T24 Series Catalogue 0313 - Find The Needlepdfs.findtheneedle.co.uk/22833.pdf · T24 Wireless Radio Telemetry Series Catalogue Handheld Displays Contents ... Product Order Codes 40

T24 Wireless Radio Telemetry Series

Catalogue

www.pcm-uk.com

APPROVED DISTRIBUTORS OF:


Catalogue

Handheld Displays

Contents

T24-HS: Single Input 3

T24-HA: Multiple Channel 5

T24-HR: Unlimited Inputs 8

Transmitters

T24-SA: Strain Gauge 10

T24-SAf, SAi and SAe: New Generation Fast Strain Gauge 13

T24-VA and T24-IA: New Generation Voltage and Current 16

Accessories

T24 Wireless Acquisition Modules

• T24-ACMm Mini.

• T24-ACMi for Integration.

• T24-ACM Standard.

20

T24-AO1 and T24-AO1i: Single Channel Analogue Output Module

24

T24-RM1: New Generation Relay Module 31

T24-BC1: Battery Charger 33

T24-PR1: Wireless Printer 35

T24-RDC: Remote Data Collection 37

Product Order Codes 40

T24-BSi & T24-BSu: Base Stations 27

2

3

T24-HS

Wireless Radio Telemetry Handheld Display Single Input

Features

• Portable handheld display indicator for displaying data from one sensor.

• Ability to wirelessly ‘power off’ the acqui-sition module two button tactile keypad.

• Worldwide licence exempt 2.4GHz radio.

• 120m (400feet) range maximum.

• Environmentally sealed to IP65.

Introduction The T24-HS handheld display provides one to one data display from any one of Mantracourt’s acquisition modules (strain, current, voltage). Input values are transmitted to the handheld via 2.4GHz radio allowing users to view a digital reading at distances of up to 120m (400 feet). The handheld display can ‘power off’ acquisition modules by a push of a button thereby ex-tending battery life and maintenance costs. If no buttons are pressed on the T24-HS it too will turn off after 5 minutes. The wide temperature operating range and the robust technology ensures that the module is not susceptible to harsh physical or electrical environments.

Specifications

GENERAL RADIO MIN TYPICAL MAX UNITS

Licence - Licence Exempt - -

Modulation Method - MS (QPSK) - -

Radio Type - Transceiver (2 way) - -

Data Rate - 250 - K bits/sec

Radio Frequency 2.4000 - 2.4835 GHz

Power - 1 - Mw

Range RAD24i (Integrated Antenna) - - 120 (400) Metres (feet) *

Range RAD24e (External Antenna) - - 200 (650) Metres (feet) *

Channels (DSSS) - 16 - -

* Maximum range achieved in open field site with T24-SA at a height of 3m above ground and T24-HA held at chest

4


T24-HS

Module Transmits & Receives Giving:

1. Full error detection and correction. 2. Ability to switch to low power modes. 3. Calibration and configuration via radio

telemetry.

4. Ability to be switched from sleep to oper-ating mode via radio.

5. Calibration stored within the module. 6. Remote battery check.

T24-HS—Handheld Display

ELECTRIAL MIN TYPICAL MAX UNITS

Power Supply Voltage 2.4 3.0 3.6 VDC

POWER SUPPLY MIN TYPICAL MAX UNITS

Active - 35 40 mA

Low Power Mode - 120 160 uA

Estimated Battery Life using 2Ahr Batteries :

Standby Mode (Powered Off) - 1.5 - Years

Continuous Operation - 40 - Hours

Use a pair of alkaline AA batteries. Due to higher voltage requirements of this device NiMh and NiCad batteries are not recommended.

ENVIRONMENTAL MIN TYPICAL MAX UNITS

IP Rating - IP65 - -

Operating Temperature Range -10 - +50 ºC

Storage Temperature -40 - +85 ºC

Humidity 0 - 95 %RH

Mechanical Dimensions

• CE approved.

• Complies with EMC Directive. 2004/108/EC.

• The Radio Equipment and Telecommu-nications Terminal Equipment (R&TTE) Directive. 1999/5/EC.

Approvals

5 5

T24-HA

Wireless Telemetry Mul'ple Channel Handheld Display

Features • Portable handheld indicator for displaying data

from up to 12 sensors. • Very low power consumption for long

battery life. • Worldwide licence exempt 2.4 GHz radio. • 120m (400 feet) range maximum. • Simple configuration and calibrated via PC using

base station with Telemetry Toolkit software. • Programmable wireless print capability. • 6 button tactile keypad. • Environmentally sealed to IP65.

