include a ridged or flexible Teflon, Vat and PTFE heatersmanufactured specifically for the metal finishing & chemical industries. We take pride in all of our heaters and we believe that these Teflon, Vat and PTFE heaters are perfect for metal finishing & chemical industries.
Technobel High density heaters are designed for sheath
temperature up to1000 deg. These heaters provide watt
density up to 50 Watts/cm2. .For construction of cartridge
heaters, nickel chromium 80:20 resistance wire is coiled
on ceramic core and space between sheath and wire is filed
with MgO powder
A tubular quartz infrared lamp is double side by tungsten coat
quartz lamp light source with high power supply startup. The light
source is a tungsten halogen lamp series. The light source can
prevent darkened bulb, and prevent the use of infrared in the
recession. Benefits in industrial application is efficient, responsive
for power control, compact and light. According to different types,
light position can level or any position
Technobel cast in heaters are available in various designs
with outer body cast with cast iron, aluminum, and brass
and bronze. Cast in heaters can be made as required for
customer’s choice.
Ceramic Band Heaters
Technobel Ceramic band heater made up of nickel chrome
wire precisely wounded inside ceramic band. These heaters
are highly useful up to 500 deg. These heaters termination
and size can be varied as per customer’s requirement.
Hot Runner Coil Heaters
Hot runner Coil Heaters are manufactured in two standard diameters, 1.5 mm and 1.8mm. These heaters are swagedand compacted to these diameters. Technobel manufactures high quality hot runner coil heaters and assure the best with respect to safety and performance. It has possibility to reach high working temperatures in small spaces. Technobel Micro Tubular heaters can be manufactured with different lengths, power and sections, for any small dimension nozzle.
Technobel Mica band heaters are made up of nickel chrome
material attached to mica band or sheet. These types of
heaters are useful up to low temperature and high energy
saving applications. Our latest technology ensures mica band
heaters are made uniform heating in all around heated
medium with specified ampere rate.
Mica Band Heaters
Technobel Titanium tube heaters are manufactured for
chemical heating such as nickel, chromium, sulphuric acid,
chlorides and various organic solutions. Major applications
of these heaters are electroplating and alkaline/acidic
chemical warming.
Titanium Tube Heaters
Ceramic Bobin Heaters
Ceramic bobbin heater in Silica glass & SS container is used for
corrosive liquid Construction : Manufactured out of imported fused
Silica/Glass tube with replaceable refractory type heaters, with a
heat resistant rubber cap and a connecting connecting cable. In
SS container we use SS 304, SS 316, SS316L and 99.9% pure lead
coating on SS tube for highly corrosive liquid. Application : Highest
running temperature in all acids except hydro fluoric and phosphoric
acids. Also used for heating in Ferric chloride etching baths,
anodizing bright dip baths etc.
Strip Heaters
Strip Heaters are made up of wounded resistance coil through set
of ceramic insulators. Resistance coil is mechanically connected to
screw terminals or lead wires for positive connection. The element
assembly is electrically insulated and covered by metal sheathing.
Maximum sheath temperature of strip heaters is up to 600 deg.
Industrial Heaters
Industrial Ovens
Technobel builds industrial ovens in a variety of shapes and sizes to
meet your heating requirements. These configurations consist of
laboratory, warming, batch, walk-in, bell, pit, top-loading, and conveyor
ovens. Their industrial applications include but are not limited to the
following: aging, annealing, baking, bending curing, drying, enameling,
firing, hardening, heating, soldering, stress-relieving, sterilizing and
tempering. Maximum temperature ranges from 400° to 1400°F.
Technobel industrial oven construction normally follows three basic heat
transfer methods: direct radiation, gravity convection, and air re-circulation.
Temperature Sensors and Controllers
A temperature sensor is a device, usually an RTD (resistance temperature detector) or a thermocouple,
that collects temperature from a particular source and converts into digital form to a device or an observer.
Temperature sensors are used to measure temperature in circuits which control a variety of equipment's.
This temperature sensor type consists of two wires of
different metals connected at two points. There are
many types of thermocouples, each with its own unique
characteristics in terms of temperature range,
durability, vibration resistance, chemical resistance,
and application compatibility. Type J, K, T, & E are
“Base Metal” thermocouples are the most common types
of thermocouples.Type R, S, and B thermocouples
a r e “ N o b l e M e t a l ” t h e r m o c o u p l e s .
· Hand AC system environmental controls·F ood processing units·M edical devices·C hemical handling and automotive under the hood monitoring and controlling systems
Applications
Radiant Heat industrial ovens provide the least expensive method for
applications where temperature uniformity is not a consideration and
provide direct radiation of the heat from exposed heating elements.
