T218 GEO HUB USER GUIDE 12PP...7 (x4) (x2) C D Once securely affixed, slide into stand and screw on. Replace cover removed in illustration A. Your GEO HUB is now ready to sit upright

G E O H U B

Quick Start Guide

T218_GEO_HUB_USER_GUIDE_12PP.indd 1 11/10/2018 10:58


3

CONTENTS

LAYOUT 4

FEATURES & FUNCTIONS 5

ASSEMBLING YOUR GEO HUB 6-7

USING YOUR GEO HUB FOR THE FIRST TIME 8

WIRELESS KEYBOARDAND MOUSE 8-9

GET TO KNOW YOUR WINDOWS START SCREEN 9

DECLARATIONS 10

SAFETY INFORMATION 10

LIMITED WARRANTY 11

Note: All pictures and illustrations in this document are for your reference only and may differ from the final product.


4

LAYOUT

1

2

3

4

5

6 7 8

9 1110 12

201915 1814 1713

16 (Port below frame)


5

FEATURE FUNCTIONALITY

1 Screen display Displays FHD images on 23.8 inch screen

2 Holder Connects screen to the base

3 Base 2 footed support balances the display

4 Reset button Resets your GEO HUB

5 Power on/off Press and hold to turn the device on/off

6 Speaker Projects audio sounds

7 HDD cover 2.5” Hard Disk Drive inserted to expand storage (included)

8 Safety lock Option to physically secure your device

9 USB port 3.0 Connect USB 3.0 devices




13 LAN port Enables a wired internet connection

14 HDMI port Connect to a display via HDMI cable and switch the display to a wider screen (not included)


16 MicroSD card slot Reads & writes files stored on a MicroSD Card

17 DC-In socket Connects the supplied power adapter to mains power supply

18 Audio port (3.5 mm)

Connect a headset, headphones, microphone, or other audio equipment, to listen to stereo sound, record audio, or make web calls

19 Air vent Allows warm and cool air to pass through the GEO HUB

20 Speaker Projects audio sounds

FEATURES & FUNCTIONS


6

3mm (x4)6mm (x2)

11mm (x1)

11mm (x2)

ASSEMBLING YOUR GEO HUB

What’s in the boxYour GEO HUB comes complete with:

2.5" HDD holder (optional)

GEO HUB

Fitting the holder and standFollow these simple steps to assemble your GEO HUB:

(x4)

(x2)

A B

Lay GEO HUB faced down on a flat, clean, non-abrasive surface (e.g. desk). Remove cover, as shown above.

Place holder over 2 screw holes on back. Tighten screws with cross-head screwdriver.

Keyboard (1x AA)Mouse

(2x AAA)

Batteries not included


7

(x4)

(x2)

C D

Once securely affixed, slide into stand and screw on.

Replace cover removed in illustration A. Your GEO HUB is now ready to sit upright on your desk.

(x4)

(x2)

(x4)

(x2)

(x4)

(x2)

(x4)

(x2)

(x4)

(x2)

Lift to remove back cover of HDD section.

Disconnect HDD from ports and unscrew from fixed position.

A B

C D

Insert replacement HDD, connect to ports and screw into position.

Replace cover you removed in illustration A.

Changing a 2.5” Hard Disk DriveYour GEO HUB is supplied with a removable Hard Drive, but for users who want to remove it and insert another HDD, please follow the steps shown below. Important This is for fitting standard 2.5” HDD with SATA 3 interface connector.


8

USING YOUR GEO HUB FOR THE FIRST TIME

Turning on the device Note: This GEO HUB has been preinstalled with Windows. You will need to perform an initial setup before the GEO HUB can be used.1 Connect power cable to DC-In

port and plug into your mains power supply;

2 Press and hold the Power button for 2 seconds to turn your GEO HUB on. The GEO logo followed by the Windows start-up screen will appear;

3 The device is now ready for use.

Turning off the device You can turn off the device in two ways: 1 Press and hold the Power button

for a minimum of 4 seconds; 2 Select the Windows menu,

then click the Power option. Select to Shutdown.

Power On/Off button

DC-In port

Plug power cable into your mains power supply

Connecting to a network: 1 Select the Wi-Fi icon in the

notification area, in the lower-right corner of the screen, to view the available Wi-Fi hotspots;

2 Select an available network from the list and select Connect;

3 Input the password, if necessary, then select Connect to begin an internet connection.

Audio socket for headphones

WIRELESS KEYBOARD AND MOUSE

Wireless Keyboard, Wireless Mouse, Nano ReceiverSpecificationOperating frequency 2402 - 2480mHzVoltage 3V (1.5V*2)Current <4mAConnection 2.4G wirelessKeyboard Battery 1x AAMouse Batteries 2x AAA Channel 16 channelsRange 10 metres

Using the Keyboard and Mouse1 Insert 1 x AA battery into the

compartment on the back of the keyboard and 2 x AAA batteries into the back of mouse;

2 Slide the switch on back of the keyboard and mouse to ON position, LED will light red for a few seconds;


9

GET TO KNOW YOUR WINDOWS 10 START SCREENAccess your favourite Windows Store Apps, send/receive emails, browse the web, stream videos and view photos all from one central location.

