Table of Contents

Preface and Conference Organization

Chapter 1: Composites

Influence of POSS Content on the Thermal Properties of PAN/POSS NanofibersS.Z. Zhou, X.Y. Song and B.W. Cheng 3Preparation and Flame Retardancy of Waterbased Phenolic Resin/Silica Hybrid MaterialPrepared by In Situ PolymerizationT.B. Yuan, G.L. Xu, Y. Wang, J. Yang and J. Hu 7Effect of SiC and ZrO2 on Low Temperature Oxidation Resistance of MoSi2 NanocompositesC.H. Liu, Y.L. Ai and B.L. Liang 11Finite Element Analysis of Diamond Wire Saw Slicing SiCp-Al CompositesC.Y. Zhang, Y. Sun and L.G. Zhao 16Simulated Sun-Light-Driven Degradation of Rhodamine B by Porous Peanut-like Sm-Doped BiVO4 Sub-MicrostructuresB.W. Cao and Y.H. Xu 20Effect of Load on the Tribology Behavior of Cu-Based Self-Lubricating CompositeR.G. Zheng and X.X. Zhang 24Structural and Tribological Properties of MoS2/Polyimide Composites Exposed to AtomicOxygen EnvironmentX.L. Wang 28Fabrication of Diamond-Structure Alumina Photonic Crystal with Rectangle Cavity Defectand its Microwave PropertiesS.B. Chen, Y.S. Yao and R.L. Wang 34The Influence of Sintering Temperature on the Mechanical Properties and Microstructureof Carbon Nanotubes/Zirconia/Hydroxyapatite BiocompositesA.M. Li, K.N. Sun and R.H. Fan 38Warm Compaction and Characterization of Paniculate Reinforced CSP/Al CompositeMaterialH. Zhang, W. Hua and Q.D. Wu 43Analysis to Mullite Bonded Corundum Purging PlugX.H. Ren, P. Zhao, Q.H. Lai and X. Qin 49Effects of MAPE Modified on Physico-Mechanical Properties of Silvergrass ReinforcedHigh Density Polyethylene CompositesW.W. Yu, C.H. Li, J. Li, J.P. Zhang and C.W. Wang 53Quasi-Static Out-of-Plane Compression of Hollow Integrated Woven Textile SandwichCompositesW. Su, Y. Xiang, Y.F. Jiang, S.Q. Huang, H.L. Fan and R.H. Liu 58Characterization of Cold-Sprayed FeAl/WC Nanocomposite CoatingH.T. Wang, R.Y. Wang, X. Chen, X.B. Bai, Z.X. Dong and G.C. Ji 63Study on TiO2/Tourmaline Composite Photocatalyst MaterialsY.W. Feng 67Comparative Study on Design Schemes of Composite Holding Pole StructureD. Ni, Q. Miao, Y.J. Xia and Y.J. Hao 72An Evaluation on Impact Performance of Light-Weight Composite Honeycomb SandwichPanelsJ. Ren, Y. Iwakawa and J.M. He 78Effects of PMDI Treatments on Thermal Properties of Silvergrass Reinforced High DensityPolyethylene CompositesD. Xue, W.W. Yu, Q. Liu, L. Jing, X.J. Liu and W. Lei 84Piezoresistivity of Polymer-Derived AlSiCN CeramicsL.G. Zhang, Y.S. Wang and L.N. An 89

Applied Materials and Technologies for Modern ManufacturingApplied Materials and Technologies for Modern ManufacturingApplied Materials and Technologies for Modern ManufacturingApplied Materials and Technologies for Modern ManufacturingISBN(softcover): 978-3-03785-888-2 ISBN(eBook): 978-3-03826-269-5

Efficient Analysis of the Electromagnetic Energy in Dispersive Composite MaterialsK.B. Tan, Y.C. Song, T. Su, F.F. Fan and H.M. Lu 93Multifunctional Non-Woven Carbon Nanopaper: Fabrication, Properties, and ApplicationsJ.H. Gou, F. Liang, Y.J. Xu and B. Mabbott 97

Chapter 2: Micro/Nano Materials

Preparation of Continuous Electrospun Nanofiber Yarn with an Auxiliary RotatingCircular PlateW.J. Gao, X.E. Wang, K. Wang, J. Fan and Y. Liu 109Current Automatic Control Technology for n-Type Macroporous Silicon Photo-Electrochemical EtchingX.N. Li, G.Z. Wang, F.Y. Yu, Y. Zhang, Y.Z. Liang, J. Chai, J.K. Yang and Q.D. Duanmu 113The Influence of Surfactants on Crystallization of Nanocrystalline HZSM-5 ZeoliteJ.F. Wei, F. Zhu and X.Y. Zhang 117Photocatalytic Activity of Titania Nanowire Arrays by Sol-Template MethodM.L. Li, Q. Yu, K.M. Qian and Y.S. Zhou 121Fabrication Using Focused Ion Beam Processing of Devices Employing Silicon-BasedNanowires Synthesized by Vapor-Liquid-Solid GrowthH. Sone, Y. Nakamura, Y. Suda and S. Hosaka 125In Situ Growth of Carbon Nanotubes on Carbon Foam for Enhanced Oil AdsorptionJ.J. Liang, Z.B. Zhao, H. Hu and J.S. Qiu 130Synthesis and Characterization of Monodisperse Nanocrystalline HZSM-5 ZeoliteJ.F. Wei, F. Zhu and X.Y. Zhang 135The Formed Mechanism of Pores in Plasma Sprayed Nanostructured Al2O3/TiO2 CoatingsW.Q. Wu and Z.Y. Wei 139Preparation of Nano WO3-Doped Materials and Optical PropertiesB.J. Sun 145Preparation and Characterization of CA-PEI Double Modification Water-Based MagneticFluidX.S. He, H.Q. Peng, J. Li and J. Dong 151Synthesis of Bismuth Nanoparticles by a Simple One-Step Solvothermal Reduction RouteM.L. Zhang, C. Feng, W.X. Zhang, X.W. Luan, J. Jiang and L.F. Li 155Synthesis and Characterization of Poly (methyl methacrylate) -Grafted-Cellulose NanofiberC. Wang, Q. Li, J.H. Yang, J.Y. Wada, T. Kawai, Y. Kasai, H. Hayashi and S. Kuroda 159Enhanced Photocatalytic Performance of Iodine Doped Bi2WO6 Nanostructures underVisible-Light IrradiationB.W. Cao and Y.H. Xu 163

Chapter 3: Iron, Steel, Metals and Metal Alloys

Influence of Zinc Content on Anti-Corrosion Performance of Zinc-Rich CoatingsG.X. Li, B.J. Li, Y.L. Peng and W.T. Yue 169Anti-Corrosion Performance of the Hot-Dip Coating Containing Zn-Al-Mg-CeG.X. Li, D. Yang, Y.L. Peng and W.T. Yue 173Role of Aging Precipitates on Mechanical Properties of HNS with Different NitrogenContentZ.R. Zhang, Z.Y. Zhao, C.Z. Li, Z.H. Jiang and H.B. Li 177Finite Element and Molecular Dynamics Multiscale Framework for TRIP Steel Macro andMicro Material Behavior InvestigationH.Y. Li, X.C. Li, J.H. Li, J.I. Ma and Y.J. Zhang 182Thermodynamics Analysis of Microalloying Technology for Developing High Strength ColdRolled Structural Steel SheetC.Y. Ma, C. Wang, K.Y. Shen and J.P. Yuan 187Intermediate-Temperature Oxidation of Fe-Cr-Ni-Mo Stainless Maraging Steel in AirF.Y. Meng, T.F. Su, J.D. Guan, J. An and X.X. Lv 192

b Applied Materials and Technologies for Modern Manufacturing

Investigations on the Fatigue Property of the High-Strength and Toughness 211Z CastingAluminium AlloyX.M. Zhang, J. Mao, Y. Che and Z.K. Zhang 197Critical Carbon Concentration and Excessively High Bath Temperature for SmeltingFerrochromium in the Argon-Oxygen FurnaceM.R. Han, L.Q. Huang and B. Jia 202The Influence of Gd on AM60B Magnesium Alloys' StructuresJ. Feng 207Study on Corrosion Resistance of Carbon Steel/Stainless Steel Composite PipeS.Y. Gou and Y.H. Li 212Preparation of Ti3Al Based Alloy Expansion Part for Nozzle by Powder MetallurgyZ.B. Lang, Z.W. Yin, J.L. Shi and F. Zhao 219Water Modeling Study on Removal of Inclusions in RH DegasserC.J. Yang, F.P. Tang and T. He 225Effects of Two-Stage Solution Heat Treatments on Microstructures and Properties of Cu-Cr-Zr AlloyH.F. Xie, L.J. Peng, Z.H. Wang and X.J. Mi 230Thermodynamic Calculation of the Precipitate in Cu-Ni-Si-Co Alloys and ExperimentalInvestigationJ.W. Wang, X.P. Xiao and G.J. Huang 235Establishment of Flow Stress Model of EW75 AlloyM.L. Ma and K. Zhang 241Applying Research on Creep Constitutive Model of No.35 Steel Based on BC-BPNNX.H. Peng, J. Li, Y.F. Jiang and M. Yu 247Investigation on Mechanical Properties of 6H-SiC CrystalM. Jin, J.Y. Xu, Y.Q. Chu, Y.Z. Fang, H. Shen, G.J. Jiang and Z.Y. Wang 251Research on Optical Properties of Ga1-xAlxN with Different Al ComponentM.Z. Yang, J. Guo and M.S. Wang 258Porosities and Fatigue Property of Two A356 Cast Aluminum AlloyY.B. Zhang, C.X. Teng and T.G. Zhai 263Finite Element Simulation of Aluminum ECAP Material FlowJ.H. Li, Z.J. Yu, D.Z. Xiao and L.P. Zhang 267Perpendicular Magnetic Anisotropy in Fe/MgO Multilayer Film Measured by MagneticCompton ScatteringT. Kato, K. Suzuki, S. Takubo, Y. Homma, M. Itou, Y. Sakurai and H. Sakurai 271Microstructure and Mechanical Properties of 40CrNiMo7 Steel after High Current PulsedElectron Beam TreatmentH.H. Wang and S.Z. Hao 276Research on Microstructure Evolution Laws of Ultrafine Grained Metastable AutomobileSteelJ.G. Li, H.L. Huang, S.W. Zeng, J.L. Cao and T.J. Wang 281Effects of Different Alloy Composition on Magnetic Properties of Non-Oriented ElectricalSteelC.G. Pei, P.K. Bai and Z.X. Guo 286Effects of Different Alloy Composition on Phase Transformation of Non-Oriented ElectricalSteelC.G. Pei, P.K. Bai and Z.X. Guo 290Research on Thermo Effects of Silver Modified by High-Intensity Pulsed Ion BeamD. Wu 294

Chapter 4: Polymer

Study on the Structure and Properties of the Low Melting Point of Nylon 6 Modified byOrganic MontmorilloniteM. Zhang, S.J. Lu, J. Yu, E.H. Xu, M. He and D.X. Liu 301Studies on the Tensile Properties and Flow Performance of the Different Molecular-WeightPolycarbonateH.Y. Gong, Y.L. Fu, X.B. Su, H.X. Li and S.F. Wang 307

