T8000/T8000 PRO - Home : Johnson Health Tech. Co., …jhta.com.au/.../johnson_t8000_tm68_owners_manual.pdf• Model T8000 & T8000PRO Specifications 02 03 05 10 18 19 35 38 42 01 JOHNSON

JOHNSON HEALTH TECH. CO., LTD.No.26, Ching Chuan Rd., Taya Hsiang, Taichung Hsien 428, Taiwan, R.O.C.

TEL: +886-4-25667100 FAX: +886-4-25683456E-mail: [email protected]://www.johnsonfitness.com OWNER'S MANUAL

T8000/T8000 PRO

Nov.07.06’

TABLE OF CONTENTSINTRODUCTION

IMPORTANT SAFETY INSTRUCTIONS

SETUP THE TREADMILL • Getting Started • Making A Choice Of Site • Stabilizing The Johnson Treadmill • Centering The Belt

• Grounding Instructions • Electrical Power Requirement

• Unpacking The Johnson Treadmill

ASSEMBLY • Fasteners & Assembly Tools • Assembly Instructions

SERIAL NUMBER LOCATION

USING THE WORKOUTS • Display Console • Display Prompt Value • Workout Overviews • Workout Tips • Workout Setup Steps • Using Fitness Networking

MANAGER'S CUSTOM SETTINGS • The List Of Manager's Custom Settings

MAINTENANCE • Recommended Cleaning Tips • Centering The Belt • Tensioning The Existing Belt • Maintenance Lamp

PRODUCT SPECIFICATIONS • Model T8000 & T8000PRO Specifications

02

03

05

10

18

19

35

38

42

01

J O H N S O N T R E A D M I L L T 8 0 0 0 / T 8 0 0 0 P R O

This Owner’s Manual describes the functions of the following product:Johnson Fitness Treadmills – T8000 & T8000PROSee "Specifications" in this manual for product specific features, the Johnson Treadmill T8000 and T8000PRO are intended for commercial use.

It is recommended that all users of Johnson Fitness exercise equipment should be informed of the following information prior to its use.When using the Johnson treadmill, always follow basic precautions:

• To ensure your safety and to protect the unit, read all the instructions before assembling and using the Treadmill.

• To ensure the proper use and safety of the Treadmill, make sure that all users read this manual. Please make this manual a part of your facility’s training program. Remind the users that before undertaking any fitness programme, they should obtain complete physical examinations from their physicians. If, at any time while exercising, the user experiences dizziness, pain, or shortness of breath, nausea or feels faint he or she must stop immediately.

SAVE THIS OWNER’S MANUAL FOR FUTURE REFERENCE.

INTRODUCTIONREAD AND SAVE ALL INSTRUCTIONS before assembling or using this Johnson Treadmill. It is strongly recommended to take the following safety instructions.

• DANGER: To reduce the risk of electrical shock, always unplug the Johnson Treadmill before cleaning or attempting any maintenance activity.• WARNING: To reduce the risk of burns, fire, electric shock, or injury, it is imperative to connect each product to a properly grounded electrical outlet.• CAUTION: If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising immediately and consult your physician before continuing.• Never operate the treadmill if it has a damaged power cord or electrical plug, if it is not working properly, or if it has been damaged or immersed in water. Return the treadmill to Johnson Fitness or authorized dealers for examination and repair.• Keep the power cord away from heated surfaces. Do not pull the equipment by the power cord or use the cord as a handle. Never place the power cord under carpeting or place any object on top of the power cord. • Only use the power cord provided with your Johnson treadmill. If the power cord is damaged, it must be replaced by the manufacturer, an authorized service agent, or a a similarly qualified person to avoid a hazard.• To disconnect, turn the switch to the off position, then remove the plug from the outlet. • Use this treadmill for its intended purpose as described in this manual. Do not use attachments that have not been recommended by the manufacturer.• Never drop or insert any object into any opening in the product. If an object should drop inside, turn off the power, unplug the power cord from the outlet, and carefully retrieve it. If the item cannot be reached, contact Johnson Fitness or authorized dealers. • Do not reach into, or underneath, the unit or tip it on its side during operation.• Keep hands and feet clear at all times from moving parts to avoid injury.• Do not remove the treadmill motor cover or roller covers. Service should be performed only by an authorized service technician.• Do not use any equipment that is damaged or has worn or broken parts. Use only replacement parts supplied by Johnson Fitness or authorized dealers.• Do not use the Johnson Treadmill outdoors, near swimming pools or in areas of high humidity. • Do not operate where aerosol (spray) products are being used or when oxygen is being administered.

IMPORTANT SAFETY INSTRUCTIONS

0302

J O H N S O N T R E A D M I L L T 8 0 0 0 / T 8 0 0 0 P R O J O H N S O N T R E A D M I L L T 8 0 0 0 / T 8 0 0 0 P R O

• Be sure the emergency stop pull cord is clipped to user and in a proper placed position

on the user before beginning any workout.

• Use the stationary handrails when mount or dismount the treadmill. Place the feet firmly

on the right and left side platforms before the running belt begins moving (prior to a

workout). Step onto the running belt when the speed is at or below 1.6 km/h (1 mph).

• Never mount or dismount the treadmill while the running belt is moving.

• Handrails may be held to enhance stability as needed, but are not for continuous use. • Do not wear any clothing that might catch on any moving parts of this treadmill.

• Never walk or jog backwards on the treadmill.

• Do not use this product in bare feet. Do not use shoes with heels, leather soles, cleats or

spikes. Make sure no stones are embedded in the soles.

• Do not turn the belt by hand.

• Close supervision is necessary when used near children, invalids or disabled people. • When the treadmill is in use, young children and pets should be kept at least 3 meters / 10 feet away.

• When it is necessary to immobilize the treadmill,

T8000:Set the display to read "CHOOSE PROGRAM THEN PRESS ENTER". Then hold down the “RESET” and “ENTER” keys at the same time. The treadmill will now display "IMMOBILIZED". In this state, the treadmill can not be operated. Both the drive motor & elevation motor are disabled. The treadmill will remain in this state across power cycles, resets, etc. To return to normal operation mode repeat the same key sequence, hold down the “RESET” & “ENTER” keys. The treadmill will display "CHOOSE PROGRAM THEN PRESS ENTER" again.

T8000 PRO:Set the display to read "SELECT PROGRAM GROUP". Then hold down the "CH " and "VOL " keys at the same time. The treadmill will now display "IMMOBILIZED". In this state, the treadmill can not be operated. Both the drive motor & elevation motor are disabled. The treadmill will remain in this state across power cycles, resets, etc. To return to normal operation mode repeat the same key sequence, hold down the "CH " and "VOL " keys. The treadmill will display "SELECT PROGRAM GROUP" again.