WINDOWS 10 ICONS

Start button

Search

Microphone

Wi-Fi networks

Shut down

Access Cortana

Browse with Edge

GETTING STARTED

Display the Start menu: Select the Start button in the lower-left corner of the taskbar and easily find your favourite Apps, settings and files.Access Cortana: Get things done with your very own digital assistant. To get started, type a question in the search box, or select the microphone icon and talk to Cortana. Search: In the taskbar search box, begin typing the name of an App, setting, file or internet topic.Browse the web: Microsoft Edge gives you new ways to find stuff, manage your tabs, read e-books and write on the web. To get going, select Microsoft Edge on the Windows taskbar.Shut down your computer: Select the Start button, select the power icon, then select shut down.Note: Windows features screen may vary from image shown above.

3 Insert Nano Receiver into a USB port on your GEO HUB;

4 Wait 3-5 seconds, the keyboard and mouse will now connect and be ready to use.

Power On/OffKeyboard light indicatorsRed LED: Power On Green LED: Caps LockRed LED blinking: Batteries lowThe keyboard and mouse will power down when not in use. Once you start typing, the keyboard will turn on. To save battery power turn off your mouse and keyboard when not in use.


10

DECLARATIONSEU – Declaration of Conformity GEO Computers declares that GEO HUB complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity is available on request. GEO Computers, Building 1, Olympic Park, Olympic Way, Warrington, Cheshire WA2 0YL. Disclaimer Tactus Limited makes no representation or warranties with respect to the content of this document and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Tactus Limited reserves the right to revise this, or any other publication, and to occasionally make changes to the contents without the obligation of Tactus Limited to notify any person or organisation of such revision or changes. Disposal of Waste Electrical & Electronic Equipment (WEEE) This symbol on the product or on its packaging indicates that this product should not be treated as household waste. Instead, it should be handed over to a suitable collection point for the recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more information about the recycling of this product, please contact your local council, your household waste disposal service, or the reseller you purchased this product from.

SAFETY INFORMATIONBattery and charger safety To unplug a charger or an accessory, hold and pull the plug, not the cord. Unplug your charger when it is not in use. Do not dispose as household waste. Only use the charger supplied.Never use a damaged charger.


11

LIMITED WARRANTY Tactus Limited warrants to the end user that this product will be free from defects in materials and workmanship, in the course of normal use for a period of 12 months (1 year) from the date of purchase. This warranty covers breakdowns due to manufacturing or design faults. The warranty is subject to the following provisions: n The warranty does not cover

accidental damage, wear and tear, or negligence;

n It must be solely used for domestic purposes;

n The warranty will be rendered invalid if the product is re-sold or is damaged through any adjustment, modification or repair not authorised by us;

n Specifications are subject to change without notice;

n The manufacturer disclaims any liability for the incidental or consequential damages;

n The warranty is in addition to and does not diminish your statutory or legal right. Should you have a problem with your unit please contact your supplier, or email us at: [email protected]

Customer SupportContact us by email: [email protected] Opening hours: 9.00am - 5.00pm GMT, Monday - Friday

Need more help?Go to geo-computers.com/ user-guides to download the full user guide or visit geo-computers.com/faqs to get all of the latest information and answers you need.

Manufacturers Address: Tactus Limited, Building 1, Olympic Park, Olympic Way, Warrington WA2 0YL.

Register to activate your warranty at: geo-computers.com/warranty- registration


Intel Inside, Intel Inside logo are trademarks of Intel Corporation in the U.S and/or other countries. ©Tactus 2018. All rights reserved.

©Microsoft Corporation. ‘GEO’ & ‘GEO Logos’ are registered trademarks of Tactus Limited. Due to the company’s policy of constant improvement and refinement, the company

reserves the right to alter specification. All trademarks and copyrights are used for reference purposes only and are the property of their respective owners.

geo-computers.com


Documents

T218 GEO HUB USER GUIDE 12PP...7 (x4) (x2) C D Once securely affixed, slide into stand and screw on. Replace cover removed in illustration A. Your GEO HUB is now ready to sit upright