TaeguTec’s Optimized Parting & Grooving line expands · TaeguTec’s Optimized Parting & Grooving line expands. February 2018 2/7 Taegutec has extended the range of the RHINOGROOVE

February 2018www.taegutec.com

1/7

TaeguTec’s Optimized Parting &Grooving line expands


2/7

Taegutec has extended the range of the RHINOGROOVE family by adding 4 and 5 mm inserts to the current 2, 3 mm line. Further, single-ended “C” and “J” chip breaker type inserts for deep machining are now available in 2, 3, 4 and 5 mm sizes.

Another addition are SH type holders suitable for Swiss type automatic lathes adding 3 mm holders to the current 2 mm insert seat size holders.

Features Double-ended inserts and related holders expanded to 4, 5 mm sizes Single-ended “C” & “J” chip breaker type inserts range expanded to 2,3,4 and 5 mm sizes RGER\L-SH holders for Swiss automatic lathes now includes 3 mm holders

KEY POINTThe RHINOGROOVE, optimized for parting and grooving, is now expanded to double-ended 4, 5 mm inserts and tool holders as well as single-ended 2, 3, 4, 5 mm inserts.


3/7

RDJ

Insert DesignationInsert seat size

Feed(mm/rev)

Coated

TT9080 TT7220 TT8020

RDC 2 2 0.05 - 0.183 3 0.07 - 0.254 4 0.08 - 0.305 5 0.09 - 0.35

RDCDouble-ended inserts for shallow grooving and parting with “C” type chip breaker

Double-ended inserts for shallow grooving and parting with “J” type chip breaker

Size Dimension (mm)CW RE BW INSL S CDX

2 2.0 0.20 1.7 14.0 4.0 133 3.0 0.20 2.4 14.0 4.0 134 4.0 0.30 3.0 14.0 4.0 135 5.0 0.30 4.0 17.5 5.1 17

Size Dimension (mm)CW RE BW INSL S CDX

2 2.0 0.20 1.7 14.0 4.0 133 3.0 0.20 2.4 14.0 4.0 134 4.0 0.30 3.0 14.0 4.0 135 5.0 0.30 4.0 17.5 5.2 17

: Standard Items

BW

INSL

CDX

CW±0.05

S

RE

BW

INSL

CDX

CW±0.05

S

RE


Feed(mm/rev)

Coated

TT9080 TT7220 TT8020

RDJ 2 2 0.04 - 0.123 3 0.04 - 0.164 4 0.05 - 0.185 5 0.05 - 0.20

: Standard Items


4/7

RSJ Single-ended inserts for deep grooving and parting with “J” type chip breaker

BW

INSL

CW±0.05

RE

S

Size Dimension (mm)CW RE BW INSL S

2 2.0 0.20 1.6 14.0 4.03 3.0 0.20 2.4 14.0 4.04 4.0 0.30 3.0 14.0 4.05 5.0 0.30 4.0 17.5 5.1


Feed(mm/rev)

Coated

TT9080 TT7220 TT8020

RSC 2 2 0.05 - 0.183 3 0.07 - 0.254 4 0.08 - 0.305 5 0.09 - 0.35

BW

INSL

CW±0.05

RE

S

Size Dimension (mm)CW RE BW INSL S

2 2.0 0.20 1.6 14.0 4.03 3.0 0.20 2.4 14.0 4.04 4.0 0.30 3.0 14.0 4.05 5.0 0.30 4.0 17.5 5.1


Feed(mm/rev)

Coated

TT9080 TT7220 TT8020

RSJ 2 2 0.04 - 0.123 3 0.04 - 0.164 4 0.05 - 0.185 5 0.05 - 0.20

: Standard Items

RSC Single-ended inserts for deep grooving and parting with “C” type chip breaker

