Distributed by:

Call us today for details!

Since 1986, OMNEX Control Systems ULC has been design-ing and manufacturing the most secure, reliable and robust radio remote control and fixed industrial wireless solutions in the industry.

• 20 years of experience• 20 years of wireless industrial ON/OFF machine control • 17 years of industrial proportional machine control• 16 years of TRUSTED WIRELESS™ FHSS radio technology• 15 years of TRUSTED WIRELESS™ industrial I/O• 12 years of Tier 1 industrial mobile machine OEM's• 7 years of Tier 1 industrial TRUSTED WIRELESS™

technology partnerships

Delivering Armored TechnologyIt’s easy to design a radio that works. It’s difficult to design a radio that doesn’t fail. OMNEX industrial strength radios are designedto not fail. That’s why hundreds of thousands of users rely on OMNEXindustrially hardened, TRUSTED WIRELESS™ and standards-based technologies for safety, system-critical control, innovative functionality, cost-effective operation, and day-to-day machine and instrument reliability. Regardless of the job and location, you want your radios to work—all the time!

T42

the TRUSTED WIRELESS™

replacement for old

fixed-frequency or

pendant control systems.

www.omnexcontrols.com

SAFE ACCURATE RELIABLE CUSTOMIZABLE GLOBAL & LICENSE Free INTERFERENCE Free (FHSS) MAINTENANCE Free

KEY BENEFITS

• Interference Free Radio

• Extended range

• Extended battery life

• Standard Makita 9.6V battery– non proprietary

• Plug'n play

• Calibrate/Teach on the fly capability with

minimum/maximum indication

• Joystick control selection for World Standard,

Old ACPA, and Old PM configurations

• 3 – 5 section controls

• Wireless and Pendant in one

• Impact resistant

• Full diagnostics, both transmitter and receiver

• Low maintenance

The OMNEX TRUSTED WIRELESS™ T42/R42 system uses Frequency Hopping Spread Spectrum (FHSS) technology. FHSS devices concentrate their full power into a very narrow signal that randomly hops from frequency to frequency within a license-free band. This transmission pattern, along with CRC-16 error checking techniques, enables our industrially hardened FHSS signals to overcome in-terference that commonly affects licensed radios. Use our radios in downtown locations, near airports and other high interference places and you will find that our radios work smoothly, precisely and ensure interference free fail-safe operation.

Operator Keys Standard 38 functions + E-Stop, customizable to provide more functions E-Stop Switch conforms to EN 609 47-5-1, monitored for integrity Indicators & Diagnostics Battery/Pendant, Active LED & E-Stop LED status indicators Security Factory programmed-unique ID code. CRC-16 error detection Input Power Makita 9.6V DC Rechargeable NiCad Battery Battery Life 60 hours (continuous use) Operating Temp. Range -40° F to 158° F (-40° C to 70° C) Size 11.0" x 9.0" x 6.75" (279mm x 229mm x 171mm) Weight 6.0 lbs (including battery) (2.7 kg) Construction High impact, low temperature plastic, weatherproof UL 94, 746A, C, D, IEC 60695-2-20 Frequency 2.4 - 2.483GHz — ISM band Antenna Transmitter – Internal, Receiver - External Accessories 4-point harness, pendant cable, waist belt, DC Charger Approvals/Certificates USA — FCC Part 15.247 Canada — ISC RSS 210 European Union — CE (#3059) Australia — C-Tick RF Approval EN 300 - 440 HV Proximity Tested to 350kV Works with the following R2160 19 I/O, 2-way communication Receivers R170 CANbus (J1939) Expansion Modules D180 14 proportional outputs Specifications subject to change without notice

Truck mounted receiver.

Plug'n Play

Tether/Pendant

RF Connection

Isolated Ground Protection

The OMNEX TRUSTED WIRELESS™ T42/R42 is a long range, pro- grammable radio mobile control system. Compact and easy-to -use, this member of the TRUSTED WIRELESS™ family puts complete control of your Concrete Boom Truck where it’s needed most, with the operator. It’s robust, easy to install and is plug’n play. Remove your old fixed-frequency remote control system, plug in the OMNEX R42 receiver and you are ready to go. Transmitter spares can be swapped in the field without the need to ship the system back to the manufacturer. The receiver stores all of the calibration/teach parameters. All you need to do is link the receiver to the new transmitter and you are ready to go!

The T42 transmitter comes with 38 standard functions plus E-Stop and is customizable to provide more functions. The T42 is designed and programmed with the major joystick control configurations. A program Selector switch allows the operator to select World Standard, Old ACPA, or Old PM joystick configurations with- out the need to ship the system back to the factory. Using the trans- mitter’s Teach mode, the operator has the ability to calibrate the boom’s proportional valves during operation. So if a joystick is not giving you the performance you require, calibrate on the job; as you’re working. A unique ID code is used by each T42 to ensure that no two systems will conflict on a job site.

The R42 receiver can be powered from a 12VDC or 24VDC system. This TRUSTED WIRELESS™ system features 19 solid state, high-side driver input/output controls, 2-way capability and a reliable E-Stop control. Up to fourteen current-control, PWM, or voltage outputs, or a combination of these can be added.