One set required per drawer

15 Subject to technical modifications without notice. © 2006

TANDEM 552H partial extension drawer runners

Overlay application Description Basic components

- Partial extension concealed drawer runners - For 16 (5/8") max. drawer side thickness- Zinc coated steel profiles- Concealed roller carriages with permanently lubricated synthetic rollers create a smooth running action- Locking devices enable easy drawer insertion and removal- Force guided right side and ±1.5 (1/16") tolerance compensating left side- Dynamic weight capacity of 75 lb- Static weight capacity of 100 lb

Using TANDEM page 13

Other applications

Components

Profile set

For overall cabinet depth

Drawer length

Extensionloss TANDEM

305 (12") 229 (9") 37 (1-7/16") 552H2290N*381 (15") 305 (12") 78 (3-1/16") 552H3050N457 (18") 381 (15") 98 (3-7/8") 552H3810N533 (21") 457 (18") 97 (3-13/16") 552H4570N610 (24") 533 (21") 119 (4-11/16") 552H5330N

Runner profile

Locking device

Rear mounting bracketsfor face frame only

Rear mounting bracket for frame cabinets

Dimensions in millimeters (inch equivalents as noted)

612TH295.3750Non-handed bracket

Installation screws

Note: These runners are for 16 (5/8") max. drawer side thickness

Drawer preparation page 14

- One right and one left required per drawer- Minimum interior drawer width 121 (4-3/4")- Height adjustable +3 (1/8")

Standard locking device

T51.1700.04 LT51.1700.04 R

LeftRight

612THInstallation screwspage 14Installation

Accessories page 45 Assembly aids page 47

* 7/8 extension

For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation.

- Two required per drawer- Depth and side-to-side self-alignment- Zinc-plated steel

pg. 29Narrow drawerpg. 27 pg. 31 pg. 32Bottom mountRoll-out trayInset drawer

www.cabinetparts.com

25 (31/32")

37 (1-7/16")

33 (1-5/16”)

6 (1/4”)

9 (11/32”) typ.

Min. topclearance

6 (1/4") Inside cabinet width

Drawer width

Ope

ning

13 (1/2”) Drawer bottom recess

Drawer side thicknessmaximum 16 (5/8”)

14 (9/16”)Bottom clearance

System or #7 profilemountingscrews

37

(1-7

/16"

)

21 (13/16")

Drawer height maximum =

opening minus 20 (13/16”)

page 45

10 (3/8")

37 (1-7/16")

4 (5/32") Setback

Profile length

A

B

Inside cabinet depth

9.5 (3/8")

9 (11/32") typ.

295.3750

Rearmountingbracket

2032

(1-1

/4")

(13/

16")

14 (9/16")

Face frame rail

Face

fram

e st

ile

12(15/32")

7 (9/32")

11 (7/16”)

Ø6 x 10 bore for hook

21 (13/16") minimum rear notch

Subject to technical modifications without notice. © 2006 16

Drawer and cabinet specifications

Front view

Profile close-up

Profile mounting specifications

TANDEM Drawer lengthInside cabinet depth with bracket

Profile lengthSystem screw locations

Maximum Minimum A B

552H2290N 229 (9") 293 (11-9/16") 250 (9-7/8") 241 (9-1/2") 133 (5-1/2") 229 (9")

552H3050N 305 (12") 369 (14-9/16") 326 (12-7/8") 317 (12-1/2") 165 (6-1/2") 261 (10-1/4")

552H3810N 381 (15") 446 (17-9/16") 403 (15-7/8") 394 (15-1/2") 165 (6-1/2") 357 (14-1/16")

552H4570N 457 (18") 522 (20-9/16") 479 (18-7/8") 470 (18-1/2") 261 (10-1/4") 453 (17-13/16")

552H5330N 533 (21") 598 (23-9/16") 555 (21-7/8") 546 (21-1/2") 261 (10-1/4") 517 (20-3/8")

Rear mounting bracket

Drawer back preparation

Dimensions in millimeters (inch equivalents as noted)

Example: For 21" inside cabinet width and a 5/8" thick drawer, 21" minus 3/8" = 20-5/8" drawer width

Note: For frame applications. Minimum 3 screws per bracket.

Formula for calculating outside drawer width

For drawer side thickness 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32")

Deduct from inside cabinet width 10 (3/8") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32")

Extension Partial

Max. drawer material 16 (5/8")

Dynamic capacity 75 lb.

