TDE MACNO SPAAC&DC DRIVES, SERVOS AND

DRIVE SYSTEMAFE, FFE CONVERTERS & STORAGE

SYSTEMS FOR RENEWABLE ENERGIES

AUTOMATION AND CONTROL SYSTEMS

Experience, Expertise, PerformanceThe Innovative technology

in the Motion Control

OPENDRIVE EXP

MINIOPENDRIVE EXP

COMPLETE DRIVEAUTOMATION SOLUTION

FROM 0,4KW TO 2 MW

OPD EXP is extremely flexible with 6 modes of operation:• Open loop V/Hz vector AC drive• Close loop vector AC Drive (FOC)• AC servo for rotative, linear and torque motors• Regenerative (Active) power supply(Active Front End & Fundamental Front End)

• Chopper mode to control DC motors• Reluctance motor controlNew generation 32 bit floating point DSP (Texas TMSF28335, 150Mips)PLC on board programmable according to IEC 61131-3

OPD EXPLORER configuration tool for drive programming

Safe Torque Off (STO) function according to EN-ISO 61800-5-2 (SIL=2) EN-ISO 13849-1 ( Performance Level=d ) Certificate of conformity by TUV (only in OPD EXP)

SIZES

FROM 315KW UP TO 2MW

Input mainand LCL filter

AFE:2 Stack

Chopper brakeFor emergency

Inverter:2 Stack

DS A/R/V series for HVACR & spindle up to 2000Hz frequency output from 0,25kW to 250 kW

• Thyristor power unit• Wide power supply range (up to

400Vac) • Analog and/or digital speed

reference• Keypad and display for monitoring,

parameters setting and localdiagnostic

• RS485 serial line • PROFIBUS DP communication

protocol• HW / SW customized solutions• Range 30A - 2500 A

• x86 PROCESSOR 800MHz, 256MB RAM, 2GB FLASH• Ethernet port for the connection with a supervision

system or via company network for remote support• Standard USB Host port for data reading/saving• 2GB D.O.M. for kernel and operating program• Back up battery for data/time and BIOS setup

management • RS232 serial port for system monitor or peripheral devices• Half/full duplex RS485/RS422 serial port for the connection with remote PCs• Canbus port for fieldbus connection with all TDEMACNO drives families• Nr. 16 configurable AI to read the thermocouples or 0-10V general inputs• Nr. 4 generic 0-10V AI (for ex. positioning potentiometers) • Nr. 1 current generator for PT100 for generic use like reading of

the oil temperature • Nr. 8 0-10V or +-10V AO for generic use • Nr.24 optoinsulated 24Vdc DI • Nr.24 optoinsulated 24Vdc 2A DO shortcircuit, overvoltage

and inverted polarity protection

Modular cardsICUsI/O boards, carrier modulesIntegrated debug features

TpWire modular busSingle wireProgrammable, can beCustomized to be other buses

Standard SoftwareStandard OS and TOSsStandard applications blocks, Standard interface

Main characteristics:

• Customized OPD version to control servomotor

• Minimum indexing times• Bidirectional rotation

OPDE for the control of electromechanicalturrets series with horizontal axis. Thanksto OPDE technology, extremely reducedtimes and shockless positioning are performed.

• Project optimization• Enhanced

performance• Enhanced reliability • Cost optimized

WATER, WIND, SOLAR & STORAGE SYSTEM

TDEMACNO offers the power components:

- AFE (Active Front End drive)- Soft start resistors- EMC filters- LCL clean power filters for THD < 3%- INVERTER- Inductance (generator side)

Bi-Directional BatteryCharger / Inverter

• DISTRIBUTED SOURCES ON GRID

• DIFFERENT ENERGY OPTIMIZATION

• ISLAND GRIDS

Energy produced by a photovoltaic system, if not immediatelyused, is automatically fed to the electricity grid, at the pricedecided by the grid operator. A better way to save energycosts is to store the energy in excess into a battery energystorage and use it whenever we need.

E-Store Energy Systems give the opportunity to power homesand businnesses at lower costs, with respect for the environment.Moreover they can provide energy even in remote applicationsthanks to the Island functions (MicroGrid), with Ac voltage andfrequency completely settable by the user.

Power from:10kW - 2MWEnergy from:15kWh-2MWh

TDEMACNO developed a customised solution for controlling

reluctance, brushless and asynchronous motors in Automotive

application.

MAIN CHARACTERISTICS• Torque control• Speed control (Sport, Economy, Reverse Gear modalities, with specific parameters)• Acceleration and brake control• Gear control (4 positions)

• Parking modality• Torque limit for the automotive• Max current management• Battery protection• CUSTOMISED CAN BUS

MAIN CHARACTERISTICS:

• OPDE 150A (75Kw)• Overload 70% (120kW)• Brushless/Reluctance/

Asynchronous motor with feedback from resolver

• Battery power supply 350Vdc• Water cooling• Max speed: 110 km/h• Autonomy: 120 km