Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Desk DK-510
Paper Feed CabinetPC-415 (2,500)
Paper Feed CabinetPC-215 (500 × 2)
Paper Feed CabinetPC-115 (500 × 1)
Desk DK-705
System
Note: Some options are not listed.
Mount Kit MK-730Used for banner printing.
Keypad KP-101
Local Interface Kit EK-608Voice guidance
Local Interface Kit EK-609Voice guidance / Bluetooth LE
Security Kit SC-508* Two SC-508 are required.
Trans-KitTK-101
Trans-KitTK-101
SelectOne
SelectOne
Output Tray OT-506
Staples MS-10A* for FS-537/FS-537SD
*1 JS-602 and PI-507 cannot be installed at the same time.
Post Inserter PI-507*1
When attached to Finisher FS-537/FS-537SD, allows you to add white paper cover sheet/inter sheet, and operate the Finisher manually.
Job Separator JS-602*1
When attached to the FS-537/FS-537SD, this becomes the fax/print/copy output separator tray.
MustSelect
SelectOne
• A5 (Short edge feed) to A3
• 500 sheets × 1• 52 to 256 g/m2
* Cannot be selected with FS-536/FS-536SD/ FS-537/FS-537SD installed.
• A5 (Short edge feed) to A3
• 500 sheets × 2• 52 to 256 g/m2
• A4/Letter (Long edge feed)
• 2,500 sheets• 52 to 256 g/m2
Z Folding Unit ZU-609Z-folding function
Image Controller (Fiery) IC-416
Video Interface Kit (Fiery) VI-510
MustSelect
SelectOne One of the options may be selected (not mandatory).
Once of the options must be selected (mandatory).
Fax Kit FK-514For 1st / 2nd line
* 1st line : Requires Main Unit + one FK-514 2nd line: Requires Main Unit + two FK-514
Stamp Unit SP-501
Clean Unit CU-102
Double feed detection Kit UK-501
HDD Mirroring Kit HD-524 For Mirroring
Working Table WT-506
Mount Kit MK-735For IC card authentication installationBuilt into front panel.
Authentication Unit AU-201S IC card type * WT-506 or MK-735 is required.
However, AU-102 cannot be combined when equipped with WT-506.
Authentication Unit AU-102 Biometric type * WT-506 is required. Select
One
Upgrade kit UK-212Wireless LAN kit
bizhub Connector S-1/G-1/E-1
Finisher FS-533Inner finisher* This unit can only be installed in the bizhub C558/C458.
Job Separator JS-506Inner job separator* This unit can only be installed in the bizhub C558/C458.
Punch kit PK-519
Staple Kit SK-602* for FS-536/FS-536SD
Staple Kit SK-602
Relay Unit RU-513
Finisher FS-537A high-performance finisher that allows you to multi- staple up to 100 sheets.
Relay Unit RU-513
Finisher FS-537SDA high-performance finisher that allows you to multi-staple, saddle stitching, half folding and tri-folding features.
Relay Unit RU-513
Punch Kit PK-520Attaches to Finisher FS-536/FS-536SD for hole punching capability (paper up to 300 g/m2 thick)
Punch Kit PK-523Attaches to Finisher FS-537/FS-537SD for hole punching capability (paper up to 300 g/m2 thick)
Finisher FS-536A compact and high- performance finisher with multi-staple up to 50 sheets.
Relay Unit RU-513
Finisher FS-536SDA compact and high- performance finisher with multi-staple, saddle stitching, half folding and tri-folding features.
Large Capacity Unit LU-302Increases the bizhub‘s paper capacity by 3,000 sheets for paper up to A4 size and 80 g/m2 thick.
Large Capacity Unit LU-207Increases the bizhub‘s paper capacity by 2,500 sheets for paper up to SRA3 and 80 g/m2 thick.
