1/7

TANAGER SHOP LUMINAIRE INSTALLATION GUIDE

INSIDE THE BOX:

WARNING

• Turn power off before inspection, installation or removal.

• Properly ground electrical enclosure.

• Luminaire may fall down if not installed properly.

• Avoid direct eye exposure to the light source while it is on.

• For indoor use only.

• Dry location only.

• Do not operate luminaire with damaged parts.

• To prevent wiring damage or abrasion, do not expose wiring

to edges of sheet metal or other sharp objects.

• The light source of this luminaire is not replaceable, when

the light source reaches its end of life the whole

luminaire shall be replaced.

• The manufacturer shall not be liable for any damage

resulting from inappropriate modifications to the

luminaire or faulty installation.

• • If you have any questions, contact the manufacturer.

Surface mounting Cable mounting

NEEDED FOR MOUNTING:

www.baltled.com6 March, 2018

© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.

Track mounting

L, mm W, mm H, mm

310 / 560 / 1060 / 1560 145.5 81 / 138* /131.5**

* With track mounting option** With cable mounting

2/7

FULMAR H 120MOUNTING ON SURFACE

1 2

4

5 6 SCREWING

7 8

TANAGER INDUSTRIAL LUMINAIRE INSTALLATION GUIDE

www.baltled.com6 March, 2018

© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.

3/7

FULMAR H 120MOUNTING ON SURFACE

9 10

TANAGER INDUSTRIAL LUMINAIRE INSTALLATION GUIDE

1211

1413

13

www.baltled.com6 March, 2018

© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.

4/7

FULMAR H 120CABLE MOUNTING

1 2

4

5

7 8

TANAGER INDUSTRIAL LUMINAIRE INSTALLATION GUIDE

6

www.baltled.com6 March, 2018

© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.

5/7

FULMAR H 120CABLE MOUNTING

9 10

TANAGER INDUSTRIAL LUMINAIRE INSTALLATION GUIDE

1211

13

www.baltled.com6 March, 2018

© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.

6/7

FULMAR H 120TRACK MOUNTING

1 2

TANAGER INDUSTRIAL LUMINAIRE INSTALLATION GUIDE

43

5

www.baltled.com6 March, 2018

© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.

7/7

FULMAR H 120RECOMMENDATIONS FOR MOUNTING*

TANAGER INDUSTRIAL LUMINAIRE INSTALLATION GUIDE

1 2 3

4 5 6

1 1.5 2 3 5

2.5 3 4 4 5 6

3 3 3 4 5 6

4 3 3 3 4 5

5 2 3 3 3 4

6 3 3 3 3 3

H, m

B, m

B

H

B/H POSITION

<0.18 1

0.19 – 0.24 2

0.25 – 0.59 3

0.6 – 0.85 4

0.86 – 1.25 5

> 1.26 6

* An example for Tanager with Milky Cover + UGR shades.

www.baltled.com6 March, 2018

© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.