GETTING STARTEDRead the Owners Manual before setting up the Johnson Fitness Treadmill. Place the treadmill where it will be used before beginning the setup procedure.

MAKING A CHOICE OF SITEThe site that you select for the treadmill should be well-lit and well ventilated. Locate the T8000 or T8000PRO on a structurally solid and flat surface a few meters / feet from the wall or any equipment (Allow a distance of 21 centimeters, or eight inches, between the treadmill and other units on either side. Allow a distance of two meters, or six feet, from the rear of the treadmill to any object or surface.) If the site has a heavy plush carpet, to protect the carpeting and machinery, you should place a rigid plastic base under the treadmill.

Please do not place the treadmill in an area of high humidity, such as the vicinity of a steam room, indoor pool, or sauna. Exposure to intensive water vapor or chlorine could adversely affect the electronics, as well as other parts of the machine. To make exercise a desirable daily activity for you, the treadmill should be in an attractive setting.

STABILIZING THE JOHNSON TREADMILLAfter placing the unit where it will be used, check its stability. If the Treadmill is placed ona slightly, uneven surface, adjusting the adjustable levelers located underneath the base frame can help, but will not compensate for extremely uneven surfaces. To adjust, loosen the nut, and turn the leveler until the rocking motion ceases, and both levelers rest firmly on the floor. Retighten the nut.

NOTE: It is extremely important that the levelers be correctly adjusted for proper operation. An unbalanced unit may cause striding belt misalignment. A bubble level is recommended to ensure proper leveling.

SETUP THE TREADMILL

0504


Supply Voltage Frequency Rated Current (Amps)

100

120

200

220

230

240+

50/60 Hz

50/60 Hz

50/60 Hz

50/60 Hz

50/60 Hz

50/60 Hz

15

15

10

10

10

10

15

15

8

8

8

8

CENTERING THE BELTAfter installing and leveling the treadmill, check the belt to ensure that it is tracking properly. The belt might need to be adjusted after the first two hours of use. If the belt needs to be adjusted, please see at the section of MAINTENACE for details.

ELECTRICAL POWER REQUIREMENTThe Johnson Fitness Treadmill requires a dedicated line according to the electrical configurations listed in the chart below. It is particularly important that no sensitive electrical equipment, such as a computer or a TV, shares the same circuit.

GROUNDING INSTRUCTIONSThe Johnson Treadmill must be properly grounded. If the product malfunctions or breaks down, proper grounding provides a path of least resistance for the electric current to reduce the risk of electrical shock. This product is equipped with an electrical cord, which includes an equipment grounding conductor and a grounding plug. The plug must be inserted into an outlet that has been properly installed and grounded in accordance with all local codes and ordinances.

DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service provider if you are in doubt as to whether or not the product is properly grounded. DO NOTmodify the plug provided with the product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified electrician. Any modification to the electrical plug will result in a voided warranty.

UNPACKING THE JOHNSON TREADMILLThe Johnson treadmill is carefully inspected before it is packaged. It is shipped in four pieces: the frame base, the upright console supports, the console, the foam rubber handles and the hardware kit. Carefully unpack the unit and dispose of the box material.

CAUTION: This unit weighs 165 kg / 365 lbs. To avoid injury to the user and the unit, be sure to have proper assistance to remove and move the unit.

0706


(VAC) (Hz) T8000 T8000 PRO

ADJUSTING THE BELT

NOTE: In case any of these parts are missing from the package, please contact Johnson Fitness or the local authorized dealers at once.

Hardware Kit Hardware Kit

T8000

09

J O H N S O N F I T N E S S T R E A D M I L L T 8 0 0 0 / T 8 0 0 0 P R O

08


Console

T8000 PRO

Console Console Supports Console Supports

Foam Rubber Handles Foam Rubber Handles

Frame Base Frame Base

11

J O H N S O N F I T N E S S T R E A D M I L L T 8 0 0 0 / T 8 0 0 0 P R O

10


ASSEMBLY EXPLODED DIAGRAM

Z52

Z52

Q53

Z53

Z51

Z51

N07

N06

Z50

Z50

Motor Cover

Console

Swift Controls™ Panel

Frame Base

Foam Rubber Handle

Console Support

ASSEMBLYFASTENERS & ASSEMBLY TOOLS

PHILLIPS SCREWDRIVER

#5 L-TYPE ALLEN KEY

SOCKET HEAD SCREW (M10 x 1.5P x 25L)

SOCKET HEAD SCREW (LOW HEAD)

CROSS-HEAD BUTTON SCREW

#8 L-TYPE ALLEN KEY

#2 L-TYPE ALLEN KEY

WASHER

PARTS NO. DESCRIPTION QUANTITY SKETCH

Z01

Z02

Z03

Z04

Z50

Z51

Z52

Z53

Z54

1

1

1

1

8

8

4

2

4

ASSEMBLY INSTRUCTIONSPlease make sure that the power plug is not plugged into the wall outlet while completing the following procedure. To ensure correct assembly of the T8000E, carefully read and follow these steps:

ATTENTION: After installation is completed, the treadmill will need to be calibrated by using the AUTO-CHECK function. If this is not done, the treadmill's speed and incline values may be incorrect and damage the treadmill. Do not stand on the belt when performing the AUTO-CHECK function.

(M8 x 1.25P x 15L)

(M3 x 0.5P x 15L)

(M5 x 0.8P x 12L)

SOCKET HEAD CAP SCREW (ULTRA LOW HEAD)

1312

STEP 1 STEP 2Unscrew the screw (Q53) on each side, and keep the screws. Remove the motor cover.

Pull out the console, antenna coaxial signal and C-SAFE cables and route them through the right console mast. Place the right console mast and then the left console mast in the console support brackets. Secure the right and left support with the 4 screws and 2 washers provided (Z51, Z50). Make sure these screws are tightened.

Connect the console cables from the console set to the motor control board cables. Secure the console set with 2 screws (Z52) on each side.


Z51

Z51

Z50

Z50

Z52

Z52

1514

STEP 3 STEP 4Put the foam rubber handle into the handlebar frame. Use the handlebar cap (N06, N07) to secure the handle foam rubber. Note: The handle bar caps separate into right and left, make sure these caps are in the correct position.