Specifcations
bizhub C658/C558/C458 General Specifications
Scanning SpecificationsType Full-Colour Scanner
Interface Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
Driver TWAIN Driver, HDD TWAIN Driver
Protocol TCP/IP (FTP, SMB, SMTP, WebDAV) (IPv4/IPv6)
Scanning Speed (Colour/B&W) Simplex 120 opm
(300 dpi, A4) Duplex 240 opm
Scanning Size Max. A3 (11" × 17")
Output Format TIFF, JPEG, PDF, Compact PDF, XPS, Compact XPS, OOXML (pptx,
xlsx*, docx*), Searchable PDF*, PDF/A*, Linearised PDF* *Optional
Scanning Resolution Push 200 dpi / 300 dpi / 400 dpi / 600 dpi
Pull 100 dpi / 200 dpi / 300 dpi / 400 dpi / 600 dpi
Main Functions Scan to E-Mail, Scan to FTP, Scan to BOX (HDD), Scan to PC (SMB), Network TWAIN, Scan to WebDAV, Scan to Me, Scan to Home, Scan to USB, Scan to Scan Server, Scan to Web Service (WSD-Scan), Device Profile for Web Services (DPWS)
Other Functions Multi-Method Send, Authentication at the time of E-Mail send
(SMTP authentication, POP before SMTP), S/MIME, Annotation
Fax Kit FK-514 (Optional) Communication Super G3
Compatible Lines Public Switch Telephone Network, Private Branch Exchange,
Fax Communication Line
Line Density G3 (8 dot/mm × 3.85 line/mm, 600 × 600 dpi)
Modem Speed 2.4 to 33.6 kbps
Compression MH/MR/MMR/JBIG
Sending Paper Size Max. A3 (Long Length Support: Max.1,000 mm)
Recording Paper Size Max. A3 (Long Length Max. 1,000 mm — following the page division —)
Transmission Speed Less than 3 sec. (A4, V.34, 33.6 kbps, JBIG)
Memory Shared with the copier
Number of Abbr. Dials 2,000
Number of Program Dials 400
Number of Group Dials 100
Sequential Multiple Station Transmission Max. 600
SMTP, POP
Connection Mode Full-Mode
Sending Paper Size A3, B4, A4
Recording Paper Size Max. A3
Resolution 200 × 100 dpi, 200 × 200 dpi, 400 × 400 dpi, 600 × 600 dpi
Interface Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
Colour Support Colour Internet Fax
Format Send: TIFF-F, Receive: TIFF-F ,Colour/Grey Scale: TIFF (RFC3949 Profile-C)
Internet FaxProtocol
IP Address Fax *Optional Fax Kit FK-514 is required.
Protocol Transmission SMTP
Sending Paper Size A3, B4, A4
Resolution 200 × 200 dpi, 400 × 400 dpi, 600 × 600 dpi
Format Send: TIFF-F, Receive: TIFF-F
Colour/Grey Scale: TIFF (RFC3949 Profile-C)
Type Single pass simultaneous duplex system
Support Paper Size A3 to A6*1, 11" × 17" to 5-1/2" × 8-1/2", Foolscap*2 (8-1/2" × 13-1/2", 200 × 330 mm, 8-1/8" × 13-1/4", 8-1/2" × 13", 8-1/4" × 13", or 8" × 13"), 8K, 16K
Mixed Size Support
Original Set Centre guide
Support Paper Weight Simplex: 35 to 210 g/m2, Duplex: 50 to 210 g/m2, Mixed Original: 50 to 128 g/m2
FAX Mode: 35 to 210 g/m2 (Simplex), 50 to 210 g/m2 (Duplex)
Paper Capacity Max. 300 sheets (80 g/m2)
Productivity Simplex Colour/B&W: 120 opm(A4, 600 dpi, copy mode) Duplex Colour/B&W: 240 opm
Power Requirements Supplied from the MFP main body
Max. Power Consumption 104.5 W or less
Dimensions [W] × [D] × [H] 618 × 575 × 180 mm (24-1/4" × 22-3/4" × 7")
Weight Approx. 15.1 kg (33-1/4 lb)
Dual Scan Document Feeder
*1 Short edge feed *2 Set by Customer engineer
*1 Supports the 32-bit (x86) or 64-bit (x64) environment.
Fiery Image Controller IC-416 (Optional) * Optional Video Interface Kit VI-510 is required.
