Upload
thermaltechnologies
View
222
Download
0
Embed Size (px)
Citation preview
8/2/2019 T1 Eave Panel Datasheet
1/1
T1 HEATED EAVE PANEL 8The T1 Panels simple integrated drip edge and oponal color-matched cover is designedto eliminate icicles, ice dams, and snow at the roofs edge. Thermal Technologies innova
ve roof snow and ice eliminaon systems are aracve and cost eecve. They ensure
that the buildings owner will not have the frustraon, property damage, and costs as-
sociated with water damage, caused by the inability of roofs to drain water during winte
months. Thermal Technologies revoluonary roof de-icing systems will extend the life of
your roof and reduce the destrucve situaons that snow and ice can inict on any roof.
SPECIFICATIONS
Material Selecon Recycled Aluminum Alloy 6063 Temper - T5
Color Spray Powder Coang Colors
Panel Size 8 x 6Designed to eliminate icicles and ice dams on roof
eaves up to 12 wide.
Heang Systems Commercial Grade-Self Regulang Heat Cable (in 100-
130 VAC or 208-277 VAC). The T1 System requires 2 feet
of Heat Trace per foot of panel. Designed for 11mm or
13 mm heat cables.
Components The 8 (T1) Heated Eave Panel System Includes Alumi-
num Alloy Snap-Loc Top, Aluminum Alloy Base Panel
Oponal Items Ambient and/or Moisture Sensor Controllers,
self-regulang heat trace for guers and downspouts
Electrical
Requirements
N.E.C. 426-28 requires 30 mA Ground Fault circuit
protecon for snow and ice melng applicaons
DATA SHEET
T1 HEATED EAVE PANEL 8
(866) 635-8123
www.thermal1.com
The T1 Panel helps protect
roofs with eaves up to 12
12
he T-Panel System melts and pre-
ents property-damaging ice dams,
he formaon of dangerous icicles
nd heavy snow load. Theres no
onger a need to shovel and scrape
way snow and ice.
Heat Cable channels are
designed to hold 11mm
or 13 mm cables.