1). Connect the speed and incline Swift Controls™ cables with the control panels. Secure the Swift Controls™ panels onto the handlebars with the 2 screws (Z54) on each side.

2). Place the motor cover onto the treadmill front end and secure with the screws (Q53) included in the motor cover and the screws (Z53) provided in the hardware kit. Plug the power cable into the outlet.


N06

N04N07

N03

Z53

Q53

Note: The Swift Controls™ panels separate into right for SPEED control and left for INCLINE control, make sure these panels are in the correct position.

1716

FINAL ASSEMBLYEnter the to execute P16 AUTO CHECK. The treadmill’s speed and incline will be calibrated automatically. This will take around 2 minutes to run. After completing calibration, press EMERGENCY STOP key twice to back to the initial starting screen.


T8000

T8000 PRO

OPTIONAL ENTERTAINMENT ACCESSORY SHOWN MANAGER’s CUSTOM SETTINGS

T8000

JOHNSON FIT

NESS

PRO

T8000

T8000 PRO

T8000

JOHNSON FIT

NESS

PRO

SERIAL NUMBER LOCATION

1918


SERIAL # PLACEMENT

USING THE WORKOUTS DISPLAY CONSOLE

T8000A

B

C

D

E

A

B

D

CE

WORKOUT PROFILE WINDOW: During a workout, intervals, hills and valleys appear in this window as rows of lights stacked in columns. The number of lit rows within a column corresponds to an incline percentage.

INSTURCTION CENTER: This window displays step-by-step instructions for setting up a workout.

EMERGENCY STOP: Press the button to stop the running belt and end the current workout. To resume, press the button once again.

INFORMATIONAL DISPLAY: While you exercise, three sets of numbers, including Speed, Time and Incline, show information about your workout session.

CONTROL KEYPAD: The control keypad allows the user to set up programs and control workout.

6 12 25 34 4

CONTROL KEYPAD: The control keypad allows the user to set up programs, control workout and adjustTV parameters.

2120


MODEL T8000 :

T8000 PRO

A

B

D

CE

A

B

C

D

E

WORKOUT PROFILE WINDOW: During a workout, intervals, hills and valleys appear in this window as rows of lights stacked in columns. The number of lit rows within a column corresponds to an incline percentage.

INSTURCTION CENTER: This window displays step-by-step instructions for setting up a workout.

EMERGENCY STOP: Press the button to stop the running belt and end the current workout. To resume, press the button once again.

INFORMATIONAL DISPLAY: While you exercise, three sets of numbers, including Speed, Time and Incline, show information about your workout session.

1 NUMBER keys: Press the numbers to input exercise Time, Weight, Level, Age, Heart Rate, Speed and Incline. ENTER key: Press this key to confirm an entry of the number. RESET key: Press this key to clear data not yet entered.2 STOP: Press this key once to pause the treadmill in 60 seconds. To resume, press the "Quick Start" key to continue running the program, otherwise the machine will reset automatically. Or, press and hold down the "Stop" key to reset the treadmill.3 QUICK START: Press this key to begin your workout immediately, without having to select a workout program.4 SPEED & INCLINE: Use the + / - or arrow keys to adjust speed or incline.5 SELECT keys: Press this key to confirm entries of workout setup values, as displayed in the INFORMATION CENTER.6 PROGRAM QUICK-KEYS: To begin an exercise session, press any of these keys to select the program.

MODEL T8000 PRO :1 E-CONNEXTION™ CONTROL KEYS: If the entertainment option is attached, the keys act as TV remote controls.2 SPEED & INCLINE: Use the arrow keys to adjust speed or incline.3 START / ENTER / QUICK START: This key has several functions during an exercise session. Each function is described as below: START: Use the START key to begin your workout after the workout setup. ENTER: Use the ENTER key to confirm specific prompts during the workout setup. QUICK START: Press QUICK START to begin your workout immediately, without having to select a workout program.4 RIGHT and LEFT Arrows: These right and left arrows present the available selections and affect what appears on the display.5 STOP / CLEAR / PAUSE: This key has several functions during an exercise session. Each function is described as below: STOP / PAUSE: Press this key once to enter PAUSE mode. And, press it again to reset the treadmill and restart the programming sequence. CLEAR: Use the CLEAR key to clear data not yet entered during the workout setup.6 PROGRAM GROUP KEYS: Press any of these keys to view a menu of programs within each category. These categories include: AEROBICS, LANDSCAPE, GOAL, and PERSIONAL TRAINER. For detailed program descriptions, refer to WORKOUT OVERIVEWS. WARM UP: Press this key to begin an automatically customized workout warm-up. COOL DOWN: Press this key to begin an automatically customized workout cool-down.

6 12 25 34 4

22


23


MODEL T8000 PRO

PROMPT DEFAULT MINIMUM MAXIMUM UNIT

TIME

LEVEL

WEIGHT

AGE

SPEED

INCLINE

DISTANCE

CALORIES

GENDER

20

1

68 / 150

30

N/A

N/A

5 / 3

500

MALE

10

1

34 / 75

10

0.8 / 0.5

0

1 / 1

50

MALE

99

10

182 / 400

99

20 / 12

15

80 / 50

5000

FEMALE

minute

kg / lbs

years old

km/h / mph

%

km / mile

cal.

MODEL T8000

PROMPT DEFAULT MINIMUM MAXIMUM UNIT

TIME

LEVEL

WEIGHT

AGE

SPEED

INCLINE

20

1

68 / 150

30

N/A

N/A

10

1

34 / 75

10

0.8 / 0.5

0

99

10

182 / 400

99

20 / 12

15

minute

kg / lbs

years old

km/h / mph

%

NOTE: The workout time displays “countdown” according to default time or the maximum time that the club owner set. When the workout time input as “0”, the time will count from 0 to the maximum time depending on the fitness club setup. The workout pattern repeats until the maximum workout time is completed.

DISPLAY CONSOLE PROGRAMNAME

DEFAULTTIME

PROGRAMCONTROL

PROMPTINPUT

DESCRIPTION

QUICKSTART

MANUAL

INTERVAL

WEIGHTLOSS

FAT BURN

5K RUN

TARGETHR

N/A

20 min

20 min

20 min

20 min

N/A

20 min

N/A

N/A

Elevation

Elevation

Elevation

Elevation

Speed orElevation

N/A

Time,Weight

Level, Time,Weight

Level, Time,Weight

Level, Time,Weight

Level, Weight

Age, TargetHeart RateMax Speedor MaxElevation,Time,Weight

WORKOUT OVERVIEWS

Quick Start is the fastest way to begin exercising and bypasses the setup prompts. After pressing the QUICK START key, a constant-level workout begins, and the speed and incline do not change automatically.

