-
7/31/2019 TAMN 100 - Course Introduction
1/17
10/25/2012 Shop Tools and Techniques 1
Shop Tools and Techniques
TAMN 100
CourseIntroduction
-
7/31/2019 TAMN 100 - Course Introduction
2/17
10/25/2012 Shop Tools and Techniques 2
TAMN 100
INSTRUCTOR: Michael Bush
OFFICE LOCATION: T-164A
OFFICE PHONE: 313-845-6412
E-MAIL ADDRESS: [email protected]
-
7/31/2019 TAMN 100 - Course Introduction
3/17
10/25/2012 Shop Tools and Techniques 3
TAMN 100
COURSE DESCRIPTION:
This course introduces the basic tools and safety andtechnical
information required by the skilled trades.Topics covered include
non-precision and precisionmeasurement tools and methods, layout
tools and
techniques, hand and bench tools, drills and drillingmachines,
principles of metal cutting and metal cuttingsaws, and pedestal
grinders. Manufacturing processesare discussed.
-
7/31/2019 TAMN 100 - Course Introduction
4/17
10/25/2012 Shop Tools and Techniques 4
TAMN 100
COURSE GOALS:
1. To provide the knowledge and skills to become familiar
with basic industrial tool operating practices andprinciples.2.
To provide a foundation of skills and understandings of
fundamentals, procedures, and principles relative toshop tools
and techniques used in the industrial
environment.3. Develop critical thinking and problem solving
skills inidentifying specific applications of shop tools relating
touse on the job floor.
-
7/31/2019 TAMN 100 - Course Introduction
5/17
10/25/2012 Shop Tools and Techniques 5
TAMN 100
MEASURABLE COURSE OBJECTIVES:
Upon successful completion of this course,
students should be able to:
1. Explain the type, use, and applications of the commonbasic
measuring tools.
2. Explain the type, use, and applications of precisionmeasuring
tools.
3. Select, demonstrate, and utilize the basic layout toolsand
techniques.
-
7/31/2019 TAMN 100 - Course Introduction
6/17
10/25/2012 Shop Tools and Techniques 6
TAMN 100
4. Demonstrate and utilize precision layout tools
andtechniques.
5. Explain the concept of metal cutting.
6. Explain the use of metal cutting saws, accessories,
andtechniques.
MEASURABLE COURSE OBJECTIVES:
Upon successful completion of this course,
students should be able to:
-
7/31/2019 TAMN 100 - Course Introduction
7/17
10/25/2012 Shop Tools and Techniques 7
TAMN 100
7. Demonstrate, and utilize metal cutting saws,accessories, and
techniques.
8. Explain the use of drills, drilling machines, drilling
accessories, and techniques.
9. Demonstrate, and utilize drills, drilling machines,
drilling
accessories, andtechniques.
MEASURABLE COURSE OBJECTIVES:
Upon successful completion of this course,
students should be able to:
-
7/31/2019 TAMN 100 - Course Introduction
8/17
10/25/2012 Shop Tools and Techniques 8
TAMN 100
REQUIRED TEXTBOOKS:
Technology Of Machine Tools, Sixth Edition; Krar, Gill, and
Smid; 2004; McGraw-Hill; ISBN 0-07-830722-8
Shop Tools and Techniques, Version 4.0; Bush; 1999; J &
A Enterprises
-
7/31/2019 TAMN 100 - Course Introduction
9/17
10/25/2012 Shop Tools and Techniques 9
TAMN 100
REQUIRED SUPPLIES:
Hand-held Calculator, Pencils, Paper
-
7/31/2019 TAMN 100 - Course Introduction
10/17
10/25/2012 Shop Tools and Techniques 10
TAMN 100
GENERAL COURSE REQUIREMENTS:
Calculator Use: Students are encouraged to bring acalculator to
all class sessions. Any scientific calculatorwith a fraction button
and a degrees/minutes/secondsbutton will be sufficient for this
course.
-
7/31/2019 TAMN 100 - Course Introduction
11/17
10/25/2012 Shop Tools and Techniques 11
TAMN 100
COURSE ASSESSMENT:
QUIZZES:
Best 6 of 7 accounts for 30% of semester grade. Thismeans the
lowest of 7 quizzes will be dropped. Therewill be no make-ups on
missed quizzes. The first quizmissed will be dropped. Any
additional missed quizzeswill be recorded as a 0 or zero. All
quizzes will be
administered with closed books and no notes allowedand only
during regularly scheduled class periods.
ALL QUIZZES WILL COVER THE TWO PREVIOUS SESSIONS
-
7/31/2019 TAMN 100 - Course Introduction
12/17
10/25/2012 Shop Tools and Techniques 12
TAMN 100
COMPETENCIES:
Completed assigned competencies account for 70% ofsemester
grade. Each individual competency will beequal to 1/14th of this
grade. Incomplete competencieswill be recorded as zero.
-
7/31/2019 TAMN 100 - Course Introduction
13/17
10/25/2012 Shop Tools and Techniques 13
TAMN 100
GRADING SCALE:
100 - 95% = A94 - 85% = B
84 - 75% = C
74 - 70% = D
69% - below = E
-
7/31/2019 TAMN 100 - Course Introduction
14/17
10/25/2012 Shop Tools and Techniques 14
TAMN 100
ATTENDANCE POLICY:
No excused absences. Maximum allowable number is
three (3). The fourth (4th) absence means automaticfailure but
the class can still be attended.
TARDINESS/LEAVING EARLY:
Tardiness and/or leaving early added up to 60 minuteswill be
counted as an absence.
-
7/31/2019 TAMN 100 - Course Introduction
15/17
10/25/2012 Shop Tools and Techniques 15
TAMN 100
CLASSROOM RULES OF CONDUCT & POLICY:
Attire:
Clothing appropriate for the classroom is requested.
Cheating and Plagiarism:
Refer to the current HFCC Catalog
-
7/31/2019 TAMN 100 - Course Introduction
16/17
10/25/2012 Shop Tools and Techniques 16
TAMN 100
Cell Phone Usage:
The use of cell phones or any electronic devices withvideo or
photographic capture and/or transfercapabilities is not permitted
in the classroom duringscheduled class times.
-
7/31/2019 TAMN 100 - Course Introduction
17/17
10/25/2012 Shop Tools and Techniques 17
TAMN 100
Any
Questions???