Type Embedded
CPU Intel Pentium G850 2.9 GHz
Memory 2 GB
HDD 500 GB
Print Speed Same as Copy Speed (when using the same original)
Print Resolution 1,800 dpi (equivalent) × 600 dpi (at smoothing) or
1,200 dpi × 1,200 dpi (in 1,200 dpi mode)
PDL PCL 6, Adobe PostScript 3 (3020)
Protocol Ethernet (Apple Talk, TCP/IP), HTTP/HTTPS, SSL/TLS for HTTPS, SMB,
Port9100 (Bi-Directional), IPP, LDAP, IPV6, SNMP v3
Support OS Windows Vista*1 / 7*1 / 8.1*1 / 10*1
Windows Server 2008*1 / 2008 R2 / 2012 / 2012 R2 Mac OS X (10.7 / X 10.8 / X 10.9 / X 10.10 / X 10.11)
Fonts Adobe PS 138 Roman fonts, Agfa PCL 80 Roman fonts and 1 bitmap font,
Additional PCL 35 fonts, Euro Currency Resident Font
Interface Ethernet (10BASE-T/100BASE-TX/1000BASE-T)
Finisher FS-533 (For bizhub C558/C458 Only) (Optional)Type Finisher
Support Paper Type Thin paper/Plain paper (52 to 90 g/m2), Thick paper (91 to 300 g/m2), Transparency, Envelope, Label sheet, Letterhead paper, Banner paper, Index paper
Support Paper Size SRA3 to A5, B6*1, A6*1, Foolscap*2 (8-1/2" × 13-1/2", 200 × 330 mm, 8-1/8" × 13-1/4",8-1/2" × 13", 8-1/4" × 13", 8" × 13"), 8K, 16K, Banner paper (210 × 457.3 to 297 × 1,200 mm)
Mode Sort, Group, Offset Sort, Offset Group, Staple
Stacking Capacity 500 sheets (52 to 90 g/m2, A4*1 or smaller) 250 sheets (52 to 90 g/m2, B4 or larger) 10 sheets (91 to 300 g/m2, special paper)
Staple Capacity 50 sheets (52 to 90 g/m2, A4*1 or smaller) 30 sheets (52 to 90 g/m2, B4 or larger) 2 sheets (91 to 209 g/m2, as cover pages)
Power Requirements Supplied from the MFP main body
Max. Power Consumption 40 W or less
Dimensions [W] × [D] × [H] 472.5 × 583.5 × 194.7 mm (18-1/2" × 23" × 7-3/4")
Weight Approx. 12 kg (26-1/2 lb)
*1 Short edge feed *2 Set by Customer engineer
Job Separator (For bizhub C558/C458 Only) JS-506 (Optional) Support Paper Type Tray 1 Thin paper/Plain paper (52 to 90 g/m2), Thick paper (91 to 300 g/m2),
(Weight) Transparency, Envelope, Label sheet
Tray 2 Thin paper/Plain paper (52 to 90 g/m2), Thick paper (91 to 300 g/m2),
Transparency, Envelope, Label sheet, Banner paper
Support Paper Size SRA3 to A5, B6*1, A6*1, Foolscap*2 (8-1/2" × 13-1/2", 200 × 330 mm, 8-1/8" × 13-1/4", 8-1/2" × 13", 8-1/4" × 13", 8" × 13"), 8K, 16K, Banner paper (210 × 457.3 to 297 × 1,200 mm)
Stacking Capacity Tray 1 100 sheets (52 to 90 g/m2)
Tray 2 150 sheets (52 to 90 g/m2)
Power Requirements Supplied from MFP main body
Max. Power Consumption 24 W or less
Dimensions [W] × [D] × [H] 451 × 469 × 130 mm (17-3/4" × 18-7/16" × 5-1/8")
Weight Approx. 1.5 kg (3-1/4 lb)
*1 Short edge feed *2 Set by Customer engineer
Type Desktop Full Colour Printer / Copier / Scanner
Colour Support Full colour
Copy Resolution Scan Main: 600 dpi × Sub: 600 dpi
Print 1,800 dpi (equivalent) × 600 dpi
Gradation 256
Memory Capacity (Std./Max.) 4 GB
HDD 250 GB
Original Type Sheets, Books, Objects
Max. Original Size A3 (11" × 17")
Output Size Main unit: SRA3*1, A3 wide (311.1 × 457.2 mm, 304.8 × 457.2 mm), A3 to A5 Mutliple bypass tray: SRA3, A3 wide (304.8 × 457.2 mm), A3 to A5, B6*2, A6*2, Foolscap*3 (8-1/2" × 13-1/2", 200 × 330 mm, 8-1/8" × 13-1/4", 8-1/2" × 13", 8-1/4" × 13", 8" × 13"), 8K, 16K, Banner paper (210 × 457.3 to 297 × 1,200 mm)*4
Image Loss Max. 4.2 mm or less for top edge (5 mm for thin paper), Max. 3.0 mm or less for bottom edge, Max. 3.0 mm or less for right/left edges *A loss of 4.2 mm each during printing.