Manual is a constant effort workout in which the user can change incline or speed at any time.

Interval is periods of intense aerobic exercise separated by regular periods of lower-intensity exercise. At any point during the workout, the user can change the settings of the current speed.

Weight Loss is designed to promote weight loss by raising and lowering the elevation. The treadmill automatically adjusts the incline according to the overall time.

Fat Burn is a high-intensity workout for burning the body's fat reserves. The program adjusts the intensity level through changing the elevation, and the user controls the speed during the workout.

5K Run is designed to simulate a 5K run with elevation changes. The program completes when the user has completed 5K, so there is no preset time. The user can make speed changes during this program.

Target HR is a higher intensity workout for more fit users, emphasizing cardiovascular benefits. The user must wear a heart rate chest strap, or grasps the HR grip sensors continuously. The program adjusts the intensity level, based on the actual heart rate, to maintain the rate at 80 percent of the theoretical maximum.

MODEL T8000 :

2524


PROGRAMNAME

PROGRAMGROUP

DEFAULTTIME

PROGRAMCONTROL

PROMPTINPUT

DESCRIPTION

QUICKSTART

WARMUP

COOLDOWN

MANUAL

INTERVAL

FAT BURN

RANDOM

Quick Start is the fastest way to begin exercising and bypasses the setup prompts. After pressing the QUICK START key, a constant-level workout begins, and the speed and incline do not change automatically.

Warm-up is a low-intensity phase that brings the heart rate into the lower end of the target zone and increases respiration and blood flow to working muscles.

Cool-down is a low-intensity phase that allows the body to begin removing lactic acid, and other exercise by-products, which build up in muscles and contribute to soreness.

Manual is a constant effort workout in which the user can change incline or speed at any time.

Interval is periods of intense aerobic exercise separated by regular periods of lower-intensity exercise. At any point during the workout, the user can change the settings of the current speed.

Fat Burn is a high-intensity workout for burning the body's fat reserves. The program adjusts the intensity level through changing the elevation, and the user controls the speed during the workout.

Random is an interval training workout of constantly changing intensity levels that occur in no regular pattern or progression.

MODEL T8000PRO :

AEROBICS

N/A N/A N/A

Time

Time

Time,Weight

Level,Time,Weight

Level,Time,Weight

Level,Time,Weight

N/A

Elevation

Elevation

Elevation

Speed

Speed

N/A

N/A

20 min

20 min

20 min

20 min

PROGRAMNAME

PROGRAMGROUP

DEFAULTTIME

PROGRAMCONTROL

PROMPTINPUT

DESCRIPTION

Target HR is a higher intensity workout for more fit users, emphasizing cardiovascular benefits. The user must wear a heart rate chest strip, or keep hands on contact heart rate grips continuously. The program adjusts the intensity level, based on the actual heart rate, to maintain the rate at 80 percent of the theoretical maximum.

Weight Loss is a low-intensity workout for burning the body’s fat reserves. The user must wear a heart rate chest strip, or keep hands on contact heart rate grips continuously. The program adjusts the intensity level, based on the actual heart rate, to maintain the rate at 65 percent of the theoretical maximum.

Brave Hill takes the user climb a 45-degree hill based on a gradual elevation change.

Imagine yourself running through beautiful scenery as this Lakeside program gradually changes elevation.

Forest takes the user through several hills based on the elevation change.

This program simulates walking or running in desert that gradually increases in elevation, before its gradual decent.

Plateau is a high-intensity workout for improving your cardiovascular conditioning by simulating a plateau hill climb.

LAND-SCAPE

TARGETHR

WEIGHTLOSS

BRAVEHILL

LAKESIDE

FOREST

DESERT

PLATEAU

20 min Speed orElevation

Age, Targetheart Rate,Max Speedor MaxElevation,Time,Weight

Age, Targetheart Rate,Max Speedor MaxElevation,Time,Weight

Speed orElevation

20 min

20 min

20 min

20 min

20 min

20 min

Time, Level,Speed,Weight



Time,Speed,Weight

Time,Speed,Weight

Elevation

Elevation

Elevation

Elevation

Elevation

2726


This workout sets duration as the workout goal. Once the duration objective is met, the workout goes into a cool-down phase.

This workout is designed to build endurance in a certain distance. Once the objective is met, the workout automatically goes into a cool-down phase, and ends afterward.

This workout is designed to burn a certain number of calories in the selected time duration. Once the objective is met, the workout automatically goes into a cool-down phase, and ends afterward.

Fit Test measures cardiovascular fitness compared to other people of the same age and gender. The test takes 5 minutes and is based on your heart rate. The user must wear a heart rate chest strip, or keep hands on contact heart rate grips.

Cooper Test monitors the development of endurance. The test comprises of seeing how far the user can run or walk in 12 minutes.

GOAL

PERSONALTRAINER

PROGRAMNAME

PROGRAMGROUP

DEFAULTTIME

PROGRAMCONTROL

PROMPTINPUT

DESCRIPTION

TIMEGOAL

DISTANCEGOAL

CALORIESGOAL

FIT TEST

COOPERTEST

N/A

N/A

N/A

5 min

12 min

Time,Incline,Speed,Weight

Distance,Incline,Speed,Weight

Calories,Incline,Speed,Weight

Gender,Age, Weight

Gender,Age, Weight

Elevationand Speed

Elevationand Speed

Elevationand Speed

Elevationand Speed

Elevationand Speed

WORKOUT TIPS• Johnson Fitness strongly recommends seeing a physician for a complete medical exam before undertaking an exercise program. If, at any time while exercising, the user experiences faintness, dizziness, pain, or shortness of breathe, he or she must stop immediately.• Without anyone standing on the treadmill, plug the power cord into a dedicated electrical outlet.• The On/Off switch for the treadmill is located next to the power supply plug in. Turn the switch to the on " I " position to activate the treadmill.• To mount or dismount the treadmill, grasp the stationary side-handrails and place the feet firmly on the right and left side platforms before the running belt begins moving. Prior to the workout, please always attach the security clip to your clothing.• When you are comfortable situated onto the running belt, the computerized display console on the treadmill instructs you to operate the unit.• The better position of feet to walk on the treadmill is where feet planted on the belt to have your arms bent slightly and your hands grasped the heart rate sensors (as below illustration). At the running speed, the feet stand on the point of the belt where the hands at a natural swing are not able to touch the front handrail.• Hold onto the handrail with one hand while you increase SPEED with the other hand. Once you are comfortable with the walking or running speed, you can remove your hands from the handrail.• Do not attempt to grasp the sensors at speeds above 7.2 km/h (4.5 mph). For these speeds, the use of a heart rate chest strap is recommended.• It is highly recommended that you always incorporate the warm-up and cool-down period into your workout. Warm-up brings the heart rate into the lower end of the target

zone and increases respiration and blood flow to working muscles. Cool-down takes time for a user’s heart rate to return to a resting state after vigorous exercise and reduces the

amount of lactic acid in muscle tissue.

