4
7 th International Symposium on Feedstock Recycling of Polymeric Materials (7 th ISFR 2013) New Delhi, India, 23-26 October 2013 S. No. Authors Names and Title E-WASTE CONVERSION PEWC-1 S. Oleszek, M. Grabda, E. Shibata and T. Nakamura Influence of Sb, Pb and Fe oxides on thermal degradation of Tetrabromobispehnol A (TBBPA). Thermogravimetric studies on recovery of the metal bromides PEWC-2 Mohammad Imran, Mohammad Atif Aleem Use of e- waste as thermo plastic and thermoset composites PEWC-3 S. Kanchi, N. Venkatasubba Naidu Separation and analysis of Ni(II), Co(II), Pb(II) & Zn(II): Capillary zone Electrophoresis Technique PEWC-4 S. Katano, ZZ.Hlaing, M. Adachi, Y.Yanagisawa and H. Nakagome, S.Uchiyama, K. Taniguchi Recovery of tantalum metal from used tantalum capacitor by using stream gasification PEWC-5 N.Venkatasubba Naidu, sKrishna Murthy, P.Ragavendra Kumar Synthesis, characterization and antimicrobial studies of Cu(ii), Pd(ii), Fe(iii) and Mn(ii) complexes of tetradentate N4 ligand PEWC-6 B.Ruj, J.S. Chang E-waste (cell phone) treatment by thermal plasma technique PEWC-7 N. Ortuño, J.A. Conesa, J. Moltó , R. Font Kinetic analysis and pollutant evolution during thermal degradation of printed circuit boards considering the effect of metals PEWC-8 A.Buekens, Xu Jian Zhou Recycling plastics from Automotive Shredder Residues PEWC-9 Y. Kodera, K. Sakamoto, H. Sekiguchi Demonstration on thermal treatment of asbestos-containing disaster waste for safe disposal and energy recovery PEWC-10 O. Terakado, H. Takagi, M. Hirasawa Emission behaviour of brominated compounds in thermal treatment of printed circuit board under inert and oxidative atmosphere PEWC-11 Yusaku Sakata, Thallada Bhaskar, Md. Azhar Uddin, Akinori Muto, P.T. Williams A strategy of the pyrolysis of c ommingled waste plastics for production of halogen (Cl, Br) free liquid fuels PEWC-12 Sunil Khandelwal, Masaki Takao E-Waste Recycling System by Global Co-Operation – A Proposal PEWC-13 Shyamala Mani, Amanda Northcross, Charles Perrino, Katherine Hammond Monitoring PBDEs in air during e-waste recycling PLASTICS CONVERSION PPC-1 B Ruj, M Puncochar, M Syc, PK Chatterjee, V Pandey, B Bhattacharya Plasma pyrolysis of scrap tyre - an option for energy Recovery PPC-2 S. Kumagai, G. Grause, T. Kameda and T. Yoshioka Simultaneous Recovery of Organic and Inorganic Materials by the Thermal Decomposition of Plastic-Metal Composites PPC-3Manu Agarwal, M V Rohit, Omprakash Sarkar, James Tardio 2 , S Venkata Mohan

Table rearranged 04 10 2013 - Welcome to CSIR-Indian ... 2013 poster presentations.pdf7th International Symposium on Feedstock Recycling of Polymeric Materials (7th ISFR 2013) New

Embed Size (px)

Citation preview

7th International Symposium on Feedstock Recycling of Polymeric Materials (7

th ISFR 2013)

New Delhi, India, 23-26 October 2013

S. No. Authors Names and Title

E-WASTE CONVERSION

PEWC-1S. Oleszek, M. Grabda, E. Shibata

and T. Nakamura

Influence of Sb, Pb and Fe oxides on thermal degradation of Tetrabromobispehnol A (TBBPA).

