DANGER - LE LIT doivent rester fixé au mur pour les étapes 1 à 5 - DANGER

TIP OVER HAZARD

Step 6

HELP LINE 1.800.667.6336

#3

# 2

# 1

Step 3

• Desserrer le boulon droit situé dans la position n ° 3.• Retirez le boulon dans la position n ° 2.• Répéter sur le côté gauche.

Step 5

Sit on the ground andbase your foot against the

front edge of the side panel.Use a PVC tube and pullthe arm towards you to free the silver blockingbracket. Ease the arm

back slowly.

DANGER: Beware of the strong tension on

the springs.

Step 4

Carefully tilt and slidethe front panel upwards

respectingthe locked angle.This step requires

2 people.

The door is very heavy, do not put your feet

under to support

Step 2

Étape 1

Avoir une deuxième personne de tenir le panneau avant en place

Faciliter le panneau vers le haut et faire pivoter le support d'argent sur l'écrou supérieur sur le mécanisme pour empêcher la porte de se fermer.

Ouvrez le lit et retirer le matelas

Instruct ions for Disassembl ing the Murphy Bed

Démonter le lit casement.First retirer de la paroi en dévissant les pièces jointes sécurisées.

Placez la face du battant sur le sol à démonter.

Remarque: Laissez le mécanisme sur les panneaux latéraux

Have a 2nd person hold the front panel in place.

Step 1

Step 4

Step 5

Step 3

Step 2

Step 6

DANGER - THE BED MUST STAY SECURED TO THE WALL FOR STEPS 1 TO 5 - DANGER

Open the bed and remove the mattress

Carefully tilt and slide the front panel upwards respecting the locked angle.

This step requires2 people.

Sit on the ground and place your foot against the front edge of the side panel. Use a PVC tube and pull the arm towards you to free the silver blocking bracket. Slowly ease the arm back.

Ease the panel up and rotate the silver bracket using a pencil or screw driver over the top nut on the mechanism to prevent the door from closing.

Carefully unscrew the screws holding the “L” Bracket that hold the bed cabinet to the wall. Place the casement face down on the fl oor to disassemble.

Note: Leave the mechanism on the side panels

• Loosen the nut on the bolt located in the #3 position.

• Remove the nut and the bolt in the #2 position.

• Leave the bolt and nut in the #1 position as is.

• Repeat on the other side.

#3

# 2

# 1

The door is very heavy, do not put your feet under to support.

I n s t r u c t i o n s f o r D i s a s s e m b l i n g t h e M u r p h y B e d

You can be killed or seriouslyinjured if you don’t follow these instructions

Be sure that the Arm Lock is secured against the

hexagon nut. DO NOT use your fi nger.

DANGER: Beware of the strong tension on the springs.

HELP LINE 1.800.667.6336