T Zone Heated Transition Datasheet

Embed Size (px)

Citation preview

  • 8/2/2019 T Zone Heated Transition Datasheet

    1/1

    TZONE HEATED TRANSITION PANEL

    TZONE HEATED TRANSITIONThe aluminum alloy panel surrounds the available heat source; the top, boom and

    sides are in direct contact with the heat source at all mes. This is the most ecient

    use of energy and oers the best results available. This system is an excellent choice

    for homes that are located in higher elevaon, or for homes with eaves over 24 or

    for those who prefer the aracve look of the T-Zone System.

    SPECIFICATIONS

    Material Selecon UNA-CLAD Kynar 500 Painted Aluminum, 16 oz. Copper, Core-Ten,

    and other specialty opons are available.

    Color Siliconized-modied polyester coang with 30-year warranty.

    Panel Size Standard 24, 36 48 or 60 HighDesigned to help eliminate

    icicles, snow load, and ice dams on roof eaves of any size.

    Panel Types Custom Manufactured Modied Standing Seam

    or Baen Roof System.

    Heang Systems Commercial Grade-Self Regulang Heat Cable (5, 8 or 10 Wa per

    foot in 100-130 VAC or 208-277 VAC) or 3/8 PEX Hydronic Radiant

    Tubing

    Components Integrated Edge Metal, Zee & Transion Metal, 4 Aluminum Alloy

    Extrusion, J Channel End Cap.

    Oponal Items Ambient and/or Moisture Sensor Controllers,

    Self regulang heat trace for guers and downspouts

    Electrical

    Requirements

    N.E.C. 426-28 requires 30 mA Ground Fault circuit

    protecon for snow and ice melng applicaons

    The T-Zone System prevents the

    formaon of property-damaging

    ice dams, heavy snow load, and

    the formaon of dangerous

    icicles.

    Self-regulang heat cable

    and our patent pending alloy

    aluminum panels accept a variety

    of heat sources, such as hydronic

    PEX tubing pictured above.

    (866) 635-8123

    www.thermaltechusa.com