Warm-Up Time*5 (23°C, std. voltage) Colour/B&W: Colour/B&W: Colour/B&W: 35/22 sec. or less 28/28 sec. or less 25/25 sec. or less
Colour/B&W: Colour/B&W: Colour/B&W: 35/22 sec. or less 28/28 sec. or less 25/25 sec. or less
First Copy Out Time*6 Colour: 4.0 sec. or less Colour: 4.4 sec. or less Colour: 5.1 sec. or less
B&W: 3.0 sec. or less B&W: 3.5 sec. or less B&W: 4.0 sec. or less
Copy Speed (A4) Colour/B&W: 65 ppm Colour/B&W: 55 ppm Colour/B&W: 45 ppm
Copy Fixed Same Magnification 1: 1±0.5% or less
Magnification Scaling Up 1: 1.154/1.224/1.414/2.000
Scaling Down 1: 0.866/0.816/0.707/0.500
Preset 3 types
Zoom 25 to 400% (in 0.1% increments)
Lengthwise Crosswise 25 to 400% (in 0.1% increments)
Individual Settings
Paper Capacity Tray 1 500 sheets (up to A3)
(80 g/m2) Tray 2 500 sheets (up to SRA3)
Multiple Bypass Tray 150 sheets (up to SRA3)
Max. Paper Capacity (80 g/m2)*7 6,650 sheets
Paper Weight Tray 1 / 2 52 to 256 g/m2
Multiple BypassTray 60 to 300 g/m2
Multiple Copy 1 to 9,999 sheets
Auto Duplex Paper Size Width: 100 to 320 mm, Length: 148 to 457.2 mm
Paper Weight 52 to 256 g/m2
Power Requirements AC220 to 240 V 9 A (50 to 60 Hz)
Max. Power Consumption 2.1 kW or less 2.0 kW or less
Dimensions [W] × [D] × [H] 615 × 693 × 961 mm (24-1/4" × 27-1/4" × 37-3/4")
Weight Approx. 110 kg (242-1/2 lb)
Space Requirements [W] × [D]*8 937 × 1,267 mm (37" × 50")
bizhub C658 bizhub C558 bizhub C458
*1 SRA3 paper can be used in Tray2. *2 Short edge feed *3 Set by Customer engineer
*4 Printing on banner paper can only be performed from a a PC.
*5 May vary depending on the operating environment and usage.
*6 A4 long edge feed full size/using the first tray/scanning from the original glass surface.
*7 With options installed.
*8 Without options, with paper trays pulled out, and multiple bypass tray, auxiliary tray and ADF opened.
* The time required to start printing when both the main power and sub-power switches are turned from OFF to ON.
* The time required to start printing when the mainpower switch is ON and the sub-power switch is turned
from OFF to ON.
