3
T24 QUICK FACTS *VO version, driver losses not included 28 diodes per foot, 11MM on-center 82+ CRI Fully configurable for various sizes Available in 2700K, 3000K, 3500K, 4000K, Red, Blue, Green, Amber Up to 1200 lumens* per foot DMX controlled Operang tempature -10F to 102F 50,000 HRL at L70 @ 50C 70,000HRL at L70 @ 25C 5 Year Limited Warranty ETL Listed Stac White see “L24” RGB and RGBW see “C24” QUICK VIEW shown with the QW1 lens and optic layer Available in a variety of standard sizes and outputs to fit almost any architectural applicaon. Fixtures may be plugged together for long, no shadow, seamless runs up to 48 feet^ or used as individual luminares with easy-snap end caps. The unique plug and play system allows for quick, easy installaon with consistent pitch spacing. Great for millwork, niches, suspended lines, coves or slots. Populated with alternang CCT LEDs mounted 11MM on center to an aluminum substrate for superior thermal dissipaon. The T24 features posive engagement end connectors. Oponal full wiring or mounng channel available. Robust leader cables for easy energizing and remote wiring. The T24 offers complete system flexibility; 6 standard sizes readily available, with custom lengths and illuminated corners built to order. The T24 is a low voltage, remote driver system bright enough for general illuminaon or available with lower output for a warm glow. Oponal lensing, opcs and beam angles are available, please consult factory. APPLICATION Plug and play long connuous runs shown without endcap ELECTRICAL T24 - __ - __ - __ - ___ OUTPUT CCT 24 - 2400K** 27 - 2700K 30 - 3000K 35 - 3500K 40 - 4000K 55 - 5500K** LENGTH 06 - 6” 12 - 12” 18 - 18” 24 - 24” 48 - 48” 72 - 72” ORDERING INFORMATION VO - Very High Output HO - High Output MO - Medium Output SO - Standard Output 1.422” 1.075” 1.219” .925” nanometer lighting maspeth, ny 11378 p. 718.497.0394 f. 718.821.9316 57-10 49th place Example: FINISH Auto-ranging 120V to 277V mains input 48VDC Constant Voltage output Anodized aluminum finish Custom colors and finishes available, please consult factory DMX Controlled DIMMING ** Available as special order Consult factory for custom CCT and lengths ^Consult voltage drop chart for exact maximum runs Accessory optons, wiring compartments, opcs, end caps and mounng; see L24 Opons page 072515 MO 27 T24 - ___ - ____ - ___ - ____ - ____ 48 QW1 40 (two colors needed) LENSING MO 300 lm SO 200 lm MO 600 lm SO 400 lm MO 2400 lm SO 1600 lm MO 3600 lm SO 2400 lm 5.4W 3.6W 2.6W 10.8W 6.72W 4.8W 43.2W 26.88W 19.2W 64.8W 40.32W 28.8W HO 5400 lm HO 3600 lm HO 900 lm HO 450 lm Lumens Watts SIZE Lumens Watts Lumens Watts MO 900 lm SO 600 lm 16.2W 10.3W 7.4W HO 1350 lm MO 1200 lm SO 800 lm 21.6W 13.44W 9.6W HO 1800 lm LIGHT OUTPUT & POWER CONSUMPTION VERY HIGH OUTPUT HIGH OUTPUT MEDIUM OUTPUT STANDARD OUTPUT VERIFY ALL WATTAGES, DIMENSIONS AND LENGTHS DUE TO THIS RAPIDLY CHANGING TECHNOLOGY VO 600 lm VO 1200 lm VO 4800 lm VO 7200 lm 5.5W 10.9W 43.6W 65.4W Lumens* Watts VO 1800 lm 16.4W VO 2400 lm 21.8W 6” 12” 48” 72” 18” 24” QW1 - Squared Opal Lens QC1 - Squared Clear Lens QS1 - Squared Semi-translucent Lens QW2 - High Squared Opal Lens QC2 - High Squared Clear Lens QS2 - High Squared Semi-translucent Lens RW1 - Round Opal Lens RC1 - Round Clear Lens RS1 - Round Semi-translucent Lens FW1 - Flat Opal Lens FC1 - Flat Clear Lens FS1 - Flat Semi-translucent Lens

T24 - Nanometer Lightingnanoltg.com/Wp-content/Uploads/2015/08/T24-Spec-Sheet.pdfThe T24 offers complete system flexibility; 6 standard sizes readily available, with custom lengths

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: T24 - Nanometer Lightingnanoltg.com/Wp-content/Uploads/2015/08/T24-Spec-Sheet.pdfThe T24 offers complete system flexibility; 6 standard sizes readily available, with custom lengths

T24

QUICK FACTS

*VO version, driver losses not included

28 diodes per foot, 11MM on-center

82+ CRI

Fully configurable for various sizes

Available in 2700K, 3000K, 3500K, 4000K,Red, Blue, Green, Amber

Up to 1200 lumens* per foot

DMX controlled

Operating tempature -10F to 102F

50,000 HRL at L70 @ 50C70,000HRL at L70 @ 25C5 Year Limited WarrantyETL Listed

Static White see “L24”RGB and RGBW see “C24”

QUICK VIEW

shown with the QW1 lensand optic layer

Available in a variety of standard sizes and outputs to fit almost any architecturalapplication. Fixtures may be plugged together for long, no shadow, seamless runs up to 48 feet^ or used as individual luminares with easy-snap end caps. The uniqueplug and play system allows for quick, easy installation with consistent pitch spacing. Great for millwork, niches, suspended lines, coves or slots.

