TAMA - World of FINAL FANTASY · PDF fileTAMA CROWN TAMA’s CROWN Start with a square coloured side up. 1 2 3 Fold and unfold the outer edges to the middle. Fold and unfold between

Start with a square coloured side up.

1 2 3

Fold the model in half diagonally. Fold one corner in to the middle.Fold and unfold the square in half diagonally along both axes. Then

turn the paper over left to right.

TAMA

4 65

Fold the corner up separate the layers and squash flat.

Fold the top layer up causing the sides to fold in.

Fold and unfold the edges to the middle.

WORLD OF FINAL FANTASY © 2016 SQUARE ENIX CO., LTD. All Rights Reserved. CHARACTER DESIGN: TETSUYA NOMURA / YASUHISA IZUMISAWA.

Diagrams © 2016 Creaselightning Limited www.creaselightning.co.uk

10 11

9

Repeat steps 3 to 6 on the other side.

Open the model back to a square.

Refold the outer corner along the creases made previously.

7 8

12

Fold the corner up. Fold point down to the right. Repeat steps 9 to 11 on the other side.

1

(3-6)

(9-11)

Fold the sides behind. Fold and unfold the upper section.

Fold the edges in to the middle.

13 14 15



Fold out the edges and open out the upper section.

Fold the section up diagonally.

Fold and unfold the upper section along the middle.

Fold the corner up. Separate the layers and squash flat.

Fold the section to the right.

Fold the edge down to the crease made previously and

unfold..

16 17

19 20 21

18

Fold the upper section over. Fold the edges of the upper layer behind.

Fold the tip of the corner over.

22 23 24



Fold the upper section down and then up again making a zig zag fold.

Turn the model over.Fold and unfold the lower section.

25 26 27

Fold and unfold the edge down to the lower edge.

28 29 30

Fold the edges of the upper section in between the creases.

Fold the lower section up.

31 32 33

Fold and unfold the lower section up and down again.

Fold the section back over and reverse fold the edge behind.

Fold the opposite side over.



34

37

35

38

36

39

Fold the tail over and repeat step 35 on the other side.

Complete.

Fold the lower corner and pinch the corner together.

Slide the ears out, separate the legs slightly and open the tail.

Turn the section inside out along the creases made previously.

Turn the model over left to right.

(35)

1 2 3

4 6 7

x2

5

Fold the model in half behind. Fold and unfold the outer edges to the middle.

Fold and unfold the rectangle in half.

Bows

Fold both sides in and out again making zig-zag folds.

Complete. Make two and add them to the model.

Rotate.Fold one side over.



TAMA

CROWN

TAMA’s CROWN

Start with a square coloured side up.

1 2 3

Fold and unfold the outer edges to the middle.

Fold and unfold between the creases made previously.

Fold and unfold between the creases made previously.

Fold and unfold the square in half diagonally along both axes. Then

turn the paper over left to right.

4 65

Repeat steps 2 to 4.Rotate the model 90°.

90° (2-4)

19 cm12 cm



10 11

9

Fold the upper section down and up again making a zig zag fold.

Fold the upper section down and up again making a zig zag fold.

Fold the upper corner behind.

7 8

12

Fold the sides in and out again and unfold.

Fold the sides in and out making a zig zag fold. At the same time fold

the inner section down.

Turn the model over.

Turn the model over.Fold the corner back up. Reverse fold out the trapped paper.

13 14 15



Fold the corners over. Fold the upper corner down.

Fold the lower corner up.

Tuck one end into the other and connect the two ends together.

Fold the corner up.

Fold the edge up again.

Fold the corners in.

Fold the edge over.

Crown complete.

16 17

19

22

20

23

21

24

18



TAMA’S CROWN



TAMA



Documents

TAMA - World of FINAL FANTASY · PDF fileTAMA CROWN TAMA’s CROWN Start with a square coloured side up. 1 2 3 Fold and unfold the outer edges to the middle. Fold and unfold between