Gravity Convection industrial ovens create more uniform temperatures due to the placement of the heating elements
behind baffles to heat the natural air flowing within the chamber, creating a chimney effect. With gravity convection,
air flows from top to bottom. It is a satisfactory method when your product must be shielded from radiant heat and
temperature control is not a critical factor.
Website : www.technobelindia.com | Email:[email protected]
Industrial Conveyor Oven
Despatch Conveyor Ovens are designed for process versatility and reliability. They achieve superior air temperature
uniformity on all interior parts due to high-volume, vertical down airflow. The continuous belt design is ideal for large
quantities of similar work pieces being processed. Typical applications include pre-heating, curing, bonding, drying and
heat treating.
Thermoforming Oven
Heating Oven For High Solids Materials Like Corian, Hi-macs,
Staron, Kerrock, Betacryl Etc
Ideal Solutions For Manufactures Who Need Additional Oven
For Their Bending And Thermoforming Presses Or If Their
Oven Is Broken But Vacuum Press Still Operational Each
1000x1000mm Section Is Heated Separately With Their Own
Dedicated Temperature sensor. So for example 2000x1000mm
with TOP/BOTTOM heating sections has 4no 1000x1000mm
heated plates with 4no heating controls. This is to ensure even
spread of heat when for example fresh corian piece is inserted
into oven and can lower for first minute heat readings. Sturdy
Construction On Castors So When Not In Use Can Be Stored
Without Taking Space In Workshops. Top/bottom Heating Has
An Air Assisted Lid Which Opens By Pressing A Button Single
Heating Plate Manual Opening
Industrial Furnace
Salt Bath Furnace
Tempering Furnaces
Duct Heaters Ands Air Dryers
Process air duct heaters are used for tempering forced air
in many industrial processes. Heater wattage is dependent
on air outlet temperature (up to 1200°F [650°C]) and air
velocity. Smaller duct heaters can be tandem mounted in
place of one large unit to meet space limitations and
simplify installation.
Technobel heat treating industrial furnaces are carefully engineered, refined and tested to meet today's exacting
requirements. Our standard furnace designs, whether box, pit, or bell-type, with or without forced air circulation,
can be modified to fit your needs.
The three basic batch type industrial furnaces are:
BOX - used in the metal trades for hardening and annealing, the ceramic industry for firing, the glass industry for
annealing and by chemical producers for processing. AIR CIRCULATION - used much like the box type, but having
the added feature of air recirculation to produce better heat uniformity in the working chamber.
SALT BATH - for carburizing, hardening and tempering.
Aluminium Melting Furnace
we are a leading manufacturers of Aluminium Melting Furnace.
Fabricated by our expert team according to guidelines of the industry,
these furnaces have outstanding quality and high durability. In addition
to this, these are widely demanded by our customers for their easy
operation and efficient working.
Features:Low maintenanceLong service lifeRobustness
Specifications:capacity to melt upto 3 tonspower depend upon melting capacities
Salt-bath furnaces offer remarkably high temperature uniformity and excellent
heat transfer to the work piece. Our salt-bath furnaces are especially useful for
heat-treating of metals in neutral or active salt baths. Processes such as
carbonitriding (e.g. Tenifer) up to 600 °C, carburizing up to 950 °C, or bright
annealing up to 1000 °C can be realized. In their standard version these salt-bath
furnaces are equipped with safety technology for heat treatment of steel. As
additional feature can be equipped with extended safety technology for heat
treatment of light metals.
Technobel offers Tempering furnaces for both low and high tempering
processes. These tempering furnaces provide a reliable platform for
acquiring various mechanical properties during tempering and reduce
the residual stresses during the stress relieving process. Pit Type, In-out
Box Type and the Double Door Straight through Box Type are the
various options that we offer in Tempering Furnaces.
Technobel has its own team of Engineers, fabricators and electricians. We are capable of undertaking various industrial
engineering, procurement and construction projects. Our scope of supply is all metal fabrication including SS works, pipe
line projects, Vessel construction, Electrical automation, Industrial conveyor ETC. We can offer contracts that are structured
to help our clients manage financial and other risks associated with projects. Work can be performed on a fixed price,
lump sum, cost plus, and a variety of other risk sharing methods.
EPC Projects
Our Clients
LOCATE US
Industrial Heating Systems And Automation
TECH NOBEL
Ph : +918086462280 Mob : 9632235361
Website : www.technobelindia.com | Email:[email protected]
Technobel India, #37, Thirumagondanahalli Village ,Neralur Post,
Attibele Hobli, Anekal Thaluk, Hosur Main Road, Bengaluru – 562017. Karnataka.