Target HR1) Choose the "TARGET HR" program using the PROGRAM QUICK-KEYS, then press SELECT.2) Choose your "TARGET HEART RATE" using SPEED -/+, then press SELECT.3) Choose your "HR CONTROL MODE" using SPEED or INCLINE KEYS: * If SPEED -/+ is pressed the console will display "SPEED HR CONTROL”, press - or + to set Max Speed, then press SELECT" * If INCLINE UP/DOWN is pressed the console will display "INCLINE HR CONTROL”, press up or down to set Max Incline, then press SELECT"4) Choose "TIME" using SPEED -/+, then press SELECT.5) Choose "WEIGHT" using SPEED -/+, then press SELECT.6) Press START.

MODEL T8000PRO:Use the PROGRAM GROUP KEYS to enter the program category, or use RIGHT / LEFT arrow keys to scroll to the desired program category when prompted by the INSTRUCTION CENTER. And then, use RIGHT / LEFT arrow keys to scroll to the desired program. Use the RIGHT / LEFT arrow keys to scroll to desired values displayed on the INSTRUCTION CENTER. Press the ENTER key to confirm each selection. Follow the steps to set up each workout.

Quick StartPress the "QUICK START" key and the INSTRUCTION CENTER will display "3, 2, 1, GO” The workout begins at the lowest incline and speed, and the time counts “0” to the maximum time.

Warm Up1) Press the “WARM-UP” key to enter the program.2) “ENTER TIME” to begin a warm-up.

Cool Down1) Press the “COOL-DOWN” key to enter the program.2) “ENTER TIME” to begin a cool-down.

WORKOUT SETUP STEPS

MODEL T8000:Use the PROGRAM QUICK-KEYS to enter the program, or use INCLINE / SPEED keys to scroll to desired program when prompted by the INSTRUCTION CENTER. Use the NUMBER keys to enter the values, or use INCLINE / SPEED keys to scroll to desired values displayed on the INSTRUCTION CENTER. Press the SELECT key to confirm each selection. Follow the steps to set up each workout.

Quick StartPress the "QUICK START" key and the INSTRUCTION CENTER will display "3, 2, 1, GO” The workout begins at the lowest incline and speed, and the time counts “0” to the maximum time.

Manual1) Choose the "MANUAL" program using the PROGRAM QUICK-KEYS, then press SELECT.2) Choose the TIME using SPEED -/+, then press SELECT.3) Choose the WEIGHT using SPEED -/+, then press SELECT.4) Press START.

Interval, Weight Loss & Fat Burn1) Choose the "INTERVAL, WEIGHT LOSS or FAT BURN" program using the PROGRAM QUICK-KEYS, then press SELECT.2) Choose the "LEVEL" using SPEED -/+, then press SELECT.3) Choose the "TIME" using SPEED -/+, then press SELECT.4) Choose "WEIGHT" using SPEED -/+, then press SELECT.5) Press START.

5K Run1) Choose the "5K" program using the PROGRAM QUICK-KEYS, then press SELECT.2) Choose the "LEVEL" using SPEED -/+, then press SELECT.3) Choose "WEIGHT" using SPEED -/+, then press SELECT.4) Press START.

2928


A. AEROBICS Manual 1) “ENTER TIME” using the RIGHT and LEFT arrow keys. 2) “ENTER WEIGHT” using the RIGHT and LEFT arrow keys. 3) Press START to begin the workout.

Interval, Fat Burn & Random 1) “ENTER LEVEL” using the RIGHT and LEFT arrow keys. 2) “ENTER TIME” using the RIGHT and LEFT arrow keys. 3) “ENTER WEIGHT” using the RIGHT and LEFT arrow keys. 4) Press START to begin the workout.

Target HR & Weight Loss 1) “ENTER AGE” using the RIGHT and LEFT arrow keys. 2) “ENTER HR” using the RIGHT and LEFT arrow keys. 3) “CONTROL MODE” using the RIGHT and LEFT arrow keys. * If SPEED is selected, the console will display "SET MAX SPEED”. Use the RIGHT / LEFT key to set Max Speed. * If INCLINE is selected, the console will display "SET MAX INCLINE”. Use the RIGHT / LEFT key to set Max Incline.

4) “ENTER TIME” using the RIGHT and LEFT arrow keys. 5) “ENTER WIEGHT” using the RIGHT and LEFT arrow keys. 6) Press START to begin the workout.

B. LANDSCAPE Brave Hill, Lakeside & Forest 1) “ENTER TIME” using the RIGHT and LEFT arrow keys. 2) “ENTER LEVEL” using the RIGHT and LEFT arrow keys. 3) “ENTER SPEED” using the RIGHT and LEFT arrow keys. 4) “ENTER WEIGHT” using the RIGHT and LEFT arrow keys. 5) Press START to begin the workout.

Desert & Plateau 1) “ENTER TIME” using the RIGHT and LEFT arrow keys. 2) “ENTER SPEED” using the RIGHT and LEFT arrow keys. 3) “ENTER WEIGHT” using the RIGHT and LEFT arrow keys. 4) Press START to begin the workout.

3130


C. GOAL Time Goal 1) “ENTER TIME” using the RIGHT and LEFT arrow keys. 2) “ENTER INCLINE” using the RIGHT and LEFT arrow keys. 3) “ENTER SPEED” using the RIGHT and LEFT arrow keys. 4) “ENTER WEIGHT” using the RIGHT and LEFT arrow keys. 5) Press START to begin the workout.

Distance Goal 1) “ENTER DISTANCE” using the RIGHT and LEFT arrow keys. 2) “ENTER INCLINE” using the RIGHT and LEFT arrow keys. 3) “ENTER SPEED” using the RIGHT and LEFT arrow keys. 4) “ENTER WEIGHT” using the RIGHT and LEFT arrow keys. 5) Press START to begin the workout.