Thermogravimetric studies on recovery of the metal bromides

PEWC-2 Mohammad Imran, Mohammad Atif Aleem

Use of e- waste as thermo plastic and thermoset composites

PEWC-3 S. Kanchi, N. Venkatasubba Naidu

Separation and analysis of Ni(II), Co(II), Pb(II) & Zn(II): Capillary zone

Electrophoresis Technique

PEWC-4 S. Katano, ZZ.Hlaing, M. Adachi, Y.Yanagisawa and H. Nakagome, S.Uchiyama, K. Taniguchi

Recovery of tantalum metal from used tantalum capacitor by using stream gasification

PEWC-5 N.Venkatasubba Naidu, sKrishna Murthy, P.Ragavendra Kumar

Synthesis, characterization and antimicrobial studies of Cu(ii), Pd(ii), Fe(iii) and Mn(ii) complexes

of tetradentate N4 ligand

PEWC-6 B.Ruj, J.S. Chang

E-waste (cell phone) treatment by thermal plasma technique

PEWC-7 N. Ortuño, J.A. Conesa, J. Moltó

, R. Font

Kinetic analysis and pollutant evolution during thermal degradation of printed circuit boards

considering the effect of metals

PEWC-8 A.Buekens, Xu Jian Zhou

Recycling plastics from Automotive Shredder Residues

PEWC-9 Y. Kodera, K. Sakamoto, H. Sekiguchi

Demonstration on thermal treatment of asbestos-containing disaster waste for safe disposal and

energy recovery

PEWC-10 O. Terakado, H. Takagi, M. Hirasawa

Emission behaviour of brominated compounds in thermal treatment of printed circuit board under

inert and oxidative atmosphere

PEWC-11 Yusaku Sakata, Thallada Bhaskar, Md. Azhar Uddin,

Akinori Muto, P.T. Williams

A cstrategy cof cthe cpyrolysis cof commingled cwaste cplastics cfor cproduction cof c chalogen c(Cl, cBr) cfree

liquid fuels

PEWC-12 Sunil Khandelwal, Masaki Takao

E-Waste Recycling System by Global Co-Operation – A Proposal

PEWC-13 Shyamala Mani, Amanda Northcross, Charles Perrino, Katherine Hammond

Monitoring PBDEs in air during e-waste recycling

PLASTICS CONVERSION

PPC-1 B Ruj, M Puncochar, M Syc, PK Chatterjee, V Pandey, B Bhattacharya Plasma pyrolysis of scrap tyre - an option for energy Recovery

PPC-2

S. Kumagai, G. Grause, T. Kameda and T. Yoshioka

Simultaneous Recovery of Organic and Inorganic Materials by the Thermal Decomposition of

Plastic-Metal Composites

PPC-3c Manu Agarwal, M V Rohit, Omprakash Sarkar, James Tardio2, S Venkata Mohan

7th International Symposium on Feedstock Recycling of Polymeric Materials (7

th ISFR 2013)

New Delhi, India, 23-26 October 2013

Production of fuels from waste plastic and sewage sludge via thermo-chemical routes

PPC-4 Y. Morohoshi, S.Kumagai, G. Grause, T. Kameda and T. Yoshioka

Determination of the proportion between hydrolysis and pyrolysis during Poly (ethylene

terephthalate) degradation in O-labeled steam

PPC-5Y. Nagasaki, K. Hashimoto, G. Grase, T. Kameda, T. Yoshioka

Modification of PVC with long alkyl chains by nucleophilic substitution

PPC-6 Gyung-Goo Choi, Seung-Jin Oh, and Joo-Sik Kim

Intermediate pyrolysis of scrap tires in a fixed bed reactor and activation of

the pyrolysis char using CO2: Characteristics of pyrolysis products and activated char

PPC-7 Onam Khare, Haripada Bhunia

Mechanical properties and biodegradability studies of HDPE-PLLA

blended packaging films

PPC-8 E.A. Evbade, M. Yukumoto

Introduction of recycled plastic pallet and its mechanical properties

PPC-9 Shuo Cheng, Mochamad Syamsiro, Harwin Saptoadi and Kunio Yoshikawa

Effect of HCl Pretreatment on the Performance of Natural zeolite in a sequential Pyrolysis and

Catalytic Reforming of Polypropylene

PPC-10 J. Liu, Y. Liu, Z.Q. Yu and T. Tang

Organocatalytic depolymerization of anhydride cured epoxy Resin at mild conditions

