PSTVS13

Table Top TV Stand

Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us.

Telephone：800-5566-806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)Email：supportus@perlesmith.com (US/CA/DE/UK/FR/IT/ES/JP/AU)

V1.0

•Carefully open the carton, remove contents and lay out on cardbard or other protective surface to avoid damage.

•Check to assure that all components were received undamaged. Do not use damaged ordefective parts.lf you require replacement parts, contact customer service at supportus@perlesmith.com.

WARNING

•Install and operate this product with care. Please read this instruction before beginning the installation, and carefully follow all instructions contained herein. Use proper tools during installation.

•Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaim any liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.

•If you do not understand the instructions or have any concerns or questions, please contactcustomer service at supportus@perlesmith.com.

1

M8x15 (x4)

M-F M-G M-HD5、D8 washer (x4)

M8x45 (x4)

5mm spacer(x8) 10mm spacer(x8)

M6x15 (X4) M6x30 (X4)M-A M-B M-C M-D

(x2)2 (x1) 3

(x2)

7(x2)

6(x1)

8(x1)

5(x1)

4(x1)

M6-M10 wrench(x1)I

DD8 washer(x3)

ED10 washer(x1)

GRubber foot(x4)

F

D10 plastic washer(x2)

Support Pillar

Support Pillar

TV Plate

Plastic Cover Tempered Glass

Monitor Brackets

Safety Lock

M8x65 (x4)M-E

Component Checklist

H 5mm Allen key(x1)

M8x25(x3)A

M10(x1) B

M6(x4)C

Connecting the Support Pillar to Support PillarStep 2

8

5

5

54

Support Pillar

Tempered Glass

5mm Allen key

M8x25

STEP 1

A

D8 washer

Rubber foot

D

G

H

1.1

1.2

Connecting the Support Pillar to Tempered Glass

x 1

x 1

x 1

x 3

x 3

x 4

x 1

x 1

x 1

x 1

x 2

x 1

4

4

Support Pillar

6Plastic Cover

8

G

8

4

H Table

8

4

6

AD

5

F

I

E

B

B

I

E

F

M10

D10 washer

D10 plasticwasher

M6-M10 wrench

Step 4 Measure VESA and Check TV screws

TV Plate

M6-M10 wrench

M6

Connecting the TV Plates to Support Pillar

x 2

x 1

x 4

x 1

1

1

2

STEP 3

I

C

1

1 2

C

C

I

I

5

Check TV screws

When attaching brackets to the flat screen, be careful not to over tighten screws and be sure that screws do not bottom out in the mounting holes.

Too Short Too Long

Correct Correct

Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M4, M6, or M8) to use.

Measure the distance between the holes located at the back of your TV (these measures may form the shape of a square, or a rectan-gle) and check that these taken measures are within the VESA(*) range for this wall mount.(*) VESA: International standard established by the TV manufacturers used to determine if LCD/LED TVs are compatble with wall mounts.

Step 5 Mounting the Monitor Bracket to a TV

Step 6 Attaching TV to TV Plate

6.1

x 2

x 4

x 4

x 4

x 4

x 4

x 4

x 8

x 8

M8x15

M-F

M-G

M-H

D5、D8 washer

M8x45

5mm spacer

10mm spacer

M6x15

M6x30

M-A

M-B

M-C

M-D

3

3

3

Monitor Brackets

M8x65M-E

Firstly, make sure the diameter of the bolt (MA - E) fits your TV. Then, please see the figure above. You will need to thread the bolt into the TV using the correct hole in the washer (M-F) and spacer (M-H or M-G) if necessary. Please make sure the monitor brackets are vertically centered and level with each other

1

(M)A to E

M-F

M-G/M-H

Adusting Angle of TV StandStep 7

7Safety Lock

±30°

6.2

67

Fasten the screw

x 2

1