Printer SpecificationsType Embedded
CPU SOC (1,600 MHz) (DualCore)
Memory Shared with the copier
Print Speed Same as Copy Speed (when using the same original)
HDD 250 GB (Shared with the copier)
Print Resolution 1,800 dpi (equivalent) × 600 dpi (at smoothing) or
1,200 dpi × 1,200 dpi (in 1,200 dpi mode)*1
PDL PCL 5e/c Emulation, PCL 6 Emulation,
PostScript 3 (3016) Emulation, XPS (Ver.1.0)
Protocol TCP/IP (LPD, Raw, SMB, IPP)
Support OS Windows Vista*2 / 7*2 / 8.1*2 / 10*2
Windows Server 2008*2 / 2008 R2 / 2012 / 2012 R2 Mac OS X (10.7 / 10.8 / 10.9 / 10.10 / 10.11) Linux
Fonts PCL 80 Roman fonts
PS 137 Roman Type1 fonts
Interface Ethernet (10BASE-T/100BASE-TX/1000BASE-T),
USB 1.1, USB 2.0, USB Host
*1 Output speed will be reduced.
*2 Supports the 32-bit (x86) or 64-bit (x64) environment.
Specifcations
Authentication Unit (IC Card type) AU-201S (Optional)Applicable Card FeliCa (IDm), SSFC, FCF, FCF (campus), FeliCa Private,
TypeA MIFARE (UID), NFC (Host Card Emulation)
Interface USB 2.0
Power Supply Power received from USB port
Dimensions [W] × [D] × [H] 98 × 64 × 13 mm (3-7/8" × 2-1/2" × 1/2") (not including projections)
Weight Approx. 100 g (1/4 lb)
Authentication Unit (Biometric type) AU-102 (Optional)Biometric Sensor System Transmission-type optical system
Interface USB 2.0
Verification Time Approx. 1 sec. or less
Max. Power Consumption DC 5 V 500 mA
Dimensions [W] × [D] × [H] 59 × 82 × 74 mm (2-1/4" × 3-1/4" × 3")
Weight Approx. 96 g (1/4 lb) (excluding USB cable)
Z Folding Unit ZU-609 (For FS-537/FS-537SD) (Optional)Applicable Finisher FS-537/FS-537SD
Z Fold Paper Size A3, B4, 11" × 17", 8-1/2" × 14", 8K
Z Fold Paper Weight 52 to 90 g/m2
Power Requirements Supplied from FS-537/FS-537SD
Dimensions [W] × [D] × [H] 101 × 506 × 186 mm (4" × 19-15/16" × 7-5/16")
Weight Approx. 4.5 kg (9-15/16 lb)
Type Finisher
Support Paper Type Thin paper/Plain paper (52 to 90 g/m2), Thick paper (91 to 300 g/m2), Transparency, Envelope, Label sheet, Letterhead paper, Banner paper, Index paper
Support Paper Size SRA3 to A5, B6*1, A6*1, Foolscap*2 (8-1/2" × 13-1/2", 200 × 330 mm, 8-1/8" × 13-1/4",8-1/2" × 13", 8-1/4" × 13", 8" × 13"), 8K, 16K, Banner paper (210 × 457.3 to 297 × 1,200 mm)
Mode Sort, Group, Offset Sort, Offset Group, Staple
Stacking Output tray 1 200 sheets (52 to 90 g/m2)Capacity (Sub tray) 20 sheets (91 to 300 g/m2, special paper)
Output tray 2 3,000 sheets (FS-537SD: 2,500 sheets) (52 to 90 g/m2, A4*1 or smaller) (Main tray) 1,500 sheets (52 to 90 g/m2, B4 or larger) 500 sheets (52 to 90 g/m2, A5 or smaller) 20 sheets (91 to 300 g/m2, special paper)
Staple Capacity Max. 100 sheets (52 to 90 g/m2)
Power Requirements Supplied from the MFP main body
Max. Power Consumption 140 W or less
Dimensions [W] × [D] × [H] 622 × 692 × 1,031 mm (24-1/2" × 27-1/4" × 40-9/16")