Applied Mechanics and Materials Vols. 423-426 c

Study on Adhesion Properties of Poly (sodium acrylate)-Polyvinyl Alcohol Super AbsorbentResinZ.H. Du, H.J. Huang, H.J. Wan, L. Jiang and G.S. Wan 312Study the Wet-Absorb and Fast-Dry Properties of the Coolplus Fiber/Cotton CompoundFabricsG.P. Xu, X.H. Luo, H.B. Qiu and Y.J. Zhu 318Study of the Mechanical Properties and Releasing Anion Capacity of Anionic FunctionalPET FiberA.H. Wu, G.P. Xu, G.H. Luo and X.H. Luo 322Lifetime Prediction of Nitrile Butadiene Rubber Used for O-Ring SealingT. Yu, H. Zhang, J.F. Sheng and Y.X. Liu 326Study on Magnetic Polymer ICF Target Prepared by the Electroless PlatingS.B. Cui, F.W. He and Z.Y. Lu 331Preparation of Magnetic Polymer ICF Pellet by the Electroless PlatingS.B. Cui and F.W. He 335Experimental Study of Material Thickness Effect on Combustion Characteristic for MoldedPolystyrene BoardM. Zhang, W.H. Song, X.N. Liu, C.H. Li and J. Wang 339Stress Wave in Gelatin from Temporary CavityG.L. Mo and Z.L. Wu 347

Chapter 5: Biological Materials and Technologies

Identification and Monitoring Strategy of Macrophomina phaseolina from ImportedSoybeansJ. Sun, S.S. Chen, C. Yu and C.Y. Yang 353Effects of Bcl-2, Bax and P53 Gene Protein Expressions in Gastric Cancer Tissue on theApoptosis of Cancer CellsL. Zhang, D.P. Li and G.N. Lu 358Correlations of Bcl-2 and Survivin Gene Protein Expressions in Colorectal CancerY. Ma and H.S. Wang 362Effect of 1-MCP and O3 on the Qualities of Dendrobium Officinale StorageJ.Q. Meng, H.J. Liu, X.H. Li, L. Chen, L.X. Du and J.S. Luo 366Regenerated Bamboo Fiber from Green SolventT. Cai, Y.M. Wang, Y.R. Yang, M. Wei and M.K. Wang 370Anti-Aging Effects of Deoxyschizandrin in D-Galactose-Induced Aging RatsX.D. Huang, J. Ying, Y.C. Wang and K. Ren 373Research and Preparation for Nanoemulsion of Macadamia integrifolia OilB.Q. Zhu, L.J. Lin, J.H. Li, M.F. Huang and K.Y. Zhang 378Cardioprotective Effects of Lignanoid against Doxorubicin-Induced Oxidative Stress in RatY.C. Wang, K. Ren, L. Meng, H.Y. Fan and N. Shen 382The Analysis on Composition and Structure of the Eri-SilkW.Z. Wang, L. Zhao and L.S. Fan 386Super-Hydrophobic Surface Manufacture on Pyrolytic Carbon via Electrostatic SpinningMethodR.X. Li, Z. Wang and S.K. Liang 391Foamed Buffer Material Made from Fibers of Old NewspaperD.Q. Wang and B. Yan 395Thermal Degradation of Hemp Treated with Guanidine NitrateY.L. Yang 400Synthesis, Characterization and Properties of the IA / SAS CopolymerZ.F. Liu, H.L. Fu, L.H. Zhang, Y.H. Zhang and X. Liu 404

Chapter 6: Optical Materials and Engineering

d Applied Materials and Technologies for Modern Manufacturing

Influence on Red Long-Lasting Phosphorescence due to Different Doping Concentrations ofZnGa2O4:Cr3+R.X. Zhong, Z.R. Liu, Q. Qiu, J.Q. Qi and X.Y. Zhang 411Influence on Afterglow Spectra due to Different Phases of Zn3(PO4)2: Mn2+Z.R. Liu, R.X. Zhong, H. Zhao and X.Y. Zhang 415The Spectral Properties and Thermal Stability ofAlCr-AlCrONSolar Selective Absorber CoatingY.N. Li, X.R. Liu, Y.F. Cui, J.Q. Liu, G.M. Xie and C. Wang 419Luminescent Properties of LiTaO3:Tm3+, Yb3+ Phosphors Prepared by Ball Milling MethodX.Z. Wang, Z.X. Liu, H.J. Gao, Y. Jing, C.L. Li and J. Liu 426Synthesis and Characterization of Luminescent Properties of NaGdF4 PhosphorsC.L. Li, T. Li, J. Liu, X.Z. Wang, H.J. Gao, Z.X. Liu and W.Z. Song 430The Mechanisms on the Transmittance and Photo-Catalytic Activity of TiO2 Film Dopedwith SiO2/PEGW.W. Dou, G.W. Huang, Y.C. Niu, X.L. Wang and X.J. Liu 435Theoretical Study on Absorption Properties of InxGa1-xAs with Different in ComponentJ. Guo, M.Z. Yang and M.S. Wang 439On Antireflective Coatings with Stable Hydrophobicity for Solar TubeW.W. Dou, Y.C. Niu, X.J. Liu, X.L. Wang and Y. Xu 443The Temperature Field Caused by Sphere Inclusion in Dielectric Irradiated by Single PulseLaserC.H. Huang, X.H. Sun and Y.H. Sun 448The Temperature Field Caused by Sphere Inclusion in Dielectric Irradiated by Multi-PulseLaserC.H. Huang, X.H. Sun and Y.H. Sun 452

Chapter 7: Chemical Engineering

Effects of Alkali Metal Content and Sintering Temperature on the Structure and ElectricalProperties of (Na0.52K0.48) 0.94+xLi0.06-xNb0.94Sb0.06O3 Lead-Free Piezoelectric CeramicsH.T. Li, X.B. Hong, H.Q. Huang, J.F. Gong, Z.Y. Cheng and H. Guo 459Synthesis of Light Olefins from CO2 Hydrogenation on Fe/ZSM-5 CatalystL. Yang, J. Li and J.X. Cao 463The Synthesis of Cadmium Sulfide and Cadmium Selenide NanostructuresY.H. Zhang, X. Cheng and Q. Wang 467Removal of Carbonyl Compounds in Diesel Exhaust Gas by Direct Non-Thermal PlasmaF. Jiang, Y.X. Cai, W.H. Han, X.H. Li, M. Dong and Y.Y. Chen 471Research of the Reactivity Photoacoustic Characteristics of PETN and HNS Induced byLaserH.E. Wang, W. Zhang, R.Q. Shen, Y.H. Ye and L.Z. Wu 479The Efficient Thermal Management of Proton Exchange Membrane Fuel CellsS.M. Sun, Y. Shi and W. Liu 483Effect of Temperature on Decomposition of Magnesium BicarbonateY. Li, X.J. Wang, B. Wu, H.J. Tang and Y.Y. Xie 488The Phase Change Study of High Titanium Slag during Heat TreatmentS.Q. Wan, C.H. Liu, D.J. Lan, H.B. Han and H.J. Hou 493Synthesis and Characterization of Thermoplastic Poly (ether-imide) Elastormer Based onDi-(4-Aminopheny)Methane-Pyromellitimide UnitJ.J. Shang, M. Lei, S.J. Lin, J.W. Lan, X. Huang and W. He 498An Electrolyte Additive for Use in High-Voltage Lithium-Ion BatteriesA.F. Liu 503The Influence of Technological Conditions on Cell Density and Cell Morphology of PPESKMicroporous MaterialM.J. Qu, T.Q. Li, L.J. Zheng, S.Y. Zhu, L.L. He, J. Guo, Y.M. Gong and B. Du 507Progress of Purification and Application of BariteT. Huang, S.M. Lei, E.W. Wang and G.M. Bao 511

Applied Mechanics and Materials Vols. 423-426 e

A Research on an Inner Core Replaceable Alkaline BatteriesD.Y. Qiao, X.Q. Lin, L.H. Lin and W.C. Lin 515Preparation and Characterization of Foaming Poly (phenylene ether ketone) PPEK byUsing Supercritical Carbon DioxideM.J. Qu, S.Y. Zhu, L.J. Zheng, T.Q. Li, L.L. He, J. Guo, J. Zhao and B. Du 519Preparation and Characterization of Phloroglucinol-Resorcinol-Formaldehyde CarbonAerogelsX. Liu, Z.F. Liu, H.L. Fu, R. He and L.H. Zhang 523Synthesis and Polymerization Kinetics of PMMA in Imidazolium Ionic LiquidsP. Wang, Y. Liu, W. Su and L. Liu 528Effect of Ce0.8Sm0.2O1.9 Interlayer on the Electrochemical Performance of LaBaCo2O5+δCathode for IT-SOFCsR.F. Li, S.C. He and L.C. Guo 532Atmospheric Pressure Non-Equilibrium Plasma Deposition with Retention of FunctionalGroupJ. Yan, Y. Kondo, X.Y. Qian, X.M. Fei, K. Hosoi, T. Mori and S. Kuroda 537Effects of Sintering Temperatures on the Solid-Phase Synthesis of Lithium VanadiumPhosphate for Lithium-Ion Cathode MaterialsD.W.S. Shi, W. Wang, Z. Zhang and X.Q. Liu 541Adsorption of Chloride Anion by Calcined Mg-Al-Fe Layered Double Hydroxides inWastewaterW.Y. Zhang, Y. Liu and L.J. Xi 545Preparation of FePO4•2H2O with Flower-like Microstructure by a Facile HydrothermalSynthesis MethodB. Jiang, W.Q. Wang, Y.S. Liu and Z.M. Guo 550Study on the Preparing of Nanowhite Carbon Black by Silica FumeX. Zhi and Z.C. Guo 554Preparation of F, Cl and Nitrogen Doped TiO2 and their Photocatalytic Properties ResearchC.T. Hou and F. Lv 560Review of Germanium Recovery Technologies from CoalD. Xu, Y.W. Chen, H. Guo, H.Q. Liu, Y.D. Xue, W.F. Zhang and Y.C. Sun 565Thermal Degradation of Epoxy Resins Containing Aluminum CompoundsY.L. Yang 574Effect of Liquefying Agents Mixed with Lower Alcohols and Reaction Temperature on theMicrowave Driven Liquefaction of WoodZ. Wang and Z. An 578Preparation of Chitosan and Epichlorohydrin Cross-Linked Adsorbents and AdsorptionProperty of DyesC.G. Li, F. Wang, W.G. Peng and Y.H. He 584The Application of Differential Scanning Calorimetry to Thermal Analysis for EnergeticMaterialsY.K. Chen, M.H. Chen, T. Zhang and X.L. Wu 588Influence of Cu Doping on the Thermoelectric Properties of Bi1.5Pb0.5Sr1.8La0.2Co2OyQ.L. He, Z.Y. Guo, X. Hu and H.Z. Song 593Molecular Dynamics Simulations of the Effect of Carbon Concentration on Silicon CarbideCrystal GrowthQ.F. Hu, N.G. Zhou, T. Hong, L. Luo, K. Li and L. Zhou 597Application of Dividing Wall Column in Industrial Naphthalene Distillation: A SimulationStudyE.Q. Wang 602