Introduction The T24-HA is an advanced handheld with the ability to display data display from up to 12 sen-sors/acquisition modules. It will display data from any of Mantracourt’s acquisition modules (strain, voltage or current). The T24-HA has an automatic 'off' function which can ‘power off’ acquisition modules to extend battery life and reduce maintenance costs. It will also power itself 'off' and acquisition modules as well if no buttons are pressed in a specified period of time. The wide temperature operating range and the robust technology ensures that the module is not susceptible to harsh physical or electrical environments. The module can operate in two modes: • Result Mode: This default mode creates a single result by summing the values from up

to 12 acquisition modules simultaneously as well as allowing users to view the discrete values that make up the result.

• Item Mode: In this mode each acquisition module is treated as a separate entity and

the T24-HA is used to cycle through all available items.

Specifications





6


T24-HA




Power - 1 - Mw


Range RAD24e (external Antenna) - - 200 (650) Metres (feet) *


* Maximum range achieved in open field site with T24-SA at a height of 3m above ground and T24-HA held at chest height

T24-HA—Handheld Reader

ELECTRIAL MIN TYPICAL MAX UNITS



Active - 35 40 mA





Use a pair of alkaline AA batteries. Due to higher voltage requirements of this device NiMh and NiCad batteries are not recommended.





Humidity 0 - 95 %RH



telemetry.



7

T24-HA

Wireless Telemetry Mul'ple Channel Handheld Display


Approvals

• CE approved.


• The Radio Equipment and Telecommunications Terminal Equipment (R&TTE) Directive. 1999/5/EC.

8

Wireless Radio Telemetry Handheld Display Unlimited Inputs

T24-HR

Features

• Wakes and reads unlimited numbers of acquisition modules.

• Worldwide licence exempt 2.4 GHz radio. • 120m (400 feet) range maximum. • Simple configuration via PC using base

station with Telemetry Toolkit software. • Environmentally sealed to IP65. • Remote battery check.

Introduction The T24-HR is a portable battery-powered roaming handheld which allows the viewing of an unlimited number of acquisition modules. By simply ‘roaming’ past the acquisitions modules, the handheld will wake each device and display the data tag of the remote acquisition module on the LCD display. With user-friendly T24 toolkit software, the data tags can be set to allow identification of each acquisition device allowing the viewing experience to be tailored to each particular application.

Specifications

ELECTRICAL MIN TYPICAL MAX UNITS



Active - 35 40 mA









Humidity 0 - 95 %RH

9

T24-HR

Wireless Radio Telemetry Handheld Display Unlimited Inputs

PHYSICAL

Handheld Dimensions 90 x 152 x 34mm


1. Remote battery check.


Approvals

• CE approved.



10

Wireless Telemetry Strain Gauge Acquisi'on Module

T24-SA

Features • Miniature acquisition module for wireless

strain gauge measurement. • Exceptionally low power for long battery

life. • Transmits on license free 2.4GHz. • Remote ‘on’ and ‘off’ to preserve battery

life. • 120m (400 feet) range. • Simple configuration and calibration via PC

using toolkit software (included in price). • Calibratable to provide any standard engi-

neering unit output for given input.

Introduction Forming the core of the T24 range, the T24-SA strain gauge acquisition module is a high per-formance PCB board designed to be embedded alongside load cells or other strain input sen-sors to provide wireless strain gauge measurement. Options also available for wireless current (4-20mA) and voltage (0-10V) acquisition (T24-IA & T24-VA). Miniature in size, the device transmits on licence free 2.4Ghz, avoiding local radio interference to ensure data integrity and security. Data is provided in real time at variable speeds with a direct line of sight range of 120m (400 feet) which can be extended with the use of antenna’s and passive repeaters. The devices transmit to a range of receivers including handheld indicators, digital displays, analogue and serial outputs, PC display, wireless printers and has various powering options. Antenna options are also available to extend range. Also 2KHz fast version for high speed ap-plications.

Specifications







Power - 1 - Mw

11

T24-SA

Wireless Telemetry Strain Gauge Acquisi'on Module GENERAL RADIO MIN TYPICAL MAX UNITS




* Maximum range achieved in open field site with T24-SA at a height of 3m above ground and T24-HA held at chest height pointing towards the T24-SA.

PARAMETER MIN TYPICAL MAX UNITS

Strain Gauge Excitation System 4 Wire.

Strain Gauge Excitation Voltage 4.5 5 5.25 VDC

Strain Gauge Drive Capability 85 - 5000 Ω

Maximum Strain Gauge Sensitivity (FR) - - 3.2 ±mV/V

Offset Temperature Stability - 1 4 ppm/C

Gain Temperature Stability - 3 5 ppm/C

Offset Stability with Time - 20 80 ppm of FR (1)

Gain Stability with Time - - 30 ppm of FR (2)

Non Linearity Before Linearization - 5 25 ppm of FR

Internal Resolution - 16,000000/24 - Resolution/Bits

Noise Free Where Sample Time <10mS - 50,000/15.5 - Resolution/Bits

Noise Free Where Sample Time <50mS - 65,000/16 - Resolution/Bits


Noise Free Where Sample Time <1000mS - 250,000/18 - Resolution/Bits

Noise Free Where Sample Time >1000mS - 400,000/18.75 - Resolution/Bits

T24-SA Embedded Strain Gauge Digitiser

Specification with 1000R bridge, 2.5mV/V at 3V supply at 25ºC.