Weight Approx. 47 kg (103-5/8 lb)
Finisher FS-537 (Optional)
*1 Short edge feed *2 Set by Customer engineer
Finisher FS-536 (Optional)Type Finisher
Support Paper Type Thin paper/Plain paper (52 to 90 g/m2) , Thick paper (91 to 300 g/m2), Transparency, Envelope, Label sheet, Letterhead paper, Banner paper, Index paper
Support Paper Size SRA3 to A5, B6*1, A6*1 Foolscap*2 (8-1/2" × 13-1/2", 200 × 330 mm, 8-1/8" × 13-1/4", 8-1/2" × 13", 8-1/4" × 13", 8" × 13"), 8K, 16K, Banner paper (210 × 457.3 to 297 × 1,200 mm)
Mode Sort, Group, Offset Sort, Offset Group, Staple
Stacking Output tray 1 200 sheets (52 to 90 g/m2)Capacity (Sub tray) 20 sheets (91 to 300 g/m2, special paper)
Output tray 2 3,000 sheets (FS-536SD: 2,000 sheets) (Main tray) (52 to 90 g/m2, A4*1 or smaller, B5 or larger) 1,500 sheets (52 to 90 g/m2, B4 or larger) 500 sheets (52 to 90 g/m2, A5 or smaller) 20 sheets (91 to 300 g/m2, special paper)
Output tray 3 100 sheets (52 to 90 g/m2) (Relay Unit top surface) 20 sheets (91 to 300 g/m2, special paper)
Staple Capacity 50 sheets (Plain Paper 52 to 90 g/m2) 48 sheets (Plain paper 52 to 90 g/m2) + 2 sheets (Thick paper 91 to 209 g/m2) 30 sheets (Thick paper 91 to 120 g/m2) 15 sheets (Thick paper 121 to 209 g/m2)
Power Requirements Supplied from the MFP main body
Max. Power Consumption 105 W or less
Dimensions [W] × [D] × [H] 528 × 641 × 1,023 mm (20-3/4" × 25-1/4" × 40-1/4")
Weight Approx. 36 kg (79-3/8 lb)
*1 Short edge feed *2 Set by Customer engineer
Paper Feed Cabinet PC-115/PC-215/PC-415 (Optional)Model PC-115 PC-215 PC-415
Support Paper Type (Weight) Thin paper/Plain paper (52 to 90 g/m2), Thick paper (91 to 256 g/m2)
Support Paper Size A3 to A5*1, 11" × 17" to 8-1/2" × 11", A4*3
Foolscap*2 (8-1/2" × 13-1/2", 8-1/2" × 13", (8-1/2" × 11"*3) 8-1/4" × 13", 8" × 13") , 8K, 16K*3
Paper Capacity Top tray Plain paper: 500 sheets, (Tray 3) Thick paper: 150 sheets
Bottom tray Plain paper: 500 sheets, (Tray 4) Thick paper: 150 sheets Plain paper: 2,500 sheets, Thick paper: 1,000 sheets
Power Requirements Supplied from the MFP main body
Dimensions [W] × [D] × [H] 615 × 652 × 246 mm (24-1/4" × 25-3/4" × 9-3/4")
Unit Configuration Paper tray, 1 level Paper tray, 2 levels
Weight Approx. 26 kg (57-5/16 lb) Approx. 28 kg (61-3/4 lb) Approx. 27 kg (59-1/2 lb)
*1 Short edge feed *2 Set by Customer engineer *3 Long edge feed
Large Capacity Unit LU-207/
LU-302 (Optional)
*1 The maximum number of loadable sheets for each paper size is 2,500 sheets (for 80 g/m2) or 2,750 sheets (for 60 g/m2)
*2 Long edge feed
* Thick paper 1: 91 to 120 g/m2, Thick paper 1+: 121 to 157 g/m2, Thick paper 2: 158 to 209 g/m2, Thick paper 3: 210 to 256 g/m2
Model LU-207 LU-302
Support Paper Type (Weight) Thin paper/Plain paper (52 to 90 g/m2), Thick paper (91 to 256 g/m2)