Chapter 8: Mineral Mining and Processing

A Evaluation on Pulverized Coal Combustion Properties Using a ThermogravimetricAnalyze MethodY.H. Gao and L.T. Bian 609The Adaptability Study for Developing Tight Gas Reservoirs Using Horizontal WellsS.Q. Peng and W.C. Zhao 614

f Applied Materials and Technologies for Modern Manufacturing

Reservoir Architecture Analysis of 8th Member of Lower Shihezi Formation in Sulige Gas-FieldH.J. Lu, T.W. Li, C.W. Xu and J.P. Wang 618The Study of Daqing Oilfield Class II Reservoirs Pore Throat Ratio Using ConventionalPressure Mercury MethodW.G. Ma, P. Wang and Y. Wang 622Simulation Experimental Study on the Permeability of Coal Rock in Deep MineG. Zhou, Y.B. Yu and W.M. Cheng 626The Performance Evaluation of Potassium Drilling Fluid SystemQ.W. Liu, S.S. Zhang, Z.Z. Fan, J.G. Wang and Y.M. Lou 635Processing on Red Mud by Integrated Dealkalized Sintering with MagnetizationY.G. Fang and Y. Qian 640An Experimental Study on Fracture Conductivity Influenced by Sulfur DepositionY.K. Fu, Z.P. Li, F.P. Lai, B.S. Yang and C. Meng 644Practice of Fuzzy-Ball Drilling Fluid Technology in Qinping CBM Well 12-11-3H with SixBranch HolesJ.B. Cui, J.H. Zhang, Q.Z. Zhu and B.W. Chen 649The Performance Evaluation of Solid Free Completion FluidQ.W. Liu, S.S. Zhang, Z.Z. Fan, J.G. Wang and Y.M. Lou 653The Effect of Gas Distributor Settings on the Separation Characteristics of Air-DenseMedium Fluidized BedL.Y. Li, A.T. Dou, X.S. Zhu, D.H. Li and L.B. Wei 657Experimental Study on the Crushing Process of Granular LayerJ.C. Zhang and L.C. Wang 662Dehydration and Upgrading of Lignite with MicrowaveF.W. Xin, Z.Q. Xu, Y.N. Tu, W. Yang, X.Y. Han and P.F. Geng 667Steam Injection Performance of Horizontal Wells Completed with Slotted LinersH.J. Chen, M.Z. Li, Y.Y. Zhang and W.W. Li 674Domestic and International Present Status and Utilization of Hafnium ResourceY. Bo, X. Liu, Y.G. Li and Z.Y. Cai 679Numerical Simulation of the Effect of Cathode Materials on the Displacement in a 350 KAAluminum Reduction CellW. Wang, S.C. Wang and P.F. Bao 685

Chapter 9: Materials Processing Technology

Microstructure and Mechanical Property Analysis of the Metal Part by SLMQ. Qin and G.X. Chen 693Experimental Investigation on Surface Topography for PTMCs during High SpeedGrindingJ. He, W.F. Ding, Q. Miao, B. Zhao, Z.W. Liu and Y.M. Liang 699The Structure and Mechanical Properties of Me/MeN/TiAlN Trilaminar CoatingsDeposited by a Hybrid PVD Coating TechniqueG. Xian, H.B. Zhao, H.Y. Fan and H. Du 704The Protective Effect of the Intumescent Coating on the Fire Resistance Performance ofCableJ. Wang, W.H. Song, Z.J. Shu and M. Zhang 714Effect of Grain Growth Inhibitor on the Wear of Ultrafine Cemented Carbide CuttingInsertsJ.B. Cheng, S.Q. Pang, X.B. Wang and Q.X. Yu 720Effect of Low-Voltage Pulsed Magnetic Field on Solidified Structure of Superalloy K4169X.H. Xie, Q. Zhou, C.B. Xiao and X. Tang 725Evaluation for the Light Transmission Property of Solar GlassY.G. Han and H.B. Chen 730

Chapter 9: Materials Processing Technology

Applied Mechanics and Materials Vols. 423-426 g

A New Stretch-Forming Process Based on Loading at Discrete Points and its NumericalInvestigationZ.Y. Cai, M. Wang and C.J. Che 737Modeling and Prediction Research on End Mills Wear in Micro Turn-Milling ProcessX.Y. Su, Z.J. Zhang, X. Jin and Y.J. Deng 741Calculation of Moisture Content and Drying Rate during Microwave DryingS. Khani Moghanaki, B. Khoshandam and M.H. Mirhaj 746The Experimental Study of Organizational Structure of Welded Joint and CombiningPerformance of Laser Welding of Vacuum GlassW. Liu, R.H. Zhang and H. Miao 750Effect of RF Negative Bias on the Structure and Performance of Diamond-Like CarbonFilms in ECR PlasmaL.J. Sang, Q. Chen, Z.W. Liu and Z.D. Wang 756Precision Measurement for Drill Helical Flute CurveY.P. Peng, B. Bai, Q.H. Sun, W. Zhang and F.B. He 762Determination of Elements in Carbon Fiber Using Inductively Coupled Plasma MassSpectrometry (ICP-MS)T. Zhao, M.Q. Zhou, W.L. Liu, W. Huang, J.Z. He, H.T. Chi and X. Gao 767Failure Analysis and Remanufacturing of Construction Machinery Shafts by HVOFTechniqueN. Ma, H.T. Wu, F.X. Ye and G.S. Zhang 771Model Adaptive Learning in Process Control of Strip Cold RollingJ.L. Bai, X. Li and J.S. Wang 775Effect of Laser Fluence on the Growth of Mo Films Prepared by a Pulsed Laser DepositionMethodJ.H. Lei 780Welding Technology Research for the Train BogieG. Wang and Z.G. Chen 784Temperature Distribution Analysis of TIG Welding Process of Thin-Walled Stainless Steeland Red CopperH.W. Liu, L. Huang, W.Z. Yu and R.B. Ma 788Investigating the Use of Nanoscale Bilayers Assembly on Stainless Steel Plate for SurfaceHydrophobic Modification and CondensationS.C. Wu, D. Wang, S.J. Lin, C.Y. Chung and Y.M. Chen 792Experimental Study on Friction and Wear Behaviors of Carbon Rubbing against CopperMaterial under Electric CurrentT. Ding, W.J. Xuan, Y.M. Li and S.F. Xiao 797A Study of the Hot Cutting Technology to EPS Architectural ModelX.J. Wu, F.R. Xu and J.G. Shao 801Research on Powder Stream of Coaxial Powder Feeding in Laser ManufacturingTechnologyH. Quan, Y.S. Wang, L.F. Liu, S.J. Liu and Q.R. Meng 807Study on Processing Technique in Engineering Tests of Mg-7.1Gd-4.6Y-1.3Nd-0.5Zr AlloyY.J. Li and K. Zhang 811Research on Coating Techniques of Locomotive SpringY. Xie and C. Sun 816Forward Slip and Backward Slip in Radial Ring Rolling ProcessY. Liu, Q. Wang and D.M. Cai 820Microstructure and Microhardness Changes of 30CrMnSiA Steel Modified Surface Layersby Electrolyte-Plasma ProcessingM. Skakov, E. Batyrbekov, L. Zhurerova and M. Scheffler 824Research on Modeling and Simulation of Linearity Controlling in Gun Drill MachiningS.Q. Chen, Y.M. Li, P.K. Bai and X.Q. Shen 828Selective Laser Melting Bone-Compatible Pure Titanium Porous StructureZ.F. Li, C.Y. Zhang, L.J. Qi and X.T. Sun 833The Preparation and Application of Special Performance Ornamental Alloy Coating onPlastic SubstrateN.J. Li, N.W. Li, M.M. Li and D. Yi 837

h Applied Materials and Technologies for Modern Manufacturing

Arrangement Characteristics and Wear Distribution of Wire Rope in Parallel GroovedMulti-Layer WindingZ.H. Hu, Y. Hu and J.Q. Hu 842Effects of Annealing and Different Substrate Materials on Ohmic Contact Property ofIGZO FilmsJ.F. Shi 846Detecting Cold Weld Defects in HDPE Piping Thermal Fusion Welds Based on MicrowaveTechniqueJ.P. Pan, X.W. Zhu and L.J. Tan 852Analysis of Low Molecular Weight Components in Disposable Food Contact MaterialsH.T. Chi, W.L. Liu, G.H. Hu, X. Gao, T. Zhao and M.Q. Zhou 857Preparation and Properties of Water-Borne Inorganic Zinc-Rich Coating in HydraulicEngineering Metal StructuresL. Liu, L. Chen, Z.Q. Wang, Z. Li, S.F. Wang and H. Li 861Analysis of Interaction between HTHP Completion Packer's Slip and the Casing WallM.J. Cai, Y.P. Cao, X. Wang and Y.H. Dou 866Methodology of the Experiment for Determination of Parameter Ra for the Methods ofFinishing MachiningR. Bartoš and A. Görög 871Resistance Spot Welding of Advanced High Strength TWIP SteelsP.R. Spena, M. De Maddis, F. Lombardi and F. D’Aiuto 876Mathematical Model for Heat Transfer Simulation of Rotary Alumina KilnX.Y. Yang, Y.G. Xiao and X.M. Lei 881Fabrication of Functionally Gradient Ultrafine-Grained WC-Co CompositesY.G. Yuan, J.J. Ding, Y.K. Wang and W.Q. Sun 885Preparation and Dielectric Properties of La Doped Bi2Al4O9X.Y. Zhang, X.W. Qi, J.F. Wei, W.S. Hu, G.F. Sun, R.X. Zhong and H.H. Chen 890Behaviors of Immersion Flow in Micro-Gap with Moving BoundaryH. Chen and H. Du 894Improvement for Bearing Ring Grinding Process Based on Six Sigma MethodsM.Y. Guo and H.L. Lou 898Energy Loss on High-Temperature Plasma Processing Waste Printed Circuit BoardsS.B. Wang, C.M. Cheng, W. Lan, R.W. Zhou, X.H. Zhang, D.P. Liu and S. Yang 904Acoustic Emission Characteristics of Sericite Schist Coarse Aggregates under ConsolidatedUndrained Triaxial TestsL.Q. Yang, S.L. Qin, H. Gao and S.X. Chen 909Research on Landscape Limestone Damage and Deformation under Uniaxial CompressionBased on Acoustic EmissionY.Q. Xiao, Y.P. Wan and B.X. Liu 914Study on Friction and Wear Properties of Water Lubricated Rubber BearingM.Y. Liao, B. Xin and Q.B. Li 920ECM Parameters Modeling and Optimization Using WSGAT.M.C. Jegan, D. Ravindran and M.D. Anand 925Numerical Simulation on Upsetting Process of Large ForgingsJ. Meng, Q. Wang and D.M. Cai 931Molecular Dynamics Simulations on Melting of AluminumJ.F. Li, X.P. Zhao and J. Liu 935Microstructure and Tribological Properties of Stellite21 Coating by Electro-SparkDepositionQ.F. Jing, Y.F. Tan, H.Y. Ji, X.L. Wang, L. Gao and W. Zhao 939Dynamic Response Analysis of Butt Joint of HTS-A Steel Considering Welding ResidualStressesW. Shen, R.J. Yan, L. Xu, K. Qin, X.Y. Zhang and L.M. Geng 944Performance Control Research of Oil Distribution Plate Parts by Laser Direct RapidForming Based on the Ultrasonic VibrationJ.B. Wang and Q.S. Zeng 951A New Method Designed Crimping Technical Parameter Using Response SurfaceMethodologyL.F. Fan, Y. Gao, J.X. Yan and J.B. Yun 955

Applied Mechanics and Materials Vols. 423-426 i

Experiments of Rock Cutting with Nano-Cemented CarbideJ.C. Kuai 962Study on a New Forming Method of the Honeycomb Semi-Cell StructuresL. Qin, H.L. Zhang and C.J. Luo 966Optimization Study on the Tooth Profile of Gear Shaping Roller of Honeycomb Semi-CellStructuresL. Qin, Y.T. Ma and C.J. Luo 972Effects of Air Bending Parameters on Spingback Using Finite Element AnalysisX. Li 978