Calories Goal 1) “ENTER CALORIES” using the RIGHT and LEFT arrow keys. 2) “ENTER INCLINE” using the RIGHT and LEFT arrow keys. 3) “ENTER SPEED” using the RIGHT and LEFT arrow keys. 4) “ENTER WEIGHT” using the RIGHT and LEFT arrow keys. 5) Press START to begin the workout.

D. PERSONAL TRAINER Fit Test & Cooper Test 1) “ENTER GENDER” using the RIGHT and LEFT arrow keys. 2) “ENTER AGE” using the RIGHT and LEFT arrow keys. 3) “ENTER WEIGHT” using the RIGHT and LEFT arrow keys. 4) Press START to begin the workout.

FIT TEST’S RESULT FOR MEN

3332


MenRating

Age

Estimated VO2 Max (ml/kg/min) Per Age Category

Poor Fair Average Good Excellent

15 – 19

20 – 29

30 – 39

40 – 49

50 – 59

60 +

< 42

< 38

< 34

< 30

< 25

< 21

48 – 51

38 – 43

34 – 39

30 – 35

25 – 31

21 – 26

52 – 57

44 – 51

40 – 47

36 – 43

32 – 39

27 – 35

56 – 61

52 – 57

48 – 51

44 – 48

40 – 44

36 – 40

> 61

> 57

> 51

> 48

> 44

> 40

FIT TEST’S RESULT FOR FEMALE

FemaleRating

Age


Poor Fair Average Good Excellent

15 – 19

20 – 29

30 – 39

40 – 49

50 – 59

60 +

< 30

< 28

< 27

< 25

< 21

< 17

30 – 36

28 – 34

27 – 33

25 – 31

21 – 27

17 – 23

37 – 45

35 – 43

34 – 41

32 – 40

28 – 36

24 – 31

46 – 52

44 – 50

42 – 46

41 – 46

37 – 42

32 – 37

> 52

> 50

> 48

> 46

> 42

> 37

COOPER TEST’S RESULT FOR MEN

MenRating

Age


Very Poor Poor Fair Good Excellent Superior

15 – 19

20 – 29

30 – 39

40 – 49

50 – 59

60 +

< 35.0

< 33.0

< 31.5

< 30.2

< 26.1

< 20.5

35.0 – 38.3

33.0 – 36.4

31.5 – 35.4

30.2 – 33.5

26.1 – 30.9

20.5 – 26.0

38.4 – 45.1

36.5 – 42.4

35.5 – 40.9

33.6 – 38.9

31.0 – 35.7

26.1 – 32.2

45.2 – 50.9

42.5 – 46.4

41.0 – 44.9

39.0 – 43.7

35.8 – 40.9

32.3 – 36.4

51.0 – 55.9

46.5 – 52.4

45.0 – 49.4

43.8 – 48.0

41.0 – 45.3

36.5 – 44.2

> 55.9

> 52.4

> 49.4

> 48.0

> 45.3

> 44.2

COOPER TEST’S RESULT FOR FEMALE

FemaleRating

Age


Very Poor Poor Fair Good Excellent Superior

15 – 19

20 – 29

30 – 39

40 – 49

50 – 59

60 +

<25.0

<23.6

<22.8

<21.0

<20.2

<17.5

25.0 – 30.9

23.6 – 28.9

22.8 – 26.9

21.0 – 24.4

20.2 – 22.7

17.5 – 20.1

31.0 – 34.9

29.0 – 32.9

27.0 – 31.4

24.5 – 28.9

22.8 – 26.9

20.2 – 24.4

35.0 – 38.9

33.0 – 36.9

31.5 – 35.6

29.0 – 32.8

27.0 – 31.4

24.5 - 30.2

39.0 - 41.9

37.0 - 41.0

35.7 - 40.0

32.9 - 36.9

31.5 - 35.7

30.3 - 31.4

>41.9

>41.0

>40.0

>36.9

>35.7

>31.4

The tables below list Fit Test and Cooper Test results.

VIDEO AUDIO-L AUDIO-R

C-SAFE

3534


USING FITNESS NETWORKINGThe two RJ45 networking ports are available in the T8000 & T8000PRO. These ports allow the treadmill to be connected to a fitness entertainment system and/or a fitness network, such as FitLinxx®.

C-SAFE PORTThe C-SAFE port located next to the On/Off switch enables the treadmill to upload user workout statistics to a fitness network database.

CARDIO PORTThe Cardio port is located on the back of the console that is compatible to entertainment protocol such as Cardio Theater® or BroadcastVision™.

The Manager’s Custom Settings allow the club owner to customize the treadmill for the club.

MODEL T8000:To enter the Manager’s Custom Settings, press and hold down the "INCLINE " and "SPEED +" keys. Continue to hold down these two keys until the INSTRUCTION CENTER displays “MANAGER MENU”.1. To scroll through the list of Manager’s Custom Settings, use the SPEED + / - key. The INSTRUCTION CENTER will display, in turn, each of custom settings.2. To select a custom setting, press the SELECT or ENTER key to enter.3. To change the value of the setting, use the SPEED+ / - key or NUMBER keys.4. To confirm and save the value of the setting, press the QUICK START key. “SETTING SAVED” will appear in the INSTRUCTION CENTER. To exit the setting without saving, press the RESET key within 5 seconds, or if there is no key pressed, the system will resume automatically.

MODEL T8000PRO:To enter the Manager’s Custom Settings, press and hold down the "INCLINE " and "SPEED " keys. Continue to hold down these two keys until the INSTRUCTION CENTER displays “MANAGER MENU”.1. To scroll through the list of Manager’s Custom Settings, use the SPEED / key. The INSTRUCTION CENTER will display, in turn, each of custom settings.2. To select a custom setting, press the ENTER key to enter.3. To change the value of the setting, use the SPEED / key or LEFT / RIGHT arrow keys.4. To confirm and save the value of the setting, press the ENTER / QUICK START key. “SETTING SAVED” will appear in the INSTRUCTION CENTER. To exit the setting without saving, press the CLEAR key within 5 seconds, or if there is no key pressed, the system will resume automatically.

MANAGER’s CUSTOM SETTINGS

THE LIST OF MANAGER'S CUSTOM SETTING

P0

P1

P2

P3

P4

P5

P6

P7

P8

99 min

20 min

1

68kg / 150lbs

30

20kph / 12mph

15

N/A N/A N/A N/Ahour

N/A N/A N/A N/Ahour

10 min

10 min

1

34kg / 75lbs

10

6.4kph / 4mph

4

99 min minute

99 min

10

182kg / 400lbs

99

20kph / 12mph

15

MAXIMUM TIME

DEFAULT TIME

DEFAULT LEVEL

DEFAULT WEIGHT

DEFAULT AGE

MAXIMUM SPEED

MAXIMUM INCLINE

ACCUMU-LATEDDISTANCE

ACCUMU-LATEDTIME

CUSTOMSETTING

3736

DEFAULT MINIMUM MAXIMUM UNIT STEP DESCRIPTION


This option controls the default program time.