Static capacity 100 lb.

www.cabinetparts.com

17 Subject to technical modifications without notice. © 2006

TANDEM 552F partial extension drawer runners

Description Basic components

- Partial extension concealed drawer runners - For 19 (3/4") max. drawer side thickness- Zinc coated steel profiles- Concealed roller carriages with permanently lubricated synthetic rollers create a smooth running action- Locking devices enable easy drawer insertion and removal- Force guided right side and ±1.5 (1/16") tolerance compensating left side- Dynamic weight capacity of 75 lb- Static weight capacity of 100 lb

Components

Runner profile

Locking device

Rear mounting bracketfor face frame only

For overall cabinet depth

Drawer length

Extensionloss TANDEM

305 (12") 229 (9") 37 (1-7/16") 552F2290N*381 (15") 305 (12") 78 (3-1/16") 552F3050N457 (18") 381 (15") 98 (3-7/8") 552F3810N533 (21") 457 (18") 97 (3-13/16") 552F4570N610 (24") 533 (21") 119 (4-11/16") 552F5330N

Dimensions in millimeters (inch equivalents as noted)

Other applications

Profile set

Note: These runners are for 19 (3/4") max. drawer side thicknessOne set required per drawer

Overlay application

Rear mounting bracket for frame cabinets

612TH295.3750Non-handed bracket

Installation screws

- One right and one left required per drawer- Minimum interior drawer width 121 (4-3/4")- Height adjustable +3 (1/8")

Standard locking device

T51.1700.04 LT51.1700.04 R

LeftRight

612THInstallation screwspage 14Installation

* 7/8 extension

For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation.

Using TANDEM page 13 Drawer preparation page 14

- Two required per drawer- Depth and side-to-side self-alignment- Zinc-plated steel

pg. 29Narrow drawer pg. 31pg. 27 pg. 32Bottom mountRoll-out trayInset drawer

Accessories page 45 Assembly aids page 47

www.cabinetparts.com

25 (31/32")

37 (1-7/16")

33 (1-5/16”)

6 (1/4”)

9 (11/32”) typ.10 (3/8")

37 (1-7/16")

4 (5/32") Setback

Profile length

A

B

Inside cabinet depth

9.5 (3/8")

9 (11/32") typ.

295.3750

Rearmountingbracket

Min. topclearance

6 (1/4") Inside cabinet width

Drawer width

Ope

ning

13 (1/2”) Bottom recess

Drawer side thicknessmaximum 19 (3/4”)

14 (9/16”)Bottom clearance

37

(1-7

/16"

)

24.5 (15/16”)

Drawer height maximum =

opening minus 20 (13/16”)

System or #7 profilemountingscrews

page 45

7 (9/32")

11 (7/16”)

Ø6 x 10 bore for hook

21 (13/16") minimum rear notch

2032

(1-1

/4")

(13/

16")

14 (9/16")

Face frame rail

Face

fram

e st

ile

12(15/32")

Subject to technical modifications without notice. © 2006 18

Drawer and cabinet specifications

Profile close-up

TANDEM Drawer lengthInside cabinet depth with bracket

Profile lengthSystem screw locations

Maximum Minimum A B

552F2290N 229 (9") 293 (11-9/16") 250 (9-7/8") 241 (9-1/2") 133 (5-1/2") 229 (9")

552F3050N 305 (12") 369 (14-9/16") 326 (12-7/8") 317 (12-1/2") 165 (6-1/2") 261 (10-1/4")

552F3810N 381 (15") 446 (17-9/16") 403 (15-7/8") 394 (15-1/2") 165 (6-1/2") 357 (14-1/16")

552F4570N 457 (18") 522 (20-9/16") 479 (18-7/8") 470 (18-1/2") 261 (10-1/4") 453 (17-13/16")

552F5330N 533 (21") 598 (23-9/16") 555 (21-7/8") 546 (21-1/2") 261 (10-1/4") 517 (20-3/8")

Dimensions in millimeters (inch equivalents as noted)

Rear mounting bracket

Front view

Profile mounting specifications

Example: For 21" inside cabinet width and a 3/4" thick drawer, 21" minus 7/16" = 20-9/16" drawer width

Drawer back preparation

Note: For frame applications. Minimum 3 screws per bracket.

Formula for calculating outside drawer width

For drawer side thickness 19 (3/4") 18 (23/32") 17 (21/32")

Deduct from inside cabinet width 11 (7/16") 13 (1/2") 14 (9/16")

Extension Partial

Max. drawer material 19 (3/4")

Dynamic capacity 75 lb.

Static capacity 100 lb.

www.cabinetparts.com