Chapter 10: Building Materials

Utilization of Phosphorus Slag and Fly Ash for the Preparation of Ready-Mixed MortarX.W. Liu, L. Yang and B. Zhang 987Application of Environmental Protection and Safety Bituminous Mixture in TunnelX.R. Wu, N.X. Zhen, Z.H. Cong and G.Q. Sun 993The Effects of Temperature on the Stiffness Modulus of Dense Graded Asphalt MixturesA.M. Abudullahi, K.Y. Ting, W.K. Choong and B.H. Goh 997Compactability Analysis of Soil-Rock MixtureL.P. Yu and Z.Y. Wang 1001Elastic Modulus of Concrete Cast with Recycled AggregatesW.K. Choong, T.L. Lau, C.S. Sin and B.H. Goh 1006Effects of Recycled Aggregates on Water-Cement Ratio for ConcreteW.K. Choong, T.L. Lau, C.S. Sin and A. Ali Mohamed 1010Using Red Mud Manufacturing Building Glass-CeramicsC.S. Hu and X. Wang 1014Effect of Dosage and Modulus of Water Glass on AC Impedance Properties of Alkali-Activated Slag Cement MortarF.Q. He and X.P. An 1018Modification Research on the Water-Resistance of Magnesium Oxychloride CementZ.Y. Yuan, X.L. Liu, Y.F. Jia, P. Liu and M.C. Li 1027Experimental Research on Peridotite Concrete for Neutron ShieldingJ.J. Wang, G.F. Li and D.C. Meng 1031Study on Carbonization Test of Manufactured Sand ConcreteD.Z. Xu, G.H. Li, Z.Z. Liao and H.W. Yan 1036Applicable Fine Stream Sediments from Upper Chi River Produced Fired Clay BricksS. Promkotra 1041Synthesis and Property of Nano-SiO2/Silicone-Acrylate Emulsion Composite Coatings forConcrete Surface ProtectionL.M. Liao, H. Liang, L. Chen, Z.Q. Wang and S.F. Wang 1046Study about Characteristics of Cement Paste on Fractal TheoryT.Y. Zhai 1051Analysis of Displacement Field of Asphalt Mixture in Uniaxial Compression TestJ.X. Xu 1055Research on Failure Criterion of Concrete under Multi-Axial StressG.J. Liu and Z.L. Wei 1059Research on Fatigue Performance of Modified Asphalt Mixture in Intermediate Course ofPavementZ.H. Sun, X.H. Wang, G.Q. Zhu, P.D. Ou and J. Ma 1063Research on Concrete Strength Theory Based on Strain SpaceG.J. Liu and Z.L. Wei 1068Study Strength of Recycled Concrete Mix DesignX.H. Zhang, S. Tian, H.R. Dai, W. Lin, Z.C. Yao, Y.B. Wang, Q.Y. Kong and J.W. Zhu 1072Deterioration of Cement Pastes Containing Limestone Powder with Different FinenessExposed to Sulfate Environment at Low TemperatureF.C. Zhang, R.Y. Tang and Y. Zhao 1076

j Applied Materials and Technologies for Modern Manufacturing

Analysis about the Properties Impact of the Recycled Aggregate which were Caused byDifferent Produced Methods and Original ConcreteM.X. Dai, X.E. Zhu and X.J. Chen 1081Effect of Polycarboxylicacid Plasticizer on Characteristics of α-Calcium SulfateHemihydrateX.F. Liu, J.H. Peng, J.X. Zhang, M.Z. Chen and Q. Dong 1085Production Quality Control of Moderate Heat Portland Cement and Analysis of ApplicationEffect in Roller Compacted ConcreteY.M. Yang, J.L. Cai and Z.P. Chen 1090Effect of Age on Strength of Unfired Soil Lime Bricks Containing Non Uniform CoconutFibersH.R. Purnomo, R.G.R. Basmara Putra, R.M. Syaifulloh and I. Sulistyawan 1096Effect of Copper Slag on Properties and Structure of Cement and ConcreteJ.W. Song 1101Chaotic Characteristic Analysis of Concrete Fracture System Based on Lyapunov ExponentStability CriterionJ.W. Song 1105Dynamic Modulus Characteristic of Large Stone Permeable Asphalt MixturesJ.C. Wei and J. Li 1110Experimental Research on the Flexural Failure Properties of Green High PerformanceFiber Reinforced Cementitious Composites (GHPFRCC)X.L. Li, M. Luo and J. Wang 1114

Chapter 11: Construction Technologies

Dynamic Analysis of Large Dams in Frequency-Domain Based on Fourier SEMP. Tan and N.S. Li 1121Establishing and Checking the Temperature and Humidity Coupled Model about AsphaltPavement StructureB. Wang 1126A Review of Durability Research of Concrete BridgeJ.M. Bian, Q. Bai, Y.M. Kang and J. Zhang 1132Study on Green Construction Evaluation Based on the Fuzzy Matter-ElementB.L. Shao, M.M. Yang and B.Q. Liu 1137LS-SVM-Markov Model for Dam Deformation PredictionY.Z. Jiang, H.Z. Liu and J.Y. Liu 1144Study on Probability Distribution of Ship-Bridge Collision Force FormulaJ.H. Shao and S. Song 1150Earthquake Damage Investigation and Analysis of Masonry Structure in Yuxi Village - TheMacroscopic Epicenter of Ms 7.0 Lushan EarthquakeP.L. Yan, B.T. Sun and M.Z. Wang 1155Research on the Formula of Polyaspartic Ester Polyurea Concrete Coating and itsApplicationJ. Feng, L.M. Liao, L. Chen, C.J. Xiao, S.F. Wang and H. Li 1159Axial Compression Bearing Capacity Calculation of Hoop Reinforcement Concrete ColumnJ. Tang, L. Wu and N. Xiong 1164Study on the Scope of Application of Cement Deep Mixing Pile to Consolidate Soft SoilsX.H. Guo, G.D. Wu and X.H. Guo 1169The Case Analysis of Building Collapse during the Decoration ProcessF. Yang, S. Jiang and Y.F. Zhou 1173Exquisite Representation in Peter Zumthor's WorksJ.J. Jia and S.F. Liu 1178Peter Zumthor Ideas of Architectural CreationJ.J. Jia, S.F. Liu and X.J. He 1183Study on Elastic-Plastic Damage Constitutive Model of Frozen Soil Based on EnergyDissipation TheoryZ.M. Li, T. Liu and Z.L. Cui 1187

Applied Mechanics and Materials Vols. 423-426 k

Crack Detection and Analysis of Long-Span Continuous Rigid Frame BridgesK. Liu, B. Wu and Y. Yuan 1193Experimental Research on Compaction Standard of Subgrade for Low Liquid Limit Silt inShanxi AreaX.R. Wu and J.M. Shen 1198The Construction of the SGW-Based Bar-Beam ElementsY.X. Liu, H.X. Wang, Q.Q. Fu, X.X. Yang and G.D. Ding 1202Analysis of the Plastic Extension of Parking Cracks on Casing after TestingL.C. Huang, S.K. Tong, Y.P. Cao and Y.H. Dou 1207Fundamental Study of the Potential Application of Steel Fiber Reinforced Concrete toEnhance the Impact Resistance of Nuclear Power Plant StructuresH.W. Cho, J.H. Moon and J.H. Lee 1211Dynamic Simulation of Ballastless Railway Track System with Local Invalid SleepersH.L. Zhu, Y.D. Fang and L.F. Yu 1217A Study of New Type of Earthquake-Resistant and Crack-Resistant BlockJ.J. Zhang, N. Xu and M.H. Zhong 1221Analysis of Shape Control Factors for the Overall Optimization Design of High-Rise FrameShear Wall StructureT.Y. Mei and L. Wu 1226Key Points Analysis for Seismic Design of Super High-Rise BuildingT.Y. Mei and L. Wu 1230Analysis of the Mechanical Properties of Cement Silo StructureH. Gan and Y.Z. Yang 1234The Time Domain Simulation of Non-Stationary Road RoughnessH. Wang and X.M. Shi 1238Geometry Optimization and Engineering Applications of Transmission Tower Foundationin the SlopeB. Peng, X.Y. Wang, Y. Wang and H. Huang 1243A Numerical Study of the Impact of Tunnel Depth on Surface Displacement in ShieldTunnel ConstructionH.T. Zhan, H. Yuan, J.Y. Wu and Y.S. Yuan 1248The Application of the Creep Model in the High-Speed Railway Subgrade SettlementPrediction TechniquesJ. Li, S.X. Chen and F. Yu 1253Study on Fatigue Features of Box-Shaped Cable-Girder Anchorage for Cable-StayedBridges with Steel Box Girders by Model TestQ.H. Zhang, C. Cui, Q. Li and B. Bai 1259Simulation for Wind Pressure of Pedestrian Bridge Induced by Main Line TrainL. Jiang, J. Liu, S.J. Li, B.F. Ji and Y.F. Du 1268Research and Application of Building Enclosing Structure Used in Equipment NoiseControlN. Xu 1272The Application of Fiber Cement Slurry Used to Prevent and Block LeakJ.J. Guo, S.S. Zhang, Z.Z. Fan, Q.W. Liu and J.G. Wang 1279Effects of Stacking Sequence on the Dynamic Characteristics of Hybrid SandwichComposites PlatesX.F. Ma, F.L. Huo and G.L. Zhang 1283Analysis of the Influence of Anisotropy on Seepage FieldJ.B. She, Y.Q. Tang and Y. Chen 1287Numerical Simulation for Uplift Bearing Capacity and Affecting Factors of the DiggingPiles in Slope GroundX.Y. Wang, B. Peng, X.C. Tang and L. Fan 1292Study on the Friction Transfer Rule of Piles in the Slope under the Vertical LoadX.Y. Wang, B. Peng, X.C. Tang and L. Fan 1296Experimental Research on Shrinkage Properties of Cement Stabilized Iron Tailings SandMixtureB.F. Pan, H.Y. Shi and C.H. Zhou 1301The Practical Probability Analysis Methods for Stability of LandslideQ.H. Song, X.L. Li, Y.Y. Li and Y. Wu 1308

l Applied Materials and Technologies for Modern Manufacturing

Study on Damage Characteristics of Reinforced Concrete Structure for Internal ExplosionY.D. Yang, X.D. Li and X.M. Wang 1312An Inductive Method for Soil MechanicsH.F. Qin and Y.K. Liu 1317Stability Analysis of Jointed Rock Slope Using Shear Strength Reduction ApproachL.J. Cao, Y.N. Liu and Z.C. Shangguan 1321Submarine Slope Stability Evaluation Based on Strength Reduction Finite Element MethodJ.F. Cao, X.J. Jin, J.G. Li and G.H. Hu 1325Seepage Numerical Simulation Methods of Hard Fractured Rock MassG. Lei 1330Study on the Effects of Microwave Pretreatment on the Fire Retardant Permeability ofFast-Growing WoodJ. Zhang, S.F. Yuan, K.H. Wang and Q. Li 1334The Effect of Alkali Treatment on Wood Crystalline Structure and Micro-Structural ModelZ.H. Xue, Y.H. Xie and H.Z. Zhu 1339Calibration of SWAN Model for Wave Simulation in Bohai SeaX.C. Lv, D.S. Wang, D.K. Yuan and J.H. Tao 1344Numerical Simulation Analysis on Interaction among Underground Structure, ShearConnectors and Retaining PilesX. Yu and M.X. Luo 1351