This option controls the default program level.

This option controls the default users ageused in the target heart rate calculations.

This option changes the maximum incline grade to 4%, 8%, 12% or 15%.

This option enables fitness club managers to set the program maximum workout duration limits during peak and non-peak hours of club traff ic. Active variable displayed in the TIME display after change.

This option controls the default weight used in the calorie calculations. Sets to de fau l t un i t change ( k i l og rams o r pounds). Displayed in native units.

Controls the maximum speed for al l programs. Displayed in nat ive units (kilometers per hour or miles per hour). Reverts to default value on unit change.

Accumulated distance is not editable, for display only. Displayed in native units ( mi les or k i lometers ) . Holding the INCLINE and SPEED keys in the T8000 (INCLINE and SPEED keys in the T8000 PRO) simultaneously to reset the accumulated distance. After the treadmill reaches the maximum distance, it will reset to “0” automatically.

1

minute 1

1

1

n/a

kg/lbs

1kph/mph

1age

N/A%

Accumulated distance is not editable, for display only. Displayed in native units ( mi les or k i lometers ) . Holding the INCLINE and SPEED keys in the T8000 (INCLINE and SPEED keys in the T8000 PRO) simultaneously to reset the accumulated distance. After the treadmill reaches the maximum distance, it will reset to “0” automatically.

P9

P10

P11

P12

P13

P14

P14-1

P16

0.8kph/0.5mph

0.8kph/0.5mph

2.4kph/1.5mph

kph/mph

60 sec 30 sec 180 sec

START SPEED

PAUSETIME

SOFTWAREVERSION

ENGLISH/METRICUNITS

MAINTENANCE LAMP

LANGUAGE

AUTOCHECK

CUSTOMSETTING DEFAULT MINIMUM MAXIMUM UNIT STEP DESCRIPTION

This is the maximum time during which a workout can remain in pause mode.

The language of the INSTRUCTION CENTER display.

The measurement unit type for weight, distance, and speed.

Cont ro l s the s ta r t ing speed fo r a l l programs (minimum speed not affected). Displayed in native units (kilometers per hour or miles per hour). Reverts to default value on unit change.

Software version is not editable, for display only.

This option enables fitness club managers to set the maintenance lamp as ON/OFF.

When the t readmi l l ' s accumula ted distance reaches the certain kilometers or miles, the maintenance lamp will light meaning maintenance is needed.

The option is to customize the color in the speed leading light located on the side rails, while the power is ON. Color display options include green, white, sky blue, yellow, blue, purple and red. (T8000 PRO Only)

Error log is not editable, for display only. Holding the INCLINE and SPEED keys in the T8000 ( INCLINE and SPEED keys in the T8000 PRO) simultaneously to erase error log.

The funct ion would c lear al l custom settings had stored on the unit as a default v a l u e . H o l d i n g t h e INCL INE a n d SPEED keys in the T8000 (INCLINE and SPEED keys in the T8000 PRO) simul-taneously to clear all custom setting as a default value.

The function is only for manufacturer use.

The function is to calibrate the treadmill’s speed and incline after the completion of the installation.

0.1

second 1

English N/A N/A N/A N/A

N/A N/A N/A N/A N/A

Metric Metric English N/A N/A

ON ON OFF N/A N/A

P15 BLUE N/A N/A N/A N/A

N/A N/A N/A N/A N/A

P17 ERROR LOG

N/A N/A N/A N/A N/A

P18 RESET ALL N/A N/A N/A N/A N/A

P19MANUFAC-TURINGTEST

N/A N/A N/A N/A N/A

MAIN-TENANCE DISTANCE

SPEED LEADINGLIGHT

4000 km/2500 miles

4000 km/2500 miles

8000 km/5000 miles

km/miles 10

The T8000 and T8000PRO are built for use in the commercial environment - 12 hours a day and seven days a week. However, as a club manager or owner, you are responsible for cleaning and maintaining the unit’s integrity. If you fail to maintain the treadmill as described below, it could affect or void the Johnson limited warranty.

DANGER: To reduce the risk of electrical shock, always unplug the treadmill from its power source before cleaning it or performing any maintenance task.

CAUTION: Any changes or modifications to this equipment could void the product warranty.

NOTE: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear. Keep the equipment out of use until defective parts are repaired or replaced.

RECOMMENDED CLEANING TIPS1) Use a damp, soft cloth with water or mild liquid detergent to clean all exposed surfaces. DO NOT use ammonia, chlorine, or acid-based cleaners.2) DO NOT pour water or cleaning solutions on any surface. This could cause electrocution.3) Check the operation of the emergency stop system once a week.4) Wipe the user’s contact areas, including console, HR handgrips, side handrails and side rails, after every use.5) Brush away any wax deposits from the deck and belt area. This is a common occurrence until the wax is worked into the belt material.6) Be sure to remove any obstructions from the path of the elevation including power cords.7) Monthly, remove the motor cover to check for debris and clean with a dry cloth or small vacuum nozzle. Unplug the unit while executing this procedure.

MAINTENANCE

3938


CENTERING THE BELTThe Johnson Treadmill is built with a crowned roller to ensure proper tracking of the belt in the centre of the deck. An 8 mm Allen wrench (A 5/16-inch hex key wrench) is required for this task. The unit has access holes in the rear roller guards which allow access to the tensioning bolts.

Before proceeding, please follow the centering belt procedure tips.1) DO NOT wear loose clothing or jeweler while making this adjustment.2) NEVER have the tensioning bolts more than 1/4 turned at a time.3) Tighten one side and loosen the other side to prevent from over-tightening or loosing the belt. Over-tightening the belt will significantly shorten the life of the belt.4) After the belt adjustment, let the treadmill run for 5 minutes to test. If necessary, repeat the procedure until the belt is centered.

If the belt has moved to the right, turn the right tension bolt a 1/4 turn clockwise and then turn the left tension bolt a 1/4 turn counter-clockwise to start the belt tracking back to the centre of the roller.