Support Paper Size SRA3 to A4, 12" × 18" to 8-1/2" × 11"*1 A4*2 (8-1/2" × 11"*2)
Paper Capacity Plain paper: 2,500 sheets (80 g/m2)/ Plain paper: 3,000 sheets (80 g/m2)/ 2,750 sheets (60 g/m2) 3,300 sheets (60 g/m2) Thick paper 1: 2,000 sheets, Thick paper 1: 2,500 sheets, Thick paper 1+: 1,450 sheets, Thick paper 1+: 1,750 sheets, Thick paper 2: 1,250 sheets, Thick paper 2: 1,550 sheets, Thick paper 3: 1,000 sheets Thick paper 3: 1,300 sheets
Power Requirements Supplied from the MFP main body
Max. Power Consumption 22 W or less
Dimensions [W] × [D] × [H] 629 × 556 × 405 mm (24-3/4" × 22" × 16") 367 × 528 × 405 mm (14-1/2"× 20-3/4" × 16")
Weight Approx. 27 kg (59-1/2 lb) Approx. 18 kg (39-3/4 lb)
Punch Kit PK-519 (For FS-533)/PK-520 (For FS-536/FS-536SD)/
PK-523 (For FS-537/FS-537SD) (Optional)Model PK-519 PK-520 PK-523
Applicable Finisher FS-533 Finisher FS-536/FS-536SD Finisher FS-537/FS-537SD
Number of holes 2 holes or 4 holes
Support Paper Type (Weight) Thin paper/Plain paper Thin paper/Plain paper (52 to 90 g/m2), (52 to 90 g/m2), Thick Thick paper (91 to 300 g/m2) paper (91 to 157 g/m2)
Support Paper Size A3 to B5, 11" × 17" to A3 to B5, 11" × 17" to A3 to A5, 11" × 17" to 7-1/4" × 10-1/2" 7-1/4" × 10-1/2", 5-1/2" × 8-1/2", 8" × 13", 16K, 8K 16K, 8K
Power Requirements Supplied from Supplied from Finisher Supplied from Finisher
Finisher FS-533 FS-536/FS-536SD FS-537/FS-537SD
Max. Power Consumption 17 W or less
Dimensions [W] × [D] × [H] 110.2 × 483.5 × 203.2 mm 61 × 492 × 142 mm 146.2 × 639.2 × 233.8 mm (4-1/2" × 19" × 8") (2-1/2" × 19-1/2" × 5-1/2") (5-3/4" × 25-1/4" × 9-1/4")
Weight Approx. 3.2 kg (7 lb) Approx. 1.8 kg (4 lb) Approx. 4.5 kg (10 lb)
Job Separator JS-602 (For FS-537/FS-537SD) (Optional)Applicable Finisher FS-537/FS-537SD
Support Paper Type (Weight) Plain paper (60 to 90 g/m2)
Support Paper Size A3, B4, A4, B5, A5*1, Foolscap*2 (8-1/2" × 13-1/2", 200 × 330 mm, 8-1/8" × 13-1/4", 8-1/2" × 13", 8-1/4" × 13", 8" × 13"), 11" × 17", 8-1/2" × 14", 8-1/2" × 11", 10-1/2" × 8", 7-1/4"× 10-1/2", 5-1/2"× 8-1/2"*1, 8K, 16K
Power Requirements Supplied from FS-537/FS-537SD
Max. Power Consumption 5 W or less
Dimensions [W] × [D] × [H] 341 × 537 × 149 mm (13-1/2" × 21-1/4" × 5-3/4")
Weight Approx. 1.75 kg (3-3/4 lb)
*1 Short edge feed *2 Set by Customer engineer
*1 Short edge feed
Finisher FS-536SD/
FS-537SD (Optional)Model FS-536SD FS-537SD
Support Paper Type Centre Staple: 52 to 90 g/m2
Half-Fold: 52 to 209 g/m2
(more than 91 g/m2 Thick paper can be used only as a cover page) Tri-Fold: 52 to 90 g/m2
Support Paper Size Centre Staple and Fold, Half-Fold: SRA3, A3 Wide, A3, B4, A4*1, 12-1/4" × 18", 11" × 17", 8-1/2" × 14", 8-1/2" × 11", 8K Tri-Fold: A4*1, 8-1/2" × 11"*1, 16K*1