Chapter 12: Environmental Engineering and Land Planning

Qualitative and Quantitative Integrity Evaluation of HPHT Gas well Containing Sour GasY. Wang, W.K. Li and J. Li 1359Research on Coagulation/Sedimentation Process for Fluoride Removal in SimulationWastewaterL.Z. Zhai, Y.H. Sun, T. Wang and C. He 1365Establishment of Ecological Security Pattern for Suzhou National New & Hi-TechIndustrial Development ZoneY.H. Li, B. Xiang and Y. Hu 1371Exploring the Relationship between Industrial Economic Growth and EnvironmentalPollution - An Empirical Analysis Based on Cointegration and Granger Causality TestC. Wang, J. Liu, L. Huang and W. Li 1377Development of Rainwater Purification and Reclaimed Water Treatment Systems Using aHigh-Efficiency Air-Cooled Ozone GeneratorS.A. Ha, I.S. Kim, K.S. Son and J.P. Wang 1383Derivation of Optimum Treatment Conditions per Heavy Metal Contamination forElectrical Membrane and Convergent Process Apparatus in Electromagnetic FieldS.A. Ha, G.S. Han, B.H. Jung, K.H. Kim and J.P. Wang 1388Numerical Modeling of Oil Spill with Tidal and Wind-Driven Coupled Model in Bohai BayM.C. Li, G.Y. Zhang, Q. Si, S.X. Liang and Z.C. Sun 1394Study on Spatial Characteristic in Micro Level of Rural-Urban Construction LandExpansion Based on the GWR Model - A Case Study in Tonglu County of ZhejiangProvinceD. Cai and Y.M. Chen 1398A Novel Integrated Rainfall-Runoff Model Based on TOPMODEL and Artificial NeuralNetworkS. Liu, J.W. Xu, J.F. Zhao and Y. Li 1405Comparative Study on the Drying Process and Fractal Dimension of Sewage Sledge:Microwave and Air-BlastT.Y. Zhai and L. Fang 1409Adsorption of Fluoride Ions from Drinking Water Using Glass Derived PorousHydroxyapatite ScaffoldsD.L. Gu and W. Liang 1413Applicability of Modified TOPMODEL in the Arid Zone and the Humid ZoneS. Liu, J.W. Xu, J.F. Zhao and P. Hou 1418

Applied Mechanics and Materials Vols. 423-426 m

Geochemical Speciation Associated to Brine and GroundwaterS. Promkotra and T. Kangsadan 1422

Chapter 13: The Basic of Mechanics and Research Methods

Stress Simulation Analysis of Bundling Wire Based on ANSYSM. Dai, L.F. Diao, X. Zhang and L.B. Chen 1429Thermodynamics Coupling Analysis of Grid-Controlled Electron GunF.F. Song, S. Xu and Y.F. En 1433Exact Solution of Stress and Radial Displacement of Elastic Tapered Interference FitL. Xiong, P. Shang and Y.L. Xu 1438Pressurizer Modeling: Using Different Thermodynamic Models and Comparing Resultswith RELAP Code ResultsS. Khani Moghanaki and M. Rahgoshay 1444Studies on Several Problems of Rotary ImpactL. Wang 1449Internal Force Evaluation of Non-Uniform Beam in Portal FrameW.W. Jia and D.F. Wang 1454Research on the Motion Mechanism of Offset Press's Ink RollerH.Y. Chu, J.T. Zhao and L.G. Cai 1459Study on Hydraulic Fracturing Affected by Horizontal Principal StressB. Huang, T.H. Ma, A.S. Li, J.Q. Sun and L.Y. Zhang 1467

Chapter 13: The Basic of Mechanics and Research Methods

Dual Variables System Analysis for Timoshenko BeamS.W. Guo 1473

Chapter 14: Dynamics, Vibration and Noise

The Effect of Nonlinear Isolator on Diesel Engine Vibration Isolation SystemY.C. Song, Z.Q. He and Z.Z. Li 1487Analysis of the Dynamic Characteristics of the Feeding Stage with Different GuidewaySystemsJ.P. Hung, G.N. Kuo and T.L. Luo 1492Asymptotic Behavior of a Chemostat Model with Watt Type Functional Response andVariable YieldQ.L. Dong and M.J. Sun 1496Hermetically Metal Sealing Random Vibration Damage Mechanism and Fatigue LifePredictionT. Han, X.Q. He and Y.F. En 1501Analysis to Earthquake Resistant Behavior of Composite Steel Plate Shear Wall Based onABAQUS SoftwareD.J. Yang and Z. Chen 1506Random Vibration Analysis of Grid-Controlled Electron Gun in High Power TWTS. Xu, K.J. Chen and F.F. Song 1511Parametric Design and Modal Analysis on Four-Order Elliptical GearZ.D. Huang, A.M. Hui, G. Yang and R.Y. Li 1516The Analysis of the Flutter Region of Wind Turbine BladeH. Wang, B. Ma and J.J. Ding 1520Research Modal Analysis Method of MW Wind TurbinesY.S. Luo, M.Q. Zhou, W.J. Liu, Q. Chen and S.B. Wang 1524Theoretical Analysis of Seismic Response for Marine Drilling RisersJ.Q. Li, Y.F. Li and Y. Peng 1531Influence of Axis Curvature Radius on New Annular MEFPT. Zhou, Z.H. Du and L.L. Song 1537

n Applied Materials and Technologies for Modern Manufacturing

Random Response Analysis of Vibration Transfer Path Systems with Translational andRotational MotionsW. Zhao, N. Zhou and Y.M. Zhang 1543Dynamic Performance Analysis of Steel Truss BridgeS.S. Wang, T. Xu, S.F. Qin and Y.J. Zhang 1548Research Overview of Full Aero-Engine Dynamic Response Caused by Blade-OffD. Ye, H.J. Xuan and L.L. Liu 1552Monitoring and Analysis of Historic Building Vibration Influenced by Blasting in ComplexUrban EnvironmentJ. Ma, L.F. Luan, X.H. Li, J.G. Wang and Q.H. Li 1558Statistical Energy Analysis of Subway Wheel/Track NoiseX.F. Zhang, Y.G. Xiao, Y. Shi and W.Y. Zeng 1563Analysis of Damping Force Changing with Temperature for Self-Feedback-FrictionDamperH.Y. Liu, D. Zhao, L.J. Sun and M. Zhang 1567Experimental Research on the Levitation Support Way of Ultrasonic Thrust BearingY.G. Song, Z.Q. Fan, X.D. Sun, L.L. Wang, F.J. Tian, H. Cai, X.L. Wang, H.L. Yang and A.J.Quan 1571Dynamic Response Analysis of Start-Up Transient in Air Conditioning SystemP. Surawattanawan and S. Polpun 1577Random Response Analysis of a Large-Size Cooling Tower Subjected to the StationaryEarthquake MotionJ.N. Zhu, Y.Z. Xu, G.L. Bai and R.W. Li 1589Dynamic Properties of Machine Bolted Joints SummaryW.W. An, Z.R. Gong and T. Zhao 1594Experimental Study on the Performance of the Laminated Steel IsolatorsY.G. Xie, P. He, X.Q. Qu and H.B. Cui 1603

Chapter 15: Solid Mechanics

Modeling and Simulation of Horizontal Single Head Screw Conveyor with Different FillLevels and Rotational Speed Based on EDEML. Mei, J.Q. Hu, Y.Z. Li and G.B. Yang 1611An Application of the Maximum Shear Strain Increment in Searching Sliding SurfacesL.Y. Cheng, J. Li, S.X. Chen and X.J. Chu 1618The Damage Mechanics Model of the Wellbore Surrounding Rock Based on Fractal TheoryR.X. Shi, C. Ai, W.C. Zhao and X.H. Feng 1623Boundary Element Method for Crack Analysis in Two-Dimension Anisotropic SolidC.X. Liu 1627The Influence Area of a Supersonically Expanding Spherical InclusionX.J. Su and S.R. Huang 1632Mechanical Component Reliability Calculation through Multi-Plane Combination MethodH.T. Lu and Y.G. Dong 1636The Scattering Waves by Two Spheres in SolidY.R. Zhang and P.J. Wei 1640Further Study on the Net Shear Strain Energy Density TheoryS.Y. Xue 1644Research on Dynamic Compression-Shear Behavior of Closed-Cell Aluminum FoamJ.R. Lu, J. Zhang, X.L. Sun and X.H. Cai 1648Improved Transfer Matrix Method in Analysis of Cylindrical Shell with Partially CoveredConstrained Layer DampingH.C. Wan, Y.N. Li and L. Zheng 1655Nonlinear Response and Fatigue Life of Thin Plates Subjected to Non-UniformTemperature Distributions and Acoustic ExcitationsY.D. Sha, L. Zhu, G.Z. Zhang and X.C. Luan 1659Equilibrium of a Thick-Walled Sphere of Inhomogeneous Nonlinear-Elastic MaterialV.I. Andreev 1670

Applied Mechanics and Materials Vols. 423-426 o

Chapter 16: Fluid Mechanics

Analysis and Simulation of the Fluid Field in Thermal Water-Jet Nozzle Based on ANSYSFLUENT & ICEM CFDJ.Z. Zhou, X.P. Xu, W.J. Chu, Z.C. Zhu, Y.H. Chen and S.W. Lai 1677A Survey of Fluidic Thrust Vectoring Nozzle by Numerical AnalysisL. Li, Z.H. Shi and T. Saito 1685Static Force Measurement Technology Wind Tunnel TestD. Jin, Y.M. Yang, J. Wu, L.M. Song and S. Li 1689Application of Conjugate Heat Transfer in Multidisciplinary Design Optimization ofInternal-Cooled Turbine BladeS.Z. Xu, X.J. Fang and Z. Yin 1693Numerical Simulation of Cross-Flow around Four Square Cylinders in a SquareConfiguration at Low Reynolds NumberW. Zhang, W.J. Li, H.H. Ye and D.X. Zhang 1700Aerodynamic Analysis of Inflatable Membrane AeroshellJ.Z. Wei, R.Q. Ma, H.F. Tan and W.T. Zhang 1705Numerical Simulation of Boiling Flow in LNG Releasing Underwater ProcessB. Zhang, J.W. Zhang, W.Q. Wu and G.F. Yu 1711Water Coning Simulation Mode in Fractured Gas Reservoir with Bottom WaterX.H. Huang, W.Y. Zhu and Y. Lou 1716The Research of the Seepage Regularity of Power-Law Fluid under Porosity ScaleE.L. Yang, Y.X. Gao and D.L. Li 1722Calculation of Regular Longitudinal Wave Force in MMG Model Based on CFDL.J. Yang and Y.H. Tao 1727Study on Water Spraying System in Wet Electrostatic PrecipitatorL.C. Xiao, Z.J. Ding and Q. Li 1732Application of Particle Finite Element Method in Axially Symmetric Fluid-StructureInteraction ProblemsY.F. Gao, X.Y. Zhang and N. Liu 1737Buoyancy-Induced Convection in a Square Enclosure Discretely Heated at One Side andCooled either at the Top or at the Bottom Using both Gases and Liquids as Working FluidsM. Cianfrini, R. de Lieto Vollaro, A. Quintino and M. Corcione 1741Numerical Simulation of Rayleigh-Taylor Instability with Large Density Ratios Based onRKDG MethodJ.W. Tian and X.J. Yuan 1751On the Treatment of Neumann Boundary Conditions in Collocation-Based MeshlessMethodsX.D. Zhang, L. Wang and D.W. Teng 1757Numerical Simulation of Flow Characteristic in Microchannel between Parallel Flat PlatesY.Q. Pan, P. Lu, L. Yu, X.M. Han, F.Q. Gong, W.F. Liu and F.T. Sang 1763