1/4 TURN

1/4 TURN

Repeat the adjustments until the belt appears centered. Allow the treadmill to continue running for several minutes at 6.4 km/h (4.0 mph) to be sure that the tracking is stabilized.NOTE: DO NOT exceed one full turn of the adjusting screws in either direction. If after one full turn the belt does not track properly, please contact Johnson Fitness or the local authorized dealers.

TENSIONING THE BELTCheck the tension of the belt. The belt should be very snug. When a person walks or runs on the belt, it should not hesitate or slip. If this occurs, turn the belt tensioning bolts a 1/4 turn clockwise for each side. Repeat if necessary until the belt no longer slips. DO NOT exceed one full turn (i.e. four 1/4 turns) per side when adjusting the belt tensioning bolts. If after tension the belt, the belt still hesitates or slips, please contact Johnson Fitness or the local authorized dealers at once.

4140


If the belt has moved to the left, turn the left tension bolt a 1/4 turn clockwise and then turn the right tension bolt a 1/4 turn counter-clockwise to start the belt tracking back to the centre of the roller.

1/4 TURN

1/4 TURN

NOTE: DO NOT over-tighten the tensioning bolts while making belt adjustments. Over-tightening of bolts may over stretch and damage the striding belt or roller bearings. DO NOT exceed one full turn of either bolt in either direction.

MAINTENANCE LAMPThere is a maintenance lamp on the console to remind the owner to do the scheduled maintenance. When the treadmill’s accumulated distance reaches 4000 kilometers / 2500 miles, the maintenance lamp will light meaning maintenance is needed. The following is the maintenance lamp key:• Blue: It means that the treadmill needs to be maintained. To turn off the maintenance light after performing service, hold the INCLINE and SPEED keys in the T8000 (INCLINE and SPEED keys in the T8000 PRO) at the same time for 3 seconds.• Red: It means that the treadmill might have a problem, and needs to be checked. Please contact Johnson Fitness customer service or local authorized dealers. Note: The accumulated distance in the maintenance lamp is set 4000 km / 2500 miles as a default value. The club owner can customize the accumulated distance for the blue maintenance light.

1/4 TURN

1/4 TURNAND

Model T8000 PRO

SteelYes

3.0 hp ACDELTA® AC motor inverterJ-Star® 1300lbs thrust motor0 – 15%0.8 – 20 kph / 0.5 – 12 mph

1" hard-wax reversible deck20.6 cm / 8”Habasit® multi-ply51cm x 153cm / 20" x 60"Variable durometer cushioning system7.6 cm / 3” diameter, precision-crowned steel, front and backOne piece extrude, integrated 7-color Speed Leading Light

Ergonomically shaped, integrated HR grip and HR indicator light56 cm (22”) long, cantilevered, integrated Swift Speed & Incline Controls

Workout Profile Window – 7” blue backlit graphic LCDInstruction Center – 14-character Alpha-Numeric LEDInformational Display – 7-segment red colored LEDTime, Speed, Distance, Calories, Incline, Level, Heart Rate, METs, ProfileAerobics – Manual, Interval, Weight Loss, Fat Burn, Target HR, RandomLandscape – Brave Hill, Lakeside, Forest, Desert, PlateauGoal – Distance Goal, Time Goal, Calories GoalPersonal Trainer – Fit Test, Cooper TestYes, 4 program quick keys and warm up / cool down direct keyNoYesYesYesPush Button & Lanyard Clip

216cm x 87cm x 139cm / 85” x 34” x 55”165 kg / 365 lbs182 kg / 400 lbs100V – 230V Dedicated Circuit Required

YesOptionalCSAFE-Ready, FitLinxx™ Certified

FrameFrame ConstructionTransport WheelsDrive SystemsDrive MotorMotor Control SystemIncline MotorIncline RangeSpeed RangeDeck & BeltDeck TypeDeck Step HeightBelt TypeRunning AreaCushion SystemRollersFoot Standing PlatformHandrailsFront HandrailSide HandrailsConsoleDisplay Type

Display ReadoutPrograms

Program Quick KeysNumeric KeypadOne-touch Quick StartHand PulseTelemetric ReceiverSafety StopsTechnical SpecificationsProduct Dimensions (LxWxH)Product WeightMaximum User WeightPower RequirementEntertainment SolutionsE-Connextion™ Control KeysJohnson LCD TV MountNetworking Capabilities

*specifications subject to change without notice.

PRODUCT SPECIFICATIONSModel T8000

SteelYes

3.2 hp DCDCI® club grade DC controllerJ-Star® 1300lbs thrust motor0 – 15%0.8 – 20 kph / 0.5 – 12 mph

1" hard-wax reversible deck20.6 cm / 8”Habasit® multi-ply 51cm x 153cm / 20" x 60"Variable durometer cushioning system7.6 cm / 3” Diameter, precision-crowned steel, front and backOne piece extrude

Ergonomically shaped, integrated HR grip56 cm (22”) long, cantilevered, integrated Speed and Incline Control

Workout Profile Window – 7” blue backlit LCD, Instruction Center – 14-character Alpha-Numeric LED, Informational Display – 7-segment red colored LEDTime, Speed, Distance, Pace, Calories, Incline, Level, Heart Rate, ProfileManual, Interval, Weight Loss, Fat Burn, 5K Run, Target Heart RateYes, 6 program quick keysYesYesYesYesPush Button & Lanyard Clip

216cm x 87cm x 139cm / 85” x 34” x 55”165 kg / 365 lbs182 kg / 400 lbs100V – 230V Dedicated Circuit Required

NoOptionalCSAFE-Ready, FitLinxx™ Certified

FrameFrame ConstructionTransport WheelsDrive SystemsDrive MotorMotor Control SystemIncline MotorIncline RangeSpeed RangeDeck & BeltDeck TypeDeck Step HeightBelt TypeRunning AreaCushion SystemRollersFoot Standing PlatformHandrailsFront HandrailSide HandrailsConsoleDisplay Type

Display ReadoutProgramsProgram Quick KeysNumeric KeypadOne-touch Quick StartHand PulseTelemetric ReceiverSafety StopsTechnical SpecificationsProduct Dimensions (LxWxH)Product WeightMaximum User WeightPower RequirementEntertainment SolutionsE-Connextion™ Control KeysJohnson LCD TV MountNetworking Capabilities

43

*specifications subject to change without notice.

42


Documents

T8000/T8000 PRO - Home : Johnson Health Tech. Co., …jhta.com.au/.../johnson_t8000_tm68_owners_manual.pdf• Model T8000 & T8000PRO Specifications 02 03 05 10 18 19 35 38 42 01 JOHNSON