Populated with alternating CCT LEDs mounted 11MM on center to an aluminum substratefor superior thermal dissipation. The T24 features positive engagement end connectors. Optional full wiring or mounting channel available. Robust leader cables for easy energizing and remote wiring. The T24 offers complete system flexibility; 6 standardsizes readily available, with custom lengths and illuminated corners built to order.

The T24 is a low voltage, remote driver system bright enough for general illuminationor available with lower output for a warm glow. Optional lensing, optics and beam angles are available, please consult factory.

APPLICATION

Plug and play long continuous runs

shown without endcap

ELECTRICAL

T24 - __ - __ - __ - ___

OUTPUT CCT24 - 2400K**27 - 2700K30 - 3000K35 - 3500K40 - 4000K55 - 5500K**

LENGTH06 - 6”12 - 12”18 - 18”24 - 24”48 - 48”72 - 72”

ORDERING INFORMATION

VO - Very High OutputHO - High OutputMO - Medium OutputSO - Standard Output

1.422”

1.075”

1.219”

.925”

nanometerlighting maspeth, ny 11378

p. 718.497.0394f. 718.821.9316

57-10 49th place

Example:

FINISH

Auto-ranging 120V to 277V mains input48VDC Constant Voltage output

Anodized aluminum finishCustom colors and finishes available, please consult factory

DMX ControlledDIMMING

** Available as special order Consult factory for custom CCT and lengths^Consult voltage drop chart for exact maximum runs

Accessory optons, wiring compartments, optics,end caps and mounting; see L24 Options page

072515

MO 27T24 - ___ - ____ - ___ - ____ - ____48 QW140

(two colors needed)

LENSING

MO 300 lm SO 200 lm

MO 600 lm SO 400 lm

MO 2400 lm SO 1600 lm

MO 3600 lm SO 2400 lm

5.4W 3.6W 2.6W

10.8W 6.72W 4.8W

43.2W 26.88W 19.2W

64.8W 40.32W 28.8WHO 5400 lm

HO 3600 lm

HO 900 lm

HO 450 lm

Lumens Watts SIZE Lumens Watts Lumens Watts

MO 900 lm SO 600 lm16.2W 10.3W 7.4WHO 1350 lm

MO 1200 lm SO 800 lm21.6W 13.44W 9.6WHO 1800 lm

LIGHT OUTPUT & POWER CONSUMPTION VERY HIGH OUTPUT HIGH OUTPUT MEDIUM OUTPUT STANDARD OUTPUT

VERIFY ALL WATTAGES, DIMENSIONS AND LENGTHS DUE TO THIS RAPIDLY CHANGING TECHNOLOGY

VO 600 lm

VO 1200 lm

VO 4800 lm

VO 7200 lm

5.5W

10.9W

43.6W

65.4W

Lumens* Watts

VO 1800 lm 16.4W

VO 2400 lm 21.8W

6”

12”

48”

72”

18”

24”

QW1 - Squared Opal LensQC1 - Squared Clear LensQS1 - Squared Semi-translucent LensQW2 - High Squared Opal LensQC2 - High Squared Clear LensQS2 - High Squared Semi-translucent LensRW1 - Round Opal LensRC1 - Round Clear LensRS1 - Round Semi-translucent LensFW1 - Flat Opal LensFC1 - Flat Clear LensFS1 - Flat Semi-translucent Lens

Page 2: T24 - Nanometer Lightingnanoltg.com/Wp-content/Uploads/2015/08/T24-Spec-Sheet.pdfThe T24 offers complete system flexibility; 6 standard sizes readily available, with custom lengths

T24DIMENSIONS

nanometerlighting maspeth, ny 11378

p. 718.497.0394f. 718.821.9316

57-10 49th place

END CAP WITH HOLEFOR LEADER CABLE

(FEMALE SIDE)

in0.925 in in

in

1.21

9 in

0.925 in 1.069 in

1.42

2 in

1.51

1.35

1.157

1.30

8 in

0.955 in 0.925 in

1.21

9 in

0.925 inin

1.1

1.069 in

in1.

31

NOTE:ALL ANGLED END CAPS AVAILABLE AS LEFTS AND RIGHTSFIXTURE ANGLE IS DETERMINED BY DIRECTIONLOOKING AT FEMALE, FINISHED SIDE.BLANK SIDE WILL BE LABELED LOOKING AT NON-FINISHED SIDE

Q_2 HIGH SQUARE LENSLEFT (FACING FEMALE SIDE) Q_2 HIGH SQUARE LENS Q_1 STANDARD SQUARE LENS

LEFT (FACING FEMALE SIDE) Q_1 STANDARD SQUARE LENS

R_1 ROUNDED LENS F_1 FLAT LENSR_1 ROUNDED LENSLEFT (FACING FEMALE SIDE)

F_1 FLAT LENSLEFT (FACING FEMALE SIDE)

072515

DISCLAIMER:BE SURE TO VERIFY ALL WATTAGES, DIMENSIONS AND LENGTHS DUE TO RAPIDLY CHANGING TECHNOLOGY

Page 3: T24 - Nanometer Lightingnanoltg.com/Wp-content/Uploads/2015/08/T24-Spec-Sheet.pdfThe T24 offers complete system flexibility; 6 standard sizes readily available, with custom lengths

T24DIMENSIONS

nanometerlighting maspeth, ny 11378

p. 718.497.0394f. 718.821.9316

57-10 49th place

0.24 0.24

6”

12”

48”

72”

END CAP

SIDE VIEW

SIDE VIEWEND CAP ATTACHMENT

0.180.4

8

0.15

MALE SIDE

0.24

END CAP

072515

DISCLAIMER:BE SURE TO VERIFY ALL WATTAGES, DIMENSIONS AND LENGTHS DUE TO RAPIDLY CHANGING TECHNOLOGY