Power Supply Ripple - - 50 mV/AC/PK-PK

POWER SUPPLY CURRENT MIN TYPICAL MAX UNITS

Normal Mode (1K Bridge) - 60 65 mA

Standby/Low Power Mode - 5 20 uA

12

Wireless Telemetry Strain Gauge Acquisi'on Module

T24-SA




Humidity 0 - 95 %RH



telemetry.




Approvals

• CE approved.



T24-SA PCB Module

13

T24-SAf, SAi & SAe

New Genera'on Telemetry Fast Strain Gauge Acquisi'on Module

Features • 2KHz data acquisition.

• Very small size—18x40x7mm including signal conditioning module.

• 2 way radio system for data integrity.

• Remote power on/off (sleep/wake).

• 120m (400 feet) range maximum.

• Simple configuration and calibrated via PC using base station with Telemetry Toolkit software provided.

• Internal or external antenna options.

Introduction For high speed applications, provides measurements at 2KHz with 200 packets per second containing 10 x 32 bit values representing Nano volts/volt. The T24-SA is a high performance strain gauge to radio telemetry converter module, offering precision measurement with high performance two-way telemetry. Usable around the globe on licence free 2.4GHz frequency, the T24 range avoids local radio interference to ensure data integrity and security. For use in any measuring applications, from torque to weight, vibration to flow, the T24 offers users a complete solution to your measure-ment requirements. The modules form part of a simple measurement system that offers the opportunity to collect measurements from a variety of sources, enabling accurate and immediate data collection without the requirement for extensive and labour intensive cabling operations. The wide temperature operating range and the robust technology ensures that the module is not susceptible to harsh physical or electrical environments. Options include internal or exter-nal antenna.

Specifications






14


T24-SAf, SAi & SAe



Power - 1 - Mw




MEASUREMENT MIN TYPICAL MAX UNITS

Strain Gauge Excitation System 4 Wire.

Strain Gauge Excitation Voltage 4.5 5 5.25 VDC

Strain Gauge Drive Capability 85 - 5000 Ω

Maximum Strain Gauge Sensitivity (FR) - - 3.2 ±mV/V

Offset Temperature Stability - 1 4 ppm/C

Gain Temperature Stability - 3 5 ppm/C

Offset Stability with Time - 20 80 ppm of FR (1)

Gain Stability with Time - - 30 ppm of FR (2)

Non Linearity Before Linearization - 5 25 ppm of FR


Noise free resolution is 8000/13 Bytes 10 second sample.

T24-SAf

Specification with 1000R bridge, 2.5mV/V at 3V supply at 25ºC.





Normal Mode (1K Bridge) - 60 65 mA

Standby/Low Power Mode - 5 20 uA




Humidity 0 - 95 %RH

15

T24-SAf, SAi & SAe



Active - 35 40 mA

Sleep Mode (1K Bridge) - 5 - uA





1. Full error detection and correction. 2. Calibration and configuration via radio te-

lemetry. 3. Ability to be switched from sleep to operat-

ing mode via radio.

4. mV/V calibration stored within the mod-ule.

5. Remote battery check. 6. Data encryption for complete security

(128bit AES).

Mechanical Dimensions T24-Safi Internal Chip Antenna PCB Module T24 SAfe External Antenna PCB Module

The external antennas come in two styles. The flat PCB antenna can be mounted inside a plastic housing or to the outside of a metal housing. The PCB requires 3mm clearance on all edges, this also applied to the RF window.

There must be no metal objects within 7mm of the antennas long edge and 20mm from the short edges.

Approvals

• CE approved.



16

New Genera'on Telemetry Voltage & Current Acquisi'on Modules

T24-VA & T24-IA

Features • 2 way radio system for data integrity. • Very low power consumption for long

battery life. • Very small size. • Worldwide licence exempt 2.4 GHz radio. • Option of hand held remote display or PC

interface for data capture. • Remote power on/off (sleep/wake). • 120m (400 feet) range maximum. • Simple configuration and calibrated via

PC using base station with Telemetry Toolkit software.

• Internal or external antenna options.