Chapter 17: Biomechanics

Feasibility Analysis of Laboratory Emulation Study on In-Run Phase of Freestyle SkiingAerial AthletesX. Wang, Y. Ma and Y.M. Fu 1771Analysis of Risk Factors for Military Parachuting Injuries among Chinese Air Force CadetPilotsW.J. Guo, Y.R. Chen, Y.B. Yang, G.F. Qu, D.Y. Liu and Q.Y. Dong 1778Biomechanical Response of Upper Limb Fracture in Real-World Truck-to-PedestrianAccident Using THUMS (Version 4.0)K. Li, S.X. Liu, F.P. Wang, S. Su and Z.Y. Yin 1782Picomol Assay of Nitric Oxide Screening in Biological Samples by Derivatization Combinedwith High-Throughput Microplate FormatX.L. Zhang and Q. Yang 1786

p Applied Materials and Technologies for Modern Manufacturing

Research on Negative Pressure Wall Climbing Absorption System Based on SMAF. Dai and G.H. Liao 1790The Correlation Research of Insects Song Sound Quality and Nano-MechanicalCharacteristicsJ. Xie, Z.Y. Chang, H.W. Wang and J. Liang 1794The Correlation of Crickets Rubbing Wings Nano-Mechanical Properties and its FrictionSound CharacteristicsJ. Xie, W. Han, H.W. Wang and Z.Y. Chang 1798

Chapter 18: Product Design and Innovative Design Methodology

Reconfiguration Modules Based Displacement Group PropagationL.P. Zhang, Z.Y. Jin, F.L. Bu, G.B. Pang and M.J. Zhou 1805Structural Synthesis of Spatial 4-Link Mechanisms for Coil WindingW.H. Hsieh and C.Y. Tseng 1809Structural Topology Optimization Method Based on Bone RemodelingK. Rahman, N. Helil, R. Imin and M. Geni 1813Research Progress of 3D Style Design Based on SketchingC.X. Xuan, Y.J. Gong and Q. Li 1819Joint Purchase Service System Research Based on User NeedsL.F. Zhang and S.S. Fang 1823Analysis of Young Women’s Lower Limb Shape Based on 3D Body MeasurementG.Y. Pan, X.L. Ye, J.N. Zhang, Y. Xie and F.Y. Zou 1827Technological Research on CPC Product Development Process Based on ExtenicsL. Lei and F.F. Yu 1831Manufacturability Analysis of Integrated Product Based on Feature MappingJ.P. Tian, D.P. Huang, L.D. Zhang, H.L. Yang and Y.C. Huang 1837The Electric Vehicles Developing in Taiwan-Application of Scenario AnalysisY.S. Hsueh 1842Cycling Comfort Levels for Recumbent Exercise BicyclesC.C. Yen, W.L. Wei and L. Tao 1847Research on Commercial Vehicle Clutch Release Bearing Fatigue Life Prediction ModelG.L. Chen and X.Y. Chen 1853Analysis of Process Parameters Influencing V-Bending Based on DynaformG.Y. Ma, B.B. Huang, S.B. Jiang and K. Chen 1858Resistance Spot Welding Gun System Development Based on C# and SolidworksX.L. Wen and X.L. Liu 1862Development of Parameterized Simulation and Analysis System for Cylindrical Gear Basedon VC++ and ANSYSS.B. Jiang, B.B. Huang, X.Y. Li and S.L. Jiang 1866The Research on Tool-Database Turning Stone Based on Pro/ToolkitX.J. Wang, M. Zhao and Y.F. Zhang 1870Tool Path Planning for NC System in Line Contact MachiningK.Q. Wang, J.Q. Fan, L. Liu and L. Xiong 1875Modeling and Simulation of Kinematics for Planar R-RRR-RRP Mechanism Based onAssur Rod Group TheoryX.Z. Dang, L.S. Zhou and D. Liang 1879Effect of Cracked Blade Distribution on Strength of Centrifugal ImpellerG. Cheng, J.F. Li, W.Q. Wang and J. Sun 1884Finite Element Analysis of the Spindle Box Structure of Large CNC Machine ToolM.W. Lu, C. Lu and X. Yang 1889Computer Simulation of Filling Process and Temperature Distribution of Oil Pump Coverin Solidification ProcessH.W. Liu, L.D. Huang, S.Q. Fan and B. Hu 1894CAD Model Reuse Based on the Integrate Design HistoryY.J. Wu, Q. Gao, G. Liu and X. Ji 1898

Applied Mechanics and Materials Vols. 423-426 q

Chapter 19: Design of Machinery and Mechanisms

The Method of the Residual Life Prediction of Pressure Vessel Defect Based on DefectFailure Rate Inflection PointC. Xu, W. Long, D.Q. Tian and S.J. Lin 1905Simulation Investigation on Multi-Unit Parallel-Flow Type Condenser with Flat TubesDistributionJ.R. Du, Z.Y. Zheng, J.H. Wan, Y.D. Wang, Z.M. Wan, Q. Guan and J. Liu 1910Sliding Sleeve Fracturing Strength Analysis of the Ball Based on Ansys WorkbenchX.F. Shang, Y. Wang and W.D. Deng 1914Design and Experiment on Flank Type of Cropland Plot Breeding Wheat Drying CarF. Dai, W.Y. Zhao, F.W. Zhang and Z.S. Han 1920Finite Element Analysis on Telescopic Suspension Arm of Dirt-Removing Crane Based onANSYSD.D. Liang 1924The Improved Design of Machine Tool Structure Based on Sensitivity AnalysisH.Q. Wu and W.Q. Wang 1929Structural Optimization for Upper Beam of Isothermal Hydraulic PressW. Wei 1936A Method to Reduce Calculation Time for a Study of a Damper Plate in a High Speed HardDisk Drive SimulationJ. Suriyawanakul and K. Tangchaichit 1940The Application of Slip Joint Use in Space Frame Structure for VehicleS.Y. Lee, T.H. Cheng and Y.T. Lin 1944Fabrication of Deep Tapered Perforation Using a Modified through-Mask ElectrochemicalMicromachiningP.M. Ming, Z.B. Lv, X.H. Bao, S.Q. Wang and S.Q. Liu 1948Research on SHCCT of Weather Resisting Plate for VehicleS.X. Zhang, X.J. Deng, S.J. Liu, M.Y. Wang and G.Q. Gou 1955The Processing Techniques of Common Guide Rod Used in Mines and its Jig DesignC.S. Yuan and Z.L. Hao 1963The Strength Analysis and Structure Optimization of Packer Slip Based on ANSYSZ.C. Lin 1967Practice and Analysis of Life Measuring Device for Motor ValveW.J. Ding 1972The Fuzzy Reliability Calculation for Cylinder Liner Wear Life of Internal CombustionEngineX.X. Liu and M. Chen 1978Design of Injection Mold for a Large LCD TV PanelJ.A. Zhou 1982The Design of Emergency Self-Rescued Helmet for the EarthquakeS. Shi, Y.Q. Li and P. Chen 1990Optimization Design of a New Safety Structure of Plate-Fin Heat Exchanger Using GeneticAlgorithmD.C. Guo and M. Liu 1996Research on Contact Strength between Roller Screw Pair on Hoisting Mechanism Appliedin Deep Sea CraneH. Wang, M.H. Tong and P. Zheng 2001Development of Electrolyte Vacuum Surface-Boiling Electrodeposition ApparatusP.M. Ming, W.X. Lv, J.Y. Shang, J.T. Wang and Q.L. Hao 2006Design of Autoclave Process Water Heat Recovery SystemH.L. Wei, P.Y. Wen and L.J. Shi 2010The Torque Research for Permanent Magnet Coupling Based on Ansoft Maxwell TransientAnalysisG.Y. Meng and Y.H. Niu 2014Study on the Z-Source Inverter with Low Voltage StressL.P. Zhong, Q.M. Gu and S.P. Zhang 2020

r Applied Materials and Technologies for Modern Manufacturing

Study on Different Connection Types of Air SpringH.X. Gao, M.R. Chi, M.H. Zhu and P.B. Wu 2026Analysis and Comparison of Seal Ability of Premium Tubing Connections under AxialAlternating LoadL.C. Huang, Y.P. Cao, Y. Yu and Y.H. Dou 2035Research on Bearing Characteristics of the Digging Foundation in Slopes Based onInterfaceB. Peng, Y.M. Shang, R.S. Tan and T. Mei 2040Study on the Recycling Machine of Plastic Film with Shovel-Excavation ScreeningY.C. Liu, J.M. Jian, Y.D. Chen and S.L. Hou 2045Numerical Simulation Study of the Impellers of the Centrifugal Pump Based on DifferentTurbulence ModelsA.H. Guo, Y.Z. Zeng and X.B. Liu 2049The Numerical Simulation Research of Disk-Type Molecular Pump Based on DSMCMethodB. Liu, D.C. Ba, L.H. Fan and L.N. Zhou 2054Modified MRAS Speed Controller for Direct Torque Controlled Sensorless InductionMotor DrivesH.P. Wang, Y.F. Chang and F.H. Liu 2059Design and Research of Wind Tunnel Test for Deflectable NoseB. Zhang, S.S. Wang, M.Y. Cao and Y.X. Xu 2063Plasticization of Trunk Lid and Molding Parameter OptimizationD.N. Yu, C.M. Shao, B.Y. Zhang, L. Han and L.Y. Zhou 2068Diode-Pumped Yb:YAG Thin Disk Laser with a Novel Multi-Pass Pump and CoolingArrangementQ.G. Song, G.H. Cheng and J.F. Zhu 2074Simulation and Analysis the Internal Flow Field of Control Valve Bonnet LeakageY.T. An, R.J. Ma and Y. Wang 2078Optimal Design of the Fluid System on Special Fuel Filling EquipmentC.C. Yang, W. Li, Y. Ye and G. Shen 2082Motion and Evaporation Characteristics of Ethanol Droplet in High Temperature NitrogenEnvironmentM.L. Mi and L. Liu 2087Thermal Simulation of Cooling Channels in Proton Exchange Membrane Fuel CellS.M. Sun, W. Liu and S. Yao 2091The Design of High Power LED HeadlampW.L. Chen, Z. An, C.Q. Xiang, C.Y. Liu and L. Hao 2098Diamagnetic Magnetization Strength as a Consequence of Electromagnetic Induction Law’sEffectT.N. Gnitetskaya and E.V. Karnauhova 2104Design of Micro Power Self-Generation DeviceS. Tang, K.X. Yang, W. Fang and B. Cai 2108The Applied Research of the Super Capacitor in the Maximum Power Tracking ofPhotovoltaic SystemsY.B. Guo and X. Ren 2112A New Fatigue Life Calculation Method Based on Non-Linear Cumulative Damage TheoryF.H. Cai, X. Wang and F.L. Zhao 2116Modeling and Real-Time Simulation on Doubly Fed Induction Wind GeneratorD. Tian, H.H. Song and W.L. Wang 2123Dynamic Characteristics of a Horizontal Milling Machine with Hybrid Guideway SystemsJ.P. Hung, W.C. Lin, T.L. Luo and Y.S. Lai 2127Evaluation of Sphericity Error Using Differential Evolution MethodY.P. Chen, L. Jin, S.P. Li, S.L. Song and Y. Liang 2132