PPC-11 H. Itou, K.Hosokawa, Y.Ohki, H. Nakagome and T. Kamo

Recovery of useful materials from thermoset composite materials by

Liquefaction

PPC-12 I. de Marco, A. Lopez-Urionabarrenechea, A. Adrados, B.M. Caballero, M.F. Laresgoiti and J. Solar Contribution of polyolefins, polystyrene and cellulosic materials to the

quality of packaging waste pyrolysis products

PPC-13 I. Duque-Ingunza, R. López-Fonseca, B. de Rivas-Martín, J.I. Gutiérrez-Ortiz

Studies on process optimization for catalytic glycolysis of post-consumer pet wastes

PPC-14 Q.Zhou, P.Yang

and Y.Z.Wang

Recycling of anhydride -cured epoxy resin using polyethylene glycol/ NaOH

PPC-15 Y.Harikrishna, V.Pavan Kumar and V.Venkat Rao

Characterization & Reactivity of Pd catalysts Supported on Spinel MgAl2O4 for Coupling of

Ethylbenzene Dehydrogenation with Nitrobenzene hydrogenation

PPC-16 D. Sasaki, Y. Yoshihiro, T. Hoshi, T. Hagiwara, T. Sawaguchi

Effectively terminal functionalization of precise products obtained by controlled thermal

degradation of polypropylenes

PPC-17 Gaurav Chauhan, Shikhar Tripathi

Feedstock recycling of polyurethane: a review

PPC-18 Raj Kumar Sardar & Bhavanath Jha

Isolation and identification of marine bacteria for polyethylene degradation

PPC-19 V. Rekha and N. Lingaiah

Development of solid acid catalysts for the conversion of waste plastics into valuable fuel range

hydrocarbons

PPC-20 T. Sugeno, H. Tagaya

The effects of solvents on the chemical decomposition of foamed phenol resin in high ―temperature

fluids

PPC-21 K. Ohkubo, H. Tagaya

Studies on the chemical recycling of wastes containing PVC, PVDC and PPS

7th International Symposium on Feedstock Recycling of Polymeric Materials (7

th ISFR 2013)

New Delhi, India, 23-26 October 2013

PPC-22A. Tsuchida, Y. Tsuchida, T. Yoshida, K. Arikata

and H.Kawazumi

Versatile waste plastic identifier Based on Raman spectroscopy for material recycle

PPC-23 Ajay Kumar, Manisha Sahai, H U Khan, M O Garg & Sanat Kumar

Kinetics study of polyethylene degradation in batch reactor

PPC-24 Nimisha R Nair, Vini C Sekhar, Ashok Pandey and K Madhavan Nampoothiri

Microbial Degradation of the Solid waste Poly (L) Lactic acid Plastics

PPC-25 Katsuhide Murata, Mihai Brebu

Mechanistic consideration for the thermal degradation of polymers based on a continuous flow

operation

PPC-26 Katsuhide Murata, Mihai Brebu

Estimation of boiling points of PP degradation products and its relevance to NP-gram method

PPC-27 Takeo Matsuda, Naoko Doi, Norio Hashimoto, Masataka Tsukada

Electrical Generator System by Compact Thermolysis Plant

PPC-28 Y. C. Rotliwala, J. A. Shah, N. Dhingra, D.B. Parekh and P. A. Parikh

Plastics/Biomass copyrolysis in an auger reactor: Physico-Chemical analysis of the products

PPC-29 C.G. Saravanan. P. Premkumar and M. Gopalakrishnan

Conversion of HDPE into hydrocarbons using fly ash as catalyst

BIOMASS CONVERSION

PBC- 1Seung-Jin Oh, Gyung-Goo Choi, Su-Hwa Jung

and Joo-Sik Kim

Characteristics of fast pyrolysis of corncob using ZnCl2 for the production of furfural and acetic acid

PBC-2 Desavath V. Naik, T. Bhaskar, N. Atheya, K.K. Singh, Ajay Kumar, Mukesh K. Poddar, B. Bhavya,