Introduction The T24-VA and T-24 IA are high performance voltage (0-10V) and current (0-21mA calibrated to a 4-20mA range) to radio telemetry converter modules, offering precision measurement with high performance two-way telemetry. Usable around the globe on licence free 2.4GHz frequen-cy, the T24 range avoids local radio interference to ensure data integrity and security. For use in any measuring applications, from torque to weight, vibration to flow, the T24 offers users a complete solution to your measurement requirements. The modules form part of a simple measurement system that offers the opportunity to collect measurements from a variety of sources, enabling accurate and immediate data collection without the requirement for extensive and labour intensive cabling operations. Transmitting from an analogue module on 2.4 GHz to a variety of receivers including a user friendly simple 2 button handheld T24-HS which captures this data and displays it providing a line of sight communication range of typically 120 metres. The T24-HS also performs the func-tion of waking the T24-VA when it is turned on and sending it to deep sleep module when it is turned off. The wide temperature operating range and robust technology ensures that the module is not susceptible to harsh physical or electrical environments. Options include an internal or external antenna and a growing range of interface modules.

Specifications



17

T24-VA & T24-IA







Power - 1 - Mw




* Maximum range achieved in open field site with T24-SA at a height of 3m above ground and T24-HA held at chest

T24-VA Embedded Voltage 0-10V Digitiser

Specification at 3V supply at 25ºC.


Input Range Sensitivity (FR) 0 - 10 Volts

Gain Temperature Stability - - 50 ppm/ºC

Non Linearity before Linearization - 5 25 ppm of FR


Input Impedance - 100,000 - Ω

Input Calibration Accuracy - - 0.1 %FR





T24-IA Embedded Voltage 0-20mA Digitiser

Specification at 3V supply at 25ºC.


Input Range Sensitivity (FR) 0 - 21 mA

Calibrated Range 4 - 20 mA

Gain Temperature Stability - - 50 ppm/ºC

Non Linearity before Linearization - 5 25 ppm of FR


18


T24-VA & T24-IA


Input Impedance - 47 - Ω

Input Calibration Accuracy - - 0.1 %FR









Normal Mode (On Constantly) - 40 45 mA

Sleep Mode - 5 20 uA

Battery Life in Low Power Mode Generating Results a t 3Hz

USAGE BATTERY LIFE

Pair AA Cells Constantly On 1 Month

Pair AA Cells 12 sessions per day of 5 minutes 2 Years

Pair D Cells Constantly On 2.5 Months

Pair D Cells 12 sessions per day of 5 minutes 5 Years




Humidity 0 - 95 %RH


1. Full error detection and correction. 2. Ability to switch to low power modes. 3. Calibration and configuration via radio te-

lemetry.



19

T24-VA & T24-IA



Approvals

• CE approved.



20

T24-ACMm Mini/T24-ACMi for Integra'on/T24-ACM Standard

T24 Wireless Acquisi'on Modules

Introduction

The T24 data acquisition modules are used to acquire data from a variety of different sensors including; strain gauge, current (0-20mA), voltage (0-10V), pulse, temperature and potentiome-ter. They are offered in a variety of IP rated enclosures suitable for use in most applications and environments. With a range of up to 400m (using a T24-AR Active Repeater) and all battery powered, the modules offer easy connectivity and exceptional battery life. The modules come with free Te-lemetry Toolkit Software which allows the user to configure and provide data logging for up to 24 devices.

T24-ACmm Mini T24-ACMi for Integration T24-ACM Stan dard

Features at a glance... T24-ACMm T24-ACMi T24-ACM

Module Size (mm) 20x35x76.3 76.6x59x29 160x80x55

IP Rating IP50 IP65 IP65

Radio Frequency 2.4GHz 2.4GHz 2.4GHz

Antenna Integrated/PCB Mounted Internal Internal

Range Metres (ft) 100 (325) 200 (650) 200 (650)

Batteries AAA* AA D Cell

Separate Battery Box Yes No No

External Power No No Yes

Operating Temperature ⁰C -40 to +65 -40 to _65 -40 to +65

*When used with the T24-BB1.

21




T24-ACM, ACMi & ACMm Battery Supply Voltage 2.1 3.0 3.6 VDC

T24-ACM only External Supply 5 - 18 VDC






Power - 1 - Mw

Range RAD24i (Integrated Antenna) - - 100 (325) Metres (feet) **

Range RAD24e (External Antenna) - - 200 (650) Metres (feet) **


** Maximum range achieved in open field site with T24 acquisition module at a height of 3m (9.8 feet) above ground and T24-HS held at chest height pointing towards the acquisition module. Specification supplied at 25ºC.


T24-ACMm & T24-BB1 Case Dimensions: 20x35x76.30mm

Case Materials: Black ABS IP50. Flanged lid for wall or shelf mounting or suspending with a tie wrap.

Lid Depth: inc. lid 2mm (0.079”) Width: 35mm (1.38”). Length: Inc. flange 76mm (2.99”).

Power Via T24-BB1 (2x AAA battery cells alkaline). Batteries are not included.