Chapter 20: Industrial Engineering and Production OperationsManagement

Applied Mechanics and Materials Vols. 423-426 s

Capacity Buffer Design for Critical Equipment Caused by Unexpected Production MissionY. Liu, J.J. Hao and H.B. Ying 2139On the Modern Service Industry to Separat from the Manufacturing Industry in HebeiProvinceB.F. Liu, S. Xu and X.L. Ma 2145The Construction Safety Accident Emergency Decision Support System Based on Ontologyand CBRY.L. Zhu 2149Customer Value Assessment towards Transport Modes of Tourism after a Natural Disasterof Scenic Spots - The Analysis Based on Choice ExperimentJ. Liu, W. Li and L. Huang 2154A Study of Environmental Risk Comparison Based on Set Pair Analysis TheoryL. Wang, Z.Q. Ma, S.P. Yu and J.H. Zhu 2161Research on Capacity-Constrained Manufacturing/Remanufacturing Hybrid System withOutsourcingY. Zhou and M.R. Deng 2166Supply Chain Modeling Based on Multi-AGENT ResearchL.L. Jiang and X. He 2170Performance Evaluation of Green Supply Chain Based on Catastrophe Progression MethodH. Dong and S. Dong 2174A Heuristic Algorithm for Integrated Surplus Inventory Matching Problem in SteelEnterprisesC.T. Shi, T. Li and Y.Z. Liu 2178A Modified Genetic Algorithm for Total Processing Time Minimization in theManufacturing Process Planning ProblemC.T. Shi, Q.Y. Liu and Y.Z. Liu 2184An Evolutionary Game Model of the Establishment of Tracebility System in Food SupplyChainS. Tang 2190Decision Making and Economic Analysis for Accelerated Bridge ConstructionZ.Z. Wang and B. Shi 2196Introducing Project-Based Learning to Design Enterprises for CreativityF. Wang, C.F. Zhou and H.B. Chen 2202Scheduling Problems with Human and Machine EffectsN. Yin and T.C. Sun 2206The Empirical Research about the Impact on the Accounting System Changes to EarningQuality - Taking Manufacturing of a-Shares as an ExampleJ. Li, B. Mei and S.F. Li 2211Dynamic Context-Aware System Based on Multi-Level Material Data Control ModelD.J. Xue and Y. Pan 2216Coordinated Joint Development of Manufacturing and Morden LogisticsH. He 2220Single-Machine Scheduling with Resource-Dependent Learning Effect and DeterioratingJobsY.P. Fan and C.L. Zhao 2224Material Data Integration Model Based on Context-Aware within ManufacturingEnterprisesD.J. Xue and Y. Pan 2228Modeling and Scheme Generation of Dynamic Flexible Job-Shop SchedulingY. Pan, D.J. Xue, T.Y. Gao, L.B. Zhou and X.Y. Xie 2232Research on Strategy of Dynamic Flexible Job-Shop SchedulingY. Pan, D.J. Xue, T.Y. Gao, L.B. Zhou and X.Y. Xie 2237Equilibrium and Non-Equilibrium Solution of Nonlinear Population Evolution SystemsJ.M. Wang 2244Industrial Process Measurement and Control Equipment Reliability Analysis Based onPhysics of FailureC.C. Wang, X.J. Liu and K. Mei 2249

t Applied Materials and Technologies for Modern Manufacturing

Chapter 20: Industrial Engineering and Production OperationsManagement

Innovation in Low Carbon Printing & PackagingZ.C. Qu 2257Research on Technology Integration Innovation Platform Performance EvaluationC.Q. Liu and G.P. Cheng 2261Study on Evaluation and Optimization of Major Scientific Research ProjectsX.M. Huang 2266The Impact of Recovery Strategies on Brand Trust after Production OperationsManagement FailureP.W. Cui, W. Li and Y. Yang 2270ATC Estimation Approach Applying Co-Evolutionary StrategyA.P. Chai 2275Application of Fuzzy Mathematics in Selection Air Flow Regulating ProgramW.W. Ye, X.P. Xie, M.W. Han, S.Y. Luo, Z. Li and Y.B. Wang 2291Study of Gas Emission Quantity Prediction Based on Chaotic Time SeriesG.H. Liao, Y.J. Tang and F. Dai 2297

Chapter 21: Sensor Technology

A Frequency Modulation GMI Magnetic Sensor Base on Inverter Multivibrator withLongitudinal ExcitationB. Yang, X.Z. Bu and X.J. Huang 2303Research on Temperature Compensation Method of Quartz Flexible AccelerometerS.L. Mu, F.B. Chen, J.M. Gao and Z.Z. Wu 2308A New Electrochemical Host-Guest Recognition Sensor for DNA DetectionL. Cheng, Y. Lin, C.H. Feng and H. Fan 2313Optimization of a Novel Micro-Hotplate for Gas SensorC.C. Li, X.B. Zhang and L. Liu 2317Experimental Research on Spiral Macrobend Loss of Multimode FibersR.D. Ni, X. Song, L.J. Qian, S.H. Wang and B. Buryar 2321A New Electrochemical Sensor for DNA Detection Based on Au Nanoparticles Surface-Modified with β-CyclodextrinsL. Cheng, C.H. Feng and H. Fan 2330An Improved Hall Vehicle Speed Sensor Detection SystemZ.K. Qin, S.Y. Li, C.W. Wang and Z.P. Ma 2334

Chapter 22: Technologies of Measuring, Testing and Monitoring, Dataand Signal Processing

Aeroengine Exhaust Gas Temperature Prediction Using Process Neural Network withTime-Varying Threshold FunctionsG. Ding, X.W. Wang and D. Lei 2341Health Condition Prognostics of Complex Equipment Based on Discrete Input ProcessNeural NetworksG. Ding, D. Lei and W. Yao 2347Aeroengine Exhausted Gas Temperature Prediction Using Process Extreme LearningMachineG. Ding, D. Lei and W. Yao 2355Study on the Intelligent Software Testing Systems for AxlesZ.H. Ma, S.L. Cai and F.F. Luo 2363Study on Sulfur Compounds in the GasolineS.J. Liu, H.N. Xu, K. Feng and Y. Wang 2367

Applied Mechanics and Materials Vols. 423-426 u

The Infrared Diagnostic Technology of Power Transmission Devices and ExperimentalStudyX.D. Deng, K. Zheng, G. Wei, J.H. Tang and Z.P. Zhang 2372Design of Indoor Harmful Gas Monitor SystemY.L. Yang and Z.Y. Xie 2376Research of the Elevator Monitoring System Based on the Internet of ThingsS.L. Tu, Z.Y. Wu and B. Qian 2380Blade Inspection SystemT. Chen 2386Research on Crater Wear Monitoring in TurningX.F. Bi and C.S. Yang 2390Study on Development Trend of Intellectualization of Condition Monitoring for PortLogistics Machinery in Western ChinaY. Wang, Y.S. Wu and L.S. Wang 2394Technology of NC Machine Error Parameter Identification Based on BP Neural NetworkY.M. Li and X.Q. Shen 2399Fabric Weave Pattern’s Recognition Based on Texture Orientation FeaturesJ.Q. Shen, G.G. Li, X. Zou and Y. Li 2404Researching Metrology System on the Basis of Laser TrackerZ.Y. Mei and Z.W. Luo 2409Design of Measure and Control System of the Ring Block Casing Wear TesterX.T. Yang, X.Z. Wang, Y.P. Cao and Y.H. Dou 2414Employing Remote Mobile Scheme to Control Work Area via an Integrated WirelessNetworkK.Y. Lian, S.J. Hsiao and W.T. Sung 2419Optimal Sample Size Allocation for Multi-Level Stress Testing under Progressive HybridInterval CensoringH.B. Yue and Y.M. Shi 2423The Hardware Design of Ultrasonic Flaw Detector Based on Single-Chip MicrocomputerAT89C52W. Liu, Z.L. Miao, H.X. Cheng and L. Cheng 2427Bulk Unloading Crane Monitoring System's Design and Development Based on KingviewX.S. Pang and Z.R. Su 2431A Multi-Degree of Freedom Laser Scanning Simulation PlatformH.J. Sun, J. Huang, G. Guo and Y. Hu 2435Research and Implementation of Positioning System Based on UltrasonicH.F. Wang and X.H. Liu 2439EEMD-ApEn Applied in Power Quality Detection and ClassificationY.X. Su, G.P. Liu and X.Q. Shen 2443Advances in Data-Driven Monitoring Methods for Complex ProcessR.Q. Chen 2448Research of Snow-Degraded Image Clearness MethodsK. Song, D. Yang and X. Nie 2452The Technology Research for the Extraction of Human Eyes FeatureH.Y. Ning 2456Study on Signals Processing in State Detection of Tunnel Excavation Equipment's CutterHeadJ.Y. Liang, P. Li and L. Chen 2460Application of Wavelet Denoising Algorithm in Nondestructive Testing Based on LabVIEWY.F. Yu, D.S. Zhang, H.X. Cheng and L. Cheng 2464Ultrasonic Testing Signal De-Noising Processing Based on Orthogonal Matching PursuitAlgorithmY.F. Yu, F. Yi, H.X. Cheng and L. Cheng 2468Research on De-Noising Technology in Ultrasonic on-Line Detecting SystemH.X. Cheng, Z.H. Cheng, W. Liu and L. Cheng 2472A Simple Method for Data Processing of Surface Dynamometer CardW. Sun, S.M. Wang and T. Ren 2476

v Applied Materials and Technologies for Modern Manufacturing

Fault Diagnosis of Bearing Based on Selective Ensemble of Multiple Fuzzy ARTMAPNeural NetworksZ.B. Xu, H. Wu and T.L. Shi 2480Study on Thermogravimetry Data of Cooking Oil Tar Based on Adaptive Wavelet AnalysisZ.W. Xie 2486Research on the Algorithm of Adaptive Loop Filter Based on Flexible QuadtreeG. Wang, H.X. Chen and M.S. Chen 2491Research of Vector Hydrophone Adaptive Signal ProcessingB.L. Ma, J.F. Cheng and W. Zhang 2496Research on Virtual Simulation Technique Based on ShaderQ.C. Cui, X.X. Li and J.P. Hao 2507New just-Noticeable-Distortion Model Based on the Depth Information and its Applicationin Multiview Video CodingX.Y. Liu, M. Yu, T. Tian and C.Z. Hu 2512Research on Panorama Generation Based on Homography EstimationJ. Ying, Y.B. Song and L.L. Lu 2518An Enhanced NAS-RIF Algorithm for Blind Image Restoration Based on Total VariationRegularizationX.K. Li, C. Gao, Y.C. Guo and Y.H. Shao 2522Sub-Pixel Edge Detection on the Product LineX. Zhu and Y.L. Zhang 2526Vision Measurement for the Pose of Cannon BarrelJ.D. Su, X.S. Duan and J. Xiao 2530Faulty Insulator Diagnosis for UAV Videos Based on Repetitiveness FeatureL. Lin, B.F. Li, L. Wang, Y. Cong and Y.D. Tang 2536Hybrid Algorithm for Face Recognition Using an Evolutionary Software EngineeringH.S. Vargas and A.D. Martinez 2543A Vision-Based System for Power Transmission Facilities DetectionD.L. Wu, B.F. Li, W.T. Li, Y. Xia and Y.D. Tang 2547Non-Destructive Testing Device for Hot Forming High Strength Steel Parts Based onBarkhausen NoiseX.Y. Luo, Y. Zhang, Z.J. Wang and Y.S. Zhang 2555The Design of High-Precision Temperature Measurement System Based on C8051F350 andPT100L. Liu, Y.C. Zhang, S. Hua, J. Xiao and L.J. Huang 2559Research of Smart Composite Insulator with Optical Fiber Bragg GratingH.L. Yang, S.B. Liang, X.P. Miao, M. Cao and M. Chang 2563Extraction of Optimal Contour Dominant Points Based on ICT Images in ReverseEngineeringG.S. Liu and B.L. Li 2570An Automatic Testing System Design for Accelerometer Based on LabVIEWK.B. Zhang, J.L. Zhang, J.M. Gao and Z.Z. Wu 2576Study of InSAS Interferogram Filtering Based on Lattice Boltzmann MethodC.S. Song, J. Yue and H.X. Gao 2581Automatic Point Clouds Registration Method Based on Mesh SegmentationL.H. Fan, B. Liu, B.L. Xie and Q. Chen 2587Image Matching Application Based on Modified SURF AlgorithmZ.Y. Ma, S.X. Shi, L.X. Yuan, P.C. Gu and H. Huang 2591The Analysis of Sporopollen Data Based on Fuzzy MathematicsC.X. Wang 2597Ceramic Microstructure Image Segmentation by Mean ShiftH.H. Cai, Y. Cheng and B.X. Liu 2602Three-Dimensional CT Imaging with Volume Rending of Separating Fusing, Opacifyingand False-Coloring TechniqueS.Y. Duan, H. Zhong and F. Ye 2606The Experimental Research on the Static-Loaded Beam Based on the Artificial NeuralNetwork TechniqueJ. Zhang, Q.Y. Cai, H.M. Tang and B.Z. Guo 2610