Dilip K. Adhikari, Madhukar O.Garg

Catalytic Cracking of Jatropha-derived fast pyrolysis oil using FCC E- catalyst

PBC-3 H. Yasuda, Y. Suzuki, Y. Oshima and H. Nakagome

Feedstock adaptability to pressurized fixed bed Gasification

PBC-4P. Gupta, B Behera, V. Bhanu Prasad, Jagdish Kumar,

and Y.K.Sharma, S.S. Ray

Microwave assisted catalytic depolymerization of biomass and product

Characterization

PBC-5 M. Arun Kumar, P. Swamy, M. Naresh, M. Mahender Reddy and N. Narender

Iodine-catalyzed tandem synthesis of terminal acetals and glycol mono esters from olefins and

biomass-derived glycols

PBC-6 Mritunjay Kumar Shukla, Eshan Singh, Iranna Gogeri, Mohd Asif, Satish Singal

Prospects of 2, 5-Dimethylfuran as a fuel: Physico-chemical and engine

performance characteristics evaluation

PBC-7 B.Viswanadham, A. Srikanth, Y. Satyanarayana, K. Ramu and K. V. R. Chary

Dehydration of Glycerol over Supported Vanadium Substituted Phosphomolybdic Acid Catalysts

PBC-8G. Srinivasa Rao, N. Pethan Rajan, Ashish Kumar, N. Nagaraju and K.VR Chary

Gas-phase dehydration of glycerol over WOx/ZrP catalysts.

PBC-9 S. Sakai, C.Igarashi, Z Z. Hlaing, M. Adachi, Y.Yanagisawa, S.Uchiyama and H. Nakagome

Effective use of energy from disease cedar of Sanbu region in Japan

PBC-10 Rahul Singh Chutia, Rupam Kataki and Thallada Bhaskar

Production of renewable hydrocarbon through catalytic pyrolysis of large bio-polymers: A review

PBC-11 Priti Sharma, A.P. Singh

Mn(III) based binapthyl cSchiff base complex hetrogenized over organo-modified SBA-15

PBC-12 Rajiyung Saundarya Barman, Rupam Kataki, Bimala Prasad Baruah and Prasenjit Saikia

7th International Symposium on Feedstock Recycling of Polymeric Materials (7

th ISFR 2013)

New Delhi, India, 23-26 October 2013

Effect of pyrolysis temperature on bio-oil production and their chemical properties

PBC-13 Subhajit Das, Prasenjit Saikia, Bimala Prasad Baruah and Rupam Kataki

Microwave assisted preparation of activated carbon from indian bambusa balcooa

PBC-14Priyanko P Gohain, Shasi D Baruah and Rupam Kataki

Biodiesel production from tea seed oil

PBC-15 Bhavya Balagurumurthy, Rawel Singh, Twinkle S Oza

and Thallada Bhaskar

Effect of temperature and pressure on the hydropyrolysis of cotton residue

PBC-16 S.Ojha, S.K.Acharyar, G.Raghavendrar

Morphological and mechanical properties of bio wastecoconut/bael shell polymer composite

PBC-17 D Ghosh, D DasGupta, D Agrawal, SK Suman, R Khan, DP Bangwal, MS Negi, D Pandey, VT

Vadde, RK jain, S Kaul, D.K.Adhikari

Bagasse pith based biorefinery: a practical approach and valorization

PBC-18 A. Hari Padmasri, Ch. Anjaneyulu, M. Kotesh Kumar, A. Venugopal

Ni supported on modified CeO2 for steam reforming of bio-glycerol for the production of

hydrogen

PBC-19 Rawel Singh, Bhavya Balagurumurthy, Aditya Prakash, and Thallada Bhaskar

Hydrothermal liquefaction of agricultural and forest biomass residue: comparative study

PBC-20 Anjireddy Bhavanam and R.C.Sastry

Energy recovery potential and characterization studies of sawdust and rice husk

PBC-21 R.B.Kshatriyaa, Dr.G.M.Nazeruddin

Bioactive flavonoids of therapeutic importance

PBC-22 M. R. Deshpande, C.V.Rode, U.D.Joshi

A Green and Efficient Route for Knoevenagel Condensation Over Rice Husk Based MCM-41