22



T24-ACMi Case Dimensions: 76.6x59x29mm

Case Materials: Black Delrin Ertacetal-H with IP65 cable glands.

Terminals 1.5mm. Rising clamp terminals.

Accessibility All electronics accessible by removing lid and antenna.

Power Supply From ‘on-board’ batteries (2 x AA size cells Alka-line) please note these batteries are not includ-ed.

T24-ACM Case Dimensions: 160x80x55mm.

Case Materials: Light grey ABS with cable glands.

Terminals 2.5mm. Rising clamp field terminals.

Accessibility All electronics accessible by removing lid.

Power Supply

From ‘on-board’ batteries (2xD size cells, alkaline). Batteries not included. OR External power supply (5-18V.

Approvals

• CE approved.



23

24 Channel T24 Radio Telemetry Logging So2ware

T24LOG24

Features

• View data from up to 24 T24 acquisition modules.

• Configure the number of channels, log interval, display resolution etc.

• Log data to CSV file for easy viewing in MS Excel.

Introduction

This software release for Windows allows up to 24 T24 modules (T24-SA, T24-VA , T24- TA, T24-RA, T24-PA or T24-IA) to be viewed and logged to a CSV file. You can configure the number of channels, communications settings, main title and the channel descriptions and these configurations can be saved and loaded at any time.

24

T24-AO1 & T24-AO1i

Wireless Telemetry Single Channel Analogue Output Module

Features

• Range of configurable analogue outputs including 0-10V, 4-20mA, 0-20mA, ±10V, ±5V.

• Choice of enclosures depending on appli-cation.

• Simple configuration via PC using base station with Telemetry Toolkit software.

• Integrated antenna. • 1 year manufacturer warranty.

Introduction The T24-AO1 and T24-AO1i provides a configurable analogue output for the range of T24 ac-quisition modules. The T24-AO1i is housed in an IP67 housing for industrial installation whilst the T24-AO1 is designed for desktop mounting with a reduced wireless range of 20m. The output can be selected from the pre-calibrated voltage and current ranges. 0-10Volts, ±10Volts, 0-5Volts, ±5Volts, 0-20mA and 4-20mA both of which can be used in a ‘sink’ or source mode. LED’s in the T24-AO1 provides indication of the state of the radio link, remote battery life and remote status. The T24-AO1i uses open collectors outputs to relay this information A digital input allows for zeroing of the incoming data value. The T24-AO1 modules are easily configured by the T24 Toolkit and a base station.

Specifications







Power - 1 - Mw




* Maximum range achieved in open field site with T24-SA at a height of 3m (9.8425 ft) above ground and T24-AO1 held at

25


T24-AO1 & T24-AO1i

T24-AO1

PARAMETER MIN TYPICAL MAX UNITS NOTES

External Supply Voltage Range 9 12 36 Volts -

Operational Current - 85 150 mA -

Operating Temperature Range -40 - 85 ºC -

Storage Temperature Range -40 - 85 ºC -

Reverse Polarity Protection - - -36 Volts Maximum supply level.

Digital Output Drive (Voltage) - - 30 Volts -

Digital Output Drive (Current) - - 20 mA -

Digital Input Load (Impedance) - - 100 Ω -

Voltage Output


Resolution - 16 - Bits

Output Gain Stability - 0008 0.015 ±%FS/ºC

Output Zero Stability - 0.006 0.015 ±%FS/ºC

Short Term Stability (1 hour) - 0.003 0.01 ±%FS

Long Term Stability (10k hours( - 0.03 0.1 ±%FS

Residual Ripple - 40 - mV p-p

Minimum Load Impedance 5000 - - Ω

Linearity - 0.007 0.01 ±%FS

Bandwidth (-3dB) - TBD - Hz

PR

ELIM

IAR

Y R

ES

ULT

S

Current Output


Resolution - 16 - Bits

4-20mA Output Gain Stability - 0.0060 0.0120 ±%FS/ºC

4-20mA Output Zero Stability - 0.005 0.0100 ±%FS/ºC

Short Term Stability (1 hour) - 0.006 0.018 ±%FS

Long Term Stability (10k hours( - 0.06 0.2 ±%FS

Residual Ripple - 0.032 - mV p-p

Settling Time to ±0.5uA (thermal effects) - 5 - Seconds

Maximum Load Impedance - - 500 Ω

Linearity - 0.01 0.02 ±%FS

PR

ELIM

IAR

Y R

ES

ULT

S

Bandwidth (-3dB) - TBD - Hz

26

T24-AO1 & T24-AO1i


Physical Dimensions and Materials

T24-AO1 166x87x26mm ABS plastic with a soft plastic grip

T24-AO1i 190x80x55mm Light grey ABS with IP65 cable glands. All electronics accessible by


T24-AO1

T24-AO1i

Approvals

• CE approved.