Applied Mechanics and Materials Vols. 423-426 w

An Insect Song Signal Feature Extraction Method Based on the Wavelet Packet AnalysisJ. Xie, H.W. Wang, M. Zhao and K.Y. Yang 2614

Chapter 23: Electronic Engineering, Embedded System andInformation Technologies

Video Transmission Control System Based on 3G Wireless NetworkK.Q. Wang, L. Xiong, B.C. Yang and C.C. Meng 2621Study on Data Transfer Mode of Port Logistics Operating Machinery Based on IndustrialEthernetY. Wang, L.L. Li and L.S. Wang 2625Hardware Circuit Design for Direct-Coupled SVGX.B. Dai, J. Yin and W. Du 2629Research and Implementation of Lithium Primary Battery Management System for MineRescue EquipmentJ.J. Wang, X.Q. Yuan and B. Li 2635Design and Simulation of Testing Circuit for Radio Frequency ChipQ. Luo, H. Chen and G.Y. Li 2639Design of High Power RGB White Light Emitting DiodesW. Chen, L. Wang, L.Q. Yang and J.H. Zhang 2645The Application of Data Radio Broadcasting Station Base on GPRSF. Zheng, H.R. Lu and L.J. Guo 2651Remote Communication System for Transmission Line Monitoring Based on CMAW. Wang, H. Deng, W. Shen, Q.G. Yao and X.Q. Wang 2655Spontaneous Radiation Energy of Current Filaments in GaAs PhotoconductiveSemiconductor SwitchesH. Liu, L. Zheng, H.J. Yang, W. Yang and Y.L. Zheng 2659Design of Outdoor Unit for Wireless Microwave Transmission SystemB.W. Huang and Y. Jiao 2663A New Routing Method Based on Hybrid AlgorithmJ.H. Chen and Y.L. Tang 2667Ethernet Controller and Serial Interface Conversion Technology Based on FPGAJ.F. Zhang, P.F. Zhan and G. Zhang 2671Modified BP Neural Network Model is Used for Odd-Even Discrimination of IntegerNumberB.L. Hu, J.R. Xu, H.H. Gao, J.H. Liu and K.R. Wang 2675Complete Design of Circuit Board Based on Altium Desinger Summer 09L. Zhang, X.F. Peng, L. He and W.L. Wan 2679Analysis of a New Design of FSSY.C. Song, K.B. Tan, X.P. Wang, T. Su and H.M. Lu 2684Study of System Modeling and Simulation Based on Mixed Domain for Analog-DigitalMixed SoCJ. Deng, L. Zhou, X.Z. Huang, X. Huang, Y.J. Li, L.T. Liu and Y. Tao 2688Research of the IT Capability Maturity Model and its Extension Evaluation of Smart GridZ.L. Cai, H.C. Shu and W. Zhang 2693Dynamic Delegation Approach in the Electronic Evidence Storage of Cloud PlatformY.F. Wang, J. Xie and Z.G. Xian 2703Conflict and Hidden Trouble of Distributing Misplay at Memory ResourcesH.S. Yang, Y. Wang, Y.L. Yang, X.L. Peng, X.P. Wang and Y.J. Pu 2707Interest Mining Algorithm Based on Blog InformationG.H. Ou, C.J. Xu, H.X. Zhan, Y. Qin and H. Huang 2712Research on Information Processing Technology of Title Bar for AutoCAD/ERP IntegrationL. Li, Z.Y. Wu, L.H. Wu and N.B. Liu 2716Increase the Innovation Dynamics by Information and Communication Technology (ICT):Examples of E-GovernmentH.B. Chen, J.M. Zhou and C.F. Zhou 2720

x Applied Materials and Technologies for Modern Manufacturing

Algorithm Design of Gravity and Magnetic 3D Parallel Inversion Based on MultithreadingTechnologyW.L. Wu, M. Liang and W. He 2724Research of IPv6 Evolution TechnologyG.X. Zhao 2729The Design of Distributed File System Based on HDFSY.N. Wang, S.D. Zhang and H. Liu 2733Design and Development of EOS/MODIS Satellite Data Automatic Download RobotD.Y. Cao, K.N. Xu, Z.Y. Wang and J.W. Ma 2737The Auto-Design Network Platform of Synthesis Mining Curve Based on J2EEL.P. Yang and W. Wang 2742Buddy Algorithm Optimization in Linux Memory ManagementZ.F. Meng and S.D. Zhang 2746Towards an Entity-Based Scientific Metadata SchemaH. Xu 2751Towards a Semantic LaTeX for Managing Scientific KnowledgeH. Xu 2755Analysis of a SystemC.G. Shi 2759Study on the Storage of Chinese Character Font Library and Graphics Library on SPIFlash ChipL. Shen, G. Du, Y.H. Hou and N.N. Zhang 2763

Chapter 24: Mechatronics, Robotics and Control, Automation ofManufacture

The Accuracy Analysis of Parallel Mechanism Assembly RobotX.R. Liu 2769Design and Simulation of Five-Fingered Hand with Linkage MechanismB.L. Yin, B.B. Yan and J.F. Wang 2776The Development of Special CNC System for Profiling Lathe Based on Digital CaptureMeasurementP.J. Wang, Y. Wu, J.F. Qi, J.H. Chen and H. Xiang 2780Real-Time Solution of Inverse Kinematics for 6R Robot Manipulators Using Digital SignalProcessorL. Chen, H.H. Pan and H.L. Mao 2788Research on the Double-Loop Robust Control Technology for the Electric-Hydraulic ServoSystemT.P. He, S. Li and X.L. Li 2792Gait Transition of Quadruped Robot Using Time Sequence Control Based on Finite-StateMachineA. Liu, X.Y. Zhang and K.G. Zhang 2799Control System of Tension Test for Spring Fan Wheel AssemblyK.Q. Wang, C.C. Meng, P. Li and J.Q. Fan 2805Full Software CNC System Based on RTLinuxK.Q. Wang, L. Liu, J.Q. Fan and B.C. Yang 2809The Multi-Model Predictive Control Method Research on the Outlet Temperature Controlof Hot-Blast StoveY.J. Zhang, J.H. Su and Z.J. Lu 2813Project Donaxi@HOME Service RobotH.S. Vargas, E. Olmedo, A.D. Martinez, V. Poisot, A. Perroni, A. Rodriguez, O. Granillo, C.Merino, C. Peto, W. Antonio, C. Carbonel and A. Orozco 2817A 3-DOF Controlled, High-Speed, High-Precision Local Actuator for Micro ElectricalDischarge MachiningX.Y. Zhang, T. Ishizuka and K. Uchiyama 2821Study on Improved Fuzzy Immune PID Controller for Maglev Transportation System withTrack IrregularityR.R. Song, W.H. Ma and Z.L. Chen 2825

Applied Mechanics and Materials Vols. 423-426 y

Application of Internet of Things in Monitoring System of Intelligent BuildingH.M. Qu and X.S. Tao 2832Control Algorithm Analysis of Rig's Electro-Hydraulic Proportional Control SystemX.Y. Zhao 2837Research and Implementation of Speed Controlling Algorithm on Intelligent Racing CarZ.W. Dong, D.Q. Zeng, J.Z. Liu, G.L. Xiong and H.Y. Ou 2841A Method of High Accuracy Control for Motor-Based Photoelectric TrackingInstrumentation Base on InclinometerD.Y. Ning, C.L. Sun and Y.J. Gong 2846Design and Simulation of the Intelligent Control of the Greenhouse TemperatureL. Zhao 2851A Framework of an Intelligent Process Planning System for Milling Based on STEP-NCH.B. Ouyang 2855Coordination Control for RBS and ABSY. Yang, L. Chu, L. Yao and J. Wen 2859Research on High Power Direct Drive Differential Volume Control Electro-Hydraulic ServoSystemZ.X. Zhang and X.Y. Xu 2865A New Direct Algorithm for Pole-Placement by State-Derivative Feedback for Single-InputLinear SystemsZ.H. Gao 2869Research on the Key Technology of Automatic Programming System for Line-ContactProcessingK.Q. Wang, B.C. Yang, L. Xiong and L. Liu 2873Freeway Ramp Metering Based on Cell Transmission Model and Single NeuronY.D. Ye, Y.Y. Liu, X.R. Liang and C.J. Dong 2877Research on Electro-Hydraulic Proportional Self-Tuning Fuzzy-PID Control System Basedon MATLABM.J. Li and G.S. Ren 2882Research on Control Scheme of Daul-Cyinder Reverse Synchronous Hydraulic SystemG.H. Zhao 2886Application Research on Learning Strategy Control of Daul-Cylinder SynchronousMovementG.H. Zhao and J.G. Chen 2890The Electronic Control System of Automatic Optical Scissors and Optical TweezersY.Z. Li, S.Q. Shen and A.P. Ye 2894The Research and Application of Particle Swarm Optimization in Parameter Tuning onPID ControllerY.L. Tang and J.H. Chen 2899Dynamic Infrared Scene Simulation Study Based on DMD Imaging SystemY.Y. Ding and S.C. Xiao 2903Digital Automatic Assembly Technology of Stubble-Cutting Equipment of No-Till PlanterX.H. Bai, F. Li and J. Lin 2907

Chapter 25: Engineering Education

Benchmarking the Industrial Expectations of Civil Engineering Students throughInternship PlacementsT.L. Lau, B.H. Goh, C.L. Liew and W.K. Choong 2913Java Course Teaching System Based on Practice and Innovation Ability TrainingL.P. Yang and W. Wang 2918Research on the Evaluation of Cost-Effectiveness of UniversitiesC. Wang 2922Optimal Model of Predicting the School Effectiveness of UniversitiesC.J. Rao 2926Study on Evaluation Methods of Disciplines in UniversitiesC.J. Rao 2930

z Applied Materials and Technologies for Modern Manufacturing

Study on Manufacturing Practice Platform Construction of Mechanical Industrial DesignX.W. Jiang and Q.L. Du 2934

Chapter 26: Related Themes

Comparison Analysis of Train Derailment between Bridges and LinesS.G. Cao, R.L. Chen, Z. Tang, X.Q. Xiao, H.B. Hu, S.J. Tang, Y.Q. Liu and R.H. Gao 2941Applicability Study on Simulating Interference of Mixed Traffic at Signalized IntersectionsUsing VISSIMC.H. Li and S.S. Li 2946Study of Chinese Tourism Planning towards Cultural and Regional IntegrationY.J. Liu 2950The Urban Road Short-Term Traffic Flow Prediction ResearchZ.H. Qin 2954Study on Numerical Simulation of Secondary Dust Deposition PhenomenonB.C. Ling, H.Y. Ju and Z. Ye 2957Cause Analysis of the Various Shapes of Leaves and Estimate the Actual Weight of theLeavesW.H. Sun, J.H. Liu, X.L. Ni and W.F. Fan 2963Facial Diagnosis of CHB Clinical Syndromes Based on Computer TechnologyZ. Wang, R. Zhou, F.F. Li, P. Qian and Z.M. Sun 2968Family House-Purchase Decision Model Based on Analytic Hierarchy ProcessC. Wang 2973

Table of Contents