Embed Size (px)
DESCRIPTION
Harmonic Solutions TCI offers a number of solutions that reduce or eliminate harmonic distortion, including line reactors, passive harmonic filters, and active harmonic filters. With proper application, these harmonic filters are used to meet the IEEE-519 specification on harmonics.
Citation preview
HarmonicGuard® Active (HGA) Filter• Save money and space: a single bus-applied HGA
can correct harmonics for multiple loads
• Reduce current harmonic distortion to less than 5% allowing you to meet IEEE-519 specifications
• Lower your energy bills by improving the power factor and overall efficiency of your system
• Easily monitor performance & remotely control the HGA with one of our communications options
Am
ps
Time (ms)
0
100
-300
-200
-100
300
200
0 403530252015105
Without HGP
Am
ps
Time (ms)
0
100
-300
-200
-100
300
200
0 403530252015105
With HGP
KDR/KLR Line Reactor• Extend your drive uptime by reducing the likelihood of the drive tripping
• Protect other equipment on the same bus from operational issues caused by voltage distortion
• Reduce overheating issues due to harmonic currents
HarmonicGuard® Passive (HGP) Filter• Limit current harmonic distortion to less than 5%
with background voltage distortion as high as 5%
• Meet IEEE-519 specifications and improve power factor & overall efficiency of your system
• Lower your energy bills by reducing harmonic current losses
• Save time: detect and repair blown fuses faster with the Fuse Monitor
Time (ms)With HGA0 403530252015105
0
100
-300
-200
-100
300
200
Am
ps
Time (ms)
0
100
-300
-200
-100
300
200
0 403530252015105
Am
ps
Without HGA Injection Current
Harmonic SolutionsHarmonicGuard® Solution Center• TCI’s expertise in an easy-to-use online sizing tool
• Apply multiple technologies to compare their impact on your system THD & power factor
• Determine IEEE-519 compliance
W132 N10611 Grant DriveGermantown, WI 53022USA
Toll Free: 800-824-8282P: 414-357-4480F: 414-357-4484
TCI, LLCwww.transcoil.com
®
V1k dv/dt Output Filter(for cable leads up to approximately 1,500 ft.)• Extend the life of your motor and cable by
reduction of harmful voltage spikes due to dv/dt
• Protect cable runs and reduce motor heating, noise and vibration
• Prevent motor failure with protection against motor insulation breakdown
MotorGuardTM Sinewave Output Filter(for cable leads up to approximately 15,000 ft.)• Greatly extend the life of your motor and cable
runs through reduction of motor noise, vibration and heat
• Increase productivity and reduce operating costs
• Universal acceptance covers a wide range of applications
0 403530252015105
Vo
lts
Time (ms)
1500
1000
500
0
-500
-1000
-1500
With MotorGuard or MotorShield
0 403530252015105
1500
1000
500
0
-500
-1000
-1500
Time (ms)
Without MotorGuard or MotorShield
Vo
lts
KRF EMC Filter• Filter EMI/RFI noise caused by power switching devices
• Prevent interference between automated lighting circuits, security cameras, and other critical electronics on your system
High Frequency Noise Solutions
®
W132 N10611 Grant DriveGermantown, WI 53022USA
Toll Free: 800-824-8282P: 414-357-4480F: 414-357-4484
Part Number: 27865Version 1.4© Copyright 2015
TCI, LLCwww.transcoil.com
MotorShieldTM Sinewave Output Filter(for cable leads up to approximately 15,000 ft.)• Protect your motor and cable runs by reduction
of motor noise, vibration and heat to improve system performance
• Resistor-less design is an ideal solution for fan and pump applications
Motor Protection Solutions
With V1k
1500
1000
-1500
-1000
-500
0
500
0 5 10 15 20 25 30 35
Volt
s
Time (ms) 500 feet
1500
1000
-1500
-1000
-500
0
500
Volt
s
0 3530252015105
Time (ms) 500 feetWithout V1k
