Embed Size (px)
Citation preview
DRAINAGE CHANNELS
SYSTEM MINIDrainage channel for landscaping & gardening
SYSTEM MINIProduct benefits
Problem-free self-installation
The system MINI to DIN EN 1433 is a simple modular system for problem-free self-installation. The channel does not require a concrete encasement (Type I) and can be asphalted or paved directly up against.
Ideal for house and courtyard areas, pedestrian zones, inner courtyards and car parking areas.
Optimal for paving
The straight external surfaces guarantee an easy and smoothinstallation.
Click-Locking
The gratings can easily be locked with a simple click mechanism on the channel body.
weather-resistant non-flammable
Fitting profile
The elements can easily be joined together at the front sides by means of a sensible profile.
Vertical outlet
Optionally with factory-made bore Ø110 for PP pipe Ø100 for connection to the underground pipe.
Channel body
The drainage channel body is made of fiber reinforced concrete (concrete strength class C35/45).
Gratings
1. Slotted grating galvanised (A 15)2. Mesh grating galvanised (B 125)3. Iron slotted grating (C 250)
SYSTEM MINIProduct benefits
1
3
2
SYSTEM MINIInstallation areas
House and courtyard
SYSTEM MINIInstallation areas
Pedestrian areas
Public buildings
Gardening & landscaping
Pavement
Paving (grouting)
Load bearing substructure
Frost-proofload bearing substructure
Concretey
5 mm
y (according to calculation)
A 15 B 125 / C 250
10 cm concrete C25/3015 cm concrete C25/30
SYSTEM MINIInstallation instructions
PAVEMENT
General notes
The installation instructions are only provided as a recommendation. The construction companies charged with installa-tion can naturally incorporate any of their own improvements. The construction company is responsible for the correct installation of the drainage channels.
All installed parts must be examined before installation to ensure that they are undamaged. For reasons of liability never install damaged parts and contact the supplier immediately to submit a claim.
The paving must be installed in such a way that
dynamic shearing forces do not affect the channel
sides. This is achieved by a non-positive bond of
the paving.
The edge protector in the drainage channel
must be permanently seated approx. 5 mm
lower than the adjoining surface.
SYSTEM MINIGratings
Type Art. no. Class Nominal width (mm)
Length (mm)
Inlet area cm2/m
1 Slotted grating (galvanised) 03153011 A 15 100 1000 280
03153015 500
2 Mesh grating 30/10 (galvanised)
03253011 B 125 1000 848
03253015 500
3 Iron slotted grating 03353115 C 250 450
1 2
3
SYSTEM MINIChannel body
Basic element
Art. No. 064103000
Basic element
Art. No. 064103005
Vertical outletfactory-made bore Ø110
Art. No. 064103010
Feed boxwith sealing ring Ø100 and dirt catcher
Art. No. 0641030081
Protectedaccording
to ISO 16016Datum Name
Gezeichn. 04.02.2019 JH.Kroeger
InBearbeitungStatus
Material: Gewicht: (weight)
ca. 20,6 kg
L1000MINI 2019
Zeichnungsnummer (drawing no.)
R00173-KAZ-01
cm²
%
ventilation area
pattern area N/mm²
cm²
inlet section area
bearing pressure
Erst-Auftrag: 019-19 Ersetzt
Index Änderung Auftrag Datum Name
10005 6 139
98138
120
Protectedaccording
to ISO 16016Datum Name
Gezeichn. 04.02.2019 JH.Kroeger
InBearbeitungStatus
Material: Gewicht: (weight)
ca. 10,3 kg
L500MINI 2019
Zeichnungsnummer (drawing no.)
R00173-KAZ-02
cm²
%
ventilation area
pattern area N/mm²
cm²
inlet section area
bearing pressure
Erst-Auftrag: 019-19 Ersetzt
Index Änderung Auftrag Datum Name
5005 6 139
98138
120
Protectedaccording
to ISO 16016Datum Name
Gezeichn. 04.02.2019 JH.Kroeger
InBearbeitungStatus
Material: Gewicht: (weight)
ca. 10,3 kg
L500MINI 2019
Zeichnungsnummer (drawing no.)
R00173-KAZ-02
cm²
%
ventilation area
pattern area N/mm²
cm²
inlet section area
bearing pressure
Erst-Auftrag: 019-19 Ersetzt
Index Änderung Auftrag Datum Name
5005 6 139
98138
120
Protectedaccording
to ISO 16016Datum Name
Gezeichn. 04.02.2019 JH.Kroeger
InBearbeitungStatus
Material: Gewicht: (weight)
ca. 8,7 kg
L1000 - AblaufMINI 2019
Zeichnungsnummer (drawing no.)
R00173-KAZ-03
cm²
%
ventilation area
pattern area N/mm²
cm²
inlet section area
bearing pressure
Erst-Auftrag: 019-19 Ersetzt
Index Änderung Auftrag Datum Name
98138
120
1395200
1000
6Ø110
Protectedaccording
to ISO 16016Datum Name
Gezeichn. 04.02.2019 JH.Kroeger
InBearbeitungStatus
Material: Gewicht: (weight)
ca. 8,7 kg
L1000 - AblaufMINI 2019
Zeichnungsnummer (drawing no.)
R00173-KAZ-03
cm²
%
ventilation area
pattern area N/mm²
cm²
inlet section area
bearing pressure
Erst-Auftrag: 019-19 Ersetzt
Index Änderung Auftrag Datum Name
98138
120
1395200
1000
6Ø110
Protectedaccording
to ISO 16016Datum Name
Gezeichn. 04.02.2019 JH.Kroeger
InBearbeitungStatus
Material: Gewicht: (weight)
ca. 28,8 kg
EinlaufkastenMINI 2019
Zeichnungsnummer (drawing no.)
R00173-KAZ-04
cm²
%
ventilation area
pattern area N/mm²
cm²
inlet section area
bearing pressure
Erst-Auftrag: 019-19 Ersetzt
Index Änderung Auftrag Datum Name
332
360
500154
98138
DN 100
Type Art. No.
End piece 7001600
Pipe joint DN 100 7002100
End piece DN 100
SYSTEM MINIAccessories
HYDROTEC Technologies AGDüngstruper Strasse 46 27793 WildeshausenGermany
+49 4431 9355-0
+49 4431 9355-99
www.hydrotec.com
05/2020