27

Wireless Telemetry Base Sta'ons

T24-BSi, T24-BSu & T24-BSue

Features

• USB interface. • Dynamic Link Library (DLL) files for software

developers. • RS232 and RS485 interfaces (T24-BSi only). • Variable baud rates (T24-BSi only). • Cased or DIN Rail mounting options (T24-BSi

only). • Listen for and transmit data packages to any

device. • Up to 200m line of sight range option.

Introduction

The T24 radio telemetry range is currently supported by two base stations; the T24-BSu and the T24-BSi, which in conjunction with the T24-tool kit can be used to configure all the devices within the range. Devices can listen for and transmit data packages to any device therefore making control and group measurement very simple. T24-BSi The T24-Bsi is the industrial base station, housed in an IP65 standard enclosure. This device offers far more interface options for a user. The T24-BSi can be powered and controlled using a single USB interface; however the T24-BSi also has serial RS232 and RS485 interfaces at baud rates of 9600-460800. When using either of the serial interfaces the device must be pow-ered externally. The DLL serial interface provides the ability for customised user software to be created with the use of Visual Basic (VB) over any interface the user wishes to select. T24-BSu The T24-BSu is a simple USB device. It draws power from the USB bus and therefore no fur-ther components are required to configure and control remote devices from a PC. The T24-BSu is supported by not only the T24-toolkit but also with a DLL allowing customers using VB to develop their own custom software for their applications. T24-BSue The T24-BSue offers line of sight range of up to 200 metres for all T24 acquisition modules. Similar to the T24-BSu, it draws power from the USB bus and therefore no further components are required to configure and control remote devices from a PC. The T24-BSue is supported by not only the T24-toolkit but also with a DLL allowing customers using VB to develop their own custom software for their applications.

28


T24-BSu


USB Supply Range 4.875 5 5.125 Volts As defined by USB 2.0 Specification.

USB Bus Powered Operational Current 100 - 200 - -





Reverse Polarity Protection - - -32 Volts Maximum supply level.





Humidity 0 - 95 %RH

T24-BSu USB Base Station: Physical Dimensions and Materials

Case Dimensions 20x35x60mm.

Case Materials Black ABS IP54. Flanged lid for wall or shelf mounting or suspending with a tie wrap.

T24-BSi Industrial Base Station: Physical Dimensions and Materials

Case Dimensions 160x80x55mm.

Case Materials Light grey ABS with IP65 cable glands.

Terminals 2.5mm, rising clamp field terminals.


Power Supply From on board batteries (2xD size cells, Alkaline). Batteries not included.



External Supply Voltage Range 4.5 12 32 Volts -

USB Supply Range 4.875 5 5.125 Volts As defined by USB 2.0 Specification.

Average Operational Current - TBD 500 mA -

USB Bus Powered Operational Current 100 - 200 - -

Specification T24-BSi

29


T24-BSi Industrial Base Station

Approvals

• CE approved.





T24-BSu USB Base Station

Side View

Depth inc. lid 20mm (0.79”) Width 35mm (1.38”)

Length not inc. flange 60mm (2.36”)

30



Case Study: Wireless Monitoring Application Mountain roads are treacherous places in the winter and operatives must patrol roads to en-sure that they are clear. Snow can be kept off the roads using snow fences that are held to the mountains using steel ropes. A highways company needed to monitor and calculate the weight of the snow behind the fence and ensure that any sudden release of strain is alerted to a con-trol room at the base of the mountain. The Solution: The weight of snow being held behind a snow-fence can be calculated by monitoring the strain on the ropes which are holding the fence in place. Using telemetry strain gauge acquisition modules (T24-ACM-SA) to measure the rope strain, data is transmitted to a road-side PC that is connected to the Internet.

The T24-SA-ACM's transmit the strain value every 30 seconds to a T24-BSue which provides a range of up to 200 metres (656 feet). The measurement data is logged by the PC to a CSV file which can be downloaded remotely from the computer. The software that processes and logs the data from the T24-ACM-SA is also able to email alerts in case of any sudden release of strain in any of the ropes which may indicate an avalanche or fence failure.

31

New Genera'on Telemetry Relay Module

T24-RM1

Features

• Offers dual 240V AC 5Amp relays. • Latched relays. • Sums up to 8 T24 acquisition modules. • Alarm signal. • Up to 200m (650ft) wireless range. • Worldwide licence exempt 2.4 GHz radio. • Environmentally sealed to IP65 .

Introduction

The T24-RM1 offers power relays capable of mains power switching. These relays can be con-figured as high, low or window alarms to one or a sum of up to 8 T24 devices. Relays can be latched and a digital input or external command can be used to reset them. An alarm signal relay is operated if communications is lost or other selectable errors occur and this alarm output can be silenced by a contact free digital input. This module is supplied as standard in an IP65 sealed ABS case but a DIN rail option is available. The state of the power relays can be set as required if an error occurs.

