Upload
nguyenthien
View
221
Download
0
Embed Size (px)
Citation preview
SYSTEM F2.10aluminum-substructure forrainscreen cladding FACADES
ContentsSystem F2.10 Smart Fixing Systems
Units Page
Contents 6 - 0
Overview metric 6 - 1
Construction depth (table) metric 6 - 2
Horizontal section metric 6 - 3
Horizontal section -internal corner metric 6 - 4
Horizontal section- window detail metric 6 - 5
Vertical section metric 6 - 6
Horizontal section -external corner metric 6 - 7
Vertical section- joint of profile metric 6 - 8
Vertical section-window detail metric 6 - 9
Vertical section-window detail metric 6 - 10
Vertical section- parapet detail metric 6 - 11
Vertical section- bottom detail metric 6 - 12
Note: The realisation of the pictured fasteners can be carried out alternatively as tapping screw
(Ø 4,8x19) or rivet (Ø 5 aluminium/stainless steel or stainl.steel/stainl.steel) .
Footnote 1): The width of the ventilation area depends on local building specifications
(standards) and object specific physical requirements.
WWW.gvfacades.net Page 6 - 0
ALLFACEFACADES
WWW.gvfacades.net
WWW.gvfacades.net
WWW.gvfacades.net
WWW.gvfacades.net
WWW.gvfacades.net
WWW.gvfacades.net
WWW.gvfacades.net