Maximum Number of Sheets that 20 (52 to 90 g/m2) sheets, orcan be Centrestapled 19 (90 g/m2) sheets + Thick (209 g/m2) 1 sheet
Maximum Number of Folded Sheets Half-Fold: 5 sheets or Thick paper (91 to 209 g/m2) 1 sheet,
Tri-Fold: 3 sheets
Stacking Capacity 1 to 3 sheets: 20 sets, 1 to 5 sheets: 35 sets 4 to 10 sheets: 10 sets 6 to 10 sheets: 11 to 20 sheets: 5 sets 25 sets (paper length: 330 mm or less), Tri-Fold (1 sheet): 30 sets, 30 sets (paper length: over 330 mm) Tri-Fold (2-3 sheets): 10 sets 11 to 20 sheets: 15 sets Tri-Fold (1 sheet): 50 sets, Tri-Fold (2 sheets): 40 sets, Tri-Fold (3 sheets): 30 sets
Power Requirements Supplied from the MFP main body
Max. Power Consumption 140 W or less
Dimensions [W] × [D] × [H] 528 × 641 × 1,023 mm 635 × 692 × 1,031 mm
(20-3/4" × 25-1/4" × 40-1/4") (25" × 27-1/4" × 40-9/16")
Weight Approx. 60 kg (132-1/4 lb) Approx. 73 kg (161 lb)
Post Inserter PI-507 (For FS-537/FS-537SD) (Optional)Applicable Finisher FS-537/FS-537SD
Support Paper Type (Weight) Plain paper (60 to 90 g/m2), Thick paper (91 to 209 g/m2)
Support Upper A4, B5, A5*1, 8-1/2" × 11", 7-1/4" × 10-1/2",Paper Size Tray 5-1/2" × 8-1/2"*1, 16K
Lower A3 Wide, A3, B4, A4, B5, A5*1, Foolscap*2 (8-1/2" × 13-1/2", Tray 200 × 330 mm, 8-1/8" × 13-1/4", 8-1/2" × 13",8-1/4" × 13", 8" × 13"), 12" × 18", 11" × 17", 8-1/2" × 14", 8-1/2" × 11", 10-1/2" × 8", 7-1/4" × 10-1/2", 5-1/2" × 8-1/2"*1, 8K, 16K
Paper Capacity 200 sheets (Plain paper, 80 g/m2)
Power Requirements Supplied from Finisher FS-537/FS-537SD
Dimensions [W] × [D] × [H] 513 × 635 × 222 mm (20-3/16" × 25" × 8-3/4")
Weight Approx. 12 kg (26-7/16 lb)
*1 Long edge feed *2 Set by Customer engineer
i-Option
Encrypted PDF or PDF/A (1a/1b)
Voice guidance*1
Searchable PDF
Barcode font (Code39, QR Code, PDF417)
Unicode font
OCR font (OCR-A, OCR-B (PCL))
File format extension package
ThinPrint function
Server-less Pull Printing function
TPM function Not available in China.
Note
i-Option LK-102 v3
i-Option LK-104 v3
i-Option LK-105 v4
i-Option LK-106
i-Option LK-107
i-Option LK-108
i-Option LK-110 v2
i-Option LK-111
i-Option LK-114
i-Option LK-115 v2
Model Function
*1 Device Connection I/F Kit EK-608 or EK-609 is required.
bizhub C658 (C558/C458) + PC-215 (PC-115/PC-415/DK-510) + OT-506 bizhub C558 (C458) + PC-215 (PC-115/PC-415/DK-510) + FS-533
bizhub C658 (C558/C458) + PC-215 (PC-115/PC-415/DK-510) + RU-513 + FS-536SD + MK-730
bizhub C658 (C558/C458) + PC-215 (PC-115/PC-415/DK-510) + LU-207 (LU-302) + RU-513 + FS-537SD + PI-507 + ZU-609 + MK-730
1,267
693937
615
322
2521,560.5
535.5
1,207779
182
246
130 627
757 615 547
2,025
1,119
182 252615
937
170
When sliding+170
367 (LU-302) (When sliding + 452)
629 (LU-207) (When sliding + 452)
1,187
405
1,1061,062
1,822
530130 615 547
1,023
Space Requirements Dimensions (unit: mm)
04/2017