Specifications


Supply Voltage Range 9 12 32 Volts -

Operational Current (No Relays Active) - 60 - mA At 12V Supply TBC.

Operational Current (All Relays Active) - 80 - mA At 12V Supply TBC.



5Amp Relays - 240V 5A - - -

Case Dimensions 160x80x55mm

Case Materials Light grey ABS with IP65 cable glands.

Terminals 2.5mm. Rising clamp field terminals. 6 way field connector.


Physical

32

Physical

Software Details T24 Toolkit.


Approvals

• CE approved.



T24-RM1

New Genera'on Telemetry Relay Module

33

Ba4ery Charger

T24-BC1

Introduction

The T24-BC1 is a battery charger and power sup-ply suitable for the T24 range of 3V devices. The T24 battery charger is designed to supply a constant 3.3V from a Li-ion Battery while also charging the battery from an input voltage. The unit comes pre-configured to provide a charging current of 466mA suitable for VARTA LIP653450. This module also supports additional batteries providing a charge current of 133mA via the re-moval of the leaded resistor (non surface mount).

Specifications


Supply Voltage 4.1 5 6 V

Regulated Voltage Output - 3.3 - V

Battery Positive Connection - 3.7 - V

Maximum Cable Length - - 150* Mm

Dormant PCB Current - 1.7 - uA

* 07/02 gauge wire attached to maximum load i.e. T24-SA with 4 x 350Ω strain gauges. NOTE: LED will only be lit when an input voltage is applied.

Physical Connections and Dimensions

PCB Dimensions: 17x30x3.5 (Height) mm

34

Battery Options VARTA LIP653450

• Rated Capacity: 1100mAh. • Dimensions: 35x54x7mm • Weight: 20g. • Charge Time: 3 hours at 466mA. • Battery Life with SAi & SAe: 1 month, 25

days*.

VARTA LIC18650

• Rated Capacity: 2200mAh. • Dimensions: 18.25 Diameter. 65mm Height. • Weight: 46g. • Charge Time: 4.5 hours at 466mA. • Battery Life: 3 months, 20 days*.

• Rated Capacity: 250mAh. • Dimensions: 18x31.5x5.8mm. • Weight: 6.5g. • Charge Time: 2 hours at 133mA. • Battery Life: 7 days*.

* Battery life is calculated with a T24-SA running in low power mode with a sample time of 5mS and transmit interval of 333mS for 2 hours out of every 8 hours, to a 1kΩ bridge.

UBC 581730

Approvals

• CE approved.



T24-BC1

Ba4ery Charger

35

Wireless Telemetry Printer

T24-PR1

Features

• Thermal printer with 57mm (2.244”) paper width.

• Up to 32 characters per line. • High speed printing (30mm/sec). • Capable of printing data from up to 8 acqui-

sition modules or a T24-HA advanced handheld module.

• 120m (400 feet) range maximum. • Text and formatting stored within module. • Full error detection and correction. • Simple configuration via PC using a base

station with Telemetry Toolkit software.

Introduction The T24-PR1 is a telemetry enabled printer that is capable of printing and summing values from up to 8 acquisition modules. Designed with a wide input voltage range 9-36V, this printer module is suitable for in-vehicle applications as well as more static applications. Can be sup-plied with a mains power supply for desktop use. The printer can be triggered using either software control or a T24-HA hand held device. The PC based toolkit allows users to enter up to 8 acquisition module data sources, with an option to sum all 8 components, as well as add text and format the output design. NOTE: Requires either T24-BSu or T24-BSi for configuration.

Approvals

• CE approved.



Case Details: Light grey flame retardant ABS.

36

View from Top


View from Side

Base Lid

T24-PR1

Wireless Telemetry Printer

37

Wireless Remote Data Collec'on

T24-RDC

Features • Wireless sensor inputs inside a waterproof

IP65 enclosure measuring 122x120x55mm (not including antenna and glands).

• Data delivery via email FTP, SMS and HTTP post.

• User configurable alerts on event. • Wireless sensor range of up to 200m. • Single or multichannel input, up to 200. • Easily integrated into current Mantracourt

systems. • Low power functionality for prolonging bat-

tery life. • Date and time stamped data. • Data stored in non volatile memory. • Remote configuration via SMS. • Configure with PC wirelessly up to 200m

away. • Data stored on-board in case of temporary

GPRS connection failure. • On board rechargeable battery. • One year warranty .