: Standard Items


5/7

External shallow grooving and partingRGER/L

Designation Insert seat size

Dimension (mm) Torque(N.m) InsertH B OAL WF LH WB HBH CDX

RGER/L 1616-2T16 2 16 16 110 15.1 35 1.8 4 16 8.0 RDC/J RSC/J2020-2T16 2 20 20 125 19.1 35 1.8 - 16 8.0

2525-2T16 2 25 25 150 24.1 35 1.8 - 16 8.01616-3T16 3 16 16 110 14.8 35 2.4 4 16 8.02020-3T16 3 20 20 125 18.8 35 2.4 - 16 8.02525-3T16 3 25 25 150 23.8 35 2.4 - 16 8.02020-4T16 4 20 20 125 18.5 35 3.0 - 16 8.02525-4T16 4 25 25 150 23.5 35 3.0 - 16 8.02020-5T20 5 20 20 125 18.1 37 3.85 - 20 8.02525-5T20 5 25 25 150 23.1 37 3.85 - 20 8.0

Spare parts

DesignationScrew Wrench

RGER/L 16/20 SH M6x1x20 L-W 5RGER/L 25 SH M6x1x25 L-W 5

OAL

HBH

WF

LH

H H

WB

BCDX

Right hand shown


6/7

Designation Insert seat size

Dimension (mm) Torque(N.m) InsertH B OAL WF LH WB OAH HBH CUTDIA

RGER/L 12-24-2SH 2 12 12 125 11.1 19 1.8 19.0 2 24 2.0 RDC/J RSC/J16-24-2SH 2 16 16 125 15.1 24 1.8 21.0 - 24 2.0

12-24-3SH 3 12 12 125 10.8 19 2.4 19.0 2 24 2.014-24-3SH 3 14 14 125 12.8 19 2.4 19.0 - 24 2.016-24-3SH 3 16 16 125 14.8 19 2.4 21.0 - 24 2.0

DesignationScrew Wrench

RGER/L-SH TS 40A115I T15

H

B

WB

OAL

CUTDIALH

OAHH

WF

HBH

Right hand shown

External shallow grooving and parting for Swiss type lathesRGER/L-SH

Spare parts


7/7

Recommended Cutting Conditions

Steel Stainless steel Cast iron High temp. alloys

ISO Material ConditionTensilestrength(N/mm2)

HardnessHB

Material No.

Cutting speed Vc(m/min)

TT9080TT7220 TT8020

P

Non-alloy steel,cast steel, free cutting steel

<0.25%C Annealed 420 125 1 140-250 80-120>=0.25%C Annealed 650 190 2 130-220 80-110<0.55%C Quenched and tempered 850 250 3 90-200 70-90>=0.55%C Annealed 750 220 4 100-220 70-100

Quenched and tempered 1000 300 5 70-170 40-70Low alloy steeland cast steel(Less than 5% ofalloying elements)

Annealed 600 200 6 90-120 70-100

Quenched and tempered930 275 7 80-170 50-70

1000 300 8 70-130 40-601200 350 9 50-120 30-50

High alloy steel, cast steel and tool steel

Annealed 680 200 10 60-140 50-80Quenched and tempered 1100 325 11 50-70 30-60

M Stainless steeland cast steel

Ferritic / martensitic 680 200 12 70-170 80-120Martensitic 820 240 13 60-150 60-90Austenitic 600 180 14 90-180 60-90

K

Gray cast iron (GG)

Ferritic 160 15 100-230Pearlitic 250 16 90-180

Cast iron nodular (GGG)

Ferritic 180 17 190-300Pearlitic 260 18 120-220

Malleable cast iron Ferritic 130 19 120-250Pearlitic 230 20 100-210

S

High temp. alloys

Fe based Annealed 200 31 40-70Cured 280 32 30-50

Ni orCo based

Annealed 250 33 30-40Cured 350 34 15-25Cast 320 35 15-30

Titanium, Ti alloys Rm 400 36 90-190Alpha+beta alloys cured Rm 1050 37 30-60

Documents

TaeguTec’s Optimized Parting & Grooving line expands · TaeguTec’s Optimized Parting & Grooving line expands. February 2018 2/7 Taegutec has extended the range of the RHINOGROOVE