Introduction The remote data acquisition system has been developed to utilise the existing GPRS network to enable remote monitoring for a wide number of applications using Mantracourt’s wireless T24 inputs. Using a quadruple band GPRS modem, the wireless data collector allows users to log and report data to multiple destinations including servers, email addresses and mobile phones, allowing for world wide access to data for recording and monitoring. The remote data collector can accept data from multiple inputs including: mV/V strain meas-urement, 4-20mA, 0-10V, temperature, pulse and potentiometer. All data is time and date stamped and sent to destinations at regular intervals. Measurements are also compared to user defined limits which can trigger alert messages al-lowing real time monitoring of an entire system. Note: The RDC is a Remote Data Collection device which communicates using GSM/GPRS and therefore is bound by the restrictions and limitations of a mobile data network.

38

T24-RDC








Power - 1 - Mw




* Maximum range achieved in open field site with T24– acquisition module at a height of 3m (9.8ft) above ground and T24-HA held at chest height pointing towards the acquisition module. Specification at 3V supply at 25ºC.

Specifications


External Supply Voltage 9 12 32 Volts

Average Operational Current - TBD 500 mA

ENVIRONMENTAL MIN TYPICAL MAX UNITS NOTES

Operating Temperature -40 - +65 ºC -

Storage Temperature -40 - +65 ºC -

Reverse Polarity Protection - - -32 Volts Maximum Supply Level

QUICK TECHNICAL OVERVIEW

Dimensions 120x122x55mm.

Weight 400g.

Delivery Protocols SMS, Email, FPT, HTTP Post.

Analogue Outputs mV/V, 4-20mA, 0-10V.

Configuration Wireless via T24 and SMS.

GPRS Quad band GPRS ClaSS 10.

SIM Supports SIMs from all providers.

Inputs Up to 200 wireless devices.

39


T24-RDC


1. Full error detection and correction. 2. Ability to switch to low power modes. 3. Calibration and configuration via radio te-

lemetry.




Approvals

• CE approved.



40

Product Order Codes


Code Description

T24-ACM Wireless Radio Telemetry Acquisition Enclosure

T24-ACMi Wireless Radio Telemetry Acquisition Enclosure

T24-ANTA Wireless Radio Telemetry Antenna

T24-ANTB Wireless Radio Telemetry Antenna

T24-ANTC Wireless Radio Telemetry Antenna

T24-AO1 Wireless Radio Telemetry Desktop Analogue Output Module

T24-AO1i Wireless Radio Telemetry Industrial Analogue Output Module

T24-BB1 Battery Charger for T24 Acquisition Module ACMm ONLY

T24-BC1 Battery Charger for T24 Acquisition Modules

T24-BSi Wireless Radio Telemetry Industrial Base Station

T24-BSu Wireless Radio Telemetry Base Station USB

T24-BSue Wireless Radio Telemetry Base Station USB with Extended Range

T24-DPV Wireless Radio Telemetry T24 Data Provider Viewer and Logger

T24-HA Wireless Radio Telemetry Handheld Display Multiple Inputs

T24-HR Wireless Radio Telemetry Handheld Display Unlimited Inputs

T24-HS Wireless Radio Telemetry Handheld Display Single Inputs

T24-IA Wireless Radio Telemetry Current (4-20mA) Acquisition Module

T24-LOG24 24 Channel T24 Radio Telemetry Logging Software

41

Product Order Codes


Code Description

T24-PR1 Wireless Radio Telemetry Printer

T24-RDC-1 Wireless Remote Data Collection for 1 Channel

T24-RDC-2 Wireless Remote Data Collection for 2 Channels




T24-RM1 Wireless Radio Telemetry Data to Relay Output

T24-SA Wireless Radio Telemetry Strain Gauge/Load Cell Acq. Module

T24-SAf Wireless Radio Telemetry 2kHz Strain Gauge Acquisition Module

T24-SO Wireless Radio Telemetry Printer and Display Driver

T24-TK Wireless Radio Telemetry Toolkit Software

T24-VA Wireless Radio Telemetry Voltage (0-10V) Acquisition Module

Acquisition Modules

Select 1 Acquisition Module

T24-ACMm (Mini) T24-ACMi (for Integration) T24-ACM (Standard)

T24-SA—Strain T24-IA—Current T24-VA—Voltage

Which should give you a choice similar to this exam ple: T24-ACMi-T24-IA

Add the input of your choice from the options below .

42

Notes

43

Notes

www.pcm-uk.com

Modifications reserved. All details describe our products in general form only. PCM assumes no liability whatsoever, and disclaims any express or implied warranty,

relating to sales and/or use of PCM products including liability or warranties relating to fitness for a particular purpose.

Revision: March 2013


Catalogue

Documents

T24 Series Catalogue 0313 - Find The Needlepdfs.findtheneedle.co.uk/22833.pdf · T24 Wireless Radio Telemetry Series Catalogue Handheld Displays Contents ... Product Order Codes 40